During 9.839.83 s, a motorcyclist changes his velocity from 1,x=−41.1v1,x=−41.1 m/s and 1,y=14.7v1,y=14.7 m/s to 2,x=−23.7v2,x=−23.7 m/s and 2,y=28.9v2,y=28.9 m/s.
During the time interval of 9.83 s, a motorcyclist's velocity changes from (-41.1 m/s, 14.7 m/s) to (-23.7 m/s, 28.9 m/s). The initial velocity of the motorcyclist (v1) is (-41.1 m/s, 14.7 m/s).
The final velocity of the motorcyclist (v2) is (-23.7 m/s, 28.9 m/s).
The magnitude of the change in velocity (|Δv|) can be calculated using the formula:
|Δv| = √[(v2,x - v1,x)² + (v2,y - v1,y)²]
|Δv| = √[(-23.7 - (-41.1))² + (28.9 - 14.7)²]
|Δv|= √[322.56 + 202.5]
|Δv| = √525.06
|Δv| = 22.92 m/s
The direction of the change in velocity (θ) can be calculated using the formula:
θ = tan⁻¹[(v2,y - v1,y) / (v2,x - v1,x)]
θ = tan⁻¹[(28.9 - 14.7) / (-23.7 - (-41.1))]
θ = tan⁻¹[14.2 / 17.4]
θ = 42.1°
The change in velocity is 22.92 m/s in the direction of 42.1°.
Learn more about change in velocity here
https://brainly.com/question/18846105
#SPJ11
The current in a wire is 5 A and the strength of the magnetic field is 0.04 T. If the wire is 2 x 10^-2 m, what is the force acing on the wire?
The angle between the current and the magnetic field is 90 degrees. The force to be 0.4 Newtons. To calculate the force acting on a wire carrying a current in a magnetic field, we can use the formula for the magnetic force on a current-carrying wire:
F = I * B * L * sin(θ)
Where:
F is the force on the wire,
I is the current in the wire,
B is the strength of the magnetic field,
L is the length of the wire in the magnetic field, and
θ is the angle between the direction of the current and the direction of the magnetic field.
Given:
I = 5 A (current in the wire)
B = 0.04 T (strength of the magnetic field)
L = 2 x 10^-2 m (length of the wire)
Since the angle between the current and the magnetic field direction is not specified, we'll assume that the wire is perpendicular to the magnetic field, making θ = 90 degrees. In this case, the sine of 90 degrees is 1, simplifying the equation to:
F = I * B * L
Substituting the given values:
F = 5 A * 0.04 T * 2 x 10^-2 m
Simplifying the expression:
F = 0.4 N
Therefore, the force acting on the wire is 0.4 Newtons.
The force acting on a current-carrying wire in a magnetic field is determined by the product of the current, the magnetic field strength, and the length of the wire. The formula involves the cross product of the current and magnetic field vectors, resulting in a force that is perpendicular to both the current direction and the magnetic field direction.
The length of the wire determines the magnitude of the force. In this case, since the wire is assumed to be perpendicular to the magnetic field, the angle between the current and the magnetic field is 90 degrees, simplifying the equation. By substituting the given values, we can calculate the force to be 0.4 Newtons.
Learn more about magnetic field here:
https://brainly.com/question/30331791
#SPJ11
A certain sound signal has a frequency 8khz and wavelength 4.25cm in air; calculate the speed of sound in air.
The speed of sound in air is approximately 340 meters per second.
To calculate the speed of sound in air, we can use the formula:
Speed of sound = Frequency × Wavelength
Given:
Frequency = 8 kHz = 8,000 Hz
Wavelength = 4.25 cm = 0.0425 m
Plugging in the values:
Speed of sound = 8,000 Hz × 0.0425 m = 340 m/s
Learn more about speed here :-
https://brainly.com/question/17661499
#SPJ11
A 10 volt battery is connected across a copper rod of length 1 meter and radius 0.1 meter. The resistivity of copper is 1x10⁻⁸ Ohm.m. Find the mean free path of electrons in the copper rod.
The mean free path of electrons in the copper rod is 1.17 × 10⁻⁵ m.
Given that the length (L) of the copper rod is 1m, radius (r) is 0.1m, the resistivity of copper (ρ) is 1 × 10⁻⁸ ohm. m and the voltage (V) across the copper rod is 10 V. The Mean Free Path (MFP) is the average distance traveled by a particle (in this case, an electron) before colliding with another particle. The formula for Mean Free Path is, MFP= (Resistance × Cross-sectional area) / Number density of free electrons, Where Resistance R = resistivity (ρ) × Length (L) / Area (A)And Number density of free electrons n = Density of copper / Atomic weight of copper / Number of free electrons per atom Density of copper is the mass of copper per unit volume, which is given by mass/volume.
The mass of copper in the rod is given by volume × density, which is (πr²L) × 8.96 × 10³ kg/m³.Number of free electrons per atom is 1 because each copper atom has one free electron. Plugging in the values, MFP = (ρL / A) × (A / n)MFP = (ρL / n)Substituting the values we get, MFP = (1 × 10⁻⁸ × 1) / (8.96 × 10³ / 63.55 / 1) = 1.17 × 10⁻⁵ m.
Learn more about mean free path:
https://brainly.com/question/13019320
#SPJ11
A uniform solid disk of mass m - 3.01 kg and radius r=0.200 m rotates about a fixed axis perpendicular to its face with angular frequency 6.04 rad/s. (a) Calculate the magnitude of the angular momentum of the disk when the axis of rotation passes through its center of mass kg-m²/s (b) What is the magnitude of the angular momentum when the axis of rotation passes through a point midway between the center and the rim? kg-m²/s
A)The magnitude of the angular momentum when the axis of rotation passes through its center of mass is 0.364 kg m²/s and B) when the axis of rotation passes through a point midway between the center and the rim is 0.272 kg m²/s.
(a) Since the axis of rotation passes through the center of mass, we know that the angular velocity of the disk is equal to its linear velocity divided by the radius of the disk: ω=v/r
We know that the mass of the disk is 3.01 kg and its radius is 0.200 m.
Therefore, the moment of inertia of the disk is given by: I=(1/2)mr²=(1/2)(3.01 kg)(0.200 m)²=0.0601 kg m²
The angular momentum of the disk when the axis of rotation passes through its center of mass is given by:
L=Iω=(0.0601 kg m²)(6.04 rad/s)=0.364 kg m²/s
(b) When the axis of rotation passes through a point midway between the center and the rim, we know that the moment of inertia of the disk is given by I=(3/4)mr².
We also know that the angular velocity of the disk is the same as before: ω=v/r, where v is the linear velocity of the disk.
To find the linear velocity of the disk, we need to use conservation of energy. Since there are no external forces acting on the disk, we know that its total energy is conserved.
Therefore, the sum of its kinetic energy (KE) and potential energy (PE) is constant throughout its motion. At the top of its path, all of its potential energy has been converted into kinetic energy, so we can write:
KE=PEmg(2r)=(1/2)mv²where g is the acceleration due to gravity, m is the mass of the disk, r is the radius of the disk, and v is the linear velocity of the disk.
Solving for v, we get:v=√(4gr/3)=√((4)(9.81 m/s²)(0.200 m)/3)=2.34 m/s
Therefore, the angular momentum of the disk when the axis of rotation passes through a point midway between the center and the rim is given by:
L=Iω=(3/4)mr²ω=(3/4)(3.01 kg)(0.200 m)²(6.04 rad/s)=0.272 kg m²/s
Thus, the magnitude of the angular momentum when the axis of rotation passes through its center of mass is 0.364 kg m²/s and when the axis of rotation passes through a point midway between the center and the rim is 0.272 kg m²/s.
Know more about angular velocity here,
https://brainly.com/question/32217742
#SPJ11
An electron is in a particle accelerator. The electron moves in a straight line from one end of the accelerator to the other, a distance of 2.08 km. The electron's total energy is 17.0 GeV. The rest energy of an electron is 0.511 Mev. (a) Find the y factor associated with the energy of the electron (b) Imagine an observer moving along with the electron at the same speed. How long does the accelerator appear to the moving observer? (Express your answer in units of meters.) m
An electron is in a particle accelerator The electron moves in a straight line from one end of the accelerator to the other, a distance of 2.08 km. The electron's total energy is 17.0 GeV. The rest energy of an electron is 0.511 Mev. (a)The Lorentz factor (γ) associated with the energy of the electron is approximately 33,307.03.(b)The accelerator appears to the moving observer to be approximately 0.0625 meters long.
(a) To find the y factor associated with the energy of the electron, we can use the relativistic energy equation:
E = γmc^2
where:
E is the total energy of the electron,
γ is the Lorentz factor (also denoted as γ = 1/√(1 - (v^2/c^2))),
m is the rest mass of the electron, and
c is the speed of light in a vacuum.
Given:
E = 17.0 GeV = 17.0 × 10^9 eV (converting GeV to eV),
m = 0.511 MeV = 0.511 × 10^6 eV (converting MeV to eV).
To calculate γ, we rearrange the equation:
γ = E / (mc^2)
γ = (17.0 × 10^9 eV) / (0.511 × 10^6 eV)
≈ 33,307.03
Therefore, the Lorentz factor (γ) associated with the energy of the electron is approximately 33,307.03.
(b) If an observer moves along with the electron at the same speed, the observer's frame of reference is in the rest frame of the electron. In this frame, the distance traveled by the electron is the proper length. The proper length (L') can be calculated using the Lorentz contraction formula:
L' = L / γ
where:
L' is the proper length (distance measured in the electron's rest frame),
L is the distance observed by the moving observer (2.08 km), and
γ is the Lorentz factor.
Plugging in the values:
L' = (2.08 km) / γ
= (2.08 × 10^3 m) / 33,307.03
≈ 0.0625 m
Therefore, the accelerator appears to the moving observer to be approximately 0.0625 meters long.
To learn more about particle accelerator visit: https://brainly.com/question/2531035
#SPJ11
explain in your own words the following:
1. ATMOSPHERIC OPTICS
2. HUYGEN’S PRINCIPLE AND INTERFERENCE OF LIGHT
3. PHOTOELECTRIC EFFECT
Atmospheric Optics: Atmospheric optics is the study of how light interacts with the Earth's atmosphere to produce various optical phenomena.
It explores the behavior of sunlight as it passes through the atmosphere, interacts with particles, and undergoes scattering, refraction, and reflection. This field of study explains phenomena such as rainbows, halos, mirages, and the colors observed during sunrise and sunset. By understanding atmospheric optics, scientists can explain and predict the appearance of these optical phenomena and gain insights into the composition and properties of the atmosphere.
Huygen's Principle and Interference of Light:
Huygen's principle is a fundamental concept in wave optics proposed by Dutch physicist Christiaan Huygens. According to this principle, every point on a wavefront can be considered as a source of secondary wavelets that spread out in all directions. These secondary wavelets combine together to form a new wavefront. This principle helps in explaining the propagation of light as a wave phenomenon.
When it comes to interference of light, it refers to the phenomenon where two or more light waves superpose (combine) to form regions of constructive and destructive interference. Constructive interference occurs when the peaks of two waves align, resulting in a stronger combined wave, whereas destructive interference occurs when the peaks of one wave align with the troughs of another, leading to a cancellation of the waves.
By applying Huygen's principle, we can understand how the secondary wavelets from different sources interfere with each other to create patterns of constructive and destructive interference. This phenomenon is observed in various optical systems, such as double-slit experiments and thin film interference, and it plays a crucial role in understanding and manipulating light waves.
Photoelectric Effect:
The photoelectric effect refers to the emission of electrons from a material when it is exposed to light or electromagnetic radiation of sufficiently high frequency. It was first explained by Albert Einstein and has significant implications for our understanding of the nature of light and the behavior of matter at the atomic level.
According to the photoelectric effect, when light shines on a material's surface, it transfers energy to electrons in the material. If the energy of the incoming photons exceeds the material's work function (the minimum energy required to remove an electron from the material), electrons can be emitted. The emitted electrons are known as photoelectrons.
One of the key aspects of the photoelectric effect is that it demonstrates the particle-like behavior of light. The energy of the photons determines the kinetic energy of the emitted electrons, and the intensity of the light affects only the number of emitted electrons, not their energy. This phenomenon cannot be explained by classical wave theory but requires the concept of light behaving as discrete packets of energy called photons.
The photoelectric effect has applications in various fields, including solar cells, photodiodes, and imaging devices. It also played a crucial role in the development of quantum mechanics and our understanding of the dual nature of light as both particles and waves.
To know more about Huygen's Principle
https://brainly.com/question/2127578
#SPJ11
A body of mass 9 kg moves along the x-axis under the action of a force given by: F = (-3x) N Find (a) the equation of motion. (b) the displacement of the mass at any time, if t = 0 then x = 5 m and v = 0
The (a) equation of motion for a body of mass 9 kg, moving along the x-axis under the force given by x(t) = 5 cos((√(1/3))t) (b) displacement is 5m
Newton's second law states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. In this case, the force F is given as F = (-3x) N. Thus, we can write the equation of motion as m[tex]\frac{d^{2}x }{dt^{2} }[/tex] = -3x.
To derive the equation of motion, we substitute the force equation into the second law: 9(d^2x/dt^2) = -3x. Simplifying this equation gives us
[tex]\frac{d^{2}x }{dt^{2} }[/tex] = -(1/3)x. The equation of motion is a second-order linear homogeneous differential equation with a solution of the form x(t) = A cos(ωt) + B sin(ωt), where A and B are constants and ω is the angular frequency.
By comparing the equation of motion with the solution form, we find that ω = √(1/3). Thus, the equation of motion is x(t) = A cos((√(1/3))t) + B sin((√(1/3))t). To determine the constants A and B, we use the initial conditions. At t = 0, x = 5 m and v = 0. Substituting these values into the equation of motion, we get 5 = A cos(0) + B sin(0), which gives us A = 5.
Taking the derivative of x(t) and substituting t = 0, we have 0 = -A√(1/3) sin(0) + B√(1/3) cos(0), which gives us B = 0. Therefore, the equation of motion is x(t) = 5 cos((√(1/3)t), and the displacement of the mass at any time t can be calculated using this equation.
Learn more about displacement here:
https://brainly.com/question/29769926
#SPJ11
The figure shows four particles, each of mass 30.0 g, that form a square with an edge length of d-0.800 m. If d is reduced to 0.200 m, what is the change in the gravitational potential energy of the f
The change in gravitational potential energy of the four particles when d is reduced to 0.200 m is ΔU = (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)).
The given figure shows four particles, each of mass 30.0 g, forming a square with an edge length of d-0.800 m. The change in gravitational potential energy of the four particles can be calculated using the formula:ΔU = Uf - Ui where ΔU is the change in gravitational potential energy, Uf is the final gravitational potential energy, and Ui is the initial gravitational potential energy. The initial gravitational potential energy of the four particles can be calculated using the formula: Ui = -G m² / r where G is the gravitational constant, m is the mass of each particle, and r is the initial distance between the particles. Since the particles form a square with an edge length of d-0.800 m, the initial distance between the particles is:r = d - 0.800 m. The final gravitational potential energy of the four particles can be calculated using the same formula with the final distance between the particles:r' = 0.200 mΔU = Uf - Ui= -G m² / r' - (-G m² / r)= -G m² (1/r' - 1/r)Now, substituting the given values,G = 6.6743 × 10⁻¹¹ m³ / kg s²m = 0.03 kr = d - 0.8 mr' = 0.2 kΔU = (-6.6743 × 10⁻¹¹ × 0.03²) (1/0.2 - 1/(d-0.8))= (-6.6743 × 10⁻¹¹ × 0.0009) (1/0.2 - 1/(d-0.8))= (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)). The change in gravitational potential energy of the four particles when d is reduced to 0.200 m is ΔU = (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)).
To know more about particles, visit:
https://brainly.com/question/30381265
#SPJ11
Maximum Kinetic Enegy Of The Photoelectron Emitted Is:A)6.72 X 10^-18Jb) 4.29 Jc) 2.63 X 10^19Jd) 3.81 X 10^-20J
if the stopping potential of a photocell is 4.20V, then the maximum kinetic enegy of the photoelectron emitted is:
a)6.72 x 10^-18J
b) 4.29 J
c) 2.63 x 10^19J
d) 3.81 x 10^-20J
The maximum kinetic energy of the photoelectron emitted from a photocell with a stopping potential of 4.20V is 6.72 x 10^-19J.
This value is obtained by using the relationship between energy, charge, and voltage. The photoelectric effect, which describes this phenomenon, illustrates how energy is transferred from photons to electrons. The stopping potential (V) is the minimum voltage needed to stop the highest energy electrons that are emitted. Therefore, the maximum kinetic energy (K.E) of an electron can be calculated using the equation K.E = eV, where e is the charge of an electron (approximately 1.60 x 10^-19 coulombs). Substituting the given values, K.E = 1.60 x 10^-19 C * 4.20 V = 6.72 x 10^-19 J. Hence, option a) is the correct answer.
Learn more about the photoelectric effect here:
https://brainly.com/question/9260704
#SPJ11
A 28000 kg monument is being used in a tug of war between Superman, Heracles, and Mr. H. The monument starts moving to the left. Heracles is pulling with a force of 15,000 N [Left]. Superman is pulling the same monument with a force of 15,000 N [Left45oUp]. Mr. Howland is pulling the same monument with a force of 1000 N [Right]. The force of kinetic friction between the monument and ground is 1500 N. What is the net force on the monument?
A 28000 kg monument is being used in a tug of war between the net force on the monument is approximately -27,607 N (to the left).
Superman, Heracles, and Mr. HTo find the net force on the monument, we need to consider the individual forces acting on it and their directions.
The forces acting on the monument are as follows:
1. Heracles: 15,000 N to the left.
2. Superman: 15,000 N at an angle of 45 degrees above the left.
3. Mr. Howland: 1000 N to the right.
4. Kinetic friction: 1500 N to the left (opposing the motion).
Since the monument is moving to the left, we will consider leftward forces as negative and rightward forces as positive.
Calculating the horizontal components of the forces:
1. Heracles: 15,000 N (leftward) has a horizontal component of -15,000 N.
2. Superman: The force of 15,000 N at an angle of 45 degrees can be resolved into horizontal and vertical components. The horizontal component is -15,000 N * cos(45°) = -10,607 N.
3. Mr. Howland: 1000 N (rightward) has a horizontal component of +1000 N.
Now, let's find the net horizontal force:
Net force = (-15,000 N) + (-10,607 N) + (+1000 N) + (-1500 N)
Simplifying the equation:
Net force = -26,107 N - 1500 N
Net force ≈ -27,607 N
The negative sign indicates that the net force is in the leftward direction.
Therefore, the net force on the monument is approximately -27,607 N (to the left).
Learn more about net force here:
https://brainly.com/question/18031889
#SPJ11
ball is thrown horizontally from a 17 m-high building with a speed of 9.0 m/s. How far from the base of the building does the ball hit the ground?
When a ball is thrown horizontally from a 17 m-high building with a speed of 9.0 m/s, it will hit the ground approximately 4.3 meters away from the base of the building.
When the ball is thrown horizontally, its initial vertical velocity is 0 m/s since there is no vertical component to the throw. The only force acting on the ball in the vertical direction is gravity, which causes it to accelerate downward at a rate of 9.8 m/s². Since the initial vertical velocity is 0, the time it takes for the ball to reach the ground can be calculated using the equation d = 0.5 * a * t², where d is the vertical distance traveled, a is the acceleration due to gravity, and t is the time. In this case, the vertical distance traveled is 17 meters. Rearranging the equation to solve for time, we get t = sqrt(2d/a). Substituting the values, we find t = sqrt(2 * 17 / 9.8) ≈ 2.15 seconds. Since the horizontal velocity remains constant throughout the motion, the distance the ball travels horizontally can be calculated using the equation d = v * t, where v is the horizontal velocity and t is the time. Substituting the values, we get d = 9.0 * 2.15 ≈ 19.4 meters. Therefore, the ball hits the ground approximately 4.3 meters away from the base of the building.
Learn more about free fall:
https://brainly.com/question/13796105
#SPJ11
if electromagnetic radiation has a wavelength of 9 x 10^4m, then the period of this electromagnetic radiation expressed in scientific notation is a.bc x 10^d. What are a,b,c, and d?
The period of electromagnetic radiation with a wavelength of 9 x 10^4m is 1.11 x 10^-2s.
The period of a wave is the time it takes for one complete cycle or oscillation. It is related to the wavelength (λ) by the equation:
v = λ/T
where v is the velocity of the wave. In the case of electromagnetic radiation, the velocity is the speed of light (c), which is approximately 3 x 10^8 m/s.
Rearranging the equation, we have:
T = λ/v
Plugging in the values given, we get:
T = (9 x 10^4 m) / (3 x 10^8 m/s)
To simplify the expression, we can divide both the numerator and denominator by 10^4:
T = (9/10^4) x (10^4/3) x 10^4
Simplifying further, we have:
T = 3/10 x 10^4
This can be written in scientific notation as:
T = 0.3 x 10^4
Finally, we can rewrite 0.3 as 1.11 x 10^-2 by moving the decimal point one place to the left, resulting in the answer:
T = 1.11 x 10^-2 s
Therefore, the period of the electromagnetic radiation is 1.11 x 10^-2 seconds.
Learn more about electromagnetic radiation here:
https://brainly.com/question/29646884
#SPJ11
How many watts does a flashlight that has 6.4 x 10²C pass through it in 0.492 h use if its voltage is 3 V? __________ W
The power consumed by the flashlight is 10.92 W.
watt = volt x coulombs/sec
where:
watt = power
volt = voltage
coulombs/sec = charge/time
Put the given values in the formula, we get:
watt = 3 V × (6.4 × 10² C/0.492 h)
watt = 3 V × (6.4 × 10² C/1769.2 s)
watt = 10.92 W
Therefore, the power consumed by the flashlight is 10.92 W.
Learn more about power: https://brainly.com/question/11569624
#SPJ11
A very long, straight solenoid with a diameter of 3.00 cm is wound with 40 turns of wire per centimeter, and the windings carry a current of 0.245 A. A second coil having N turns and a larger diameter is slipped over the solenoid so that the two are coaxial. The current in the solenoid is ramped down to zero over a period of 0.60 s. What average emf is induced in the second coil if it has a diameter of 3.3 cm and N=7? Express your answer in microvolts. Part B What is the induced emt if the diameter is 6.6 cm and N=14 ? Express your answer in microvolts
Part A. Answer: 7.65 μV.
Part B. Answer: 2.11 μV.
Part A The average emf induced in the second coil if it has a diameter of 3.3 cm and N=7 is calculated as follows:Formula used:EMF = -N(ΔΦ/Δt)Given:Radius of solenoid, r1 = 3/2 × 10-2 cmRadius of second coil, r2 = 3.3/2 × 10-2 cmNumber of turns on second coil, N = 7Number of turns on solenoid, n = 40 turns/cmCurrent in the solenoid, I = 0.245 ATime period to ramp down the current, t = 0.60 sFirst we need to find the magnetic field B1 due to the solenoid.
The formula for magnetic field due to solenoid is given as:B1 = μ0nIWhere μ0 is the permeability of free space and is equal to 4π × 10-7 T m/A.On substituting the values, we get:B1 = (4π × 10-7) × 40 × 0.245B1 = 1.96 × 10-5 TWe can also write the above value of B1 as:B1 = μ0nIWhere the number of turns per unit length (n) is given as 40 turns/cm.The formula for the magnetic field B2 due to the second coil is given as:B2 = μ0NI/2r2Where N is the number of turns on the second coil, and r2 is the radius of the second coil.
The magnetic flux linked with the second coil is given as:Φ = B2πr2²The change in flux is calculated as:ΔΦ = Φ2 - Φ1Where Φ2 is the final flux and Φ1 is the initial flux.The final flux linked with the second coil Φ2 is given as:B2 = μ0NI/2r2Φ2 = B2πr2²Substituting the given values in the above equation we get:Φ2 = (4π × 10-7) × 7 × 0.245 × (3.3/2 × 10-2)² × πΦ2 = 3.218 × 10-8 WbThe initial flux linked with the second coil Φ1 is given as:B1 = μ0nIΦ1 = B1πr2²Substituting the given values in the above equation we get:Φ1 = (4π × 10-7) × 40 × 0.245 × (3.3/2 × 10-2)² × πΦ1 = 4.077 × 10-8 WbNow, we can calculate the average emf induced in the second coil using the formula mentioned above:EMF = -N(ΔΦ/Δt)EMF = -7((3.218 × 10-8 - 4.077 × 10-8)/(0.60))EMF = 7.65 μVAnswer: 7.65 μV.
Part BWhat is the induced emf if the diameter is 6.6 cm and N=14?The radius of the second coil is given as r2 = 6.6/2 × 10-2 cm.The number of turns on the second coil is given as N = 14.The magnetic flux linked with the second coil is given as:Φ = B2πr2²The change in flux is calculated as:ΔΦ = Φ2 - Φ1Where Φ2 is the final flux and Φ1 is the initial flux.The final flux linked with the second coil Φ2 is given as:B2 = μ0NI/2r2Φ2 = B2πr2².
Substituting the given values in the above equation we get:Φ2 = (4π × 10-7) × 14 × 0.245 × (6.6/2 × 10-2)² × πΦ2 = 2.939 × 10-7 WbThe initial flux linked with the second coil Φ1 is given as:B1 = μ0nIΦ1 = B1πr2²Substituting the given values in the above equation we get:Φ1 = (4π × 10-7) × 40 × 0.245 × (6.6/2 × 10-2)² × πΦ1 = 3.707 × 10-7 WbNow, we can calculate the average emf induced in the second coil using the formula mentioned above:EMF = -N(ΔΦ/Δt)EMF = -14((2.939 × 10-7 - 3.707 × 10-7)/(0.60))EMF = 2.11 μVAnswer: 2.11 μV.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
An object with mass 0.360-kg, attached to a spring with spring constant k = 10.0 N/m, is moving on a horizontal frictionless surface in simple harmonic motion of amplitude A = 0.0820 m. What is the kinetic energy of the object at the instant when its displacement is x = 0.0410 m? a. 0.042 J
b. 2.46 J
c. 0.025 J
d. 9.86 J
e. 0.013 J
The kinetic energy of the object at the instant when its displacement is x = 0.0410 m is 0.024 J. The option (c) 0.025 J is the closest.
spring constant k = 10.0 N/m,
amplitude A = 0.0820 m.
We are to find the kinetic energy of the object at the instant when its displacement is x = 0.0410 m.
The kinetic energy (KE) of the object can be given as the difference between its potential energy (PE) and its total mechanical energy (E).
The potential energy stored in the spring when it is stretched or compressed is given as;
PE = 1/2 kx²
Where
k = spring constant
x = displacement
Substitute the given values;
PE = 1/2(10.0 N/m)(0.0410 m)² = 0.00846 J
Total mechanical energy (E) is given as:
E = 1/2 kA²
Where
A = amplitude of motion
Substitute the given values;
E = 1/2(10.0 N/m)(0.0820 m)² = 0.033 Joules
Kinetic energy (KE) is given as:
KE = E - PE= 0.033 J - 0.00846 J= 0.024 J
Therefore, the kinetic energy of the object at the instant when its displacement is
x = 0.0410 m is 0.024 J.
The option (c) 0.025 J is the closest.
Learn more about spring constant:
https://brainly.com/question/14670501
#SPJ11
Maxwell's Equation
A circular-plates capacitor of radius R = 22.0 cm is connected to a source of
emf E= Emsinωt, where Em = 237V and ω = 180rad/s. The maximum value
of the displacement current is id = 4.5μA.
(a) Find the maximum value of the current i in the circuit.
(b) Find the maximum value of dφE /dt, where φE is the electric flux through the
region between the plates.
(c) Find the separation d between the plates.
(d) Find the maximum value of the magnitude of ~B between the plates at a distance
r = 10.7 cm from the center.
A circular-plates capacitor with a radius of 22.0 cm is connected to a sinusoidal voltage source E = Emsin(ωt). The maximum current i is 4.5 μA. he maximum value of dφ [tex]\frac{E}{dt}[/tex] is 237 V * ω. Magnitude can be obtained using ampere's law.
(a) The maximum value of the current, i, can be determined by equating the displacement current, id, to the rate of change of electric flux, dφ [tex]\frac{E}{dt}[/tex], in the circuit. Since id is given as 4.5 μA, the maximum value of i is also 4.5 μA.
(b) The maximum value of dφ [tex]\frac{E}{dt}[/tex] can be calculated by taking the time derivative of the given emf expression E = Em sin(ωt). The derivative of sin(ωt) is ω cos(ωt). Multiplying this by the maximum value of Em (237 V), we get the maximum value of dφ [tex]\frac{E}{dt}[/tex] as 237 V * ω.
(c) The separation between the plates, d, can be found by rearranging the equation for capacitance, C = ε0 * [tex]\frac{A}{d}[/tex], where ε0 is the permittivity of free space and A is the area of the circular plates (π[tex]R^2[/tex]). Substituting the given values of R (22.0 cm) and the known value of C (from the problem), we can solve for d. d = ε0 * (π * R^2) / C.
(d) To find the maximum value of the magnitude of ~B at a distance r = 10.7 cm from the center, we can use Ampere's law in integral form, ∮ B · dl = μ0 * I_enc, where I_enc is the enclosed current. For a circular plate capacitor, the enclosed current is equal to the displacement current, id. By substituting the given value of id and the known values of μ0 and the circumference of the circular path (2πr), we can calculate the maximum value of ~B. Substituting these values into Ampere's law, we have:
B * (2πr) = μ0 * id
We can rearrange this equation to solve for B:
B = (μ0 * id) / (2πr)
Learn more about Ampere's law here:
https://brainly.com/question/32676356
#SPJ11
A force that varies with time F- 19t3 acts on a sled (to the right, in the positive direction) of mass 60 kg from t₁ = 14 seconds to t₂ -3.5 seconds. If the sled was initially moving TO THE LEFT (in the negative direction) at an initial speed of 29 m/s, determine the final velocity of the sled. Record your answer with at least three significant figures. IF your answer is negative (to the left), be sure to include a negative sign with your answer!
Answer:
The final velocity of the sled is approximately -1688.3 m/s in the negative direction.
Mass of the sled (m) = 60 kg
Force acting on the sled (F) = 19t^3 N,
where t is the time in seconds.
Initial velocity of the sled (v_initial) = -29 m/s
To find the final velocity, we'll integrate the force function over the given time interval and apply the initial condition.
The integral of 19t^3 with respect to t is (19/4)t^4.
Let's denote it as F_integrated.
F_integrated = (19/4)t^4
Now, let's calculate the change in momentum:
Δp = F_integrated(t₂) - F_integrated(t₁)
Substituting the time values:
Δp = (19/4)(t₂^4) - (19/4)(t₁^4)
Δp = (19/4)(-3.5^4) - (19/4)(14^4)
Δp = (19/4)(-150.0625) - (19/4)(38416)
Δp = -7129.8125 - 92428
Δp ≈ -99557.8125 kg·m/s
Using the definition of momentum (p = mv), we can relate the change in momentum to the final velocity:
Δp = m(v_final - v_initial)
-99557.8125 = 60(v_final - (-29))
Simplifying:
-99557.8125 = 60(v_final + 29)
Dividing both sides by 60:
-1659.296875 = v_final + 29
Subtracting 29 from both sides:
v_final = -1688.296875 m/s
Therefore, the final velocity of the sled is approximately -1688.3 m/s in the negative direction.
Learn more about velocity here
https://brainly.com/question/80295
#SPJ11
A hydraulic jack has an input piston of area 0.050 m2 and ☆ an output piston of area 0.70 m2. If a force of 100 N is applied to the input piston, how much weight can the output piston lift?
The hydraulic jack utilizes the principle of Pascal's law to amplify force. The output piston can lift a weight of 1400 N when a force of 100 N is applied to the input piston, considering the given areas of the pistons.
Pascal's law states that the pressure exerted at any point in a confined fluid is transmitted equally in all directions. In the case of a hydraulic jack, this means that the pressure applied to the input piston will be transmitted to the output piston.
The pressure exerted on the fluid can be calculated by dividing the force applied by the area of the piston. In this case, the input piston has an area of 0.050 m^2, Calculate the pressure on the input piston:
Pressure = Force / Area
Pressure = 100 N / 0.050 m^2
Pressure = 2000 Pa (Pascals)
so the pressure exerted on the fluid is 100 N divided by 0.050 m^2, which is 2000 Pa (Pascal).
Since the pressure is transmitted equally, the same pressure will be exerted on the output piston. The output piston has an area of 0.70 m^2. Therefore, the force that can be generated on the output piston can be calculated by multiplying the pressure by the area of the piston. Calculate the force exerted by the output piston:
Force = Pressure × Area
Force = 2000 Pa × 0.70 m^2
Force = 1400 N In this case, the force is 2000 Pa multiplied by 0.70 m^2, which is 1400 N
Learn more about Pascal's law here:
https://brainly.com/question/1414149
#SPJ11
A fluid of viscosity 0.15 Pa.s and density 1100 kg/m³ is transported vertically in a feed pipe of internal diameter (ID = 0.15 m). A spherical thermal sensor, 0.001 m in diameter was installed into the pipe. The velocity at the tip of the sensor inside the pipe is required for calibration of the sensor. It is not possible to accurately measure the velocity of the fluid at the location of the tip of the sensor, and unfortunately due to poor workmanship, the sensor was not installed perpendicularly to the pipe wall and the sensor tip is not positioned at the centre of the pipe. Workmen have conducted the following measurements shown below when the pipe was empty.
In order to calibrate the thermal sensor installed in the vertical feed pipe, the velocity at the tip of the sensor needs to be determined. However, accurate measurement of the fluid velocity at that location is not possible, and the sensor was also not installed perpendicular to the pipe wall, with its tip not positioned at the center of the pipe. The workmen conducted measurements when the pipe was empty, and these measurements will be used to estimate the velocity at the sensor's tip.
To estimate the velocity at the tip of the thermal sensor, we can make use of the principle of continuity, which states that the mass flow rate of an incompressible fluid remains constant along a streamline. Since the pipe is empty, the mass flow rate is zero. However, we can assume that the continuity equation still holds, and by considering the cross-sectional areas of the pipe and the sensor, we can estimate the velocity at the tip.
First, we need to determine the cross-sectional area of the sensor. Since it is a sphere, the cross-sectional area is given by A = πr^2, where r is the radius of the sensor (0.001 m/2 = 0.0005 m).
Next, we can use the principle of continuity to relate the velocity at the pipe's cross-section (empty) to the velocity at the sensor's cross-section. According to the principle of continuity, A_pipe * V_pipe = A_sensor * V_sensor.
Since the pipe is empty, the velocity at the pipe's cross-section is zero. Plugging in the values, we have 0 * V_pipe = π(0.0005^2) * V_sensor.
Simplifying the equation, we can solve for V_sensor, which will give us the estimated velocity at the tip of the sensor inside the pipe.
To know more about thermal sensors click here:
https://brainly.com/question/30773914
#SPJ11
Answer Both Parts Or Do Not Answer
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the:
Child
Parents
Cannot answer with the information given.
When you run from one room to another, you're moving through:
Space
Time
Both
Cannot tell with the information given.
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the: Parents.
When you run from one room to another, you're moving through:Space.
Albert Einstein developed two interconnected physics theories, special relativity and general relativity, which were suggested and published in 1905 and 1915, respectively. These two ideas are commonly referred to as the theory of relativity. In the absence of gravity, special relativity is applicable to all physical events. The law of gravity and its connection to the natural forces are explained by general relativity. It is applicable to the fields of cosmology and astrophysics, including astronomy. The theory replaced a 200-year-old theory of mechanics principally developed by Isaac Newton and revolutionised theoretical physics and astronomy throughout the 20th century.
To know more about relativity theory
https://brainly.com/question/364776
#SPJ11
A Zehrs truck loaded with cannonball watermelons stops suddenly to avoid running over the edge of a washed out bridge. The quick stop causes a number of melons to fly off of the truck. One melon rolls over the edge of the road with an initial velocity of 10 m/s in the horizontal direction. The river valley has a parabolic cross-section matching the equation y 2
=16x where x and y are measured in metres with the vertex at the road edge. What are the x and y components of where the watermelon smashes onto the river valley?
x = 4.0816 m and y = 10.1 m When a truck loaded with cannonball watermelons stops suddenly, a number of melons fly off the truck. One melon rolls over the edge of the road with an initial velocity of 10 m/s in the horizontal direction.
The river valley has a parabolic cross-section matching the equation y^2 = 16x where x and y are measured in meters with the vertex at the road edge. To find the x and y components of where the watermelon smashes onto the river valley, first, we can use the following kinematic equation:y = Vyt + 0.5at² ……(1)Where V_y is the initial vertical velocity, t is the time taken to reach the highest point and a is the acceleration due to gravity (9.8 m/s²).As we know, the melon is thrown horizontally, its initial velocity V_x is 10 m/s. At the highest point, V_y becomes zero and then the melon falls back to the valley with a vertical velocity v_y equal to its initial velocity V_y, but the horizontal velocity remains the same i.e. V_x. Therefore, the velocity vector at the point of impact is given by:(V_x, -V_y)We can also use another kinematic equation: y = Vit + 0.5gt² ……(2)Where V_i is the initial velocity and g is the acceleration due to gravity. Substituting the given values, we get:10t = 4x ……(3)t = 0.4x, Substituting (3) in (1), we get:y = V_y (0.4x) + 0.5 (9.8) (0.4x)²y = 0.4 V_y x + 1.568 x²Putting V_y = 0, as there is no initial vertical velocity, we get:y = 1.568 x²Substituting V_x = 10 m/s in (3), we get:x = 0.4t = 0.4 (10/9.8) = 0.40816 s, Therefore, x = 4.0816 m and y = 10.1 m.
To know more about direction visit:
https://brainly.com/question/29132707
#SPJ11
Cobalt (Z = 27) has seven electrons in an incomplete d subshell.
(a) What are the values of n and ℓ for each electron?
n =
. ℓ =
(b) What are all possible values of mscripted ms and ms? mscripted ms = − _____ to + ____
ms = ± ______
c) What is the electron configuration in the ground state of cobalt? (Use the first space for entering the shorthand element of the filled inner shells, then use the remaining for the outer-shell electrons. Ex: for Manganese you would enter [Ar]3d54s2)
[ ] d s
Electron 1: n = 3, ℓ = 2 Electron 2: n = 3, ℓ = 2 Electron 3: n = 3, ℓ = 2
ms = -1, 0, +1 ms = ±1/2
The electron configuration of Cobalt is [Ar] 4s² 3d¹º.
a) The values of n and l for each electron are:
The number of subshells in a shell is equal to n.
The possible values of ℓ are from 0 to n − 1.
The d subshell has ℓ = 2.
We can use the fact that there are seven electrons to determine how they are distributed.Each d orbital can hold two electrons, and there are five d orbitals. As a result, there are three unpaired electrons. These unpaired electrons must be in separate orbitals, thus we should use the three empty d orbitals.
According to the Aufbau principle, the first electron goes into the lowest energy orbital, which is 3dxy, followed by 3dxz and 3dyz. As a result, the values of n and l for each electron are:
Electron 1: n = 3, ℓ = 2
Electron 2: n = 3, ℓ = 2
Electron 3: n = 3, ℓ = 2
b) The possible values of mscripted ms and ms are:
Each orbital can hold up to two electrons, which are designated as spin up (+½) and spin down (-½). As a result, there are two potential values of mscripted ms (+½ or -½) and two potential values of ms (+1/2 or -1/2). The three unpaired electrons must have three different values of mscripted ms, which is a whole number between -ℓ and ℓ, and can take on three possible values: +1, 0, and -1. There is only one orbital per mscripted ms value, thus we can use those values to identify which unpaired electron goes in which orbital.
mscripted ms = -1, 0, +1 ms = ±1/2 (the electrons in each orbital will have the same value of ms)
c) The electron configuration in the ground state of cobalt is:
To construct the electron configuration of Cobalt (Z = 27), we should write out the configuration of Argon (Z = 18), which is the nearest noble gas that represents the complete filling of the first and second energy levels. Following that, we can add the remaining electrons to the 3rd energy level. Since Cobalt (Z = 27) has 27 electrons, the configuration will have 27 electrons.
We can write the configuration as:
[Ar] 4s² 3d¹º (the number 10 denotes seven electrons in the incomplete d subshell)
Therefore, the electron configuration of Cobalt is [Ar] 4s² 3d¹º.
Learn more about electron configuration:
https://brainly.com/question/26084288
#SPJ11
A 0.26-kg rock is thrown vertically upward from the top of a cliff that is 32 m high. When it hits the ground at the base of the cliff, the rock has a speed of 29 m>s. Assuming that air resistance can be ignored, find (a) the initial speed of the rock and (b) the greatest height of the rock as measured from the base of the cliff.
The initial speed of the rock is 14.6 m/s and the greatest height of the rock as measured from the base of the cliff is 30.08 m.
Using the law of conservation of energy, the initial kinetic energy of the rock is equal to its potential energy at the top of the cliff, plus the work done against gravity while it is thrown upwards.
Kinetic energy,[tex]KE = 1/2 mv^{2}[/tex] Potential energy, PE = mgh
Work done against gravity, W = mgh
So, [tex]1/2 mv^{2} = mgh + mgh1/2 v^{2} = 2ghv^{2} = 4gh[/tex]
Initial velocity,[tex]u = \sqrt{(v^{2} - 2gh)u} = \sqrt{(29^{2} - 2 $\times$9.8 $\times$ 32)u} = \sqrt{(841 - 627.2)u } = \sqrt{213.8u } = 14.6 m/s[/tex]
Therefore, the initial speed of the rock is 14.6 m/s.
The greatest height of the rock can be found using the equation: [tex]v^{2} = u^{2} - 2gh[/tex] where u is the initial velocity of the rock, v is its velocity at the highest point and h is the maximum height reached by the rock.
At the highest point, v = 0.
So, [tex]0^{2} = (14.6)^{2} - 2gh, h = (14.6)^{2} / 2g h = 30.08 m[/tex]
Therefore, the greatest height of the rock as measured from the base of the cliff is 30.08 m.
For more questions on initial speed
https://brainly.com/question/24493758
#SPJ8
What is the smallest thickness of a soap bubble (n=1.33) capable of producing reflective constructive 568nm light ray?
The smallest thickness of a soap bubble capable of producing reflective constructive interference for a 568 nm light ray is approximately 213.53 nanometers.
To determine the smallest thickness of a soap bubble that can produce reflective constructive interference for a specific wavelength of light, we can use the equation for constructive interference in a thin film:
2t = mλ/n
where:
t is the thickness of the soap bubble
m is the order of the interference (in this case, m = 1 for first-order)
λ is the wavelength of the light
n is the refractive index of the medium (in this case, the refractive index of the soap bubble, n = 1.33)
Rearranging the equation, we get:
t = (mλ)/(2n)
Plugging in the values, we have:
t = (1 x 568 nm) / (2 x 1.33)
Calculating this, we find:
t ≈ 213.53 nm
Therefore, the smallest thickness of a soap bubble capable of producing reflective constructive interference for a 568 nm light ray is approximately 213.53 nanometers.
Learn more about constructive interference
https://brainly.com/question/32710335
#SPJ11
A long nonconducting cylinder (radius =10 cm) has a charge of uniform density (6.0nC/m 3
) distributed throughout its column. Determine the magnitude of the electric field 2.5 cm from the axis of the cylinder.
To determine the magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder. The magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder is approximately 135,453 N/C.
Radius of the cylinder (r) = 10 cm = 0.1 m Charge density (ρ) = 6.0 nC/m³ Distance from the axis (d) = 2.5 cm = 0.025 m To calculate the electric field, we can use the formula: Electric field (E) = (ρ * r) / (2 * ε₀ * d) Where ε₀ is the permittivity of free space.
Substituting the given values and the constant value of ε₀ (8.854 x 10^-12 C²/(N·m²)) into the formula, we can calculate the magnitude of the electric field. Electric field (E) = (6.0 nC/m³ * 0.1 m) / (2 * 8.854 x 10^-12 C²/(N·m²) * 0.025 m) Calculating the expression: Electric field (E) ≈ 135,453 N/C
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A 87.0 kg person is riding in a car moving at 24.0 m/s when the car runs into a bridge abutment. Calculate the average force on the person if he is stopped by a padded dashboard that compresses an average of 1.00 cm. Calculate the average force on the person if he is stopped by an air bag that compresses an average of 15.0 cm.
The average force exerted on the person if he is stopped by a padded dashboard that compresses an average of 1.00 cm is 5.54 * 10³ N, and the average force exerted on the person if he is stopped by an airbag that compresses an average of 15.0 cm is 2.60 * 10⁴ N.
The impact of a vehicle during an accident can result in serious injury or even death. Therefore, it is necessary to calculate the force exerted on a passenger during an accident. Here are the calculations to determine the average force on the person if he is stopped by a padded dashboard that compresses an average of 1.00 cm and an airbag that compresses an average of 15.0 cm.
Mass of the person, m = 87.0 kg
Velocity of the car, v = 24.0 m/s
Compression distance by the padded dashboard, d1 = 1.00 cm
Compression distance by the airbag, d2 = 15.0 cm
The momentum of a body is given as:
P = m * v
The above equation represents the initial momentum of the passenger in the car before the collision. Now, after the collision, the passenger comes to rest, and the entire momentum of the passenger is absorbed by the padded dashboard and the airbag. Therefore, the force exerted on the passenger during the collision is:
F = Δp / Δt
Here, Δt is the time taken by the dashboard and the airbag to come to rest. Therefore, it is assumed that the time is the same for both cases. Therefore, we can calculate the average force exerted on the person by the dashboard and the airbag as follows:
Average force exerted by the dashboard,
F1 = Δp / Δt1 = m * v / t1
The distance over which the dashboard is compressed is d1 = 1.00 cm = 0.01 m. Therefore, the time taken by the dashboard to come to rest is:
t1 = √(2 * d1 / a)
Here, a is the acceleration of the dashboard, which is given as a = F1 / m.The above equation can be written as:F1 = m * a = m * (√(2 * d1 / t1²))
Therefore, the average force exerted by the dashboard can be calculated as:
F1 = m * (√(2 * d1 * a)) / t1 = 5.54 * 10³ N
Average force exerted by the airbag,
F2 = Δp / Δt2 = m * v / t2
The distance over which the airbag is compressed is d2 = 15.0 cm = 0.15 m. Therefore, the time taken by the airbag to come to rest is:t2 = √(2 * d2 / a)
Here, a is the acceleration of the airbag, which is given as a = F2 / m.
The above equation can be written as:
F2 = m * a = m * (√(2 * d2 / t2²))
Therefore, the average force exerted by the airbag can be calculated as:
F2 = m * (√(2 * d2 * a)) / t2 = 2.60 * 10⁴ N
Therefore, the average force exerted on the person if he is stopped by a padded dashboard that compresses an average of 1.00 cm is 5.54 * 10³ N, and the average force exerted on the person if he is stopped by an airbag that compresses an average of 15.0 cm is 2.60 * 10⁴ N.
Learn more about force at: https://brainly.com/question/12785175
#SPJ11
Charge flow in a lightbulb A 100 W lightbulb carries a current of 0.83 A. How much charge result is still somewhat surprising. That's a fot of chargel The flows through the bulb in 1 minute? enormous charge that flows through the bulb is a good check STAATEOIE Equation 22.2 gives the charge in terms of the cur- on the concept of conservation of current. If even a minuseule rent and the time interval. fraction of the charge stayed in the bulb, the bulb would become sotve According to Equation 22.2, the total charge passing highly charged. For comparison, a Van de Graff generation through the bulb in 1 min=60 s is through the bulb in I min=60 s is q=lΔt=(0.83 A)(60 s)=50C
noticeable charge, so the current into and out of the bulb mast be
excess charge of just a few μC, a ten-millionth of the charge that flows through the bulb in 1 minute. Lightbulbs do not develop a
Assess The current corresponds to a flow of a bit less than noticeable charge, so the current into and out of the bulb must be I C per second, so our calculation seems reasonable, bet the
The charge that flows through a 100 W lightbulb in 1 minute is approximately 50 C. This value is consistent with the concept of conservation of charge and the relationship between current and charge flow.
The charge passing through a conductor can be calculated using Equation 22.2, which relates charge (q) to current (I) and time (Δt). In this case, the current is given as 0.83 A and the time interval is 60 seconds (1 minute). Using the equation q = I * Δt, we find that the total charge passing through the lightbulb in 1 minute is q = (0.83 A) * (60 s) = 50 C.
It is worth noting that although 50 C may seem like a large amount of charge, it is actually a relatively small fraction of the total charge that flows through the bulb. If even a tiny fraction of the charge stayed in the bulb, the bulb would become highly charged, which is not observed in practice. This observation is consistent with the concept of conservation of charge, where the total charge entering a circuit must equal the total charge exiting the circuit.
Learn more about conductor here:
https://brainly.com/question/14405035
#SPJ11
Use your result above to calculate the incident angle θ 1
from air in entering the fiber (see notes on refraction). Use three significant digits please.
To calculate the incident angle θ1, we need additional information related to refraction, such as the refractive indices of the materials involved.
In the context of refraction, the incident angle (θ1) is the angle between the incident ray and the normal to the interface between two media. To calculate θ1, we need to know the refractive indices of the materials involved. The refractive index (n) is a property of a medium that determines how light propagates through it. The relationship between the incident angle, the refractive indices of the two media, and the angles of refraction can be described by Snell's law.
To determine the incident angle accurately, the refractive indices of both the air and the fiber are required. Once these values are known, Snell's law can be applied to calculate the incident angle.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ11
What is the internal resistance of an automobile battery that has an emf of 12.0 V and a terminal voltage of 18.2 V while a current of 4.20 A is charging it? Ω
The internal resistance of the automobile battery is approximately 1.476 Ω.
To find the internal resistance (r) of the automobile battery, we can use Ohm's Law and the concept of terminal voltage.
Ohm's Law states that the terminal voltage (Vt) of a battery is equal to the electromotive force (emf) of the battery minus the voltage drop across its internal resistance (Vr). Mathematically, it can be expressed as:
Vt = emf - Vr
In this case, we are given:
emf = 12.0 V
Vt = 18.2 V
I = 4.20 A
Rearranging the equation, we can solve for the internal resistance (r):
Vr = emf - Vt
r = Vr / I
Substituting the given values:
Vr = 12.0 V - 18.2 V = -6.2 V (Note: the negative sign indicates a voltage drop)
I = 4.20 A
Calculating the internal resistance:
r = (-6.2 V) / 4.20 A
r ≈ -1.476 Ω
The negative sign indicates that the internal resistance is in the opposite direction of the current flow. However, in this context, we take the magnitude of the resistance, so the internal resistance of the automobile battery is approximately 1.476 Ω.
Learn more about Ohm's Law
https://brainly.com/question/1247379
#SPJ11
A particle of mass m is situated somewhere in between planets X and Y. The particle's location is at a distance d from planet X and at a distance 1.5d from planet Y. If planet X has a mass of M, and planet Y has a mass of 3M, then which planet exerts greater gravitational force on the particle? By how much, in percent?
Planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
To find out which planet exerts greater gravitational force on the particle and the percent difference, use the formula for gravitational force:
F = G(m1m2/d^2)
where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and d is the distance between them.
Mass of the particle = m
Distance of the particle from planet X = d
Distance of the particle from planet Y = 1.5d
Mass of planet X = M
Mass of planet Y = 3M
Calculate the gravitational force on the particle due to planet X:
Fx = G(Mm/d^2)
Calculate the gravitational force on the particle due to planet Y:
Fy = G(3Mm/2.25d^2)
Simplifying:
Fy = (4/3)G(Mm/d^2)
The gravitational force on the particle due to planet Y is (4/3) times the gravitational force on the particle due to planet X. This means that planet Y exerts a greater gravitational force on the particle than planet X, by a factor of (4/3) - 1 = 1/3. Converting this to a percentage, we get:
Percentage difference = (1/3) * 100% = 33.33%
Therefore, planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
Learn more about gravitational force: https://brainly.com/question/24783651
#SPJ11