When a molecule is exposed to infrared radiation, the molecular change is c. a vibrational excitation.
Infrared radiation is a type of electromagnetic radiation that has a wavelength longer than visible light but shorter than microwaves. It is also known as heat radiation since it produces heat upon exposure to matter. Infrared radiation is used in various fields such as astronomy, meteorology, physics, and chemistry. It can detect celestial objects, measure temperature and atmospheric conditions, and identify molecular structures in chemistry.
Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule. The energy from the IR radiation is absorbed by the molecule's vibrational motion, leading to a change in the molecule's vibrational state.The absorbed energy causes the bonds in the molecule to stretch, contract, or bend. This energy can break the bonds, rearrange the atoms, or create new bonds, which leads to chemical changes in the molecule. Vibrational excitation is a common way to study molecular structure and function.
Summary, when a molecule is exposed to infrared radiation, it undergoes a vibrational excitation. Infrared radiation is a type of electromagnetic radiation that has a longer wavelength than visible light but shorter than microwaves. Molecules absorb infrared radiation when the frequency of the radiation matches the natural vibration frequency of the molecule.
Learn more about electromagnetic at:
https://brainly.com/question/29318543
#SPJ11
which electronegativities do you subtract to find out if a bond is polar or not in a 3 element compoudn
Answer: To find out if a bond is polar or not in a 3 element compound, you subtract the electronegativities of the two atoms forming the bond.
The difference in electronegativity values will help determine the polarity of the bond. If the difference is large enough, the bond will be polar, and if the difference is small or non-existent, the bond will be nonpolar.
What is electronegativity?
Electronegativity is a measure of the tendency of an atom to attract a bonding pair of electrons. It is the property of an atom that shows how strongly it pulls electrons towards itself. When atoms bond with each other, the electrons involved in bonding are not always shared equally.
What is a polar bond?
A polar bond is a covalent bond between two atoms where the electrons forming the bond are unequally shared. This results in a slight positive charge on one end of the molecule and a slight negative charge on the other end. In other words, one end of the molecule is more electronegative than the other.
What is a nonpolar bond?
A nonpolar bond is a covalent bond between two atoms where the electrons forming the bond are shared equally. This results in no separation of charge across the molecule.
What are the rules for identifying polar or nonpolar bonds in 3 element compounds?
To identify whether a bond is polar or nonpolar, subtract the electronegativities of the two atoms forming the bond. If the difference is less than 0.5, then the bond is nonpolar. If the difference is between 0.5 and 1.7, then the bond is polar. If the difference is greater than 1.7, then the bond is considered ionic.
Learn more about polar bond here:
https://brainly.com/question/10777799#
#SPJ11
when millerite, an ore containing solid nis , is roasted in the presence of oxygen, sulfur dioxide gas and a solid oxide of nickel are produced. in the reaction, nickel does not change oxidation state.enter the balanced chemical equation for the metallurgical reaction. include physical states.
The balanced chemical equation for the metallurgical reaction when millerite, an ore containing solid NiS, is roasted in the presence of oxygen can be given as;
2NiS(s) + 3O2(g) → 2NiO(s) + 2SO2(g)
The physical states in this equation are: NiS (s), O2 (g), NiO (s), and SO2 (g).
Explanation:
Millerite is a nickel sulfide mineral that consists of nickel and sulfur. When millerite is roasted in the presence of oxygen, it forms nickel oxide (NiO) and sulfur dioxide (SO2).
The oxidation state of nickel doesn't change because it's only reacting with oxygen.
NiS(s) + O2(g) → NiO(s) + SO2(g)
The balanced chemical equation for the metallurgical reaction when millerite, an ore containing solid NiS, is roasted in the presence of oxygen can be given as;2NiS(s) + 3O2(g) → 2NiO(s) + 2SO2(g)
The physical states in this equation are
NiS (s), O2 (g), NiO (s), and SO2 (g).
To know more about the millerite https://brainly.com/question/29856128
#SPJ11
A gas sample at constant pressure and temperature filled with Helium gas had a volume of 221 mL and 4.00 moles. If the volume is increased to 500 ml what is the number of moles of Helium gas that could occupy the container? 0.11 K 9.05 kPa 0.11 kPa 9.05 mol
The number of moles of Helium gas that could occupy the container when the volume is increased to 500 mL is 9.05 mol.
What is the number of moles of the gas?We can use the combined gas law to solve this problem:
(P1 x V1) / (n1 x T1) = (P2 x V2) / (n2 xT2)
where;
P is pressure, V is volume, n is number of moles, and T is temperature.We know that the pressure and temperature are constant, so we can simplify the equation to:
V1/n1 = V2/n2
Solving for n2, we get:
n2 = (V2n1) / V1
Plugging in the values, we get:
n2 = (500 mL * 4.00 mol) / 221 mL
n2 = 9.05 mol
Learn more about number of moles here: https://brainly.com/question/13314627
#SPJ1
what chemistry grew out of an ancient study ?
FILL IN THE BLANK. the __ protects the molten weld pool, the filler rod, and the tungsten electrode as they cool to a temperature at which they will not oxidize rapidly.
The blank can be filled with the term "shielding gas."Shielding gas protects the molten weld pool, the filler rod, and the tungsten electrode as they cool to a temperature at which they will not oxidize rapidly.
What is a shielding gas? A shielding gas is a gas that is employed in gas welding processes to safeguard the weld area from contamination. Welding processes that use shielding gases are referred to as gas metal arc welding or gas tungsten arc welding, among other things. What is the purpose of shielding gas in welding? The primary goal of shielding gas in welding is to defend the molten weld pool, the filler rod, and the tungsten electrode from being contaminated. When the shielding gas is utilized, it forms a sort of barrier that protects the weld from the air and other contaminants. In essence, the shielding gas creates a shield for the welding process that protects the molten weld pool from getting contaminated. As a result, the use of shielding gas is critical in ensuring that the welding process results in high-quality welds.
Learn more about molten weld pool at brainly.com/question/30024003
#SPJ11
g which of the following substances is an integral portion of embalming fluid? a. methanal b. methadone c. ethanal d. ethanol
The substance that is an integral portion of embalming fluid is Methanal. Therefore, the correct answer is A.
Methanal, also known as formaldehyde, is a common organic substance that is used as a disinfectant, fumigant, and preservative. It's also employed in manufacturing for the creation of plastics, textiles, and other products. It's a colorless, strong-smelling gas that is highly flammable.
Embalming fluid is a liquid mixture that is used to disinfect, sanitize, and temporarily preserve human remains. It's usually made up of formaldehyde, a variety of other chemicals, and water. This liquid preserves the body by delaying decay and decomposing processes. The fluid is inserted into the body via a small incision or puncture in the skin. When it comes into touch with bodily tissues, it fixes them.
Learn more about formaldehyde at https://brainly.com/question/28366450
#SPJ11
is the term used to describe the loss of a hydrogen and a halogen from an alkyl halide. the product of the reaction is a(n) .multiple choice question.addition; alkyl halidedehydrohalogenation; alkaneaddition; alkenedehydrohalogenation; alkene
Dehydrohalogenation is the term used to describe the loss of a hydrogen and a halogen from an alkyl halide. The product of the reaction is an alkene.
The term used to describe the loss of a hydrogen and a halogen from an alkyl halide is dehydrohalogenation. The product of the reaction is an alkene. Dehydrohalogenation is a type of organic reaction in which a hydrogen halide (HX) is removed from an organic molecule, typically an alkyl halide, to produce an alkene.
Alkyl halides are a type of organic compound in which one or more halogen atoms, such as chlorine or bromine, are substituted for hydrogen atoms on an alkane chain. The general formula for an alkyl halide is RX, where R is an alkane chain and X is a halogen.The dehydrohalogenation of an alkyl halide produces an alkene and a hydrogen halide, such as HCl or HBr. The reaction is catalyzed by a strong base, such as sodium ethoxide or potassium tert-butoxide. The mechanism of the reaction involves the removal of a proton from the alkyl halide by the base, followed by the elimination of the halide ion to produce an alkene.
For more such questions on Dehydrohalogenation , Visit:
https://brainly.com/question/14787332
#SPJ11
the density of normal water (tghe hydrogens do not have neurons) at 20c is 0.9982 g/ml. calculate the density you would expect for heavy water by assuming the deuterium is the same size as normal hydrogen when it is poart of the water
The density of heavy water at 20°C is 1.107 g/mL.
At 20°C, the density of normal water is 0.9982 g/ml.
The density of heavy water, which is composed of two atoms of deuterium instead of hydrogen, we must consider the difference in size between hydrogen and deuterium atoms.
Although the atomic masses of hydrogen and deuterium are slightly different, the difference in size is more significant, with deuterium atoms being about twice the size of hydrogen atoms.
Thus, when deuterium atoms are part of the water, the overall density of the water is greater.
This can be quantified using the following equation:
Density (heavy water) = [2*mass of hydrogen + mass of deuterium] / [2*volume of hydrogen + volume of deuterium]
The density of heavy water at 20°C is 1.107 g/ml, which is about 11% higher than that of normal water.
This increase in density is due to the larger size of deuterium atoms when compared to hydrogen atoms.
In conclusion, the density of heavy water at 20°C can be calculated by accounting for the difference in size between hydrogen and deuterium atoms.
This yields a value of 1.107 g/ml, which is 11% higher than that of normal water.
to know more about density refer here:
https://brainly.com/question/29775886#
#SPJ11
The two main factors that determine the climate of a region are
Latitude, altitude, prevailing winds, ocean currents, and the amount of solar energy that reaches the Earth's surface all play a role in determining a region's temperature.
What are the two qualities that make up a climate region?Average temperature and precipitation are perhaps the aspects of a region's climate that people are most familiar with. Climates can also be identified by changes in day-to-day, day-to-night, and seasonal fluctuations. For instance, the annual temperature and precipitation in Beijing, China, and San Francisco, California, are comparable.
What are the top two things that influence the weather?Temperature, water (moisture), and light (solar radiation) are the three primary determinants of weather.
To know more about temperature visit:-
brainly.com/question/28984750
#SPJ9
What must happen for a binary ionic bond to form between the atoms of two elements?
A. Both elements must gain one or more electrons. B. Both elements must lose one or more electrons. C. One element must lose one or more electrons, while the other must gain one or more electrons. D. One element must lose one or more protons, while the other must gain one or more protons
Both elements must lose one or more electrons. In a binary ionic bond, one element donates one or more electrons to the other element, which accepts the electrons. So the correct option is B .
This results in one element becoming a cation (a positively charged ion) and the other element becoming an anion (a negatively charged ion). The attraction between the opposite charges holds the two ions together in a crystal lattice, forming an ionic bond.
For example, in the formation of sodium chloride (NaCl), sodium donates one electron to chlorine, which accepts the electron, forming Na+ and Cl- ions. The attraction between the Na+ and Cl- ions forms the ionic bond in NaCl.
Learn more about binary ionic
https://brainly.com/question/7960132
#SPJ4
how does the average kinetic energy (avg ke) of an ideal gas vary as the molar mass of the gas increases?
The average kinetic energy (avg ke) of an ideal gas varies inversely with the molar mass of the gas.
The formula for average kinetic energy is KE=3/2 kT, where k is the Boltzmann constant and T is the temperature in Kelvin.
According to this formula, the average kinetic energy of gas molecules is proportional to temperature.
What is the ideal gas law?The ideal gas law is a combination of Boyle's Law, Charles' Law, and Avogadro's Law, which are the three laws governing the behavior of ideal gases.
The ideal gas law can be expressed as PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature.
Learn more about Boyle's Law, Charles' Law, and Avogadro's Law here:
https://brainly.com/question/13821925#
#SPJ11
if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, what is the half-life when the initial concentration is 0.050 m?
The half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes,
which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
The half-life of a second-order reaction depends on the initial reactant concentration.
When the initial concentration of a reactant is higher, the half-life of the reaction will be shorter; when the initial concentration of a reactant is lower, the half-life of the reaction will be longer.
Therefore, if a second-order reaction has a half-life of 10.0 minutes when the initial reactant concentration is 0.250 m, the half-life when the initial concentration is 0.050 m would be longer than 10.0 minutes.
To determine the exact half-life of the reaction with the lower initial concentration, we can use the integrated rate law for a second-order reaction:
ln[A]t = -kt + ln[A]0
In this equation, A
is the initial concentration of the reactant; and k is the reaction rate constant.
The half-life of the reaction with an initial concentration of 0.050 m, we can rearrange the equation to solve for t, the time in which the reactant concentration decreases to half of the initial concentration:
t = -(1/k) ln[0.5A0]
The initial concentration of 0.050 m, solve for t to get the half-life of the reaction with the lower initial concentration:
t = -(1/k) ln[0.5(0.050)] = 16.9 minutes
Therefore, the half-life of the reaction with an initial concentration of 0.050 m is 16.9 minutes, which is longer than the half-life of 10.0 minutes when the initial concentration was 0.250 m.
to know more about half-life refer here:
https://brainly.com/question/24710827#
#SPJ11
you are given a sample of kool-aid with an unknown concentration and you measure the absorbance in the spectrophotometer. the absorbance reading is 1.5. approximately what is the concentration of the sample?
Answer: The absorbance reading in this case was 1.5, and using the Beer-Lambert law and the extinction coefficient of the light used in the spectrophotometer, the concentration of the sample was approximately 1.5.
The concentration of a sample of Kool-Aid can be determined by measuring its absorbance in a spectrophotometer. In this case, the absorbance reading was 1.5.
To calculate the concentration of the sample, we must first understand how absorbance is related to concentration. The Beer-Lambert law states that the absorbance of a sample is directly proportional to the concentration of the sample. This means that the higher the concentration, the higher the absorbance, and vice versa.
Therefore, to find the concentration of the sample given its absorbance reading of 1.5, we can use the following equation: Concentration = Absorbance/Extinction Coefficient.
The extinction coefficient is a constant,and can be determined from the wavelength of the light used in the spectrophotometer.
Once we have determined the extinction coefficient, we can calculate the concentration of the sample. Plugging in the absorbance and extinction coefficient into the equation gives us the concentration of the sample. In this case, approximately 1.5.
In summary, the concentration of a sample of Kool-Aid can be determined by measuring its absorbance in a spectrophotometer. The absorbance reading in this case was 1.5, and using the Beer-Lambert law and the extinction coefficient of the light used in the spectrophotometer, the concentration of the sample was approximately 1.5.
Learn more about the Beer-Lambert law here:
https://brainly.com/question/30404288#
#SPJ11
what occurs when aqueous silver nitrate, a g n o 3 , reacts with aqueous potassium sulfate, k 2 s o 4 ?
Answer: A white precipitate of silver sulfate (Ag2SO4) is formed.
Explanation:
When aqueous silver nitrate (AgNO3) reacts with aqueous potassium sulfate (K2SO4), a double displacement reaction occurs. The cations and anions of the two compounds switch places to form two new compounds, which are potassium nitrate (KNO3) and silver sulfate (Ag2SO4).
AgNO3 + K2SO4 → Ag2SO4 + 2KNO3
The insoluble product of this reaction is silver sulfate (Ag2SO4), which appears as a white precipitate. This reaction is commonly used to detect the presence of sulfate ions in solution, as the formation of the silver sulfate precipitate confirms the presence of sulfate ions.
if necessary to take off from a slushy runway, the freezing of landing gear mechanisms can be minimized by:
If necessary to take off from a slushy runway, the freezing of landing gear mechanisms can be minimized by reducing the likelihood of the landing gear systems freezing when taking off from a slippery runway.
Landing gear freezing can be reduced if you need to take off from a slick runway by delaying gear withdrawal until you reach cruising altitude. The slush will slow you down, but it will also reduce your traction and increase the likelihood that a wheel may slip if you apply the brakes. If you are concerned about achieving this as you depart, take a taxi back in. Many pilots remove their aircraft wheel pants during the winter.
A slick runway may increase the likelihood of the landing gear systems freezing, jeopardising the flight's safety. If there is a crosswind, the pilot should begin the takeoff roll with full aileron pressure into the wind. For control, the pilot should maintain this stance.
Learn more about landing gear systems at
https://brainly.com/question/18270863
#SPJ4
prior knowledge questions (do these before using the gizmo.) what important gas do we take in when we breathe?
Answer: The important gas that we inhale when we breathe is oxygen (O2).
It is necessary for the process of respiration. Respiration is a vital process that takes place in all living cells, including human cells. In this process, glucose (sugar) and oxygen are converted into energy (ATP), carbon dioxide (CO2), and water (H2O).
During the process of inhalation, the air enters the body through the mouth and nose. Afterward, it moves down the trachea and then into the lungs. Once inside the lungs, oxygen molecules pass through the thin walls of the capillaries and into the bloodstream, where it is transported to the rest of the body. Oxygen is essential for the proper functioning of the body.
It is used by the cells to produce energy, which is used to power various biological processes. Without oxygen, our cells would not be able to function, and we would die.
Learn more about oxygen here:
https://brainly.com/question/13905823#
#SPJ11
A mixture of 90. 0grams of ch4 and 10. Ograms of argon has a pressure of 250 torr under the condition of constant temperature and pressure the partial pressure of ch4 is
The partial pressure of CH₄ in the mixture is 239 torr.
We can use the mole fraction of methane (CH4) to calculate its partial pressure in the mixture. First, we need to convert the masses of each component into moles:
moles of CH₄ = 90.0 g / 16.04 g/mol = 5.61 mol
moles of Ar = 10.0 g / 39.95 g/mol = 0.250 mol
Next, we can calculate the total moles of gas in the mixture,
total moles = moles of CH₄ + moles of Ar = 5.61 mol + 0.250 mol = 5.86 mol
Now we can calculate the mole fraction of CH₄,
mole fraction of CH₄ = moles of CH₄ / total moles = 5.61 mol / 5.86 mol = 0.957
Finally, we can use the mole fraction and total pressure to calculate the partial pressure of CH₄,
partial pressure of CH₄ = mole fraction of CH₄ x total pressure = 0.957 x 250 torr = 239 torr
To know more about mixture, here
brainly.com/question/20853110
#SPJ4
is the green salt more or less soluble in hot than in cold water? how did you utilize this information during the experiment
The green salt is less soluble in hot water than in cold water. During the experiment, this information can be utilized to adjust the temperature of the water to control the solubility of the salt.
The quantity of a substance that can dissolve in a particular solvent is known as solubility. Solubility is dependent on the properties of the solvent, the solute, and the solution. Temperature, pressure, and, in the case of ionically conducting solvents, electric fields also play a role.
Solubility is expressed as the maximum amount of solute that may be dissolved in a particular quantity of solvent at a specific temperature to create a saturated solution. Solubility of green salt, Green salt, also known as copper(II) acetate, is a substance with a solubility of 1.6 g/100 mL in cold water and 1.8 g/100 mL in hot water.
This means that green salt is more soluble in hot water than in cold water, according to the values given in the question. During the experiment, this information on the solubility of green salt in hot and cold water could be utilized to control the solubility of the salt.
Adjusting the temperature of the water to make it colder would increase the solubility of green salt in it, while adjusting the temperature of the water to make it hotter would decrease the solubility of green salt in it.
To know more about solubility, refer here:
https://brainly.com/question/31043941#
#SPJ11
in which cases do the substance(s) on the left have a higher entropy than the substance(s) on the right? select all that apply.
The correct options are a and d. When the substance on the left has more molecules and/or is more complex than the substance on the right, it will have higher entropy.
The entropy of a system depends on the number of accessible microstates available for the system. Generally, the more complex and disordered a system is, the higher its entropy.
In other words, a substance with more molecules and more complexity will have a higher entropy than one with fewer molecules and less complexity. Thus, in the cases when the substance on the left has more molecules and/or is more complex than the substance on the right, it will have higher entropy.
For example, if one side of the equation has solid and the other has gas, the gas side will generally have a higher entropy since gases are composed of more particles and are more random and disordered than solids.
In addition, if the substance on the left is composed of molecules that can move more freely than the molecules on the right, it will also have a higher entropy. This could be due to the fact that the molecules on the left are larger, more complex, and can move more freely than those on the right.
Finally, if the substance on the left is composed of molecules that are more reactive and/or can form more bonds than those on the right, it will generally have a higher entropy due to the increased complexity of the molecules.
Therefore, the correct options for higher entropy are (a) and (d).
The complete question is,
"in which cases do the substance(s) on the left have higher entropy than the substance(s) on the right? select all that apply.
(a) left has more molecules than the right
(b) left is less complex than the right
(c) right is more complex than left
(d) right is less complex than the left"
To know more about entropy, refer here:
https://brainly.com/question/13146879#
#SPJ11
explain why, in a simple model, a bivalent material could be considered to be an insulator. also explain why this simple argument is not true.
In a simple model, a bivalent material could be considered to be an insulator because it contains a large number of electrons in its outermost shell that is tightly bound to the atomic nucleus.
These electrons are involved in covalent bonding with neighboring atoms, resulting in the formation of a lattice structure that does not allow the free flow of electrons through it. As a result, bivalent materials such as diamond, silicon, and germanium are poor conductors of electricity and can be considered insulators in this simple model.
However, this simple argument is not true because it does not take into account the concept of doping, which involves adding impurities to a pure semiconductor material to modify its electrical properties. By introducing impurities such as boron or phosphorus, the number of free electrons or "holes" in the semiconductor can be increased, resulting in a material that can conduct electricity.
This process is used extensively in the semiconductor industry to produce materials such as diodes, transistors, and integrated circuits. Therefore, while bivalent materials can be considered insulators in a simple model, their properties can be modified through the process of doping and can conduct electricity under certain conditions.
To learn more about atomic nucleus
https://brainly.com/question/12707544
#SPJ4
your water has a density of 1.00 g/ml. assume that water determine the volume of the solution. find the molarity of a solution if you have 0.5268 g of naf dissolved in 2.250
To calculate the molarity of a solution when you know the density of water and the mass of the solute, you must first calculate the moles of the solute using the equation Mass (g) = Moles x Molar Mass. Then, you can calculate the molarity of the solution using the equation Molarity = moles of solute/liters of solution. In this case, the molarity of the solution was 5.556 M.
To find the molarity of a solution, you must first calculate the moles of the solute. In this case, the solute is sodium fluoride (NaF). The density of water is 1.00 g/ml, so we can assume that the volume of the solution is 2.250 ml. We can use the equation, Mass (g) = Moles x Molar Mass, to calculate the moles of NaF in the solution. We know the mass of NaF is 0.5268 g, and the molar mass of NaF is 41.99 g/mol. Using the equation, we can solve for the moles of NaF: 0.5268 g = moles x 41.99 g/mol, so moles = 0.0125 mol. Now that we know the moles of NaF, we can calculate the molarity of the solution. Molarity is calculated using the equation, Molarity = moles of solute/liters of solution. We already know the moles of solute (0.0125 mol), and we know the liters of solution is 2.250 ml. We must convert ml to liters, so 2.250 ml = 0.00225 L. Using the equation, we can calculate the molarity of the solution: Molarity = 0.0125 mol / 0.00225 L, so Molarity = 5.556 M.
In summary, to calculate the molarity of a solution when you know the density of water and the mass of the solute, you must first calculate the moles of the solute using the equation Mass (g) = Moles x Molar Mass. Then, you can calculate the molarity of the solution using the equation Molarity = moles of solute/liters of solution. In this case, the molarity of the solution was 5.556 M.
For more such questions on molarity
https://brainly.com/question/23243759
#SPJ11
what is the purpose of hcl in the first step? group of answer choices to activate aniliine to deactivate aniline to disrupt the aromaticity of aniline to remove hydrogen from aniline to make aniline more nucleophilic
The purpose of HCl in the first step is to make aniline more nucleophilic. Option E is correct.
The purpose of HCl in the first step is to protonate the amino group of aniline, which makes it more reactive and therefore more nucleophilic. This protonation reaction also helps to activate aniline towards electrophilic substitution reactions, such as the nitration or acylation of aniline.
Nucleophilic refers to a species or atom that has a tendency to donate an electron pair to form a new covalent bond with an electron-deficient species, known as an electrophile. In other words, a nucleophile is an electron-rich species that is attracted to regions of positive charge or electron deficiency.
This type of reaction is known as nucleophilic substitution or addition reactions, and is an important class of chemical reactions in organic chemistry.
Hence, E. to make aniline more nucleophilic is the correct option.
To know more about Nucleophilic here
https://brainly.com/question/13135762
#SPJ4
--The given question is incomplete, the complete question is
"What is the purpose of HCl in the first step? group of answer choices A) to activate aniliine B) to deactivate aniline C) to disrupt the aromaticity of aniline D) to remove hydrogen from aniline E) to make aniline more nucleophilic."--
calculate the ka of a 0.010m acid solution which is 19% ionized group of answer choices 5.4 x 10-4 1.9 x 103 4.5 x 10-4 5.4 x 105 1.9 x 10-3 4.5 x 10-3
The Ka of a 0.010m acid solution which is 19% ionized is 4.5x10-4.
The Ka of an acid is the measure of its acidity and is calculated by dividing the concentration of its products by the concentration of its reactants.
To calculate the Ka of a 0.010m acid solution, we need to know the concentration of the products, which is 19% ionized.
To calculate the concentration of the products, we need to multiply the concentration of the acid (0.010M) by the percentage of ionization (19%). This gives us the concentration of the products as 0.0019M.
Now, we can calculate the Ka of the acid by dividing the concentration of the products (0.0019M) by the concentration of the reactants (0.010M). This gives us a Ka value of 4.5x10-4.
To know more about percentage of ionization click on below link:
https://brainly.com/question/30354044#
#SPJ11
2) why is it important to maintain the reaction temperature low and the addition of nitric acid-sulfuric acid mixture carried out slowly?
If a catalyst is used during the reaction of an ester, which of the following can happen?
The reaction will reach equilibrium faster.
The reaction will reach equilibrium slower.
The catalyst will increase the amount of ester produced during the reaction.
The catalyst will reduce the amount of ester produced during the reaction.
Answer:
The reaction will reach equilibrium faster.
Explanation:
just took this lesson
if 37.2 kj of energy is evolved when 100. g of glucose is fermented, what is the molar enthalpy of fermentation?
If 37.2 kJ of energy is evolved when 100g. So, the molar enthalpy of fermentation is 67 kJ/mol.
The molar enthalpy of fermentation can be calculated as follows:
From the equation, 1 mole of glucose yields 2 moles of ethanol and 2 moles of carbon dioxide. Thus, the balanced equation for this process is:
C₆H₁₂O₆ (aq) → 2C₂H₅OH(aq) + 2CO₂ (g)
From the given values, the mass of glucose that was fermented is 100 g. The molar mass of glucose is 180.16 g/mol. Thus, the number of moles of glucose can be calculated as follows:
moles of glucose = Mass of glucose / Molar mass of glucose
moles of glucose = 100 g / 180.16 g/mol
moles of glucose = 0.555 moles
The molar enthalpy of fermentation is defined as the amount of energy released per mole of fermented glucose. Thus, the molar enthalpy of fermentation can be calculated as follows:
Molar enthalpy = Energy released / moles of glucose
Molar enthalpy = 37.2 kJ / 0.555 mol
Molar enthalpy = 67 kJ/mol
Therefore, the molar enthalpy of fermentation is 67 kJ/mol.
Complete question:
The equation for the fermentation of glucose to ethanol and carbon dioxide is C6 H12 O6 (aq) 3,2CrN 5 OH(aq)+2CO 2 (g) If 37.2 kJ of energy is evolved when 100. g of glucose is fermented, what the molar enthalpy of fermentation?
Learn more about molar enthalpy at https://brainly.com/question/29295293
#SPJ11
if you wanted to go into the lab and emulate the buffer solution that exists in your blood which combination of compounds would you mix together to create your buffer? explain your choice.
A combination of sodium chloride and bicarbonate in a 1:1 ratio is the best choice for creating an approximate buffer solution that mimics the one found in the human bloodstream. This solution helps to maintain the ideal pH balance in the body and ensures optimal functioning.
The bicarbonate acts as a buffer by quickly neutralizing any acidity or alkalinity in the bloodstream, while the sodium chloride acts to further stabilize the pH levels. The buffer solution helps to maintain the optimal pH level of 7.4 in the bloodstream, and keeps the body functioning optimally.
It is important to note that the exact ratio of compounds in the buffer system will vary depending on the individual. For example, the ratio of NaCl to HCO3- may be slightly different from one person to the next. In addition, other compounds such as proteins, amino acids, and phosphates may also be present in small amounts.
Know more about buffer system here:
https://brainly.com/question/22821585
#SPJ11
calculate the number of water, x, of crystalization in an unknown sample, having a molar mass of 129.839 g/mol when unhydrated. (you need to find the ratio of moles of water to moles of dry sample)
The ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
The calculation of the number of water molecules in a crystal can be performed by analyzing the molar mass of the unhydrated crystal, which contains no water molecules. The ratio of moles of water to moles of dry sample can then be found by comparing the molar masses of the hydrated and unhydrated crystals.
The formula for calculating the number of water molecules in a crystal is as follows:
Percentage of water in crystal = (Molar mass of water / Molar mass of hydrate) * 100
The percentage of water in a crystal can then be used to determine the ratio of moles of water to moles of dry sample. To calculate the number of water molecules in an unknown sample, you must first determine the molar mass of the unhydrated sample. This can be done by dividing the mass of the sample by the number of moles in the sample. The mass of the sample is the sum of the masses of the dry sample and the water molecules. The molar mass of the water molecules is 18.015 g/mol.
To determine the mass of the water molecules, you must subtract the mass of the dry sample from the mass of the sample. The molar mass of the unhydrated sample can then be determined by dividing the mass of the dry sample by the number of moles in the sample. Once the molar mass of the unhydrated sample is known, the percentage of water in the sample can be calculated using the formula given above.
Finally, the ratio of moles of water to moles of dry sample can be found by dividing the percentage of water by 100.
Learn more about Molar mass
brainly.com/question/22997914
#SPJ11
Problem 11.9 Starting with acetyl chloride; what neutral nucleophile would you use to make each of the following compounds? Part € CH; Draw the molecule on the canvas by_ toolbars_
To make each of the following compounds starting with acetyl chloride, neutral nucleophiles to be used are:Compound Part € CH: To prepare this compound starting with acetyl chloride, neutral nucleophile, ethylamine (C2H5NH2) is used. Here's how you can prepare it.
neutral nucleophile to be used to prepare Compound Part € CH is C2H5NH2. You can prepare it by reacting acetyl chloride with ethylamine. The reaction of acetyl chloride with ethylamine produces CH3C(O)NHC2H5 by releasing
hydrogen chloride gas. Parts a, b, c: The compounds given in parts a, b, and c are carboxylic acids. To prepare these carboxylic acids starting with acetyl chloride, neutral nucleophiles to be used are NaOH, H2O, and CH3COOH,
respectively. Here's how you can prepare these compounds:Part a: CH3COCl + NaOH → CH3COONa + HClPart b: CH3COCl + H2O → CH3COOH + HClPart c: CH3COCl + CH3COOH → CH3COOCH3 + HCl
Thus, the neutral nucleophiles to be used to prepare Part a, b, and c are NaOH, H2O, and CH3COOH, respectively. You can prepare them by reacting acetyl chloride with NaOH, H2O, and CH3COOH, respectively. The reactions of acetyl chloride with NaOH, H2O, and CH3COOH produce CH3COONa, CH3COOH, and CH3COOCH3, respectively, by releasing hydrogen chloride gas.
For more similar questions on topic neutral nucleophile
brainly.com/question/14052597
#SPJ11
if the temperature of a gas in a container is doubled, the pressure is . select one: a. reduced by four times b. halved c. increased by four times d. doubled
The temperature of a gas in a container is doubled, the pressure is: option (D) states "Doubled".
The relationship between the pressure and temperature of a gas is described by Gay-Lussac's law, which states that if the temperature of a gas in a container is doubled, the pressure is doubled as well. Hence, the answer is (d) doubled.
Explanation:In a closed container, the gas molecules move around randomly, colliding with each other and with the walls of the container. The pressure of the gas is determined by the frequency and force of these collisions, which in turn depend on the speed and number of gas molecules present in the container.
When the temperature of the gas is increased, the kinetic energy of the gas molecules also increases, causing them to move faster and collide more frequently with each other and with the walls of the container. This leads to an increase in the pressure of the gas.
Similarly, when the temperature of the gas is decreased, the gas molecules slow down and collide less frequently, leading to a decrease in the pressure of the gas. This relationship between pressure and temperature is known as the ideal gas law, which is expressed mathematically as:
[tex]P = nRT/V,[/tex]
where P is the pressure of the gas, n is the number of gas molecules, R is the ideal gas constant, T is the temperature of the gas in Kelvin, and V is the volume of the container.
To know more about pressure refer here:
https://brainly.com/question/28907914#
#SPJ11