(financial application: compute the future investment value) write a method that computes future investment value at a given interest rate for a specified number of years. the future investment is determined using the formula in programming exercise 2.21. use the following method header: public static double futureinvestmentvalue(double investmentamount, double monthlyinterestrate, int years) for example, futureinvestmentvalue(10000, 0.05/12, 5) returns 12833.59. write a test program that prompts the user to enter the investment amount (e.g., 1000) and the interest rate (e.g., 9%) and prints a table that displays future value for the years from 1 to 30, as shown below: the amount invested: 1000 annual interest rate: 9 years future value 1 1093.80 2 1196.41 ... 29 13467.25 30 14730.57 class name: exercise06 07

Now, let's discuss the difference between a language, such as Dart, and a mobile SDK, such as Flutter.A language, such as Dart, provides the rules of syntax and additional libraries and tools specific to building a program for mobile devices. On the other hand, a mobile SDK, such as.

Flutter, provides a standard library and compiler, as well as an editing environment (IDE) and additional libraries and tools specific to building a program for mobile devices. Therefore, the most accurate description of the difference between a language, such as Dart, and a mobile SDK, such as Flutter, is that the language provides the rules of syntax and additional libraries, while the mobile SDK provides the standard library and compiler, IDE, and additional libraries and tools specific to building a program for mobile devices. In other words, the language provides the building blocks, while the mobile SDK provides the platform on which to build. The mobile SDK is responsible for compiling the code for mobile devices, such as ARM processors, while the language provides the syntax and libraries.

For more such question on library

https://brainly.com/question/30949500

#SPJ11

To directly go to the corrupted spot identified by the Spot Verifier service, Parker should use the CHKDSK command with the appropriate parameters to target the specific volume and spot.

The steps to do this are as follows:

After the process is complete,  Parker can view the Chkdsk results in the Event Viewer. This will show the specific errors and corrupted spots that were identified by the Spot Verifier Service. Parker can then navigate to these locations to address any issues that were found.

Learn more about CHKDSK command: https://brainly.com/question/14666638

#SPJ11

To implement your physical security plan, you should:

1. Drag the correct items from the shelf

2. Drop them onto the highlighted locations in the building.

To implement your physical security plan, You need to do the following steps:

First, drag the items from the shelf onto the various locations in the building. You should note that the possible drop locations are highlighted, which makes it easier for you to ensure that you are putting the items in the correct place.

Next, you should review your plan to make sure that you have included all necessary items and that they are placed in the right location. This is essential to ensure that the security plan is effective and that all areas of the building are protected.

Finally, you should test your security plan to make sure that it is working correctly.

You should run tests to see how well the plan works and make adjustments as necessary. This will help you to identify any potential vulnerabilities or weak points in your security plan and address them accordingly.

Learn more about physical security at

https://brainly.com/question/14718352

#SPJ11

The result of applying softmax when the output of the neural network is (0.4,2.0,0.001,0.32)% is (0.091,0.731,0.001,0.176).

Softmax function is a very useful activation function that helps in producing probability distribution over multiple classes. In general, it is used in the last layer of neural networks as it converts the output of the previous layer into a probability distribution.

The softmax function is represented as:

f(z) = ez/∑jez

Where j is the index of classes, z is the input of the softmax function, and f(z) is the output of the softmax function. It returns a probability distribution among the output classes. Hence, the result of applying softmax when the output of the neural network is (0.4,2.0,0.001,0.32)% is (0.091,0.731,0.001,0.176).

You can learn more about neural networks at: brainly.com/question/14632443

#SPJ11

To change the working directory version of new mod.c to the version that was part of the commit with sha 87ff65a, the command that can be used is:

git checkout 87ff65a -- new mod.c

This command checks out the version of new mod.c that was present in the commit with the SHA 87ff65a.

The "git checkout" command is used to switch branches or restore files in a repository. The "--" flag is used to indicate that the subsequent argument is the path to the file being checked out.

In summary, to change the working directory version of new mod.c to the version that was part of the commit with sha 87ff65a, use the command "git checkout 87ff65a -- new mod.c".

For such more question on repository

https://brainly.com/question/30454137

#SPJ11

The resources that are loaded using the hypertext transfer protocol are web page and map graphics.

It contains a variety of information, such as text, images, videos, and links, that are displayed on a computer or mobile device using a web browser. HTML, CSS, and JavaScript are commonly used to create web pages.What are map graphics Map graphics are visual representations of geographic data, such as maps, charts, graphs, and diagrams. They are often used to help users understand complex data or information by presenting it in a more understandable and engaging format. Map graphics are commonly used in websites, mobile applications, and other digital products to provide location-based information and services.What is the hypertext transfer protocol?The hypertext transfer protocol (HTTP) is a protocol that is used to transfer data over the internet. It is the foundation of data communication on the World Wide Web and is responsible for fetching web pages, images, and other resources from web servers to user devices. HTTP is the underlying protocol used by browsers to communicate with web servers and is responsible for delivering web pages and other resources to users.

Learn more about web page here:

https://brainly.com/question/8307503

#SPJ11

Answer:

1. I would want to record in a quiet and spacious room with minimal background noise, such as a conference room or studio. To set up the space, I would arrange the chairs in a semi-circle facing the microphone and ensure that each guest has their own microphone to ensure clear audio quality.

2. I would like to record some of the audio at the Salt River in Arizona, where the water levels have drastically decreased due to the drought. I would record the sound of the river flowing and interview locals who rely on it for their livelihoods.

3. One feature of a digital audio workstation that can enhance a podcast is the ability to add effects such as EQ, compression, and reverb to improve the overall sound quality. Another feature is the ability to edit and manipulate audio files, allowing for seamless transitions between segments and removing any unwanted noise or mistakes.

4. Consider your passions, hobbies, and areas of expertise when brainstorming podcast topics. Some potential ideas could include discussing current events, interviewing experts in a particular field, or sharing personal stories and experiences.

5. I would explain to my friend that using music labeled as not available for reuse without permission is a violation of copyright laws and can result in legal consequences. It's important to respect the rights of the original creators and find alternative options for music that can be used legally.

Explanation:

The statement that is true is that passing all test cases ensures a program is bug-free.A testbench is a module that generates stimuli for a Design Under Test.

(DUT) and evaluates the outputs from that DUT. It essentially verifies if the DUT satisfies the design specification, i.e., it checks if the DUT behaves as anticipated by the designer. This is accomplished by generating stimulus signals for the DUT and verifying that the response signals from the DUT match the desired outputs.This is usually accomplished by generating a series of test inputs for the design and evaluating the outputs to see whether or not they match the expected results. During this procedure, the testbench outputs the data to the console to provide feedback on what is happening.The statement that is true is that passing all test cases ensures a program is bug-free. Since it guarantees that the code meets the requirements and has been thoroughly tested for all use cases, this is a crucial measure for any software or coding projects. In addition, testing may identify problems before they become more costly and difficult to address.

Learn more about  testbench  here:

https://brainly.com/question/15052157

#SPJ11

Answer:

I would explain to my friend that using music labeled as not available for reuse without permission is a violation of copyright laws and can result in legal consequences. It's important to respect the rights of the original creators and find alternative options for music that can be used legally.

Explanation:

To set up a hotspot on your smartphone, go to the settings menu and look for the option to create a hotspot or tethering network. Follow the prompts to set it up, and then connect your laptop to the hotspot using Wi-Fi.

There are a few ways to connect your Windows 8 Pro Probook laptop to the internet without using a PCI driver or a command prompt. Here are some solutions:Use an Ethernet cable: If your laptop has an Ethernet port, you can connect it to your modem or router using an Ethernet cable. This will give you a wired internet connection that does not require any drivers or special software. Just plug in the cable and you should be good to go.Use a USB Wi-Fi adapter: If your laptop does not have built-in Wi-Fi or if the Wi-Fi is not working properly, you can purchase a USB Wi-Fi adapter. These small devices plug into your laptop's USB port and provide a wireless internet connection. Most USB Wi-Fi adapters come with a driver CD or a link to download the necessary software online. Once you have installed the driver, you should be able to connect to Wi-Fi networks like any other device.Use your smartphone as a Wi-Fi hotspot: If you have a smartphone with a data plan, you can use it as a Wi-Fi hotspot to connect your laptop to the internet. This requires no drivers or special software, but you will need to pay attention to your data usage to avoid going over your plan's limits.

Learn more about laptop here:

https://brainly.com/question/30256675

#SPJ11

The explanation of an assignment that gives its parameters and provides the criteria for grading is typically called the assignment rubric.

A  rubric is a document that outlines the expectations and criteria for a particular assignment. It typically includes information such as the word or page count, types of sources that should be used, and other parameters that will be used to evaluate the assignment.

The rubric provides a clear framework for students to understand what is expected of them and how their work will be evaluated. It also helps ensure that grading is consistent and fair, as each assignment will be evaluated according to the same criteria.

Find out more on rubrics at https://brainly.com/question/8536552

#SPJ1

A pretest loop is a type of loop that checks for the condition before executing any of the loop body instructions. The do-while loop is an example of a post-test loop because it first executes the loop body instructions before checking the condition.

The for loop, while loop and do-while loop are the three types of loops available in most programming languages. A sentinel value is a special value used in programming to indicate the end of input or processing. It's used to signal that the loop should stop and that the program should begin processing the input it has collected thus far. It's frequently used in conjunction with loops to gather input from a user or other source before processing it. The loop body of a pretest loop should include a way to enter the sentinel value after the first set of loop body instructions has been processed. This can be accomplished in a variety of ways, depending on the programming language and the specific requirements of the program. For example, in Python, you might use a while loop to read input from the user and check for the sentinel value, such as "quit" or "end", at the beginning of each iteration.

learn more about the pretest loop here:

https://brainly.com/question/29215267

#SPJ11

Answer:

USB 3.0 = 4,800 Mbps / 4.8 Gbps

Explanation:

The top speed of USB 3.0 is 4,800 Mbps. So, the correct option is D.

USB 3.0 is a version of USB (Universal Serial Bus) technology that was released in 2008. USB 3.0 provides faster data transfer speeds, increased power management capabilities, and improved multimedia streaming capabilities over USB 2.0.USB 3.0 is capable of transferring data at a maximum speed of 4,800 Mbps, which is ten times faster than the maximum speed of USB 2.0.

USB 3.0 can handle transfer rates of up to 5 Gbps, or 640 MB/s when compared to USB 2.0's transfer rate of 480 Mbps or 60 MB/s. As a result, USB 3.0 devices can transfer data much faster than USB 2.0 devices.

You can learn more about the speed of USB at: brainly.com/question/13361212

#SPJ11

A binary search tree can be used as the implementation of the map ADT. Yes, this is a good choice for this implementation.

What is a binary search tree?A binary search tree is a kind of binary tree in which each node has at most two child nodes, commonly known as left and right child nodes. It has the following features:Each node has a unique key. The left subtree of a node contains only keys lesser than the node's key.The right subtree of a node contains only keys greater than the node's key.Both the left and right subtrees must be binary search trees themselves. We can use the binary search tree data structure as the basis for the map ADT implementation. As a result, for a given key, the tree structure maps keys to values. Since the tree maintains keys in sorted order, it's easy to find an element in the binary search tree. The data structure is frequently employed in search-based applications due to its efficiency.The map ADT can be implemented using a variety of data structures, including a binary search tree. It is appropriate to use a binary search tree for this purpose because it has all of the required functionality for the map ADT, such as insert, delete, search, and update functions. Furthermore, the binary search tree's time complexity for these operations is generally low. As a result, we may conclude that using a binary search tree as a map ADT implementation is a good decision.

learn more about binary search tree here:

https://brainly.com/question/12946457

#SPJ11

The output of the program is "JKLM".

The output of the program would be "JKLM". The program first initializes two integer variables, a and b, to 10 and 5 respectively. It then adds the two variables together and assigns the result to variable c.

The program then checks if a is not equal to c using the "!=" operator. Since 10+5=15 and a is equal to 10, a is not equal to c. Therefore, the program enters the first "if" statement and prints "ABCD" using the "cout" statement.

However, since there is an "else if" statement in the program, the program checks the condition in the "else if" statement as well. In this case, a is not equal to b (since a is 10 and b is 5), so the program skips this "else if" statement.

The program then enters the "else" statement, which means that neither the "if" nor the "else if" condition was met. Therefore, the program prints "JKLM" using the "cout" statement in the "else" block.

To learn more about Program

https://brainly.com/question/23275071

#SPJ11

The mission area of "Protecting Critical Infrastructure and Key Resources" (CIKR), these core capabilities would fall.Cybersecurity Cybersecurity refers to the protection of computer systems and networks from cyber attacks, data theft, and unauthorized access.

For such more question on integrity

https://brainly.com/question/30398377

#SPJ11

Critical word first and early restart on L2 cache misses:With critical word first and early restart on L2 cache misses, it would take 240 cycles to service a miss. It would take 184 cycles to service a miss without critical word first and early restart.

In 120 cycles, the first block of data can be transferred to the L2 cache. The refill path is 16 bytes wide and the L2 cache can write 16 bytes every four processor cycles. Therefore, it takes 16 cycles to transfer each additional block of data. The L2 cache has 1MB of memory, which consists of 64-byte blocks. Therefore, it will take 1MB/64B=16,384 blocks to fill the cache. With critical word first and early restart on L2 cache misses, the L2 cache uses critical word first and early restart techniques. As a result, the data can be bypassed directly into the read port of the L2 cache. As a result, when a critical word is detected, the data is delivered to the processor without waiting for the entire block to be read. With critical word first and early restart on L2 cache misses, a miss would take 240 cycles to service.Each 64-byte block of memory takes 16 cycles to transfer. To transfer all of the blocks to fill the cache, 16,384 x 16 = 262,144 cycles would be required. After the first block is transferred, 15 blocks are needed to fill the refill path. Therefore, it takes 15 x 16 = 240 cycles to service a miss.Without critical word first and early restart on L2 cache misses, the entire block must be read before it can be delivered to the processor. As a result, all 64 bytes must be read before the critical word can be delivered. Because the refill path is only 16 bytes wide, it takes four cycles to deliver a 64-byte block of data to the L2 cache. As a result, the time required to read the entire block is 64 x 4 = 256 cycles. After the first block is transferred, it takes 15 blocks to fill the refill path. Therefore, the time required to fill the refill path is 15 x 4 = 60 cycles. It takes 120 cycles to receive the first 16-byte block from the memory controller. Therefore, it takes a total of 120 + 256 + 60 = 436 cycles to service a miss without critical word first and early restart.
To service an L2 cache miss with critical word first and early restart, follow these steps:

1. Wait for the first 16-byte block containing the critical word to arrive from the memory controller (120 cycles).
2. Bypass the critical word directly into the read port of the L2 cache.
3. Transfer the remaining 64 - 16 = 48 bytes in 4-byte chunks. Each chunk takes 16 cycles, so transferring the remaining bytes takes 3 * 16 = 48 cycles.

Total cycles with critical word first and early restart: 120 + 48 = 168 cycles.

To service an L2 cache miss without critical word first and early restart:

1. Wait for the entire 64-byte block to arrive from the memory controller. The first 16-byte block takes 120 cycles, and the remaining 3 blocks take 16 cycles each, for a total of 120 + (3 * 16) = 120 + 48 = 168 cycles.

Total cycles without critical word first and early restart: 168 cycles.

In this scenario, the number of cycles to service an L2 cache miss is the same with and without critical word first and early restart, which is 168 cycles.

To know more about processor, click the below link

https://brainly.com/question/28902482

#SPJ11

Answer: Yes

Explanation: because it uses less energy and creates less waste, 3D printers can reduce the cost of production as well.

(gimme a thanks if you dont mind)

Yes, Uma has understood the topic well. It is true that to create a pivot table, it is not necessary to highlight the entire data range. All you have to do is click on any cell within the data range, and then go to the "Insert" tab and select "Pivot Table" to create a pivot table.

A pivot table is a tool that allows users to summarize large data sets into more manageable formats. It is used to aggregate, sort, count, and total the data contained in one or more columns. Pivot tables are interactive, meaning that they can be adjusted and customized to meet the needs of the user.Pivot tables are useful because they allow users to see patterns and trends in large data sets quickly. They are commonly used in business and finance, but they can be used in any situation where large amounts of data need to be summarized and analyzed.

Learn more about Pivot Table   here:

https://brainly.com/question/30543245

#SPJ11

The proliferation of mobile devices that are locally powerful is increasingly common. These devices are known for their ability to use apps instead of full-fledged applications.

These mobile devices are becoming more and more popular because they offer a range of benefits over traditional desktop and laptop computers. For starters, mobile devices are far more portable than traditional computers. This makes them ideal for people who are always on the move, such as students, businesspeople, and anyone else who needs to be able to work on the go.Mobile devices are also great because they can run a wide range of applications. These applications can be downloaded and installed in seconds, giving users access to a wide range of tools and utilities that they can use to improve their productivity and stay connected with others. Mobile devices are also great for people who want to stay connected with others. They can be used to send and receive emails, browse the web, and access social media platforms like Faceb##k and T#itter. Overall, the proliferation of mobile devices that use apps instead of full-fledged applications is a positive development. These devices are easy to use, highly portable, and offer a wide range of benefits over traditional computers.

Learn more about applications here:

https://brainly.com/question/31164894

#SPJ11

Given five memory partitions of 100k, 500k, 200k, 300k, and 600k (in order), the placement of processes of 212k, 417k, 112k, and 412k (in order) by first-fit, best-fit, and worst-fit algorithms are as follows:First-fit AlgorithmFor the first process of size 212k, the first-fit algorithm will allocate the process.

to the first partition of size 500k since it is the first partition with sufficient size.For the second process of size 417k, the first-fit algorithm will allocate the process to the partition of size 600k since it is the first partition with sufficient size.For the third process of size 112k, the first-fit algorithm will allocate the process to the partition of size 200k since it is the first partition with sufficient size.For the fourth process of size 412k, the first-fit algorithm will allocate the process to the partition of size 500k since it is the first partition with sufficient size.Best-fit AlgorithmFor the first process of size 212k, the best-fit algorithm will allocate the process to the partition of size 300k since it is the smallest partition that can hold the process.For the second process of size 417k, the best-fit algorithm will allocate the process to the partition of size 500k since it is the smallest partition that can hold the process.For the third process of size 112k, the best-fit algorithm will allocate the process to the partition of size 200k since it is the smallest partition that can hold the process.For the fourth process of size 412k, the best-fit algorithm will allocate the process to the partition of size 500k since it is the smallest partition that can hold the process.Worst-fit AlgorithmFor the first process of size 212k, the worst-fit algorithm will allocate the process to the partition of size 600k since it is the largest partition available.For the second process of size 417k, the worst-fit algorithm will allocate the process to the partition of size 600k since it is the largest partition available.For the third process of size 112k, the worst-fit algorithm will allocate the process to the partition of size 500k since it is the largest partition available.For the fourth process of size 412k, the worst-fit algorithm will allocate the process to the partition of size 600k since it is the largest partition available.The most efficient use of memory is achieved by the best-fit algorithm since it allocates processes to the smallest partition that can hold the process, thus minimizing internal fragmentation.

Learn more about  algorithms  here:

https://brainly.com/question/22984934

#SPJ11

The given statement is true. Network address translation (NAT) is an internet engineering task force (IETF).

standard used to allow multiple computers on a private network (using private address ranges such as 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16) to share a single, globally routable IPv4 address.What is Network address translation (NAT)?Network Address Translation (NAT) is a method for assigning a public IP address to a device or computer that is behind a router. NAT is needed when your ISP only gives you a single public IP address, but you have several devices or computers in your home that you want to use on the internet. NAT takes care of translating the private IP addresses assigned to your devices and computers into a single public IP address that is used on the internet. This method is commonly used by households or small businesses with multiple computers or devices that use the internet simultaneously.

learn more about Network here:

https://brainly.com/question/13102717

#SPJ4

The Scanner class method that reads an int is `nextInt()`. This method is used to read an integer input from the user during a program's execution. It is a part of the Java. util package and is commonly used in Java programming.

To use this method, follow these steps:

1. Import the Scanner class: `import java.util.Scanner;`
2. Create a Scanner object: `Scanner scanner = new Scanner(System.in);`
3. Use the `nextInt()` method to read an integer: `int number = scanner.nextInt();`

So, the correct answer from the given group of answer choices is `nextInt()`.

You can learn more about the Scanner class method at: brainly.com/question/30770759

#SPJ11

The qubit is a two-state quantum-mechanical system, whereas the classical bit is a two-state binary system. The two states of a qubit are represented by |0⟩ and |1⟩. The two states of a classical bit are represented by 0 and 1. A qubit can encode an infinite amount of information by superposition and entanglement.

Superposition: In quantum computing, a qubit can exist in multiple states simultaneously, meaning that the qubit can represent 0 and 1 simultaneously. This allows for a much greater amount of information to be encoded in the qubit than in the classical bit.

Entanglement: Entanglement is a quantum-mechanical phenomenon where two or more particles can become correlated in such a way that the state of one particle can instantly affect the state of the other particle, even if the two particles are separated by large distances. This allows for information to be transmitted faster than the speed of light.

One classical bit's worth of information can be extracted from a qubit using the process of measurement. Measurement is the process of determining the state of a qubit. When a qubit is measured, it collapses into one of two states, |0⟩ or |1⟩, with a certain probability depending on its initial state. Therefore, only one classical bit's worth of information can be extracted from a qubit using measurement.

You can learn more about qubit at: brainly.com/question/28096910

#SPJ11

The security control that is most helpful in protecting against eavesdropping on wide area network (WAN) transmissions is encryption. It is critical to ensure the security of data during these transmissions, which is why encryption is an essential security control.

What is encryption?Encryption is the process of converting data into an unintelligible code to safeguard the information's confidentiality and ensure that it can only be viewed by authorized persons. It is a means of safeguarding data from being accessed by unauthorized individuals. To protect data from eavesdropping, encryption is one of the most reliable security controls.What is eavesdropping?Eavesdropping is the act of secretly listening to or intercepting private communications without authorization. It's a malicious attempt to gain access to the contents of someone's message. Eavesdropping on WAN transmissions is a major concern, and encryption is used to protect against it.Wide area network (WAN) transmissions refer to data transfer between two or more remote locations over a network.

Learn more about security control here:

https://brainly.com/question/28261273

#SPJ11

The order of magnitude in the state of the art data volume, computing power, and network speed for a typical big data scientific application is:

b. 1G Bytes, 10Tflop/s, & 1Gb/s, respectively

This is because big data scientific applications typically involve processing large datasets that can be in the order of gigabytes or terabytes, and require high computing power in the order of teraflops or more to process the data efficiently. Additionally, the data is often distributed across multiple systems, requiring high-speed networks to transfer the data between nodes. Option (b) represents the closest order of magnitude for these parameters, making it the correct answer.

Learn more about computing power here:

https://brainly.com/question/31100978

#SPJ11

When you use the animate() method, you must code css properties to define the animation.Animate() MethodThe animate() method animates the HTML elements. It is not possible to use an animated property for numeric properties such as margin or padding.

For such more question on Parameters

https://brainly.com/question/29887742

#SPJ11

For connecting many end hosts to a switch which is in a wiring cabinet on the same office floor as the hosts, the company should use an Ethernet cable.  Ethernet cable is also known as RJ-45 because it has an 8-pin connector with eight visible and smaller connectors inside it.

What is a wiring cabinet?A wiring cabinet is a cabinet in which cables and electronic equipment are housed. Wiring cabinets are typically seen in telecommunications, home networking, and office networking systems. They are usually positioned near the edge of a room, and the length of the cabling used to connect them is determined by the room's size.A switch is a network device that directs data packets between devices on a network. It establishes a connection between the source and the destination devices by opening and closing communication channels. A switch's connections may be made using copper or fiber-optic cabling, both of which can support Gigabit Ethernet speeds.Therefore, Ethernet cable is used for connecting many end hosts to a switch that is in a wiring cabinet on the same office floor as the hosts. Ethernet cables are networking cables that link one device to another. They transmit data from the Internet to your computer, television, gaming system, or other wired network device. Ethernet cable is also known as RJ-45 because it has an 8-pin connector with eight visible and smaller connectors inside it.

Learn more about  wiring cabinet here:

https://brainly.com/question/30562560

#SPJ11

Polymorphism enables you to program in the general, meaning you can write code that works with objects of multiple classes, as long as they share a common interface or parent class. So, option D is correct.

Polymorphism enables you to program in the general, by creating code that can work with objects of different classes, and still achieve the desired result. This means that you can create a single method or function that can handle multiple object types, as long as they share a common interface or parent class. This provides a high degree of flexibility and extensibility, as new classes can be easily added and integrated into the existing codebase. Polymorphism can also be used to absorb attributes and behavior from previous classes, through inheritance, and to hide information from the user, by encapsulating data and only exposing necessary information through public methods. Overall, polymorphism is a powerful programming concept that enables efficient, modular, and scalable code.

learn more about Polymorphism here:

https://brainly.com/question/29850207

#SPJ4

The actual question is:

Polymorphism enables you to: group of answer choices

A) hide information from the user

B) program in the specific

C) absorb attributes and behavior from previous classes

D) program in the general

The  thing that an administrator  should do to satisfy this requirement are:

To satisfy this requirement, an administrator can create an automated solution using Salesforce's Case Assignment Rules and sharing rules.

By following these steps, the administrator can create an automated solution that will ensure all new cases related to the new product are assigned to a specific queue and that the two lead engineers have read/write access to those cases. This will allow the engineers to stay up to date on all cases related to the new product and to collaborate effectively to resolve any issues that arise.

Learn more about administrator  here:https://brainly.com/question/30206212

#SPJ1