Answer:
From the very beginning, the developing cells need oxygen and nutrients. The fetus receives its nutrition from the mother through the placenta and the umbilical cord.
Explanation:
An element with a force of 0.00SN moves at a minimum: 0.2m / s². Calculate the mass of that element.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
for rogue waves to form so often, they must follow a non linear system, instead of the linear constructive interference system scientists once thought it was to explain these waves. What does it mean to be a non linear equation?
Rogue waves are unpredictable and sudden waves that appear as surface waves and that have the ability to make ships capsize. For a wave to be a non-linear equation it means that it is unpredictable. What is expected does not actually happen. The resulting wave is often chaotic in nature.
In mathematics, a non-linear equation is one in which the input does not equal the output. This makes it more difficult to predict the outcome of variables. Also, a linear constructive interference system is one in which the meeting of two waves causes an amplification in which the resulting wave is equal to the sum of the individual waves. So, when rogue waves are said to be non-linear, it means that the resulting wave is not equal to the individual waves that formed it. They are chaotic and unpredictable.Learn more here:
https://brainly.com/question/12480390
A cliff diver dove off a cliff at 8 m/s and landed in the water 21 m away from the cliff. How high is the cliff?
The vertical height of the cliff on which the diver drove off is 33.76 m.
The given parameters;
horizontal velocity of the diver, v = 8 m/shorizontal distance traveled by the diver, X = 21The time of motion of the cliff diver is calculated as follows;
[tex]t = \frac{X}{v} \\\\t = \frac{21}{8} \\\\t = 2.625 \ s[/tex]
The vertical height of the cliff is calculated as follows;
[tex]h = v_0_y t + \frac{1}{2} gt^2\\\\h = 0 + 0.5 \times 9.8 \times 2.625^2\\\\h = 33.76 \ m[/tex]
Thus, the vertical height of the cliff on which the diver drove off is 33.76 m.
Learn more here:https://brainly.com/question/19261726
What is the use of a hydrometer
Answer:
A hydrometer is an instrument used to determine specific gravity
Answer:
it is used determine specific gravity
Explanation:
and u can see them in use by measuring proof of moonshine
5. SEP Construct Explanations If the line on
a distance-versus-time graph and the line on
a speed-versus-time graph are both straight
lines going through the origin, can the two
graphs be displaying the motion of the same
object? Explain.
Answer:
If and only if the object has 0 speed. Any other case is a no.
Explanation:
In increasing math complexity:
If the graph of a distance/time is a straight line with a non-zero slope it means that the velocity-time graph is an horizontal line where every point has the same second coordinate, equal to the value of the slope of the first line (ie, if the first line has equation [tex]y=2t[/tex] the second line will have equation [tex]y=2[/tex] - I'm using y to denote either the distance or the speed, read it as "the non-time variable")
If the graph of a speed/time is a straight line, the graph of the distance/time is the area of the region of space beneath the straight line in the first graph, ie a triangle. And as you increase the sides of that triangle keeping the angles fixed, you get a parabolic curve.
Bonus case: if [tex]v(t)= 0; d(t) = 0[/tex], they are both straight lines, they both pass through the origin, and they are the exact same line.
With calculus (or: math becomes fun after you add the alphabet to it)
You are asking if the answer of the IVP
[tex]\left \{ {{x'=x} \atop {x(0)=0}} \right.[/tex]
is a linear function. The answer is: besides the obvious [tex]x(t)'=x(t)=0 \ \forall t[/tex] there are no other solutions, linear or otherwise.
You use a rope 2.00 m long to swing a 10 kg weight around your head. The tension in the rope is 20 N. In half a revolution how much work in J is done by the rope on the weight
Answer:
No work is done on the weight. :3
To solve this we must be knowing each and every concept related to work and its calculation. Therefore, 250J is the work done in joule by the rope on the weight.
What is work?Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.
When a force is applied, it is said to produce positive work if it has a proportion in the orientation of the movement of a site of application. Work done is positive when the direction of force acting on the object and displacement of the object both are in the same direction.
Mathematically,
Work= force ×displacement
force =20 N
displacement=2.00 m
displacement=2×3.14×2=12.5m
substituting all the given values in the above equation, we get
Work= 20 ×12.5
Work =250J
Therefore, 250J is the work done in joule by the rope on the weight.
To learn more about work, here:
https://brainly.com/question/18094932
#SPJ5
100N force is applied to a ball with a mass of 0.25kg. Calculate the ball acceleration.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
Plzzzz help mee plzzzz help meeee
Answer:
1 $1260.00-$700.00=$560.00
2 $700.00/$1260.00*100= approximately 55.6%
Explanation:
* this sign means Multiplication
A car was sitting in sunlight all day long. The heat that is now contained in the car was transferred to the car primarily by which of the following processes? Question 1 options: radiation conduction convection electrical energy transfer.
this planet has a very toxic atmosphere that traps heat, making it the hottest planet in the solar system.
Answer:
Venus
Explanation:
basic 2nd grade smarts "no offense"
How is the input energy carried to the light bulb's energy stores?
Answer:
the electric energy travels through the plug or wire or whatever is connecting the energy source to the lightbulb, which conducts electricity, and to the light bulb. the electric energy is transfered into light energy and thermal energy
Explanation:
i hope i understood this question and answered it correctly XD
The length of a road is 35.5cm what will be the length in meters?
안녕하세요
answer is 355 meters ...
Answer:
0.355m
Explanation:
To convert from cm to m, divide by 100
35.5÷100=0.355m
In the year 2081 in a shipping port on the moon, workers for Ore-Space, Inc., hoist a 500.0 kg hunk of anorthosite moon rock by a chain. (Neglect the weight of the chain.) The block is initially accelerating at 4.0 m/s.
How much force is being exerted by the chain?
Answer:
2,800 n
Explanation:
hope this helps, have a nice day/night! :D
The force of 2812.5 N is being exerted by the chain.
What is force?An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
Given that:
Mass of the hunk of anorthosite moon rock : m = 500.0 kg.
Acceleration of the hunk: a = 4.0 m/s².
Acceleration due to gravity in moon = 1.625 m/s².
So, required force = 500.0(4.0 +1.625) n = 2812.5 N.
The force of 2812.5 N is being exerted by the chain.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
6. Explain a change that you can make in your diet to further your overall health.
Answer:
“Eat more delicious whole-food plants at every meal and snack. Fruits, vegetables, whole grains, nuts and seeds are packed with nutrients and contain satisfying fiber that is good for digestion, disease prevention and sustained energy.
Explanation:
What net force would be necessary to cause a block of wood with a mass of 2.5 kg to accelerate at a rate of 3.0 m/s2
Answer:
7.5 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
mass = 2.5 kg
acceleration = 3.0 m/s²
We have
force = 2.5 × 3.0 = 7.5
We have the final answer as
7.5 NHope this helps you
an empty bottle weight 22.4 g when empty,406g when filled with water and 52.8g when filled with liquid x
Answer:
question is incomplete
You increase your walking speed from 1 m/s to 3 m/s in a period of 1 s.
What is your acceleration?
5 m/s2
3 m/s2
2 m/s2
4 m/s2
Answer:
2 m/s2
Explanation:
the answer is 2 m/s2
Hãy giải thích sự phát âm của cái sáo khi thổi vào nó
When is it safer to drive a heavier car over a lighter car?
a. When you crash into a wall
b. When you crash into a tree
c. When you crash into another car
d. It is never safe in a hevaier car
Answer:
I think it would be c, crashing into another car
Tại sao khi bị sì hơi quả bóng bay sẹp lại?
Answer:
what is this language??
Select two of Earth's spheres and explain how they interact with each other.
atmosphere, biosphere, cryosphere, geosphere and hydrosphere
HELPPPPPPPP!!!!!
Answer and Explanation: The geosphere interacts with the cryosphere when glaciers and sheets of ice from the cryosphere erode the rocks located on the geosphere. This happens as ice passes over the land and carries eroded rocks to new locations. The cryosphere can also cause soil to become icy and take hold of greenhouse gases from the atmosphere. The geosphere is the part of the Earth that has rocks, minerals, sand, and lava. The cryosphere has frozen water, ice, and glaciers. The cryosphere also interacts frequently with the hydrosphere because it draws water from the hydrosphere and freezes it during cold temperatures. Warmer temperatures cause the cryosphere to melt and release water back to the hydrosphere.
The object in this diagram has a mass of 2 kg.
According to this diagram, what is the acceleration of this object?
A. 0 m/s2
B. 4 m/s2
C. 7 m/s2
D. 11 m/s2
Answer:
[tex]4 ms^{-2}[/tex]
Explanation:
Normal force - should be the reaction from the surface it's on - nullifies the weight of the object. At this point the only force is of [tex]22-14 = 8N[/tex] from whoever is pushing the square and the friction, towards the right. At this point we divide the force by the mass of the object to obtain an acceleration of [tex]8/2 = 4 ms^{-2}[/tex]
6. Two skaters, Jim (65 kg) and Mary (50 kg) are standing at rest on the ice. They push each other
and Mary recedes at 2.5 m/s towards the east. Find Jim's velocity (magnitude and direction).
Hi there!
This is an example of a recoil collision.
Let m1, v1 be Mary
Let m2, v2 be Jim
Utilize the conservation of momentum:
m1v1 + m2v2 = m1v1' + m2v2'
The initial velocities are zero (at rest), so:
0 = m1v1' + m2v2'
Let east be positive, so Jim recoils with a negative velocity:
0 = m1v1' - m2v2'
Set the two equal and solve:
m1v1' = m2v2'
m1v1'/m2 = v2'
(50)(2.5)/65 = v2' = 1.92 m/s to the WEST
How does air and debris travel within a tornado?
Answer:
anywhere the tornado goes debri goes except for the more heavier pieces they just go in random places but the lighter pieces stay with the tornado until the tornado is gone or disinegrated
Explanation:
around and around
The weight of a cart with a mass of 150 kg is ___ N. (Use 9.8
m/s2 for the acceleration due to gravity.)
Answer:
1470 N
Explanation:
Weight = m*g
So 150 kg * 9.8 m/s^2 = 1470 N
Find the work done while lifting a 115 kg sofa 1.5 m off the ground.
Find the weight first
P= 10m = 10 x 115 = 1150 N
work done while lifting a 115 kg sofa 1.5 m off the ground :
A= Ph = 1150 x 1.5 = 1725 J
P/s: I think the weight first is 115kg
ok done. Thank to me :>
when the acceleration of a block in simple harmonic motion on a spring is zero, what other quantity is also zero?
Hi there!
When the acceleration of a block in SHM is 0 m/s², the NET FORCE must equal 0 N.
0 m/s² acceleration is obtained when the spring is at its equilibrium point, meaning that:
∑F = -kx (x = displacement from equilibrium point in meters)
If the block is at the equilibrium point, displacement = 0m, so:
∑F = -k(0) = 0 N
With Newton's Second Law, ∑F = ma. If the net force is 0 N, then there is no acceleration experienced by the block.
Thus, the other quantity that must be 0 is the block's NET FORCE.
A block with initial velocity of 3 m/s slides 9 m across a rough horizontal surface before coming to rest. What is the coefficient of kinetic
friction?
The coefficient of kinetic friction between the block and the horizontal surface is 0.051.
The given parameters;
initial velocity, u = 3 m/sdistance traveled by the block, s = 9 mThe acceleration of the block is calculated as follows;
[tex]v^2 = u^2 + 2(-a)s\\\\v^2 = u^2 - 2as\\\\a = \frac{u^2 - v^2}{2s} \\\\a = \frac{3^2 - 0^2}{2\times 9} \\\\a =0.5 \ m/s^2[/tex]
The coefficient of kinetic friction between the block and the horizontal surface is calculated as follows;
[tex]\mu_k mg = ma\\\\\mu_k = \frac{a}{g} \\\\\mu_k = \frac{0.5}{9.8} \\\\\mu_k = 0.051[/tex]
Learn more here:https://brainly.com/question/19454558
A 68 g plastic ball is moving to the left at 17 m/s . How much work must be done on the ball to cause it to move to the right at 17 m/s ?
Answer:
KE = 19.652 J to the right
Explanation:
KE = J or N*m
KE = (1/2)m*v²
KE = kinetic energy
m = mass(kg)
v = velocity (m/s)
KE = .5*0.068kg*(17m/s)²
KE = 9.826 J to the left
So double it to the right to get 17m/s.
KE = 19.652 J to the right
J = Joules or can be expressed as N*m which is Newton-meters.
Hi can u help me in my physics homework
Answer:
a.) [tex]5 seconds[/tex]
b.) [tex]9.5 m/s[/tex]
Explanation:
Solution is attached.