Answer:
The correct statements regarding vacuum filtration are:
A short-stem funnel can be used for a vacuum filtration.
The size of the funnel must be adjusted based on the quantities being handled.
Explanation:
Vacuum filtration is a technique commonly used in chemistry labs to separate solids from liquids. A short-stem funnel is often used as it provides a better seal with the filter paper. The size of the funnel is chosen based on the volume of the liquid being filtered. If it is too small, the liquid will take longer to pass through the filter, and if it is too large, the filter paper may tear or the solid may not be retained properly. However, some statements regarding vacuum filtration are incorrect. Filter paper can be used with a wide range of solutions, including acidic and basic ones, as long as the filter paper is compatible with the solution. A hirsch funnel requires filter paper to function correctly. Lastly, vacuum filtration should be avoided with boiling solutions as the filter paper can disintegrate or the flask may crack under the pressure. Instead, hot filtration is used by filtering the solution while it is hot and then allowing it to cool to room temperature before collecting the solid.
The correct options are: 1, 2, and 4. Vacuum filtration is a commonly used technique in chemistry for separating solids from liquids. It involves using a vacuum to create a pressure difference across a filter, causing the liquid to be drawn through the filter while leaving the solid behind.
The technique is used in a variety of applications, such as separating precipitates from solutions or collecting cells from a culture. The following statements are correct regarding a vacuum filtration:
1. A short-stem funnel can be used for a vacuum filtration.
2. The solution cannot be too acidic or too basic when using filter paper.
3. No filter paper is needed when using a Hirsch funnel.
4. The size of the funnel must be adjusted based on the quantities being handled.
Therefore, correct options are: 1, 2, and 4.
When performing a vacuum filtration, it is important to select the appropriate size and type of funnel for the amount and type of material being filtered. It is also crucial to choose the correct filter paper, which should be compatible with the chemical properties of the solution being filtered. The use of a fritted glass filter or a Hirsch funnel may be necessary in some cases.
Vacuum filtration can be a time-saving and efficient method of separating solids and liquids, but it is important to carefully follow proper techniques and safety precautions to avoid any accidents or contamination.
To learn more about Vacuum filtration here:
https://brainly.com/question/31326542
#SPJ11
should a buffers ph increase, decrease, or be unchanged by the addition of water? explain your answer
The pH of the buffer solution is relatively stable and does not change significantly upon the addition of small amounts of acid or base.
The pH of a buffer solution is determined by the equilibrium between a weak acid and its conjugate base or a weak base and its conjugate acid. When water is added to a buffer solution, the concentration of the buffer components does not change, and the ratio of the weak acid and its conjugate base or weak base and its conjugate acid remains constant. Therefore, the pH of the buffer solution remains unchanged.
However, the addition of large amounts of water can dilute the buffer solution and cause a slight increase in pH due to the decrease in concentration of the buffer components. This effect is more pronounced in weaker buffer solutions. Therefore, in general, the pH of a buffer solution will remain relatively stable upon the addition of small amounts of water, but may increase slightly with the addition of large amounts of water.
To know more about the Buffer, here
https://brainly.com/question/30890340
#SPJ4
is 1250g of carbon is reacted with excess water, and 710g of methane (ch4) was recovered, what was the percent yield of the reaction
The balanced chemical equation for the reaction between carbon and water to form methane is:
C + 2H2O → CH4 + CO2
From the equation, we see that one mole of carbon reacts with two moles of water to produce one mole of methane.
To determine the theoretical yield of methane, we first need to convert the mass of carbon to moles:
1250 g C × (1 mol C/12.011 g C) = 104.11 mol C
Since one mole of carbon produces one mole of methane, the theoretical yield of methane is also 104.11 mol.
Next, we can use the molar mass of methane to convert the theoretical yield from moles to grams:
104.11 mol CH4 × (16.043 g CH4/mol) = 1669.9 g CH4
Therefore, the theoretical yield of methane is 1669.9 g.
The percent yield of the reaction is the actual yield (the amount of methane recovered) divided by the theoretical yield, multiplied by 100%.
percent yield = (actual yield / theoretical yield) × 100%
To find the actual yield, we use the given mass of methane recovered:
actual yield = 710 g CH4
So, the percent yield is:
percent yield = (710 g CH4 / 1669.9 g CH4) × 100%
percent yield = 42.5%
Therefore, the percent yield of the reaction is 42.5%.
learn more about electrolysis here:brainly.com/question/16763470
#SPJ4
If 540 and forty wheels are delivered on Monday morning, how many handlebars would be need to manufacture all those tricycles?
540 handlebars
180 handlebars
270 handlebars
1,620 handlebars
Answer:
540
one for every tricyclePlease answer briefly
Answer:
Explanation:
a
what is the concentration (in m) of ions, in a solution of 0.584 moles of cacl2 dissolved in enough water to make 4.76 l of the solution?
Answer:
Explanation:
Calcium chloride (CaCl2) dissociates into three ions in water: one Ca2+ ion and two Cl- ions.
To find the concentration of ions in the solution, we need to find the total number of moles of ions that result from dissolving 0.584 moles of CaCl2:
One mole of CaCl2 produces one mole of Ca2+ ions and two moles of Cl- ions.
Therefore, 0.584 moles of CaCl2 produces 0.584 moles of Ca2+ ions and 2 x 0.584 = 1.168 moles of Cl- ions.
Next, we need to find the total volume of the solution:
The solution is made by dissolving the CaCl2 in enough water to make 4.76 L of solution.
Therefore, the volume of the solution is 4.76 L.
Finally, we can calculate the concentration of each ion:
Concentration of Ca2+ ions: moles of Ca2+ ions / volume of solution = 0.584 mol / 4.76 L = 0.122 M
Concentration of Cl- ions: moles of Cl- ions / volume of solution = 1.168 mol / 4.76 L = 0.245 M
So the concentration of Ca2+ ions is 0.122 M and the concentration of Cl- ions is 0.245 M.
The concentration (in m) of ions, in a solution of 0.584 moles of CaCl2 dissolved in enough water to make 4.76 L of the solution is 0.245 M.
What is concentration?
Concentration refers to the amount of a substance that is dissolved in a specific quantity of solvent or solution. It is typically measured in units of moles per liter (M) or milligrams per deciliter (mg/dL).
What is CaCl2?
Calcium chloride (CaCl2) is a compound of calcium and chlorine. It is a salt that is commonly used as a drying agent, because it can absorb water from the air. It is also used in food preservation, snow and ice removal, and concrete mixing.
How to find the concentration of CaCl2 ions?
The molar mass of CaCl2 is 111 g/mol.
Number of moles of CaCl2 = mass/molar mass= 0.584 moles
Volume of the solution = 4.76 L.
The concentration of CaCl2 ions can be calculated as follows:
Concentration of CaCl2 = Number of moles of CaCl2/Volume of the solution= 0.584 moles/4.76 L= 0.1227 M
The concentration of ions, on the other hand, is calculated as twice the concentration of CaCl2 because the compound dissociates into two ions: Ca2+ and 2Cl-.
Therefore, the concentration of ions = 2 × 0.1227 M= 0.245 M.
Therefore, the concentration (in m) of ions, in a solution of 0.584 moles of CaCl2 dissolved in enough water to make 4.76 L of the solution is 0.245 M.
To know more about concentration click here:
brainly.com/question/30862330
#SPJ11
PLEASE HELP!!! 4. If excess nitric acid acid reacts with 25.4 g of lithium bromide, how many
grams of hydrobromic acid are produced?
HNO3(aq) + LiBr(a) → LINO3(aq) + HBr(ag)
The correct answer is To determine how many grams of hydrobromic acid (HBr) are produced when excess nitric acid[tex](HNO3)[/tex]reacts with 25.4 g of lithium bromide[tex](LiBr)[/tex], we need to use stoichiometry and the balanced chemical equation provided.
The balanced chemical equation is [tex]HNO3(aq) + LiBr(aq) → LiNO3(aq) + HBr(aq)[/tex]From the equation, we can see that one mole of HNO3 reacts with one mole of LiBr to produce one mole of HBr. Therefore, we need to first determine the number of moles of LiBr used in the reaction. To do this, we can use the molar mass of LiBr to convert the given mass of 25.4 g to moles: [tex]25.4 g LiBr x (1 mole LiBr / 86.85 g LiBr) = 0.292 moles LiBr[/tex]Since the reaction uses 1 mole of LiBr, we know that 0.292 moles of HBr will be produced. To determine the mass of HBr produced, we can use the molar mass of HBr: [tex]0.292 moles HBr x (80.91 g HBr / 1 mole HBr) = 23.6 g HBr[/tex] Therefore, when excess nitric acid reacts with 25.4 g of lithium bromide, 23.6 g of hydrobromic acid are produced. It's important to note that the word "excess" indicates that there is more than enough nitric acid to react with all of the lithium bromide, which means that the reaction will go to completion and all of the LiBr will be consumed. If the nitric acid were limiting, then we would need to calculate the amount of HBr produced based on the limiting reactant.
To learn more about stoichiometry click on the link below:
brainly.com/question/30215297
#SPJ1
what is the percent yield of the given reaction if 40. g magnesium reacts with excess nitric acid to produce 1.7 g hydrogen gas? mg 2hno3⟶mg(no3)2 h2
The percent yield of the given reaction is 71.11%.
Given, Magnesium (Mg) reacts with excess nitric acid (HNO3) to produce Magnesium nitrate (Mg(NO3)2) and hydrogen gas (H2).
[tex]Mg + 2HNO3 → Mg(NO3)2 + H2[/tex]
Molar mass of Mg = 24.31 g/mol
Molar mass of HNO3 = 63.01 g/mol
Molar mass of Mg(NO3)2 = 148.31 g/mol
Molar mass of H2 = 2 g/mol
The balanced chemical equation shows that 1 mol of Mg produces 1 mol of H2 gas.
So, the amount of hydrogen gas produced = 1.7 g
Moles of Mg reacted = mass/Mr = 40/24.31 = 1.65 moles
From the stoichiometric coefficients of the balanced chemical equation, 1 mole of Mg yields 1 mole of H2.
So, moles of H2 expected = 1.65 moles
Mass of H2 expected = 1.65 moles x 2 g/mol = 3.3 g
The percent yield of a reaction is the actual yield of the product obtained divided by the theoretical yield multiplied by 100.
So, Percent yield = (actual yield / theoretical yield) x 100Actual yield = 1.7 g
Theoretical yield = 3.3 g
Therefore, the percent yield of the given reaction is 71.11%.
To know more about percent yield refer to-
brainly.com/question/17042787#
#SPJ11
the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert independently. this law of partial pressure is referred to as
Dalton's law of partial pressure means that the total pressure of a gas mixture is equal to the sum of the individual partial pressures of each gas.
Partial pressure is defined as the pressure at which all gases would escape if the gases were in the volume of the mixture at the same temperature. The total pressure of the oil mixture is equal to a fraction of the different oil. The total pressure P (total) is the sum of all the stresses present in the reference material. Dalton's law of partial pressure states that the total pressure of a gas mixture is equal to the partial pressure of the component gas. Mathematically expression : [tex]P = \sum P_i = P_1 + P_2 + .... [/tex]
where, P --> total pressure
Pi --> partial pressures of each gas
The desired answer is therefore Dalton's partial pressure law.
For more information about Dalton's law of partial pressures, visit :
https://brainly.com/question/13082853
#SPJ4
What cellular process occurs in the uterus before differentiation?
In the uterus, the fertilised egg or zygote passes through a number of cellular processes. Cell division, in which the zygote divides multiple times to create a mass of cells known as a blastocyst, is one of the most crucial processes.
What is the embryo's first step of cellular differentiation?Identity of cells, tissues, organs, and organisms are determined by the division of cells during embryogenesis. A embryo is created after a sperm fertilises an egg. The embryonic differentiation process begins when the zygote undergoes cleavage, a division into numerous cells.
Cellular division starts at what point?When separate tissue layers first form during a process known as gastrulation in vertebrates, differentiation starts. The regulation of differentiation by genes is similar to that of most other developmental processes.
To know more about cellular processes visit:-
https://brainly.com/question/17772081
#SPJ9
click reset.this time, decrease the setting on the dial as you get close to the melting point. notice that melting occurs over a range of temperatures. can you determine the exact range of temperatures over which melting occurs? (this may take several tries, be patient.) what is thetemperaturerangeover which melting occurs?
The melting point is the temperature at which solid changes into a liquid. It is a characteristic property of a substance and can be used to identify or characterize it.
The melting point depends on the strength of the intermolecular forces between the molecules of the substance. Stronger intermolecular forces result in higher melting points.
To measure the melting point of a substance, you need to heat it gradually and monitor its temperature and physical state. You can use a device called a melting point apparatus, which consists of a heating block, a thermometer, and a capillary tube. You place a small amount of the substance in the capillary tube and insert it into the heating block. You then adjust the heating rate and observe when the substance starts to melt and when it completely melts. The temperature range over which melting occurs is called the melting point range.
The melting point range can vary depending on several factors, such as the purity of the substance, the heating rate, and the accuracy of the thermometer. A pure substance usually has a sharp melting point, meaning that it melts within a narrow temperature range (usually less than 1°C). An impure substance usually has a broad melting point, meaning that it melts over a wide temperature range (usually more than 1°C). A faster heating rate can cause the temperature to rise faster than the substance can melt, resulting in a higher apparent melting point. A slower heating rate can allow the substance to melt more evenly, resulting in a lower apparent melting point. A faulty or imprecise thermometer can also affect the accuracy of the melting point measurement.
Therefore, to determine the exact range of temperatures over which melting occurs for a given substance, you need to use a pure sample, a reliable thermometer, and an optimal heating rate. You also need to repeat the measurement several times and take an average of your results. You may also compare your results with literature values or known standards to verify your accuracy.
to know more about melting points click here:
https://brainly.com/question/40140
#SPJ4
buffer is made by combining 20.0 ml 0.250 m nh4cl with 30.0 ml 0.250 m nh3. a. calculate the ph of the buffer.
To calculate the pH of the buffer, we first need to find the concentration of NH4+ and NH3 in the solution.
The dissociation of NH4Cl in water is as follows:
NH4Cl → NH4+ + Cl-
Since NH4Cl is a strong electrolyte, it dissociates completely in water, and the concentration of NH4+ in solution is the same as the initial concentration of NH4Cl:
[ NH4+ ] = 0.250 M
The reaction between NH3 and water is as follows:
NH3 + H2O ⇌ NH4+ + OH-
The base dissociation constant for ammonia (Kb) is 1.8 x 10^-5. We can use this value to find the concentration of NH3 and OH- in the solution.
Let x be the concentration of NH3 in the solution. Then, the concentration of NH4+ will be 0.250 M - x (since NH4+ and NH3 are in equilibrium). The concentration of OH- can be calculated using the Kb value:
Kb = [ NH4+ ][ OH- ] / [ NH3 ]
1.8 x 10^-5 = (0.250 M - x) x / (0.250 M)
x = 0.0564 M (concentration of NH3)
[ OH- ] = Kb x / [ NH4+ ]
[ OH- ] = (1.8 x 10^-5) (0.0564 M) / (0.250 M - 0.0564 M)
[ OH- ] = 4.37 x 10^-6 M
Since this is a basic solution, the pH can be calculated using the pOH equation:
pOH = -log [ OH- ]
pOH = -log (4.37 x 10^-6)
pOH = 5.36
The pH can be found by subtracting the pOH from 14:
pH = 14 - pOH
pH = 14 - 5.36
pH = 8.64
Therefore, the pH of the buffer is 8.64.
To know more about buffer solution, visit the link given below:
https://brainly.com/question/24262133
#SPJ4
seawater is not simply concentrated river water. which of the following is not true select one: a. hydrothermal activity removes some ions (e.g. mg2 ) and adds some other (e.g. ca2 ) b. volcanic gases add components such as chloride (cl-) and sulfate (so42-) c. biological activity such as formation of shells removes some ions (e.g. ca2 ) d. evaporation preferentially releases ions such as na and k into the atmosphere
The statement that is not true is: d. Evaporation preferentially releases ions such as Na and K into the atmosphere. Seawater is not simply concentrated river water because it undergoes various processes that modify its composition.
Explanation: When evaporation occurs, water molecules leave the surface and enter the atmosphere, but ions like Na and K generally do not evaporate with water. Instead, these ions remain in the seawater, making it saltier.
The other three statements are true and contribute to the differences between seawater and river water:
a. Hydrothermal activity removes some ions (e.g., [tex]Mg_2^+[/tex]) and adds others (e.g., [tex]Ca_2^+[/tex]): Hydrothermal vents at the seafloor release hot fluids, which can dissolve minerals from the Earth's crust. These fluids can remove ions like [tex]Mg_2^+[/tex] from the seawater and introduce new ions, such as [tex]Ca_2^+[/tex], altering the composition of seawater.
b. Volcanic gases add components such as chloride ([tex]Cl^-[/tex]) and sulfate ([tex]SO_{4}^{2-}[/tex]): When volcanoes erupt, they release gases that can dissolve in seawater. These gases contain components like chloride and sulfate, which contribute to the salinity of seawater.
c. Biological activity such as the formation of shells removes some ions (e.g., [tex]Ca_2^+[/tex]): Marine organisms like mollusks and corals extract ions like [tex]Ca_2^+[/tex] from seawater to build their shells and skeletons. This process helps to remove these ions from the seawater, altering its composition.
for more such question on concentrated
https://brainly.com/question/9363113
#SPJ11
someone help pls simplee
The compounds are;
A - methane
B - nitrogen
C - water
What is a molecular model?A molecular model is a physical or virtual representation of a molecule, which shows the arrangement of its atoms and the nature of the chemical bonds between them.
Molecular models are used to visualize the three-dimensional structure of molecules and to understand their chemical and physical properties.
Molecular models are used in many fields of science, including chemistry, biochemistry, and materials science. They are used to study the properties and behavior of molecules in different environments and to design new molecules with specific properties for use in various applications.
Learn more about molecular models:https://brainly.com/question/30545244
#SPJ1
determine whether each melting point observation corresponds to a pure sample of a single compound or to an impure sample with multiple compounds. wide melting point range choose... narrow melting point range choose... experimental melting point is below literature value choose... experimental melting point is close to literature value
Wide melting point range: Impure sample
Narrow melting point range : Pure sample
A wide melting point range is known as the range of more than 5°C which usually indicates that the substance is impure. A narrow melting point range is known as the range of 0.5 to 2°C which usually indicates that the substance is fairly pure. It explains the impurities effect on the Melting Point. A wide melting point is used as a indicator of purity as there is a general lowering and broadening of the melting range as impurities increase.
A narrow melting point range is defined as the range which suggests a pure sample with one compound when a wide melting point range suggests an impure sample with multiple compounds. Through the wide melting point and narrow melting point range observation of a sample it can provide an indication of whether the sample is pure or impure with multiple compounds present.
To learn more about wide melting point range
https://brainly.com/question/29222755
#SPJ4
which of the following reaction types best represent the following reaction?fe subscript 2 straight o subscript 3 space (s )plus 3 space co space (g )rightwards arrow 2 space fe space (s )plus 3 space co subscript 2 space (g )
The oxidation number of iron(Fe) decreases from +3 to 0. The oxidation number of C increases from +2 to +4. Hence Fe2O3 is reduced and CO is oxidized. Hence, it is a redox reaction.
One of the reactants in a redox reaction involving two reactants will be an oxidising agent, and the other reactant will be a reducing agent. By taking electrons, the oxidising agent reduces while aiding in the oxidation of other species. By contributing electrons and undergoing oxidation, the reducing agent aids in the reduction of other species.
The species that experience a rise in oxidation state is the reducing agent in a redox reaction, while the species that experience a reduction in oxidation state is the oxidising agent. In this reaction Carbon monoxide(CO) is the reducing agent and it has reduced ferric oxide Fe2O3 which acts as an oxidizing agent.
Learn more about Redox reaction, here:
https://brainly.com/question/21851295
#SPJ4
2 NH3 + 3 CuO --> 3 Cu + N2 + 3 H2O
In the above equation how many moles of N2 can be made when 166.8 grams of CuO are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Copper
63.5
Oxygen
16
2. For the reaction C + 2H2 → CH4, how many moles of carbon are needed to make 174.6 grams of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Carbon
12
3. 3 Cu + 8HNO3 --> 3 Cu(NO3)2 + 2 NO + 4 H2O
In the above equation how many moles of water can be made when 110.2 grams of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Copper
63.5
Oxygen
16
The amount of nitrogen in moles (n) is [n=166.8.028.0] = 5.95714286 moles. every mole of CH4 is consumed results in the production of one mole of CO2. In 100 g of water, there are about eleven moles of hydrogen atoms.
when 100 moles of water are present?Under a consistent pressure of 1 atm, a mole of water heated to 100°C turns into steam. [Heat of vaporisation liquid water at 100°C= 540cal/gm] is the change in entropy.
How many mole of CH4 must be burned in order to produce 44g of CO2?Since 1 mole or methane can completely burn to make 1 mole of carbon dioxide, we may say that mole ratio of methane can fully burn to produce 44 grammes of carbon dioxide.
To know more about atoms visit:
https://brainly.com/question/30898688
#SPJ1
how is the majority of electricity generated in the area where you live? does the process involve the combustion of coal? check with your teacher if you are not sure.
The process involves burning coal is used to make nearly half of the electricity in the United States.
By burning coal in a boiler to make steam, coal-fired power plants produce electricity. Under tremendous pressure, the produced steam enters a turbine, which spins a generator to generate electricity. The steam is then cooled, dense back into the water, and got back to the kettle to begin the interaction once again.
At the moment, coal provides the majority of the world's electricity. The primary source remains for many nations.
Fossil fuel power plants generate heat by burning oil or coal, which is then used to create steam that powers turbines that generate electricity.
To learn more about coal here
https://brainly.com/question/30560160
#SPJ4
Given ΔfG (SO2(g)) = -300.4 kJ·mol-1 and ΔfG (H2O(g)) = -228.57 kJ·mol-1, calculate ΔGrxn for the reaction below at 25 °C in kJ. SO2(g) + 2 H2(g) → S(s) + 2 H2O(g)
The value of ΔGrxn for the given reaction is -156.74 kJ·mol-1 at 25 °C.
To calculate ΔGrxn for the given reaction, we can use the following equation:
ΔGrxn = ΣnΔfG(products) - ΣmΔfG(reactants)
where ΔfG is the standard molar Gibbs free energy of formation, n and m are the stoichiometric coefficients of the products and reactants respectively.
Let's start by writing the balanced chemical equation for the reaction:
[tex]SO_2(g) + 2 H_2(g)[/tex] → [tex]S(s) + 2 H_2O(g)[/tex]
Now we can use the given values of ΔfG to calculate ΔGrxn:
ΔGrxn = [ΔfG(S) + 2ΔfG([tex]H_2O[/tex])] - [ΔfG([tex]SO_2[/tex]) + 2ΔfG([tex]H_2[/tex])]
ΔGrxn = [0 + 2(-228.57 kJ·mol-1)] - [-300.4 kJ·mol-1 + 2(0)]
ΔGrxn = -457.14 kJ·mol-1 + 300.4 kJ·mol-1
ΔGrxn = -156.74 kJ·mol-1
For more question on ΔGrxn click on
https://brainly.com/question/31384759
#SPJ11
determine how the ph of the following three solutions will change when 50 ml of h 2 o is added separately to each of them. i. 50 ml of 0.02 m kcl(aq) ii. 50 ml of 0.02 m hcl(aq) iii. 50 ml of 0.02 m koh(aq) 50 ml of 0.02 m kcl(aq) 50 ml of 0.02 m hcl(aq) 50 ml of 0.02 m koh(aq) a. ph increases ph increases ph increases b. no change in ph ph increases ph decreases c. no change in ph ph decreases ph increases d. ph decreases ph increases ph decreases e. ph decreases ph decreases ph decreases
In 50 mL of 0.02 M KCl(aq) solution there is no change n pH. Option C is correct, In 50 mL of 0.02 M HCl(aq) solution Ph will increases. Option A is correct, and in 50 mL of 0.02 M KOH(aq) solution Ph will decreases. OPtion D is correct.
The pH of each solution will change differently upon addition of 50 mL of water, depending on the properties of the original solutions. Here are the changes will occur.
50 mL of 0.02 M KCl(aq); Adding water to a salt solution will not change the pH, since salts do not react with water to produce acidic or basic solutions. Therefore, the pH of the solution will remain the same.
50 mL of 0.02 M HCl(aq); Adding water to an acidic solution will dilute the acid and decrease the concentration of H+ ions, causing the pH to increase. Therefore, the pH will increase.
50 mL of 0.02 M KOH(aq); Adding water to a basic solution will dilute the base and decrease the concentration of OH- ions, causing the pH to decrease. Therefore, the pH will decrease.
Hence, C. A. D. is the correct option.
To know more about salt solution here
https://brainly.com/question/11134365
#SPJ4
when a high energy electron impact molecule m in the ionization chamber what type of species is initally produced
A radical cation is created in the ionization chamber when a high energy electron impacts molecule M.
In an ionization chamber, a high energy electron can form a variety of species, such as electrons, ions, and neutral species, when it collides with the molecule "m." Ion pairs, which are composed of a negatively charged electron and a positively charged ion (cation), are the most prevalent species (anion).
This is due to the tremendous energy of the hitting electron, which can knock an electron out of the molecule and leave a positively charged ion (cation) in its place. In order to determine the energy and intensity of the electron beam in the ionization chamber, the generated ion pair is then detected.
Instruments that measure and detect ionizing radiation are called ionization chambers. Ionizing radiation is used to produce charged particles, usually ion pairs, inside the chamber.
To know about ionization
https://brainly.com/question/1602374
#SPJ4
The complete question is
When high energy electron impacts molecule M in the ionization chamber, what type of species initially produced?
a mixture of helium and hydrogen gases contains helium at a partial pressure of 428 mm hg and hydrogen at a partial pressure of 193 mm hg. what is the mole fraction of each gas in the mixture?
6.88 moles of helium and 3.12 moles of hydrogen are present in every 10 moles of gas in the combination.
The total pressure of the gas mixture can be found by adding the partial pressures of each gas:
Total pressure = partial pressure of helium + partial pressure of hydrogen
Total pressure = 428 mmHg + 193 mmHg
Total pressure = 621 mmHg
To find the mole fraction of each gas, we need to use the following formula:
Mole fraction = moles of gas / total moles of gas
We can find the moles of each gas using the ideal gas law:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
We can assume that the volume, temperature, and gas constant are constant, so we can simplify the equation to:
n = PV / RT
For helium:
n(He) = (428 mmHg)(V) / (R)(T)
For hydrogen:
n(H₂) = (193 mmHg)(V) / (R)(T)
The total number of moles of gas in the mixture is the sum of the moles of helium and hydrogen:
n(total) = n(He) + n(H₂)
To find the mole fraction of each gas, we can substitute the expressions for n(He), n(H₂), and n(total) into the formula:
Mole fraction of helium = n(He) / n(total)
Mole fraction of hydrogen = n(H₂) / n(total)
After simplifying and substituting the expressions, we get:
Mole fraction of helium = 0.688
Mole fraction of hydrogen = 0.312
Therefore, the mole fraction of helium in the mixture is 0.688 and the mole fraction of hydrogen is 0.312. This indicates that for every 10 moles of gas in the combination, 6.88 moles are helium and 3.12 moles are hydrogen.
To know more about the Mole fraction, here
https://brainly.com/question/29808190
#SPJ4
a chemistry student weighs out of acrylic acid into a volumetric flask and dilutes to the mark with distilled water. he plans to titrate the acid with solution. calculate the volume of solution the student will
A chemistry student weighs out of acrylic acid into a volumetric flask, The weight of the acrylic acid the student weighed out, The concentration of the acrylic acid solution after dilution, The concentration of the titrant solution
To calculate the volume of the titrant solution needed for the titration, we need some additional information, such as:
1. The weight of the acrylic acid the student weighed out
2. The concentration of the acrylic acid solution after dilution
3. The concentration of the titrant solution
Once you have this information, follow these steps:
Step 1: Calculate the moles of acrylic acid in the solution.
- Moles = (weight of acrylic acid) / (molar mass of acrylic acid)
Step 2: Calculate the concentration of the diluted acrylic acid solution.
- Concentration = (moles of acrylic acid) / (total volume of the solution)
Step 3: Use the stoichiometry of the reaction between the acrylic acid and the titrant to determine the moles of titrant needed to neutralize the acid.
Step 4: Calculate the volume of the titrant solution needed for titration.
- Volume of titrant = (moles of titrant) / (concentration of titrant solution)
Remember to convert the volume of titrant to the appropriate units, such as milliliters or liters, depending on the question's requirements.
For more such questions on acrylic acid
brainly.com/question/13807060
#SPJ11
the graph below shows the titration curve that results when 100. ml of 0.0250 m acetic acid is titrated with 0.100 m naoh. what part of the curve corresponds to the optimum buffer action for the acetic acid/acetate ion pair?
The buffer region of a titration curve corresponds to the portion where there is a relatively flat or gradual slope in the curve. This occurs when there is a significant amount of both the weak acid and its conjugate base present in the solution.
Titration is a common technique used in chemistry to determine the concentration of a solution, or to find the amount of a substance in a solution. It involves adding a solution of known concentration (the titrant) to a solution of unknown concentration (the analyte) until the reaction between the two is complete. The factor at which the response is entire is referred to as the endpoint, and it is usually detected by way of using a trademark that changes shade when the response is finished.
Titration is an effective device for figuring out the concentration of a wide variety of substances, including acids, bases, and various other chemical substances. It is widely used in many areas of chemistry, including analytical, environmental, and industrial chemistry. Titration can be used to determine the concentration of a particular substance in a solution, or to determine the purity of a sample. It is an essential technique for many industries, including pharmaceuticals, food and beverage production, and water treatment.
To learn more about Titration visit here:
brainly.com/question/2728613
#SPJ4
in which pair do both compounds exhibit predominantly ionic bonding? group of answer choices naf and mgo so2 and hcl rbf and no2 kno3 and ch4 kcl and co2
The pair of compounds that exhibit predominantly ionic bonding are NaF and MgO.
NaF is composed of a metal (Na) and a non-metal (F), and MgO is composed of a metal (Mg) and a non-metal (O). In both compounds, the metal atom loses electrons to form a cation, and the non-metal atom gains electrons to form an anion. The resulting ions attract each other electrostatically to form the ionic bond.
In the other pairs of compounds listed, the bonds are not purely ionic. SO2 and HCl have covalent bonds, RbF and NO2 have polar covalent bonds, KNO3 has both ionic and covalent bonds, and KCl and CO2 have polar covalent bonds.
learn more about ionic bonding here : brainly.com/question/957239
#SPJ4
in equilibrium reactions, we can look at both the forward and the backward reactions and compare the rates to determine information about the directionality of the reaction. a. write the rate expression for both the forward and backward reactions. b. how would the system respond to increasing the concentration of co2 (aq) to reestablish equilibrium? use a kinetic argument to justify your answer. c. what will the concentrations of each species be when equilibrium is reestablished, relative to what they were in the initial equilibrium? justify your answer.
a. The rate expression for the forward and backward reaction can be written as:
[tex]rate = k_{forward} [A]^m [B]^n[/tex]
[tex]rate = k_{backward} [C]^p [D]^q[/tex]
b. If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left to consume the additional [tex]CO_2\\[/tex].
c. At equilibrium, the concentrations of [tex]CO_2(aq)[/tex], A, and B would be higher than their initial concentrations, while the concentrations of C and D would be lower than their initial concentrations.
a) [tex]rate = k_forward [A]^m [B]^n[/tex]
where [tex]k_{forward[/tex] is the rate constant for the forward reaction, [A] and [B] are the concentrations of the reactants, and m and n are the reaction orders with respect to [A] and [B], respectively.
[tex]rate = k_backward [C]^p [D]^q[/tex]
where [tex]k_{backward[/tex] is the rate constant for the backward reaction, [C] and [D] are the concentrations of the products, and p and q are the reaction orders with respect to [C] and [D], respectively.
b. If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left to consume the additional [tex]CO_2[/tex]. This can be justified by Le Chatelier's principle, which states that a system at equilibrium will respond to any stress applied to it in a way that tends to counteract the stress and reestablish equilibrium.
In this case, increasing the concentration of [tex]CO_2(aq)[/tex] would be a stress that would upset the equilibrium, and the system would respond by shifting the equilibrium to the left, where [tex]CO_2(aq)[/tex] is consumed.
c. At equilibrium, the rate of the forward reaction is equal to the rate of the backward reaction. Therefore, the concentrations of the species at equilibrium can be calculated using the equilibrium constant, [tex]K_{eq[/tex]:
[tex]K_{eq} = ([C]^p [D]^q) / ([A]^m [B]^n)[/tex]
where the brackets denote the concentration of each species. At equilibrium, [tex]K_{eq}[/tex] is a constant, which means that the ratio of the product concentrations to the reactant concentrations is constant.
If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left, which would decrease the concentrations of the products (C and D) and increase the concentrations of the reactants (A and B).
Therefore, at equilibrium, the concentrations of [tex]CO_2(aq)[/tex], A, and B would be higher than their initial concentrations, while the concentrations of C and D would be lower than their initial concentrations.
However, the exact concentrations of each species at equilibrium would depend on the values of [tex]K_{eq}[/tex] and the initial concentrations of each species.
For more question on rate expression click on
https://brainly.com/question/15154019
#SPJ11
You have a 0.05 M solution of sulfuric acid. What is the concentration in grams per liter (or dm3)?
The sulfuric acid solution has a concentration of 4.904 grams per liter (or dm3).
What is sulphuric acid?With the chemical formula H₂SO₄, sulfuric acid is a potent, colorless, odorless, and extremely corrosive mineral acid. It is also referred to as "vitriol oil." An extremely significant industrial chemical, sulfuric acid is used to make a variety of goods, including fertilizers, detergents, pigments, dyes, medicines, and explosives.
The formula below can be used to get the molar mass of sulfuric acid (H₂SO₄):
H₂SO₄'s molar mass is calculated as follows: 2 × (1.008 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 98.08 g/mol.
Hence, 98.08 g equals one mole of sulfuric acid.
We must multiply the molarity by the sulfuric acid's molar mass in order to translate the molarity (0.05 M) to grams per liter:
4.904 g/L = 0.05 mol/L x 98.08 g/mol
As a result, the sulfuric acid solution has a concentration of 4.904 grams per liter (or dm³).
To know more about sulphuric acid, visit:
brainly.com/question/12986533
#SPJ1
d
5 Aluminium and iron oxide (Fe₂O3) react together to produce aluminium oxide
(Al2O3). The equation for the reaction is:
Tran oxid
2:2
241+Fe2O3Al2O3+2Fe
Relative atomic masses (A): Al = 27,0=16, Fe=56.
Calculate the mass of iron that is produced by reacting 20 g of iron oxide with
an excess of aluminium.
Maths skills links
You may also need to convert the mass of a substance into an amount in moles
(and vice versa) when using moles to balance equations.
Aluminum and iron oxide (Fe₂O₃) react together to produce aluminum oxide, 20 g of Fe₂O3 will produce 14 g of Fe.
What is meant by oxide?Oxide is a category of chemical compound that has one or more oxygen atoms and also another element in its composition.
2Al + Fe₂O₃ -> Al₂O₃ + 2Fe
Molar mass of Fe₂O₃ is: (2 x 56) + (3 x 16) = 160 g/mol
moles of Fe2O3 = 20 g / 160 g/mol = 0.125 mol
As the reaction is carried out with an excess of Al, we can assume that all of the Fe₂O₃ is consumed and that 2 moles of Fe are produced for every mole of Fe₂O₃
moles of Fe = 2 x moles of Fe₂O₃ = 0.25 mol
Molar mass of Fe is : 56 g/mol
So the mass of Fe produced is:
mass of Fe = moles of Fe x molar mass of Fe
mass of Fe = 0.25 mol x 56 g/mol = 14 g
Therefore, 20 g of Fe₂O₃ will produce 14 g of Fe.
To know more about oxides, refer
https://brainly.com/question/30368235
#SPJ1
what is the number of formula units in a 1.86 mol sample of fecl3?
The number of formula units in a 1.86 mol sample of FeCl3 is 1.12 × 10²⁴.
Formula units are defined as the smallest repeating unit in an ionic compound.
They can be atoms, ions, or molecules depending on the type of compound. In order to find the number of formula units in a given amount of a substance, we need to use Avogadro's number, which is the number of particles in one mole of a substance (6.022 × 10²³ particles/mole).
To find the number of formula units in a 1.86 mol sample of FeCl3, we need to first determine the formula unit for FeCl3. The formula for FeCl3 is FeCl3, which means there is one iron atom and three chlorine atoms in each formula unit.
Next, we need to use Avogadro's number to convert from moles to formula units.
We can do this by multiplying the number of moles by Avogadro's number. 1.86 mol × 6.022 × 10²³ formula units/mole = 1.12 × 10²⁴ formula units.
Therefore, there are 1.12 × 10²⁴ formula units in a 1.86 mol sample of FeCl3.
To know more about FeCl3 refer to-
brainly.com/question/8203381#
#SPJ11
an unknown compound has the formula . you burn 0.2236 g of the compound and isolate 0.5459 g of and 0.2235 g of . what is the empirical formula of the
#SPJ4
Full Question
an unknown compound has the formula . you burn 0.2236 g of the compound and isolate 0.5459 g of and 0.2235 g of . what is the empirical formula of the
Write your own paragraph to reflect over the current situation of coral reefs and how these events can affect ocean health.
(If you intend to use any information from a source which you consider is of importance or can enrich or support your ideas you can use references or use citations- remember plagiarism is not acceptable)
The "rainforests of the sea," or coral reefs, are under serious threat from human activity and climate change. Overfishing, pollution, acidification of the water, and rising sea temperatures are all factors in the decline of coral reefs.
Coral reefs are important for the health of our oceans because they provide vital habitats for numerous fish species and other marine life. By absorbing wave energy, they also offer coastal security, reducing erosion and storm damage.
In addition to endangering the survival of numerous marine species, the destruction of coral reefs has serious economic repercussions for the local populations that depend on them for tourism and fishing.
Coral reef degradation is also a result of overfishing and pollution, such as nutrient runoff from farmland and sewage. Coral reef destruction threatens not only the biodiversity of our oceans but also the economies of the local communities that depend on them for tourists and fishing.
As a result, we must take action to lower our carbon emissions, enhance marine conservation efforts, and deal with the underlying reasons for the decline of coral reefs.
learn more about coral reefs here
https://brainly.com/question/10970167
#SPJ1