Guadalupe drove 45 miles in 1 1/3 hours. on average how fast did she drive per hour

The number of pupils who liked both biscuits and chocolates is 30.

The number of pupils who liked neither biscuits nor chocolates is 10.

Let's assume that the number of pupils who liked only biscuits is x, and the number of pupils who liked only chocolates is y.

According to the problem, twice as many pupils liked chocolates as those who liked biscuits. Mathematically, we can write this as:

y = 2x

Now, let's find the total number of pupils who liked at least one of the two:

Total = P(Biscuits) + P(Chocolates) - P(Biscuits and Chocolates)

Total = x + y + 30

Total = x + 2x + 30

Total = 3x + 30

We know that the total number of pupils is 130, and the number of pupils who liked neither is 10. Therefore,

Total = P(All pupils) - P(Neither)

130 = x + y + 30 + 10

130 = x + y + 40

130 - 40 = x + y

90 = x + y

We can now solve these two equations to get the values of x and y:

3x + 30 = 90

3x = 60

x = 20

y = 2x = 40

Therefore, 20 pupils liked only biscuits, 40 pupils liked only chocolates, and 30 pupils liked both biscuits and chocolates. And, 40 pupils liked exactly one of the two.

To learn more about  values here

https://brainly.com/question/30145972

#SPJ1

The value of M is a^4.

Given the information, we can express the given logarithms as follows:

1) log_a(MN) = 6
2) log_a(N/M) = 2
3) log_a(N^m) = 16

From equation (1), we can write:
MN = a^6

From equation (2), we can write:
N/M = a^2 → N = a^2 * M

Now, substitute N from equation (2) into equation (3):
log_a((a^2 * M)^m) = 16

Using the power rule of logarithms, we get:
m * log_a(a^2 * M) = 16

Since log_a(a^2 * M) = 2log_a(a) + log_a(M) = 2 + log_a(M), we have:
m * (2 + log_a(M)) = 16

We don't have enough information to determine the value of 'm', but we don't need it to find the value of 'M'.

Now, substitute N back into the equation MN = a^6:
M * a^2 * M = a^6

Divide both sides by M * a^2:
M = a^(6-2) = a^4

So, the value of M is a^4.

To learn more about logarithms, refer below:

https://brainly.com/question/30085872

#SPJ11

Answer:

option d

Step-by-step explanation:

24

pls mrk me brainliest (⁠*⁠￣⁠(⁠ｴ⁠)⁠￣⁠*⁠)

The absolute maximum of f(x) = 4x / (x² + 1) on the interval [-4,0] occurs at x = 2 and the absolute minimum occurs at x = -4.

To find the absolute extrema, we first find the critical points by setting the derivative of f(x) equal to zero:

f'(x) = (4(x² + 1) - 8x²) / (x² + 1)² = 0

Simplifying, we get:

4 - 4x² = 0

x² = 1

x = ±1

Since x = -4 and x = 0 are also endpoints of the interval, we evaluate f(x) at these five points:

f(-4) = -8/17

f(-1) = -4/5

f(0) = 0

f(1) = 4/5

f(2) = 8/5

Thus, the absolute maximum occurs at x = 2, where f(x) = 8/5, and the absolute minimum occurs at x = -4, where f(x) = -8/17.

To know more about absolute maximum, refer here:
https://brainly.com/question/29030328#
#SPJ11

The length of the component in the drawing is 2.125 centimeters.

To find the length of the component in the drawing, we convert the given length from feet to inches. Since 1 foot is equal to 12 inches, the actual length of 12.75 feet is equivalent to 12.75 x 12 = 153 inches.

Next, we apply the scale of the drawing, which is 1 cm: 60 in. This means that for every 60 inches in reality, the drawing represents it as 1 centimeter. To find the length in centimeters, we set up a proportion:

1 cm / 60 in = x cm / 153 in

Cross-multiplying and solving for x, we get:

x = (1 cm * 153 in) / 60 in = 2.55 cm

Rounding to three decimal places, the length of the component in the drawing is approximately 2.125 centimeters.

Learn more about length

brainly.com/question/9842733

#SPJ11

find the position at time t = 9. a(t) = −cos ti − sin tj v(0) = j + k, r(0) = i v(t) = r(t) = r(9) = This gives you the position vector r(9) as a function of sin(9) and cos(9).

To find the velocity vector v(t) and position vector r(t), we need to integrate the given acceleration function a(t) and apply the initial conditions. Here's a step-by-step explanation:

1. Given acceleration function: a(t) = -cos(t)i - sin(t)j
2. Integrate a(t) with respect to t to find v(t):
  v(t) = ∫(-cos(t)i - sin(t)j) dt = (sin(t)i + cos(t)j) + C, where C is a constant vector.
3. Apply initial condition v(0) = j + k:
  v(0) = sin(0)i + cos(0)j + C = j + k
  C = -i + j + k
4. The velocity function is: v(t) = sin(t)i + cos(t)j - i + j + k

Now let's find the position vector r(t):

5. Integrate v(t) with respect to t to find r(t):
  r(t) = ∫(sin(t)i + cos(t)j - i + j + k) dt = (-cos(t)i + sin(t)j + t(k) + D, where D is another constant vector.
6. Apply initial condition r(0) = i:
  r(0) = -cos(0)i + sin(0)j + 0(k) + D = i
  D = i
7. The position function is: r(t) = -cos(t)i + sin(t)j + tk + i

Finally, let's find the position at time t = 9:

8. r(9) = -cos(9)i + sin(9)j + 9k + i

This gives you the position vector r(9) as a function of sin(9) and cos(9).

to learn more about velocity vectors click here:

https://brainly.com/question/28491008

#SPJ11

Answer:

Step-by-step explanation:

Total of rides from Tyler's house to Cousin's house and Cousin's house to Tyler's house = 1.8km = 1800m

So, the distance from Tyler's house to his cousin's house is

= 1800m ÷ 2 = 900m

Answer:

Step-by-step explanation:

25x3x15

The coordinates of the resulting triangle are L'(4, 1), M'(0, 1), and N'(4, 3)

From the question, we have the following parameters that can be used in our computation:

Triangle LMN has vertices at L(−1, 4), M(−1, 0), and N(−3, 4

This means that

The rotation rule of 90° clockwise around the origin is

(x,y) becomes (y,-x)

So, we have

Image = (y, -x)

Substitute the known values in the above equation, so, we have the following representation

L'(4, 1), M'(0, 1), and N'(4, 3)

Hence, the coordinates of the resulting points, are L'(4, 1), M'(0, 1), and N'(4, 3)

Read more about transformation at

brainly.com/question/27224272

#SPJ1

Answer:L′(4, 1), M′(0, 1), N′(4, 3)

Step-by-step explanation:

I am in the middle of taking the quiz and I believe this is the correct answer!

Answer:

100

Step-by-step explanation:

i think this is right

The expression 8(4 - π) yd² is the area of the of the shaded region in terms of π.

The area of the shaded region is the area of the semicircle subtracted from the area of the rectangle

radius of the semicircle is also the width of the rectangle, so;

area of the rectangle = 8 yd × 4 yd = 32 yd²

area of the semicircle = (π × 4 yd × 4 yd)/2

area of the semicircle = 8π yd²

area of the shaded region = 32 yd² - 8π yd²

area of the shaded region = 8(4 - π) yd²

Therefore, the expression 8(4 - π) yd² is the area of the of the shaded region in terms of π.

Read more about area here:https://brainly.com/question/2607596

#SPJ1

The transformation of the triangle is reflection over the x-axis

Given data ,

Let the transformation be represented as A

Now , the triangle is given as XYZ

where the coordinates are X ( 6 , 1 ) , Y ( 2 , 4 ) and Z ( -2 , 0 )

Now , the coordinates of the transformed triangle is

X' ( 6 , -1 ) , Y' ( 3 , -4 ) and Z' ( -2 , 0 )

The reflection of point (x, y) across the x-axis is (x, -y)

Hence , the transformation is reflection over x-axis

To learn more about reflection click :

https://brainly.com/question/4681298

#SPJ1

To find out Sally's total earnings for the week, we need to consider her base salary and the commission on her sales. Her base salary is $450, and she earns a 6.5% commission on $650 worth of merchandise.

First, let's calculate her commission:
6.5% of $650 = 0.065 * $650 = $42.25

Now, we can add her base salary to the commission:
Total earnings = Base salary + Commission
Total earnings = $450 + $42.25
Total earnings = $492.25

So, Sally would make $492.25 in a work week if she sold $650 worth of merchandise.

Learn more about salary commission: https://brainly.com/question/24825618

#SPJ11

Answer:

Let's solve this in steps:

1. Convert mixed numbers to fractions:

```

3 1/2 = 7/2

9 3/4 = 39/4

```

2. Perform the subtraction:

```

7/2 - 39/4 = -11/4

```

3. Divide by -2.5:

```

-11/4 / -2.5 = 4.4

```

Therefore, the value of the expression is **4.4**.

The annual compound rate of return on this 20-year zero coupon bond is 6%. To calculate the annual compound rate of return, we need to use the following formula:

Annual Compound Rate of Return = (Face Value / Purchase Price)^(1/Number of Years) - 1

Here, the face value of the bond is $1000, the purchase price is $500, and the bond has a term of 20 years. Substituting these values in the above formula, we get:

Annual Compound Rate of Return = (1000/500)^(1/20) - 1

Simplifying this expression, we get:

Annual Compound Rate of Return = 1.06 - 1

Annual Compound Rate of Return = 0.06 or 6%

Therefore, the annual compound rate of return on this 20-year zero coupon bond is 6%.

Learn more about compound rate

https://brainly.com/question/29344169

#SPJ4

_____________________________

_____________________________

Step-by-step explanation:

a probability is always the ratio

desired cases / totally possible cases.

we have here a total of 6 + 8 + 6 = 20 marbles.

to not pull a blue or yellow marble is in this context the same event as pulling a red marble.

so, the desired cases are 6 (red).

which we can get directly from the 6 red marbles, or by counting off the undesired cases : 20 - 8 - 6 = 6.

and the probabilty for not pulling a blue or yellow marble (or simply pulling a red marble) is

6/20 = 3/10 = 0.3

If velocity is negative,The body is moving backwards instead of forwards, so the displacement will be measured as a negative value.

An antiderivative of a velocity function can be used to find displacement of the body by integrating the velocity function over a given time interval. The result of this integration will give the total displacement of the body over that time interval.

If the velocity is negative, it means that the body is moving in the opposite direction to the positive direction of the coordinate system. This has an impact on the problem of finding displacement because the displacement will also be negative. In other words, the body is moving backwards instead of forwards, so the displacement will be measured as a negative value.

To know more about displacement, refer here:

https://brainly.com/question/11934397

#SPJ11

The p-value for a t-score of -0.92 is approximately 0.18 and since it is greater than the significant level, the null hypothesis is rejected.

The first step in testing this hypothesis is to calculate the test statistic, which in this case is a t-score. The formula for the t-score is (y - mu) / (s / sqrt(n)), where y is the sample mean, mu is the hypothesized population mean, s is the sample standard deviation, and n is the sample size.

In this case, the sample mean is 25.9, the hypothesized population mean is 26, the sample standard deviation is 7.6, and the sample size is 50. Plugging these values into the formula, we get a t-score of -0.92.

Next, we need to find the p-value associated with this t-score. We can use a t-table or a calculator to do this. Using a t-table with 49 degrees of freedom (since we have a sample size of 50 and one parameter estimated from the sample), we find that the p-value for a t-score of -0.92 is approximately 0.18.

Since the p-value is greater than the significance level of 0.05, we fail to reject the null hypothesis. In other words, we do not have substantial evidence to conclude that the population mean is less than 26. However, it is important to note that the sample mean is slightly below the hypothesized population mean, and the p-value is relatively close to the significance level. Therefore, it may be worthwhile to conduct additional studies with larger sample sizes or different populations to further investigate this question.

Know more about null hypothesis here:

https://brainly.com/question/19263925

#SPJ11

Answer: C

Step-by-step explanation: after rotating, if you split it in half horizontally, you have two cones

The three-dimensional figure formed when the triangle is rotated around the dashed line through B and C is a cone.

A cone is a three-dimensional geometric form with a flat base and a smooth, tapering apex or vertex. A cone is made up of a collection of line segments, half-lines, or lines that link the base's points to the apex, which is a common point on a plane that does not include the base.

When we rotate a two-dimensional shape around an axis, we create a three-dimensional solid. This process is known as "revolution" or "rotational symmetry".

In this particular case, we have a triangle that can be rotated around the line segment that connects points B and C. If we were to rotate the triangle around this axis, we would create a three-dimensional solid. To figure out what kind of solid this is, we can think about the cross-sections that would be created if we were to slice through the solid perpendicular to the axis of rotation.

If we were to slice through the solid perpendicular to the axis of rotation, we would get a circle. This means that the solid created by rotating the triangle is a cylinder.

To learn more about the cone;

brainly.com/question/16394302

#SPJ2

2a) The equation used to answer the question is (1/Time to fill the pool) = (1/Time taken by hose) - (1/Time taken by leak).

2b) It would take 40 minutes to fill the pool with water when there is a small hole causing a leak.

To solve this, we can use the concept of rates of work.

2a) The equation we would use to answer the question is:

(1/Time to fill the pool) = (1/Time taken by hose) - (1/Time taken by leak)

2b) Let's plug in the values given in the question:

(1/Time to fill the pool) = (1/30 minutes) - (1/120 minutes)

To find the time to fill the pool, we first need to find a common denominator for the fractions. The common denominator is 120, so we can rewrite the fractions as:

(1/Time to fill the pool) = (4/120) - (1/120)

Now, add the fractions on the right side:

(1/Time to fill the pool) = (3/120)

Next, take the reciprocal of both sides to solve for the time to fill the pool:

Time to fill the pool = 120/3

Time to fill the pool = 40 minutes

So, it would take 40 minutes to fill the pool.

Learn more about Equation:

https://brainly.com/question/27887972

#SPJ11

The height of the cylindrical ornament is approximately 5.7 centimetres (option b).

To find the height of the cylindrical ornament given that 450 cubic centimetres of wood is used and the radius of the base is 5 centimetres, you can use the formula for the volume of a cylinder: V = π × radius² × height.

Step 1: Write down the given values.
Volume (V) = 450 cubic centimetres
Radius (r) = 5 centimetres

Step 2: Plug the given values into the formula.
450 = π × (5)² × height

Step 3: Solve for the height.
450 = π × 25 × height
450 = 78.54 × height

Step 4: Divide both sides by 78.54 to find the height.
height = 450 / 78.54
height ≈ 5.7 centimetres

To know more about volume of cylinder refer to

https://brainly.com/question/9554871

#SPJ11

The circumference of a circle is the distance around the edge or perimeter of the circle.

1) Radius = 5cm/2 = 2.5 cm

2) Radius = 28 mm/2 = 14 mm

3) Radius = 3 1/2 m * 1/2 = 3/4 m

4) diameter = 2 * 6cm = 12 cm

5) diameter = 2 * 2m = 4 m

6) diameter = 2 * 0.8 ft = 1.6 ft

Circumference can be calculated using the formula:

C = 2πr

7) circumference = 2πr = 2 * 3.14 * 10/2 = 31.4 in

8) circumference = 2 * 7 * 3.14 = 43.96 in

9) Circumference = 2 * 3.14 * 18/2 = 56.52 in

Learn more about circumference:https://brainly.com/question/28757341

#SPJ1

The ratio of adult to boys is 35:24

A ratio is a comparison of two or more numbers that indicates their sizes in relation to each other. For example, if the ratio of boys to girls in a class is 4:1. This means that the for every 4 boys therefore is a girl.

Represent the total number of adult, boys and girls in the club by x

This means number of boys = 4/7× x

number of adult = 5/6 × x

Therefore the ratio of adults to boys will be

5x/6 : 4x/7

= 5/6 : 4/7

multiply through by 42

= 35 : 24

therefore the ratio of adult to boys is 35: 24

learn more about ratio from

https://brainly.com/question/12024093

#SPJ1

Earl works a total of 3 days in a week. From Monday through Friday, he works in the bookstore on 1 day and in the athletic center on 2 days. On Saturday and Sunday, he cooks food on 50% of the days, which would be a total of 1 day. Therefore, he works a total of 3 days in a week.

To calculate the percentage of Monday through Friday that Earl works, we need to first calculate the total number of days in a week, which is 7. Then, we need to subtract  the weekend days, which are Saturday and Sunday, leaving us with 5 days.

Finally, we can calculate the percentage by dividing the number of days Earl works from Monday through Friday (which is 1) by the total number of weekdays (which is 5), and multiplying by 100. So, Earl works 20% of Monday through Friday.

In summary, Earl works 3 days in a week, 1 day in the bookstore and 2 days in the athletic center. He also cooks food on 1 day during the weekend. Earl works 20% of Monday through Friday.

To know more about athletic center refer here:

https://brainly.com/question/23946089#

#SPJ11

Answer:

x = 4, y = 7

Step-by-step explanation:

3y + 9 = 2y + 16

y = 7

10x - 24 = 5x - 4

5x = 20

x = 4

values of x is 4 and y is 7

Answer:

38,772.72

Step-by-step explanation:

The formula for a sphere is

V=4/3 pi r^3

=4/3 3.14 21^3

=4/3 3.14 9,261

=4/3 29,079.54

=38,772.72

[tex]\textit{volume of a sphere}\\\\ V=\cfrac{4\pi r^3}{3}~~ \begin{cases} r=radius\\[-0.5em] \hrulefill\\ r=42 \end{cases}\implies V=\cfrac{4\pi (42)^3}{3}\implies \stackrel{ using~\pi =3.14 }{V\approx 310181.76}[/tex]

Answer: To determine if the series –128 + 96 – 72 + 54 – ... is a geometric series, we need to check if the ratio between consecutive terms is constant.

Let's calculate the ratio between the second and first terms:

96 / (-128) = -3/4

Now let's calculate the ratio between the third and second terms:

-72 / 96 = -3/4

The ratio between the fourth and third terms is:

54 / (-72) = -3/4

We can see that the ratio between consecutive terms is always the same: -3/4. Therefore, the series –128 + 96 – 72 + 54 – ... is a geometric series with a common ratio of -3/4.

So the answer is r equals negative three fourths.

Step-by-step explanation:

The series provided is a geometric series because each term after the first is found by multiplying the previous term by -3/4. Therefore, the common ratio 'r' equals -3/4.

In a geometric series, each term after the first is found by multiplying the previous term by a fixed, non-zero number called the common ratio. In the series given –128 + 96 – 72 + 54 – …, the second term (96) divided by the first term (-128) equals -3/4, the third term (-72) divided by the second term (96) also equals -3/4, and so on. This constant ratio between successive terms demonstrates that this is indeed a geometric series. Therefore, the statement that proves this is a geometric series is 'r equals negative three fourths' where r represents the common ratio.

https://brainly.com/question/34429025

#SPJ6

If Mr. Vara's square pyramid post caps have a volume of 94.5 cubic centimeters, and he assumes that the height and side length are equal, then the side length of each cap should be approximately 6.04 centimeters.

Mr. Vara is designing post caps in the shape of a square pyramid for his fence. The caps are solid wood and have a volume of 94.5 cubic centimeters. To calculate the dimensions of the pyramid, we need to use the formula for the volume of a square pyramid, which is V = (1/3)bh, where b is the area of the base and h is the height of the pyramid.

Since the caps are square pyramids, the base is a square. Let's call the side length of the base s. Then the area of the base is s². We can rearrange the formula for volume to get h = (3V)/b. Plugging in the given volume of 94.5 cubic centimeters, we get:

h = (3 x 94.5) / s²
h = 283.5 / s²

We still need to find the side length s. We can use the fact that the volume of the pyramid is also equal to [tex](1/3)s^{2h[/tex]. Plugging in the volume and height from above, we get:

94.5 = (1/3)s²(283.5 / s²)
94.5 = 94.5

This equation simplifies to 1 = 1, which doesn't give us any information about s. However, we can make an assumption about the dimensions of the pyramid. Let's say that the height h is equal to the side length s. Then we can solve for s using the volume formula:

[tex]94.5 = (1/3)s^{2s[/tex]
94.5 = (1/3)s³
283.5 = s³
s = 6.04

Know more about pyramid here:

https://brainly.com/question/17615619

#SPJ11

Using the t-distribution table with a sample size of 36 and a significance level of 0.05, we find the critical t-value to be ±2.03 (with 34 degrees of freedom, which is n-1).

To explain, we use the t-distribution to find the critical values because the population standard deviation is known. Since the alternative hypothesis is two-tailed (H_A: μ ≠ 40), we need to find two critical values.

With a sample size of 36, the degrees of freedom are 34 (n-1), so we use a t-distribution table with 34 degrees of freedom and a significance level of 0.05. From the table, we find the critical t-value to be ±2.03.

Therefore, if the calculated t-value falls outside of this range, we can reject the null hypothesis H0: μ = 40 in favor of the alternative hypothesis H_A: μ ≠ 40.

Learn more about Hypothesis

brainly.com/question/31804924

#SPJ11