Answer:
the minimum acceptable price is $4
Explanation:
The computation of the minimum acceptable price is shown below:
Here the minimum acceptable price would be considered as a variable selling cost i.e. calculated below:
= Selling cost × variable percentage
= $10 × 40%
= $4
hence, the minimum acceptable price is $4
The same would be considered and relevant too
Select the examples that best demonstrate likely tasks for Health, Safety, and Environmental Management workers. Check all that apply.
Donovan inspects facilities, and enforces laws and regulations.
April drives a train safely and carefully.
Chuck collects samples of materials for analysis.
Leif repairs broken equipment in a factory.
Elise takes orders, and sells products to customers.
Shayla teaches others how to use equipment safely
Answer:
It is Donovan, Chuck, and Shayla. Or 1, 3, and 6. Or A, C, and F.
Explanation:
I just did the instruction on edge. Good luck finishing this year up :)
Answer:
136 is correct!
Explanation:
credits to the other person
Childress Company produces three products, K1, S5, and G9. Each product uses the same type of direct material. K1 uses 4.9 pounds of the material, S5 uses 2.4 pounds of the material, and G9 uses 5.4 pounds of the material. Demand for all products is strong, but only 58,400 pounds of material are available. Information about the selling price per unit and variable cost per unit of each product follows. K1 S5 G91 Selling price $ 167.40 $ 99.28 $ 210.02 Variable costs 89.00 76.00 149.00 Calculate the contribution margin per pound for each of the three products. Orders for which product should be produced and filled first, then second, and then third
Answer:
Childress Company
Orders for K1 should be filled first.
Orders for G9 should be filled second.
Orders for S5 should be filled third.
Explanation:
a) Data and Calculations:
K1 S5 G9
Direct materials per unit (pounds) 4.9 2.4 5.4
Materials available for production = 58,400
Selling price $ 167.40 $ 99.28 $ 210.02
Variable costs 89.00 76.00 149.00
Contribution margin per unit $ 78.40 $ 23.28 $ 61.02
Contribution margin per pound $16 $9.70 $11.30
Orders for K1 should be filled first
Orders for G9 should be filled second
Orders for S5 should be filled third.
b) This order filling sequence will maximize the contribution margin per pound, ensuring the highest efficient use of the limited materials available for production.
24. The following information is available for Geek Manufacturing Company. -- Direct materials price standard is $4.50 per pound. -- Direct materials quantity standard is seven pounds per finished unit. -- Budgeted production is 25,000 finished units. -- 200,000 pounds of direct materials were purchased for $925,000. -- 200,000 pounds of direct materials were used in production. -- 25,600 finished units of product were produced. What is the direct materials price variance
Answer:
Material price variance = $25,000 Unfavorable
Explanation:
A material price variance occurs where materials are purchased at a price either lower or higher than the standard price. A favorable variance is recorded where the actual total cost of materials is lower that the standard cost. While an adverse variance implies the opposite
$
200,000 pounds should have cost (200,000× $4.50)= 900,000
but did cost 925,000
Material price variance 25,000Unfavorable
Material price variance = $25,000 Unfavorable
Alejandro, Inc. received the following information from its pension plan trustee concerning the operation of the company's defined-benefit pension plan for the year ended December 31, 2016. January 1, 2019 December 31, 2019 Fair value of pension plan assets $4,200,000 $4,500,000 Projected benefit obligation 4,800,000 5,160,000 Accumulated benefit obligation 840,000 1,020,000 Accumulated OCI – (Gains / Losses) -0- (90,000) The service cost component of pension expense for 2016 is $450,000 and the amortization of prior service cost due to an increase in benefits is $60,000. The settlement rate is 10% and the expected rate of return is 10%. What is the amount of pension expense for 2016?
Answer: $570,000
Explanation:
The amount of pension expense for 2016 is calculated below:
Service cost = $450,000
Add: Interest on projected benefit obligations = 10% × 4,800,000 = $480,000
Less: Expected return on plan assets = 10% × $4,200,000 = $420,000
Add: Amortization of prior service cost = $60,000
Pension expense = $570,000
The following totals for the month of April were taken from the payroll records of Kingbird Company. Salaries $144000 FICA taxes withheld 11020 Income taxes withheld 30000 Medical insurance deductions 5400 Federal unemployment taxes 380 State unemployment taxes 2590 The journal entry to record the monthly payroll on April 30 would include a debit to Salaries and Wages Expense for $144000. debit to Salaries and Wages Expense for $97580. credit to Salaries and Wages Payable for $144000. debit to Salaries and Wages Payable for $144000.
Answer:
debit to Salaries and Wages Expense for $144000
Explanation:
Based on the information given we were told that the company salaries was the amount of $144,000 which means that The journal entry to record the monthly payroll on April 30 would include :
April 30
Debit to Salaries for $144,000
Credit Wages Expense for $144000
(To record monthly payroll)
Pinnocle Corporation has provided the following data from its activity-based costing system: Activity Cost Pool Total Cost Total Activity Assembly $ 1,533,840 77,000 machine-hours Processing orders 91,065 1,950 orders Inspection 139,788 1,980 inspection-hours The company makes 430 units of product S78N a year, requiring a total of 660 machine-hours, 50 orders, and 10 inspection-hours per year. The product's direct materials cost is $51.25 per unit and its direct labor cost is $13.06 per unit. The product sells for $124.30 per unit. According to the activity-based costing system, the product margin for product S78N is: Multiple Choice $10,313.50. $25,795.70. $11,942.50. $9,607.50.
Answer:
Product margin= $9,607.5
Explanation:
First, we need to calculate the allocation rates:
Assembly= 1,533,840 / 77,000= $19.92 per machine-hour
Processing orders= 91,065 / 1,950= $46.7 per order
Inspection= 139,788 / 1,980= $70.6 per inspection-hour
Now, we need to allocate overhead:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Assembly= 19.92*660= 13,147.2
Processing orders= 46.7*50= 2,335
Inspection= 70.6*10= 706
Total= $16,188.2
Finally, the product margin for product S78N:
Product margin= 430* (124.3 - 51.25 - 13.06) - 16,188.2
Product margin= $9,607.5
Howell Petroleum, Inc., is trying to evaluate a generation project with the following cash flows: Year Cash Flow 0 –$ 40,500,000 1 62,500,000 2 – 15,500,000
a. If the company requires a return of 11 percent on its investments, what is the NPV of the project? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) NPV $
b. Compute the IRRs for this project. (Do not round intermediate calculations and enter your answers as a percent rounded to 2 decimal places, e.g., 32.16. Enter the larger IRR in the first answer box and the smaller IRR in the second answer box. If you can only calculate one IRR, enter it in both boxes to receive partial credit. A negative answer should have a minus sign.) Internal rate of return % Internal rate of return %
Answer:
A. $3,226,158.59
B. Larger IRR 23.28%
Smaller IRR -68.95%
Explanation:
a. Calculation to determine the NPV of the project
Net Present Value (NPV) = -$40,500,000 + $62,500,000 / (1+.11) - $15,500,000 /( 1+.11)^2
Net Present Value (NPV) = -$40,500,000 + $62,500,000 / 1.11 - $15,500,000 / 1.11^2
Net Present Value (NPV) = $3,226,158.59
Therefore Net Present Value (NPV) of this project is $3,226,158.59
B. Computation for the IRRs for this project
We will be Using excel to compute the IRRs for this project
0 = -$40,500,000 + $62,500,000 / (1+.11) - $15,500,000 /( 1+.11)^2
= -$40,500,000 + $62,500,000 / 1.11 - $15,500,000 / 1.11^2
= $3,226,158.59
Using excel to calculate
A B
1 Year Cash Flow
2 0 -$40,500,000
3 1 $62,500,000
4 2 -$15,500,000
NPV $3,226,158.59
Excel formula NPV(11%,B3:B4)+B2
Larger IRR 23.28%
Excel formula IRR(B2:B4,0%)
Smaller IRR -68.95%
Therefore the IRRs for this project are :
Larger IRR 23.28%
Smaller IRR -68.95%
the burning of candle stick is a good example of ____change .(a) temporary (b) permanent (c) conditionally
Answer:
Explanation:
Option A temporary is the correct answer
Good Night, Inc., manufactures comforters. The estimated inventories on January 1 for finished goods, work in process, and materials were $51,000, $28,000, and $33,000, respectively. The desired inventories on December 31 for finished goods, work in process, and materials were $48,000, $35,000, and $29,000, respectively. Direct materials purchases were $555,000. Direct labor was $252,000 for the year. Factory overhead was $176,000. Prepare a cost of goods sold budget for Good Night, Inc.
Answer:
Good Night, Inc.
Cost of goods sold budget
Beginning Finished Goods Inventory $51,000
Add Cost of Goods Manufactured $980,000
Less Ending Finished Goods Inventory ($48,000)
Cost of goods sold $947,000
Explanation:
Step 1 : Determine the Direct Materials used in Production
Beginning Materials Inventory $33,000
Add Material Purchases $555,000
Less Ending Materials Inventory ($29,000)
Direct Materials used in Production $559,000
Step 2 : Determine the Cost of Goods Manufactured
Beginning Work In Process Inventory $28,000
Add Manufacturing Costs :
Direct Materials used $559,000
Direct labor $252,000
Factory overhead $176,000 $987,000
Less Ending Work In Process Inventory ($35,000)
Cost of Goods Manufactured $980,000
Step 3 : Prepare the Cost of goods sold budget
Beginning Finished Goods Inventory $51,000
Add Cost of Goods Manufactured $980,000
Less Ending Finished Goods Inventory ($48,000)
Cost of goods sold $947,000
Definition of businnes
Answer:
a person's regular occupation, profession, or trade.
or
the practice of making one's living by engaging in commerce.
Explanation:
Although ZipCar has some routine operating tasks, its rules and regulations are, for the most part, not strict. ZipCar's decision making does not follow a strict chain of command, and first-line customer service agents have the authority to make decisions without management approval. This information primarily indicates that ZipCar lacks ________. a organizational culture b cross-functional teams c bureaucratic characteristics d cost controls e strategic alliances
Answer: bureaucratic characteristics
Explanation:
From the information given, we can say that ZipCar lacks bureaucratic characteristics. A bureaucratic organization is an organization with several layers of systems and processes and this brings about complexity and delay in decision making as it is hierarchical.
Since ZipCar's decision making does not follow a strict chain of command, and the first-line customer service agents have the authority to make decisions without management approval, this shows that the organization lacks bureaucratic characteristics.
user add controls to a form
Answer: meeeeep
Explanation:
Manoel
Income statement under absorption costing and variable costing
The following information applies to the questions displayed below.
Cool Sky reports the following costing data on its product for its first year of operations. During this first year, the company produced 42,000 units and sold 34,000 units at a price of $140 per unit.
Manufacturing costs
Direct materials per unit $60
Direct labor per unit $22
Variable overhead per unit $8
Fixed overhead for the year $504,000
Selling and administrative costs
Variable selling and administrative cost per unit $12
Fixed selling and administrative cost per year $115,000
1a. Assume the company uses absorption costing. Determine its product cost per unit.
1b. Assume the company uses absorption costing. Prepare its income statement for the year under absorption costing.
2a. Assume the company uses variable costing. Determine its product cost per unit.
2b. Assume the company uses variable costing. Prepare its income statement for the year under variable costing.
Answer:
Results are below.
Explanation:
The absorption costing method includes all costs related to production, both fixed and variable. The unit product cost is calculated using direct material, direct labor, and total unitary manufacturing overhead.
The variable costing method incorporates all variable production costs (direct material, direct labor, and variable overhead).
1)
First, we need to calculate the unitary fixed manufacturing overhead:
Fixed unitary manufacturing overhead= 504,000 / 42,000= $12
Now, the unitary production cost under the absorption costing method:
Unitary production cost= 60 + 22 + 8 + 12= $102
Finally, the income statement:
Sales= 34,000*140= 4,760,000
COGS= 34,000*102= (3,468,000)
Gross profit= 1,292,000
Total selling and administrative cost= 115,000 + 34,000*12= (523,000)
Net operating income= 769,000
2)
Unitary production cost= 60 + 22 + 8= $90
Now, the income statement:
Sales= 4,760,000
Total variable cost= (90 + 12)*34,000= (3,468,000)
Total contribution margin= 1,292,000
Total fixed overhead= (504,000)
Total selling and administrative cost= (115,000)
Net operating income= 673,000
Gourmet Aroma Coffee House has an exclusive contract with Columbia exporters. Two brands of gourmet coffee are imported, Morning Thunder (MT) and Evening Tender (ET). The following data are provided for the current fiscal year: Budgeted Operating Results MT ET MT ET Price per pound $ 40 $ 60 $ 50 $ 56 Variable cost per pound 20 36 24 40 Sales (in pounds) 4,000 4,000 3,960 5,040 The total market was estimated to be 80,000 pounds at the time of budget. The actual total market for the year is 75,000 pounds. What is the total contribution margin sales volume variance
Answer:
$24,160 favorable
Explanation:
The computation of the total contribution margin sales volume variance is given below:
The Budgeted contribution margin per pound of MT is
= $40 - $20
= $20 per pound
Now the budgeted contribution margin per pound of ET is
= $60 - $30
= $24 per pound
MT's contribution margin sales volume variance is
= (Actual sales quantity - Budgeted sales quantity) × Budgeted contribution margin per pound
= (3960 - 4000) × $20
= $800 Unfavorable
ET's contribution margin sales volume variance is
= (Actual sales quantity - Budgeted sales quantity) × Budgeted contribution margin per pound
= (5,040 - 4000) × $24
= $24,960 favorable
Now the total contribution margin sales volume is
= $800 unfavorable + $24,960 favorable
= $24,160 favorable
Discovering the process of distribution of commonly used items is quite interesting and opens eyes to several new processes and careers! Your group will be in charge of dissecting the process of distribution related to any of the following items:
*Televisions
*Milk in Cartons
*Laundry Detergent
*Refrigerators
*Lumber
*Pineapples
*Video Games
*Watches
*Coffee
*Shoes
*Football Helmets
*Pencils
Narrow your research by selecting a brand or company that manufactures or distributes one of the products listed above. For example, not all shoes come from the same country, manufacturer, distributor, or are distributed alike. Select a brand of shoes you are familiar with and begin the search. The goal is to trace the process from production to consumer.
What is a loan forgiveness program? "
Answer:
Loan forgiveness is a program in which student loans are all or partly written down, as long as a candidate fulfills certain requirements. In nations where students must finance their education with student loans, loan forgiveness programs are designed to help make college more accessible for people who are willing to do a little bit of extra work.
The capital budgeting committee of the Caldwell Pipe Corporation is evaluating the possibility of replacing its old pipe-bending machine with a more advanced model. Information on the existing machine and the new model follows: Existing machine New machine Original cost $200,000 $400,000 Market value now 80,000 Market value in year 5 0 20,000 Annual cash operating costs 40,000 10,000 Remaining life 5 yrs 5 yrs Refer to Caldwell Pipe Corporation. If the company buys the new machine and disposes of the existing machine, corporate profit over the five-year life of the new machine will be ________ than the profit that would have been generated had the existing machine been retained for five years.
Answer:
Caldwell Pipe Corporation
If the company buys the new machine and disposes of the existing machine, corporate profit over the five-year life of the new machine will be ___$150,000_____ than the profit that would have been generated had the existing machine been retained for five years.
Explanation:
a) Data and Calculations:
Existing machine New machine
Original cost $200,000 $400,000
Market value now 80,000
Market value in year 5 0 20,000
Annual cash operating costs 40,000 10,000
Remaining life 5 yrs 5 yrs
Total cash operating costs $200,000 $50,000
Difference between the annual cash operating costs = $150,000 ($200,000 - $50,000)
b) Corporate profit is based on the difference between the net revenue and the cost of operations. With the old machine, the total cash operating costs after 5 years will be $200,000 ($40,000 * 5). On the other hand, with the new machine, the total cash operating costs after 5 years will be $50,000 ($10,000 * 5). This makes an operating cost difference of $150,000 ($200,000 - $50,000).
Sual Company purchased a tractor at a cost of $180,000. The tractor has an estimated salvage value of $20,000 and an estimated life of 8 years, or 12,000 hours of operation. The tractor was purchased on January 1, 2019 and was used 2,400 hours in 2019 and 2,200 hours in 2020. What method of depreciation will produce the maximum depreciation expense in 2020
Answer:
Double-declining balance
Explanation:
Calculation to determine What method of depreciation will produce the maximum depreciation expense in 2020
Based on the information given we would be using the Straight-Line method, Double-declining balance and Units of production to determine the method of depreciation that will produce the maximum depreciation expense in 2020
Straight-Line method =($180,000 ‒ $20,000) / 8 Straight-Line method= $20,000 per year
Double-declining balance= $180,000 × (1/8 × 2)
Double-declining balance= $45,000 for 2019
Double-declining balance= ($180,000 ‒$45,000) × 1/4
Double-declining balance= $33,750 for 2020
Units of production=($180,000 - 20,000) × (2, 200 hours / 12,000 hours)
Units of production=$160,000*0.1833333
Units of production = $29,333 for 2020
Therefore the method of depreciation that will produce the maximum depreciation expense in 2020 is DOUBLE-DECLINING METHOD.
7. The price of a movie ticket goes from $7.00 to $8.50. What should happen to the demand for these tickets?
Answer: The price increses
Explanation: Goes t0 7.00 to 8.50 increses a 1.50
The demand has went up
How would I put the reason I left my job simply and professionally if this was the reason: I left my job due to my drivers ed schedule interfering with my work schedule, I was also not able to get to and from work since my dad couldn't take me there all the time.
DeShawn wants to fill out a financial application For post secondary education. What personal Information does DeShawn Most likely need to fill Out the application?
His income
His childhood address
His extracurricular activities
His grade point average in high school.
Answer:his income
Explanation:
His income should be need to fill out the application.
The following information should be considered:
Since the person wants to fill out the financial application. So here only his income needs to fill so that his earning capacity should be known. The address, extracurricular activities, and the grade point should not be relevant in the given situation.Therefore we can conclude that His income should be need to fill out the application.
Learn more: brainly.com/question/16115373
Logistics is concerned Multiple Choice with flows of materials, finished products, and information. only with the flow of information, not the flow of materials and products. with the flow of materials to the manufacturer and with the flow of finished products to the consumer, but not with the flow of information. only with the flow of finished goods from the producer to the final consumer.
Answer:
Option A
Explanation:
Logistics is concerned with the flow of goods (raw material and finished products) to the consumer and the producer.
However, the entire process of logistics involve Flow of physical items as well as abstract items inclusive of time, information, particles, and energy
Hence, option A is correct
Sales $ 79,000 $ 65,000 $ 61,000 $ 57,000 $ 50,000 Cost of goods sold 75,900 50,100 49,800 40,200 30,000 Dollar amounts stated are in thousands. a. Compute trend percentages for the above items taken from the financial statements of Lopez Plumbing over a five-year period. Treat 2017 as the base year. b. State whether the trends are favorable or unfavorable.
Answer:
This is a two part question and the answer is given in two separate headings.
Explanation:
Trend Percentages
Year 2021 2020 2019 2018
Sales* 58% 30% 22% 14%
Cost of Goods Sold** 153% 67% 66% 34%
*Sales is calculated by dividing the difference (between current Sales and Base Sales Year) by the Base Sale Year 2017 * 100. Example for 2018 the percentage is 14% [(57,000 - 50,000) / 50,000 * 100]. The same way other years have been calculated.
**Cost of Goods Sold has been calculated by dividing the difference (between current Cost of Goods Sold and Base Year Cost of Goods Sold) by the Base Year Cost of Goods Sold 2017 * 100. Example for 2018 the percentage is 14% [(40,200 - 30,000) / 30,000 * 100]. The same way other years have been calculated.
Trends Favourable or Unfavourable
It is noted that the trend is unfavourable for the five-year period. This is because the sales have been increasing but in comparison to the Cost of Goods Sold the rise is fairly slow. As shown in the above table where sales have increased by only 58% since its inception. However, the Cost of Goods Sold has increased rapidly and by the last trending year the rise in comparison to the base year 2017 was by 153%.
Rare earth metals are used in the production of many of the personal electronic devices you use every day. Suppose there is an unexpected decrease in the price of rare earth metals. a. The decrease in price of rare earth metals will lead to negative cost-push inflation. demand-pull inflation. an increase in expected inflation. negative demand-pull inflation. b. Illustrate the effect of the decrease in the price of rare earth metals by making the appropriate adjustments to the Phillips curve.
Answer:
a. negative cost-push inflation
b. Phillips Curve will shift right
Explanation:
a. Cost push inflation occurs when the costs of inputs such as wages and material costs increases. This leads to an increase in prices because producers will have to increase prices to make a profit.
In this scenario, material prices dropped instead of increasing. A negative cost-push inflation will therefore happen.
b. This will lead to a shift right in the Phillips curve to reflect that inflation has fallen. It will increase the output gap between Potential and Actual GDP because a lower inflation means more unemployment which means the economy is shrinking.
The black dot will shift right to (0, -2)
Which of the following is the index used to measure changes in gross domestic product?
A) implicit GDP price deflator
B) producer price index (PPI)
C) wage-price spiral
D) consumer price index (CPI)
Answer:
implicit GDP price deflator.
Differential Chemical produced 14,000 gallons of Preon and 28,000 gallons of Paron. Joint costs incurred in producing the two products totaled $7,800. At the split-off point, Preon has a market value of $6.00 per gallon and Paron $2.00 per gallon. Compute the portion of the joint costs to be allocated to Preon if the value basis is used.Multiple Choice$1,560.$5,845.$2,600.$4,680.$3,120.
Answer: $4680
Explanation:
The joint cost allocated to Preon will be calculated below as:
Preon's value will be:
= 14000 × $6.00
= $84000
Paron's value will be:
= 28000 × $2.00
= $56000
Total value = Preon's value + Paron's value
= $84000 + $56000
= $140000
The joint cost allocated to Preon will be
= 7800 × 84000/140000
= $4680
What leads to excess demand?
A. More people want a good or service than producers can supply.
B. Prices for a good or service increase more than consumers are willing
to pay.
C. Sellers decrease the prices of their goods or services.
D. The supply of a good or service is equal to the amount consumers want.
Suppose you started a new all-equity financed company that is expected to generate an ROE of 15% indefinitely. The current book value per share equals $30. The required return on the stock equals 12% and you expect to grow at a constant rate of 5% forever. What is the value of the stock of the startup company
Answer:
The value of the stock at start-up = $67.5
Explanation:
According to the dividend valuation model , the current price of a stock is the present value of the expected future dividends discounted at the required rate of return
This principle can be applied as follows:
The value of stock today is the present value of the future return discounted at the required rate of return
The return can be computed as the ROE × Book value of share
Return = 15%× 30 =4.5
Price of stock today = D× (1+g)/r-g
D= current return, g- growth rate, r-required rate of return
DATA: D= 4.5, g= 5%, r= 12%
PV = 4.5× (1.05)/(0.12-0.05)
= 67.5
The value of the stock at start-up = $67.5
Direct materials purchases are estimated to be $300,000, $360,000 and $450,000 for June, July, and August, respectively. Cash payments are paid such that 60% are paid in the month incurred and 40% are paid in the following month. What are the budgeted cash payments for July and August, respectively
Answer:
$336,000 and $414,000
Explanation:
The computation of the budgeted cash payments for July and August is shown below:
For July month
= 60% of $360,000 (July) = $216,000
And,
= 40% of $300,000(June)
= $120,000
Total = $336,000
For August
= 60% of $450,000(Aug)
= $270,000
And,
= 40% of $360,000(July)
= $144,000
Total = $414,000
what is the importance of Business Development Services?
Answer:
Business development services are important because they can assist entrepreneurs to run their business more effectively and, if appropriately applied, can act as an enhancer of access to finance and as an alternative form of “collateral” in circumstances where tangible collateral may be an impediment to meeting .