Answer:
it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.
Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.
When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.
For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.
₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n
It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.
We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.
What mass of HCI is needed to
generate 45.2 g of AICI3?
2AI + 6HCI → 2AICI3 + 3H2
AICI3: 133.33 g/mol
HCI: 36.46 g/mol
[?] g AlCl3
What is the smallest measurement you can make on the meter stick using the metric scale?
The smallest measurement you can make on the meter stick using the metric scale is the millimeter.
The millimeter is the smallest measurement on the meter stick . The millimeter is the smallest reading in the meter stick. we use the meter stick to simply measure the length. The meter reading is calibrated in the centimeters in the meter scale. the least count in the meter scale is the millimeters. we can measure the things as the length of the table or the width.
Thus, the smallest measurement in the meter stick using the meter scale is the millimeters. the symbol of the millimeters is mm.
To learn more about meter stick here
https://brainly.com/question/17687457
#SPJ4
[sulfate ion] in a1.15 M potassium sulfate
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, the concentration of sulfate ion is 1.15 M.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
K₂SO₄[tex]\rightarrow[/tex]2K⁺ + SO₄²⁻
concentration of potassium sulfate=concentration of potassium ion=concentration of sulfate ion
1.15 M =concentration of potassium ion=concentration of sulfate ion
Therefore, the concentration of sulfate ion is 1.15 M.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
 (Question) How many atoms are in 3 grams of Cu?
(20 points)
3 grams of Cu = 6.022 x 10^23 atoms of copper.
Answer:
2.84 × 10^22 atoms
Explanation:
To calculate the number of atoms in 3 grams of Cu, we can use avogadro's constant where:
[tex]1 \: mole = 6.02 \times 10 {}^{23} \: atoms[/tex]
Firstly, we have to calculate the number of moles in 3 grams of Cu. The formula to calculate moles is:
[tex]moles = \frac{mass}{molar \: mass} [/tex]
the mass = 3g and the molar mass = 63.55 (this value can be found in the periodic table)
Substitute the values in formula:
[tex]moles = \frac{3}{63.55} [/tex]
[tex]moles = 0.0472[/tex]
Now use the number of moles to convert to atoms using avogadro's number, where x is the unknown number of atoms we want to find:
[tex]1 \: mole : 6.02 \times 10 {}^{23} \: atoms[/tex]
[tex]0.0472 \: moles : x \: atoms[/tex]
Cross multiply and equate to solve for x:
[tex]1 \times x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]
[tex]x = 6.02 \times 10 {}^{23} \times 0.0472[/tex]
[tex]x = 2.84 \times 10 {}^{22} \: rounded \: to \: 3sf[/tex]
Hence, there are 2.84 × 10^22 atoms in 3 grams of Cu
If you dilute 125 mL of a 2.5 M solution of Lici to 1.0 L, determine the new
concentration of the solution.
Answer:
0.31M is the new concentration of the solution
Explanation:
The solution is diluted from 125mL to 1.0L = 1000mL. The dilution is of:
1000mL / 125mL = 8 times.
That means the concentration of the diluted solution is 8 times lower than the original solution. That is:
2.5M / 8 times =
0.31M is the new concentration of the solutionIs this water or oil
Answer:
it is oil.
Explanation:
it is oil because if water was written that would be wried so I think it is oil.
How many moles in 18g of H3PO4?
Answer:
0.184 mol
Explanation:
Look up molar masses for the elements that comprise H₃PO₄:
H = 1.008 g/mol
P = 30.97 g/mol
O = 15.99 g/mol
The molar mass of H₃PO₄ is a weighted sum of these (3 hydrogen + 1 phosphorus + 4 oxygen) that comes out to about 97.99 g/mol.
Then
(18 g H₃PO₄) × (1/97.99 mol/g) ≈ 0.1837 mol
How many grams of water will you make from 7 moles of H2?
Would greatly appreciate the help
9.0 mol Na2S reacts with 8.0 mol
CuSO4 according to the equation below:
Na2S + CuSO4
→
Na2SO4 + CuS
Considering only the 8.0 mol CuSO4,
how many moles of CuS form?
? mol CuS
Round your answer to the tenths place.
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 8.0 mol of CuS form when 8.0 mol CuSO[tex]_4[/tex] reacts.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.
Na[tex]_2[/tex]S + CuSO[tex]_4[/tex]→ Na[tex]_2[/tex]SO[tex]4[/tex] + CuS
moles of Na[tex]_2[/tex]S =9.0 mol
moles of CuSO[tex]_4[/tex]=8.0 mol
Since CuSO[tex]_4[/tex] is limiting reagent
moles of CuS=8.0 mol
Therefore, 8.0 mol of CuS form when 8.0 mol CuSO[tex]_4[/tex] reacts.
To know more about mole, here:
brainly.com/question/15209553
#SPJ1
What are the things to consider before using hot and cold compress?
Answer:
Explanation:
There are several things to consider before using hot and cold compresses:
The condition being treated: Different conditions may require the use of hot or cold compresses. For example, hot compresses may be used to alleviate muscle pain, while cold compresses may be used to reduce swelling and inflammation.
The individual's sensitivity to temperature: Some people may be more sensitive to temperature changes and may need to use a compress that is not as hot or cold.
The duration of use: It is generally recommended to use hot compresses for no more than 20 minutes at a time, and cold compresses for no more than 15 minutes.
The potential for burns or frostbite: Hot compresses should not be used on skin that is broken or damaged, as they can cause burns. Cold compresses should not be applied directly to the skin for an extended period of time, as they can cause frostbite.
The individual's overall health: Individuals with certain medical conditions, such as circulation problems, should be careful when using hot and cold compresses and should consult with a healthcare professional before doing so.
What is the first thing you should do following an accident with a chemical?
Immediately rinse chemicals off with a lot of water.
Different assistance must be used because different chemical accidents might occur in various ways.
Help while inhaling a chemical:To provide the person access to fresh air, remove them from the factory or work location. Make sure your company has a plan in place for what to do if a worker becomes unconscious or is unable to move. If the person has inhaled chemicals, administer oxygen from an oxygen tank.
Help if a Chemical touch your skin:Immediately rinse chemicals off with lots of water for at least 15 minutes. The more quickly and for a longer period of time you start to pour water over the region, the more damage you will limit. Chemicals that catch fire or absorb quickly through the skin must be washed for a longer time, 30 minutes to 1 hour.
Help if chemical is in eye:Right away, rinse the eye or both eyes. Rinse for at least 15 minutes while using a lot of water. If you have an emergency eye wash, activate it while keeping your eyes open with your fingers. If you must use your hands to splash water in your eyes, keep them open while doing so. Seek assistance in keeping them open.
Help if chemical is in mouth:Look for the chemical label or any other relevant information. Typically, the label will provide information on "ingestion" in the first aid section. If the person should vomit up the chemical or not is determined there. It is crucial that you heed that counsel. If the chemical is consumed, the label can include an antidote. Give the remedy if you have it.
Learn more about ingestion visit:
brainly.com/question/23164645
#SPJ4
Select the correct answer from each drop-down menu. what are the percent compositions of vanadium and lead? a metallurgist begins with 1,250 grams of vanadinite (pb5(vo4)3cl) and ends up with 135 grams of pure vanadium and 915 grams of pure lead. the percent composition of vanadium in the ore is , and the percent composition of lead is .
The percent composition of vanadium in the ore is 1A: 10.8%, and the percent composition of lead is 2B: 73.2%.
Vanadinite (Pb₅ (VO₄)₃Cl) = 1250 grams
Pure vanadium= 135 grams
Pure lead = 915 grams
Percent composition of vanadium =?
Percent composition of lead =?
The formula to find the percent composition is as follows:
Percent composition =(substance mass in grams/ sample mass in grams) × 100
1: Now solving to find the percent composition of vanadium by putting values in the formula:
Percent composition of vanadium = (vanadium mass/sample mass) × 100
Percent composition of vanadium = (135 g/ 1250 g) × 100
Percent composition of vanadium = 10.8 %
2: Now finding the percent composition of lead by using the same formula:
Percent composition of lead = (lead mass/sample mass) × 100
Percent composition of lead = (915 g / 1,250 g) × 100
Percent composition of lead = 73.2%
"
Complete question:
What are the percent compositions of vanadium and lead?
A metallurgist begins with 1,250 grams of vanadinite (pb5(vo4)3cl) and ends up with 135 grams of pure vanadium and 915 grams of pure lead.
The percent composition of vanadium in the ore is ______ , and the percent composition of lead is ________ .
OPTIONS:
1.
A. 10.8%
B. 14.3%
C. 14.8%
D. 62.4%
2.
A. 55.6%
B. 73.2%
C. 16.0%
D. 23.8%
"
You can learn more about percent composition at
https://brainly.com/question/17021926
#SPJ4
Answer:
10.8%
73.2%
Explanation:
I just did the test and its right on plato, Have a great a day!
I need some chemistry help
Thank u
H2(g) + Cl2(g) = 2 HCl (g) AH-184.6 kJ where the mathematical notation for "is equivalent to" is. However, we also have a quantity called energy change in our thermochemical equation
What is a thermochemical equation mean?Thermochemical equations are symmetric chemical equations that take into account both the energy change and the physiological state of all products and reactants. When energy is a reactant, a reaction is endothermic; whereas, when energy is a product, a reaction is exothermic.
How is a thermochemical process expressed in writing?A balance empirical formula with its heat per reaction is known as a thermochemical equation. They appear to be equal to A+B+C+H=Xjoules. You are already proficient at creating and balancing chemical equations. Therefore, all we must do is add either H or U values.
To know more about Thermochemical equation visit:
brainly.com/question/2874342
#SPJ1
What makes a hypothesis testable?
A. It must be predictable.
O
B. It must be able to be proved right or wrong.
C. It must ask a scientific question.
OD. It must follow the scientific method.
Answer:
B
Explanation:
For a hypothesis to be testable means that it is possible to make observations If a hypothesis cannot be tested by making observations, it is not scientific.
What happens to molecules when they move faster?
When molecules move faster, they increase their kinetic energy.
What is Kinetic energy?
Kinetic energy is essentially the energy of motion. It is the type of energy that an object possesses as a result of its motion. It is commonly defined as the work required to accelerate a given mass body from rest to its stated velocity. Kinetic energy is directly related to the object's mass and the square of its velocity.
This increase in kinetic energy causes the molecules to vibrate more rapidly, resulting in an increase in temperature. As molecules move faster, they also collide with each other more frequently, leading to more chemical reactions.
To know more about kinetic energy,
https://brainly.com/question/8101588
#SPJ4
if the density of hydrogen is 0.090 g l and its rate of diffusion is 5.93 times that of chlorine, what is the density of chlorine
The density of chlorine will be 3.163 g/L.
The mass of a substance per unit of volume is its density. According to Graham's law, a gas's rate of effusion is inversely proportional to its square root density. When a material's particles are concentrated in a low area, they tend to travel to the place where the concentration is highest. When we use perfume or a scented spray in one area of the room and subsequently can smell it throughout the entire space, that is a simple illustration of this process.
rate1 = H2 = 5.93
rate2 = Cl2 = 1
The molecular weight of H2 = 2.016
The molecular weight of Cl2 = x.
By Graham's Law:
5.93 / 1 = x / 2.016
35.1649 = x / 2.016
x = 70.89 g/mol
Determine gas density by volume
70.89 g / 22.414 L = 3.163 g/L
Learn more about Density
brainly.com/question/28929608
#SPJ4
Which molecule is shown below
Answer:
A
Explanation:
You can see the top part looks kinda like methane, and the bottom part looks like hexane.
Answer:
A is correctvia A P E x
Explanation:
Acellus
A steel pipe measures
62. 95 feet. How many
kilometers is this?
? ] km
Be sure to round your answer to the
correct number of significant figures.
Length in km
Enter
The answer is 0.01918 kilometers.
To convert from feet to kilometers,
you must first convert feet to meters. To do this, multiply the number of feet by 0.3048. In this case, 62.95 feet multiplied by 0.3048 equals 19.18 meters To convert from meters to kilometers, multiply the number of meters by 0.001. 19.18 meters multiplied by 0.001 equals 0.01918 kilometers. Therefore, 62.95 feet is equal to 0.01912 kilometers.
To review the conversion steps more closely, starting with feet and ending with kilometers:
1. Feet (62.95) to meters (19.18): Multiply by 0.3048
2. Meters (19.18) to kilometers (0.01918): Multiply by 0.001 or divide by 1000.
Therefore, 62.95 feet is equal to 0.01918 kilometers.
To learn between Feet and Kilometers:
brainly.com/question/1462592
#SPJ4
What are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
The two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances are mass and volume.
What is chemical substances?Chemical substances are any material made up of atoms and molecules that have distinct chemical properties. They include elements, compounds, and mixtures of elements and compounds. Chemical substances are the building blocks of all matter, from the atoms and molecules that make up the smallest particles to the complex structures of living organisms. Chemical substances can exist in various states, such as solid, liquid, and gas, and can react with other substances to form new compounds or break down into simpler substances. Chemical substances are important in many areas of science, including chemistry, biology, geology, and physics.
To learn more about chemical substances
https://brainly.com/question/29108029
#SPJ4
what happens when stress in rock builds up inside earth
Answer:
Explanation:
Stress causes the build up of strain, which causes the deformation of rocks and the Earth's crust. Compressional stresses cause a rock to shorten. Tensional stresses cause a rock to elongate, or pull apart.
help help help help help help
Answer:
d) Hypothesis
Explanation:
I think d) Hypothesis is the correct answer for the question.
Hope it helps :)
at ph=0, the net charge on a polypeptide will be negative.
a. true
b. false
False. A polypeptide will have a negative net charge at ph=0.
A polypeptide is what?A peptide is a small, chemically bound chain of amino acids, usually between two and fifty amino acids (called peptide bonds). A polypeptide is a longer (51 or more amino acids) chain of connected amino acids. One or more polypeptides are used to create the proteins that are produced inside of cells.
What role does the polypeptide play?Polypeptides. Proteins are created by joining several amino acids together to form polypeptides. The coupling of two or so more polypeptides results in the formation of proteins, after which they are folded into the appropriate shape.
To know more about Polypeptide visit:
https://brainly.com/question/28270191
#SPJ4
the chemical name for Cu3N2 is?
A)copper(I) nitride
B)copper nitride
C)copper (II) nitride
D)copper (I) nitride
Estimate how much heat in joules is released when 25. 0 g of water (C = 4. 184 J/g°C) is cooled from 80. 0°C to 30. 0°C?
The heat in joules is released when 25. 0 g of water (C = 4. 184 J/g°C) is cooled from 80. 0°C to 30. 0°C is -5210 J
To find the amount of heat released when a substance is cooled, we can use the equation:
q = mcΔT
where q is the amount of heat (in joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in joules per gram per degree Celsius), and ΔT is the change in temperature (in degrees Celsius).
Given the information in the question, we have:
m = 25.0 g
c = 4.184 J/g°C
ΔT = 30.0°C - 80.0°C = -50.0°C
So, we can substitute these values into the equation and get:
q = (25.0 g)(4.184 J/g°C)(-50.0°C)
q = -5210 J
Therefore, the amount of heat released when 25.0 g of water is cooled from 80.0°C to 30.0°C is -5210 J.
A negative sign means the heat is absorbed during the cooling process, it is an endothermic process.
Learn more about the calculation of heat transfer here: https://brainly.com/question/10670781
#SPJ4
Frida wants to measure the volume of a stone. She starts by pouring 473 mL of water into a large measuring cup. Then she drops in the stone. Now the water measures 499 mL. What is the volume of the stone
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. the volume of the stone is 26 cm³.
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. She fills a measuring cup with 473 mL of water and drops the stone in, causing the water level to rise to 499 mL. Using the conversion factor that 1 mL = 1 cm³, the initial volume of water is 473 cm³ and the final volume of water is 499 cm³. By applying the equation [Volume of stone] + [Initial water volume] = [Final water volume],
substituting the values
⇒ xcm3 +473cm3 = 499cm3
xcm3 =499cm3 −473cm3
xcm3 =26cm cube
the volume of the stone can be determined to be 26 cm³.
Learn more about conversion factor here:
https://brainly.com/question/28366871
#SPJ4
Which type (or types) of crystalline solid is characterized by each of the following: (a) high mobility of electrons throughout the solid; (b) softness, relatively low melting point; (c) high melting point and poor electrical conductivity; (d) network of covalent bonds?
Types of crystalline solids characterized by;
(a) high mobility of electrons throughout the solid; metallic solids.
(b) softness, relatively low melting point; covalent network solid.
(c) high melting point and poor electrical conductivity; ionic solids.
(d) network of covalent bonds; molecular solids.
What are the types of crystalline solids?Crystalline solids are those that have their atoms, ions, or molecules arranged in a regular, well-defined pattern. The unit cell is the smallest repeating pattern of crystalline solids, and unit cells are similar to bricks in a wall in that they are all identical and repeating.
Ionic solids, molecular solids, network covalent solids, and metallic solids are the four types of crystalline solids. A covalent network solid is a type of solid that has a low melting point, softness, and low electrical conduction. Metal cations are surrounded by a "sea" of mobile valence electrons in metallic crystals.
Learn more on crystalline solids here: https://brainly.com/question/12759602
#SPJ1
Describe an adaptation to a plant's life cycle and explain how this adaptation helps the plant survive.
alright, sum leaves have large air pockets inside that allow the plant to absorb oxygen from the water from rain or puddles
Answer:
Plant adaptations are modifications that enable a plant species thrive in its natural habitat. Underwater aquatic plants have enormous air pockets in their leaves that allow them to collect oxygen from the water. Aquatic plants' leaves are also incredibly delicate, allowing them to move with the waves.
Please help ASAP!!!!!!!!!!!!
1) What properties of a supercritical fluid are more similar to those of a liquid than a gas?
2) What properties of a supercritical fluid are more similar to those of gas than a liquid?
3) Why does CO2 need to be a supercritical fluid for the process of decaffeination?
Which types of salts produce SO2 gas on reacting with acids?
Answer:
SO2 and SO3 are acidic oxides that react with bases in aqueous solutions to create sulfurous acid and sulfuric acid salts as these gases dissolve in water. In aqueous solution, SO2 and SO3 react with NaOH to form Na2SO3 and Na2SO4.
Explanation:
It takes a water wave 5.2 seconds to travel between two docks there are 19 m apart. An observer notices that 20 crests pass the first dock in 17 seconds.
find the wavelength of the water waves.
Answer:
152.12
Explanation:
hope it helps
Kong Mali po sorry