384.23 grams KNO₃ is equivalent to 3.8 moles of KNO₃.
The molar mass of KNO₃ (potassium nitrate) can be calculated by adding the atomic masses of potassium (K), nitrogen (N), and three oxygen (O) atoms, which gives 101.1 g/mol.
To find the mass of 3.8 moles of KNO₃, we can use the following formula:
mass = moles x molar massSubstituting the given values, we get:
mass = 3.8 mol x 101.1 g/molmass = 384.18 gTherefore, 384.18 g of KNO₃ is equivalent to 3.8 moles of KNO₃.
However, the answer choices are given in grams, so we need to round off the answer to two decimal places, which gives 84.23 g KNO₃ (rounded to two decimal places) as the correct answer.
To learn more about moles, here
https://brainly.com/question/31597231
#SPJ4
Consider the following intermediate chemical equations. 2H (g) + O2(g) â 2H, O( H (9)+F (9) ⺠2HF(g) In the final chemical equation, HF and O2 are the products that are formed through the reaction between H2O and F2. Before you can add these intermediate chemical equations, you need to alter them by multiplying the O second equation by 2 and reversing the first equation. O first equation by 2 and reversing it. O first equation by (12) and reversing the second equation. Second equation by 2 and reversing it. â
The correct set of modifications to the given chemical equations is to multiply the second equation by 2 and reverse it, option D is correct.
To obtain the final chemical equation, we need to cancel out the reactants that appear as intermediates in the two given chemical equations. In this case, we need to cancel out H₂ and F₂. The second equation shows that one H₂ molecule reacts with one F₂ molecule to produce two HF molecules. Therefore, we need two molecules of the second equation, which can be achieved by multiplying it by 2.
However, the second equation has to be reversed before multiplying it by 2. This is because, in the final chemical equation, we need to form HF and O₂ from H₂O and F₂, whereas the given second equation shows the formation of HF from H₂ and F₂, option D is correct.
To learn more about equation follow the link:
brainly.com/question/30087623
#SPJ4
The complete question is:
Consider the following intermediate chemical equations.
2H₂(g) + O₂(g) → 2H₂O(l)
H₂(g) + F₂(g) → 2HF(g)
In the final chemical equation, HF and O₂ are the products that are formed through the reaction between H₂O and F₂. Before you can add these intermediate chemical equations, you need to alter them by multiplying the:
A) second equation by 2 and reversing the first equation.
B) first equation by 2 and reversing it.
C) first equation by (1/2) and reversing the second equation.
D) second equation by 2 and reversing it.
Which of the following is a product in the chemical equation?
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
A. HCl
B. Both AlCl3 and Al are products.
C. H2
D. Al
Answer:
B
Explanation:
How many moles are in a sample having 9. 3541 x 10^13 particles?
The sample has approximately 0.000155 moles.
To determine the number of moles in a sample of a substance given the number of particles, we need to use Avogadro's number, which states that there are[tex]6.022 x 10^23[/tex] particles in one mole of a substance.
Using this conversion factor, we can calculate the number of moles in the sample as follows:
[tex]9.3541 x 10^13[/tex]particles x 1 mole / [tex]6.022 x 10^23[/tex] particles ≈ 0.000155 moles
Therefore, the sample has approximately 0.000155 moles.
It's important to note that the number of particles in a sample does not depend on the substance's molar mass or atomic weight, but rather on the number of atoms, molecules, or ions present in the sample. Knowing the number of moles in a sample can be useful in determining other properties of the substance, such as its mass or volume.
To know more about Avogadro's number refer to-
https://brainly.com/question/28812626
#SPJ11
You're given an unknown acid and told that it will donate one proton per molecule. When 1. 0 g of this acid is dissolved in water, the resulting solution requires 50. 0 ml of a 0. 25 M solution of NaOH for neutralization. What's the molecular mass of the unknown acid? Explain. (Hint: Find the moles of acid present)
The molecular mass of the unknown acid is 100 g/mol.
To find the molecular mass, first determine the moles of acid present. Since 50.0 mL of 0.25 M NaOH is required for neutralization, calculate the moles of NaOH using the formula: moles = Molarity × Volume (in L).
Moles of NaOH = 0.25 mol/L × (50.0 mL × 0.001 L/mL) = 0.0125 mol
Since the acid donates one proton per molecule, the moles of acid present equal the moles of NaOH: 0.0125 mol.
Next, find the mass of one mole of the unknown acid. You have 1.0 g of the acid, so divide the mass by the moles to get the molecular mass:
Molecular mass = Mass / Moles = 1.0 g / 0.0125 mol = 100 g/mol
To know more about molecular mass click on below link:
https://brainly.com/question/31476184#
#SPJ11
Which bonds are stronger: the bonds formed or the bonds broken?
The strength of bonds formed and broken depends on the specific chemical reaction involved. In some reactions, the bonds formed are stronger than the bonds broken, while in other reactions, the opposite is true.
When a chemical reaction is exothermic, meaning that it releases energy, the bonds formed are typically stronger than the bonds broken. This is because energy is released when the bonds are formed, indicating that they are more stable and stronger than the bonds that were broken.
On the other hand, in an endothermic reaction, meaning that it absorbs energy, the bonds broken are usually stronger than the bonds formed. This is because energy is required to break the existing bonds, indicating that they are stronger and more stable than the new bonds that are formed.
To know more about chemical reaction, refer here:
https://brainly.com/question/29762834#
#SPJ11
A neutralization reaction occurs between 150mL of a 2M sulfuric acid solution and as much potassium hydroxide as necessary.
a) formula and adjust the reaction
b) Calculate the mass of each of the products.
c) to obtain 250g of potassium sulfate, calculate the volume of 1.6M sulfuric acid solution needed.
a) The neutralization reaction between sulfuric acid and potassium hydroxide can be written as follows:
[tex]H_{2}SO_{4} + 2KOH - > K_{2}SO_{4} + 2H_{2}O[/tex]
b) Mass of [tex]K_{2}SO_{4}[/tex]= 104.6 g; mass of [tex]H_{2}O[/tex]= 5.4 g
c) Volume of 1.6 M [tex]H_{2}SO_{4}[/tex] needed to produce 250 g of [tex]K_{2}SO_{4}[/tex]= 0.896 L or 896 mL.
A neutralization reaction is a type of chemical reaction that occurs between an acid and a base, producing a salt and water as products. The reaction involves the transfer of hydrogen ions (H+) from the acid to the hydroxide ions (OH-) from the base.
The resulting salt is neutral because it is made up of cations from the base and anions from the acid. The reaction can be represented by the general equation: acid + base → salt + water.
Learn more about neutralization reaction, here:
https://brainly.com/question/23008798
#SPJ1
A 0. 225L solution of H2CO3 is neutralized by 0. 0880L of a 1. 22 M Fe(OH)3 solution. What is the concentration of the H2CO3 solution?
The concentration of the H₂CO₃ solution is 0.162 M.
To solve this problem, we can use the balanced chemical equation for the neutralization reaction between H₂CO₃ and Fe(OH)₃:
2 Fe(OH)₃ + 3 H₂CO₃ → Fe₂(CO₃)+ 6 H₂O
From the balanced equation, we can see that the mole ratio between Fe(OH)3 and H₂CO₃ is 2:3. We can use this information along with the volume and concentration of the Fe(OH)₃ solution to calculate the number of moles of H₂CO₃:
Moles of Fe(OH)₃ = volume x concentration = 0.0880 L x 1.22 M = 0.10776 moles
Moles of H₂CO₃= (2/3) x moles of Fe(OH)₃ = (2/3) x 0.10776 moles = 0.07184 moles
Now, we can calculate the concentration of the H₂CO₃ solution using the volume of the solution provided: concentration = moles / volume = 0.07184 moles / 0.225 L = 0.162 M
Therefore, the molarity of the H₂CO₃ solution has been determined to be 0.162 M.
To know more about neutralization, refer here:
https://brainly.com/question/28298470#
#SPJ11
At constant temperature and pressure, a system is most likely to undergo a reaction so that in its final state, as compared to its initial state, the system has:
A) lower energy and higher entropy
B) lower energy and lower entropy
C) higher energy and lower entropy
D) higher energy and higher entropy
In general, a system tends to favor a reaction that results in an increase in entropy, which is a measure of the number of possible arrangements of the system's particles. The answer is A) lower energy and higher entropy.
This is due to the fact that the increase in the number of particles in the system or the increase in the number of ways the particles can be arranged leads to an increase in entropy. On the other hand, a system also tends to favor a reaction that results in a decrease in energy, which is a measure of the system's ability to do work.
Therefore, when a system undergoes a reaction that decreases its energy while increasing its entropy, it is moving towards a more stable and disordered state.
This is because a lower energy state means that the system is releasing energy, while a higher entropy state means that the system is becoming more disordered and spread out. This tendency towards lower energy and higher entropy is known as the second law of thermodynamics, which governs the behavior of all physical systems.
The answer is A) lower energy and higher entropy.
To know more about entropy refer to-
https://brainly.com/question/13135498
#SPJ11
What are some things you use in your life that uses sound energy? _
Some things that you use in your life that uses sound energy are car horn honking and car door closing.
Sound is the longitudinal (compression or rarefaction) wave-based transfer of energy through materials.
When a force, such as sound or pressure, causes an item or substance to vibrate, the result is sound energy. Waves of that energy pass through the substance. We refer to the sound waves as kinetic mechanical energy.
Everyday Examples of Sound Energy
•An air conditioning fan.
•An airplane taking off.
•A ballerina dancing in toe shoes.
•A balloon popping.
•The bell dinging on a microwave.
•A boom box blaring.
•A broom swishing.
•A buzzing bee.
To know more about sound energy
https://brainly.com/question/3369385
#SPJ4
11. 2H202 (1) - 2H20 (1) + 02(g)
Drake asked Theo why the decomposition of hydrogen peroxide, H202, loses mass, especially when there are more molecules on the product side. Theo explains that it is because they decomposed the product. He says that decomposing the product destroys the original substance. To further prove his point, he explains that in nature, decomposition occurs when dead organic matter is destroyed by fungi: without this, the world would be littered with dead things. What, if anything, is wrong with this conversation of
what happened in the reaction? Justify your answer.
A few errors about hydrogen peroxide's breakdown can be found throughout the discourse. Instead of being destroyed, the product is transformed into water and oxygen.
What happens when water and oxygen are formed from hydrogen peroxide?Catalase enzymes are found in both plants and animals, and they catalyse the conversion of hydrogen peroxide into water and oxygen. Water and oxygen are naturally formed from hydrogen peroxide, although the process is extremely slow.
How can you gauge how quickly hydrogen peroxide breaks down?Time how long it takes a disc of filter paper to rise a specified distance in a test tube containing hydrogen peroxide solution as one method of determining the rate.
To know more about peroxide's visit:-
https://brainly.com/question/29102186
#SPJ1
If the concentration of Sn2 in the cathode compartment is 1. 30 M and the cell generates an emf of 0. 21 V , what is the concentration of Pb2 in the anode compartment
Concentration of Pb2+ in the anode compartment is 0.088 M
To answer this question, we'll need to use the Nernst equation, which relates the cell potential (emf) to the concentrations of the species involved in the redox reaction. The Nernst equation is:
E = E₀ - (RT/nF) * ln(Q)
Where E is the cell potential (emf, 0.21 V), E₀ is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin (assumed to be 298 K), n is the number of electrons transferred in the redox reaction (2 for Sn and Pb), F is Faraday's constant (96485 C/mol), and Q is the reaction quotient, which is the ratio of the concentrations of products to reactants.
For the Sn2+/Pb2+ system, the standard cell potential (E₀) is given by the difference in their standard reduction potentials:
E₀(Sn2+/Pb2+) = E₀(Sn2+) - E₀(Pb2+)
To solve for the concentration of Pb2+ in the anode compartment, we need to rearrange the Nernst equation to find Q:
Q = exp(nF(E - E₀)/RT)
As we are given the concentration of Sn2+ (1.30 M), and we know the stoichiometry of the redox reaction, we can express Q as:
Q = [Pb2+] / [Sn2+]
Now, we can solve for [Pb2+]:
[Pb2+] = Q * [Sn2+] = exp(nF(E - E₀)/RT) * [Sn2+]
Substituting the values into the equation above, we get:
[Pb2+]/1.30 = exp[(0.01 - 0.21) * (2 * 96485 / (8.314 * 298))]
Solving for [Pb2+], we get:
[Pb2+] = 0.088 M
Therefore, the concentration of Pb2+ in the anode compartment is 0.088 M.
Once you have the values for E₀(Sn2+) and E₀(Pb2+), you can plug them into the equation along with the given values to find the concentration of Pb2+ in the anode compartment.
To know more about Electrochemical cell:
https://brainly.com/question/25749323
#SPJ11
!!!!chem help 50 points only answer if you know how to calculate this!!!!
dalton’s law of partial pressures and the ideal gas law.
8. you add 5 grams of n2 and 20 grams of he2 into a sealed container that has a volume of 5l. the temperature of the container is 393.15k.
a. use dalton’s laws of partial pressures to explain how the n2 and he2 gasses contribute to the total pressure of the container. (3pt)
b. calculate the moles of n2 was put into the container. (0.5pt)
c. calculate the moles of he2 was put into the container. (0.5pt)
d. use the ideal gas law to calculate the partial pressure of n2 gas inside the container. (2pts)
e. use the ideal gas law to calculate the partial pressure of he2 gas inside the container. (2pts)
f. use dalton’s law of partial pressures to calculate the total pressure of gas inside the container. (1pt)
please ask if any further information is needed in order to answer these (-:
To answer the given questions, we will utilize Dalton's Law of Partial Pressures and the Ideal Gas Law. Let's go through each part step by step:
a. Dalton's Law of Partial Pressures states that in a mixture of gases, the total pressure exerted is equal to the sum of the partial pressures of each gas. In this case, we have two gases, N2 and He2, in the sealed container.
The contribution of N2 gas to the total pressure can be calculated by multiplying the mole fraction of N2 by the total pressure. Similarly, the contribution of He2 gas to the total pressure can be calculated by multiplying the mole fraction of He2 by the total pressure.
b. To calculate the moles of N2 gas, we need to use its molar mass. The molar mass of N2 is approximately 28 g/mol. We divide the mass of N2 (5 grams) by its molar mass to obtain the number of moles.
c. To calculate the moles of He2 gas, we need to use its molar mass. The molar mass of He2 is approximately 4 g/mol. We divide the mass of He2 (20 grams) by its molar mass to obtain the number of moles.
d. To calculate the partial pressure of N2 gas, we will use the Ideal Gas Law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
Rearranging the formula, we can solve for P: P = (n * R * T) / V. Plug in the values of n (moles of N2 gas), R (ideal gas constant), T (temperature in Kelvin), and V (volume) to calculate the partial pressure of N2 gas.
e. To calculate the partial pressure of He2 gas, we use the same formula as in part d, but this time we plug in the moles of He2 gas and other known values to calculate the partial pressure.
f. To calculate the total pressure of the gas inside the container, we use Dalton's Law of Partial Pressures, which states that the total pressure is the sum of the partial pressures of each gas. Add the partial pressures of N2 gas and He2 gas to obtain the total pressure.
To learn more about mass, refer below:
https://brainly.com/question/19694949
#SPJ11
The exhaust gas coming from a coal-burning furnace (flue gas) usually contains sulfur in the form of so2, and when the gas is discharged into the atmosphere (which sometimes hap- pens), the so2 can eventually react with oxygen and water to form sulfuric acid (h2so4 ), hence, acid rain. the reaction is
The reaction of sulfur dioxide (SO₂) with oxygen and water to form sulfuric acid (H₂SO₄) is responsible for acid rain. The reaction is: SO₂(g) + O₂(g) + H₂O(l) -> H₂SO₄(aq).
When flue gas from a coal-burning furnace is discharged into the atmosphere, it contains sulfur dioxide (SO₂) as one of its components. SO₂ can react with oxygen and water in the atmosphere to form sulfuric acid (H₂SO₄), which is a strong acid that can cause harm to the environment. Sulfuric acid is one of the main components of acid rain, which can damage crops, forests, and bodies of water, as well as erode buildings and other structures.
Acid rain can also be harmful to human health, as it can cause respiratory problems and other illnesses. Therefore, it is important to control the emissions of SO₂ from coal-burning furnaces and other sources to reduce the formation of sulfuric acid and the occurrence of acid rain.
To learn more about Acid rain, here
https://brainly.com/question/22143130
#SPJ4
Use S1/P1 = S2/P2 , the solubility of a gas is 2. 36 g/L at a pressure of 345 atm. What is the solubility if the pressure increases to 445 atm at the same temperature?
To calculate the solubility of a gas when the pressure increases, the ideal gas law can be used. According to the law, the solubility of a gas is inversely proportional to pressure, meaning that as the pressure increases, the solubility decreases. T
herefore, if the pressure increases from 345 atm to 445 atm, the solubility will decrease.
Using the equation S1/P1 = S2/P2, the new solubility can be calculated. The equation can be rearranged to S2 = (S1 x P2) / P1. Plugging in the given values, the new solubility at 445 atm is 1.97 g/L. This is a decrease of 0.39 g/L.
In conclusion, when the pressure of a gas increases, its solubility decreases. Using the ideal gas law, the new solubility can be calculated using the equation S2 = (S1 x P2) / P1. In this case, the solubility of a gas decreased from 2.36 g/L to 1.97 g/L when the pressure increased from 345 atm to 445 atm.
Know more about Ideal gas law here
https://brainly.com/question/28257995#
#SPJ11
AlCl3 + 3Li --> 3LiCl + Al
If you are given 8. 00 g of Li calculate the number of grams of aluminum produced
When 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.
The molar mass of lithium (Li)= 6.94 g/mol
Moles of Li = mass of Li / molar mass of Li= 8.00 g / 6.94 g/mol = 1.154 moles
Now, 3 moles of Li produce 1 mole of Al
moles of Al produced = 1.154 moles / 3 = 0.385 moles
The molar mass of aluminum (Al)= 26.98 g/mol
Mass of Al = moles of Al × molar mass of Al= 0.385 moles × 26.98 g/mol = 10.39 g
So, when 8.00 g of lithium reacts with [tex]AlCl_{3}[/tex], 10.39 g of aluminum is produced.
To know more about stoichiometric calculations visit:
https://brainly.com/question/23742235
#SPJ11
Given the reaction at equilibrium:
2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat
The rate of the forward reaction can be increased by adding more SO2 because the
A) temperature will increase
B) forward reaction is endothermic
C) reaction will shift to the left
D) number of molecular collisions between reactants will increase
The addition of more [tex]SO2[/tex] to the reaction at equilibrium, [tex]2 SO2(g) + O2(g) ↔ 2 SO3(g) + heat[/tex], will increase the rate of the forward reaction. This is because the forward reaction is an exothermic reaction, meaning it releases heat. The correct answer is option d.
According to Le Chatelier's principle, adding more [tex]SO2[/tex] will shift the equilibrium position to the right and favor the forward reaction, leading to an increase in the concentration of the products, [tex]SO3[/tex].
As the concentration of [tex]SO3[/tex] increases, the rate of the forward reaction will increase due to an increase in the number of molecular collisions between reactants. Therefore, adding more[tex]SO2[/tex] will increase the rate of the forward reaction, favoring the production of [tex]SO3[/tex].
The correct answer is option d.
To know more about Le Chatelier's principle refer to-
https://brainly.com/question/29009512
#SPJ11
I NEED HELP ON THIS ASAP!!!
Answer: I believe it's A
Source: Trust me bro
1. How many moles does 8. 19 L of gas at STP represent?
2. How many moles does 21. 7 L of gas at STP represent?
At standard temperature and pressure (STP), 1 mole of any gas occupies 22.4 L of volume. Therefore, 8.19 L of gas at STP represents 0.364 moles and 21.7 L of gas at STP represents 0.969 moles.
Moles are a unit of measurement for the amount of matter present in an object. The number of moles in an object is proportional to the amount of matter present, and it is calculated by dividing the mass of an object by its molar mass. The molar mass of a substance is its molecular mass expressed in grams.
At STP, the number of moles of a gas in a given volume can be calculated by dividing the volume of the gas (in liters) by 22.4. This is because 1 mole of any gas occupies 22.4 L of volume at STP. Therefore, by dividing the volume of the gas by 22.4, the number of moles of gas is obtained.
Know more about Molar mass here
https://brainly.com/question/22997914#
#SPJ11
How many grams of nitrogen are in 5. 6x10^23 liters of nitrous oxide at STP
There are 1.18x10²³ grams of nitrogen in 5.6x10²³ liters of nitrous oxide at STP.
To solve this problem, we need to use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP (standard temperature and pressure), P = 1 atm and T = 273.15 K.
We can rearrange the equation to solve for n:
n = PV/RT
We can then convert the number of moles to grams using the molar mass of nitrogen (N₂), which is 28.02 g/mol.
n(N₂) = n(N₂O) x 2 moles of N per mole of N₂O
n(N₂) = (PV/RT) x 2
n(N₂) = (1 atm x 5.6x10²³ L) / (0.08206 L·atm/mol·K x 273.15 K) x 2
n(N₂) = 4.22x10²¹ mol
mass(N) = n(N₂) x MM(N₂)
mass(N) = 4.22x10²¹ mol x 28.02 g/mol
mass(N) = 1.18x10²³ g
As a result, 1.18x10²³ grammes of nitrogen are present in 5.6x10²³ liters of nitrous oxide at STP.
To know more about the Nitrogen, here
https://brainly.com/question/9030814
#SPJ4
Iron (III) oxide is formed when iron combines with oxygen in the air. How many grams of Fe2O3 are formed when 1. 67x10^23 atoms of Fe reacts completely with oxygen?
Approximately 88.67 grams of [tex]Fe_2O_3[/tex] are formed when [tex]1.67*10^{23}[/tex] atoms of Fe react completely with oxygen.
The balanced chemical equation for reaction between iron and oxygen to form iron (III) oxide can be written as:
4 Fe + 3 O2 → 2 [tex]Fe_2O_3[/tex]
To find the number of moles [tex]Fe_2O_3[/tex] formed when [tex]1.67*10^{23[/tex] atoms of Fe react, we first need to convert the given number of atoms of Fe to moles:
1.67x[tex]10^{23}[/tex] atoms of Fe × (1 mol/6.022 x [tex]10^{23}[/tex] atoms) = 0.2777 mol of Fe
The number of moles of [tex]Fe_2O_3[/tex] formed :
0.2777 mol of Fe × (1 mol of [tex]Fe_2O_3[/tex]/0.5 mol of Fe) = 0.5554 mol of[tex]Fe_2O_3[/tex]
We can calculate the mass of [tex]Fe_2O_3[/tex] :
0.5554 mol of [tex]Fe_2O_3[/tex] × 159.69 g/mol = 88.67 g of [tex]Fe_2O_3[/tex]
To know more about iron (III) oxide, here
brainly.com/question/19392610
#SPJ4
(07. 05 MC)
The volume of a reaction vessel with gaseous reactants is lowered to one-fourth of its original volume. What will happen to the rate of the reaction?
It will increase because the concentration of the reactants increases.
It will decrease because the concentration of the reactants decreases.
It will increase because the gaseous particles are moved farther apart.
It will decrease because the gaseous particles are brought closer together
The rate of the reaction will increase because the concentration of the reactants increases.
When the volume of a reaction vessel with gaseous reactants is reduced to one-fourth of its original volume, the gaseous particles are brought closer together. This results in an increased concentration of the reactants, as there are more particles in a smaller space.
Higher concentrations of reactants lead to a greater likelihood of successful collisions between reactant particles, which in turn leads to an increased rate of the reaction.
So, by decreasing the volume and increasing the concentration of reactants, you effectively speed up the reaction rate.
To know more about rate of the reaction click on below link:
https://brainly.com/question/30546888#
#SPJ11
Calculate the pressure exerted by 200. g of A r in a rigid 4.50 L container at 21.0 ˚ C . Assume ideal gas behavior. Note that R = 0.08206 L ⋅ atm K ⋅ mol .
The pressure exerted by 200 g of Ar in a rigid 4.50 L container at 21.0 ˚ C would be 19.6 atm.
Ideal gas problemTo calculate the pressure exerted by the Argon gas, we can use the ideal gas law:
PV = nRT
where
P is the pressureV is the volumen is the number of molesR is the ideal gas constantT is the temperature in Kelvin.First, we need to determine the number of moles of Argon gas present:
n = mass / molar massn = 200/39.95 = 5.004 molesNext, we convert the volume and temperature:
V = 4.50 L = 0.00450 [tex]m^3[/tex]T = 21.0 ˚C + 273.15 = 294.15 KNow we can substitute the values into the ideal gas law and solve for P:
P = nRT/VP = (5.004) x (0.08206) x (294.15) / (0.00450)P = 19.6 atmIn other words, the pressure exerted by 200 g of Argon gas in a 4.50 L container at 21.0 ˚C is 19.6 atm.
More on ideal gas can be found here: https://brainly.com/question/31463642
#SPJ1
CAN someone please help me with this please?
The mass of I2 reacted is 142.2 g
The mass of PCl3 reacted is 153.4 g
What is the stoichiometry?Stoichiometry is a fundamental concept in chemistry and is used in many different areas of science and industry.
We know that;
Number of moles of the F2 produced = 21.1 g/38 g/mol
= 0.56 moles
If 1 mole of I2 produced 1 mole of F2
Then 0.56 moles of I2 reacted
Mass of the I2 reacted = 0.56 mol * 254 g/mol
= 142.2 g
Number of moles of PCl5 = 234.1 g/208 g/mol
= 1.12 moles
If the reaction is 1:1:1
Mass of the PCl3 reacted = 1.12 moles * 137 g/mol
= 153.4 g
Learn more about stoichiometry:https://brainly.com/question/30215297
#SPJ1
How many moles of SiC are produced from 9. 3 moles of C?
SiO2 + C -> SiC + CO
I'm dyslexic and I put the completely wrong formula for my previous question, please ignore it
According to the balanced chemical equation, 1 mole of SiC is produced from 1 mole of C. Therefore, the number of moles of SiC produced from 9.3 moles of C is also 9.3 moles.
The balanced chemical equation for the reaction between SiO₂ and C to produce SiC and CO is:
SiO₂ + C ⇒ SiC + CO
The stoichiometric coefficients of C and SiC are both 1. This means that for every 1 mole of C reacted, 1 mole of SiC is produced. Therefore, if we have 9.3 moles of C, we can expect to produce 9.3 moles of SiC.
It is important to note that the balanced chemical equation assumes that the reaction goes to completion, meaning that all of the reactants are consumed and converted into products. In reality, some of the reactants may not be fully consumed, leading to a lower yield of the desired product.
To learn more about moles follow the link:
brainly.com/question/31597231
#SPJ4
An HCl solution has a concentration of 0. 09714 M. Then 10. 00 mL of this solution was then diluted to 250. 00 mL in a volumetric flask. The diluted solution was then used to titrate 250. 0 mL of a saturated AgOH solution using methyl orange indicator to reach the endpoint. (1pts) 1. What is the concentration of the diluted HCl solution?
Concentration of the diluted HCl solution : 0.00389 M
To find the concentration of the diluted HCl solution, we can use the equation:
C1V1 = C2V2
Where C1 is the initial concentration of the HCl solution (0.09714 M), V1 is the initial volume of the solution (10.00 mL), C2 is the final concentration of the diluted HCl solution, and V2 is the final volume of the diluted HCl solution (250.00 mL).
Plugging in the values, we get:
(0.09714 M)(10.00 mL) = C2(250.00 mL)
Solving for C2, we get:
C2 = (0.09714 M)(10.00 mL) / (250.00 mL)
C2 = 0.00389 M
Therefore, the concentration of the diluted HCl solution is 0.00389 M.
To know more about Concentration calculations: https://brainly.com/question/29404471
#SPJ11
what does the size of kf indicate regarding the stability of transition metal complexes? group of answer choices the large values of kf indicate that transition metal complexes are often very stable. the tiny values of kf indicate that transition metal complexes are often very unstable. the kf values have nothing to do with stability.
The size of the Kf indicate regarding the stability of the transition metal complexes is the large values of the Kf indicate that transition metal complexes are often very stable.
The larger the value of the Kf of the complex ion, the more stable will be the transition metal complexes. Due to the how large formation constants are often is not uncommon to listed as the logarithms in the form of the log Kf.
The Kf values that are the very large in the magnitude for the complex ion formation that indicate that the reaction is heavily favors the products. The complex ions that are the poorly formed and this value will be the very small.
To learn more about transition metal here
https://brainly.com/question/30872927
#SPJ4
Consider these two entries from a fictional table of standard reduction potentials.
X3+ + 3e—>
X(s)
E° = -2. 43 V
Y3+ + 3e—>
Y(S)
E° = -0. 44 V
What is the standard potential of a galvanic (voltaic) cell where X is the anode and Y is the cathode?
Edell
=
V
The standard potential of the galvanic cell where X is the anode and Y is the cathode is 1.99 V.
The standard potential of a galvanic cell can be calculated by subtracting the reduction potential of the anode (X) from the reduction potential of the cathode (Y).
E°cell = E°cathode - E°anode
In this case, Y has a higher reduction potential than X, so Y will be the cathode and X will be the anode.
E°cell = E°Y - E°X
E°cell = (-0.44 V) - (-2.43 V)
E°cell = 1.99 V
To know more about the standard potential of the galvanic cell, click below.
https://brainly.com/question/28167837
#SPJ11
suppose that you are titration a solution of hydrochloric acid of unknown concentration with a standard composed of magnesium hydroxide. it takes 14.3 ml of 1.35 m magnesium hydroxide solution to titrate a 20.0 ml solution of hydrochloric acid. what is the molarity of the hydrochloric acid solution?
The molarity of the hydrochloric acid solution is 1.93 M.
In this titration, a solution of hydrochloric acid of unknown concentration is titrated with a standard solution of magnesium hydroxide. The balanced chemical equation for the reaction is:
[tex]Mg(OH)2 + 2HCl[/tex] →[tex]MgCl2 + 2H2O[/tex]
moles HCl = moles Mg(OH)2 * (2/1)
From the problem, we know that 14.3 mL of 1.35 M Mg(OH)2 is required to titrate 20.0 mL of HCl of unknown concentration.
moles Mg(OH)2 = (1.35 mol/L) * (0.0143 L) = 0.019305 mol
Finally, we can calculate the molarity of the hydrochloric acid solution:
Molarity of HCl = moles HCl / volume of HCl solution in liters
Molarity of HCl = 0.03861 mol / 0.0200 L = 1.93 M
To know more about hydrochloric acid, here
brainly.com/question/15231576
#SPJ4
Christina has three substances. Each substance is a cube with a volume of 6 milliliters. She is going to place all three substances in a tub of water and wants to know which will float. Substance A has a mass of 4 grams, substance B has a mass of 8 grams, and substance C has a mass of 10 grams. Part A Which substance will float? Part B Explain how you know which substance will float.
Christina can conclude that Substance A will float.
Part A: Substance A will float.
Part B: To determine which substance will float, we need to compare their densities with the density of water. Density is defined as mass per unit volume. We can calculate the density of each substance by dividing its mass by its volume:
Density of Substance A = 4 g / 6 mL = 0.67 g/mL
Density of Substance B = 8 g / 6 mL = 1.33 g/mL
Density of Substance C = 10 g / 6 mL = 1.67 g/mL
The density of water is approximately 1 g/mL. A substance will float if its density is less than the density of water. In this case, Substance A has the lowest density (0.67 g/mL), which is less than the density of water, so it will float. Substance B and Substance C have densities greater than the density of water, so they will sink. Therefore, Christina can conclude that Substance A will float.
To know more about density of water:
https://brainly.com/question/31237897
#SPJ11
Name 10 different pollinator plants or trees or flowers
Ten different pollinators plants or trees or flowers are Bee balm, Black-eyed Susan, Butterfly weed, Coneflower, Lavender, Milkweed, Redbud tree, Sunflower, Wild rose, and Zinnia.
What are pollinator plants?Pollinator plants are known as plants that attract and support pollinators, such as bees, butterflies, birds, and other insects or animals. The pollinators they attract help transfer pollen from one flower to another.
When pollinators tranfer pollens, they facilitate the fertilization and reproduction of flowering plants.
Find more exercises on pollinator plants;
https://brainly.com/question/21076663
#SPJ1