how many grams of CaCl2 are required to make 25mL of 1.5

Answer: A 2.1

Explanation:

Answer:

develops,blossoms are synonyms

Answer:

1) (5 moles of calcium bromide) x 2 / 1 = 10 moles

2) (2.00 moles of calcium bromide) = 2.00 moles of calcium sulfate

so (2.00) x (136.1 g/mol) = 272.2 g

3) (845 grams of calcium sulfate) /  136.14 g/mol = 6.21 moles

6.21 moles of calcium sulfate = 6.21 moles of calcium bromide

(6.21 moles of calcium bromide) x 199.89 g/mol = 1241.32 g

Answer:

C₂ = 50 mg/L

C₃ = 42.5 mg/L

Explanation:

To do this, we just need to use the following expression:

C₁V₁ = C₂V₂     (1)

Where:

C₁: Original concentration of the Iron solution (mg/L)

V₁: aliquot of the iron solution (mL or L)

C₂: Concentration of the iron after beind dilluted (mg/L)

V₂: Volume of the flask that's being used.

Using the above expression, we just solve for C₂:

C₂ = C₁V₁ / V₂   (2)

We have the required volumes, but we do not have the concentration of the iron solution (C₁). To determine this, we use the initial flask of 100 mL and the mass of the iron:

C₁ = 25 mg / 0.1 L = 250 mg/L

With this value, we can replace in (2) to get the concentration on each flask.

Flask 1:

We have an aliquot of 20 mL, and it was dilluted to 100 mL, the concentration would be:

C₂ = 250 mg/L * (20/100)

Flask 2:

We have an aliquot of 17 mL dilluted to 100 mL so:

C₃ = 250 * (17/100)

Hope this helps

The concentration of iron in mg/L in each of the two flasks is 50 mg/l and 42.5 mg/L respectively.

The initial concentration of iron in the sample is obtained as follows:

A vitamin tablet containing 25 mg of iron is dissolved in 6M HCl and then made up to 100 mL in a 100 mL volumetric flask with DI water.

Concentration of iron in the solution = 25 mg/ 100 mL

Converting to mg/L; 1 L = 1000 mL, then 100 mL = 1000 * 1 L/ 1000 mL = 0.1 L

Concentration of iron in the solution in mg/L = 25 mg / 0.1 L = 250 mg/L

Then 20 mL and 17 mL of this solution were pipetted into separate 100 mL volumetric flasks and each of these was brought up to 100 mL volume by diluting with DI water to the mark.

Using the dilution formula C₁V₁ = C₂V₂ to determine the concentration of iron in each of these flasks:

C₁ = initial concentration; V₁ = initial volume

C₂ = final concentration; V₂ = final volume

Flask 1:

C₁ = 250 mg/L, V₁ = 20 mL, C₂ = ?, V₂ = 100 mL

C₂ = C₁V₁ / V₂

C₂ = 250 * 20 / 100

C₂ = 50 mg/L

Flask 2:

C₁ = 250 mg/L, V₁ = 17 mL, C₂ = ?, V₂ = 100 mL

C₂ = C₁V₁ / V₂

C₂ = 250 * 17 / 100

C₂ = 42.5 mg/L

Therefore, the concentration of iron in mg/L in each of the two flasks is 50 mg/l and 42.5 mg/L respectively.

Learn more: https://brainly.com/question/6103588

Answer:

D

Explanation:

Silicon, element number 14 is the fourth element in the third period in the periodic table. Its electronic configuration is 1s^2 2s^2 2p^6 3s^2 3p^2.

The elemental symbol of the previous noble gas preceding the atom is replaced by the arrangement of the remaining electrons to form a noble gas configuration of an atom.

So for Silicon, we substitute [Ne] 1s^2 2s^2 2p^6 and the noble gas configuration can now be [Ne] 3s^2 3p^2.

3.2 g KClO3

Explanation:

1.1 g C12H22O11 × (1 mol C12H22O11/342.3 g C12H22O11)

= 0.0032 mol C12H22O11

0.0032 mol C12H22O11 × (8 mol KClO3/1 mol C12H22O11)

= 0.026 mol KClO3

Therefore, the minimum amount of KClO3 needed is

0.026 mol KClO3 × (122.55 g KClO3/1 mol KClO3)

= 3.2 g KClO3

The molecular weight of [tex](NH_4)_2SO_4[/tex] would be 132 g/mol.

The molecular weight, otherwise known as the molar mass of substances is the sum of the molar weights of individual atoms that make up the substance.

[tex](NH_4)_2SO_4[/tex] is made up of 2 atoms of N, 8 atoms of H, 1 atom of S, and 4 atoms of O.

Thus, the molecular weight of [tex](NH_4)_2SO_4[/tex] = (14x2) + (1x8) + 32 + (16x4)

                                                                     = 132 g/mol

In other words, the molecular weight of [tex](NH_4)_2SO_4[/tex] is 132 g/mol.

More on molecular weights can be found here: https://brainly.com/question/14507491

#SPJ1

Answer:

Just use a text book.. So that you get the concept

Hence, [tex]C_{20}H_{20}O_4[/tex] is the molecular formula of a compound's empirical formula is [tex]C_5H_5O[/tex].

The empirical formula is the chemical formula of a compound that gives the proportions (ratios) of the elements present in the compound but not the actual numbers or arrangement of atoms.

Divide the molar mass of the compound by the empirical formula mass. The result should be a whole number or very close to a whole number. Multiply all the subscripts in the empirical formula by the whole number

The molar mass of the empirical formula compound [tex]C_5H_5O[/tex] is 46.06844 g/mol.

The molecular mass of the compound is 162.2g given.

162.2g ÷ 46.06844

3.520848546 =4

[tex]C_{20}H_{20}O_4[/tex] is the molecular formula.

Learn more about the empirical formula here:

https://brainly.com/question/14044066

#SPJ2

A thorough understanding of clothing and textiles will enable one to evaluate standards and product brands intelligently. It will also help one develop the capacity to recognize fabric quality, which will help one understand the best applications for the various qualities.

Understanding why some fabrics are more durable and so more suited for particular uses comes from studying textiles. It permits one to comprehend the rationale behind why particular materials generate cool-looking clothing in addition to creating the sense of coolness when used as décor. A thorough understanding of clothing and textiles will enable one to evaluate standards and product brands intelligently.

It will also help one develop the capacity to recognize fabric quality, which will help one understand the best applications for the various qualities. Although clothes don't necessarily make a person, they certainly help to develop a positive personality and a sense of self-assurance. Housewives should therefore be familiar with clothing and textiles to obtain the best out of it.

To learn more about clothing and textile from given link

https://brainly.com/question/18411505

#SPJ1

Answer:0.226 gram

Explanation:you can get the answer in two steps calculate 3.40 . 10^22 atoms =

Answer:

4.2 × 10²² ÷ 6.022× 10²³

4.2 × 10²² equals 0.069 moles (approx)

weight of 1 mole of iron = 56g

therefore, 0.069 moles = 56 × 0.069 = 3.9 g

Sorry for lazy work.. :P

Answer: The given demonstration does not support Boyle's Law.

Explanation:

According to Boyle's law, at constant temperature the pressure of an ideal gas is inversely proportional to the volume of gas.

[tex]P \propto \frac{1}{V}[/tex]

Therefore, an increase in volume of gas will lead to a decrease in pressure and vice-versa.

Now, according to the given data of volumes there is occurring an increase on moving from final volume 1 to final volume 3. This means that pressure is decreasing.

As a result, if a balloon was squeezed or compressed then it would get smaller. But in the given demonstration pressure is not given.

Thus, we can conclude that the given demonstration does not support Boyle's Law.

Answer:

The Law of Conservation of Matter states that in a chemical reaction, matter is not created or destroyed. However, it is possible for the mass of a substance to change during a chemical reaction, as you observed.

When a substance burns, it reacts with oxygen in the air to form new compounds. For example, when wood burns, it reacts with oxygen to form water and carbon dioxide. The mass of the wood plus the mass of the oxygen is equal to the mass of the water and carbon dioxide produced.

In this case, the extra mass that you observed came from the oxygen that reacted with the wood. Oxygen has mass, and when it reacts with the wood, the mass of the resulting compounds is greater than the mass of the starting materials.

It's important to note that energy is not a form of matter, and therefore has no mass. However, energy can be converted into matter and vice versa, according to the famous equation E=mc^2, where E is energy, m is mass, and c is the speed of light. This equation demonstrates that mass and energy are fundamentally connected and can be converted into each other under certain conditions.

Explanation:

The allowed concentration of Cl in water is 250 ppm. Then the equivalent concentration in molarity is 0.007 molar.

Molarity is a common term used to express the concentration of a solution. It is the ratio of the number of moles of solute to the volume of solution in liters. Molarity is a temperature dependent measurement.

Parts per million is another term of concentration have the formula as written below:

ppm = ws/W × 10⁶

Where, ws is the weight of solute and W be the weight of solution in grams.

1 molar = 35500 ppm

therefore, 250 ppm = 250 ppm × 1M /35500 ppm  = 0.007 M.

Hence, the molarity of the salt solution will with the maximum  allowed concentration will be 0.007 M.

Find more on molarity:

https://brainly.com/question/8732513

#SPJ1

(2)(½^(15/3)) = 0.0625 (5 half-lives) 102.4 grams order

To learn more about half-life of an isotope refers to:

brainly.com/question/25917167

#SPJ1

Answer:

2.4.17892

Explanation:

34.1/816×100=4.17892

Answer:

.

Explanation:

a. 2, 2

b. 2, 2

c. 2, 3, 2

d. 1, 5, 3, 4

Just make sure there is an equal amount of each ELEMENT on each side of the reaction. Starting with, O, H, C, then other elements is a good method too

The number of moles of the ideal gas is 0.12 moles. Option A

In the context of the problem that we have here, we are looking at the ideal  gas equation. When we look at the idea gas equation, we can tell that we would have the pressure of the gas, the volume of the gas as well as the temperature of the gas in view as is the case that we have here.

Thus, the idea that we are asked to pass across in the question is that we should be able to find out the number of moles that we have in the compound that have the variables that have been listed here.

Pressure (P) =  1 atm

Volume (V) = 1 L

Temperature (T) = 1 K

Number of moles (n) = ?

Using;

PV = nRT

n = PV/RT

n = 1 * 1/0.082 * 1

n = 0.12 moles

The moles of the gas is 0.12 moles.

Learn more about ideal gas:https://brainly.com/question/28257995

#SPJ1

Answer:

2 N2O(g) + 3 O2(g) --> 4 NO2(g)

Explanation:

this is the chemical reaction balanced, if that was ur question.

Answer:

wings

Explanation:

this is an example of movement because it allows birds to fly in the air

Answer:

building amino acids in proteins

Explanation:

In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.

Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.

For the balanced equation

2C6H5CH3 + 3O2 → 7CO2 + 4H2O

We required three steps

1.) Convert mass of O2 to mol of O2

mole = mass / molar mass

2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.

3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)

= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm

= 4034.95 gm. of C6H5CH3

To know more about Toluene visit :

https://brainly.com/question/6181289

#SPJ1

Answer:

Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging.

Explanation:

Packed inside the nucleus of every human cell are nearly 6 feet of DNA, which is divided into 46 individual molecules, one for each chromosome and each about 1.5 inches long. Packing all this material into a microscopic cell nucleus is an extraordinary feat of packaging. For DNA to function, it can't be crammed into the nucleus like a ball of string. Instead, it is combined with proteins and organized into a precise, compact structure, a dense string-like fiber called chromatin.

(hope this helps can i plz have brainlist :D hehe)

Answer:

D) Ba(s) + 2 HCl(aq) → BaCl2(aq) + H2(g)

Explanation:

In a redox reaction, One atom is gaining electrons (Reduction) whereas other is loosing electrons (Oxidation). In the reactions:

A) HBr(aq) + NaOH(aq) → NaBr(aq) + H2O(l)

As sodium is always +1 and Br always -1, this is not a redox reaction.

B) NaI(aq) + AgNO3(aq) → AgI(s) + NaNO3(aq)

Sodium is always +1 and nitrate ion is -1. This is not a redox reaction

C) Pb(C2H3O2)2(aq) + 2 LiBr(aq) → PbBr2(s) + 2 LiC2H3O2(aq)

Acetate ion, C2H3O2 is -1 as Br is -1, lithium is +1 and Pb +2, This is not a redox reactoin

Barium is 0 as Ba(s) but +1 as BaCl2. Is oxidizing

Hydrogen is +1 as HCl but 0 as H2. Is reducting.

This reaction is an oxidation-reduction reaction

Answer:

1. 80.9 g of CH₃OH

2. CO

3. 5.14moles

Explanation:

The reaction is:

CO  +  2H₂  →  CH₃OH

First place, we determine the moles of each reactant.

70.8 g . 1mol/ 28g = 2.53 moles of CO

20.4 g . 1mol / 2g = 10.2 moles of H₂

There is too much hydrogen, so the limiting reactant might be the carbon monoxide.

2 moles of H₂ react to 1 mol of CO

Then, 10.2 moles of H₂ may react to (10.2 . 1) /2 = 5.1 moles

We don't have enough CO, so it's ok that CO is the limiting. (We have 2.53 moles, we need 5.1 moles)

In the other hand, hydrogen is the excess reactant.

1 mol of CO react to 2 moles of hydrogen

2.53 moles may react to (2.53 . 2) /1  =5.06 moles

We have 10.2 moles, and we need 5.06 moles. Then (10.2 - 5.06) = 5.14 moles remains after the reaction goes complete.

Now that we know the limiting reactant, we can determine the grams of produced methanol. Ratio is 1:1

1 mol of CO produces 1 mol of CH₃OH

2.53 moles of CO must produce 2.53 moles of CH₃OH

We convert moles to mass: 2.53 mol . 32 g/mol = 80.9 g

Answer:

2 NaI (aq) + Br2 (aq) → 2 NaBr (aq) + I2 (s)

This is an oxidation-reduction (redox) reaction:

2 Br0 + 2 e- → 2 Br-I

(reduction)

2 I-I - 2 e- → 2 I0

(oxidation)

Answer:

Option 2

Explanation:

Answer:

fossil fuels

Explanation:

Well I had some topics on this stuff last quarter in science and from what I can remember it should be fossil fuels I think that fossil fuels are technically renewable but they are considered non-renewable since they are either in small supplies, are hard to obtain or take a long time to form.

The mass of phosphorus in a 63 kg person would be 0.63 kg or 630 grams.

According to several research findings, the percentage of phosphorus in the human body is about 1%. This means that the weight of an average human is about 1% phosphorus.

Using the above information, the mass of phosphorus in a 63 kg person can be estimated as follows:

1/100 x 63 = 0.63 kg

Since 1 kg = 1000 grams

Thus, 0.63 kg = 0.63 x 1000

                       = 630 grams

In other words, the mass of phosphorus in a 63 kg person would be 0.63 kg or 630 grams.

More on phosphorus can be found here: https://brainly.com/question/4622631

#SPJ1