Answer:
359.3g of Na₂CO₃ are required
Explanation:
When sodium carbonate, Na₂CO₃ reacts with HCl, NaCl and H₂O are produced as follows:
Na₂CO₃ + 2HCl → 2NaCl + CO₂ + H₂O
Where 1 mole of sodium carbonate produce 2 moles of NaCl
To solve this question, we must find the moles of sodium carbonate required to produce the 6.78 moles of NaCl. With this mass and the molar mass we can find the mass of sodium carbonate as follows:
Moles Na₂CO₃:
6.78 moles NaCl * (1mol Na₂CO₃ / 2mol NaCl) = 3.39 moles Na₂CO₃
Mass Na₂CO₃ -Molar mass: 105.99g/mol:
3.39 moles Na₂CO₃ * (105.99g / mol) =
359.3g of Na₂CO₃ are required8.2 moles of ethanol is boiled, how much energy was required to do so?
AH fus=4.60 kJ/mol
AHvap=43.5 kJ/mol
Answer:
Explanation:
Understand that a substance's specific heat (C) is a property that can be used to ... Calculate the heat required to melt 25.7 g of solid methanol at its melting point. ... How many moles of NH4NO3 must be dissolved in water so that 88.0 kJ of heat ... to vaporize 54.0 g of ethanol (C2H5OH) if AHvap for ethanol = 43.5. kJ/mol?
How many moles would there be in 500,000,000,000 atoms of silver? Show your calculation
and answer in unit
Answer:
Answer: 3.01 * 10^35
Explanation:
500,000,000,000 * 6.02 * 10^23
Which of the following provides the best evidence that a chemical change is taking place? A. metal object becomes shorter when it is cooled. B. Steam rises from the surface of a liquid. C A liquid forms as a solid object melts. D. A flame burns on the surface of a solid.
Show work for all math problems. Make sure to have the correct unit and significant figures in your each answer.
Convert 2.35 atm to mmHg.
What is the pH of 4.3x10^-7 M solution of H2CO3?
A.)7
B.)4.3
C.)6.4
D.)7.6
ASAP PLS
Answer:
pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.32 ) = 6.32
Explanation:
Given 4.3 x 10⁻⁷M H₂CO₃ (Ka1 = 4.2 x 10⁻⁷ & Ka2 = 4.8 x 10⁻¹¹)
Note: The Ka2 value for the 2nd ionization step is so small (Ka2 = 4.8 x 10⁻¹¹) It will be assumed all of the hydronium ions (H⁺) come from the 1st ionization step.
1st Ionization step
H₂CO₃ ⇄ H⁺ + HCO₃⁻
C(initial) 4.3 x 10⁻⁷ 0 0
ΔC -x +x +x
C(final) 4.3 x 10⁻⁷ - x x x
Note: the 'x' value in this analysis can not be dropped as the Conc/Ka value is less than 10². In this case he C/Ka ratio* (4.3E-7/4.2E-7 ≈ 1) is far below 10².
So, one sets up the equilibrium equation to be quadric and the x-value can be determined.
Ka1 = [H⁺][HSO⁻]/[H₂SO₃] = (x)(x)/(4.3 x 10⁻ - x) = x²/(4.3 x 10⁻⁷ - x) = 4.2 x 10⁻⁷
=> x² = 4.2 x 10⁻⁷(4.3 x 10⁻⁷ - x)
=> x² + 4.2 x 10⁻⁷x - 1.8 x 10⁻¹³ = 0
a = 1, b = 4.2 x 10⁻⁷, c = - 1.8 x 10⁻¹³
x = b² ± SqrRt(b² - 4(1)(-1.8 x 10⁻¹³ / 2(1) = 4.75 x 10⁻⁷
x = [H⁺] = 4.75 x 10⁻⁷
pH = -log[H⁺] = -log(4.75 x 10⁻⁷) = -(- 6.4 ) = 6.4
______________________
* The Concentration/Ka-value is the simplification test for quadratic equations used in Equilibrium studies. If the C/Ka > 100 then one can simplify the C(final) by dropping the 'x' if used in this type analysis. However, if the C/Ka value is < 100 then the x-value must be retained and the solution is determined using the quadratic equation formula.
for ax² + bx + c = 0
x = b² ± SqrRt(b² - 4ac) / 2a
25.5g C7H11NO7S in 1.00x 10^2g H20 what is the boiling and freezing point
Explain Newton’s third law of motion.
Answer:
His third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects.
Explanation:
Number 12 (c) and (d) please help
Answer:
check below
Explanation:
c) Concentrated sulphuric acid is used a drying agent.
d) (use any one of them) Concentrated phosphoric acid, hot aluminium oxide, calcium chloride , anhydrous calcium sulphate
Answer:
12c) it is used as a drying agent
d) anhydrous calcium chloride
calcium oxide can also be used as a drying agent
Can someone please please help me please
Explanation:
there is what i got hope it helps. ❤❤❤❤❤
Scientific notation of 0.00003
0.00003 in scientific notation would be 3 × 10⁻⁵.
The scientific notation of a number is represented as a coefficient multiplied by 10 raised to an appropriate exponent. 0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].
Scientific notation is a simple and standardised approach to express extremely big or extremely small numbers. Its foundation is the idea that a number can be expressed as a coefficient times a power of 10. The exponent indicates how many places the decimal point must be moved to get the original value, while the coefficient is normally an integer between 1 and 10 (inclusive of 1 but exclusive of 10). To write 0.00003 in scientific notation, we need to move the decimal point five places to the right to make the coefficient between 1 and 10. 0.00003 can be expressed in scientific notation as [tex]3\times 10 ^{-5}[/tex].
To know more about scientific notation, here:
https://brainly.com/question/19625319
#SPJ6
What are the correct formulas and coefficients for the product of the following double-displacement reaction? K3PO4 + CaCl2 ->
Answer:
Option 2: 6KCl + Ca₃(PO₄)₂
Explanation:
K₃PO₄ + CaCl₂ → Ca₃(PO₄)₂ + KCl
Balancing the equation,
2K₃PO₄ + 3CaCl₂ → Ca₃(PO₄)₂ + 6KCl
∴ the correct formula and coefficients of the products in the equation are,
6KCl + Ca₃(PO₄)₂
What is the pH of a solution that contains [OH-]=2.60 x 10-6 M?
Answer:
Explanation:
Find the pH of a 0.0025 M HCl solution. ... The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation
What is the name
of the reigning
theory about the
origins of the
universe?
Answer:
please follow me
Explanation:
eyye6ww6yeyosuyoyo6owy
How many moles are there in 34.5g of calcium phosphate?
5. The pictures below show four kinds of seeds. Which seed has a structure that
allows it to be carried away by wind?
A Bean seed
B Watermelon seed
C Dandelion seed
D Acorn
Answer:
Dandelion seed
Explanation:
(I learnt it in camp)
Answer:
C Dandelion Seed
Explanation:
Dandelion Seed are light enough to be carried by the wind.
transpiration is the process by which ____.
Answer:
Plants add water to the atmosphere
Explanation:
HELPPPPPPPPPPPPPPPPP
The water is formed from oxygen gas and...hydrogen gas, I'm assuming? It would have been nice for the question to have been a bit more explicit (not blaming you, of course).
Assuming that's the case, our chemical reaction would be:
2H₂(g) + O₂(g) → 2H₂O(l).
We are told that 1 mol of a gas has a volume of 24.0 dm³ at RTP. We can use this relation to determine the number of moles of O₂ gas that reacts given its initial volume, 33.5 dm³.
33.5 dm³ O₂(g)/24.0 dm³/mol = 1.396 mol O₂(g).
Since we are not given any information about H₂(g), or any other reactant for that matter, I am assuming that the O₂(g) is the limiting reactant. According to the equation, the stoichiometric ratio between O₂ and H₂O is 1:2. That is, for every one mole of O₂ that is consumed, two moles of H₂O are formed (i.e., the number of moles of H₂O formed is double the number moles of O₂).
Since 1.396 moles of O₂ reacts, 2(1.396) = 2.792 moles of H₂O are produced. To convert moles of water to grams, we multiply the number of moles of H₂O by the molar mass of H₂O:
(2.792 moles H₂O)(18.015 g/mol) = 50.3 g H₂O.
So, approximately 50.3 grams of water are formed from 33.5 dm³ of oxygen gas at RTP.
Water vapor is not usually seen.
Answer:
True
Explanation:
Water vapor is totally invisible.
Without it, there would be no clouds or rain or snow, since all of these require water vapor in order to form. All of the water vapor that evaporates from the surface of the Earth eventually returns as precipitation - rain or snow.
Helped by the One & Only #QUEEN aka #DRIPPQUEENMO
Hoped this helped! :)
Why do you think Newton’s cradle stops swinging? What does this imply about the energy in the system of pendulums?
How many grams of Carbon Dioxide can be produced by the complete combustion of 140.0 grams of propene; C3H6? If the actual yield turns out to be 200.0 grams of carbon dioxide, what is the percent yield?
Answer:
2 C3H6 + 9 O2 6 H2O + 6 CO2
Theo. yield is 440.0 g CO2, % yield = 45.45% Explanation: hope it helps here for ur service
439.16 g of carbon dioxide is produced by complete combustion of 140 g of propene. The percent yield is 45.54%.
What is combustion?Combustion is defined as a high temperature exothermic reaction between a fuel which acts as a reductant and an oxidant which is usually atmospheric oxygen.It does not result in fire as the flame is visible only when substance which undergoes combustion vaporizes.
For combustion reactions to take place stoichiometry is followed according to which mass of reactants or products obtained or required is calculated.
2 C₃H₆ + 9 O₂ [tex]\rightarrow[/tex] 6 CO₂ + 6 H₂O
Here 2 molecules of propene react to give 6 molecules of carbon dioxide.
∴ for 140 grams of propene 140×264/84.16=439.16 g of molecules of CO₂ are produced.
Percent yield is calculated by dividing observed yield by theoretical yield which gives 45.54% according to this example.
Learn more about combustion,here:
https://brainly.com/question/14335621
#SPJ2
One mole of each of these compounds is dissolved in water. Which will result in the solution with the greatest conductivity?
1. NaCl
2. Mg(CIO3)2
3. NiCiz
4. CaCl2
Answer:
1. NaCl .
Explanation:
Hello there!
In this case, it is necessary to keep in mind that just ionic compounds are able to conduct electricity and therefore, the more ionic the compound is, the more electricity it conducts. In such a way, we may be able to predict how ionic these compounds are, considering that the electronegativity increases from bottom to top and from left to right.
1. NaCl: this is the most ionic compound since it is at the leftmost group and bonded with chlorine, so this is the most conductive one.
2. Mg(CIO3)2: Mg is bonded to O, not to Cl, which makes the compound ionic but not as ionic as NaCl.
3. NiCl: Ni is more electronegative than Na and Mg, so even when this is ionic, it is not as ionic as NaCl.
4. CaCl2: This is similar to NaCl but since Ca is in group 2A, it is more electronegative than Na, which makes CaCl2 conductive but not as much as NaCl.
Best regards!
How many moles of oxygen
react with 37.5 moles of sulfur
dioxide in the production of sulfur
trioxide gas?
Answer:
1 L of O2 reacts with 2 L of SO2.
Explanation:
From the balanced equation, 1 mol of oxygen
reacts with 2 mol sulfur dioxide.
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
Name the following acid: HNO3
Answer:
Nitric Acid
Explanation:
Also known as aqua Fortis and spirt of niter
Hope it helps
Answer:
Nitric Acid
Explanation:
"Nitric acid (HNO3), also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water."
==================================================================
Hope I Helped, Feel free to ask any questions to clarify :)
Have a great day!
More Love, More Peace, Less Hate.
-Aadi x
The answer is d but can anyone explain why and if not don't answer
Answer:
because the reaction can always be accelerated by heat
Melissa's mother was making chocolate chip cookies, but told Melissa that she shouldn't eat the raw cookie dough. Why is it unsafe to eat raw dough? -0) A) The dough can kill healthy bacteria in our mouths that help digest food. B) People that are allergic to the ingredients in dough are able to eat it safely after it has been baked. The flour in the dough will rapidly begin to spoil so it isn't safe to eat it until the cookies have been baked. D) Ingredients, such as flour and eggs, that are used to make dough can have bacteria. Baking is a step that kills the bacteria. А A The MAIN difference between terrestrial planets and gas giants is IL
Given the reaction: HNO2 (aq) <-> H+ (aq) + NO2- (aq); write the ionization constant for the reaction.
Answer:
see explanation
Explanation:
HNO₂ ⇄ H⁺ + NO₂⁻
Ka = [H⁺][NO₂⁻]/[HNO₂]
11. A mixture of magnesium powder and lead (II) Oxide will react vigorously when heated
but no reaction occurs when a mixture of magnesium oxide and lead powder are heated,
a) Explain the observation.
b Which of the two substances, magnesium or lead(IT) Oxide is;
i) Oxidized in the reaction?
ii) Oxidizing agent?
C Which is the most reactive metal
Please help
Answer:
Explanation:
The reaction is violent but safe, provided the procedure is followed exactly. ... Chemicals. Magnesium powder (HIGHLY FLAMMABLE), 0.25 g (note 4); Copper(II) oxide powder ... top must NOT be hot when the magnesium powder/copper oxide mix is added. ... After one or two minutes (be patient) a vigorous reaction occurs.
Which of the following does half-life measure? Question 2 options: gamma emission beta emission alpha emission radioactive decay rate
Answer:
b because the detective ate coffee all day
What type of substances can we separate using electrolyisis and why?
Answer:
ionic substances because they contain charged particles