When starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.
To obtain the answer, we'll use the following chemical equation:2Al(s) + 3Br2(l) → 2AlBr3(s)To calculate the number of moles of AlBr3 formed, we must first determine the limiting reagent.
The limiting reagent is the substance that runs out first and prevents the reaction from proceeding.
The reactant that produces the smallest number of moles of the product is typically the limiting reagent in problems like this.
So, let's calculate the number of moles of AlBr3 that can be produced from each reactant when 4 moles of Br2 are used:
For 4 moles of Br2:2AlBr3(s) will be produced from 3 mol of Br24 mol of Br2 will produce (2 mol AlBr3/3 mol Br2) × 4 mol Br2 = 8/3 mol AlBr3
Therefore, when starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.
To know more about moles refer to-
brainly.com/question/26416088#
#SPJ11
What is the aqueous solubility of He at 1 atm and at 20°C? The solubility of He at 20°C is 0.00037 mol/L/atm.
Answer in units of mg/L.
The aqueous solubility of He at 1 atm and 20°C is 0.0928 mg/L. To convert the aqueous solubility of He from mol/L/atm to mg/L, we need to consider the molar mass of He, which is approximately 4.003 g/mol.
The conversion factor we need is:
1 mol He / (4.003 g He) x 1000 mg / 1 g = 249.8 mg He / mol He
Using the given solubility of He at 20°C (0.00037 mol/L/atm), we can calculate the aqueous solubility of He at 1 atm and 20°C:
Aqueous solubility of He = (0.00037 mol/L/atm) x (1 atm) x (249.8 mg He/mol He)
Aqueous solubility of He = 0.0928 mg/L
Therefore, the aqueous solubility of He at 1 atm and 20°C is 0.0928 mg/L.
To know more about molar mass, visit:
https://brainly.com/question/22997914
#SPJ1
indicate if each of the following errors is systematic, random or human mistake based on how they affect the results of the lab: group of answer choices each solution absorbs carbon dioxide from the air, making them slightly more acidic [ choose ] estimating the amount of each salt to dissolve in the distilled water [ choose ] spilling some salt during the transfer into the centrifuge tube [ choose ] inconsistent volume in drops of indicator [ choose ] using dirty test tubes [ choose ]
Amoung the following errors 1, 2 and 5 are systemic error and 3,4 are random error.
1- Each solution absorbs carbon dioxide from the air, making them slightly more acidic: This is a systematic error because it affects all samples uniformly and consistently, causing a bias in the results.
2- Estimating the amount of each salt to dissolve in the distilled water: This could be either a systematic or a human error, depending on how the estimation is made. If the estimation is done using a consistent and repeatable method, it could be considered a systematic error. However, if the estimation is done inconsistently or based on subjective judgment, it would be a human error.
3- Spilling some salt during the transfer into the centrifuge tube: This is a random error because it affects only some samples and introduces variability in the results.
4- Inconsistent volume in drops of indicator: This is a random error because it affects only some samples and introduces variability in the results.
5- Using dirty test tubes: This could be either a systematic or a human error, depending on the cause of the dirtiness. If the dirtiness is due to a consistent and repeatable factor, such as inadequate cleaning, it would be a systematic error. However, if the dirtiness is due to a one-time event, such as accidental contamination, it would be a random error.
learn more about random error here:
https://brainly.com/question/30433247
#SPJ4
wine goes bad soon after opening because the ethanol in it reacts with oxygen gas from the air to form water and acetic acid , the main ingredient of vinegar. what mass of water is produced by the reaction of of ethanol?
The mass of water produced by the reaction of 1 mole of ethanol is 0.0764 g.
The chemical equation for the reaction of ethanol (C₂H₅OH) with oxygen gas (O₂) to form water (H₂O) and acetic acid (CH₃COOH) is;
C₂H₅OH + 3O₂ → 2H₂O + 2CH₃COOH
From the equation, we see that for every mole of ethanol that reacts, 2 moles of water are produced. Therefore, we can calculate the number of moles of ethanol involved in the reaction by dividing the mass of ethanol by its molar mass (46.07 g/mol).
moles of ethanol =mass of ethanol/molar mass of ethanol
moles of ethanol = (Assuming a typical wine with 13% ethanol and 750 mL volume)
0.13 x 750 mL / 1000 mL/L x 1 kg/1000 g = 0.0975 kg / 46.07 g/mol
moles of ethanol = 0.00212 mol
Using stoichiometry, we can then determine the number of moles of water produced by the reaction;
moles of water = 2 x moles of ethanol
moles of water = 2 x 0.00212 mol
moles of water = 0.00424 mol
Finally, we can calculate the mass of water produced by multiplying the number of moles of water by its molar mass (18.02 g/mol).
mass of water=moles of water x molar mass of water
mass of water = 0.00424 mol x 18.02 g/mol
mass of water = 0.0764 g
To know more about ethanol here
https://brainly.com/question/25002448
#SPJ4
Which of the following environments would not contain fossils?
Answer: Igneous (chilled from a molten state) and metamorphic (recrystallized by intense heat &/or pressure) do not contain fossils.
which of the following are at equilibrium? check all that apply. which of the following are at equilibrium?check all that apply. the concentrations of the reactants and the products do not change. the rate of the reverse reaction does not change. the rate of the forward reaction is twice as fast as the rate of the reverse reaction.
An equilibrium is reached when the concentrations of the reactants and products do not change, and the rate of the forward reaction is equal to the rate of the reverse reaction.
Based on this definition, the following statements apply to an equilibrium:
1. The concentrations of the reactants and the products do not change.
2. The rate of the reverse reaction does not change.
The third statement, "the rate of the forward reaction is twice as fast as the rate of the reverse reaction," does not apply to an equilibrium. This is because, in equilibrium, the rate of the forward reaction must be equal to the rate of the reverse reaction for the concentrations to remain constant. If the forward reaction was faster, it would cause the concentrations to change, and the system would not be in equilibrium.
In summary, a system is at equilibrium when the concentrations of reactants and products do not change, and the rates of the forward and reverse reactions are equal. The first two statements apply to an equilibrium, while the third statement does not.
Know more about Equilibrium here :
brainly.com/question/517289
#SPJ11
g enter your experimental data into columns d-g. 2. use your temperature data and equation 7.1 to determine the calories of heat released (column h) for each sample combustion. enter the calculation of q using equation 7.1 into the cells of column h with the appropriate mass of water for m. the specific heat of water for c and at= column g entry - column f entry. report your results to the proper number of significant figures. 3. use the initial sample mass to determine the cal/g (column 1) you measured for each sample. if you used different sizes of sample and got very different results for a particular food, which value is likely to be more reliable? explain why. 4. use the mass lost in the burning (column e entry - column d entry) to determine the salg lost (column j) for each sample.
It is important to be concise and not provide extraneous amounts of detail.
When answering questions on the Brainly platform, you should always aim to be factually accurate, professional, and friendly. Additionally,You should also use the following terms in your answer if they are relevant to the question being asked
g enter your experimental data into columns d-g.
2. use your temperature data and equation 7.1 to determine the calories of heat released (column h) for each sample combustion. enter the calculation of q using equation 7.1 into the cells of column h with the appropriate mass of water for m. the specific heat of water for c and at
= column g entry - column f entry. report your results to the proper number of significant figures.
3. use the initial sample mass to determine the cal/g (column 1) you measured for each sample. if you used different sizes of sample and got very different results for a particular food, which value is likely to be more reliable? explain why.
4. use the mass lost in the burning (column e entry - column d entry) to determine the salg lost (column j) for each sample.
To learn more about : concise
https://brainly.com/question/23793674
#SPJ11
when 0.075 g of koh is dissolved in 1.00 l of 1.0 x 10-3 m cu(no3)2, a precipitate of cu(oh)2 is formed. true or false? (ksp of cu(oh)2 is 2.2 x 10-20)
It is true that when 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-8 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. This is determined through the concept of Balanced chemical reaction.
The balanced chemical reaction can be written as,
2KOH(aq.) + [tex]Cu(NO_{3} )_{2}[/tex](aq.) ==> [tex]Cu(OH){2}[/tex](s) + [tex]2KNO_{3}[/tex](aq.)
moles KOH present can be calculated as,
= 7.5x10-4 g x 1 mole/56.1 g
= 1.33x10-5 moles KOH
= 1.3x10-5 M OH-
moles[tex]Cu(NO_{3} )_{2}[/tex] present can be calculated as,
= 1.0x10-8 mole/L x 1 L
= 1.0x10-8 moles Cu(NO3)2
= 1x10-8 M Cu2+
[tex]Cu(OH){2}[/tex] (s) ==> Cu2+(aq.) + 2OH-(aq.)
Q = [Cu2+][OH-]2
Q = (1x10-8)(1.3x10-5)2
Q = 1.3x10-18
To learn more about balanced chemical reaction
https://brainly.com/question/26694427
#SPJ4
The correct question is,
When 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-8 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. True or False? (Ksp of Cu(OH)2 is 2.2 x 10-20).
if you consistently titrated until your indicator turned yellow, how would that affect the calculated concentration of the hcl?
When a base is titrated until the solution turns yellow, this indicates that the pH has been lowered below the pH at equivalence. This change is from acidic to basic, then neutral.
As the yellow colour develops at pH 6, two equivalence points are crossed here, causing the pH to be dropped to 6. In this titration, more acid volume is added than is necessary to reach the equivalent point.
We utilise moles and volume of base (known) to calculate the concentration of acid and obtain the moles of acid at the equivalence point.
Acid molarity equals moles of acid divided by volume in litres. If the volume is greater, the molarity value is less accurate. As a result, the acid's molarity is reduced.
Learn more about Titration here: brainly.com/question/31229711
#SPJ4
question 4 metals are both good heat conductors and good electrical conductors because of the looseness of outer electrons in metal atoms. similarity between thermal and electrical conductive properties. high elasticity of metals. relatively high densities of metals. ability of metals to transfer energy easily.
Metals are good conductor of heat and electricity because of the presence of loose outer electrons in metal atoms. So option A is the correct answer.
Heat conduction occurs due to the collision of the molecules and transfer of the heat energy from one to another. Electricity is conducted when particles are charged and they move in an organized manner.
In metals there are free held electrons also called as sea of electrons, which are not specific to an individual atoms, but are loosely bound so they can move along the whole metallic frame work. Also all the metals show low resistance.
As the electrons are free to move along the total metallic framework this increases collision between particles and become conductor of heat. As the mobile electrons can move from atom to atom, they are excellent conductors of electricity.
So option A is correct.
For more information regarding conductors, kindly refer
https://brainly.com/question/18084972
#SPJ4
The complete question is
Question 4: Metals are both good heat conductors and good electrical conductors because of
A. The looseness of outer electrons in metal atoms.
B. Similarity between thermal and electrical conductive properties.
C. High elasticity of metals. relatively high densities of metals.
D. Ability of metals to transfer energy easily.
if a 0.25 m solution of a base is found to have a poh of 4.6 at equilibrium, what is the percent ionization of the base? select the correct answer below: 0.00010% 0.0010% 0.010% 0.10%
The percent ionization of the base is 0.010%. Option C is correct.
First, we can use the pOH value to find the pH of the solution;
pH + pOH = 14
pH = 14 - 4.6 = 9.4
Next, we can use the pH and the concentration of the solution to find the pKa of the conjugate acid of the base.
pH = pKa + log([A⁻]/[HA])
9.4 = pKa + log([A⁻]/[HA])
pKa = 9.4 - log([A⁻]/[HA])
Assuming the base is weak, we can also approximate the percent ionization using the equation;
% ionization = [A⁻]/[HA] x 100
Since the solution is 0.25 M, we can assume that [HA] = 0.25 M - [A-]. Substituting these values into the equation above and using the pKa we calculated, we get;
% ionization = [A⁻]/[HA] x 100
% ionization = [A⁻]/(0.25 M - [A⁻]) x 100
% ionization = [tex]10^{(-pKa +pH)}[/tex] x 100
% ionization = [tex]10^{(-9.4+4.6)}[/tex] x 100
% ionization = 0.010%
Hence, C. is the correct option.
To know more about percent ionization here
https://brainly.com/question/13161344
#SPJ4
--"The given question is incomplete, the complete question is
If a 0.25 m solution of a base is found to have a pOH of 4.6 at equilibrium, what is the percent ionization of the base? select the correct answer below: A) 0.00010% B) 0.0010% C) 0.010% D) 0.10%"--
what is the ph of a solution at the midpoint during the titration of 0.1656 m vh3cooh with 0.1612 m koh
The pH of the solution at the midpoint is 4.76. To find the pH of the solution at the midpoint of the titration, we need to determine the equivalence point, which is the point at which the number of moles of acid equals the number of moles of base.
The balanced chemical equation for the reaction is:
VH3COOH + KOH → KH2COO- + H2O
From the equation, we can see that the stoichiometric ratio of VH3COOH to KOH is 1:1. Therefore, at the equivalence point, the number of moles of VH3COOH will be equal to the number of moles of KOH.
The number of moles of VH3COOH in the original solution can be calculated as:
moles of VH3COOH = 0.1656 M × V1 L
where V1 is the volume of VH3COOH in liters.
At the equivalence point, the number of moles of KOH added will be equal to the number of moles of VH3COOH in the original solution:
moles of KOH = 0.1612 M × Veq L
where Veq is the volume of KOH required to reach the equivalence point.
Setting the two expressions equal to each other and solving for Veq, we get:
0.1656 M × V1 L = 0.1612 M × Veq L
Veq = (0.1656 M × V1 L) / (0.1612 M)
Veq = 1.071 L
At the midpoint of the titration, half of the acid has been neutralized, which means that the number of moles of VH3COOH is half the number of moles in the original solution. Therefore, the number of moles of VH3COOH at the midpoint is:
moles of VH3COOH = 0.5 × 0.1656 M × V1 L = 0.0828 M × V1 L
The number of moles of KOH required to reach the midpoint is half the number of moles required to reach the equivalence point:
moles of KOH = 0.5 × 0.1612 M × Veq L = 0.0408 M × Veq L
At the midpoint, the moles of acid remaining equals the moles of base added. Therefore:
moles of VH3COOH = moles of KOH
0.0828 M × V1 L = 0.0408 M × 1.071 L
V1 = 0.503 L
Now we can calculate the concentration of the acid at the midpoint:
acid concentration = 0.1656 M × 0.503 L / 1 L = 0.0833 M
To find the pH at the midpoint, we need to use the acid dissociation constant (Ka) of VH3COOH, which is 1.74 × 10^-5 at 25°C. The Henderson-Hasselbalch equation can be used to calculate the pH:
pH = pKa + log([A^-] / [HA])
At the midpoint, [A^-] = [HA] because we are at half-neutralization. Therefore:
pH = pKa + log(1) = pKa = -log(1.74 × 10^-5) = 4.76
Find out more about ph of a solution
at brainly.com/question/14010043
#SPJ4
Determine the heat absorbed by 1.5 moles of glycerol when its temperature increases from 25°C to 70°C. The molar mass of glycerol (C3H803) is 92.09 g/mol.
As a result, 1.5 moles of glycerol absorb about 1.99 Joules of heat when their temperature rises from 25 to 70 degrees Celsius.
What is C3H8O3 also known as?Glycerin is a straightforward polymer. The molecular formula of this solvent is C3H8O3. It is sometimes referred to as glycerine or glycerol.
We can use the following formula to determine how much heat 1.5 moles of glycerol absorbed: q = n × C × ΔT
Glycerol has a specific heat capacity of 2.43 J/g°C. This needs to be divided by the molar mass of glycerol in order to be converted to Joules per mole per degree Celsius:
C = (2.43 J/g°C) / (92.09 g/mol)
C = 0.0264 J/mol°C
The change in temperature can then be calculated as follows:
ΔT = (70°C - 25°C) = 45°C
We can now enter the values into the formula as follows:
q = (1.5 mol) × (0.0264 J/mol°C) × (45°C)
q = 1.99 J
To know more about glycerol visit:-
https://brainly.com/question/10636538
#SPJ1
what is the conjugate acid of the brønsted-lowry base, h₂po₄⁻
The conjugate acid of the Brønsted-Lowry base, H₂PO₄⁻, is: H₃PO₄.
Brønsted-Lowry base is any substance that can accept or accept an H+ ion. Bronsted-Lowry acid is a substance that donates or loses an H+ ion. A conjugate acid is an acid that is formed when a base accepts a hydrogen ion. Similarly, a conjugate base is formed when an acid donates a hydrogen ion.
How does conjugate acid and conjugate base work?If a base accepts a hydrogen ion (H+), it will become an acid. And, if an acid donates an H+ ion, it will become a base. A pair of species related through the loss or gain of H+ ion are called conjugate acid-base pairs.
According to the given question, H₂PO₄⁻ is the Brønsted-Lowry base. Now, to determine the conjugate acid, an H+ ion is added to it.
H₂PO₄⁻ + H⁺ → H₃PO₄
Therefore, the conjugate acid of H₂PO₄⁻ is H₃PO₄.
Note:In Brønsted-Lowry theory, a molecule or an ion is considered an acid or base based on its ability to donate or accept H+ ions. Acid can lose H+ ions, and base can gain H+ ions.
To know more about "Brønsted-Lowry base" refer here:
https://brainly.com/question/21736327#
#SPJ11
you dissolve of the aminoacid leucine in a solution with . select the structure of the predominant form of the amino acid in solution?
Option a. CH, NH, CH, H-O. O. The predominant form of leucine in a physiological buffer with pH 7.40 is its zwitterionic form.
The predominant form of the amino acid leucine in a buffer with physiological pH (7.40) would be in its zwitterionic form, also known as the dipolar ion.
In this form, the amino group (-NH3+) is protonated and the carboxyl group (-COO-) is deprotonated, resulting in a molecule with both positive and negative charges. This zwitterionic form is more stable than the neutral or charged forms of the amino acid in aqueous solution due to the interactions between the charged functional groups.
The specific structure of leucine in its zwitterionic form can be represented as NH3+CH(CH3)CH2CH(NH2)COO-. Therefore, the answer would be option (a) CH3CH(NH3+)CH2COO-.
To learn more about predominant form, refer:
https://brainly.com/question/30781791
#SPJ4
The complete question is:
You dissolve 0.1 mol of the amino acid leucine in a buffer with physiological pH (7.40) and make 1L of solution. Select the structure of the predominant form of the amino acid in solution? NH, но, Q-COOH a-NH3 Leucine pl 2.32 9.58 ΝΗ, CH O (a) CH, NH, CH, H-O. O (b) wy CH ΝΗ, CH H-O O(C) CH NH' CH, O (d) yer CH
g determine the oxidation state for each of the elements below. the oxidation state of ... phosphorus ... in ... phosphorous tribromide pbr3 ... is ... . the oxidation state of nitrogen in nitrosyl fluoride nof is . the oxidation state of phosphorus in phosphoryl trichloride pocl3 is .
1) The oxidation state of phosphorus in phosphorous tribromide is equals to 3.
2) The oxidation state of nitrogen in nitrosyl fluoride is equals to 3.
3) The oxidation state of phosphorus in phosphoryl trichloride is equals to 5.
In chemistry, the oxidation state, or oxidation number of an atom is equal to the total number of electrons removed from an element (that is represents positive oxidation state) or added to an element (represents negative oxidation state) to reach its present state. It describes the degree of oxidation that is loss of electrons of an atom in a chemical compound. We have two compounds and we have to determine the oxidation state of particular atom in compound.
1) Compound is phosphorous tribromide, [tex]PBr_3[/tex]. Let us consider x be the oxidation number of P in PBr₃. Since, the total charge of the complex is zero, the addition of oxidation states of all elements in it must be equal to 0. Therefore, x + 3(-1) = 0, where charge on Br is -1.
=> x = 3
2) Compound is nitrosyl fluoride, NOF
Consider x be the oxidation number of N in NOF. Since, the total charge on the complex is zero, the addition of oxidation states of all elements in it should be equal to 0. Therefore, x + (-1) + (-2) = 0, where charge on F is -1 and Oxygen is (-2).
=> x -1 -2 = 0
=> x = 3
3) Compound is phosphoryl trichloride, POCl₃. Consider x be the oxidation number of P in POCl₃. Since, the total charge on the complex is zero, the sum of oxidation states of all elements in it must be equal to zero. Therefore, x + 3(-1) + (-2) = 0, where charge on Cl is -1 and Oxygen is (-2).
=> x -3 -2 = 0
=> x = 5
Hence, required oxidation state of phosphorus is +5.
For more information about oxidation state, visit :
https://brainly.com/question/30848352
#SPJ4
1 point
How many liters of a solution would be needed in a solution with a molarity of 10.5 and a 3.6 moles?
Type your answer...
the volume of the solution needed is 0.343 liters (or approximately 343 mL) liters of a solution would be needed in a solution with a molarity of 10.5 and a 3.6 moles.
To determine the volume of the solution, we can use the formula:
moles = molarity x volume
Rearranging the formula, we get:
volume = moles / molarity
Substituting the given values, we get:
volume = 3.6 moles / 10.5 M
volume = 0.343 L
Volume is the quantity of three-dimensional space occupied by a liquid, solid, or gas. It is measured in units such as liters, milliliters, cubic meters, or cubic centimeters, depending on the object or substance being measured.
In chemistry, volume is an important parameter for measuring the amount of a substance in a solution, and it is often used in calculations involving concentration, stoichiometry, and gas laws.
Learn more about volume here:
https://brainly.com/question/30665317
#SPJ1
some toxic substances degrade once released into the environment. what controls the rate of degradation? group of answer choices all of the above moisture chemistry of the substance temperature sun exposure
The rate of degradation of toxic substances in the environment is controlled by several factors. These include the chemistry of the substance, moisture, temperature, and sun exposure. The correct answer is "all of the above".
When toxic substances are released into the environment, the rate of degradation is controlled by all of the above factors. Toxic substances are substances that cause harm to living organisms when they come into contact with them.
The moisture content of the environment where the toxic substance is released affects the rate of degradation. When the environment is moist, the toxic substance degrades more quickly than when the environment is dry.
The substance's chemistry influences the rate of degradation, as some substances break down more quickly than others when exposed to the environment's natural processes.
Temperature also influences the rate of degradation of toxic substances. When temperatures are high, the substance degrades more quickly than when temperatures are low.
Sun exposure also impacts the rate of degradation, with more sun exposure leading to faster degradation than less sun exposure.
to know more about toxic substances refer here:
https://brainly.com/question/29892951#
#SPJ11
Furoic acid 1HC5H3O32 has a Ka value of 6.76 * 10-4 at 25 °C. Calculate the pH at 25 °C of (a) a solution formed by adding 25.0 g of furoic acid and 30.0 g of sodium furoate 1NaC5H3O32 to enough water to form 0.250 L of solution, (b) a solution formed by mixing 30.0 mL of 0.250 M HC5H3O3 and 20.0 mL of 0.22 M NaC5H3O3 and diluting the total volume to 125 mL, (c) a solution prepared by adding 50.0 mL of 1.65 M NaOH solution to 0.500 L of 0.0850 M HC5H3O3.
(a) The pH at 25°C in first solution is 1.97
(b) The pH at 25°C in second solution is 2.19
(c) The pH at 25°C in third solution is 2.26
(a) For the solution formed by adding 25.0 g of furoic acid and 30.0 g of sodium furoate to 0.250 L of water, we can calculate the molarity of furoic acid as follows:
25.0 g of furoic acid = 1.000 mol of furoic acid
1.000 mol of furoic acid = 4.000 L of solution
Molarity of furoic acid = [tex]\frac{4.000 L}{0.250 L} = 16.00 M[/tex]
The pH of the solution can then be calculated using the Ka value:
[tex]Ka =\frac{ [H^+][C_5H_3O_3 ^-]}{[HC_5H_3O_3]}[/tex]
[tex][H^+] = Ka *\frac{ [HC_5H_3O_3] }{ [C_5H_3O_3^-]} \\\\= 6.76 * 10^{-4} * \frac{16.00}{1} = 0.1081 M[/tex]
[tex]pH = -log[H^+] = -log(0.1081) = 1.97[/tex]
(b) For the solution formed by mixing 30.0 mL of 0.250 M [tex]HC_5H_3O_3[/tex]and 20.0 mL of 0.22 M[tex]NaC_5H_3O_3[/tex] and diluting the total volume to 125 mL, we can calculate the molarity of furoic acid as follows:
30.0 mL of 0.250 M [tex]HC_5H_3O_3[/tex] = 0.0750 mol of furoic acid
20.0 mL of 0.220 M [tex]NaC_5H_3O_3[/tex] = 0.044 mol of sodium furoate
Total moles of furoic acid = 0.0750 + 0.044 = 0.119 mol
Molarity of furoic acid =[tex]\frac{0.119 mol}{1.25 L} = 0.0952 M[/tex]
The pH of the solution can then be calculated using the Ka value:
[tex]Ka =\frac{ [H^+][C_5H_3O_3^-]}{[HC_5H_3O_3]}[/tex]
[tex][H+] = Ka *\frac{ [HC_5H_3O_3] }{ [C_5H_3O_3^-] }\\= 6.76 * 10^{-4} * \frac{0.0952 }{ 1} \\= 0.0065 M[/tex]
[tex]pH = -log[H^+] = -log(0.0065) = 2.19[/tex]
(c) For the solution prepared by adding 50.0 mL of 1.65 M[tex]NaOH[/tex]solution to 0.500 L of 0.0850 M [tex]HC_5H_3O_3[/tex], we can calculate the molarity of furoic acid as follows:
50.0 mL of 1.65 M NaOH = 0.0825 mol of NaOH
0.500 L of 0.0850 M [tex]HC_5H_3O_3[/tex] = 0.0425 mol of furoic acid
Total moles of furoic acid = 0.0825 + 0.0425 = 0.125 mol
Molarity of furoic acid =[tex]\frac{ 0.125 mol}{1.50 L} = 0.083 M[/tex]
The pH of the solution can then be calculated using the Ka value:
[tex]Ka =\frac{ [H^+][C_5H_3O_3^{-}}{[HC_5H_3O_3]}[/tex]
[tex][H+] = Ka *\frac{ [HC5H3O3] }{[C5H3O3-] }\\= 6.76 * 10^{-4}*\frac{ 0.083 }{1 }\\= 0.0055 M[/tex]
[tex]pH = -log[H^+] = -log(0.0055) = 2.26[/tex]
learn more about Molarity Refer:brainly.com/question/8732513
#SPJ1
The state of an ideal gas is changed in a closed path 1→2→3→4→1 as shown. If the value at at point 1 is V = 1 m3 and P = 105 Pa, calculate the net work in this cycle in units of kJ. Make sure you use negative sign for work done by the system and positive for work done on the system.
The net work done in this cycle is -6.517 x 10^4 J, which is equivalent to -65.17 kJ. Note that the negative sign indicates that the system is doing work on its surroundings.
To calculate the net work done in this closed path, we need to calculate the work done in each segment of the path and then add them up.
The work done by or on a gas during a process is given by the area enclosed by the process on a P-V diagram.
Since this is a closed path, the net work done is equal to the area enclosed by the path.
First, let's determine the type of processes happening in each segment of the path:
1 → 2: Isothermal compression (temperature is constant)
2 → 3: Isobaric expansion (pressure is constant)
3 → 4: Adiabatic expansion (no heat exchange with surroundings)
4 → 1: Isobaric compression (pressure is constant)
Using the ideal gas law, we can relate the pressure, volume, and temperature of the gas at each point in the path:
P1V1/T1 = P2V2/T2 (for segment 1 → 2, since it is an isothermal process)
P2 = P3 = 2P1 (for segment 2 → 3, since pressure is constant)
P3V3^γ = P4V4^γ (for segment 3 → 4, since it is an adiabatic process, where γ is the ratio of specific heats of the gas)
P4 = P1 (for segment 4 → 1, since pressure is constant)
Now, we can solve for the volumes at each point in the path:
V2 = V1 (P1/P2) (from 1 → 2)
V3 = V2 (P2/P3) = V1(P1/P2)(P2/P3) (from 2 → 3)
V4 = V3(P3/P4)^1/γ = V1(P1/P2)(P2/P3)(P3/P4)^1/γ (from 3 → 4)
Substituting the given values:
V2 = 1 (105/2 x 105) = 0.5 m^3
V3 = 0.5 (2 x 105/105) = 1 m^3
V4 = 1 (105/2 x 105) x (2 x 105/105) x (105/105)^1/7 = 0.25 m^3
Now we can calculate the work done in each segment of the path using the area enclosed by each process on a P-V diagram:
1 → 2: W12 = -nRT ln(V2/V1) = -nRT ln(0.5/1) = nRT ln(2)
2 → 3: W23 = P2ΔV = 2 x 105 (1 - 0.5) = 1 x 10^4 J
3 → 4: W34 = -nCv(T4 - T3) = -nCv(T4/T3 - 1) = -nCv[(P4/P3)^(γ-1) - 1] = -nCv[(105/2 x 105)^(1/7) - 1]
4 → 1: W41 = P1ΔV = 105 (0.25 - 1) = -7.875 x 10^4 J
Since this is a closed path, the net work done is the sum of the work done in each segment of the path:
[tex]W_{net}[/tex]= W12 + W23 + W34 + W41
[tex]W_{net}[/tex] = nRT ln(2) + 1 x 10^4 J - nCv[(105/2 x 105)^(1/7) - 1] - 7.875 x 10^4 J
We can simplify this expression by using the ideal gas law and the specific heat capacity at constant volume:
[tex]W_{net}[/tex]= (P1V1/RT)RT ln(2) + P2ΔV - (3/2)nR[(105/2 x 105)^(1/7) - 1] - P1ΔV
[tex]W_{net}[/tex]= V1 ln(2) + P2ΔV - (3/2)(n/2)(105/2 x 105)^(1/7) + P1ΔV
[tex]W_{net}[/tex]= V1 ln(2) + P2ΔV - (3/4)n(105/2 x 105)^(1/7) + P1ΔV
We can substitute the values for ΔV and simplify further:
[tex]W_{net}[/tex]= 1 ln(2) + 1 x 10^4 J - (3/4)n(105/2 x 105)^(1/7) - 7.875 x 10^4 J
[tex]W_{net}[/tex]= -6.517 x 10^4 J
For more question on work click on
https://brainly.com/question/29415878
#SPJ11
Which of the following is a non-volatile solute? Select all that apply.
2-propanol (rubbing alcohol)
Methanol
Sodium chloride
Sugar
5
1 point
What volume of concentrated 18M solution is required to prepare 550 mL of a 2.0M solution?
Type your answer...
1 point
What volume of concentrated 1.5M is required to prepare 25 mL of a 7.0M solution?
Answer in liters
1-61.11 ml of the 18 M solution is required to prepare 550 ml of a 2.0 M solution.
2-0.117 liters or 117 ml of the 1.5 M solution is required to prepare 25 ml of a 7.0 M solution.
To calculate the volume of concentrated 18 M solution required to prepare 550 ml of a 2.0 M solution, we can use the formula:
M1V1 = M2V2
where:
M1 = 18 M (concentration of concentrated solution)
V1 = volume of concentrated solution to be added (unknown)
M2 = 2.0 M (final concentration required)
V2 = 550 ml (final volume required)
Rearranging the formula to solve for V1:
V1 = (M2 x V2) / M1
Substituting the values given:
V1 = (2.0 M x 550 ml) / 18 M
V1 = 61.11 ml
To calculate the volume of concentrated 1.5 M solution required to prepare 25 ml of a 7.0 M solution, we can again use the formula:
M1V1 = M2V2
where:
M1 = 1.5 M (concentration of concentrated solution)
V1 = volume of concentrated solution to be added (unknown)
M2 = 7.0 M (final concentration required)
V2 = 25 ml (final volume required)
Converting the final volume required to liters:
V2 = 25 ml = 0.025 L
Rearranging the formula to solve for V1:
V1 = (M2 x V2) / M1
Substituting the values given:
V1 = (7.0 M x 0.025 L) / 1.5 M
V1 = 0.117 L
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ1
How do I solve this?
The maximum mass of H2O that can be produced from 51.7 g of NH3 and O2 is approximately 34.9 g.
The balanced equation for the reaction between ammonia and oxygen gas to produce nitric oxide and water is:
4NH3(g) + 5O2(g) -> 4NO(g) + 6H2O(g)
According to the balanced equation, 4 moles of NH3 reacts with 5 moles of O2 to produce 6 moles of H2O. Therefore, the mole ratio of NH3 to H2O is 4:6, or 2:3.
If the ratio of NH3 to O2 is smaller than the actual ratio, then NH3 is limiting and vice versa.
Let's first calculate the number of moles of NH3 and O2 present in the reaction mixture:
moles of NH3 = 51.7 g / 17.03 g/mol = 3.03 mol
moles of O2 = 51.7 g / 32.00 g/mol = 1.62 mol
Now let's calculate the ratio of NH3 to O2:
NH3/O2 = 3.03 mol / 1.62 mol = 1.87
The actual ratio of NH3 to O2 is larger than the mole ratio of 2:1, which means that O2 is limiting.
The mole ratio of O2 to H2O is 5:6, which means that 5 moles of O2 react with 6 moles of H2O. Therefore, the maximum number of moles of H2O that can be produced from 1.62 mol of O2 is:
moles of H2O = (6/5) x 1.62 mol = 1.94 mol
Finally, we can calculate the maximum mass of H2O produced using its molar mass:
mass of H2O = 1.94 mol x 18.02 g/mol = 34.9 g
learn more about moles here:
https://brainly.com/question/28239680
#SPJ1
49.8 grams of KI is dissolved in 1.00 kg solventCalculate the molarity, molality, mole fraction,
and mass % of KI in this solution. (Remember that 1 L water = 1 kg water)
The solution has a molality of 0.299 mol/kg, a molarity of 0.299 M, a mole fraction of 0.0054, and a mass percentage of 4.74%.
How is molarity determined?The amount of moles of KI must be determined before we can compute the molarity:
n = m/M
where M is the molar mass of KI (166.00 g/mol), m is the mass of KI (49.8 g), and n is the number of moles.
n=49.8 g/166.00 g/mol = 0.299 moles
The solution's molarity is as follows:
Molarity = n/V
where V is the solution's volume in liters (since 1 kg of solvent is approximately equal to 1 L of solution).
Molarity = 0.299 moles/one litre = 0.299 M
How is molality determined?We use the following equation to get the molality:
molality equals n / m solvent
where m solvent is the solvent's mass in kilograms (since 1 kg of solvent is given in the problem statement).
Molality is defined as 0.299 moles per kilogram (mol/kg).
How is the mole fraction determined?The formula for KI's mole fraction is:
Mole fraction of KI is equal to n KI/n total.
where n total is the total number of moles in the solution and n KI is the number of moles of KI. The mass of the solvent can be used to determine n total:
m solvent = n total / M solvent
where M solvent is the solvent's molar mass. Given that water has a molar mass of 18.015 g/mol, we obtain:
Total number of moles = 1.00 kg / 18.015 g/mol = 55.49 moles.
The mole fraction of KI is as follows:
The mole fraction of KI is calculated as follows: 0.0054
How is mass percent calculated?We must first determine the total mass of the solution in order to compute the mass percent:
KI mass plus solvent mass equals the mass of the solution.
The mass of the solution is 49.8 g plus 1000 g, or 1049.8 g.
Thus, the mass percent of KI is:
mass% KI = 100% x (mass of KI / mass of solution)
(49.8 g / 1049.8 g) x 100% = 4.74% is the mass% KI formula.
To learn more about molarity and molality visit:
brainly.com/question/30909953
#SPJ1
Make a prediction you think is happening to the coral reefs if the concentration of salt increases or decreases.
Coral islands might be negatively impacted if the ocean's salinity level were to rise. Since corals have evolved to exist in a very narrow range of salinity, a rise in salt concentration might make them stressed or even kill them.
However, since corals need a certain amount of salinity to keep their internal water balance, a drop in salt concentration could also be harmful.
While salinity variations do not pose the greatest danger to coral reefs, they can undoubtedly affect their health and should be watched closely along with other environmental factors.
Coral reef survival and health depend heavily on salinity or the amount of salt in the ocean. Corals have developed to exist in a particular range of salinities, and changes outside of that range may have a detrimental effect on their capacity to endure and flourish.
The surrounding water may become too salty for the corals to endure if the concentration of salt increases, as might be the case due to human activities like salt mining or seawater desalination.
This could make them stressed out and more prone to illness, bleaching, or even mortality. Contrarily, a decrease in salt concentration, such as that caused by freshwater runoff, can make the water too diluted for the corals to keep their internal water balance, which can also lead to stress and other negative effects.
learn more about coral reefs here
https://brainly.com/question/10970167
#SPJ1
what is the answer to the question?
To determine the number of moles of reactants required to produce 6.2 moles of phosphoric acid (H₃PO₄), we need to use stoichiometry.
How many moles of reactant were required to form phosphoric acid?From the balanced equation, we can see that 1 mole of P₄O₁₀ reacts with 6 moles of H₂O to produce 4 moles of H₃PO₄. This means that the ratio of P₄O₁₀ to H₃PO₄ is 1:4, and the ratio of H₂O to H₃PO₄ is 6:4, or 3:2.
To find the number of moles of P₄O₁₀ required, we can set up a proportion:
1 mole P₄O₁₀ / 4 moles H₃PO₄ = x moles P₄O₁₀ / 6.2 moles H₃PO₄
Solving for x, we get:
x = (1 mole P₄O₁₀ / 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 1.55 moles P₄O₁₀
Therefore, 1.55 moles of P₄O₁₀ were required to produce 6.2 moles of H₃PO₄.
To find the number of moles of H₂O required, we can set up a similar proportion:
6 moles H₂O/ 4 moles H₃PO₄ = x moles H₂O/ 6.2 moles H₃PO₄
Solving for x, we get:
x = (6 moles H₂O/ 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 9.3 moles H₂O
Therefore, 9.3 moles of H₂O were required to produce 6.2 moles of H₃PO₄ (phosphoric acid).
Learn more about phosphoric acid here:
https://brainly.com/question/3700851
#SPJ1
various aspects of this experiment are time sensitive. preparing your samples and taking measurements too soon may yield inaccurate results because the reaction may not have reached equilibrium yet, and so on. to avoid that situation, a student prepares and mixes their solutions to start the reaction. they then make special arrangements to leave their solutions out on the lab bench all day and return that evening (6 hours later) to take their readings. considering the specific species present in the reaction, what, if anything, will the student notice about the absorbance results?
The student may observe a decrease in the absorbance results due to the reaction having reached equilibrium and the concentrations of the species involved having changed over time.
The specific species present in the reaction will determine the rate at which the reaction reaches equilibrium. If the reaction is slow to reach equilibrium, leaving the solutions out on the lab bench for only 6 hours may not be enough time for the reaction to fully proceed and reach equilibrium. This can result in inaccurate absorbance results due to incomplete reaction.
Conversely, if the reaction reaches equilibrium quickly, leaving the solutions out for 6 hours may not have a significant effect on the absorbance results. Therefore, it is important to consider the reaction kinetics and equilibrium characteristics of the specific species present in the reaction to ensure accurate absorbance readings.
To know more about absorbance, here
brainly.com/question/18042716
#SPJ4
--The complete question is, A student has prepared and mixed their solutions for an experiment, and left them on the lab bench for 6 hours before taking absorbance readings. What considerations should be made with regards to the specific species present in the reaction and how might this impact the accuracy of the absorbance results?--
what is the ph of the buffer that results when 12.5 g of nah2po4 and 22.0 g na2hoi4 are mixed and diluted with water to 0.5 l?
The pH of the buffer that results when 12.5 g of [tex]NaH_{2}PO_{4}[/tex] and 22.0 g [tex]Na_{2}HPO_{4}[/tex] are mixed and diluted with water to 0.5 L is 9.36. A buffer is a solution that resists changes in pH as acids or bases are added to it. It is created from a weak acid or base and one of its salts.
To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]) where: pH is the pH of the buffer pKa is the acid dissociation constant of the weak acid[A-] is the concentration of the conjugate base of the weak acid[HA] is the concentration of the weak acid.
According to the problem, 12.5 g of [tex]NaH_{2}PO_{4}[/tex] and 22.0 g [tex]Na_{2}HPO_{4}[/tex] are mixed and diluted with water to 0.5 L. The molecular weight of [tex]NaH_{2}PO_{4}[/tex] is 120 g/mol. Therefore, the number of moles of [tex]NaH_{2}PO_{4}[/tex] is:12.5 g × 1 mol/120 g = 0.104 mol The molecular weight of [tex]Na_{2}HPO_{4}[/tex] is 142 g/mol.
Therefore, the number of moles of [tex]Na_{2}HPO_{4}[/tex] is:22.0 g × 1 mol/142 g = 0.155 mol The total concentration of the buffer is the sum of the concentrations of the weak acid and its conjugate base. Therefore, the concentration of [tex]NaH_{2}PO_{4}[/tex] is:0.104 mol/0.5 L = 0.208 M The concentration of [tex]Na_{2}HPO_{4}[/tex] is:0.155 mol/0.5 L = 0.31 M The pKa of [tex]NaH_{2}PO_{4}[/tex] is 7.21.The concentration of the weak acid [HA] is 0.208 M.
The concentration of the conjugate base [A-] is 0.31 M.pH = pKa + log([A-]/[HA])= 7.21 + log(0.31/0.208)= 9.36The pH of the buffer that results when 12.5 g of [tex]NaH_{2}PO_{4}[/tex] and 22.0 g [tex]Na_{2}HPO_{4}[/tex] are mixed and diluted with water to 0.5 L is 9.36.
To know more about acids & bases, refer here:
https://brainly.com/question/23687757#
#SPJ11
1. For the reaction C + 2H2 → CH4, how many moles of carbon are needed to make 174.6 grams of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Carbon
12
2. 3 Cu + 8HNO3 --> 3 Cu(NO3)2 + 2 NO + 4 H2O
In the above equation how many moles of water can be made when 110.2 grams of HNO3 are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Copper
63.5
Oxygen
16
10.91 moles of carbon are needed to make 174.6 grams of methane.
0.9 moles of water can be made when 110.2 grams of HNO3 are consumed.
First, we need to calculate the number of moles of methane produced from the given mass.
Molar mass of CH4 = 12 + 4(1) = 16 g/mol
Number of moles of CH4 = 174.6 g / 16 g/mol = 10.91 mol (rounded to two decimal places)
According to the balanced chemical equation, 1 mole of carbon is required to produce 1 mole of CH4. Therefore, the number of moles of carbon required can be calculated as follows:
Number of moles of C = 10.91 mol × 1 mol C / 1 mol CH4 = 10.91 mol (rounded to two decimal places)
We need to use the given balanced chemical equation to determine the stoichiometry of the reaction between Cu and HNO3, and then use the molar mass of HNO3 to calculate the number of moles consumed and the number of moles of water produced.
According to the balanced chemical equation, 8 moles of HNO3 react to produce 4 moles of H2O. Therefore, the ratio of moles of HNO3 to moles of H2O is 8:4, or 2:1.
Number of moles of HNO3 = 110.2 g / 63.5 g/mol = 1.737 mol (rounded to three decimal places)
Number of moles of H2O = 1.737 mol / 2 = 0.869 mol (rounded to three decimal places).
Learn more about methane here:
https://brainly.com/question/2127750
#SPJ1
Brass is an alloy of copper and zinc. The composition of a 1.00-g sample of brass is analyzed by reaction with excess 1.50 M HCl. The hydrogen gas produced is collected by water displacement. It is found to have a volume of 135 mL at 25 degrees Celsius and 772 torr. The vapor pressure of water at 25 degrees Celsius is 23.8 torr. Assume that only the zinc reacts. Determine the mass of zinc present in the brass sample.
The brass sample has 0.357 g of zinc.
What is mass?The amount of inertia a body possesses and the resistance it provides to a change in its speed or position when a force is applied are measured by a body's mass, which is a fundamental attribute of matter. It is frequently used as a gauge for how much matter makes up a body and gives it weight in a gravitational field.
The chemical formula for the interaction of zinc with hydrochloric acid is as follows:
Zn(s) + 2HCl(aq) = ZnCl2(aq) + H2(g)
One mole of zinc interacts with two moles of hydrochloric acid to create one mole of hydrogen gas, as shown by the balancing chemical equation. As a result, the amount of zinc in the brass sample and the amount of hydrogen gas produced by the reaction are equal.
The ideal gas law can be used to determine how many moles of hydrogen gas were generated:
PV = nRT
where n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and P is the total pressure of the gas.
Initially, we must adjust the hydrogen gas volume for the water vapor pressure. The gas's overall pressure is:
Total P = [tex]\rm P_ {H_2 }+ P_{H_2O}[/tex]
where [tex]\rm P_ {H_2 } \ \texte{and }\ P_{H_2O}[/tex] are the partial pressures of hydrogen gas and water vapor, respectively.
P _H2O = 23.8 torr, as we know,
[tex]\rm P _{H_2[/tex] = [tex]\rm P_ {total[/tex] - [tex]\rm P _{H2O[/tex] = 772 torr – 23.8 torr= 748.2 torr.
Converting the volume to liters (L) and the pressure to atmospheres (atm):
P = 760 torr/atm / 748.2 torr = 0.984 atm
V=135 mL / 1000 mL/L = 0.135 L
The temperature must also be converted to Kelvin:
T = 25°C + 273.15 = 298.15 K
These values are substituted into the ideal gas law to find n.
n = PV/RT = (0.984 atm) × (0.135 L) / (0.08206 L·atm/mol·K) × (298.15 K) = 0.00547 mol H2.
When one mole of zinc interacts to create one mole of hydrogen gas, the brass sample also contains 0.00547 mol of zinc.
The molar mass of zinc (65.38 g/mol) can be used to calculate the mass of zinc in the brass sample.
mass of zinc = number of moles of zinc × molar mass of zinc
= 0.00547 mol × 65.38 g/mol
= 0.357 g
As a result, the brass sample has 0.357 g of zinc.
To know more about mass, visit:
brainly.com/question/19694949
#SPJ1
describe the three phases of gastric function and how the gastric activity is activated and inhibited.
The three phases of gastric function are the cephalic phase, gastric phase, and intestinal phase.
The cephalic phase is initiated by the sight, smell, taste, or even thought of food, which activates the vagus nerve, leading to the secretion of gastric juices and enzymes.
The gastric phase is initiated by the presence of food in the stomach. The distension of the stomach walls triggers the release of gastrin, which stimulates the secretion of gastric juices and enzymes.
The intestinal phase is initiated by the presence of chyme (partially digested food) in the small intestine. The duodenum releases hormones that inhibit gastric secretions and motility and stimulate the release of digestive enzymes from the pancreas.
Gastric activity is also regulated by several factors that can activate or inhibit its function. For example, stress, smoking, and caffeine can stimulate gastric activity, while alcohol and some medications can inhibit it. Additionally, the presence of fatty or acidic foods can either stimulate or inhibit gastric function.
To learn more about gastric activity visit;
https://brainly.com/question/4757032
#SPJ4