Answer:
Explanation:
Let the molar balance numbers be your guide.
N2 has a one in front of it.
2 NH3 has a two in front of it.
Nitrogen has 5.50 moles given.
1 / 5.50 = 2 / x Cross multiply
1 x = 2 * 5.50
x = 11.0
So if you use 5.5 moles of nitrogen, you get 11 moles of NH3
The table compares vapor pressure values for water ethanol and diethyl ether Add six temperatures determine the approximate normal boiling point for each substance what do the data suggest about the relative strength of attraction between particles in each substance
Water has the strongest intermolecular forces followed by ethanol and diethyl ether has the least intermolecular forces.
From the table, we can see the vapor pressures of water, ethanol and diethyl ether. The boiling point of water is 100°C, the boiling point of ethanol is 80°C while the boiling point of diethyl ether is 40°C.
We can see that the vapor pressures and approximate normal boiling points of the substances varies with the nature of intermolecular bond forces in the molecule.
Water has highest boiling point and the lowest vapor pressure followed by ethanol. Diethyl ether has the highest vapor pressure and lowest boiling point from the data in the table.
Learn more: https://brainly.com/question/8646601
how many moles of s atoms are in 1 mol of CaSO4
I think u asked for the atoms of sulfur? its 4..
Explanation:
calcium = 4
sulfur = 4
oxygen = 4
I hope this is correct
Air is a mixture of (mostly) oxygen (molecular mass 16) and nitrogen (molecular mass 14) gases. At room temperature, which molecules in this room have more kinetic energy (on average)
The molecules of the two gases will have the same kinetic energy at room temperature.
The average kinetic energy of gaseous molecules can be calculated using the formula:
Kinetic Energy = 3/2RT, where R = constant and T = temperature in Kelvin
This means that the kinetic energy of a gaseous molecule is dependent on the temperature of the molecule only.
In other words, the molecular mass of molecules of gases has no bearing on the kinetic energy of each molecule.
More on kinetic energy of gases can be found here: https://brainly.com/question/999862
please answer, the question is attached below/above
Answer: No
Explanation: O is a recessive trait so at least there is a mutation, then no.
PLEASE ANSWER ASAP!!!
The movement of tectonic plates in two different locations is shown below:
Two blocks labeled Location A and Location B are shown. The block labeled A has a vertical line in the middle. On the left of the line there is an arrow pointing down. On the right of the vertical line there is an arrow pointing up. At Location B the top layer of the block shows two horizontal arrows pointing towards each other. The portion of this block on the right is shown moving down.
Which statement is most likely true?
Subduction occurs in both locations.
The magnetic orientation of rocks may change in Location A and subduction occurs in Location B.
Subduction occurs in Location A and the magnetic orientation of rocks may change in Location B.
Answer: its a and b
Explanation:its very simple and the reason is bc yea
Answer:
B
Explanation:
The answer is B because it said subduction i guess. And I got it right! Hope this helps to anyone that is looking at this!
What is vibration????
cm 5. Express the result of adding 856.6g and 23.86g to the correct number of significant figures.
Answer:
880.5
Explanation:
Express the result of adding 856.6g and 23.86g to the correct number of significant figures.
856.6 +23.86 = 856.6 + 23.9 = 880.5
The result of adding 856.6 g and 23.86 g after rounding off to correct significant figures is 856.6 + 23.9=880.5.
What are significant figures?Significant figures are used for establishment of a number which is presented in the form of digits. These digits give a meaningful representation to the numbers.
The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:
1)All non-zero digits are significant .
2)All zeroes which occur between non-zero digits are significant.
3)All zeroes to the left and right of a non-zero digit are not significant.
4) All zeroes on right of decimal are significant if a non-zero number follows them.
5)All zeroes on right side of non-zero digit are significant.
Learn more about significant figures,here:
https://brainly.com/question/29153641
#SPJ2
Can anyone help me with this question?
sure i can help
so u have to ask someone else
Airflow through a long 0.2m square air conditioning duct maintained the outer duct surface temperature at 10degree.if the horizontal duct is uninsulated and exposed to air at 35degree in the crawl space beneath at home.
What is the heat gain per unit length of the duct.
Answer:
125°C/m
Explanation:
The difference in temperature will be:
35 - 10 = 25
The outer duct surface is heated 25°C by the air from 10°C to 35°C;
This heat gain is simply divided by 0.2m to get heat gain per unit length:
25/0.2 = 125
125°C/m
If you're American, this will be °F I believe, so the answer will be:
125°F/m
plz help someone thx
Answer:
Glycerin
Explanation:
The stronger the intermolecular forces of attraction the more energy is required to break those forces, if you need more energy to break these forces it means that these certain elements would have a higher boiling point. Which is why the answer is Glycerin, the highest boiling point of an element means that it has the strongest forces, which in this case is electrostatic forces.
Answer:
Glycerin
Explanation:
How much heat is required to increase the temperature of 150 g of water from
38°C -55°C?
Answer:
-55°C
Explanation:
Bwcause 38°C is gonna make it colder so thats why you should use that.
Help pretty please :)
(50 POINT) use this to answer: https://phet.colorado.edu/sims/html/acid-base-solutions/latest/acid-base-solutions_en.html
Describe how you could adjust the settings of the simulation to increase the number of red (H3O+) and blue (A-) particles in the solution of equilibrium. In three to four sentences, justify your answer and explain how and why this would change the pH of the solution.
The addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.
What is an acid-base titration?An acid-base titration is one in which an acid is added to a given volume of base in order to neutralize it.
When more of acid is added to a solution of a base than is required to neutralize it, the solution becomes acidic.
Similarly, when more base is use to neutralize an acid than is required, the solution becomes alkaline.
In the given simulation, (H3O+) is the acid while (A-) is the base.
By adding increasing the quantity of acid added, the number of H3O+ particles will increase. This will reduce the pH of the solution.
Also, the adding more base to the solution, the number of A- particles in the solution will increase. This will increase the pH of the solution.
Therefore, addition of more acid or base will increase the number of H3O+ and A- particles thereby decreasing and increasing the pH of the solution respectively.
Learn more about acid-base titration at: https://brainly.com/question/3508933
Why is there an octet rule in writing Lewis structures?
Answer:
Before we can sketch the Lewis structures of molecules, we must first understand the octet rule. The octet rule asserts that when atoms combine to create compounds, electrons are gained, lost, or shared among them, resulting in a stable electron configuration defined by eight valence electrons as a result. These rules are used in conjunction with the main-group components of the second period.
Explanation:
Hope it helps:)
Which of the following solutions represents a good buffer system? a solution that is 0.10 mol L-1 NaOH and 0.10 mol L-1 KOH a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 NH4+ a solution that is 0.10 mol L-1 HF and 0.10 mol L-1 CH3COONa a solution that is 0.10 mol L-1 HCl and 0.10 mol L-1 KCl a solution that is 0.10 mol L-1 CH3COOH and 0.10 mol L-1 CH3COOLi
Answer:
chu papi
Explanation:
a peanut butter and jelly sandwich contains 9.00 g of fat, 6.00 g of protein, and 25.0 g of carbohydrate. How many calories does this sandwich provide?
Answer:
205 calories.
Explanation:
According to the USDA, "Carbohydrates provide 4 calories per gram, protein provides 4 calories per gram, and fat provides 9 calories per gram." 9 grams of fat at 9 calories per equals 81 calories + 6 grams of protein at 4 calories per gram which equals 24 calories + 25 grams of carbohydrate at 4 calories per gram which is equal to 100 calories.
Total that all up and you get 81 cal + 24 cal + 100 cal=205 calories.
I don't know what kind of course this is for, but if they are incredibly picky, what we refer to as "calories" are actually kilocalories, which are equal to one thousand "real" calories each. However, I'm very confident that the correct answer is 205 calories.
The sandwich will provide 205 calories.
What is calories?A calorie is an energy unit. It's the quantity of heat needed to increase the temperature of one gramme of water by [tex]1^{0} C[/tex] at one atmosphere of pressure.
Its is given that, Fat = 9 g, protein = 6 g, carbohydrate = 25 g.
It is known that, fat contains 9 calories / gram , carbohydrate contains 4 calories / gram and protein contains 4 calories / gram.
Now, adding all terms.
Total calories = (9×9) +(6×4) +(25×4)
= 205 calories.
Therefore, the sandwich will provide a total of 205 calories.
To know more about calories
https://brainly.com/question/22374134.
#SPJ2
Why were people from lower castes drawn to Buddhism?
O The Buddhist belief in equality appealed to them.
O Buddhism allowed people from all castes to participate.
People from the lower castes were born into Buddhism.
O People in the lower castes wanted to choose their own religi
Answer:
During the Maurya empire, the Indian culture and way of life were deeply influenced by Buddhism. Buddhism appealed to people of lower castes because it emphasized individuals' path to enlightenment and salvation, which could be attained in this life.
Explanation:
How many molecules of oxygen can be made from 9.52g of nickel (III) oxide?
Answer:
165.385 g/mol
If you need to design a technological solution to lack of water availability in a developing country, which of the following should you do before proposing a solution? invest the money to test your most promising design select the best of several possible designs build a model to test research scientific principles involved in water availability
Anwser:
Research scientific principles involved in water availability.
Explanation:
Before building or investment you always want to see and know what your up against and what the best way to help or solve is. Researching why there's a problem in water availability or/and the principals to water availability will help you see what the problem is with what's happening to and around the process and it's environment.
Help with this please
Answer:
12
Explanation:
There are 4 sulfur atoms in SO4
4×3=12
This means that it turns into 3×(SO4)
=3SO4
How many carbon (C) atoms are in C3Hg? A. 8 B. 5 C. 1 D. 3
Answer:
the answer is D
Calculate the mass of butane needed to produce 57.3 g of carbon dioxide.
Answer:
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
[tex]tex]\purple{\rule{45pt}{7pt}}\blue{\rule{45pt}{999999pt}}[/tex]
What is the charge on an electron?
Answer:
Negative Charge
Explanation:
hidrógeno
notacion electronica
Answer:
Hydrogen
Electronic notation
Explanation:
What statement describes how water is involved in weathering a rock?
Answer:
Water, in either liquid or solid form, is often a key agent of mechanical weathering. For instance, liquid water can seep into cracks and crevices in rock. If temperatures drop low enough, the water will freeze. ... Changes in temperature cause rock to expand (with heat) and contract (with cold).
Answer:
the rock has been rubbed away at for hundreds or thousands of years and the water steady washed the rock away. hope this helped.
which of the following statements is true?
just look at the picture
c
Explanation:
compounds are combine from two or more elements
Which of the following do not have angular momentum? Choose all that apply: O A. A spinning planet O B. A boy sleeping in bed O C. A ball sitting in a garbage can O D. A Ferris wheel in motion
Answer:
The answer is A and B
Explanation:
Hey! Help please :)
Answer:
6. 15 oxygen atoms (The coefficient 5 is multiplied by the subscript 3 of oxygen)
7. The number "2" is the subscript.
Dirty water is a _____.
mixture
or
compound ?
Answer: mixture
Explanation: they are heterogeneous mixtures not homogeneous
It's Mixture
Reason:- Dirty water is a mixture of dirt and water. Mixture are made up of 2 or more different substance with different characteristics
8) Structures that regulate which molecules,
nutrients, and substances enter the cell are
A) Genes
B) Endoplasmic Reticulum
C) Cell Membranes
D) Centrioles