Answer:
Brainliest pls
Explanation:
Theoretical yield = 0.1 g
Percent yield = 80%
When is the small size of gas particles taken into account?
No bots!
Answer:
At high pressures and low temperatures.
Explanation:
That's when the volume of the gas is quite small.
The volume of the gas particles can then be a significant proportion of the total volume.
Answer:
At high pressure and low temperature.
Explanation:
Remember how ideal gases behave under high temperatures and low pressure.
So the opposite would be when gas particles are taken into account.
If the carbon atom of each of the incoming CO2 molecules is labeled with a radioactive isotope of carbon, which organic molecules will be radioactively labeled after one cycle
Answer:
B, C, D, and E
Explanation:
What is the residue when the reaction mixture is filtered
Answer:
Filtration can be used to separate an insoluble solid from a liquid, or a precipitate from the reaction mixture in which it formed. The solid which collects in the filter paper is called the residue. The clear liquid which passes through the filter paper is called the filtrate.
Explanation:
i had this question before
When calcium carbonate is heated, it breaks down into calcium oxide and carbon dioxide.
CaCO3(s) →CaO(s) + CO2(g)
You heat 2.0 moles CaCO3.
How many moles of carbon dioxide(CO2) will you make?
A) 4 moles CO2
B) 2 moles CO2
C) 1 mole CO2
D) 0.50 moles CO2
Which ion was formed by providing the second ionization energy to remove an electron? ca2 n3– fe3 s2–
Ca²⁺
________________
ca2! Have a nice day!
The radioactive element francium undergoes a series of nuclear decays, eventually forming a stable isotope of lead. One part of the process involves
francium-221 undergoing two alpha decays, followed by a beta decay.
The element formed after this portion of the decay series is
213,84Po. This is further explained below.
What is the element formed after this portion of the decay series?Generally, when the radioactive element francium undergoes a series of nuclear decays the sum of the mass number, the atomic number, and decay particles are equal.
In conclusion, francium-221 decays to to its first beta decay to give 213,84Po
Read more about Atom
https://brainly.com/question/13981855
CQ
The radioactive element francium undergoes a series of nuclear decays, eventually forming a stable isotope of lead. One part of the process involves francium-221 undergoing two alpha decays, followed by a beta decay. What is the element formed after this portion of the decay series? (In the box below, type in the symbol using the isotope tool. An example for carbon-12 is provided.)
Practice: Isotope Calculations #2 worksheet
Iotopes of elements are atoms of the same element which differ in their mass numbers due to differences in neutron number in the nucleus.
What are isotopes?Isotopes are atoms of an element which have the same atomic number but different mass numbers.
The difference in mass number is due to difference in number of neutrons in the nucleus of the atom.
The data of the given isotopes of elements are as follows:
[tex]^{24}Na, Na-24, 11, 24, 11, 12, 11[/tex]
[tex]^{32}O, O-32, 16, 32, 16, 16, 16[/tex]
[tex]^{44}Ca, Ca-44, 20, 44, 20, 24, 20[/tex]
[tex]^{24}Mg, Mg-24, 12, 24, 12, 12, 12[/tex]
[tex]^{64}Zn, Zn-64, 30, 64, 30, 34, 30[/tex]
[tex]^{207}Pb, Pb-207, 82, 207, 82, 125, 82[/tex]
[tex]^{238}U, U-238, 92, 238, 92, 146, 92[/tex]
[tex]^{129}Te, Te-129, 52, 129, 52, 77, 52[/tex]
[tex]^{19}F, F-19, 9, 19, 9, 10, 9[/tex]
Therefore, isotopes of elements differ in their mass numbers.
Learn more about isotopes at: https://brainly.com/question/14220416
Answer:
2,4, 7, Ng, N, P 6,9
Explanation:
Why does benzocaine precipitate during neutralization?.
Explain why benzocaine precipitates during the neutralization.
With the addition of an acid, the amine group on the benzocaine will become protonated. The protonation creates a positive charge on the benzocaine molecule. Because of this, benzocaine will become soluble in a polar solvent. However, when the solution is returned to a more basic pH level, the amine will no longer be protonated. Thus, the benzocaine will no longer be soluble and will precipitate during neutralization.
How are polypeptides and proteins similar?
Answer:
C.
Explanation:
The diagram below shows the branching tree diagram for humans. The text box below it shows the set of derived shared characteristics for the branching tree.
A slanting, horizontal line is shown. On the extreme left, there is a label that says Common Ancestor. Along the slanting, horizontal line there are five dots labeled from left to right as 1, 2, 3, 4, and 5. There is one vertical line between each of the consecutive five dots. The lines are labeled from left to right as Perch, Frog, Pigeon, Rats, and Human. A text box below the branching tree diagram is labeled Derived Shared Characteristics. In the box it says from left to right, Terrestrial during all stages, Jaws, Walking on two legs, Mammary glands and hair, and Four limbs.
Look at the possible derived shared characteristics, shown in the text box. Think about where these should be placed along the branching tree diagram. From the text box, select a shared derived characteristic that humans and rats have. Explain why you think humans and rats share this characteristic.
Answer:
I would write "terrestrial/lives on land during all life stages" between the frog and pigeon branches
Explanation:
Jaw evolution has started with fish, so i'd place that before the perch, evolution of four limbs is next and I would plate it between the perch and the frog. Evolution of an egg has ensured that organisms remain terrestrial during all stages of life and don't need to rely on water to lay their eggs. So I would place that between the frog and the pigeon. True mammary glands and true hair, as we know it formed on mammals so i'd place that between the pigeon and the rats (although synapsids evolved similar structures long before birds even existed). And lastly, I would place "walking on two legs" between rats and human branches. Because our ancestors evolved bipedalism relatively late.
If the pressure is low enough, the boiling point and the melting point of water can be equal. What is this point called? Do you think this point can exist for substances other than water? Explain your reasoning.
Answer:
This is called "evaporation" when a liquid is boiling hot, it starts to evaporate. That is how clouds form! Every liquid is able to evaporate because when it's heated up, it turns into gas. That gas is vapor.
Explanation:
common sense
a
a
4. Suppose the temperature inside a sealed container increases. How do you
expect this change to affect the partial pressure of each gas in a mixture of
gases inside the container? How does it affect the total pressure?
Answer:
The volume of the system will change and maybe the shape of the system boundary
Determine the volume of 0.107 M NaOH required to reach halfway to the stoichiometric point of the titration.
Answer:
Need more information to solve! What is the analyte? Its concentration?
Explanation:
A mixture of two gases with a total pressure of 8.00 atm contains 0.60 atm of Gas A. What is the partial pressure of Gas B
Answer:
Pt = Total pressure, Pa = Gas A and Pb = Gas B
Pt = Pa + Pb
Pt - Pa = Pb
Explanation:
Pb = Pt - Pa
Pb = 8.00 atm - 0.60 atm
Pb = 7.4 atm
The total pressure of a gaseous mixture is the sum of pressure of its component gases. Thus the partial pressure of gas B in the mixture of total pressure 8 atm containing 0.60 atm A is 7.4 atm.
What is partial pressure ?Partial pressure of a component gas in a mixture of gases is the contribution of that gas to the overall pressure or total pressure of the mixture.
Let the a mixture contains n number of gases and each with a pressure of P1, P2 etc.Then the total pressure be written as follows:
[tex]\rm P_{total} = \sum P_{i} = \sum P_{1} + P_{2}+ P_{3} .....[/tex]
Here the mixture containing gas A and B with partial pressure Pa and Pb. The total pressure of the gas is given 8 atm and Pa is given 0.60 atm . Thus,
[tex]\rm P_{total} = P_{a} + P_{b}[/tex]
8 atm = 0.60 + Pb
Pb = 8 - 0.6 = 7.4 atm.
Hence, the partial pressure of gas B os 7.4 atm.
To find more about partial pressure, refer the link below:
https://brainly.com/question/15075781
#SPJ5
Which best represents the reaction of calcium and zinc carbonate (znco3) to form calcium carbonate (caco3) and zinc? ca → znco3 caco3 → zn ca znco3 → caco3 zn caco3 zn → ca znco3 caco3 zn ca → znco3
The equation which best describes the reaction of calcium and zinc carbonate to form calcium carbonate and zinc is Ca+ZnCO₃→CaCO₃+Zn.
What is chemical reactions?Chemical reactions are those reactions in which one or more reactants combine with each other for the formation of new product.
In the question it is mention that calcium reacts with zinc carbonate for the formation of calcium carbonate and zinc in the following manner:
Ca + ZnCO₃ → CaCO₃ + Zn
All reactions rather than the above reaction is incorerct as in that proper combination of molecules are not given.
Hence required chemical reaction is Ca + ZnCO₃ → CaCO₃ + Zn.
To know more about chemical reactions, visit the below link:
https://brainly.com/question/1222323
Answer:
to keep it short it’s B;)
Explanation:
How to keep chocolate covered strawberries from sweating?.
Answer: by putting them in the freezer
Explanation:
Note 3 key dates in blood spatter history and what those dates mean to evidence today
The question relates to Blood Splatter Analysis and relates to both law and Forensic science.
What are the three key dates in Blood Splatter History?
The three key dates in Blood Splatter History and what those dates mean to evidence today are:
Learn more about Blood Spatter Analysis at:
https://brainly.com/question/27322497
How much energy is given off by the following reaction, if 162.5 g of oxygen reacts with excess ammonia (NH3)? 4 NH3 + 5 O2 + 4 NO + 6 H2O AH = -1225.6 kJ
From the enthalpy values, 1244.8 kJ of heat is given off when 162.5 g of oxygen reacts with excess ammonia.
What is the amount of heat given off in a reaction?The amount of heat given off in a reaction is known as enthalpy change.
Heat is given off in an exothermic reaction.
From the enthalpy value of the given reaction, 1225
6 kJ of heat is given off when 5×32 g or 160 g of oxygen reacts with ammonia.
Amount of heat given off when 162.5 g of oxygen reacts with excess ammonia is;
Heat given off = 1225.6 kJ × 162.5/160 = 1244.8 kJ
Therefore, 1244.8 kJ of heat is given off when 162.5 g of oxygen reacts with excess ammonia.
Learn more about enthalpy at: https://brainly.com/question/14047927
#SPJ1
Which term describes this reaction? 2 central carbons double bonded to each other, with h above right and left and below right and left plus upper c l single bond upper c l right arrow 2 central c single bonded to each other; each is single bonded to upper c l above, and to h below and to the outside. addition condensation elimination substitution
Answer:
Which term best describes this reaction?
CH₃ H ┌ CH₃ H ┐
│ │ │ │ │ │
n C ═ C ➝ ├ C ── C ┤
│ │ │ │ │ │
H H └ H H ┘
❌ A) condensation polymerization
✔️ B) addition polymerization❌ C) hydrohalogenation
❌ D) hydration
I Took Question Test And Have Nice Day.
Answer:
The best answer out of the 4 Would be A. Addition
Explanation:
I took the Test.
Explain the various factors that impact the solubility of substances in water.
Answer:
There are two direct factors that affect solubility: temperature and pressure.
Explanation:
Temperature affects the solubility of both solids and gases.
Pressure only affects the solubility of gases
TIME REMAINING
16:31:41
What is the name of the hydrocarbon CH3(CH2)6CH3?
butane
decane
octane
propane
Answer:
octane is the answer have a good day
15. The specific heat of silver is 0.24 J/g*^ 0 C How many joules of energy are needed to warm 4.37 g of silver from 25.0C to 27.5 degrees * C ? 0.14 J 46 J 0.022 J
2.62J of energy will be required to warm a silver metal from a temperature of 25°C to 27.5°C.
How to calculate joules?The energy required in a calorimetry can be calculated using the following formula:
Q = m × c × ∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of substancec = specific heat capacity∆T = change in temperatureAccording to this question, 4.37 g of silver should be heated from 25°C to 27.5°C. The heat required is as follows:
Q = 4.37 × 0.24 × (27.5 - 25)
Q = 1.0488 × 2.5
Q = 2.62J
Therefore, 2.62J of energy will be required to warm a silver metal from a temperature of 25°C to 27.5°C.
Learn more about energy at: https://brainly.com/question/1932868
The burning of magnesium is a highly exothermic reaction. How many kilojoules of heat are released when 0. 75 mol of Mg burn in an excess of O2?
2Mg(s) + O2(g) → 2MgO(s) + 1204 kJ
Taking into account the definition of enthalpy of a chemical reaction, the quantity of heat released when 0.75 moles of Mg are burned is 451.5 kJ.
Enthalpy of a chemical reactionThe enthalpy of a chemical reaction is known as the heat absorbed or released in a chemical reaction when it occurs at constant pressure. That is, the heat of reaction is the energy that is released or absorbed when chemicals are transformed into a chemical reaction.
The enthalpy is an extensive property, that is, it depends on the amount of matter present.
Heat released in this caseIn this case, the balanced reaction is:
2 Mg(s) + O₂ (g) → 2 MgO(s) + 1204 kJ
This equation indicates that when 2 moles of Mg reacts with 1 mole of O₂, 1204 kJ of heat is released.
When 0.75 moles of Mg are burned, then you can apply the following rule of three: if 2 moles of Mg releases 1204 kJ of heat, 0.75 moles of Mg releases how much heat?
[tex]heat=\frac{0.75 moles of Mgx1204 kJ}{2 moles of Mg}[/tex]
heat= 451.5 kJ
Finally, the quantity of heat released when 0.75 moles of Mg are burned is 451.5 kJ.
Learn more about enthalpy of a chemical reaction:
brainly.com/question/15355361
brainly.com/question/16982510
brainly.com/question/13813185
brainly.com/question/19521752
How fast is the wind have to blow to be classified as a hurricane?
74 mph (64 KT)
Explanation:
when the wind exceeds 74 mph (64 KT), the storm is considered to be a hurricane.
A welding torch produces a flame by burning acetylene fuel in the presence of oxygen. the energy released from the acetylene fuel is then used to melt a metal. which energy transformation happens during this process? chemical energy turns into thermal energy. kinetic energy turns into potential energy. thermal energy turns into electromagnetic energy. potential energy turns into chemical energy.
A welding torch produces a flame by burning of acetylene fuel then energy released from the acetylene fuel is then used to melt a metal, so transformation of chemical energy into thermal energy takes place.
What is transfer of energy?Energy neither can be produced nor destroyed but it only transfers from one form to other form.
In the question it is given that, burning of acetylene produces energy and this produced energy is a type of chemical energy and then this is used as a thermal energy for the melting of metal.
So conversion of kinetic energy to potential energy, thermal energy to electromagnetic energy and potential energy to chemical is wrong.
Hence transformation of chemical energy into thermal energy takes place.
To know more about transformation of energy, visit the below link:
https://brainly.com/question/14754310
Answer:
A welding torch produces a flame by burning of acetylene fuel then energy released from the acetylene fuel is then used to melt a metal, so transformation of chemical energy into thermal energy takes place.
What is transfer of energy?
Energy neither can be produced nor destroyed but it only transfers from one form to other form.
In the question it is given that, burning of acetylene produces energy and this produced energy is a type of chemical energy and then this is used as a thermal energy for the melting of metal.
So conversion of kinetic energy to potential energy, thermal energy to electromagnetic energy and potential energy to chemical is wrong.
ANSWER IS (D)
Explanation:
What enzyme performs an isomerization reaction carried out by dehydration and hydration steps and contains a 4Fe-4S cluster that is involved in substrate binding
Aconitate hydratase is the enzyme which performs an isomerization reaction carried out by dehydration and hydration steps.
What is an Enzyme?These are proteins which serves as biological catalyst thereby accelerating the rate of chemical reaction.
This enzyme catalyses the stereo-specific isomerization of citrate to isocitrate and contains a 4Fe-4S cluster that is involved in substrate binding.
Read more about Aconitate hydratase here https://brainly.com/question/9423343
#SPJ1
Write a two to four sentence conclusion statement explaining how the potential energy diagram is used to identify if the reaction is endothermic or exothermic, if heat was released or absorbed, and why the sign of enthalpy change was positive of negative. There should be a conclusion statement for each graph.
Answer:
The Heat of a reaction is given as the heat content/heat of formation/enthalpies of the products minus the heat content/heat of formation/enthalpies of the reactants. If the potential energy diagram has the product(s) having a higher potential energy than the reactant(s), then the reaction is an endothermic reaction (this is why the reaction absorbs heat from the surroundings to try to make up for the lack of potential energy of the reactants) and the sign on the enthalpy change is visibly positive since H(products) > H(reactants) If the potential energy diagram has the reactant(s) having a higher potential energy than the product(s), then the reaction is an exothermic reaction (this is why the reaction releases heat to the surroundings to try to take care of the higher potential energy of the reactants) and the sign on the enthalpy change is visibly negative since H(reactants) > H(products).
Explanation:
hope it helps:)
The Ksp of barium sulfate (BaSO4) is 1.1 × 10–10. What is the solubility concentration of sulfate ions in a saturated solution at 25°C?
1.5 × 10–5M
1.0 × 10–5M
5.5 × 10–11M
7.4 × 10–6M
Answer:
Your answer would be:
B.) 1.0 × 10–5M
Explanation:
Have a great rest of your day
#TheWizzer
Answer:
The answer is B.
Explanation:
pretty quite, when everyones acc gets deleted SMH -;-
How many Hydrogen moles needed to get the energy to equal 1 mol of gasoline?
Answer:
1 grams Hydrogen is equal to 0.992122546977 mole.
Explanation:
Hydrogen is equal to 0.992122546977 mole.
Behavioral changes of individuals of a species that allow for better survival. (Acquired traits)
Incorrect Chlorophyll?
Natural selection is the process that selects the organism that can survive and reproduce in an altered environment. These behavioral changes are adapted.
What is adaptation?Adaptation is the part of natural selection and a trait that allows the improved organism to survive and reproduce in environmental conditions.
The adapted organism can survive and reproduce in the changed environmental conditions by the process of natural selection.
Therefore, adaptation allows for better survival through behavioral changes in individuals.
Learn more about adaptation and natural selection here:
https://brainly.com/question/1288721
#SPJ1