How much current, in amperes, is in a lightning stroke that lasts 0. 05 second and transfers 100 coulombs

Answer:

The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.

Explanation:

The Greenhouse Gas Equivalencies calculator allows you to convert emissions or energy data to the equivalent amount of carbon dioxide (CO2) emissions from using that amount. The calculator helps you translate abstract measurements into concrete terms you can understand, such as the annual emissions from cars, households, or power plants. This calculator may be useful in communicating your greenhouse gas reduction strategy, reduction targets, or other initiatives aimed at reducing greenhouse gas emissions.

Answer:

An example would be, “If I grow grass seeds under green light bulbs, then they will grow faster than plants growing under red light bulbs.” Experiment – The fun part!

Explanation:

have a nice day.

The index of refraction for the new medium is 1.2. The index of refraction is a measure of how much the speed of light is slowed down as it passes through a material.

It is defined as the ratio of the speed of light in a vacuum to the speed of light in the material. The formula for the index of refraction is:

n = c/v

where n is the index of refraction, c is the speed of light in a vacuum (approximately 3 x [tex]10^{8}[/tex] m/s), and v is the speed of light in the material.

In this case, we are told that the speed of light in the new medium is 2.5 x [tex]10^{8}[/tex] m/s. Plugging this into the formula, we get:

n = c/v

n = 3 x [tex]10^{8}[/tex] m/s / 2.5 x [tex]10^{8}[/tex] m/s

n = 1.2

Therefore, the index of refraction for the new medium is 1.2.

To know more about index of refraction, refer here:

https://brainly.com/question/23750645#

#SPJ11

To graphically determine the acceleration due to gravity near Earth's surface using a sphere in simple harmonic motion, the students can follow these steps:

1. Set up the Experiment:

  - Attach the sphere to one end of the string.

  - Attach the other end of the string to the ring stand, allowing the sphere to hang freely.

  - Ensure that the sphere is not touching any other objects and has enough clearance to swing back and forth.

2. Measure the Period:

  - Use a stopwatch or a timer to measure the time it takes for the sphere to complete one full oscillation (swing back and forth).

  - Repeat this measurement multiple times to get accurate and consistent results.

3. Measure the Length:

  - Measure the length of the string from the point of suspension (ring stand) to the center of the sphere.

  - Ensure that the measurement is taken from the resting position of the sphere, not when it is swinging.

4. Calculate the Acceleration due to Gravity:

  - The period of simple harmonic motion (T) is related to the acceleration due to gravity (g) and the length of the pendulum (L) through the formula: T = 2π√(L/g).

  - Rearrange the formula to solve for g: g = (4π²L) / T².

  - Substitute the measured values of the period (T) and length (L) into the formula to calculate the acceleration due to gravity (g).

5. Repeat for Different Lengths (Optional):

  - If time and resources permit, the students can repeat the experiment with different lengths of the string.

  - By measuring the period (T) and length (L) for different setups, they can collect multiple data points to create a graph and further analyze the relationship between period and length.

6. Graphical Analysis:

  - Plot the period (T) on the x-axis and the corresponding calculated acceleration due to gravity (g) on the y-axis.

  - Use the data points obtained from the experiment to create a graph.

  - The slope of the graph represents the square of the reciprocal of the acceleration due to gravity (1/g²), allowing the students to determine the acceleration due to gravity near Earth's surface.

To know more about acceleration refer here

https://brainly.com/question/9415862#

#SPJ11

Answer:

The Average kinetic Energy of all the atoms and molecules of substance

Explanation:

The measure of angle BXC is 48°.

To find the measure of angle BXC. Let's elaborate on the process.

In the given scenario, we have angle AXB measuring 132° and angle AXC measuring 180°. To find the measure of angle BXC, we subtract the measure of angle AXB from angle AXC.

angle BXC = angle AXC - angle AXB

Substituting the given measures, we have:

angle BXC = 180° - 132°

Now, performing the subtraction:

angle BXC = 48°

Therefore, the measure of angle BXC is 48°.

This method relies on the fact that the sum of the angles in a triangle is always 180°. Since angle AXC is a straight angle (measuring 180°) and angle AXB is a known angle (measuring 132°), subtracting angle AXB from angle AXC gives us the measure of angle BXC.

By using this subtraction, we determine that angle BXC measures 48°.

It's important to remember that angle measures can be added or subtracted to find unknown angles or relationships between angles. In this case, subtracting the known angle AXB from the known angle AXC allowed us to find the measure of angle BXC.

To learn more about angle, refer below:

https://brainly.com/question/28451077

#SPJ11

The amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.

Before the collision:
- The first block

(mass m1 = 0.45 kg) is at its maximum extension

(amplitude A1 = 0.075 m) and has zero velocity.
-

The second block

(mass m2 = 0.45 kg) is moving at a velocity

v2 = 12 m/s and has no potential energy.

During the collision, the two blocks stick together

(mass m = m1 + m2 = 0.9 kg).

After the collision, the combined mass oscillates with a new amplitude A2.

Before collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA1^2
- Momentum of the system = m2 * v2

After collision:
- Mechanical energy of the system = Potential energy of the spring = (1/2)kA2^2
- Momentum of the system = m * v

Since mechanical energy and momentum are conserved:
- (1/2)kA1^2 = (1/2)kA2^2
- m2 * v2 = m * v

We know A1, m1, m2, and v2. We can solve the equations to find A2.

From the energy equation:

A2^2 = A1^2 * (m1 + m2) / m1 = (0.075^2) * (0.9 / 0.45) = 0.01125

A2 = sqrt(0.01125ou) ≈ 0.106 m

So, the amplitude of the resulting oscillation is approximately 0.106 meters or 10.6 cm.

To learn more about : Amplitude

https://brainly.com/question/3613222

#SPJ11

Answer:

85 cm

Explanation:

The speed of the blocks right after the collision is 6 m/s, so now we have an oscillator of mass 900.0 g with a speed of 6 m/s when x = 7.5 cm. The amplitude of this oscillator is 85 cm

Avogadro's hypothesis confirms that hydrogen and oxygen gases react in a 2:1 ratio to form water, as two moles of hydrogen gas react with one mole of oxygen gas to produce two moles of water vapor.

Regarding the case of hydrogen and oxygen gases, we can apply Avogadro's hypothesis to prove that they react in a 2:1 ratio to form water. According to the hypothesis, one mole of any gas contains the same number of particles, which is equal to Avogadro's number. Therefore, if we take equal volumes of hydrogen and oxygen gases at the same temperature and pressure, they will contain the same number of particles.

In the case of the reaction between hydrogen and oxygen, one mole of hydrogen gas reacts with one-half mole of oxygen gas to produce one mole of water. This reaction equation implies that two volumes of hydrogen gas react with one volume of oxygen gas to form two volumes of water vapor.

Since the gases are at the same temperature and pressure, their volumes are directly proportional to their moles. Thus, two volumes of hydrogen gas will contain twice as many particles as one volume of oxygen gas. Therefore, two moles of hydrogen gas react with one mole of oxygen gas to form two moles of water vapor.

Avogadro's hypothesis states that equal volumes of gases at the same temperature and pressure contain the same number of particles. This concept has several applications in chemistry, including in the calculation of molar volumes and molar masses of gases.

To learn more about Avogadro's hypothesis

https://brainly.com/question/20358713

#SPJ4

Complete question:

What are the applications of Avogadro's hypothesis, and how can it be used to prove the combination of hydrogen and oxygen gases?

All of the following are active listening skills and intercultural communication skills used in the classroom except (d).Making sure students look you in the eye is correct option.

Making sure students look you in the eye is not an intercultural communication skill or an example of active listening. It is a behaviour that might be culturally distinctive or a matter of desire, but it does not always advance productive dialogue or comprehension in the classroom.

Components of effective communication include: skills in verbal and nonverbal communication, active listening, saying no, and resolving conflicts. Effective communication means being able to express your needs, wants, and dislikes to another person without causing conflict or tension.

A few components of effective communication are as follows: communicating both orally and nonverbally, talents in active listening, refusal, and conflict resolution

Therefore the correct option is (d).

To know more about communication

https://brainly.com/question/3056216

#SPJ4

Based on scientific understanding, the other side of the event horizon of a supermassive black hole, like the one at the center of our galaxy, is expected to be an extremely high-gravity region where space and time are significantly distorted.

Beyond the event horizon, matter is inexorably pulled towards the singularity, which is a point of infinite density. Unfortunately, our current understanding of physics does not allow us to predict what lies beyond the singularity or inside the black hole.

Based on our current understanding of general relativity, the theory proposed by Albert Einstein to describe gravity, the other side of the event horizon of a supermassive black hole is expected to be an incredibly high-gravity region.

Space and time become significantly distorted in this region, leading to unusual phenomena such as the stretching of space and the slowing of time. These effects are a consequence of the intense gravitational field near the black hole.

Inside the event horizon, matter and energy are inexorably pulled towards the black hole's singularity. The singularity is a point of infinite density, where the mass of the black hole is concentrated. At the singularity, our current understanding of physics breaks down, and the laws of physics as we know them no longer apply.

This is primarily because the tremendous gravitational forces and the extreme conditions near the singularity require a theory of quantum gravity to accurately describe them.

Unfortunately, such a theory currently eludes scientists, and our understanding of what lies beyond the singularity remains limited.

To learn more about density, refer below:

https://brainly.com/question/29775886

#SPJ11

When the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas will decrease. This relationship between volume, pressure, and temperature is described by Boyle's law, which states that the pressure of a gas is inversely proportional to its volume, at constant temperature.

Here's how increasing the volume of a gas can lead to a decrease in pressure:

1. Gas molecules have kinetic energy: Gas molecules are in constant random motion and have kinetic energy. When gas is contained in a smaller volume, the gas molecules collide more frequently with the walls of the container, resulting in higher pressure.

2. Decreased number of collisions: When the volume of the container is increased, the gas molecules have more space to move around, and the frequency of collisions with the walls of the container decreases. This reduction in collisions leads to a decrease in pressure.

3. Decreased concentration of gas molecules: Increasing the volume of a gas container also leads to a decrease in the concentration of gas molecules in the container. This means that there are fewer gas molecules per unit of volume, resulting in lower pressure.

4. Decreased force per unit area: When the volume of the container is increased, the same number of gas molecules now occupy a larger volume, resulting in a lower force per unit area exerted by the gas molecules on the walls of the container. This lower force per unit area leads to a decrease in pressure.

Therefore, when the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas decreases due to the decreased number of collisions, decreased concentration of gas molecules, and decreased force per unit area exerted by the gas molecules on the walls of the container. This relationship is described by Boyle's law, which is an important principle in the study of gases.

To learn more about Boyle's law click:

https://brainly.com/question/30367133

#SPJ1

The correct answer is C. Yes because it involves radioactive decay.

The given equation shows a transmutation reaction where a helium nucleus (He) collides with a target nucleus (yA) to form a new nucleus (y+2A) and a gamma ray is emitted. The emission of gamma rays is a characteristic of radioactive decay, which occurs during the process of transmutation.

In transmutation reactions, the number of atoms and nucleons may or may not be conserved, so options B and D are incorrect. The emission of gamma rays signifies that the new nucleus is in an excited state and is emitting energy to reach a more stable state. This is a clear indication of radioactive decay and hence option A is also incorrect.

To summarize, the given equation involves transmutation as a result of a collision between two nuclei, and the emission of gamma rays indicates radioactive decay, thereby leading to the conclusion that transmutation has taken place.

Know more about radioactive decay here:

https://brainly.com/question/9151947

#SPJ11

The maximum velocity of a particle on the string is approximately 0.98 m/s.

To find the maximum velocity of a particle on the string, we can use the given tension, linear density, amplitude, and wavelength values.

Given:

- Tension (T) = 55.0 N

- Linear density (μ) = 4.70 g/m = 0.00470 kg/m (converted to kg/m)

- Amplitude (A) = 3.00 cm = 0.03 m (converted to meter)

- Wavelength (λ) = 2.10 m

First, we can find the wave speed (v) using the equation v = √(T/μ):

v = √(55.0 N / 0.00470 kg/m) ≈ 34.66 m/s

Next, we can find the angular frequency (ω) using the equation ω = 2πv/λ:

ω = (2π * 34.66 m/s) / 2.10 m ≈ 32.74 rad/s

Finally, we can find the maximum velocity of a particle on the string (v_max) using the equation v_max = Aω:

v_max = 0.03 m * 32.74 rad/s ≈ 0.98 m/s

So, the maximum velocity of a particle on the string is approximately 0.98 m/s.

To know more about velocity, refer here:

https://brainly.com/question/1482529#

#SPJ11

The charge on capacitor C1 is 1000 μC, the charge on capacitor C2 is 1500 μC, and the charge on capacitor C3 is 3000 μC. When capacitors are connected in parallel, the voltage across each capacitor is the same.

So, the voltage across capacitor C1 is 500 V,

the voltage across capacitor C2 is 500 V,

the voltage across capacitor C3 is 500 V.

Calculating the charge on each capacitor

The charge on a capacitor is equal to the capacitance of the capacitor multiplied by the voltage across the capacitor. So,

the charge on capacitor C1 = 2.0 μF * 500 V = 1000 μC,

the charge on capacitor C2 = 3.0 μF * 500 V = 1500 μC,

the charge on capacitor C3 = 6.0 μF * 500 V = 3000 μC.

To know more about capacitors:

https://brainly.com/question/31627158?referrer=searchResult

#SPJ12

Magnetic field is necessary for 1.0 [tex]m^{3}[/tex] of that field to contain 1.0 J of energy.

The energy density u of a magnetic field is given by

u = [tex]B^{2}[/tex]/(2μ)

Where B is the magnitude of the magnetic field and μ is the permeability of free space, which is a constant equal to 4π x [tex]10^{-7}[/tex] Tm/A.

If we want 1.0 [tex]m^{3}[/tex] of the magnetic field to contain 1.0 J of energy, we can rearrange the above equation to solve for B

Substituting the given values, we get

B =[tex]\sqrt{(2*4\pi *10^{-7}Tm/A*1 J/1m^{3 }[/tex]

B = 0.00224 T

Therefore, a magnetic field of 0.00224 T is necessary for 1.0 [tex]m^{3}[/tex] of that field to contain 1.0 J of energy.

To know more about Magnetic field here

https://brainly.com/question/17223673

#SPJ4

One example of gender shift in public roles is in the field of politics. In many countries, women and non-binary individuals are still a minority in political positions, and their presence can challenge traditional gender roles and expectations. When women or non-binary individuals hold political positions, they may face discrimination or prejudice from other politicians or the public, based on their gender identity. However, as more women and non-binary individuals enter politics, they are slowly shifting the gender dynamics and expectations of what it means to be a politician.

Another example of gender shift in public roles is in the entertainment industry. Historically, the industry has been dominated by men and traditional gender roles have been reinforced in many forms of media. However, in recent years, more women and non-binary individuals have gained visibility and recognition in the industry, challenging traditional gender roles and norms. While there is still a long way to go in terms of achieving equal representation and opportunities, these shifts have brought attention to the need for diversity and inclusion in the entertainment industry.

The likely origin of the asteroid belt between Mars and Jupiter can be best described as a result of the solar system's formation process, where the material in this region could not coalesce into a single planet due to the gravitational influence of Jupiter.

During the formation of the solar system, approximately 4.6 billion years ago, a massive cloud of gas and dust began to collapse under its own gravity.

This led to the formation of the Sun, and the remaining material formed a protoplanetary disk around it. Over time, solid particles within the disk started to collide and stick together, eventually forming planetesimals.

In the region between Mars and Jupiter, the process of planet formation was disrupted by the strong gravitational forces exerted by Jupiter, which is the largest planet in our solar system.

These forces prevented the planetesimals from effectively coalescing into a single, larger planetary body. Instead, the planetesimals remained as individual objects, creating what we now know as the asteroid belt.

The asteroid belt contains millions of rocky and metallic objects, ranging in size from small dust particles to larger bodies several hundred kilometers in diameter.

The composition of these asteroids provides valuable insights into the early solar system, as they represent leftover material from its formation.

In summary, the likely origin of the asteroid belt between Mars and Jupiter is a result of the solar system's formation process, where the strong gravitational influence of Jupiter prevented the material in that region from forming a single planet.

To know more about asteroid belt refer here

https://brainly.com/question/25531422#

#SPJ11

Fluorescence is a phenomenon where a substance absorbs light at one wavelength and then emits light at a longer wavelength. Some substances, such as certain dyes and proteins, have the ability to fluoresce when excited by light. This fluorescence emission is often in a different color than the original excitation light.

In microscopy, fluorescent dyes or proteins are often used to label or tag specific structures or molecules within a sample. When excited by a specific wavelength of light, they emit a fluorescence signal that can be detected and imaged.

In this case, if the sample on the microscopy slide has been labeled with a fluorescent dye or protein that emits blue light when excited, then the slide would appear to be shining with a blue light when viewed through the microscope.

To know more about Fluorescence refer here

https://brainly.com/question/24228588#

#SPJ11

The law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium will have an average energy of kT/2, where k is the Boltzmann constant and T is the temperature in Kelvin.

This means that in a system at thermal equilibrium, energy is distributed equally among all available modes of motion.

For example, in a gas, the three degrees of freedom associated with translational motion (movement in three dimensions) contribute kT/2 each to the total energy of the gas, while each degree of freedom associated with rotational motion contributes kT/2 as well.

This law is essential to understanding the behavior of thermodynamic systems, particularly in relation to temperature and heat. It explains why adding heat to a system will increase its temperature, and why the temperature of a system is related to the average kinetic energy of its particles.

In summary, the law of equipartition of energy states that each degree of freedom of a molecule in a system at equilibrium has an average energy of kT/2, where k is the Boltzmann constant and T is the temperature. It is crucial to understanding the behavior of thermodynamic systems and the relationship between temperature and energy distribution.

To know more about equipartition refer here:

https://brainly.com/question/31780484#

#SPJ11

The power delivered to the device when connected to a 6.0 V battery is 10 W, which is less than the power delivered when connected to a 9.0 V battery.

The power delivered to the electronic device is proportional to the voltage supplied to it.

The relationship between power, voltage, and current is given by the equation P = VI, where P is power, V is voltage, and I is current. In this case, the power is given as 15 W when the device is connected to a 9.0 V battery.

Using the equation P = VI, we can solve for the current as I = P/V = 15 W / 9.0 V = 1.67 A. When the device is connected to a 6.0 V battery, the power delivered to the device can be calculated as P = VI = 1.67 A x 6.0 V = 10 W.

Therefore, the power delivered to the device when connected to a 6.0 V battery is 10 W, which is less than the power delivered when connected to a 9.0 V battery.

To know more about voltage, refer here:

https://brainly.com/question/13521443#

#SPJ11

The speed of the block after it has moved 2.9 m is approximately 5.14 m/s.

We can use the work-energy principle to find the speed of the block after it has moved 2.9 m. The work-energy principle states that the net work done on an object is equal to its change in kinetic energy.

Since there is no friction acting on the block, the net work done on it is equal to the work done by the applied force:

Net work = Work done by applied force = Fd

where F is the applied force and d is the distance moved by the block.

The change in kinetic energy of the block is given by:

Δ[tex]K = 1/2 mv^2 - 1/2 m(0)^2 = 1/2 mv^2[/tex]

where m is the mass of the block and v is its final velocity.

Since the net work done on the block is equal to its change in kinetic energy, we can set these two expressions equal to each other:

[tex]Fd = 1/2 mv^2[/tex]

Solving for v, we get:

[tex]v = \sqrt{(2Fd/m)[/tex]

Substituting the given values, we get:

[tex]v = \sqrt{(2 *12.3 N * 2.9 m / 2.5 kg)} = 5.14 m/s[/tex]

To know more about work-energy principle refer here

https://brainly.com/question/28043729#

#SPJ11

The helicopter was flying at an approximate height of 1070.13 meters.

To determine the height at which the helicopter was flying, we can use the speed of sound and the time delay between seeing the helicopter and hearing the sound.

The speed of sound in air depends on the temperature of the air. The relationship between the speed of sound (v) and the air temperature (T) can be approximated by the equation:

v = 331.5 m/s + 0.6 m/s/°C * T

Given:

Time delay between seeing the helicopter and hearing the sound = 3.10 s

Air temperature = 23.0°C

First, let's calculate the speed of sound at the given air temperature:

v = 331.5 m/s + 0.6 m/s/°C * T

v = 331.5 m/s + 0.6 m/s/°C * 23.0°C

v ≈ 331.5 m/s + 13.8 m/s

v ≈ 345.3 m/s

Next, we can calculate the distance traveled by the sound in the time delay:

Distance = Speed × Time

Distance = 345.3 m/s × 3.10 s

Distance ≈ 1070.13 m

Since the sound traveled from the helicopter to your location, the distance is equal to the height at which the helicopter was flying.

To know more about height refer here

https://brainly.com/question/29131380#

#SPJ11

The sound intensity level 30.0 m from the source is approximately 92.5 dB.

To find the sound intensity level 30.0 m from the source, we need to follow these steps:

1. Calculate the sound intensity (I) at 30.0 m from the source:

Since the acoustical power (P) is spread equally in all directions, we can use the formula I = P / (4πr²),

where r is the distance from the source (30.0 m). So,

I = (20.0 W) / (4π × (30.0 m)²)

I = 20.0 / (4 × 3.14159 × 900)

I ≈ 1.77 × 10⁻³ W/m²

2. Calculate the sound intensity level (β) using the formula β = 10 × log10(I/I₀), where I₀ is the threshold of hearing (1.0 × 10⁻¹² W/m²). So,

β = 10 × log10((1.77 × 10⁻³ W/m²) / (1.0 × 10⁻¹² W/m²))

β ≈ 10 × log10(1.77 × 10⁹)

β ≈ 10 × (9.2477)
β ≈ 92.5 dB

The sound intensity level 30.0 m from the source is approximately 92.5 dB.

To know more about intensity level 30.0  refer here

brainly.com/question/11993021#

#SPJ11

The final common velocity of the two trucks after the collision is 14.53 m/s.

To calculate the final common velocity of the two trucks after the collision, we will use the law of conservation of momentum. The given terms are: the mass of the first truck (8 tons), its velocity (60 km/h), the mass of the second truck (5 tons), and its velocity (40 km/h).

First, we need to convert the velocities from km/h to m/s:

60 km/h = (60 * 1000 m) / (3600 s) = 16.67 m/s
40 km/h = (40 * 1000 m) / (3600 s) = 11.11 m/s

Next, we calculate the initial momentum of both trucks:

Initial momentum = (mass of first truck * its velocity) + (mass of second truck * its velocity)
Initial momentum = (8 * 16.67) + (5 * 11.11) = 133.36 + 55.55 = 188.91 kg m/s

Since both trucks move together after the collision, we can find their combined mass (13 tons) and use it to calculate the final common velocity:

Final common velocity = Initial momentum / Combined mass
Final common velocity = 188.91 kg m/s / 13 tons = 14.53 m/s

So, the final common velocity of the two trucks after the collision is 14.53 m/s.

To know more about collision, refer here:

https://brainly.com/question/24616147#

#SPJ11

The time it took for the ultrasound to travel from the boat to the fish is 0.4 seconds.

The total time for the ultrasound pulse to travel from the boat to the fish and back is twice the time it took for the reflection to be detected, since the ultrasound travels at the same speed in both directions.

Therefore, we can find the time it took for the ultrasound pulse to travel from the boat to the fish by dividing the total time by 2:

Time from boat to fish = (Total time for round trip) / 2

Since the reflection was detected 0.4 seconds after the ultrasound pulse was sent out, the total time for the round trip is:

Total time for round trip = Time for ultrasound to travel from boat to fish + Time for reflection to travel from fish to boat

Since the reflection travels at the same speed as the ultrasound, the time for the reflection to travel from the fish to the boat is also 0.4 seconds.

Therefore, we can write:

Total time for round trip = Time for ultrasound to travel from boat to fish + 0.4 s

Substituting this into the first equation, we get:

Time from boat to fish = (Total time for round trip) / 2 = [Time for ultrasound to travel from boat to fish + 0.4 s] / 2

Since we want to find the time it took for the ultrasound to travel from the boat to the fish, we can rearrange this equation to isolate that quantity:

Time for ultrasound to travel from boat to fish = 2 × Time from boat to fish - 0.4 s

Substituting the given value of 0.4 seconds for the round-trip time, we get:

To know more about ultrasound pulse refer here

https://brainly.com/question/13412561#

#SPJ11

Paul Revere will travel a distance of 80 miles before the bicycles meet, and the rubber ball will bounce a distance of 20 feet.

First, we need to find the time it takes for the bicycles to meet. Using the formula d = rt, we can find that:

time = distance / rate

time = 100 miles / (10 mph + 15 mph)

time = 4 hours

During this time, Paul Revere will fly back and forth between the bicycles at a speed of 20 mph, so the total distance he travels will be:

distance = speed x time

distance = 20 mph x 4 hours

distance = 80 miles

Therefore, Paul Revere will travel a distance of 80 miles before the bicycles meet.

Next, we can find how far the rubber ball will bounce. Since the ball always bounces half the height that it drops, we can use the formula:

distance = initial height / 2

distance = 40 feet / 2

distance = 20 feet

Therefore, the ball will bounce a distance of 20 feet.

To know more about bicycle, here

brainly.com/question/13795395

#SPJ4

--The complete question is, Two riders on bicycles, 100 miles apart, begin traveling towards each other at the same time, one traveling at 10 miles per hour and the other at 15 miles per hour. A fly named Paul Revere begins flying between the bicycles, starting from the front wheel of the slower bicycle. If the fly travels at 20 miles per hour flying back and forth between the bicycles, how far will Paul Revere travel before the bicycles meet? Also, Adam dropped a rubber ball from a window 40 feet above the sidewalk. How far will the ball bounce if it always bounces half of the height that it drops?--

Assuming the light ray enters the glass from air at an angle, it will bend towards the normal (an imaginary line perpendicular to the surface of the glass) as it enters the glass due to the decrease in speed.

Once inside the glass, the light ray will continue to travel in a straight line until it reaches the other side of the glass. As it exits the glass and enters air again, it will bend away from the normal due to the increase in speed.

Overall, the path of the light ray will be bent twice, once when it enters the glass and again when it exits the glass, due to the change in the speed of light in the two different media.

Learn more about light ray Visit: brainly.com/question/30614297

#SPJ4

The required wavelength to cause sunburn on human skin by breaking a chemical bond is 3.56 x 10⁻⁷ meters

Use the equation E=hc/λ, where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength.

First, convert the energy of the photon to joules (J) from electron volts (eV):

3.5 eV x 1.602 x 10⁻¹⁹ J/eV = 5.61 x 10⁻¹⁹ J

Next, substitute the values into the equation:

5.61 x 10¹⁹ J = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/λ

Solving for λ:

λ = (6.626 x 10⁻³⁴ J s)(3.0 x 10⁸ m/s)/(5.61 x 10⁻¹⁹ J) = 3.56 x 10⁻⁷ m

Therefore, the required wavelength is approximately 3.56 x 10⁻⁷ meters (or 356 nanometers), which falls in the ultraviolet (UV) region of the electromagnetic spectrum.

Find out more on sunburn here: https://brainly.com/question/26609703

#SPJ1

The energy changes that occur when the small aeroplane with a mass of 600kg is working and powered by fuel cells that use hydrogen gas are:

chemical --> electrical --> kinetic

This means that the fuel cells convert the chemical energy of the hydrogen gas into electrical energy, which is then used to power the electric motor of the aeroplane, resulting in the generation of kinetic energy that propels the aeroplane forward.

Therefore, the energy transformations that occur in this scenario are from chemical energy to electrical energy, and then from electrical energy to kinetic energy.

To learn more about kinetic, refer below:

https://brainly.com/question/26472013

#SPJ11

Answer: C.

The gravity on the Moon is less than the gravity on Earth.

Explanation: plato :3