Hydroxyapatite, Ca5(PO4)3(OH), is the main mineral component of dental enamel, dentin, and bone, and thus it has many medical uses. Coating it on metallic implants (such as titanium alloys and stainless steels) helps the body accept the implant. In the form of powder and beads, it is used to fill bone voids, which encourages natural bone to grow into the void. Hydroxyapatite is prepared by adding aqueous phosphoric acid to a dilute slurry of calcium hydroxide.
(a) Write a balanced equation for this preparation. Be sure to include the state of each reactant and product in the equation. Hint: Liquid water is one of the products of this reaction.
(b) What mass of hydroxyapatite could form from 128 g of 95.0% phosphoric acid and 113 g of calcium hydroxide?
g Ca5(PO4)3(OH)

Answer:

D. If I brush my teeth, I will get fewer cavities than if I don't brush my

teeth.

Explanation:

The accurate responses are;

1) it has the configuration of of the noble gas in the same period

2) higher, gain, more

The electron configuration shows the arrangement of the atoms in an element. We know that in an element, the nucleus is at the core of the atom. The shells have energies increasing order with the shells that are close to the nucleus having the lowest energy and the energy of the shells tends to increase radially outwards from the nucleus.

Now let us try to look at sodium. We know that the formation of ions leads an element to attain the noble gas configuration. We can see that when sodium loses an electron, it closely resembles the noble gas neon.

The ionization energy is the energy that is required for the removal of one electron from the outermost shell of the atom. The complete statement therefore is; Ionization energies for nonmetals are higher than metals because they would rather gain  electrons than lose electrons, so it takes more energy.

Learn more about electron configuration:https://brainly.com/question/13497372

#SPJ1

The heat capacity of liquid is  1.53 J/ g°C

Heat capacity measures the energy required to raise temperature of a unit mass of a substance by a unit degree

Formula used:

          Q = m × c ×  ΔT

               = m × c × ( T₂ - T₁ )

where,

Q = Amount of heat gained or lost  = 53 J

m = mass of liquid = 15 g

c = specific heat of liquid = ?

ΔT = change in temperature

T₁ = initial temperature = 10.7 °C

T₂ = final temperature = 13 °C

Substituting the values in the formula

        53 J = 15 g × c × ( 13 - 10.7) °C

         53 J = 15 g × c × 2.3 °C

             c = 53/ ( 15 × 2.3 )

                = 1.53 J/ g°C

Thus we can conclude that the heat capacity of liquid is  1.53 J/ g°C

Learn more about specific heat capacity at https://brainly.com/question/27991746

#SPJ9

Answer:15

Explanation:

The number of cups of coffee in  a 2010-gal cup of coffee  is 16086 cups of coffee

The  number of cups of coffee in  a 2010-gal cup of coffee is calculated as follows:

Number of cups of coffee = volume of 2010-gal in ml/473 ml

Volume of large cup of coffee = 2010-gal

Number of mL in 1 gal = 3785.41 mL

2010 gal in mL = 2010 * 3785.41

2010 gal in mL = 7608674.1 mL

Number of cups of coffee = 7608674.1 mL/473 mL

Number of cups of coffee = 16086 cups of coffee

In conclusion, the number of cups pf coffee in 2010 gal is obtained using the conversion factor between gal and mL

Learn more about volume in gal to mL at: https://brainly.com/question/13769735

#SPJ1

Answer: Cr (chromium) has multiple oxidation states, while Ca (calcium) only has one.

Explanation: You only specify with a Roman numeral when the metal/positively charged ion in the compound has multiple charges. Chromium is a transition metal, and most transition metals have multiple charges. Calcium is a group 2 metal so it will only have a charge of +2.

1. "Fn" stands for "Normal Force," "Fg" for "Gravity Force," "Ff" for "Force Friction," and "A" for "Applied Force." 2. As a result of the friction, which causes the ball to stop. 3. The reason the ball rolls is due to the force that is imparted to it.

The definition of force is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. A force that opposes this motion of the hands is activated when they brush against one another. Frictional force is the force resisting motion applied in the direction perpendicular to the direction of motion of the hands.

Learn more about Force here-

https://brainly.com/question/13191643

#SPJ9

Considering the definition of percentage by mass, you need a volume of solution of 20.9965 mL to supply 43 g of sulfuric acid.

The Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

percentage by mass= (mass of solute÷ mass of solution)× 100

Density is a quantity that allows to measure the amount of mass in a certain volume of a substance.

The expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:

density= mass÷ volume

In this case, you know:

First, you calculate the mass of sulfuric acid considering the definition of percentage by mass:

88= (mass of solute÷ 43 g)× 100

Solving:

88÷ 100= mass of solute÷ 43 g

0.88=mass of solute÷ 43 g

0.88×43 g= mass of solute

37.84 g= mass of solute

Now, the volume is calculated taking into account the definition of density:

1.8022 g/cc= 37.84 g÷ volume

Solving

1.8022 g/cc× volume= 37.84 g

volume= 37.84 g÷ 1.8022 g/cc

volume= 20.9965 cc= 20.9965 mL (being 1 cc= 1 mL)

Finally, you need a volume of solution of 20.9965 mL to supply 43 g of sulfuric acid.

Learn more about

percentage by mass:

brainly.com/question/19168984

brainly.com/question/18646836

density:

brainly.com/question/952755

brainly.com/question/1462554

#SPJ1

Binary compound is a substance that is made up of precisely two separate components and cannot be further simplified chemically. Binary compounds include, for instance, H₂O, H₂S, and NH₃.

1. NH₄Cl - It is not a binary compound because it contains more than two elements that is Nitrogen, hydrogen and chlorine.

2. CaS - It is a binary compound because it contains two elements Calcium and sulfur.

3. P₂O₅ - It is a binary compound because it contains two elements Phosphorus and Oxygen.

3. CaSO₄ - It is not a binary compound because it contains more than two elements that is calcium, sulfur and oxygen.

4.  N₂O - It is a binary compound because it contains two elements that is Nitrogen and Oxygen.

5. Cl₂- It is not a binary compound because it does not contain two different elements rather it is a diatomic molecule.

Diatomic molecules- Two atoms are chemically linked together to form diatomic molecules. A homonuclear diatomic molecule is created when two identical atoms combine, such as in the oxygen molecule (O₂). A heteronuclear diatomic molecule is created when two unidentical atoms combine, such as in the CO₂ .

To learn more about compounds refer- https://brainly.com/question/26487468

#SPJ9

Answer:

27.3 g HCl

Explanation:

**Be sure to arrange the conversion in a way that allows for the cancellation of units.

(Step 1)

Convert milliliters (mL) to liters (L).

1,000 mL = 1 L

 250 mL                1 L
---------------  x  -----------------  =  0.25 L
                         1,000 mL

(Step 2)

Use the molarity ratio to find the moles of HCl.

Molarity = moles / L

3 M = moles / 0.25 L

0.75 = moles

(Step 3)

Convert moles to grams using the molar mass of HCl.

Molar Mass (HCl): 1.008 g/mol + 35.453 g/mol

Molar Mass (HCl): 36.461 g/mol

0.75 moles HCl             36.461 g
--------------------------  x  --------------------  =  27.3 g HCl
                                         1 mole

Taking into account the reaction stoichiometry, the correct answer is option E. when 25.0 g of Zn reacts, 52 grams of ZnCl₂ are produced.

In first place, the balanced reaction is:

Zn + 2 HCl → H₂ + ZnCl₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 63.37 grams of Zn form 136.27 grams of ZnCl₂, 25 grams of Zn form how much mass of ZnCl₂?

mass of ZnCl₂= (25 grams of Zn× 136.27 grams of ZnCl₂)÷ 63.37 grams of Zn

mass of ZnCl₂= 53.76 grams

This mass can be considered approximately equal to 52 grams. Finally, the correct answer is option E. when 25.0 g of Zn reacts, 52 grams of ZnCl₂ are produced.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Explanation:

A pure substance is a form of matter that has a constant composition and properties that are constant throughout the sample. Mixtures are physical combinations of two or more elements and/or compounds

The diagrams of a chemical compound give an idea of the structure and composition of the compound.

Because a molecular formula often does not accurately describe a single molecule, structural formulae must be created for organic compounds. Isomers are different compounds with the same chemical formula, and the abundance of organic isomers is a reflection of carbon's exceptional plasticity in creating stable bonds with both other elements and itself.

We refer to such compounds as constitutional isomers when the atoms that make up the molecules of various isomers are linked together in fundamentally different ways. The formulae share a similar structural element and represent all known and hypothetical C4H10O compounds. No double or triple bonds and no rings exist in any of these structures.

Therefore, the diagrams of a chemical compound give an idea of the compound.

Read more about chemical compounds, here

https://brainly.com/question/11064416

#SPJ1

Fluorine has a smaller ionic radius than oxygen, because the attraction between protons and valence electrons is stronger; option B

Ionic radius is the radius of an ion of an element.

The ionic radius of ions of elements depends on the nuclear charge as well as the number of electrons in the outermost shell of of an ion of an element.

The nuclear charge is the charge on the nucleus as a result of the positively-charged proton present in the nucleus. The proton exerts an attractive force on the electrons, thus reducing the size of the ion if nuclear charge increases.

The ionic radius of metallic ions decrease from left to right across the period table as a result of the increase in the nuclear charge of the ions.

However, the ionic radius of metals increase on going down a group in the periodic table.

Similarly, the ionic radius of non-metallic ions decrease from left to right across the period table as a result of the increase in the nuclear charge of the ions.

The ionic radius of non-metals also increase on going down a group i the periodic table.

Therefore, the ionic radius of oxygen will be greater than that of fluorine because of a smaller nuclear charge.

Learn more about ionic radius at: https://brainly.com/question/6965246

#SPJ1

Answer:

0.0970 moles NaCl

Explanation:

To find the amount of moles, you need to multiply the mass (grams) by the molar mass of NaCl. The molar mass exists as a ratio that compares the mass of a substance per every 1 mole. The molar mass is made up of the individual atomic masses of every element in the molecule. The final answer should have 3 sig figs like the given value (5.67 = 3 sig figs).

Atomic Mass (Na): 22.770 g/mol

Atomic Mass (Cl): 35.453 g/mol

Molar Mass (NaCl): 22.990 g/mol + 35.453 g/mol

Molar Mass (NaCl): 58.443 g/mol

 5.67 grams NaCl                 1 mole
----------------------------  x  -------------------------  =  0.0970 moles NaCl
                                        58.443 grams

The reaction of -COOH and -NH₂ creates a peptide bond.

Peptide bond is defined as a type of amide type covalent chemical bond which is formed between the two simultaneous molecules of amino acid in such a way that carboxyl group of one molecule of amino acid get attached to the NH₂ group of another molecules of Amino acid.

Peptide bond is formed by the elimination of water molecules.

The hydroxyl group from the carboxyl and proton hydrogen cation from NH₂ group.

Thus, we concluded that the reaction of -COOH and -NH₂ creates a peptide bond by losing—OH from the -COOH and H+ from the -NH₂.

learn more about Peptide bond:

https://brainly.com/question/11559138

#SPJ9

The calculated answer is 96.7

In the chemical process of combustion, an object quickly combines with oxygen to produce heat. The original substance is referred to as the fuel, and the oxygen's source as the oxidizer. Although it is typically a liquid for airplane propulsion, the fuel can be a solid, liquid, or gas.

In an air-burning flame of pure hydrogen, hydrogen (H2) combines with oxygen (O2) to generate water (H2O), releasing energy in the process. Instead of producing pure oxygen, hydrogen combustion in ambient air can occasionally produce a tiny amount of nitrogen oxides along with the water vapor. Hydrogen can be utilized as a fuel thanks to the energy emitted.

Methanol burns in the following way: CH3OH(l)+ 23O2(g)21CO2(g)+2H2O (l)

G= [G f CO2 (g)+2 G f H2O(l)] reaction

[Gf CH3OH(l)+23Gf O2 (g)]

[−394.36+2(−237.13)]

− [−166.27+0]

=−702.35kJmol−1

How well Gibbs free energy is converted into meaningful labor

= "H reaction," "G reaction," and "100."

= −702.35×100/−726

=96.7

Learn more about combustion here-

https://brainly.com/question/15117038

#SPJ9

The effect of table salt and sugar on bubbles is that sugar makes it easier to blow and stronger whereas salt makes it difficult to blow bubbles.

(i) The combination in cup 2 made blowing bubbles simpler since the bubbles lasted longer; nevertheless, when the bubbles struck something, they popped just as easily as the ones in cup 1.

(ii) However, compared to cup 1, the combination in cup 3 made blowing bubbles more challenging.

(iii) Compared to salt, which did not mix well together with liquid dish detergent and made it more difficult to blow huge, forceful bubbles, sugar was an excellent ingredient to mix with liquid dish detergent.

(iv) If we were to carry out this experiment further, we may experiment with other materials in the cups to discover which ones the liquid dish detergent reacted best with. Using cups 4 and 5 for flour and brown sugar and cup 6 for pepper, respectively. Then, we would contrast these combinations with the cups that we had already examined.

Learn more about effect of table salt and sugar on bubbles here:

https://brainly.com/question/13136734

#SPJ9

The first product is a secondary alcohol as shown and the last product is an alkanone.

The term reaction mechanism has to do with the series of steps by which a chemical reaction occurs. We know that a chemical reaction may not occur in just a single reactive encounter. We could have cases just as have been showed above where the single chemical reaction has to take place through a route that involves several steps along the reaction pathway. This long pathway of the reaction is what we have called the reaction mechanism of the given or particular reaction.

In this case, the first step in the reaction is the addition of water to the alkene and this would led to the formation of an alkanol as you can see from the image attached to the answer here . This is the product that has been labelled (a).

In the second step of the process. The strong oxidizing agents and the secondary alcohol yields the alkenone and that is the final product as shown.

Learn more about reaction mechanism:https://brainly.com/question/26690612

#SPJ1

The mass of carbon in a sample of the compound is 1.46 g

The percent mass of Carbon in the sample of he compound is calculated as follows:

Mass of sample of compound = 8.07 g

Mass of H = 0.299 g

Mass of N = 4.18 g

mass of carbon = 8.07 g - 0.299 g - 4.18 g

Mass of carbon = 3.591 g

Percent mass of carbon = 3.591/8.07 * 100%

Percent mass of carbon = 44.5 %

Therefore, mass of carbon in a sample of the compound with a mass of 3.28 g  = 3.28 g * 44.5%

mass of carbon in a sample of the compound = 1.46 g

Learn more about percent mass at: https://brainly.com/question/17812901

#SPJ1

Answer:

see the step by step answer is up

Answer:

Radium

Explanation:

The tuna fish that swam at a constant velocity of 1.2 meters per second toward a smaller fish in 7 seconds swam 8.4m.

The distance moved by a moving body can be calculated by multiplying the speed by the time taken as follows:

Distance = speed × time

According to this question, a tuna swam at a constant velocity of 1.2 meters per second toward a smaller fish. If the tuna swam toward the smaller fish for 7.0 seconds, the distance is calculated as follows:

Distance = 1.2m/s × 7s

Distance = 8.4m

Therefore, the tuna fish that swam at a constant velocity of 1.2 meters per second toward a smaller fish in 7 seconds swam 8.4m.

Learn more about distance at: https://brainly.com/question/12759408

#SPJ1

Answer:

i think u have to mutiply but i might be confused

i think the answer is 8.4 im not sure tho

Explanation:

Answer: 7 pills

Explanation:

A day is 24 hours so you multiply 12 x 2 and do the same to 525, 525 x 2 = 1050

then divide 1050 by 150 and you get 7

The answer will be 3,279 km/hr.

Pedometer is a device used to measure the number of steps covered by a person.

Pedometer sensor = Step count and IMS sensor used.

Peak Speed rate recorded in the pedometer = 91.1 cm/s

1 Km = 100 * 1000 cm

1 hour = 60 * 60 = 3600 sec

Now, 1 cm = 10^-5 km

1 sec = 0.00027777777 hour

speed = 91.1 cm /s = 91.1 * 10^-5 / 0.00027777777 km/hour

speed = 3.279 km/hr

Steve's peak speed rate in km / hr would be 3.279 km/hr

To know more about Pedometer here :

https://brainly.com/question/12439423?referrer=searchResults

#SPJ1

The statement that is true regarding percentage error is as follows: the percentage error is a percentage that details how far an approximation is from the exact value after an experiment (option B).

Percentage error is the difference between estimated value and the actual value in comparison to the actual value and is expressed as a percentage.

The percentage error in an experiment can be calculated by subtracting the actual value from the estimated value divided by the actual value, then multiplying the result by 100.

Percentage error = (Estimated value - Actual value/ Actual value) × 10

Therefore, the statement that is true regarding percentage error is as follows: the percentage error is a percentage that details how far an approximation is from the exact value after an experiment.

Learn more about percentage error at: https://brainly.com/question/4170313

#SPJ1

In a collision between two objects both objects experience forces of equal magnitude and in opposite directions. Such forces often cause one object to accelerate and gain momentum, and another to decelerate and lose momentum.

The kinetic energy of the whole system before the collision equals the kinetic energy of the whole system after the collision. If all the kinetic energy is not conserved, the collision is called an inelastic collision. For collisions between two objects, momentum is conserved. The initial momentum is non-zero, so the final momentum is non-zero. Both objects cannot be at rest. It is possible that one of the objects remained after the collision.

When two cars collide your car pushes the other car. According to Newton's 3rd law, this car is pushing your car in the opposite direction with the same force. This power slows you down. In a collision, objects always encounter momentum and momentum changes. In a collision, the momentum received by an object equals the change in velocity. The velocity change of the two objects involved in the collision is always the same.

Learn more about kinetic energy here:-https://brainly.com/question/114210

#SPJ1

The concertation of the undissociated acid is 3×10^−1M.

Now let us know that the acid dissociation constant shows the extent to which the acid would be dissociated in a given time. To obtain the concentration of the unionized acid, we need to first obtain the the concentration of the hydrogen ion.

Using;

pH = 2

[H^+] = Antilog (-2) = 0.01 M

Ka = [H^+] [OCN−]/HOCN

Given that  [H^+] = [OCN−] = 0.01 M

Ka = [H^+]^2/HOCN

HOCN =  [H^+]^2/3×10^−4

HOCN =   (0.01)^2/3×10^−4

HOCN =  3×10^−1M

Learn more about acid dissociation:https://brainly.com/question/15012972

#SPJ1

Answer:

ans is b 62 g/mole

because mass of h is 2 an carbon is 12 and 3 atoms of oxygen in 16*3 =48 adding all we get 62 g/mole

Answer:She became one of the six space tourists transported by Blue Origin's New Shepard spacecraft, proving that there is room in the universe for all those who strive to reach it. The ten-minute trip marked the fifth successful manned mission for Jeff Bezos' company, but the feat of a lifetime for Echazarreta.

Explanation: