Substance that gives out ions when dissolved in water, which are able to conduct electricity describes an electrolyte.
What physical property of matter can be measured using the triple beam balance?
A
volume
B
mass
C
height
D
length
SUBMIT ANSWER
Answer:
B) Mass- I searched it up
Convert 675000 to scientific notation
Answer:
To convert 675000 to scientific notation, we need to express it in the form a × 10^n, where a is a number between 1 and 10 (but not 10 itself), and n is an integer.
Starting with 675000, we can divide by 10 repeatedly until we get a number between 1 and 10.
675000 ÷ 10 = 67500 (one division by 10)
67500 ÷ 10 = 6750 (two divisions by 10)
6750 ÷ 10 = 675 (three divisions by 10)
Now we have a number between 1 and 10 (namely, 6.75), and we know that we divided by 10 three times, so the exponent is -3.
Therefore, we can express 675000 in scientific notation as:
6.75 × 10^5
(Note that we could also express it as 6.75 × 10^2 × 10^3, but this is not in standard scientific notation, which requires the coefficient to be between 1 and 10.)
0.0002844 moles of water to individual water molecules.
One litre (L) of water (H2O) weighs 1,000 g and has a molar mass of 18 grammes (g). The term "mole" is frequently used to refer to a molecular weight. Hence, 55.6 moles more water are present in 1 litre of water.
How are moles transformed into molecules and mass?How do you translate mass into moles using a formula. By dividing the number the molecules by Avogadro's number, one can determine the number of moles inside a given number of substance molecules. When dividing the mass even by formula mass given in g/mol, one can determine the number de moles in a given quantity of substance.
How are H2O molecules calculated?Using the periodic tables, we can calculate the atomic mass of a elements. We find that hydrogen has an atomic weight of 1, whereas that for oxygen is 16. To calculate the molecular weight of a single water molecule, we add the contributions from each atom, which equals 2(1) + 1(16) Or 18 gram/mole.
To know more about mass visit:
https://brainly.com/question/28180102
#SPJ1
Which of the following could be a useful IPM monitoring strategy to reduce crop damage from pests?
A.mating disruption devices B.noisemakers C.pesticides D.forecasting software
Answer:
C. pesticides
Explanation:
hope it helps :)
42 grams of nitrogen gas react with
13 grams of hydrogen gas. What is the
limiting reactant and how many grams of
ammonia will be produced?
N2 + 3H22NH3
A) H2; 74 grams NH3 produced
B) H2; 4.3 grams NH3 produced
C) N2; 3.0 grams NH3 produced
D) N2; 51 grams NH3 produced
Answer:
d
Explanation:
Nitrogen is the limiting reactant.
42 g N2x (1mole N2/28 g N2) X (2 moles NH3/ 1mole N2) X (17 grams NH3/1mole NH3) = 51 g
13 g H2 x (1 mole H2/2 g H2) X (2 moles NH3/3moles H2) X (17 g NH3/1mole NH3) =73.66g
since 51 is smaller than 73.66 and it started with N2 that is why N2 is the limiting reactant)
What's the difference between magnesium and Aluminum?
Answer:
The key difference between aluminum and magnesium is that the aluminum is a corrosion resistant metal whereas magnesium is not. Magnesium and aluminum are two chemical elements that we can categorize as metals in the periodic table. Both are naturally occurring metals in different mineral forms.
Explanation:
Mass of 8.46x10^24 atoms of fluorine is 266.95g.calculate the atomic mass of fluorine
Answer:
The atomic mass of fluorine is 18.9984 g/mol.
Explanation:
1. Calculate the number of moles of fluorine:Mass of 8.46x10^24 atoms of fluorine = 266.95gOne mole of fluorine contains 6.022x10^23 atoms. Therefore, the number of moles of fluorine = 8.46x10^24 / 6.022x10^23 = 14.05 moles
2. Calculate the atomic mass of fluorine:Atomic mass of fluorine = mass of one mole of fluorine= 266.95g/14.05 mol= 18.9984 g/mol Therefore, the atomic mass of fluorine is 18.9984 g/mol.
reaction is third order for reactant A and zero order for reactant B. If you quadruple the concentration
of A, what happens to the reaction rate? If you quadruple the concentration of B, what happens to
the reaction rate?
Regardless of the reactant B concentration, the reactant rate remains constant. As a result, the response rate is unaffected by increasing B's concentration by a factor of four.
In chemical, what is concentration?The amount of a substance's solute in a specific amount of solution is how concentrated it is. Molarity, or the amount of molecules of solute in one liter of solution, is a common unit of measurement for concentrations.
What exactly are meditation and focus?Focusing for an extended amount of time on one thing without interruption is meditation. Concentrating the mind on a specific object is the basic exercise of concentration that all meditations begin with. After some practice, concentration can eventually turn into meditation when the mind is calm and not easily diverted by other thoughts.
To know more about Concentration visit:
https://brainly.com/question/10725862
#SPJ1
Which of these is not a sign of a chemical reaction?
1. The material dissolves
2. Heat is released
3. A gas is given off
A chemical reaction is known by;
2. Heat is released
3. A gas is given off
How do you know a chemical reaction?A change in color may indicate that a chemical reaction has occurred. For example, when iron is exposed to air and moisture, it rusts and turns from silver to reddish-brown.
If a gas is produced during a reaction, it can indicate that a chemical reaction has occurred. For example, when baking soda is mixed with vinegar, carbon dioxide gas is produced, which causes bubbles to form.
Learn more about chemical reaction:https://brainly.com/question/29039149
#SPJ1
Which statement best describes the law of conservation of mass?(1 point)
A) Reactants in a chemical reaction rearrange to form a new substance or substances.
Not college level lol
B) Reactants and products cannot escape from a closed system.
C) Matter cannot be created or destroyed in a chemical reaction.
D) Chemical symbols are used to show atom balance before and after a reaction.
Lesson name) Balanced Chemical Equations Quick Check.
The acid should be handled with great care why?
Acids have a strong tendency to corrode. Acid splashing on our flesh can result in severe burns and skin irritation. Therefore, when managing acids, we should exercise caution.
Should one manage strong acids with caution?Although acids and bases are frequently used in a wide range of industrial applications, it's essential to keep in mind that they are hazardous waste and should be handled carefully.
How should laboratory chemicals be handled?When working with concentrated acids or acid solutions, put on chemical splash goggles, chemical-resistant mittens, and a chemical-resistant apron. In a fume cover, work with concentrated acids. In accordance with your requirements, purchase diluted acid solutions. It is safer and simpler to manage, store, and use diluted solutions.
To know more about Acids visit:-
https://brainly.com/question/14072179
#SPJ9
A percent composition analysis yields 52.1% carbon, 13.2% hydrogen, and 34.7% oxygen. What is the empirical formula for the compound?
O:C:H ratio is 34.8/16/52.2/12/13/0/1 = 2.17/4.35/13/0 = 1:2/6. Hence, C2H6O is the empirical formula (option D).
What purposes does hydrogen serve?Fuel cells may produce heat and energy from hydrogen. Although transportation and utilities are expanding businesses, fertilizer manufacturing and petroleum refining still use hydrogen most frequently today.
Can hydrogen be burned as fuel?According to the 1992 Energy Policy Act, hydrogen qualifies as an alternative fuel. The ability of hydrogen to power fuel cell technology in zero-emission vehicles, the potential for home consumption, and the high efficiency and quick filling time of fuel cells all contribute to the interest in hydrogen as such an alternative transportation fuel.
To know more about Hydrogen visit:
https://brainly.com/question/28937951
#SPJ1
converting moles to mass in grams using dimensional analysis
1. 0.0728 mol to Silicon
2. 5.5mol of H2O
3) 0.0728 of Ca(H2PO4)2
Answer:
Explanation:
1) 0.0728 x (28.086 g Si/ 1mole Si) =2.04 g Si
2) 5.5 mol H20 x (18g H20/1mole H20) = 99 g H2O
3) 0.0728 moles Ca(H2PO4)2 x ( 234 g/ 1mole) = 17.04 g Ca(H2PO4)2
For the following chemical reaction:
In the laboratory, a chemist mixed aqueous barium chloride with aqueous potassium oxide which produced solid barium oxide and aqueous potassium chloride
A. Write the complete balanced chemical equation, including phase labels.
B. Identify the type of reaction that has occurred.
C. Identify the indicator that tells you a chemical reaction has occurred.
A. The balanced chemical equation with phase labels is: BaCl2 (aq) + K2O (aq) → BaO (s) + 2KCl (aq)
B. This is a double displacement or metathesis reaction, as the cations and anions of the reactants switch places to form new compounds.
C. The indicator that a chemical reaction has occurred is the formation of a solid (BaO) and the disappearance of the reactants (BaCl2 and K2O) as they react to form products (BaO and KCl).
What is balanced chemical equation?A balanced chemical equation is a representation of a chemical reaction using chemical formulas of the reactants and products, and coefficients to indicate the relative numbers of each.
The coefficients are used to balance the equation such that the number of atoms of each element in the reactants is equal to the number of atoms of the same element in the products.
Learn more about balanced chemical equation here: https://brainly.com/question/26694427
#SPJ1
A 25.0 kg iron weight lifting plate has a volume of 3180 cm3 . what is the density of the iron plate in g/cm3?
Answer:
The density of a substance is given by dividing the mass by the volume.
The S.I units of density are kg/m³, but can be measured by other units such as g/cm³
The mass of the iron is 29 kg or 29000 g
Therefore; Density = 29000 g/ 3680 cm³
= 7.880 g/cm³
Hence, the density of the iron plate is 7.880 g/cm³
Explanation:
Which one is the most polar based on their Lewis structure: Hydrochloric acid (HCl) or hydroiodic acid (HI)?
Since there is a larger difference in electronegativity between hydrogen and chlorine than between hydrogen and iodine, hydrochloric acid is more polar than hydroiodic acid.
Is the atom hydrochloric acid, HCl, a polar one?A polar substance is HCl. This occurs because the more electronegative Chlorine (Cl) atom in the HCl molecule does not evenly share the bonding electrons with the hydrogen atom. (H). However, owing to the molecules' two atoms' similar electronegativity, H2 and Cl2 are not polar.
Which type of material is hydrochloric acid—polar or nonpolar?Because chlorine is more electronegative than hydrogen, it draws the bonded electron pair closer to it and acquires a partial negative charge, whereas hydrogen acquires a partial positive charge, making chlorine (hydrochloric acid) a polar molecule.
To know more about electronegativity visit:-
https://brainly.com/question/17762711
#SPJ9
What could be the effects of polluting the water in a small mountain stream?
(A) the pollutants could hurt the fish living in the stream
(B) the pollutants could hurt the vegetation growing along the stream
(C)the pollutants could hurt the organisms living in the lake that the stream feeds into
(D)all of the above
Answer:
Explanation:
The pollutants can cause algae to grow quickly. These 'blooms' of algae may produce toxins that harm other life in the river. When the algae die and decay, this uses up much of the oxygen in the stream. Without enough oxygen in the water, invertebrates and fish will suffocate .
Answer:
D, all of the above.
Explanation:
Pollutants have many bad effects on living beings around. All of stated in the answer options makes sense.
Bromophenol blue is another common acid-base indicator which changes color from yellow in acidic solution to blue in basic solution. The pH values for this indicator are in a range of approximately 3.0 to 4.6. Instead of using phenolphthalein in the CH3COOH-NaOH titration, if bromophenol blue was used, would the calculated molarity of acetic acid be higher, lower, or the same? Explain.
Answer:
It would be higher
Explanation:
If bromophenol blue was used instead of phenolphthalein in the CH3COOH-NaOH titration, the calculated molarity of acetic acid would be higher. This is because the pH range for bromophenol blue is lower than that of phenolphthalein (approximately 3.0 to 4.6 compared to 8.2 to 10.0). Therefore, the endpoint of the titration (where the indicator changes color) would occur at a lower pH for bromophenol blue, indicating that more NaOH has been added to neutralize the acetic acid. This would result in a higher calculated molarity of acetic acid.
How many milliliters of 9.89 M nitric acid solution should be used to prepare 3.50 L of 0.200 m HNO3? _____mL
Answer: Therefore, 70.7 mL of 9.89 M nitric acid solution should be used to prepare 3.50 L of 0.200 M HNO3.
Explanation:
To prepare 3.50 L of 0.200 M HNO3, we need to calculate the amount of HNO3 required and then determine the volume of 9.89 M nitric acid solution needed to prepare this amount of HNO3.
The amount of HNO3 required can be calculated using the formula:
amount of HNO3 (in moles) = volume of solution (in liters) x concentration of HNO3 (in moles per liter)
Substituting the given values:
amount of HNO3 = 3.50 L x 0.200 mol/L = 0.700 mol
Now, we can use the amount of HNO3 and the concentration of the nitric acid solution to calculate the volume of the nitric acid solution needed:
volume of nitric acid solution = amount of HNO3 (in moles) / concentration of nitric acid solution (in moles per liter)
Substituting the given values:
volume of nitric acid solution = 0.700 mol / 9.89 mol/L = 0.0707 L
Finally, we can convert the volume to milliliters:
volume of nitric acid solution = 0.0707 L x 1000 mL/L = 70.7 mL
Therefore, 70.7 mL of 9.89 M nitric acid solution should be used to prepare 3.50 L of 0.200 M HNO3.
Regenerate response
For the following chemical reaction:
In the laboratory, a chemist mixed aqueous barium chloride with aqueous potassium oxide which produced solid barium oxide and aqueous potassium chloride
A. Write the complete balanced chemical equation, including phase labels.
B. Identify the type of reaction that has occurred.
C. Identify the indicator that tells you a chemical reaction has occurred.
Answer:
A. The complete balanced chemical equation, including phase labels, for the reaction is:
BaCl2 (aq) + K2O (aq) → BaO (s) + 2KCl (aq)
B. The type of reaction that has occurred is a double displacement or metathesis reaction. In this reaction, the barium cations (Ba2+) and potassium anions (K+) exchange partners, resulting in the formation of solid barium oxide (BaO) and aqueous potassium chloride (KCl).
C. The indicator that tells you a chemical reaction has occurred is the formation of a solid precipitate. In this reaction, the solid barium oxide (BaO) that forms is a clear indication that a chemical reaction has occurred. Additionally, the fact that the reactants are aqueous and the products include both a solid and an aqueous solution also indicates a chemical reaction has taken place.
Which statement is one of the assumptions of Kinetic Molecular Theory regarding gasses?
A Collisions between gas particles are inelastic.
The temperature of the gas depends on the average potential energy of the gas particles.
Gas particles are much larger than the distance between them.
The volume of a gas sample mostly consists of empty space between the moving gas particles.
The statement that "The volume of a gas sample mostly consists of empty space between the moving gas particles" is one of the assumptions of the Kinetic Molecular Theory regarding gases.
What is Collision?
There are different types of collisions, depending on the nature of the objects involved, the speed and direction of their motion, and the type of contact that occurs. For example, elastic collisions are those in which the total kinetic energy of the colliding objects is conserved, meaning that no energy is lost or gained during the collision. In contrast, inelastic collisions are those in which some of the kinetic energy is transformed into other forms of energy, such as heat or sound.
The Kinetic Molecular Theory is a model that describes the behavior of gases. One of the main assumptions of this theory is that gas particles are in constant random motion and move in a straight line until they collide with other particles or the walls of their container.
Another important assumption of this theory is that the volume of a gas sample mostly consists of empty space between the moving gas particles. This means that gas particles are assumed to be very small compared to the overall volume of the gas sample. Therefore, the particles do not occupy all of the available space in the container, but instead only occupy a small portion of it.
Learn more about Collision from given link
https://brainly.com/question/24915434
#SPJ1
Electrochemical cells generate electricity from which of the following? Select all that apply.
electron transfer
flow of electrons
dissolving an ionic compound
redox reactions
By a redox reaction that involves the transfer of electrons, often through the dissolution of an ionic substance, electrochemical cells produce electricity from the flow of electrons.
What fuels the production of energy by electrochemical cells?In electrochemistry, redox or oxidation-reduction reactions, in which electrons travel from one element to another, can produce electricity. Redox processes involve the transfer of electrons from one substance to another.
In what element are electrochemical cells made?Batteries use a very significant class of oxidation and reduction reactions to produce useable electrical energy. Using solutions of respective sulphates, copper and zinc metals can be combined to create a straightforward electrochemical cell.
To know more about electrons visit:-
https://brainly.com/question/20513633
#SPJ1
Please help :) almost due
The substance is lithium (Li).
Lithium has an atomic number of 3, which corresponds to the number of protons in its nucleus.The atomic masses or mass numbers of the three isotopes of lithium are 6, 7, and 8, respectively. This indicates that the number of neutrons in the nuclei of these isotopes varies.The three isotopes of lithium, 6 Li, 7 Li, and 8 Li, all have three protons in common, but have varying numbers of neutrons in their nuclei, resulting in distinct atomic weights.Isotopes
Isotopes are atoms of the same element with variable numbers of neutrons but the same number of protons in their nucleus.
Hence, although having different atomic masses, they have the same atomic number.
The physical characteristics of an element's isotopes can differ from their chemical characteristics because of their varied atomic masses.
Isotopes include, for instance:
Carbon: There are three isotopes of carbon: carbon-12, carbon-13, and carbon-14. While Carbon-14 is a radioactive isotope, Carbon-12 and Carbon-13 are stable isotopes.There are three isotopes of hydrogen: hydrogen-1 (also known as protium), hydrogen-2 (sometimes known as deuterium), and hydrogen-3 (also known as tritium). Tritium is a radioactive isotope, whereas protium and deuterium are stable isotopes.Three oxygen isotopes are oxygen-16, oxygen-17, and oxygen-18. The most prevalent isotope is oxygen-16.learn more about isotopes here
https://brainly.com/question/29989166
#SPJ1
When a protonated epoxide is attacked by water, the nucleophile attacks from the ___________ in an __________ process.
When a protonated epoxide is attacked by water, the nucleophile attacks from the "top" or "front" of the epoxide ring in an "S_N2" substitution nucleophilic bimolecular process.
What is protonated epoxide ?
A protonated epoxide is a molecule that contains an epoxide ring (a three-membered ring consisting of two carbon atoms and one oxygen atom) that has been protonated, or had a hydrogen ion (H+) added to it.
The protonation of an epoxide ring can occur in the presence of an acidic medium, such as a strong acid like sulfuric acid (H2SO4) or hydrochloric acid (HCl).
In acidic conditions, the lone pair of electrons on the oxygen atom of the epoxide ring can interact with the positively charged hydrogen ion, resulting in the formation of a protonated epoxide.
Learn more about protonated epoxide here : brainly.com/question/21329956
#SPJ1
For the following diagram, select all statements that are true. (Picture provided)
According to given Information:
The energy change of the reaction is -20kJ is true statement, This is exothermic reaction.
What is exothermic?Exothermic meaning that the products of the reaction have lower energy than the reactants.
The negative value of the energy change (-20kJ) indicates that energy is released during the reaction.
What is energy change?Energy change refers to the difference in energy between the products and reactants of a chemical reaction. If the energy change is positive, it means that energy is absorbed by the reaction and the reaction is endothermic.
If the energy change is negative, it means the energy is released by the reaction and the reaction is exothermic. The magnitude of the energy change provides information about the amount of energy that is released or absorbed during the reaction
To know more about exothermic reaction, visit:
https://brainly.com/question/4345448
#SPJ1
Label each of the three parts of this process with a brief description of what the part shows.
The three parts are:
Substrate: The reactants that bind to the enzyme are called substrates. These are the molecules that are acted upon by the enzyme.Enzyme-substrate complex: The complex formed when the substrate binds to the active site of the enzyme. This complex helps to break bonds in the reactants and form new bonds, changing the substrates into products.Product: The end result of the enzyme-catalyzed reaction, formed after the enzyme releases the products.What is the enzymes about?This passage describes the role of enzymes in biological processes. Enzymes are protein molecules that act as catalysts, speeding up chemical reactions without being used up or changed in the process. They do this by binding to specific reactant molecules, called substrates, at a specific site on the enzyme molecule called the active site.
Only substrates that are shaped to fit the active site can bind to the enzyme. When the enzyme and substrate bind together, they form an enzyme-substrate complex, which helps to break bonds in the substrate molecules and form new bonds, resulting in the formation of products.
Therefore, The enzyme then releases the products and is free to bind with other substrates and repeat the process. The passage also notes that enzymes are important in cell processes that supply energy and that their activity can be affected by factors such as pH and temperature.
Read more about enzymes here:
https://brainly.com/question/14577353
#SPJ1
See text below
reactions in the body. Like all catalysts, enzymes
up by the chemical reaction. They can be used again. Also, most enzymes act in just one type of reaction. For example, the enzyme amylase is found in saliva. Amylase helps begin the process of food digestion in the mouth.
The figure below shows how an enzyme works. The reactants that bind to the enzyme are called substrates. The specific location where a substrate binds on an enzyme is called the active site. The substrate and active site are shaped to fit together exactly. Only substrates shaped to fit the active site will bind to the enzyme.
The bond between the enzyme and substrates creates the enzyme-substrate complex. This complex helps to break bonds in the reactants and form new bonds, changing the substrates into products. The enzyme then releases the products.
Enzymes are the chemical workers in cells. The actions of enzymes enable cell processes that supply energy. Factors such as pH and temperature affect enzyme activity.
Copyright © Glencoe/McGraw-Hill, a division of The McGraw-Hill Companies, Inc.
Substrate
Active sites
Substrate Enzyme
Biology online biologygmh.com
Product
Enzyme-substrate complex
Product
Chap
Pi
4
How many significant figures are in 6.07×10^14
Answer:3
Explanation: counting from left to right there is 3 sig figs.
What do the dark areas in the large cells
represent? Explain your reasoning.
Answer:I think your talking about the chromatin
Explanation: There dark
The Kp for the reaction A (g) ⇌ 2 B (g) is 0.0110. What is Kp for the reaction 2 B (g) ⇌ A (g)?
calculate the mole fraction of HCl in a 9.8% (by mass) aqueous solution. the density of the solution is 1.03 g/mL
The mole fraction of HCl in the given solution is 0.051.
What is the mole fraction of the HCL?To calculate the mole fraction of HCl in the given solution, we need to first find the mass of HCl and water present in the solution.
Let's assume we have 100 g of the solution, so 9.8 g of it is HCl, and 90.2 g is water.
Next, we need to find the moles of HCl present in the solution.
To do this, we divide the mass of HCl by its molar mass.
The molar mass of HCl is 36.46 g/mol (1.01 g/mol for hydrogen + 35.45 g/mol for chlorine).
moles of HCl = 9.8 g / 36.46 g/mol = 0.269 mol
The moles of water can be calculated using its molar mass which is 18.015 g/mol.
moles of water = 90.2 g / 18.015 g/mol = 5.005 mol
The total number of moles in the solution is the sum of the moles of HCl and water.
total moles = 0.269 mol + 5.005 mol = 5.274 mol
The mole fraction of HCl can now be calculated by dividing the moles of HCl by the total number of moles.
mole fraction of HCl = 0.269 mol / 5.274 mol = 0.051
Learn more about mole fraction here: https://brainly.com/question/14783710
#SPJ1