if 12.23 g of bromomethane are produced when 5.00 g of methanol is reacted with excess hbr, what is the percentage yield?

From the balanced equation, Mg(s) + 2HCl(aq) -> MgCl2(aq) + H2(g), we can determine the volume of hydrogen gas produced from 3 moles of magnesium metal reacting with the acid at standard temperature and pressure (STP).

According to the balanced equation, 1 mole of magnesium reacts with 1 mole of hydrogen gas. Therefore, 3 moles of magnesium will produce 3 moles of hydrogen gas.

At STP, 1 mole of any gas occupies 22.4 liters. Thus, 3 moles of hydrogen gas will occupy:

3 moles × 22.4 liters/mole = 67.2 liters

So, the volume of hydrogen gas produced is 67.2 liters at STP.

To learn more about metal, refer below:'

https://brainly.com/question/18153051

#SPJ11

Answer: Molecules in which three atoms are arranged in a straight line are said to have linear geometry.

What is a linear molecule?

A linear molecule is a molecule that has three or more atoms arranged in a straight line. Two main groups of linear molecules exist: homonuclear and heteronuclear. A homonuclear linear molecule has two or more identical atoms bonded to the central atom, whereas a heteronuclear linear molecule has two or more distinct atoms bonded to the central atom.

Examples of linear molecules include carbon dioxide (CO2), hydrogen cyanide (HCN), nitrogen dioxide (NO2), and sulfur dioxide (SO2).

Linear geometry is the shape of the molecule, which is governed by its geometry. The distribution of bonding electrons and non-bonding pairs in a molecule determines its shape. For instance, in a molecule with linear geometry, the bond angle between two atoms is 180 degrees (a straight line).


Learn more about linear molecule here:

https://brainly.com/question/16770400#



#SPJ11

The number of moles of Na3PO4 that will be formed would be 2 moles.

The balanced chemical equation for the reaction between NaOH and H3PO4 is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

According to the equation, 3 moles of NaOH react with 1 mole of H3PO4 to produce 1 mole of Na3PO4. Therefore, we can use this ratio to find out how many moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4:

Moles of Na3PO4 = (6 mol NaOH) x (1 mol Na3PO4 / 3 mol NaOH)

= 2 mol Na3PO4

So, 2 moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1

The molarity of the 4.46 L solution containing 9.38 mol of barium chlorate is 2.10 M.

The molarity of a solution is a measure of the concentration of a solute in the solution. It is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, we need to divide the number of moles of the solute by the volume of the solution in liters.

Given that the solution contains 9.38 mol of barium chlorate and has a volume of 4.46 L, we can calculate the molarity (M) as,

Molarity = Number of moles of solute / Volume of solution in liters

Molarity = 9.38 mol / 4.46 L

Molarity = 2.10 M

To know more about Barium Chlorate, here

brainly.com/question/15097261

#SPJ4

Answer: The term for the weighted average mass of all the naturally occurring isotopes of an element is atomic mass.

This is also known as the atomic weight and is the mass of a single atom of the element. It is calculated by taking the weighted average of the masses of all the isotopes of an element.

The isotopes are weighted according to their abundance in nature. The atomic mass is typically expressed in atomic mass units (amu) or in daltons (Da). The atomic mass is an important factor in determining the chemical and physical properties of an element. It is also used in calculating the energy released during nuclear reactions.

Learn more about atomic mass here:

https://brainly.com/question/17067547#


#SPJ11

The Grignard reaction must be kept dry because water will react with the Grignard reagent and terminate the reaction.

Glassware must be dried in an oven prior to the experiment because even small amounts of water can react with the Grignard reagent and terminate the reaction.


In order to ensure the reaction takes place, it is essential to remove all traces of water. This can be accomplished by drying the glassware in an oven. Drying the glassware helps to eliminate any water molecules that may be present on the surface of the glass.

Additionally, the reaction must be kept dry in order to prevent any water molecules in the air from reacting with the Grignard reagent. If water molecules were to come into contact with the Grignard reagent, it would react with the reagent and terminate the reaction.

As a result, keeping the reaction dry and using oven-dried glassware are essential steps in performing a successful Grignard reaction.

To know more about Grignard reaction click on below link:

https://brainly.com/question/30887693#

#SPJ11

Answer:

The -CHO group is known as the aldehyde functional group. Here are some examples of organic compounds containing the -CHO functional group:

Methanal (formaldehyde)

Ethanal (acetaldehyde)

Propanal (propionaldehyde)

Butanal (butyraldehyde)

Pentanal (valeraldehyde)

IUPAC names of the requested compounds are:

4th member of carboxylic acid: butanoic acid

1st member of amide: formamide

3rd member of acid chloride: propanoyl chloride (also known as propionyl chloride)

The IUPAC name of the fourth member of the  series is Butanal

The "-CHO" functional group is known as an aldehyde, and it can be found in a variety of organic compounds. Here are some examples of compounds that contain the "-CHO" functional group:

Methanal (formaldehyde): CH2O

Ethanal (acetaldehyde): C2H4O

Propanal (propionaldehyde): C3H6O

Butanal (butyraldehyde): C4H8O

Pentanal (valeraldehyde): C5H10O

Hexanal (caproaldehyde): C6H12O

Heptanal (enanthic aldehyde): C7H14O

Octanal (caprylic aldehyde): C8H16O

Nonanal (pelargonic aldehyde): C9H18O

Decanal (capric aldehyde): C10H20O

Learn more about functional group:https://brainly.com/question/14618322

#SPJ1

Cephalosporin C is an antibiotic containing multiple functional groups. The functional groups present in this molecular are an amide, an alcohol, and an amine.

An amide is a functional group composed of a carbonyl group (C=O) bound to a nitrogen atom. An alcohol is a functional group composed of an oxygen atom bonded to a hydrogen atom, and an amine is a functional group composed of a nitrogen atom bound to two hydrogen atoms.

The amide functional group is present in cephalosporin C because it contains an amide nitrogen atom connected to a carbonyl carbon atom. The alcohol functional group is present in cephalosporin C because it contains an alcohol oxygen atom connected to a hydrogen atom. The amine functional group is present in cephalosporin C because it contains an amine nitrogen atom connected to two hydrogen atoms.

In conclusion, cephalosporin C is an antibiotic containing multiple functional groups, which are an amide, an alcohol, and an amine.


Learn more about cephalosporin here:

https://brainly.com/question/28895176#


#SPJ11

Answer:

74g.

Explanation:

The volume won't increase by the volume of salt you added, though. This is for many different reasons among them the fact that salt is in grains (with lots of air in between) and the salt dissolving in the water and kind of squeezing in the spaces between water molecules. But the mass should increase by exactly the 19g you added.

The solution to precipitate the barium ion, Ba²⁺, in a water sample is sodium sulfate.

The expected precipitate is BaSO4, or barium sulfate. Barium sulfate is an insoluble salt, which means that when sodium sulfate is added to the water sample, barium sulfate will form and settle out of the solution.

Sodium sulfate reacts with barium ions in the water sample to form the insoluble salt BaSO4 according to the following equation: Ba²⁺ + SO4²⁻ --> BaSO4. Since BaSO4 is insoluble in water, it will settle out of solution.

This process is known as precipitation. Precipitation occurs when a soluble compound is converted to an insoluble one.

To know more about Precipitation click on below link:

https://brainly.com/question/18109776#

#SPJ11

When equal masses of baking soda react with vinegar, lemon juice, and lactic acid, lactic acid will produce the most gas.

Lactic acid is a weak acid that can be used to neutralize baking soda, producing the greatest amount of carbon dioxide gas. When baking soda is mixed with lactic acid, the reaction between the two creates carbon dioxide, a gas.

This reaction is an example of a neutralization reaction, which is when an acid and a base are combined to form a salt and water. When this happens, the acid releases gas, in this case, carbon dioxide.

As lactic acid is the weakest of the three, it will produce the most gas when it reacts with the baking soda.

To know more about neutralization reaction click on below link:

https://brainly.com/question/28970253#

#SPJ11

The concentration of the KOH solution is 1.995 mol/L.

To find the concentration of the KOH solution, we need to calculate the number of moles of KOH in the solution:

Calculate the molecular weight of KOH:

K = 39.1 g/mol

O = 16.0 g/mol

H = 1.0 g/mol

Molecular weight of KOH = 39.1 + 16.0 + 1.0 = 56.1 g/mol

Calculate the number of moles of KOH:

mass of KOH = 224 g

Number of moles = mass/molecular weight = 224/56.1 = 3.99 moles

Calculate the concentration of KOH solution:

Volume of solution = 2 L = 2000 mL

Concentration = number of moles/volume of solution = 3.99 moles/2000 mL = 0.001995 moles/mL or 1.995 mol/L

Therefore, the concentration of the KOH solution is 1.995 mol/L.

To know more about concentration click here:

brainly.com/question/10725862

#SPJ4

Answer: The molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.

The concentration of the glucose solution can be expressed as molarity. Molarity is a measure of the number of moles of solute in one liter of a solution. To calculate the molarity, you need to determine the number of moles of glucose in the solution.

To do this, you need to know the molar mass of glucose, which is 180.156 g/mol. Therefore, 170.1 g of glucose would equal 0.94 moles of glucose.

To calculate the molarity, divide the number of moles of glucose by the volume of the solution. The volume of the solution is 1 liter. Therefore, the molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.

The concentration of a solution can be expressed as molarity, which is a measure of the amount of solute in one liter of a solution. To calculate molarity, you need to know the molar mass of the solute, and divide the number of moles of the solute by the volume of the solution.

In this case, the molar mass of glucose is 180.156 g/mol, and 170.1 g of glucose would equal 0.94 moles of glucose. The volume of the solution is 1 liter, and thus the molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.

Learn more about concentration here:

https://brainly.com/question/10725862#

#SPJ11

Evaporites form as ions (minerals) precipitate out of an evaporating solution. The correct option is B.

Evaporites are minerals that are created as a result of the evaporation of water. The minerals are usually found in salt pans or salt lakes. Salt pans are shallow pans that are usually found in hot and dry regions of the world. In most cases, salt pans are usually found in places where water sources are limited. Evaporites form as ions (minerals) precipitate out of an evaporating solution.

As the water evaporates, it leaves behind salt crystals. Over time, these salt crystals can build up and form a layer of salt. The process of evaporation and deposition can repeat itself many times over the years, resulting in the formation of thick layers of salt.

There are different types of evaporites, and they are classified based on the minerals that are formed. Some of the most common types of evaporites include halite, gypsum, and anhydrite. Halite is the most common type of evaporite, and it is usually found in salt pans and salt lakes. Gypsum and anhydrite are usually found in areas that have been submerged in water for long periods of time.

Know more about Evaporites here:

https://brainly.com/question/22676769

#SPJ11

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

The excess reagent is FeCl₃ and 0.33 moles of FeCl₃ remains unreacted after igniting 3.00 moles of FeCl₃ with 2.00 moles of O₂ gas.

The balanced chemical equation for the reaction between FeCl₃ and O₂ is:

4 FeCl₃ + 3 O₂ → 2 Fe₂O₃ + 6 Cl₂

From the balanced equation, we can see that for every 4 moles of FeCl₃, we need 3 moles of O₂.

To determine what is the excess reagent and how much of it is left over, we need to calculate the amount of each reagent required for complete reaction:

3.00 moles FeCl₃ × (3 moles O₂/4 moles FeCl₃) = 2.25 moles O₂ required

2.00 moles O₂ × (4 moles FeCl₃/3 moles O₂) = 2.67 moles FeCl₃ required

Since we only have 2.00 moles of O₂ available, this is the limiting reagent and there is not enough O₂ to react completely with all 3.00 moles of FeCl₃. Therefore, FeCl₃ is the excess reagent.

The amount of excess reagent remaining can be calculated by subtracting the amount required for complete reaction from the amount initially present:

Excess FeCl₃ = 3.00 moles - 2.67 moles = 0.33 moles

Therefore, there is an excess of 0.33 moles of FeCl₃ remaining unreacted. There is no excess of O₂ remaining, as we started with less than the amount required for complete reaction.

Learn more about excess reagent here: https://brainly.com/question/29109077.

#SPJ11

The nonzero quantity is Heat Transfer.

Heat Transfer is the only quantity that must be nonzero for a constant pressure process at 300K and 1 atm. This is because Heat Transfer is the amount of energy that is required to maintain constant pressure.

All other quantities in this process, such as Work, Internal Energy, and Enthalpy, are zero for a constant pressure process at a given temperature and pressure.

Therefore, the quantity that is nonzero for this constant pressure process at 300k and 1 atm is Heat Transfer.

To know more about Heat Transfer, refer here:

https://brainly.com/question/13433948#

#SPJ11

The complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is known as hydrolysis.

Hydrolysis is the process of breaking down a compound by adding water to it. It is a chemical process in which water reacts with minerals to form new compounds with new structures. The process is a crucial part of the formation of clay minerals. Hydrolysis is a common process in nature and occurs when water reacts with minerals to form new compounds. This reaction occurs in soil, rocks, and other natural materials.

The hydrolysis process breaks down minerals such as feldspar and releases other minerals like aluminum and iron oxides. The hydrolysis of silicate minerals such as feldspar creates clay minerals. This process is responsible for the formation of clay minerals, which are an important component of soil.

Read more about silicate :

https://brainly.com/question/4938885

#SPJ11

Answer:

5.41 M

Explanation:

To calculate the molarity of a saturated solution of NaCl, we first need to calculate the amount of NaCl in the solution:

35.8 g of NaCl per 135.8 g of solution means that the mass of NaCl in the solution is:

mass of NaCl = 35.8 g

The density of the solution is 1.20 g/mL, so the volume of the solution can be calculated as:

volume of solution = mass of solution / density of solution

volume of solution = 135.8 g / 1.20 g/mL

volume of solution = 113.17 mL

Now we need to convert the volume of the solution to liters:

volume of solution = 113.17 mL = 0.11317 L

To calculate the molarity of the solution, we need to know the number of moles of NaCl in the solution. We can calculate this using the formula:

moles of solute = mass of solute / molar mass of solute

The molar mass of NaCl is 58.44 g/mol, so:

moles of NaCl = 35.8 g / 58.44 g/mol

moles of NaCl = 0.612 mol

Now we can calculate the molarity of the solution using the formula:

molarity = moles of solute / liters of solution

molarity = 0.612 mol / 0.11317 L

molarity ≈ 5.41 M

To determine the percent yield, we need to first calculate the theoretical yield of the reaction using stoichiometry, and then divide the actual yield by the theoretical yield and multiply by 100%. The percent yield of the reaction is approximately 84.9%.

Percent yield is a measure of the efficiency of a chemical reaction, calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying by 100%. It represents the percentage of the theoretical amount of product that was actually obtained in a reaction.

The balanced chemical equation is:

2Al + Cr₂O₃ → Al₂O₃ + 2Cr

The molar mass of Cr₂O₃ is 152 g/mol, the molar mass of Al is 27 g/mol, and the molar mass of Cr is 52 g/mol.

We need to determine which reactant is limiting, so we can calculate the theoretical yield based on the amount of limiting reactant. We can do this by calculating the number of moles of each reactant using their molar masses and dividing by their stoichiometric coefficients in the balanced equation:

moles of Cr₂O₃= 44.1 g / 152 g/mol = 0.29 mol

moles of Al = 35.0 g / 27 g/mol = 1.30 mol

From the balanced equation, we see that 1 mole of Cr2O3 reacts with 2 moles of Cr. Therefore, the theoretical yield of Cr is:

moles of Cr produced = 0.29 mol Cr₂O₃x (2 mol Cr / 1 mol Cr₂O₃) = 0.58 mol Cr

mass of Cr produced = 0.58 mol Cr x 52 g/mol = 30.16 g Cr

The percent yield is:

% yield = (actual yield / theoretical yield) x 100%

% yield = (25.6 g Cr / 30.16 g Cr) x 100% = 84.9%

Therefore, the percent yield of the reaction is approximately 84.9%.

To find out more about percent yield, visit:

https://brainly.com/question/17042787

#SPJ1

The Rutherford's model lacks an atom's electrical structure and electromagnetic radiation.

According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called Like planets circle the Sun, electrons also travel a great distance around it. Rutherford discovered that an atom's interior is mostly empty.

Rutherford's alpha scattering experiment did not come to any conclusions on how quickly positively charged particles travel. The nucleus, or core, of the atom contains the positively charged particles.

To know more about Rutherford's model visit:-

https://brainly.com/question/11749615

#SPJ1

Answer:

1) adding a safety switch that automatically turns off the heater when it reaches a certain temperature

2) incorporating reflective material around the heating element to increase heat output.

Explanation:

chatgpt

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

Sodium hypochlorite serves as a bleaching agent. Dyes, humectants, cavity fluid, and phenol are not typically used as bleaching agents.

Bleaching agents are chemicals that are used to remove colors or stains from materials, typically textiles or hard surfaces.

They are commonly used in the washing and cleaning industries, as well as in some industrial processes. Bleach is a compound that removes or lightens colors, brightens whites, and eliminates bacteria and viruses from fabrics, food, drinking water, and hard surfaces such as counters, sinks, and floors.

It is used as a disinfectant to kill bacteria and viruses in both the food and industrial sectors. It is also used to purify drinking water, keep swimming pools clean, and remove discolorations from fabrics and hard surfaces in the home. Sodium hypochlorite is one of the most common bleaching agents used.

Therefore sodium hypochlorite is the correct option.

To learn more about bleaching agents refer - https://brainly.com/question/30587051

#SPJ11

The type of fire that is self-heating is spontaneous combustion. This occurs when a combustible material (such as paper, rags, oil, and even coal) is heated to its ignition temperature through a process of oxidation. The heat produced from the oxidation will then cause the material to burn.

combustion refers to a fire that starts on its own due to heat generated by chemical reactions rather than an external source. This type of fire typically happens in organic materials that produce heat during natural decay, such as hay or wood chips that have been compressed or stored in large quantities. When the heat produced by these chemical reactions surpasses the material's ability to dissipate it, the temperature will keep rising until the material catches fire. The other types of fire are as follows:

Diffusion flame A diffusion flame is a fire that occurs when a fuel source is mixed with air and burned in the presence of an oxidizer. Diffusion flames are common in industry and can be found in applications like boilers, furnaces, and power plants

.Premixed flame A pre-mixed flame is a type of flame that occurs when a fuel source is mixed with air before it is ignited. This type of flame is often used in internal combustion engines.

Smoldering A smoldering fire is a slow, low-temperature flame that occurs when materials like embers or coals continue to burn without visible flame. This type of fire is often found in wildfires, and it can be very dangerous because it can spread underground or in places where people might not see it.

For more such questions on spontaneous combustion , Visit:

https://brainly.com/question/30392290

#SPJ11

If the balloon is popped and all of the CO2 is released, approximately 5.4 grams of CO2 would be released.

At STP (Standard Temperature and Pressure), the pressure is 1 atmosphere (atm) and the temperature is 273.15 K (0 °C or 32 °F).Any ideal gas has a molar volume of 22.4 L/mol at STP.

Carbon dioxide (CO2) seems to have a molar mass of approximately 44 g/mol.

Using the ideal gas law, PV = nRT, we can calculate the number of moles of CO2 in the balloon:

PV = nRT

n = PV/RT

n = (1 atm)(3 L)/(0.0821 L·atm/mol·K)(273.15 K)

n = 0.1226 mol

Therefore, the balloon contains 0.1226 mol of CO2.

To calculate the mass of CO2, we can use the following formula:

mass equates to the number of moles multiplied by the molar massmass = 0.1226 mol x 44 g/mol

mass = 5.4 g

To know more about ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1

The given statement "the lattice energy of a crystal is less than the energy necessary to pull the crystal apart" is false.

The lattice energy of a crystal is greater than the energy necessary to pull the crystal apart because the lattice energy represents the amount of energy released when oppositely charged ions come together to form a crystal lattice structure. In other words, it is the energy released when the cations and anions of an ionic compound come together to form a solid crystal. This energy is strong because of the strong electrostatic attraction between the cations and anions.

On the other hand, the energy required to pull the crystal apart is called the dissociation energy or bond energy, and it represents the energy required to break the bonds between the cations and anions in the crystal lattice. This energy is weaker than the lattice energy because it only involves breaking one bond at a time, while the lattice energy involves breaking all the bonds in the crystal simultaneously. Therefore, the lattice energy is greater than the dissociation energy.

To learn more about lattice energy refer - https://brainly.com/question/30174489

#SPJ11

you need to draw and label a flowchart and carry out a degree-of-freedom analysis of the reactor based on the extent of reaction, then calculate the total moles of gas in the reactor at equilibrium and the equilibrium mole fraction of hydrogen in the product.

If the mole fraction of hydrogen is significantly different from the calculated value, the discrepancy can likely be attributed to an imbalance between the reactants and products.

You can use a numerical method of your choice to take the input of the reactor temperature and the feed component mole fractions of CO, H2O, and CO2 to calculate the mole fraction H2 x in the product gas when equilibrium is reached.

From there, you can adjust the temperature and feed composition to maximize the yield of hydrogen.

To know more about mole fraction click on below link:

https://brainly.com/question/29808190#

#SPJ11