if all the solutions of the inequality x^2-6ax+5a^2

Hello!

[tex]32 = 25x^2 - 4\\\\32 + 4 = 25x^2\\\\36 = 25x^2\\\\25x^2 - 36 = 0\\\\x = \dfrac{-b \±\sqrt{b^2 - 4ac} }{2a} \\\\\\x = \dfrac{-0 \±\sqrt{0^2 - 4 \times 25 \times (-36) } }{2 \times 25} \\\\\\x = \dfrac{\±60}{50} \\\\\boxed{x = \±\frac{6}{5} }[/tex]

Answer:

The total amount with annual compounding is 23,304.79 .

The interest with annual compounding is $18,304.79.

The total amount with semi annual compounding is 24,005.10.

The interest with semi annual compounding is $19,005.10.

The total amount with quarterly compounding is 24,377.20.

The interest with quarterly compounding is $19,377.20.

What are the total amount and interest?

The formula for determining the total amount is:

FV = PV(1 + r/m)^nm

Where:

FV =total amount

PV = amount deposited

r  = interest rate

n  = number of years

m = number of compounding

Interest = FV - amount deposited

FV = 5000 x (1.08)^20 = 23,304.79

Interest = 23,304.79 - 5000 = $18,304.79

FV =5000 x (1.08/2)^(2 x 20) =24,005.10

Interest = 24,005.10 - 5000 = $19,005.10

FV =5000 x (1.08/4)^(20 x 4) =24,377.20

Interest = 24,377.20 - 5000 = $19,377.20

Step-by-step explanation:

There are no zero pairs in the expression.

To calculate the number of zero pairs in statement 9 + (-16), we need to clarify the expression and determine any matching positive and negative numbers.

In this respect, 9 and -16 have unlike signs. To simplify, we can rewrite the expression as 9 - 16, which is similar to adding the opposite of 16.

Here, let's look for zero pairs. A zero pair incorporate a positive and negative number that cancel each other out and occur in a sum of zero.

In the expression 9 - 16, there are no identical positive and negative numbers.

Learn more about pairs here:

https://brainly.com/question/31875891

Using row operations to write the augmented matrix, the value of x, y and z are 2, -12 and 11

To solve the system using row operations, we'll write the augmented matrix and perform row operations to transform it into row-echelon form. Here are the steps:

1. Write the augmented matrix for the system of equations:

  [1  1  -1  |  1]

  [4  -1  1  |  9]

  [1  -3  2  |  -14]

2. Perform row operations to transform the matrix into row-echelon form:

  R2 = R2 - 4R1

  R3 = R3 - R1

  [1  1   -1  |  1]

  [0  -5  5   |  5]

  [0  -4  3   |  -15]

3. Perform row operations to further transform the matrix into row-echelon form:

  R2 = -R2/5

  R3 = -4R2 + R3

  [1  1   -1  |  1]

  [0  1   -1  |  -1]

  [0  0   -1  |  -11]

4. Perform row operations to obtain a diagonal of 1s from left to right:

  R1 = R1 + R3

  R2 = R2 + R3

  [1  1   0  |  -10]

  [0  1   0  |  -12]

  [0  0   -1 |  -11]

5. Perform row operations to transform the matrix into reduced row-echelon form:

  R3 = -R3

  [1  1   0  |  -10]

  [0  1   0  |  -12]

  [0  0   1  |  11]

The resulting matrix corresponds to the system of equations:

x + y = -10

y = -12

z = 11

Therefore, the solution to the given system of equations is x = -10 - y, y = -12, and z = 11.

So, the solution is x = -10 - (-12) = 2, y = -12, and z = 11.

Learn more on augmented matrix here;

https://brainly.com/question/12994814

#SPJ1

IQR, because Sunny Town is symmetric should be used for both sets of data to determine the location with the most consistent temperature?(option a).

1. The question asks for the measure of variability that should be used to determine the location with the most consistent temperature when comparing the data from two different locations.

2. The first option, A, suggests using the Interquartile Range (IQR) because Sunny Town is symmetric. This means that the data in Sunny Town is evenly distributed around the median, indicating consistency in temperatures.

3. The second option, B, proposes using the IQR because Beach Town is skewed. Skewness implies an asymmetrical distribution, which may indicate less consistency in temperatures.

4. The third option, C, suggests using the Range because Sunny Town is skewed. Skewed data in Sunny Town might imply a larger spread and less consistency in temperatures.

5. The fourth option, D, recommends using the Range because Beach Town is symmetric. However, symmetric data indicates consistency, making the Range less suitable as a measure of variability.

6. Considering the explanations for each option, the best choice is A, IQR, because Sunny Town is symmetric. The symmetric distribution suggests that the temperatures in Sunny Town are consistent and evenly distributed around the median.

7. Therefore, the measure of variability that should be used for both sets of data to determine the location with the most consistent temperature is the IQR, as indicated by option A.

For more such questions on symmetric, click on:

https://brainly.com/question/20168388

#SPJ8

The solutions of the system of equations are (2, -1) and (-4, 17)

The given system of equations is:

y = x² - x - 3

y = -3x + 5

To find the solutions, we need to solve these equations simultaneously.

Set the equations equal to each other:

x² - x - 3 = -3x + 5

Simplify and rewrite the equation in standard form:

x² - x + 3x - 3 - 5 = 0

x² + 2x - 8 = 0

Factor the quadratic equation:

(x - 2)(x + 4) = 0

Now we can solve for x by setting each factor equal to zero:

x - 2 = 0 or x + 4 = 0

Solving for x, we get:

x = 2 or x = -4

To find the corresponding y-values, we substitute these x-values into either of the original equations. Let's use equation 1):

For x = 2:

y = (2)² - 2 - 3 = 4 - 2 - 3 = -1

For x = -4:

y = (-4)² - (-4) - 3 = 16 + 4 - 3 = 17

As a result, the system of equations has two solutions: (2, -1) and (-4, 17).

The right responses are therefore (2, -1) and (-4, 17).

for such more question on system of equations

https://brainly.com/question/4262258

#SPJ8

a. For a score of X = 70, a standard deviation of σ = 4 would give a better grade.

b. For a score of X = 80, both standard deviations would give the same grade.

a. To determine which standard deviation would give a better grade for a score of X = 70, we can compare the z-scores associated with each standard deviation.

The z-score measures the number of standard deviations a given value is from the mean.

For σ = 4:

Z = (X - μ) / σ

Z = (70 - 78) / 4

Z = -2  

For σ = 8:

Z = (X - μ) / σ

Z = (70 - 78) / 8

Z = -1

The z-score for σ = 4 is -2, while the z-score for σ = 8 is -1. A higher z-score indicates a better grade since it represents a score that is further above the mean.

Therefore, in this case, a standard deviation of σ = 4 would give a better grade.

b. Similarly, for a score of X = 80:

For σ = 4:

Z = (X - μ) / σ

Z = (80 - 78) / 4

Z = 0.5

For σ = 8:

Z = (X - μ) / σ

Z = (80 - 78) / 8

Z = 0.25.

The z-score for σ = 4 is 0.5, while the z-score for σ = 8 is 0.25.

Again, a higher z-score indicates a better grade.

Therefore, in this case, a standard deviation of σ = 4 would give a better grade.

In both scenarios, a standard deviation of σ = 4 would result in a better grade compared to σ = 8.

For similar question on standard deviation.

https://brainly.com/question/30403900

#SPJ8

The cosine function repeats its pattern every 2π radians (or 360 degrees), we can say that the period of y = cos(x) is 2π.

The period of the function y = cos(x) is 2π.

To understand the period of the cosine function, we need to examine its graph. The cosine function is a periodic function that oscillates between -1 and 1 as x varies. It repeats its pattern over regular intervals.

The cosine function completes one full cycle from 0 to 2π radians (or 0 to 360 degrees). This means that within this interval, the cosine function goes through one complete oscillation, starting from its maximum value of 1, then going through its minimum value of -1, and returning back to 1.

Since the cosine function repeats its pattern every 2π radians (or 360 degrees), we can say that the period of y = cos(x) is 2π.

This means that for any value of x, the value of cos(x) will repeat after an interval of 2π.

for such more question on function

https://brainly.com/question/13473114

#SPJ8

The correct statement is C. The mean of East Hills HS is greater than the mean of Southview HS. So, option C is the correct answer.

To compare the centers of the distributions, we need to consider the measures of central tendency such as the median and the mean.

Looking at the given information about the class sizes at East Hills HS and Southview HS:

East Hills HS class sizes: 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44

Southview HS class sizes: 0, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44

Let's compare the measures of central tendency:

Median: The median is the middle value of a dataset when arranged in ascending or descending order. In this case, both datasets have an odd number of values, so the median is the middle value.

For East Hills HS: Median = 34

For Southview HS: Median = 34

Therefore, the medians of both distributions are the same.

Mean: The mean is calculated by summing all the values in the dataset and dividing by the total number of values.

For East Hills HS: Mean = (24 + 26 + 28 + 30 + 32 + 34 + 36 + 38 + 40 + 42 + 44) / 11 ≈ 35.727

For Southview HS: Mean = (0 + 24 + 26 + 28 + 30 + 32 + 34 + 36 + 38 + 40 + 42 + 44) / 12 ≈ 33.667

Therefore, the mean of East Hills HS is greater than the mean of Southview HS.

Based on the comparisons, the correct statement is:

C. The mean of East Hills HS is greater than the mean of Southview HS.

So, option C is the correct answer.

for such more question on distributions

https://brainly.com/question/25224028

#SPJ8

The question is asking for comparison of the centers and range of two data sets - the class sizes at two different high schools. Because no specific numeric data given for the mean and median of both school sizes, it's not possible to definitively choose an answer. Theoretically, if Southview has a higher concentration at larger class sizes, its median and mean might be larger.

This question refers to comparing the statistical centers (mean and median) and range of two data sets, which are the class sizes at East Hills High School and Southview High School. The centers and range of a data distribution tell us about the typical values, variety, and spread in the data set.

Without actual numbers (i.e., mean and median) for both the East Hills HS and Southview HS distributions, we can't definitively answer this question. However, let's assume that the representations provided suggest that Southview HS has a higher concentration of students in larger class sizes. In that case, the mean and median for Southview HS could be greater than those for East Hills HS, which would suggest option A and D. With regards to the range, if the minimum and maximum values of class sizes are the same in both schools, then the range, which is the difference between the maximum and minimum, would be the same. Therefore, option B wouldn't be accurate. However, as previously mentioned, this can only be suggestive as actual numbers are required for a definite answer.

https://brainly.com/question/31538429

#SPJ2

Answer:

52500

Step-by-step explanation:

Let there be x employees in the previous year

Now, the company has 32% more employees whis is 69300

i.e.

[tex]x + \frac{32}{100} x = 69300\\\\ \implies\frac{132x}{100} = 69300 \\\\\implies 132x = 6930000\\\\\implies x = \frac{6930000}{132}\\[/tex]

⇒ x = 52500

There were 52500 employees in the previous year

Answer:540 degrees

The sum of the measures of the angles of a five-sided polygon (pentagon) is 540 degrees123. This can be calculated using the angle sum formula, S = (n − 2) × 180°, where n is the number of sides in the polygon12. Since a pentagon has five sides, the sum of the interior angles is (5 − 2) × 180° = 540°123.

Step-by-step explanation:

Answer:

540°

Step-by-step explanation:

Since a pentagon has n=5 sides, then we have:

[tex]180(n-2)=180(5-2)=180(3)=540^\circ[/tex]

The mass of the sea glass in the box is 1265 grams.

To find the mass of the sea glass in grams, we need to subtract the mass of the empty box from the total mass of the box with the sea glass. Let's convert all the units to grams for consistency.

Mass of the empty box = 235 grams

Total mass of the box with sea glass = 1 1/2 kilograms = 1.5 kilograms = 1500 grams

To determine the mass of the sea glass, we subtract the mass of the empty box from the total mass:

Mass of the sea glass = Total mass of the box with sea glass - Mass of the empty box

Mass of the sea glass = 1500 grams - 235 grams

Performing the subtraction:

Mass of the sea glass = 1265 grams

To learn more about kilograms

https://brainly.com/question/9301317

#SPJ8

The speed of Jake's initial trip is x = 24 kilometers per hour, and the speed of the return trip is x + 6 = 30 kilometers per hour.

Let's assume that Jake's speed during the initial trip is represented by "x" kilometers per hour.

On the return trip, he drives 6 kilometers per hour faster, so his speed can be represented as "x + 6" kilometers per hour.

To find the time taken for each trip, we can use the formula Time = Distance / Speed.

For the initial trip, the time taken is 120 kilometers divided by x kilometers per hour, which gives us 120/x hours.

On the return trip, the time taken is 120 kilometers divided by (x + 6) kilometers per hour, which gives us 120/(x + 6) hours.

According to the problem, the return trip takes 1 hour less than the initial trip. So we can set up the equation:

120/x - 1 = 120/(x + 6)

To solve this equation, we can multiply both sides by x(x + 6) to eliminate the denominators:

120(x + 6) - x(x + 6) = 120x

Simplifying this equation:

120x + 720 - x² - 6x = 120x

Combining like terms:

x² + 6x - 720 = 0

Now we can solve this quadratic equation by factoring or using the quadratic formula. By factoring, we find:

(x + 30)(x - 24) = 0

This gives us two potential solutions: x = -30 or x = 24.

Since speed cannot be negative, we discard the solution x = -30.

Therefore, the speed of Jake's initial trip is x = 24 kilometers per hour, and the speed of the return trip is x + 6 = 30 kilometers per hour.

So, Jake drives at a speed of 24 kilometers per hour on the initial trip and 30 kilometers per hour on the return trip.

For similar question on speed.

https://brainly.com/question/29483294  

#SPJ8

a. The t-value is 1.895.

b. The t-value is 1.734.

c. The t-value is 2.898.

To calculate the t-statistic for a confidence interval, we first need to determine the degrees of freedom (df), which depends on the sample size minus one. We can then use a t-distribution table, software, or calculator to find the t-value at the desired confidence level and degrees of freedom.

a. For a 90% confidence interval with 8 observations, the degrees of freedom is 7. Using the t-distribution table or calculator,

b. For a 90% confidence interval with 18 observations, the degrees of freedom is 17. Using the t-distribution table or calculator,

c. For a 99% confidence interval with 18 observations, the degrees of freedom is 17. Using the t-distribution table, software, or calculator,

Note that as the sample size increases, the degrees of freedom increase and the t-value approaches the value of the standard normal distribution for large sample sizes. This means that for large sample sizes, we can use the z-value instead of the t-value in confidence interval calculations.

For such more questions on value

https://brainly.com/question/843074

#SPJ8

The mean is the measure that gives the most accurate picture of the data's center. It is an essential measure of central tendency that represents the arithmetic average of a dataset.

It is calculated by summing up all the values in the dataset and dividing the sum by the total number of values. The mean is suitable for datasets that have a normal or symmetrical distribution.

The mean is highly sensitive to outliers, which can significantly influence the average value. When outliers are present, it is appropriate to use other measures of central tendency such as the median or mode to obtain an accurate picture of the data's center.

The median is the middle value in a dataset arranged in ascending or descending order. It is not affected by outliers and is suitable for datasets with skewed distributions.

The mode is the most frequent value in the dataset. It is suitable for categorical data but can also be used for continuous data.

In summary, the mean is the most accurate measure of central tendency, but its accuracy can be improved by using the median or mode in datasets with outliers or skewed distributions.

For more such questions on arithmetic average

https://brainly.com/question/29903655

#SPJ8

The area of the garden is 135 square yards.

Let's imagine you have a rectangular garden measuring 15 yards in length and 9 yards in width.

You want to find the area of this garden, which represents the amount of space inside the garden.

To find the area of a rectangle, you multiply the length by the width.

In this case, the length is 15 yards and the width is 9 yards.

Area = Length × Width

Area = 15 yards × 9 yards

Area = 135 square yards

This means that the garden can hold 135 square yards of grass, flowers, or any other objects you place inside it.

It's worth noting that the unit of measurement for area is always squared, such as square yards in this example.

This is because area is a two-dimensional measurement, representing the space within a flat surface.

By using the formula to calculate the area of a rectangle, you can easily determine the amount of space enclosed by any rectangular area when given the length and width.

For similar questions on garden

https://brainly.com/question/85907

#SPJ8

Answer:

Step-by-step explanation:

To simplify the expression, we can combine the square roots and simplify the exponents.

Starting with the expression:

3√(16x^7) * 3√(12x^9)

Let's simplify each term separately:

Simplifying 3√(16x^7):

The index of the radical is 3, so we need to group the terms in sets of three. For the variable x, we have x^7, which can be grouped as x^6 * x.

Now, let's simplify the number inside the radical:

16 = 2^4, and we can rewrite it as (2^3) * 2 = 8 * 2.

So, 3√(16x^7) becomes:

3√(8 * 2 * x^6 * x) = 2 * x^2 * 3√(2x)

Simplifying 3√(12x^9):

Again, the index of the radical is 3, and we group the terms in sets of three. For the variable x, we have x^9, which can be grouped as x^6 * x^3.

Now, let's simplify the number inside the radical:

12 = 2^2 * 3.

So, 3√(12x^9) becomes:

3√(2^2 * 3 * x^6 * x^3) = 2 * x^2 * 3√(3x^3)

Now we can multiply the simplified terms together:

(2 * x^2 * 3√(2x)) * (2 * x^2 * 3√(3x^3))

Multiplying the coefficients: 2 * 2 * 3 = 12.

Multiplying the variables: x^2 * x^2 = x^4.

Now, let's combine the square roots:

3√(2x) * 3√(3x^3) = 3√(2x * 3x^3) = 3√(6x^4).

Therefore, the simplified expression is:

12x^4 * 3√(6x^4)

The group of individuals fitting a description is called option D: Population, this is because, in statistics, a population is seen as am entire group of individuals, items, or elements that tends to have or share a common characteristics.

The term "population" describes the complete group of people or things that you are interested in investigating. It is the group of individuals or thing(s) about which you are attempting to draw conclusions.

There are infinite and finite populations. A population with a set quantity of people or things is said to be finite. An endless population is one that has an infinite amount of people or things.

Therefore, the correct option is D

Learn more about population here:

brainly.com/question/25630111

#SPJ1

See full text below

A group of individuals fitting a description is the _____

Which of the term below fit the description above.

A.census

B.sample

C.parameter

D.population

The elliptical ceiling is approximately 30 ft high at the center.

To find the height of the elliptical ceiling at the center, we can use the properties of an ellipse.

In this case, the two foci of the ellipse represent the positions where Juan and his friend are standing.

The distance between the two foci is 80 ft, and Juan is 20 ft away from the nearest wall.

This means that the sum of the distances from any point on the ellipse to the two foci is constant and equal to 80 + 20 = 100 ft.

Since Juan is standing at one focus and the distance to the nearest wall is given, we can determine the distance from Juan to the farthest wall by subtracting the distance to the nearest wall from the sum of the distances.

Distance from Juan to the farthest wall = 100 ft - 20 ft = 80 ft.

The height of the elliptical ceiling at the center is equal to half of the distance between the nearest and farthest walls.

Height of elliptical ceiling = (80 ft - 20 ft) / 2 = 60 ft / 2 = 30 ft.

For similar question on elliptical ceiling.

https://brainly.com/question/31366898  

#SPJ8

The average rate of change of f(x) is less than average rate of change of g(x). Then the correct option is A.

A statement, principle, or policy that creates the link between two variables is known as a function. Functions are found all across mathematics and are required for the creation of complex relationships.

The function f(x) is given in the table, then the rate of change of the function f(x) will be

[tex]\text{Rate of change of f(x)} = \dfrac{(-2 + 4.5)}{(-2 + 3)}[/tex]

[tex]\text{Rate of change of f(x)} = 2.5[/tex]

If function g is a quadratic function that contains the points (-3, 5) and (0, 14).

Then the rate of change of the function g(x) will be

[tex]\text{Rate of change of g(x)} = \dfrac{(14 - 5)}{(0 + 3)}[/tex]

[tex]\text{Rate of change of g(x)} = \dfrac{9}{3}[/tex]

[tex]\text{Rate of change of g(x)} = 3[/tex]

Thus, the average rate of change of f(x) is less than average rate of change of g(x).

Then the correct option is A.

To know more about the function, the link is given below.

https://brainly.com/question/31062578

Answer:

The range of this graph is (-4, 6], or

-4 < y < 6.

The range of the graph is [-4, 6].

In Mathematics and Geometry, a range is the set of all real numbers that connects with the elements of a domain.

This ultimately implies that, a range simply refers to the set of all possible output numerical values (real numbers), which are shown on the y-coordinate (y-axis) of a graph.

Based on the information provided in this scenario, the domain and range of the graph of this equation can be determined are as follows:

Domain = [1, 10] or 1 ≤ x < 10

Range = [-4, 6], or -4 < y ≤ 6.

Therefore, the range can be rewritten as [-4, 6].

Read more on range here: brainly.com/question/10684895

#SPJ1

Answer:

[tex]\frac{3}{7}[/tex] <  [tex]\frac{3}{5}[/tex]

Step-by-step explanation:

[tex]\frac{3}{7}[/tex] ? [tex]\frac{3}{5}[/tex]

We have to get both fractions with the same denominator to compare them.

[tex]\frac{3}{7}[/tex] = [tex]\frac{15}{35}[/tex]

[tex]\frac{3}{5}[/tex] = [tex]\frac{21}{35}[/tex]

[tex]\frac{15}{35} < \frac{21}{35}[/tex]

So, [tex]\frac{3}{7}[/tex] <  [tex]\frac{3}{5}[/tex]

Answer: seconds

Step-by-step explanation:

Step-by-step explanation:

To solve this problem, we need to use the product rule of differentiation and some trigonometric identities. Let's start by finding the derivative of y with respect to x:

y = (sin 2x) √(3+2x)

Using the product rule, we get:

dy/dx = (sin 2x) d/dx(√(3+2x)) + (√(3+2x)) d/dx(sin 2x)

To find these derivatives, we need to use the chain rule and the derivative of sin 2x:

d/dx(√(3+2x)) = (1/2√(3+2x)) d/dx(3+2x) = (1/√(3+2x))

d/dx(sin 2x) = 2cos 2x

Substituting these values, we get:

dy/dx = (sin 2x) / √(3+2x) + 2cos 2x (√(3+2x))

Now, we need to simplify this expression to the desired form. To do that, we can use the trigonometric identity:

sin 2x = 2sin x cos x

Substituting this value, we get:

dy/dx = 2sin x cos x / √(3+2x) + 2cos 2x (√(3+2x))

Now, we can use the trigonometric identity:

cos 2x = 1 - 2sin^2 x

Substituting this value, we get:

dy/dx = 2sin x cos x / √(3+2x) + 2(1 - 2sin^2 x)(√(3+2x))

Simplifying further, we get:

dy/dx = (2cos x - 4cos x sin^2 x) / √(3+2x) + 2√(3+2x) - 4sin^2 x√(3+2x)

Now, we can see that this expression matches the desired form:

dy/dx = sin 2x + (4 + Bx)cos 2x / √(3+2x)

where A = -4 and B = -2. Therefore, we have shown that:

dy/dr = sin 2x + (4 - 2x)cos 2x / √(3+2x)

where A = -4 and B = -2.

The solution to the system is (a) a = 4/5, b = 5, c = -4 and d =-4

From the question, we have the following parameters that can be used in our computation:

The augmented matrix

Where, we have

[tex]\left[\begin{array}{cccc|c}1&0&0&0&4/5\\0&1&0&0&5\\0&0&1&0&-4\\0&0&0&1&-4\end{array}\right][/tex]

From the above, we have the diagonals to be 1

And other elements to be 0

This means that the equation has been solved

So, we have

a = 4/5, b = 5, c = -4 and d =-4

Read more about matrix at

https://brainly.com/question/11989522

#SPJ1

The percentile of 6.2 in the given data set is 40%.

To determine the percentile of 6.2 in the given data set, we can use the following steps:

Arrange the data set in ascending order:

4.2, 4.6, 5.1, 6.2, 6.3, 6.6, 6.7, 6.8, 7.1, 7.2

Count the number of data points that are less than or equal to 6.2. In this case, there are 4 data points that satisfy this condition: 4.2, 4.6, 5.1, and 6.2.

Calculate the percentile using the formula:

Percentile = (Number of data points less than or equal to the given value / Total number of data points) × 100

In this case, the percentile of 6.2 can be calculated as:

Percentile = (4 / 10) × 100 = 40%

The percentile of 6.2 in the sample data set is therefore 40%.

for such more question on percentile

https://brainly.com/question/24877689

#SPJ8

The proportion by which the later temperature exceeds the earlier temperature is 3/5 or 3:5.

To determine the proportion by which one temperature exceeds the other, we need to calculate the difference between the two temperatures and express it as a proportion of the starting temperature.

First, calculate the temperature difference between 7:00 am and 3:00 pm:

temperature difference = 24°C - 15°C = 9°C

Now, express the temperature difference as a proportion of the starting temperature (15°C).

Proportion = Temperature difference / Starting temperature

Proportion = 9/15

Proportion = 3/5

Learn more about proportion on:

brainly.com/question/1781657

#SPJ1

Question in English

In a city the temperature was measured at 7:00 am and the value was 15°C, then it was measured at 3:00 pm the value was 24°C. Starting from the level of measurement of this variable, in what proportion does one temperature exceed the other, analyze your answer.