The type of cable that would be used to connect the scanner to the switch would depend on the type of interface supported by the scanner and the switch.
What happens if both devices support Ethernet connectivity?If both devices support Ethernet connectivity, then an Ethernet cable would be used. The most common type of Ethernet cable used for this purpose is a twisted pair cable with an RJ-45 connector on each end.
However, if the scanner uses a different interface, such as USB, then a USB cable would be required instead. It is important to ensure that the cable used is compatible with both devices to ensure proper communication.
Read more about LAN topology here:
https://brainly.com/question/30255438
#SPJ1
What are examples of digital quantities?
Examples of digital quantities include Pixels, Bytes, Binary, Sound sample
Digital quantities are those quantities unlike continuous ranges of values, that may only take on discrete, distinct values or levels. That means they can only be stated in the binary form of 0 and 1. They are crucial to the operation of digital systems.
Examples of digital quantities :
Binary digit: The smallest unit of digital data is a binary digit (bit), which can only represent one of two possible values either 0 or 1.Bytes: 8-bit units which can each represent one of 256 possible values.Pixels: They are the smallest unit of a digital image that can be switched on or off. Red, green, and blue (RGB) values are commonly used to represent each individual color value that each pixel represents.Text characters - expressed in digital forms such as ASCII or Unicode values.Time intervals - quantities that represent a specific period of time, usually in units of seconds, milliseconds, or microseconds.To learn more about Binary,
https://brainly.com/question/26668609
cryptocurrency allows people to share a digital ledger across a network of computers without a central source of control because no single entity has the ability to tamper with the records. group startstrue or falsetrue, unselectedfalse, unselected
The given statement "Cryptocurrency allows people to share a digital ledger across a network of computers without a central source of control because no single entity has the ability to tamper with the records" is true because cryptocurrency is a digital asset designed to work as a medium of exchange wherein every single transaction is verified using cryptography.
It operates independently of a central bank. Cryptocurrencies use blockchain technology that allows the user to conduct secure and transparent transactions without the need for a middleman. This technology ensures that no one can tamper with the records, making the system secure and trustworthy.
Cryptocurrencies have the advantage of offering transparency, low transaction fees, decentralization, and the elimination of central authorities that could manipulate the system to their advantage.
In conclusion, the statement that "Cryptocurrency allows people to share a digital ledger across a network of computers without a central source of control because no single entity has the ability to tamper with the records" is true.
For such more question on network:
https://brainly.com/question/29352369
#SPJ11
the diagnose/repair function of windows firewall with advanced security allows users to troubleshoot which of the following components? (choose all that apply.) a. network adapter b. shared folders c. web browser d. internet connections
The diagnose/repair function of Windows Firewall with Advanced Security enables users to troubleshoot the following components: network adapter and internet connections. The correct answers A and D.
Windows Firewall with Advanced Security is a built-in firewall solution included in Windows operating systems. It provides advanced security features for network traffic, including inbound and outbound traffic filtering, as well as customizable firewall rules.
The diagnose/repair function of the Windows Firewall with Advanced Security allows users to troubleshoot network-related issues, including problems with the network adapter and internet connections. It analyzes the network configuration and provides suggestions for resolving connectivity issues. However, it does not diagnose or repair issues related to shared folders or web browsers.
Users can access the diagnose/repair function by opening the Windows Firewall with Advanced Security control panel and selecting the "Monitoring" option from the left-hand menu. From there, they can select the "Troubleshooting" option and follow the prompts to diagnose and resolve network connectivity issues. The correct answers A and D.
Learn more about Windows firewall:
https://brainly.com/question/10431064
#SPJ11
A process called _____ converts analog sound waves into digital sound.
The process called analog-to-digital conversion (ADC) converts analog sound waves into digital sound.
The analog-to-digital conversion (ADC) process involves sampling the analog signal at regular intervals and converting the amplitude of each sample into a digital value. The resulting digital signal can be processed, stored, and transmitted more efficiently and accurately than analog signals. ADC is widely used in various applications, such as music recording, speech recognition, and telecommunication, among others, to capture and process analog signals in digital form.
You can learn more about analog-to-digital conversion (ADC) at
https://brainly.com/question/27627436
#SPJ11
the number of binary digits of an integer n is approximately equal to: group of answer choices log10n 2n 8n log8n log2n
The number of binary digits of an integer n is approximately equal to log2n.
This is because the number of binary digits of an integer n is equal to the base-2 logarithm of the number, i.e., the exponent of 2 that yields n when raised to it. For example, if an integer is equal to 64, then log2 64 = 6, since 2^6 = 64. In other words, the binary representation of an integer is the same as the power of two required to produce it. Thus, the number of binary digits of an integer n is approximately equal to log2n.
The other choices are not valid answers as they do not take into account the base-2 logarithm of the number. For instance, 2n means 2 multiplied by n, which is not equal to the number of binary digits. Similarly, log10n and log8n are incorrect answers as they are the base-10 and base-8 logarithms of n, respectively, and do not take into account the base-2 logarithm.
Learn more about binary digits:https://brainly.com/question/16612919
#SPJ11
on a single processor system what do we refer to as a functionality that allow multiple tasks to make progress?
On a single processor system, we refer to the functionality that allows multiple tasks to make progress as multitasking.
Multitasking is a feature of modern operating systems that enables multiple programs or processes to run simultaneously on a single processor system. This is achieved by dividing the processor's time and resources among the various tasks, allowing each task to make progress.There are several types of multitasking, including preemptive multitasking, where the operating system interrupts running tasks to allow other tasks to run, and cooperative multitasking, where tasks voluntarily yield control of the processor to allow other tasks to run.Multitasking enables users to run multiple programs or applications simultaneously, allowing them to be more productive and efficient. For example, a user can browse the web, listen to music, and edit a document all at the same time, without having to close one program to open another. multitasking is a critical functionality that allows a single processor system to make the most of its resources and improve user productivity.
To learn more about multitasking click the link below:
brainly.com/question/13105623
#SPJ4
frank and john have started a secret club together. they want to ensure that when they send messages to each other, they are truly unbreakable. what encryption key would provide the strongest and most secure encryption?
The strongest and most secure encryption key would be a one-time pad (OTP).
This encryption technique uses a randomly generated key that is at least as long as the message itself, and can only be used once. The key is shared between the sender and the receiver and used to encrypt and decrypt the message. Because the key is random and used only once, it is nearly impossible for an attacker to crack the encryption. However, the key must be kept secret and protected to maintain the security of the message.
Cryptographic algorithms employ encryption keys, which are strings of data (bits), to encode (encrypt) and decode (decrypt) data. Data that has been encrypted is illegible without the necessary decoding, making it very safe and challenging for hackers to access.
Learn more about encryption key: https://brainly.com/question/30011139
#SPJ11
18) write a query that produces the first name, last name, address, city, postal code of every customer who made a payment between $10 and $12. each customer should be listed only once.
Here is the SQL query that produces the first name, last name, address, city, postal code of every customer who made a payment between $10 and $12.
Each customer should be listed only once.`
``SELECT c. first_name, c. last_name, a. address, a. city, a. postal_code
FROM customer c INNER JOIN address a ON c. address_id = a. address_idINNER JOIN payment p ON c. customer_id = p.customer_id
WHERE p. amount BETWEEN 10 AND 12GROUP BY c. customer_id;
```Here is the explanation for the code:
We use the SELECT statement to display the first name, last name, address, city, and postal code of every customer.
The INNER JOIN is used to join the customer table with the address table and the payment table. Then we use the WHERE clause to get only those records where the payment amount is between $10 and $12.
Finally, we use the GROUP BY clause to get unique records by customer_id.
For more such questions on SQL query , Visit:
https://brainly.com/question/25694408
#SPJ11
A company has tasked a network administrator with running Ethernet cabling in an enterprise and is told to use the most popular type of network cable with an insulated jacket. Which of the following should the administrator use?
a. UTP
b. Port scanner. c. Network sniffer.
The network administrator tasked with running Ethernet cabling in an enterprise should use UTP (unshielded twisted pair) cable with an insulated jacket.
Explanation:
What is Ethernet?
Ethernet is a set of protocols for connecting devices to form a local area network (LAN). It uses a wired connection and is typically faster and more reliable than wireless connections. Ethernet requires network cables to transmit data between devices.
What is a network cable?
A network cable is a cable used to connect devices on a network. It typically has connectors on each end that plug into Ethernet ports on devices like computers, routers, and switches. The most common types of network cables are UTP and STP.
What is an insulated jacket?
An insulated jacket is a protective coating around the outside of a cable. It provides protection against damage from physical wear and tear, environmental factors, and interference. The most common type of insulated jacket for network cables is PVC (polyvinyl chloride).
The network administrator tasked with running Ethernet cabling in an enterprise should use UTP (unshielded twisted pair) cable with an insulated jacket. This is the most popular type of network cable used for Ethernet connections.
Learn more about UTP here:
https://brainly.com/question/15123056
#SPJ11
which excel features can you use to extend a formula into a range with autofill? select all the options that apply.
Excel features that can be used to extend a formula into a range with Autofill include dragging the fill handle, using the Ctrl + D shortcut key to fill down, and using the Ctrl + R shortcut key to fill right.
What is shortcut key?/
A shortcut key is a key or combination of keys on a computer keyboard that performs a specific command or function in a software application, often allowing the user to perform a task more quickly and efficiently than using a mouse or navigating through menus.
The Excel features that can be used to extend a formula into a range with Autofill are:
To know more about Excel visit:
https://brainly.com/question/30324226
#SPJ1
the maximum value of date in the station day 1116.dta is equal to 20819. what calendar date does this correspond to (the dates below are formatted year-month-day)? g
The maximum value of date in the station day 1116.dta is equal to 20819. The calendar date it corresponds to (formatted as year-month-day) is 2027-12-31.
Given,
The maximum value of date in the station day 1116.
dta is equal to 20819.
Here, it is asked to find the calendar date this corresponds to (formatted as year-month-day).To find the calendar date, we will use the following steps:
Step 1: Find the date that corresponds to the maximum value of date in the station day 1116.dta.Step 2: Convert the date to the required format (year-month-day).Step 1:
We know that stata internally stores dates as the number of days since January 1, 1960. Therefore, to convert the maximum value of date in the station day 1116.dta to a calendar date, we need to add this number to January 1, 1960.For instance, the command `display dailydate(20819)` will display the output `31dec2027`.This means that the maximum value of date in the station day 1116.dta corresponds to December 31, 2027.Step 2:
To convert the date to the required format (year-month-day), we write the date as `2027-12-31`.Therefore, the calendar date that corresponds to the maximum value of date in the station day 1116.dta is 2027-12-31.Learn more about command: https://brainly.com/question/30006106
#SPJ11
which delivery method is used to transmit information to one or more end devices, but not all devices on the network? the devices that receive the message subscribe to this address
The delivery method that is used to transmit information to one or more end devices, but not all devices on the network, and the devices that receive the message subscribe to this address is known as multicast.
Multicast is a network communication protocol that sends data to a group of recipients simultaneously, known as a multicast group. A single sender can use multicast to transmit a single message to a multicast group rather than to each recipient separately.
Multicast is used to distribute data and real-time multimedia applications like video and audio. It can be used to transmit data to a group of hosts that are located across different networks and domains, and it is scalable as more hosts can join or leave the multicast group dynamically.
For such more question on multicast:
https://brainly.com/question/14307076
#SPJ11
if you have made a web purchase such as with amazon you have experienced some of the functionality of a crm system where the vendor keeps track of your name, address, and purchases. true or false
The given statement, "if you have made a web purchase such as with amazon you have experienced some of the functionality of a CRM system where the vendor keeps track of your name, address, and purchases" is True.
What exactly is a web purchase?A web purchase is an online transaction for a product or service. Because of the ease they provide, web purchases have grown in popularity. Customers may browse for things from the convenience of their own homes, and the items are subsequently delivered to their door.
CRM is an abbreviation for customer relationship management. A CRM system is a tool for managing an organization's customer relations. It keeps track of a customer's interactions with the company, such as purchase history, support tickets, and other types of engagement.
A CRM system may help a company better understand its customers' demands and enhance its interactions with them. Because the business has a complete picture of each customer's history with the firm, it can customize its approach to each client and improve their experience.
Learn more about CRM systems:
https://brainly.com/question/14394997
#SPJ11
assume the pc has the address 0x021c when fetch instruction phase begins. after that first instruction executes, which one describes the second instruction to execute?
The second instruction to execute after the first instruction has been executed is determined by the program counter (PC) value.
Assuming the PC has the address 0x021c when the fetch instruction phase begins, the second instruction to execute would be the one located at the memory location with the address 0x021e.
Since the first instruction has been executed, the PC will be incremented by the size of the instruction, which is usually four bytes for a 32-bit machine. Thus, the new PC value will be 0x021e, and the processor will fetch the instruction located at the memory location with the address 0x021e as the second instruction to execute.
In summary, the sequence of events is as follows: At the beginning of the fetch instruction phase, the PC has the value 0x021c. The first instruction is fetched from memory and executed.
The PC is incremented by the size of the instruction, usually four bytes, to give a new PC value of 0x021e. The second instruction is fetched from memory and executed. The process repeats until the end of the program is reached or an error occurs.
To learn more about the instruction phase: https://brainly.com/question/10854404
#SPJ11
q2. short answer: how does a host (source) determine if the destination packet is local or remote?
The host (source) will use the network address of the destination packet to determine if it is local or remote.
In a network, each host has its own network address, and the hosts in the same network share the same network address prefix. When the host (source) receives the destination packet, it will check the network address prefix of the packet. If the network address prefix of the destination packet matches with its own, the host (source) will determine the packet to be local; if not, it will determine the packet to be remote.
To illustrate, if the network address prefix of the destination packet is 192.168.0.0/24 and the host (source) is also in the same network with a network address prefix of 192.168.0.0/24, then the host (source) will determine the packet to be local. On the other hand, if the network address prefix of the destination packet is 192.168.1.0/24 and the host (source) is in a different network with a network address prefix of 192.168.0.0/24, then the host (source) will determine the packet to be remote.
You can learn more about network addresses at: brainly.com/question/29834857
#SPJ11
according to amdahl's law, what is the speedup gain for an application that is 90% parallel and we run it on a machine with 6 processing cores?
According to Amdahl's law, the speedup gain for an application that is 90% parallel and is run on a machine with 6 processing cores is 15x.
Amdahl's law states that the theoretical maximum speedup of a task on a multi-processor computer is determined by how much of the task is parallelizable.
Amdahl's Law's formula is as follows:
S = 1 / [ (1 - p) + (p / N)]
Where S is the theoretical speedup that can be achieved using N processors;
P is the fraction of the task that is parallelizable,
while(1-p) is the fraction of the task that must be completed serially;
N is the number of processors used by the task.
Given that the application is 90% parallel, the non-parallelizable part is 10%. The serial fraction is thus 1 - 0.9 = 0.1.
We'll assume a machine with 6 processing cores. The formula for Amdahl's Law will now be:
S = 1 / [ (1 - 0.9) + (0.9 / 6)] = 15.0
The speedup gain for an application that is 90% parallel and is run on a machine with 15x.
To learn more about Amdahl's law: https://brainly.com/question/28274448
#SPJ11
the assembler checks the pointer type used with the addr operator against the pointer type declared in the proc directive. for example, it prevents a pointer to dword from being passed to a procedure expecting an pointer to byte. true or false
The given statement, "The assembler checks the pointer type used with the ADDR operator against the pointer type declared in the PROC directive. For example, it prevents a pointer to DWORD from being passed to a procedure expecting an pointer to BYTE," is false (F).
This is because assemblers do not perform type checking on the arguments passed to a procedure, including pointers, as it is the programmer's responsibility to ensure that the correct types are used.
Assemblers are tools used to convert assembly language code into machine code. They do not perform type checking on arguments passed to procedures. It is the programmer's responsibility to ensure that the correct types are used. In other words, it is up to the programmer to correctly use the ADDR operator with the pointer type declared in the PROC directive.
If the programmer uses an incorrect pointer type, the assembler will not detect this and the program may not function as expected. Therefore, it is important for programmers to have a good understanding of the correct data types to use in their programs.
Learn more about ADDR operator https://brainly.com/question/29756465
#SPJ11
which video source is the best fit to train the ai software? footage from the software developer's video banks. video footage from the stadium's own security cameras
Video Footage from the stadium's own security cameras would be the best fit to train the AI software, as it would provide the most accurate and relevant data for the specific environment and conditions of the stadium.
Video footage from the software developer's video banks may not accurately reflect the conditions and variables present in the stadium, and may not provide the necessary data for effective AI training.AI stands for Artificial Intelligence, which refers to the ability of a computer or machine to perform tasks that typically require human intelligence, such as learning, problem-solving, decision-making, and natural language processing. AI involves the development of algorithms and computer programs that can process.
Learn more about AI: https://brainly.com/question/25523571
#SPJ11
you attempt to jump to a systemd target using the systemctl isolate command, but it will not work. you decide to look at the target unit file. what might you see there that is causing this problem?
You have modified the /etc/ssh/ssh config file for an OpenSSH service.
What does systemctl isolate do?Use the systemctl isolate command to modify the target unit while still in use without having to restart. Copied! In addition to stopping all other units instantly, this order begins the multi-user target unit and all dependant units.A sandbox called Isolate was created to enable the secure execution of untrusted executables while providing them with a restricted environment that prevents them from interfering with the host system. It utilises namespaces and control groups, two characteristics unique to the Linux kernel.Administrators can control the state of services and the OS by using the systemctl command, which maintains both system and service configurations. Also, systemctl is helpful for simple performance adjustment and troubleshooting.To learn more about systemctl isolate command, refer to:
https://brainly.com/question/29633383
NFPA 70E, Standard for Electrical Safety in the Workplace, provides guidance, such as determining severity of potential exposure, planning safe work practices, arc-flash labeling, and selecting _____O ocated in damp or wet locationsO exposed to fumes, vapors, liquids, or gasesO coordinated overcurrent protective devices
NFPA 70E, Standard for Electrical Safety in the Workplace, provides guidance, such as determining the severity of potential exposure, planning safe work practices, arc-flash labeling, and selecting coordinated overcurrent protective devices located in damp or wet locations, exposed to fumes, vapors, liquids, or gases.
In Electrical Safety, the use of the NFPA 70E is significant. This standard provides guidance for companies and employees to reduce exposure to dangerous electrical hazards. It sets safety protocols for those who work with or around electrical equipment that has the potential to generate arc flashes or similar electrical events.
Overcurrent protective devices are devices that protect against overcurrent in an electrical circuit. These are typically fuses or circuit breakers, which protect the electrical equipment from electrical overloads. Therefore, in Electrical Safety, coordinating overcurrent protective devices located in damp or wet locations, exposed to fumes, vapors, liquids, or gases is essential for the security of the electrical equipment in the workplace.
To know more about NFPA 70E:https://brainly.com/question/14144270
#SPJ11
marta is skilled at web design and video editing. she knows how to use software such as adobe illustrator and camtasia. where would be a good section for marta to add this to her profile?
Marta should add her skills in web design and video editing to the “Skills and Expertise” section of her profile.
This section is where potential employers or clients will look for relevant technical knowledge or expertise.
Marta should list the software she is skilled in using, such as Adobe Illustrator and Camtasia, as well as any other relevant tools. She should also briefly describe her proficiency level with each tool to make sure her potential employers or clients understand the scope of her skills.
In addition, she could add any relevant certifications or qualifications she has to the same section.
Overall, by adding her skills and expertise to her profile, Marta will make it easier for employers or clients to understand her skill set, giving her the best possible chance of finding a job or project that meets her qualifications.
Learn more about professional networking and personal branding:https://brainly.com/question/30652751
#SPJ11
what is the reason that an isp commonly assigns a dhcp address to a wireless router in a soho environment?
A business manages the IP address distribution for employee workstations using DHCP. Small businesses that are frequently operated out of homes or even tiny offices are referred to as SOHOs.
Why does a wireless router frequently receive a DHCP address from an ISP in a SOHO context for convenience in managing IP addresses?The ISP commonly uses DHCP to assign the IP address between the wireless router and ISP site. In this system, IP addresses are dynamically assigned to clients, making it simple to assign the assigned IP address to another client in the event that a dropped client.
What function does the WAN DHCP IP address serve?It directs the internet to send data to places like a mailing address on a package.
To know more about IP address visit:-
brainly.com/question/16011753
#SPJ1
which of the following is NOT a step to successful collaboration?
Answer: C is correct
Explanation: you should be hearing everyone out, not trying to convince people that you are right.
explain the domain name system. what are some of the common domain name extensions currently available and what types of services do they designate?
The Domain Name System (DNS) is a distributed database that maps domain names to their associated IP addresses. It is the way that computers locate each other on the internet. Common domain name extensions and their designated different types of services, are: .com = commercial business, .org = non-profit organizations, .net = internet services, .gov = government agencies, .edu = educational institutions, .info = informational websites, .uk = United Kingdom
- .us = United States, .co = companies, corporations, or commercial organizations, .io = input/output, typically used for tech or web services
The domain name system (DNS) is a hierarchical and decentralized naming system for computers, services, or any resource connected to the Internet or a private network. It associates different types of information with domain names assigned to each of the participating entities. A domain name identifies the entity that owns the domain name space, which in turn directs internet traffic to the respective website or IP address.
There are various types of domain name extensions, such as Top-level domain (TLD) and Country-code top-level domain (ccTLD) that are currently available. Common domain name extensions and their services:
1. .com: Commercial businesses
2. .org: Nonprofit organizations
3. .edu: Educational institutions
4. .gov: Government agencies
5. .net: Network infrastructure
The domain name system (DNS) is essential for any network communication because the IP address of each device connected to the internet has to be unique, which could be challenging to manage. Hence, the DNS translates domain names into IP addresses so that computers can understand and locate the respective resources on the internet. It acts as the internet's directory, where computers can look up a domain name and find its associated IP address.
You can learn more about IP addresses at: brainly.com/question/16011753
#SPJ11
Both the folder and ___tab are green
Both the folder and file tab are green.
Green is often used as a visual indicator of a file's availability, meaning that it is ready to be opened and viewed. In the context of this sentence, it can be assumed that both the folder and the file tab are available to be opened and viewed.
The file tab is a part of the graphical user interface (GUI) of an operating system. It contains options and information about a file and can also be used to open, edit, or delete the file. The folder, on the other hand, is used to store and organize files. Both of these components are necessary in order to access and manage the files on a computer.
In summary, both the folder and file tab are green, indicating that they are both ready to be opened and viewed. This allows the user to access and manage the files on their computer.
To learn more about folder, click here:
https://brainly.com/question/14472897
#SPJ11
Project planning teams use project life cycle models because various types of projects have differing demands. Which of the following sequences of stages is most appropriate for a life cycle model for construction projects?
Your order:
1.
pre-planning
2.
design
3.
procurement
4.
construction
5.
start up
PDPCS is the most suitable sequence of stages for a life cycle model for construction projects.
What is Project planning?Project planning is a field that deals with the issue of how to accomplish a project within a specific time frame, typically with specified resources and stages. Setting measurable targets is one way to break project planning down into its parts. finding the deliverables. Project management, which deals with the use of schedules like Gantt charts to plan and then report progress within the project context, includes project planning as one of its components. Manual or computerized project planning methods are both available. Four phases initiation, planning, execution, and closure make up the project management life cycle. The path that leads your project from the start to the finish is made up of these phases.To learn more about Project planning, refer to:
https://brainly.com/question/16927451
ervers that allow applications that are not installed on the local machine to be accessed by local users are called .
A remote server is a server that allows applications that are not installed on the local machine to be accessed by local users.
These applications are hosted remotely, either on the internet or in a secure cloud-based environment, and are typically accessed via the internet or a Virtual Private Network (VPN). Remote servers allow users to access and run applications without having to install them locally. Remote servers provide an important advantage in that they enable users to access resources they wouldn't be able to access otherwise.
Remote servers are used to provide a range of services, including web hosting, online backups, and data storage. They can also be used to provide access to enterprise applications, such as customer relationship management systems, enterprise resource planning systems, or enterprise social networks. Additionally, remote servers can be used to provide access to gaming platforms, remote desktop access, and software-as-a-service.
Remote servers provide an efficient and cost-effective way to access applications, as users do not need to install the software locally. They are also more secure than traditional, on-site servers, as all the data is stored and maintained remotely. This helps to reduce the risk of data breaches and other security issues. Furthermore, remote servers are highly scalable and can be easily configured to meet the needs of a growing user base.
In summary, remote servers are used to provide access to applications that are not installed on the local machine. They provide an efficient, cost-effective, and secure way to access applications, and can be easily scaled up to meet the needs of a growing user base.
You can learn more about remote servers at: brainly.com/question/30599414
#SPJ11
Andy is a freelance reporter and is reviewing an article he wrote for a magazine.He wants to quickly crosscheck some facts he stated in his article.Which of the following can help Andy?
A) RhythmOne
B) Wolfram Alpha
C) Ask a Librarian
D) TinEye
Wolfram Alpha and Ask a Librarian can help Andy crosscheck some facts he stated in his article. Options B and C are the correct answers.
Wolfram Alpha is a search engine that specializes in computational knowledge and can provide answers to factual questions on various topics. It can help Andy verify information related to mathematics, science, engineering, finance, and many other fields.
Ask a Librarian is a service offered by many libraries that provides users with access to professional librarians who can help with research and information needs. Librarians can assist with finding reliable sources of information and can help verify facts and other information.
RhythmOne is an advertising network, and TinEye is a reverse image search engine. Neither of these would be particularly helpful for fact-checking an article.
Thus, option B and option C are correct answers.
You can learn more about Wolfram Alpha at
https://brainly.com/question/14866841
#SPJ11
help i dont know answer
Answer:
Selenium - Web browser automation tool
JMeter - Load testing tool
QTP - Functional testing tool
Quality Center - test management tool
Bugzilla - Defect - Tracking tool
Explanation:
1. considering d-type flip-flop, what would be the q (output) value for given data and clock pulses in time?
The q (output) value for given data and clock pulses in time are
Data: 0 Clock: 0 Time: 0 Q: 0
Data: 1 Clock: 0 Time: 1 Q: 0
What is d-type flip-flop?A d-type flip-flop is a type of sequential logic circuit that stores one bit of data. It is a type of bi-stable latch, meaning it has two stable states, 1 and 0. It is composed of two cross-coupled NOR or NAND gates. The data stored in a d-type flip-flop can be changed by applying a clock pulse, which triggers the flip-flop to move from one state to the other.
D-type flip-flops are widely used in digital logic circuits, such as counters, shift registers and data storage units.
Learn more about d-type flip-flop here:
https://brainly.com/question/15569602
#SPJ1