If the diameter in the semicircle is 10.5 what is the perimeter

Answer:94.2

Step-by-step explanation: here is a answer i think

Answer:

C= 94.2

Step-by-step explanation:

To find the circumference you would multiply 15 and 2 and then multiply that answer by pi, or 3.14.

The furnsale7 data set appears to take the form of a panel data structure.

Panel data is a type of longitudinal data that combines observations over multiple time periods for the same individual or group.

This type of data contains multiple observations for the same unit over time and provides valuable insight into changes that occur over time.

Panel data can provide valuable insights into long-term trends and changes in behavior or trends in a population. Panel data can also be used to study economic growth and development, market trends, and consumer behavior.

To know more about data structure click on below link:

https://brainly.com/question/29487957#

#SPJ11

The probability that a randomly selected event of washing dishes will take a person between 12 and 15 minutes is 0.33 or 33%.

Uniform distribution is a probability distribution where all outcomes are equally likely. In this case, the time it takes to wash dishes is uniformly distributed between 8 and 17 minutes. This means that any time between 8 and 17 minutes is equally likely to occur.

To find the probability that a randomly selected event of washing dishes will take a person between 12 and 15 minutes, we need to find the area under the curve of the uniform distribution function between 12 and 15 minutes.

Since the distribution is uniform, the area under the curve between 12 and 15 minutes is simply the width of the interval divided by the total width of the distribution. Mathematically, we can express this as:

P(12 ≤ X ≤ 15) = (15 - 12) / (17 - 8)

P(12 ≤ X ≤ 15) = 3 / 9

P(12 ≤ X ≤ 15) = 0.33 or 33%.

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

Answer:

75°

Step-by-step explanation:

The angle in the given figure is 90°.

x + 15 = 90

x = 90 - 15

x = 75°

The extreme values of the function f(x, y, z) = x^2 + y^2 + z^2, x^2 + y^2 + z^2 + xy = 27 are minimum = 0 and maximum = 18

Given that

f(x, y, z) = x^2 + y^2 + z^2, x^2 + y^2 + z^2 + xy = 27

To find the extreme values of the function f(x, y, z) subject to the given constraint, we can use the method of Lagrange multipliers.

Defining the Lagrangian function L as follows:

L(x, y, z, λ) = f(x, y, z) - λ(g(x, y, z))

where g(x, y, z) is the constraint function and λ is the Lagrange multiplier.

In our case, we have:

f(x, y, z) = x^2 + y^2 + z^2

g(x, y, z) = x^2 + y^2 + z^2 + xy - 27

So, our Lagrangian function becomes:

L(x, y, z, λ) = x^2 + y^2 + z^2 - λ(x^2 + y^2 + z^2 + xy - 27)

To find the extreme values of f(x, y, z) subject to the constraint g(x, y, z) = 0, we need to solve the following system of equations:

∂L/∂x = 0

∂L/∂y = 0

∂L/∂z = 0

∂L/∂λ = 0

g(x, y, z) = 0

Taking the partial derivatives of L with respect to x, y, z, and λ, we get:

∂L/∂x = 2x - λ(2x + y) = 0

∂L/∂y = 2y - λ(2y + x) = 0

∂L/∂z = 2z - λz = 0

∂L/∂λ = x^2 + y^2 + z^2 + xy - 27 = 0

From the third equation, we get:

2z - λz = 0

z(2 - λ) = 0

So, either z = 0 or λ = 2.

If z = 0, then from the first two equations, we get:

2x - λy = 0

2y - λx = 0

Multiplying the first equation by y and the second equation by x, we get:

2xy - λy^2 = 0

2xy - λx^2 = 0

Subtracting the second equation from the first, we get:

λ(x^2 - y^2) = 0

Since λ cannot be zero, we have x^2 = y^2 and x = y

Similarly, if λ = 2, then from the first two equations, we get:

2x - 2y = 0

x = y

Substituting x = y into the constraint equation, we get:

2x^2 + x^2 = 27

x^2 = 9

x = ±3

So, the possible critical points are:

(3, 3, 0)

(-3, -3, 0)

(0, 0, 0)

Recall that

f(x, y, z) = x^2 + y^2 + z^2

So, we have

f(3, 3, 0) = 3^2 + 3^2 + 0^2 = 18

f(-3, -3, 0) = -3^2 + -3^2 + 0^2 = 18

f(0, 0, 0) = 0^2 + 0^2 + 0^2 = 0

Hence, the minimum is 0 and the maximum is 18

Read more about Lagrange multipliers at

https://brainly.com/question/10479355

#SPJ1

There are 6,354,000 choices for the password.

To generate a password, you need to have 4 letters followed by 2 even digits between 0 and 9, inclusive.

If the characters and digits cannot be used more than once,

Solution: We have to find the number of choices of the password with given conditions.

To find the number of choices, let us follow the following steps:

Step 1: Choose the first letter in 26 ways

Step 2: Choose the second letter in 25 ways (excluding the letter that we have already chosen)

Step 3: Choose the third letter in 24 ways (excluding the 2 letters that we have already chosen)

Step 4: Choose the fourth letter in 23 ways (excluding the 3 letters that we have already chosen)

Step 5: Choose the first even digit in 5 ways (from 0, 2, 4, 6, and 8)

Step 6: Choose the second even digit in 4 ways (excluding the even digit that we have already chosen)

Therefore, the total number of choices for the password with the given conditions is given by:

Total number of choices = 26 × 25 × 24 × 23 × 5 × 4= 6,354,000.

For similar question on choices.

https://brainly.com/question/28338909

#SPJ11

When Will ran around the track 12 times, he ran a total distance of 12 x 0.25 = 3 miles. The answer is 3 miles.

The lap is the total distance a runner has to cover to complete one full circuit of the track. Depending on the size of the track, the lap distance can vary.

In the case of Will, he ran a total of 12 laps of a track that was 1/4 of a mile long.

This means that he ran a total distance of 12 x 0.25 = 3 miles.

This is because 1/4 of a mile is equal to 0.25 miles.

The equation used to calculate the total distance run by Will is: Distance = Number of laps x Length of each lap.

This equation can be used to calculate the total distance run by any runner on any track of any length.

For more questions related to track

https://brainly.com/question/27525473

#SPJ1

The surface area of the triangular prism Milo paints red is equal to 186 square centimeters.

The triangular prism have two triangle and three rectangle faces, so we shall calculate for each area of the faces and add them to get the surface area of the triangular prism as follows:

area of triangle = 1/2(base × height)

area of one triangle face = 1/2(6 cm × 4 cm)

area of one triangle face = 12 cm²

area of two triangle faces = 2 × 12 cm² =24 cm²

area of one rectangle face = 10.8 cm × 5 cm

area of one rectangle face = 54 cm²

area of three rectangle faces = 162 cm²

area of the triangular prism = 24 cm² + 162 cm³

area of the triangular prism = 186 cm²

Therefore, the surface area of the triangular prism Milo paints red is equal to 186 square centimeters.

Read more about triangular prism here:https://brainly.com/question/12410386

#SPJ1

Answer:

Diameter is equal to twice the radius. Given, radius is 4 cm. Diameter = 2(4) = 8 cm. Hence, diameter of the circle with radius as 4 cm is 8 cm.

Step-by-step explanation:

please

give brianliest

Answer: Area = 0

Step-by-step explanation:

((2*2)*3.14)-(4*3.14) = 0

The percentage of alcohol in the vat after an hour will be 4.8%.

Explanation:

Given that a vat with 900 gallons of beer contains 4% alcohol (by volume), beer with 6% alcohol is pumped into the vat at a rate of 9 gal/min and the mixture is pumped out at the same rate. We need to find the percentage of alcohol after an hour.

Let's consider V be the volume of the vat and x be the percentage of alcohol in the vat. Now, the total amount of alcohol in the vat will be Vx.

Let A be the volume of alcohol added in the vat per minute by the pump. Now the volume of alcohol in the vat after a minute will be Vx + A and the volume of the mixture will be V+ 9.

Now the volume of alcohol in the mixture will be (Vx + A)×(x%) and the total amount of alcohol in the mixture will be Vx(x%) + 9A×(6%).

So, the volume of alcohol in the mixture after a minute will be (Vx(x%) + 9A×(6%))/(V + 9).

The rate of change of x will be given by (Vx(x%) + 9A×(6%))/(V + 9) - x/(V + 9). On solving this we get the differential equation:

dx/dt = 0.06 - 0.000067x

On solving the differential equation we get:

x = 80 + 8200/(75e^(0.000067t))

At t = 60 minutes, x = 80 + 8200/(75e^(0.000067×60)) = 4.8%.

Therefore, the percentage of alcohol in the vat after an hour will be 4.8%.

To learn more about volume, refer below:

https://brainly.com/question/1578538

#SPJ11

The order quantity should be 4 bottles.

There are 6 bottles of paroxetine 10 mg in stock, and the par level is 4 bottles, while the maximum quantity is 10 bottles. The question is asking how many bottles should be ordered.

This can be found by calculating the difference between the current stock level and the par level and then adding this difference to the current stock level. If the result exceeds the maximum quantity, the order quantity is equal to the difference between the maximum quantity and the current stock level.

Otherwise, the order quantity is equal to the difference between the current stock level and the par level.In this case, the difference between the current stock level and the par level is 6 - 4 = 2 bottles. Adding this difference to the current stock level gives us a total of 6 + 2 = 8 bottles.

Since 8 is less than the maximum quantity of 10, the order quantity is 8 - 4 = 4 bottles. Therefore, 4 bottles should be ordered to maintain the par level of 4 bottles. Therefore, the order quantity should be 4 bottles.

To know more about Quantitative refer here :

https://brainly.com/question/15712531

#SPJ11

There is not enough evidence to suggest that the difference between the two population means is statistically significant at the 5% significance level.

To test the hypothesis that the difference between two population means is zero, the researcher can use a two-sample t-test. The test statistic is calculated as the difference between the sample means divided by the standard error of the difference.

In this case, the sample means are 106.4 and 99.2, and the standard error of the difference is 6.1. Therefore, the test statistic is (106.4 - 99.2) / 6.1 = 1.18.

To decide whether to reject the null hypothesis that the difference between the two population means is zero, the researcher needs to compare the test statistic to the critical value. The critical value needed to reject the null hypothesis at a 5% significance level with 2 degrees of freedom (n1 + n2 - 2 = 2) is 2.09.

Since the test statistic of 1.18 is less than the critical value of 2.09, the researcher fails to reject the null hypothesis.

To learn more about statistics click on,

https://brainly.com/question/14000767

#SPJ4

Surface area

2 triangles: Just do bh instead of 1/2bh, bh = 8 * 3 = 24

2 rectangles: 2bh but we first need to find h. The altitude pictured by dotted line, creates a right triangle where its hypotenuse is h. Since it also has side lengths 3 and 4, h = 5 (by pythag triplets). Then, 2bh = 2 * 12 * 5 = 120

base: bh = 12 * 8 = 96

Adding these areas we have 24 + 120 + 96 = 240

Volume: Bh (big b signifies area of the base)

B = area of the triangle = 1/2bh = 1/2 * 8 * 3 = 12

So Bh = 12 *12 = 144

Hope this helps you understand the process.

The probability that a specific fire engine is not available when needed is 0.04 (since the probability of it being available is 0.96).

The question asks for two probabilities related to the availability of fire engines in a town. The first part asks for the probability that neither engine is available when needed, and the second part asks for the probability that a fire engine is available when needed.

To calculate the probability that neither engine is available when needed, we need to use the multiplication rule for independent events. We know that the probability that one specific engine is not available when needed is 0.04 (1 - 0.96). Since the two engines operate independently, the probability that both are not available when needed is the product of their individual probabilities:

P(neither available) = P(engine 1 not available) * P(engine 2 not available)

P(neither available) = 0.04 * 0.04

P(neither available) = 0.0016

Therefore, the probability that neither fire engine is available when needed is 0.0016.

To calculate the probability that a fire engine is available when needed, we can simply use the given probability of 0.96:

P(available) = 0.96

Therefore, the probability that a fire engine is available when needed is 0.96.

To learn more about Probability here:

brainly.com/question/11234923#

#SPJ11

If the objective function coefficient for variable 1 decreases by 20, the solution will shift in the direction of the decrease in the objective function coefficient. It means that the optimal solution that was obtained previously will no longer remain optimal, and the new optimal solution will be found with the new objective function coefficient.

In linear programming, the objective function determines the maximum or minimum value that can be attained in the solution, subject to the constraints. The constraints in the problem can be either equalities or inequalities, which limit the range of values that the decision variables can take on.

The change in the objective function coefficient will change the direction of the optimal solution, and it may affect the feasibility of the solution. It means that some constraints may no longer be satisfied, or some variables may become infeasible.

In such cases, it will be necessary to revise the constraints or the variables to ensure the feasibility of the solution.

The solution can also be affected if the constraints of the problem change. The new constraints may limit the range of values that the variables can take on, or they may add new variables to the problem. These changes can affect the feasibility of the solution, and it may require the problem to be solved again to obtain the new optimal solution.


To know more about linear programming, refer here:

https://brainly.com/question/30763902#

#SPJ11

Answer:no

Step-by-step explanation:

using the Pythagorean theorem:

a^2+b^2=c^2

42^2+26^2=50^2

1764+676=2500

2440=2500

2440<2500

So the answer is no

Answer:

Since the decoration is in the shape of a triangle, we can use the formula for the area of a triangle to solve for its height. The area of a triangle is given by:

Area = (1/2) x base x height

Let's call the height of the decoration h. We know that the base after firing is 9 inches, so we can plug in the given values and solve for h:

Area = (1/2) x 9 x h

Area = 4.5h

We don't know the exact area of the decoration, but we do know that the decoration maintains its shape after firing. This means that the ratio of the areas before and after firing is the same, and so is the ratio of the heights and bases. Since the height and base are proportional, we can write:

h / 15 = 9 / 10

Simplifying the equation, we get:

h = (9/10) x 15

h = 13.5

Therefore, the height of the finished decoration is 13.5 inches.

The steps to find the depth through which the storm submerges the lowest parts of the Pensacola Beach is given below.

As it has been given in the question, Pensacola beach is located 5-10 feet above sea level.

The ocean water rises upto 5.5 feet during a storm

Hence you need to add up the height of the highest tide on 16 September to 5.5 feet.

If the combined height of the highest tide and the storm tide is greater than 10 feet, then the whole Pensacola beach submerges.

You just subtract the combined height of the storm and the highest tide from the height of the beach.

Read more about storms and tides here:

https://brainly.com/question/15617225

#SPJ1

Portions of Pensacola Beach, a coastal community built on a barrier island, are located at 3 - 10 feet above sea level.

Hurricane Sally, which struck Pensacola on September 16, 2020 and brought a 5.5 foot storm.

Combined with a high tide on September 16,202, by how many feet did that storm surge submerge the lowest parts of Pensacola Beach? (Hint: use the information in question and change the date on the tidal chart to September 16, 2020) Now, compare your answers above, and think about how the type (pattern) and size of the tides differ for these two locations

The statements when converted to unit rates are $1.20 per lap and $37.50 per hour

To compare the pricing options, we can convert each to a unit rate, which is a rate with a denominator of 1.

This allows us to compare the cost of each option per lap or per hour.

i. $30 for 25 laps:

To find the unit rate, we can divide the total cost by the number of laps:

Unit rate = $30 ÷ 25 laps = $1.20 per lap.

ii. $75 for 2 hours:

To find the unit rate, we can divide the total cost by the number of hours:

Unit rate = $75 ÷ 2 hours = $37.50 per hour.

So, the unit rate for option i is $1.20 per lap and the unit rate for option ii is $37.50 per hour.

By comparing the unit rates, we can determine which pricing option is more cost-effective based on the number of laps or hours Alex wants to ride.

Read more about unit rates at

https://brainly.com/question/19493296

#SPJ1

On a control chart, Control limits separates common from assignable causes of variation option C.

Shewhart charts, after Walter A. Shewhart, are another name for control charts. It is a statistical process control tool that aids in tracking process advancements over time. For instance, hospital management decides to utilise a solution technique in order to shorten the time required to admit a patient.

The process flow diagram for how patients are admitted to the hospital is first created. The average amount of time it takes to admit a patient each day is then measured. Lastly, plot the process variables across time on a control chart.

This control chart's goals are to identify any "special" reasons of variation as well as to document any process improvements.

Learn more about Control limits:

https://brainly.com/question/23821364

#SPJ4

The p-value is (0.0297)

To test the hypothesis that jumping does not affect the girls' breath-holding times, we will conduct a paired t-test using the given data. Here's a step-by-step explanation:

Solution:

1. Calculate the difference between relaxed and jumping times for each girl:
(27-20), (49-43), (31-28), (22-21), (23-25), (45-43), (37-35), (29-32)
The differences are: 7, 6, 3, 1, -2, 2, 2, -3

2. Compute the mean and standard deviation of the differences:
Mean = (7+6+3+1-2+2+2-3)/8 = 16/8 = 2
Standard Deviation = sqrt[((7-2)^2+(6-2)^2+(3-2)^2+(1-2)^2+(-2-2)^2+(2-2)^2+(2-2)^2+(-3-2)^2)/7] = sqrt(42/7) = sqrt(6)

3. Calculate the t-statistic:
t = (Mean - Hypothesized Mean) / (Standard Deviation / sqrt(N))
t = (2 - 0) / (sqrt(6) / sqrt(8)) = 2 / (sqrt(6) / 2.828) ≈ 2 / 0.748 ≈ 2.675

4. Determine the p-value using the t-distribution table or calculator for a two-tailed test with 7 degrees of freedom (N-1) at the 5% level:
The p-value is 0.0297 (rounded to four decimal places).

Since the p-value (0.0297) is less than the significance level of 0.05, we reject the null hypothesis that jumping does not affect the girls' breath-holding times, on average.

To know more about Hypothesis:

https://brainly.com/question/31319397

#SPJ11

{x | x ∈ R, x < 5} would have a graph with an open circle on 5 and a ray pointing left on the number line.

In interval notation, the set {x | x R, x < 5} can be written as (-∞, 5). The symbol (-∞) represents negative infinity, which means all numbers less than any finite number.

So, the interval (-∞, 5) includes all real numbers less than 5, but does not include 5 itself.

To graph this set on a number line, we would draw an open circle at the point 5, because 5 is not included in the set. Then, we would draw a ray pointing to the left, because the set includes all numbers less than 5.

The ray extends indefinitely to the left, because there is no greatest number that is less than 5.

Therefore, the graph of the set {x | x R, x < 5} on a number line would have an open circle at 5 and a ray pointing to the left.

What does an open circle on a number line indicate?

An open circle on a number line indicates that the number is not included in the set.

To know more about Open Circle visit

brainly.com/question/30034329

#SPJ1

Answer:

1  4(3-r)  or  12-4r

2.  7( 8-m) or 56-7m

3.   -2

Step-by-step explanation:

1) |4r−12| , if r<3

|4r-12|

Factor out a 4

4|r-3|

|r-3| will be less than 0 since r is less than 3

So we can rewrite it as 3-r to remove the absolute value signs and make it positive

4 (3-r)

12 -4r

2.   |7m–56| , if m<8

Factor out a 7

7| m-8|  

|m-8| will be less than 0 since m is less than 8

So we can rewrite it as  8-m to remove the absolute value signs and make it positive

7( 8-m)

56-8m

3) |z−7|−|z−9| , if z<7

|z-7| will be less than 0 since z is less than 7  and |z-9| will be less than 0 since z is less than 7

So we can rewrite it as  7-z  and 9-z to remove the absolute value signs and make it positive

7-z - (9-z)

Distribute the minus sign

7-z-9+z

-2

This tree diagram shows all possible orders in which Ryan can read the 3 books, including reading the mystery book (M) first, the history book (H) second, and the biography (B) last, as well as reading the biography first, the mystery second, and the history last.

Mystery is an intriguing and often baffling phenomenon or situation. It is something that is not easily explained or understood and often involves a puzzle or secret that needs to be solved. It can be an event, an entity, or a situation that evokes curiosity, suspense, and a desire to uncover the truth. Mystery can be found in everyday life, literature, films, and other forms of entertainment. It is often used to create a sense of anticipation and wonder, and can be a powerful tool in storytelling. Mystery can also be used to explore deeper truths and to connect with our own inner mysteries.

To learn more about mystery
https://brainly.com/question/25734188
#SPJ1

Complete Question is attached below:

Answer:  The area of the smaller circle is [tex]65.6cm^{2}[/tex].

Step-by-step explanation:

A = [tex]\pi r^{2}[/tex], r is the radius.

1. Find out the diameter of the small circle.

[tex]\frac{1}{3}(27)= 9[/tex]

2) Find out the radius, r.

[tex]radius = \frac{diameter}{2} =\frac{9}{2} =4.5[/tex]

3) We plugin r = 4.5 into the formula to solve the area of the smaller circle.

[tex]A=\pi r^{2}=\pi (4.5)^{2} =65.6cm^{2}[/tex]

The equation of g(x) in vertex form include the following: C. g(x) = (x + 3)² - 2.

In this exercise, you are required to determine the vertex form of a quadratic function h(x) that is written in standard form. Mathematically, the vertex form of a quadratic equation is given by this formula:

y = a(x - h)² + k

Where:

Based on the information provided about the graph of this quadratic function, we can reasonably infer and logically deduce that a mathematical expression which quickly reveals the vertex of the quadratic function is given by:

y = a(x - h)² + k

y = (x - (-3))² + (-2)

y = g(x) = (x + 3)² - 2

Read more on vertex here: brainly.com/question/14946018

#SPJ1

nug