If the final pressure in a container is 6. 10 atm and the volume changes from 2. 5 L to 3. 7 L, what is the original pressure?


Your answer:


9. 028 atm



1. 51 atm



0. 66 atm



4. 12 atm

To make a 1.75 M solution of Ba(NO₃)₂ with a volume of 2.50 L, you will need 1141.72 grams of the solute.

Firstly, we need to understand that Molarity (M) is defined as the number of moles of solute per liter of solution. Thus, we can use the formula:

Molarity (M) = (Number of moles of solute) / (Volume of solution in liters)

We have been given the volume of the solution (V) as 2.50 L and the Molarity (M) as 1.75 M. We need to find out the number of moles of solute (n) required to prepare this solution.

Rearranging the above formula, we get:

Number of moles of solute = Molarity × Volume of solution in liters

Substituting the given values, we get:

Number of moles of solute = 1.75 mol/L × 2.50 L = 4.375 mol

The molecular weight of Ba(NO₃)₂ can be calculated by adding the atomic weights of its constituents, which are Ba=137.33 g/mol, N=14.01 g/mol, O=16.00 g/mol. Thus, the molecular weight of Ba(NO₃)₂ comes out to be:

Molecular weight of Ba(NO₃)₂ = (137.33 g/mol) + 2 × (14.01 g/mol + 3 × 16.00 g/mol) = 261.34 g/mol

Now we can use the formula:

Mass of solute (in grams) = Number of moles of solute × Molecular weight of solute

Substituting the values, we get:

Mass of solute (in grams) = 4.375 mol × 261.34 g/mol = 1141.72 g

To know more about Molarity, refer here:
https://brainly.com/question/31545539#
#SPJ11

Electrons are being shared between nitrogen and hydrogen is the correct statement. Hence option D is correct.

A sort of chemical link known as a covalent bond is created when two atoms share electrons. The electrons that both atoms share are held in a stable balance by a force exerted by both atoms in a covalent link.

Although there are some exceptions, covalent bonds, which are the not as strong as the ionic bonds, are typically created between nonmetal atoms. The ionic bonds are quite stronger than they are.

New bonds for ammonia are created as a result of the reaction between two nitrogen molecules and one hydrogen molecule. Heat energy is released to the environment during this process. This reaction is exothermic as a result.

To know about atom

https://brainly.com/question/30895149

#SPJ1

The complete question is

The reaction between Hydrogen and Nitrogen is illustrated in the image. Which

statement about this reaction is correct?

N₂ + 3H₂ → 2NH₂

a) The nucleus of nitrogen is being split to be able to form bonds with hydrogen.

b) The nucleus of nitrogen is being fused with hydrogen to form a new compound.

c) Protons are being transferred between nitrogen and hydrogen.

d) Electrons are being shared between nitrogen and hydrogen.

The mole fraction of xenon in the gas mixture is 0.631.

Mole fraction refers to the ratio of the number of moles of one component of a mixture to the total number of moles in the mixture. It is a useful concept in chemistry and thermodynamics, particularly in the study of gas mixtures.

In this problem, we are given a gas mixture of xenon (Xe) and argon (Ar) with a total pressure of 12.20 atm. We are also given the partial pressure of argon, which is 4.50 atm. To find the mole fraction of xenon, we need to first find the partial pressure of xenon.

To do this, we can use the fact that the total pressure of the gas mixture is equal to the sum of the partial pressures of each component:

Total pressure = Partial pressure of Xe + Partial pressure of Ar

12.20 atm = Partial pressure of Xe + 4.50 atm

Partial pressure of Xe = 7.70 atm

Now that we have the partial pressure of xenon, we can use the mole fraction formula:

Mole fraction of Xe = Number of moles of Xe / Total number of moles

We can rewrite this formula as:

Mole fraction of Xe = Partial pressure of Xe / Total pressure

Using the values we found earlier:

Mole fraction of Xe = 7.70 atm / 12.20 atm

Mole fraction of Xe = 0.631

Therefore, the mole fraction of xenon in the gas mixture is 0.631.

To know more about xenon, visit:

https://brainly.com/question/5516586#

#SPJ11

Answer:

A chemical formula tells us the number of atoms of each element in a compound.

Explanation:

Explanation:

formula shows

Answer: 652.8 g of iron (III) oxide produced.

Explanation:

To calculate the amount of iron (III) oxide produced, we use the enthalpy change of the reaction to determine the amount of energy released and convert it to moles of Fe2O3 produced. Then, we multiply by the molar mass of Fe2O3 to obtain the mass of Fe2O3 produced. Using these calculations, we get 652.8 g of iron (III) oxide produced.

580.84 grams of iron (III) oxide will be produced when 4300 kJ of heat energy is released.

Given:

Enthalpy change (∆H) value: ∆H = -1652 kJ

Amount of heat energy released: 4300 kJ

From the balanced equation:

4Fe + 3O₂ → 2 Fe₂O₃

The molar ratio between Fe₂O₃ and ∆H is 2:1652 kJ.

To find the molar amount of Fe₂O₃ produced, the following calculation:

[tex]4300 \times \frac{2}{1652}[/tex] = 5.20 mol Fe₂O₃

To convert this into grams, it is required to multiply the molar amount by the molar mass of Fe₂O₃:

5.20  × 2  × 55.85 = 580.84 g

Therefore, 580.84 grams of iron (III) oxide will be produced when 4300 kJ of heat energy is released.

Learn more about heat energy, here:

https://brainly.com/question/1495272

#SPJ2

At STP, typically defined as a temperature of 0°C (273.15K) and a pressure of 1 atm, the volume of a gas is equal to 30 L.

When the temperature of the gas is increased, the kinetic energy of the gas particles increases, causing them to move more quickly and expand. This expansion of the gas increases its volume.

Using the ideal gas law, the new volume of the gas can be calculated by multiplying the original volume by the ratio of the new temperature (323.15K) to the original temperature (273.15K) and raising that to the power of 1/273.15.

In this case, the new volume of the gas is 33.53 L. In conclusion, when the temperature of a gas is raised, its volume increases.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The product of the reaction between methyl propanoate and CH3MgBr, followed by H3O+ is an alcohol, specifically, 2-methyl-2-propanol.

Methyl propanoate is an ester compound made up of three carbon atoms and eight hydrogen atoms. It is a colorless liquid with a slightly sweet odor. Methyl propanoate is produced through the reaction of an alcohol and an acid. The acid used is propionic acid and the alcohol is methanol. The reaction is a condensation reaction, meaning two molecules combine to form one larger molecule with a water molecule as a by-product. Methyl propanoate is used as a solvent and a flavoring agent in foods and beverages.

This is derived from the acyl portion of the methyl propanoate, which is a carboxylic acid. The reaction proceeds via a nucleophilic acyl substitution mechanism, where the CH3MgBr acts as a nucleophile, displacing the OH group from the carboxylic acid, forming a carboxylate ion. This is then protonated by the H3O+, forming the desired alcohol product. The product is represented in the following structure:

O

|

CH3-C-OH  =>  CH3-C-O-MgBr  =>  CH3-C-OH + H3O+

To learn more about methyl propanoate

https://brainly.com/question/30173441

#SPJ4

Answer:

0.25g

Explanation:

Dimensional analysis.

Assuming the reaction is taking place at standard temperature and pressure (STP, 1 atm at 298.15K or 25 C), 1 mol of gas occupies 22.4L.

We are given the volume of the gas, with this we are able to find its number of moles.

125mL = 0.125L

[tex]0.125 L * \frac{1 mol}{22.4 L}[/tex]

= 0.0056mol

With the number of moles we can simply multiply by the molecules molar mass.

CO2 = 12.011 g/mol+ 2*15.999 g/mol

CO2 = 44.009g / mol

[tex]44.009 \frac{g CO2}{mol} * 0.0056mol CO2\\\\=0.25 g CO2[/tex]

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is Protonation of the alcohol group by phosphoric acid.

Protonation is the process of adding a proton (hydrogen ion) to a molecule or atom. The process is also known as hydrogenation or hydrideation. It occurs when a molecule or atom gains a proton, which imparts a positive charge on the molecule or atom.

The mechanism for the E1 elimination reaction of 2-methylcyclohexanol with phosphoric acid is as follows:

Step 1: Protonation of the alcohol group by phosphoric acid.

Phosphoric acid (H₃PO₄) donates a proton to the OH group of 2-methylcyclohexanol, forming an oxonium ion (H₃O⁺). Electron flow is shown in the following diagram:

[tex]O-H + H_3PO4 \rightarrow H_3O^+ + PO_4^3-[/tex]

Step 2: Deprotonation by a base.

The oxonium ion (H3O+) is then deprotonated by a base (e.g. a strong base such as NaOH). Electron flow is shown in the following diagram:

[tex]H_3O^+ + B^- \rightarrow H_2O + BH^+[/tex]

Step 3: Rearrangement of the molecule.

The deprotonated molecule rearranges to form a more stable carbocation intermediate. Electron flow is shown in the following diagram:

[tex]BH^+ \rightarrow B^+ + H^-[/tex]

Step 4: Nucleophilic attack by the alcohol group.

The carbocation intermediate is attacked by the OH group of 2-methylcyclohexanol, forming a new carbon-oxygen bond. Electron flow is shown in the following diagram:

[tex]C^+ + OH- \rightarrow C-O + H^+[/tex]

Step 5: Loss of a proton.

The molecule then loses a proton, forming the product of the reaction. Electron flow is shown in the following diagram:

[tex]C-O + H^+ \rightarrow C=O + H_2O[/tex]

To learn more about Protonation

https://brainly.com/question/15215343

#SPJ4

It is the compound that acts to fulfill the function of the said product.

the statement is true.

A chemical compound is  described as a chemical substance composed of many identical molecules containing atoms from more than one chemical A

A product may be made up of one or more compounds that work together to fulfill any desired  function.

The key difference between  a chemical compound and solution is that a compound contains two or more elements that are chemically bound together whereas a solution has few substances that do not chemically bound together as compounds do.

Learn more about chemical compounds at :

https://brainly.com/question/26556885

#SPJ1

The chemical formula for cassiterite is SnO2, which means that there are two moles of oxygen for every one mole of tin in the compound.

Given that there are 3.316 moles of tin in the sample, we can use the mole ratio to determine the number of moles of oxygen:

1 mole Sn : 2 moles O

3.316 moles Sn : x moles O

x = (3.316 moles Sn) x (2 moles O / 1 mole Sn) = 6.632 moles O

Therefore, there are 6.632 moles of oxygen in the sample of cassiterite.

To know more about oxygen refer here

https://brainly.com/question/13905823#

#SPJ11

The volume of the balloon after the addition of the extra gas is 101.8 L.

The volume of the balloon after the addition of the extra gas can be calculated using the combined gas law, which relates the initial and final conditions of pressure, volume, and temperature of a gas. We need to convert the number of moles of argon to its corresponding volume using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

For the initial conditions, we have:

P1V1 = n1RT1

(assume the temperature is constant)

V1 = n1RT1/P1

V1 = (2.51 mol)(0.08206 L atm mol⁻¹ K⁻¹)(273 K)/(1 atm)

V1 = 55.0 L

For the final conditions, we have:

P2V2 = n2RT2

(assume the temperature is constant and the pressure is 1 atm)

V2 = n2RT2/P2

V2 = (2.51 mol + 3.13 mol)(0.08206 L atm mol⁻¹ K⁻¹)(273 K)/(1 atm)

V2 = 101.8 L

As a result, the capacity of the balloon after adding the extra gas is 101.8 L.

To know more about the Balloon, here

https://brainly.com/question/13516488

#SPJ4

A fewer number of particles of gas at T1 are likely to participate in the reaction than the gas at T2.

A gas's molecular energies are distributed in accordance with temperature according to the Maxwell-Boltzmann distribution, and the most likely energy rises with increasing temperature.

The peak of the energy distribution changes to higher energies as a gas's temperature rises, and an increase in the proportion of molecules with higher energies follows. The likelihood of high-energy gas molecule collisions, which may result in chemical reactions or other types of energy transfer.

Learn more about gases:https://brainly.com/question/19695466

#SPJ1

The total number of moles of gas present in the three 3.0 L sealed flasks containing helium, argon, and xenon respectively, if each flask is at a pressure of 878 mmHg, is 0.447 mol.

To calculate the total number of moles of gas present in the three flasks, we can use the ideal gas law:

PV = nRT

First, we need to convert pressure from millimeters of mercury to atmospheres.

1 atm = 760 mmHg

878 mmHg = 1.153 atm

We can calculate number of moles of gas:

For the helium flask:

[tex]n(He) = (1.153 atm) * (3.0 L) / [(0.08206 L.atm/K.mol) * (273.15 K)] \\n(He) = 0.149 mol[/tex]

For the argon flask:

[tex]n(Ar) = (1.153 atm) *(3.0 L) / [(0.08206 L.atm/K.mol) * (273.15 K)] \\n(Ar) = 0.149 mol[/tex]

For the xenon flask:

[tex]n(Xe) = (1.153 atm) * (3.0 L) / [(0.08206 L.atm/K.mol) * (273.15 K)] \\n(Xe) = 0.149 mol[/tex]

Finally, we can add up the number of moles of gas in each flask to find  total number of moles of gas:

[tex]n(total) = n(He) + n(Ar) + n(Xe) \\n(total) = 0.149 mol + 0.149 mol + 0.149 mol \\n(total) = 0.447 mol[/tex]

To know more about helium flask, here

brainly.com/question/10242192

#SPJ4

--The complete Question is, What is the total number of moles of gas present in the three 3.0 L sealed flasks containing helium (He), argon (Ar), and xenon (Xe) respectively if each flask is at a pressure of 878 mmHg?--

The required mass of argon gas to completely fill a 20.4 L container to an atmospheric pressure of 1.09 atm at 25°C is 37.0 g.

The Volume of the container = 20.4 L

Temperature =  25 degrees

Pressure  = 1. 09 atm

To calculate the mass of the Argon gas, we need to use the ideal gas law equation.

PV = nRT

n = PV/RT

Assuming universal gas constant R=  0.0821 L·atm/(mol·K).

Converting temperature degrees to Kelvin scale

T = 25°C + 273.15 = 298.15 K

Substituting the above values, we get:

n = (1.09 atm)*(20.4 L)/(0.0821 L·atm/mol·K)*(298.15 K)

n = 0.926 mol

The molar mass of argon = 39.95 g/mol,

The mass of argon needed to serve the container is:

0.926 mol × 39.95 g/mol = 37.0 g

Therefore,  we can infer that the mass of argon gas required is 37.0 g.

To learn more about the Mass of Argon gas

https://brainly.com/question/4239844

#SPJ4

The molarity of the given solutions are as follows:

Molarity refers to the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

Molarity can be calculated by dividing the number of moles in the substance by its volume.

The mass of four solutions were given in this question. The number of moles in this substances can be calculated as follows:

Learn more about molarity at: https://brainly.com/question/8732513

#SPJ1

The phases of the moon are a result of the relative positions of the sun, the earth, and the moon. Option A is correct.

As the moon orbits around the earth, the amount of sunlight that reflects off its surface changes, causing the different phases. When the moon is between the sun and the earth, we see a new moon. When the earth is between the sun and the moon, we see a full moon. When the moon is at a right angle to the earth and the sun, we see a quarter moon.

The size of the moon has no effect on the phases, as it appears to be the same size regardless of the phase. The number of craters on the moon is also unrelated to the phases. Therefore, Student A's explanation is the most accurate and supported by scientific evidence.  Option A is correct.

To know more about the Science, here

https://brainly.com/question/12919960

#SPJ4

In diluting the standard solutions, it is more important to use the correct volume of the HNO₃ solution for the dilution rather than the correct concentration.

The concentration of a solution is defined as the amount of solute present in a given amount of solvent. Dilution is the process of adding solvent to a solution to decrease its concentration. In order to achieve a desired concentration of the final solution, one must carefully measure the volume of solvent and the volume of the initial solution that is being diluted.

In this case, the initial solution is 0.01 M HNO₃, which means that it contains 0.01 moles of HNO₃ per liter of solution. To dilute this solution to a desired concentration, one must add a certain volume of water to the initial solution. The key factor in this dilution process is the volume of water added. The volume of the initial solution can be adjusted to compensate for any errors in its concentration, but the volume of water added is critical to achieving the desired concentration.

To know more about the Concentration, here

https://brainly.com/question/14559837

#SPJ4

A bullet recoiling after it is fired

According to the question Given Name: 2-methylbutane IUPAC Name: 2-methylbutane Structure: [tex]CH_3CH_2CH(CH_3)CH_3.[/tex]

Structure is the arrangement or organization of parts or elements in a material, system, or entity. It is essential in understanding how something is composed and how it functions. Examples of structures include the skeletal system of the human body, the structure of a computer program, the structure of a book, or the structure of a business. Structures can be physical or abstract, and are usually determined by the purpose of the material, system, or entity. For example, a bridge is a physical structure designed to support the movement of people, goods, and vehicles across a body of water. A book is an example of an abstract structure, with a specific beginning, middle, and end. The structure of a business might include the organizational hierarchy, the roles and responsibilities of each employee, and the different departments. Knowing the structure of something can help people understand how it works and how to interact with it.

To learn more about Structure

https://brainly.com/question/28353159

#SPJ4

The reaction that undergoes a condensation reaction to produce CH₃CH₂OCH₂CH₃ is the reaction is involving 2CH₃CH₂OH  which is Option D.

The reason behind this is that the reaction between these two compounds is an example of a nucleophilic substitution reaction which includes the replacement or taking over of a leaving group (in this case Br) by a nucleophile (in this case OH) . The reaction projects van SN2 reaction mechanism.

SN2 reaction mechanism refers to the  type of reaction mechanism that is very common in organic chemistry. Inside this mechanism, one bond is broken and dismantled and one bond is formed in a concerted way.

The SN2 reaction mechanism includes the nucleophilic substitution reaction of the leaving group (which generally consists of halide groups or other electron-withdrawing groups) with a nucleophile in a given organic compound .

To learn more about SN2 reaction mechanism

https://brainly.com/question/14150949

#SPJ1

The theoretical yield of aluminum fluoride (AlF₃) obtained from 0.45 mol of aluminum (Al) is 0.45 mol.

The balanced chemical equation for the reaction between aluminum (Al) and fluorine (F₂) to form aluminum fluoride (AlF₃) is:

2 Al + 3 F₂ → 2 AlF₃

According to the equation, 2 moles of aluminum react with 3 moles of fluorine to produce 2 moles of aluminum fluoride. Therefore, the stoichiometric ratio of aluminum to aluminum fluoride is 2:2 or 1:1.

Given that 0.45 mol of aluminum is used in the reaction, the theoretical yield of aluminum fluoride can be calculated as follows:

0.45 mol Al × (2 mol AlF₃ ÷ 2 mol Al) = 0.45 mol AlF₃

To learn more about fluoride follow the link:

brainly.com/question/6245051

#SPJ4

In terms of political history, some states in the United States have longer and richer histories than others. The states with the longest political histories are those that were among the original thirteen colonies that declared independence from Great Britain in 1776.

These states have a political history that dates back to the colonial period, during which time they were governed by British colonial authorities. Many of these states played a key role in the American Revolution and the founding of the United States.

For example, Massachusetts was the site of the Boston Tea Party and the birthplace of the American Revolution, while Virginia was home to many of the country's founding fathers, including George Washington and Thomas Jefferson.
Other states with notable political histories include California, Texas, and Illinois.

California played a key role in the Civil Rights Movement and the counterculture movement of the 1960s, while Texas was the site of the famous battle of the Alamo and played a key role in the development of the oil industry. Illinois was home to Abraham Lincoln, one of the most important political figures in United States history.

In conclusion, the states with the longest political histories are those that were among the original thirteen colonies, but other states such as California, Texas, and Illinois have also made significant contributions to the political history of the United States.

To know more about political histories  refer here

https://brainly.com/question/12443795#

#SPJ11

A neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

A neutral atom is an atom that has an equal number of protons and electrons. In the case of this certain element with 15 electrons, its ground state electron configuration would be 1s2 2s2 2p6 3s2 3p3.

This means that the first shell (n=1) has 2 electrons, the second shell (n=2) has 8 electrons, and the third shell (n=3) has 5 electrons.

Based on its position in the periodic table and the number of valence electrons it has, the element with this electron configuration is phosphorus. Phosphorus is a nonmetal element that belongs to group 15, also known as the nitrogen group.

To determine whether the atoms of this element are diamagnetic or paramagnetic, we need to look at its electron configuration. In this case, we can see that all the electrons are paired up in their respective orbitals, meaning there are no unpaired electrons.

This makes the element diamagnetic, which means it does not have a magnetic field of its own and will not be attracted to a magnetic field.

In summary, a neutral atom of the element with 15 electrons is phosphorus with a ground state electron configuration of 1s2 2s2 2p6 3s2 3p3. It is classified as a nonmetal element in group 15. The atoms of this element are diamagnetic, as all electrons are paired up in their orbitals.

To know more about neutral atom, visit:

https://brainly.com/question/29757010#

#SPJ11

Answer:

B. Combustion.

Explanation:

Looking at the given equation, we can see that methane (CH4) reacts with oxygen (O2) and releases water (H2O) and carbon dioxide (CO2). This matches the definition of a combustion reaction. Therefore, the answer is B. Combustion.

We employ molar mass, Avogadro's number, and mole-to-atom ratios to determine the number of formula units and ions present in 16.0g of NaOH.

Let's calculate by using the above implications :

The molar mass of NaOH can be calculated by adding the atomic masses of sodium (Na), oxygen (O), and hydrogen (H):

Na: 22.99 g/mol

O: 16.00 g/mol

H: 1.01 g/mol

[tex]\text{Molar mass of NaOH} = \text{Atomic mass of Na} + \text{Atomic mass of O} + \text{Atomic mass of H} = 22.99 \, \text{g/mol} + 16.00 \, \text{g/mol} + 1.01 \, \text{g/mol} = 40.00 \, \text{g/mol}[/tex]

Next, we can calculate the number of moles of NaOH in 16.0g using the formula:

moles = mass / molar mass

moles of NaOH = 16.0g / 40.00 g/mol = 0.4 mol

Since one mole of NaOH contains one formula unit of NaOH, the number of formula units can be directly taken as the number of moles. Therefore, there are 0.4 formula units of NaOH present in 16.0g of NaOH.

To determine the number of sodium ions (Na⁺) and hydroxide ions (OH⁻) present, we need to consider the formula of NaOH. It consists of one sodium ion (Na⁺) and one hydroxide ion (OH⁻).

Thus, in 16.0g of NaOH, there are:

0.4 moles of Na⁺ ions

0.4 moles of OH⁻ ions

The number of sodium ions (Na⁺) can be calculated using Avogadro's number, which states that one mole of any substance contains 6.022 × 10²³ entities (atoms, ions, or molecules).

Number of Na⁺ ions = moles of Na⁺ ions * Avogadro's number

Number of Na⁺ ions = 0.4 mol * 6.022 × 10²³ entities/mol

Similarly, the number of hydroxide ions (OH⁻) can be calculated in the same way.

Number of OH⁻ ions = moles of OH⁻ ions * Avogadro's number

Number of OH⁻ ions = 0.4 mol * 6.022 × 10²³ entities/mol

Please note that the exact numerical calculation for the number of ions would require the specific value of Avogadro's number to be inserted. However, the general method outlined here can be used to determine the number of ions present in a given mass of NaOH.

To know more about the NaOH refer here :

https://brainly.com/question/29854404#

#SPJ11

2 moles of Zn are produced when 2 moles of hydrogen react in the given reaction: [tex]Zn + 2HCl[/tex]  → [tex]ZnCl_2 + H_2[/tex]

The balanced chemical equation for the reaction between zinc (Zn) and hydrochloric acid (HCl) is:

[tex]Zn + 2HCl[/tex] → [tex]ZnCl_2 + H_2[/tex]

Therefore, if 2 moles of [tex]H_2[/tex] are produced, we can work backward to determine how many moles of Zn must have reacted.

Starting with 2 moles of [tex]H_2[/tex], we know that it must have come from the reaction of 1 mole of Zn, since the mole ratio of Zn to [tex]H_2[/tex] is 1:1. Therefore, for every 1 mole of Zn that reacts, we get 1 mole of [tex]H_2[/tex].

So, if 2 moles  [tex]H_2[/tex] are produced. Thus, the answer is 2 moles of Zn.

To know more about hydrochloric acid, here

brainly.com/question/14006357

#SPJ1

The statement "1/2 of an oxygen atom can combine with 2/3 of a hydrogen atom" is false because Atoms are the basic building blocks of matter and cannot be divided into smaller parts without breaking down the atom's structure.

An oxygen atom is composed of 8 protons, 8 neutrons, and 8 electrons, and it is not possible to divide an oxygen atom into halves. Similarly, a hydrogen atom consists of 1 proton, 1 electron, and 0 or 1 neutron, and it cannot be divided into thirds.

When atoms combine to form molecules, they do so in specific ratios determined by their chemical properties.

In the case of oxygen and hydrogen, the most common combination is two hydrogen atoms and one oxygen atom, which combine to form a water molecule ([tex]H_2O[/tex]). This is because the outer electron shells of the oxygen atom and the hydrogen atoms can interact in a way that stabilizes the resulting molecule.

Therefore the given statement is false

For more such questions on Atoms, click on:

https://brainly.com/question/6258301

#SPJ11

The equilibrium concentration of Ag⁺ in the solution is 0.00200 M.

To solve this problem, we can use the equation for the reaction between silver nitrate (AgNO₃) and sodium iodate (NaIO₃), which is:

AgNO₃ + NaIO₃ -> AgIO₃ + NaNO₃

We know the initial concentrations of the two solutions: 0.00200 M for the AgNO₃ and 0.01 M for the NaIO₃. When they are mixed together, they will react to form a new equilibrium concentration of silver ions (Ag⁺).

To find the equilibrium concentration of Ag⁺, we need to use the stoichiometry of the reaction and the equilibrium constant (K) for the reaction. The balanced equation tells us that one mole of AgNO₃ reacts with one mole of NaIO₃ to form one mole of AgIO₃. Therefore, at equilibrium, the concentration of Ag⁺ will be equal to the initial concentration of AgNO₃ minus the amount that reacted to form AgIO₃:

[Ag⁺] = [AgNO₃] - [AgIO₃]

We can use the equilibrium constant expression for the reaction to find the concentration of AgIO₃:

K = [AgIO₃]/([AgNO₃][NaIO₃])

At equilibrium, this expression will equal the equilibrium constant for the reaction, which is given as 1.8 x 10^-12. We can rearrange this expression to solve for [AgIO₃]:

[AgIO₃] = K[AgNO₃][NaIO₃]

Substituting the initial concentrations and the value of K, we get:

[AgIO₃] = (1.8 x 10^-12)(0.00200 M)(0.01 M) = 3.6 x 10^-17 M

Now we can plug this value into the equation for [Ag⁺] to find the equilibrium concentration of silver ions:

[Ag⁺] = [AgNO₃] - [AgIO₃] = 0.00200 M - 3.6 x 10^-17 M = 0.00200 M (to three significant figures)

Learn more about equilibrium concentration at https://brainly.com/question/10838453

#SPJ11

The blanks are filled by the following;

A balanced reaction equation is a chemical equation that shows the reactants and products of a chemical reaction, and the relative amounts of each involved in the reaction.

In a balanced reaction equation, the number of atoms of each element must be the same on both sides of the equation. This is achieved by adjusting the coefficients (the numbers in front of the chemical formulas) of the reactants and products until the number of atoms of each element is equal on both sides.

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1