When you catch a ball you threw in the skies at the a speed exceeding 14.9 m/s, it will also travel at the same speed when you catch it.
How fast is it?Time is a scalar that indicates the direction and speed of an object's motion. Usually, it is expressed in terms of measures of speed per amount of time, including m / sec (m/s) or miles each hour (mph) (mph). Speed is the size of velocity, a vector number that indicates both the direction and the speed of motion. Pace is a positive number with a unit of distance traveled per second.
When something is launched into air, it is exposed to the downward-moving force of gravity. The item accelerates downward at a velocity of 9.8 m/s2 as a result of this force
The object will slow down so that it rises and accelerate up as it lowers due to this acceleration. However, if there is very little time between the ball's release and the catch, the ball won't have a chance to slow down much. As a result, the pace at which i catch the ball will be quite similar to the pace at which originally threw it.
The ball will therefore continue to move at the same pace that it did when thrown.
To learn more about speed from the given link:
https:/brainly.com/question/13262646
#SPJ4
The impulse that the pelton wheel applies to the water is ___ the change in momentum of the water after hitting the flat paddle wheel?
The impulse that the pelton wheel applies to the water is equal to the change in momentum of the water after hitting the flat paddle wheel.
What is the pelton wheel about?Impulse is a measure of the force applied to an object over a period of time, and it is equal to the change in momentum of the object.
In the case of the pelton wheel, the force is applied to the water by the flat paddle wheel, and the change in momentum of the water is the result of that force.
Therefore, The impulse of the pelton wheel is therefore equal to the change in momentum of the water after it hits the paddle wheel.
Learn more about pelton wheel from
https://brainly.com/question/20038787
#SPJ1
How do you find thermal energy from kinetic and potential energy?
Thermal energy can be found from kinetic and potential energy by calculating the amount of work done on an object. Work is equal to the amount of force multiplied by the distance moved by the object.
The Kinetic energy is equal to the mass of the object multiplied by the square of its velocity. Potential energy is equal to the mass of the object multiplied by the acceleration of gravity multiplied by the height of the object. Thermal energy is equal to the sum of the kinetic and potential energies.
Learn more about Kinetic energy :
https://brainly.com/question/20658056
#SPJ4
Please help! 50 points.
A student conducts an experiment to test how the temperature affects the amount of salt that can dissolve in water. In the experiment, she uses 150 milliliters of water in each trial and stirs for five minutes each time.
What is the dependent variable in this experiment?
the temperature of the water
the amount of water
the amount of salt
the time stirred
Answer:
i think its time stirred, double check. i hope it helped ;)
Explanation:
Two particles P and Q are initially at rest 1.64 m apart, P has a mass of 1.43 kg and Q a mass of 4.29 kg. P and Q attract each other with a constant force of 1.79 x 10-2 N. No external forces act on the system. (a) Describe the motion of the center of mass. (b) At what distance from P’s original position do the particles collide?
(a)The center of mass of the system has no acceleration, and remains at the same position as it was earlier.
(b)The particle P, collide at a distance 1.23m from P's original position.
What is acceleration?Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force.Acceleration in a body is the result of imbalanced forces.The three main categories of accelerated motions are uniform, non-uniform, and average acceleration. When an item moves in a straight path with an increase in speed occurring at regular intervals of time, this motion is referred to as having uniform acceleration.Any modification of motion's speed or direction is referred to as acceleration. When anything is speeding up, slowing down, or not traveling straight ahead, it is said to be accelerating.To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
What is the difference between dynamic and active stretching?
Stretching that is passive, such as static stretching, is contrasted with active stretching, such as dynamic stretching. It entails motion, putting the muscles and joints through their full range of motion.
Are dynamic active stretches the same?Active stretching – what is it? Active stretching is the process of relaxing and stretching opposing muscles without the use of external pressures, as opposed to dynamic stretching or ballistic stretching. Stretching that is active is not passive.
What are a few instances of stretching actively?In general, an active stretch doesn't require the use of an external force. An illustration would be a side-leaning stretch with the arms overhead. It is not necessary to pull, push, hold, brace, or hold the stretch. Active stretching is a common practice in yoga, as you'll discover.
To learn more about stretching visit:
brainly.com/question/1942562
#SPJ4
A photon is ___________________. a type of wave a form of kinetic energy a quantum of light an electrostatic force
The photon is typically described as an electromagnetic (EM) wave, such as the image below. These are the two components of the wave longitudinal and transverse.
What is a photon?A photon is a particle of light which essentially is a packet of electromagnetic radiation. The energy of the photon depends on its frequency (how fast the electric field and magnetic field wiggle, this needs better wording, for 'fast electric field' and 'wiggle'.
What is a photon made of?A photon is a tiny particle that comprises waves of electromagnetic radiation. As shown by Maxwell, photons are just electric fields traveling through space. Photons have no charge, no resting mass, and travel at the speed of light.
To know more about photon visit
https://brainly.com/question/14758126
#SPJ4
The Humber Bridge in England has the world's longest single span, 1410 m. Calculate the change in length of the steel deck of the span when the temperature increases from -5.0 degree C to 18.0 degree C.
Assuming the steel deck has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C, the change in length of the steel deck of the span when the temperature increases from -5.0 degree C to 18.0 degree C is 2.16 m. (1410 m x 12 x 10-6 m/m/°C x 23°C = 2.16 m)
Steel is an alloy made of iron and other elements, and is one of the most widely used materials in the world. Steel structures such as bridges are subject to changes in size and shape due to changes in temperature. When steel is exposed to temperatures higher than 0°C, it expands, and when it is exposed to temperatures lower than 0°C, it contracts.
The coefficient of linear thermal expansion is the rate at which the length of an object changes with temperature. This coefficient can vary depending on the type of steel and other factors. For the Humber Bridge, the steel deck of the span has a coefficient of linear thermal expansion of 12 x 10-6 m/m/°C. Therefore, when the temperature increases from -5.0°C to 18.0°C, the steel deck of the span will expand by 2.16 m.
To know more about linear thermal expansion refer to the link brainly.com/question/28232487
#SPJ4
What is moment arm distance?
The distance between the force's line of action and the center of moments, also known as the moment arm or lever arm, is perpendicular. Force times distance equals moment.
Moment distance: what is it?A force's moment is determined by its magnitude and distance from the rotational axis. The strength of a force is measured by its moment around a point (the perpendicular distance of the line of action of the force from the point).
What exactly are moment and lever arms?The distance from an axis to the line of action of a force is known as the moment arm (or lever arm) of a force system. In other words, the moment arm controls the torque's quality.
To know more about moment arm visit:-
https://brainly.com/question/14212503
#SPJ4
People who r good at physics pls help...
In your own words, describe the difference between velocity and speed and how they relate to distance and displacement.
*IF YOU POST LINKS I WILL REPORT YOU*
Answer:
Speed and velocity both measure an object’s rate of motion. However, speed is a scalar quantity, which means that it can be described with a numerical value. Velocity is a vector quantity, which depends on direction as well as magnitude. Read these definition for more information:
speed - the rate of distance traveled by a moving object over time
velocity - the rate of displacement of a moving object over time
Basically, an object’s speed tells you how fast it’s going. Its velocity tells you how fast it’s going in a certain direction. You use speed measurements in your daily life, but physicists depend on velocity measurements more frequently in their work.
Explanation:
What are the 4 components of latency?
The four factors that makeup latency are processing delay caused by processor speed, node queueing delays caused by node load, and transmission delay caused by the bit rate of transmission.
What constitutes latency?The term "latency" refers to the amount of time that passes between the sender and the recipient of data, or between a particular user action and the resulting answer. A user's internet experience will be significantly impacted by network latency, a serious problem with internet access that can be brought on by a number of factors.
How many different kinds of delay exist?Depending on the application case, there are two forms of latency: one-way transmission and round trip. The transmission of data packets from a source to a destination is referred to as one-way latency.
To know more about latency visit:-
brainly.com/question/29497697
#SPJ4
Daniel and Christopher were on a plane traveling at a velocity of 200 km/hr south for 1,000 km. How long (in hours) was the plane flying at that velocity?
Twice each lunar month, all year long, these tides occur. Whenever the moon, earth, and sun are aligned, the gravitational pull of the sun ___ to that of the moon causing ___ tides.
A. Adds ; neap
B. Adds ; maximum
C. Interferes ; neap
D. Interferes ; minimum
i need the answer now so just the answer and not a long explanation would be great ! thanks !
These tides occur twice each lunar month throughout the entire year. When the earth, moon, and sun are all in alignment, neap tides are produced by the sun's gravitational pull amplifying that of the moon.
When the sun and moon are both on the same side of the Earth, what tides occur twice a month?Instead, the phrase refers to the idea of the tide "springing forth." Regardless of the season, spring tides happen twice each lunar month. Neap tides happen when the sun and moon are at right angles to one another, which also happens twice a month.
What are the names of moon tides?The sun, the form of the ocean, and the moon all have an impact on how much or little the tide rises or falls on Earth. Moon tides are the results of the moon's influence on the Earth's tides. The major subject of this article is moon tides.
To learn more about tides visit:
brainly.com/question/9493666
#SPJ4
Definition: This is the rate of distance traveled per unit of time, without regard to direction.
Example: 55 miles per hour on the highway
A visual representation of speed. It can also be used to denote speed. Without taking into account orientation, this is the rate of distance covered in a given amount of time.
What is speed?The speed and direction of a particle's motion are both considered to be the particle's velocity. The distance travelled as well as the direction it is veering.
While velocity refers to both the speed and direction of an object's motion, speed is only the rate at which an object moves along a path over time. In other words, velocity is a vector, but on the other hand speed is a scalar value.
We know that velocity is a vector quantity since it has both a magnitude and a direction. However, speed just has a magnitude and no direction, therefore it.
To learn more about speed visit:
brainly.com/question/7359669
#SPJ4
a runner runs around a circular track covers a distance of 200m, ending in the spot where she started if the entire trip takes 50 seconds , what is her average velocity?
Answer:
0 ms-1
Explanation:
This is a trick question.
* Don't be confused with average speed with average velocity
Since the runner ends in the same spot as she started,
the total displacement covered by the runner is zero.
Since average velocity = total displacement/total time,
As total displacement is zero ,
average velocity = 0 / 50 ms-1
= 0 ms-1
In the sketch to the right, a long straight wire is in the plane of a rectangular conducting wire loop. The current in the straight wire is up. At some point the current in the straight wire starts to increase in magnitude. This increased current leads to an induced current in the wire loop. In which direction will the induced current in the wire loop be? Explain how you reached this conclusion. How would your answer be different if the wire loop was on the left side of the wire instead of the right side?
The direction of the induced current in the wire loop is anti-clockwise.
The direction of the induced current if the wire loop was on the left side of the wire is clockwise.
Lenz's law and the direction of the induced current are the key concepts needed to address this issue.
To determine the direction of the induced current under various circumstances, use Lenz's law.
The induced emf of the coil is proportional to the negative of the rate of change of magnetic flux, according to Faraday's law.
The following expression represents the typical emf that is generated in the coil during the course of the time period: [tex]$$\varepsilon=-\frac{\Delta \Phi}{\Delta t}$$[/tex]
Here, [tex]$\varepsilon$[/tex] is the average emf that is induced in the coil during the time interval and [tex]$\Delta \Phi / \Delta t$[/tex] is the rate of change of magnetic flux.
A magnetic field is induced in the rectangular loop as a result of the current in the wire. The plane is the intended target of this magnetic field.
As the current in the wire grows, the magnetic flux in the rectangular coil rises.
An emf and current are induced by Faraday's law.
Following is noted from Lenz's law:
The inwards growing flux is opposed by the generated current. Therefore, the induced current must flow counterclockwise in order to meet this.
When the rectangular loop is kept to the left of the wire, the magnetic flux will be directed outward.
If the wire loop was on the left side of the wire, the induced current would flow clockwise.
For more questions on Lenz's law
https://brainly.com/question/15610645
#SPJ4
Together, the car and trailer have a mass of 2000 kg. At what rate will the car and trailer accelerate?
The weight of the automobile and trailer together is 2000 kg. The vehicle will accelerate at a rate of 2.5 m/s2.
What does average acceleration formula entail?Acceleration is measured in meters per second squared (ms2), or m s 2. Formula for Average Acceleration: The final velocity minus the initial velocity, divided by the change in time, is the equation for average acceleration (a). A = v t = v f v I t.
What is the linear momentum formula?The product of an object's mass (m) and velocity (v) is its linear momentum. Higher momentum makes it more difficult to halt an object. P = mv is the equation for linear momentum.
To learn more about acceleration visit:
brainly.com/question/12550364
#SPJ4
A grocery shopper tosses a(n) 9.0 kg bag of rice into a stationary 19.1 kg grocery cart. The bag hits the cart with a horizontal speed of 6.7 m/s toward the front of the cart. What is the final speed of the cart and bag
The speed with which the cart and bag move after the collision is equal to 2.14 m/s.
Given the following data:
Mass of bag = 9.0 kg
Speed of bag = 6.7 m/s
Mass of cart = 19.1 kg
Speed of cart = 0 m/s (since it is initially at rest or stationary).
To calculate the final speed with which the cart and bag move after the collision:
Applying the law of conservation of momentum, the collision between the cart and bag is given by the formula:
Where:
M is the mass.
V is the velocity.
Substituting the given parameters into the formula, we have;
9.0 × 6.7 + 19.1 × 0 = Vf (9+19.1)
60.3 = vf (28.1)
vf = 60.3/28.1
vf = 2.14 m / s
To know more about speed of the cart visit:
https://brainly.com/question/15104105
#SPJ4
A 55 kg skater pushed by a friend accelerates 3 m/s2. How much force did the friend apply?
Answer: 165 N.
Explanation: To find out how much force was applied by the friend, you need to use the following formula:
F = ma where F is force, m is mass, and a is acceleration. Now we can plug in the values given.
F = 55 x 3 = 165
F = 165
The amount of force the friend applied is 165 N.
Hope this helps! :)
When distances were carefully measured from the Earth to globular clusters above and below the Milky Way plane (where our view of them is not obscured by interstellar dust and gas), their distribution was found to be
A) spherically symmetric about a point in the constellation Sagittarius and concentrated in that direction.
B) in a relatively flat disk almost perpendicular to the plane of the Galaxy, with a relatively higher density of clusters toward its center.
C) concentrated in the plane of the Milky Way and clustered around the Sun's position, indicating that the Sun is close to the Galaxy's center.
D) uniformly distributed throughout space, with no concentration in any area of the Milky Way.
Answer:
A) Spherically symmetric about a point in the constellation Sagittarius and concentrated in that direction
Explanation:
The globular clusters are present mainly in the direction of Sagittarius with the center of the system of globular cluster being measured as a spherical cluster cloud such that the center of the Milky Way can be taken as being in the Sagittarius constellation
Based on the age of the light- and dark-colored regions of the Moon and the number of craters observed in these regions, we know that impacts in the inner Solar System:
Based on the age of the light- and dark-colored regions of the Moon and the number of craters observed in these regions, we know that impacts in the inner Solar System rapidly decreased approximately 3 billion years ago.
The light-colored areas of the Moon's surface are roughly 1 billion years older than the dark-colored regions.
The dark patches are basalt-based juvenile plains known as maria. The basalt poured in and inundated the region left by a massive asteroid or comet collision. The bright regions are the highlands, which are raised mountains caused by impacts.
The light-colored material is found in portions of the Moon known as the highlands, which represent the Moon's oldest crust.
The lunar highlands are the earliest lunar features. This is mostly determined by the amount of impact craters found in various locations of the moon.
For more questions on Solar System
https://brainly.com/question/1286910
#SPJ4
A student investigates the effect of a crumple zone on the force exerted during a collision The student has one trolley with a spring at the front and another trolley without a spring
silver foil
spring
silver foil
trolley
The student uses the arrangement in Figure 10.
trolley
silver foil
ramp
trolley
silver foil
rigid wall
too
Figure 10
000 ms
millisecond timer
After a trolley is released, it accelerates down a slope and bounces off a rigid wall
The speed of a trolley can be measured just before a collision with the wall and just after a collision with the wall.
The silver foils are connected to a millisecond timer.
The silver foils make contact with each other during the collision, so the time they are in contact can be read from the millisecond timer.
Explain how the student could investigate the effect of a crumple zone on the average force exerted during the collision.
Your explanation should include:
how to determine the force (you may wish to refer to an equation) how the effect of crumple zones may be shown in the investigation precautions that may be necessary to achieve accurate results.
(6)
The impulse allows to calculate which material is better to reduce the damage in a crash are:
Measure the speeds, time and calculate the force for each deformation, with the relationship.The best deformation zone is the one that gives the least force. Some care must be taken.* The most important is that the system starts from the same point so that the speed before the crash is always the same.
* The second is that the mass of the car plus the training materials is always the same.
* Check the zero and streamline of the equipment before measurements.
The student can use the relationship between impulse and momentum variation.
I = ∫ F dt = Δp
Where I is the momentum, F the force, t the time and Δp the variation of the momentum.
The momentum is defined by the product of the mass of the vehicle and the speed.
p = m v
Where m is the mass and v the velocity.
Since you want the average force, you can take the force out of the integral.
F t = m v_f -m v₀
They indicate that the system can measure the speed just before and after the collision with the wall, it is also capable of measuring the time of the collision, therefore we can calculate the force with the expression.
[tex]F = m \ \frac{v_f - v_o}{t}[/tex]
therefore the student can calculate the force for each type of deformation zone. The best deformation zone is the one that gives the least force.
Several cautions must be taken in the experiment:
* Exit from the same point each time.
* Keep the mass constant for the whole experiment, for this, care must be taken with the different weights of each material.
* Check that the equipment is properly calibrated and reset to zero before starting each measurement.
Learn more about impulse here: brainly.com/question/904448
A person travels by car from one city to another with different constant speeds between pairs of cities. She drives for 35.0 min at 55.0 km/h, 16.0 min at 95.0 km/h, and 40.0 min at 35.0 km/h and spends 55.0 min eating lunch and buying gas. (a) Determine the average speed for the trip.
53.24 km/hr is the journey's average speed.
What is the SI unit for average speed?Average speed is determined by dividing the entire distance covered by the body in a given amount of time, or Average Speed=Total time.
total radius. A scalar quantity, that is. M/s is its unit.
What does Formula 9 for Average Speed mean?The length of the entire path traveled divided by the duration of the motion is the definition of average speed.
Total miles traveled: 31.9 + 25.7 + 23.33 = 80.5 km
Average trip speed would be 80.5/1.512=53.24 km.
Total time required to travel this distance is 0.58 hours, 0.266 hours, and 0.666 hours.
To now more about average speed visit:-
https://brainly.com/question/12322912
#SPJ4
Which of the following is a thermodynamic process in which a system returns to the same conditions under which it started?
A) a cyclic process
B) an adiabatic process
C) an isovolumetric process
D) an isothermal process
A cyclic process is a thermodynamic process where the initial and final states are identical. As a result, both the system's initial and end internal energies are constant. As a result, the system's capacity to absorb heat is determined by the work it performs during a cycle.
What is a Thermodynamic Process?A thermodynamic process is one that modifies the system's thermodynamic state. A transition from an initial to a final state of thermodynamic equilibrium characterizes a change in a system. The actual course of the process is not the main focus in classical thermodynamics and is frequently disregarded.
There are several different types of thermodynamic processes, such as (a) isothermal, in which the system's temperature stays constant; (b) adiabatic, in which no heat is exchanged; (c) isobaric, in which the system's pressure stays constant; and (d) isochoric, in which the system's volume stays constant.
To learn more about Thermodynamic process from given link
https://brainly.com/question/30101601
#SPJ4
Sam is standing close to two speakers that are playing music at a party, but when a single note is held for a long time, it seems very soft to him. Why?
When a single note is kept for a long time, it seems very soft to him. This is because he is standing at a point where the rarefactions of the sound wave from one speaker meet the compressions of the sound wave from the other speaker.
A longitudinal wave propagates by means of compressions and rarefactions. When a vibrating object motions forward, it shoves and compresses the air in a veneer of it building a region of high pressure. When a sound wave travels through a medium, say air, the particles of the medium disturb in the same fashion, i.e. compression and rarefaction. Compression is illustrated for the longitudinal waves in which the particles come nearer such that it is at high pressure.
Rarefaction is specified for the longitudinal waves in which the particles move apart such that it has low pressure.
To learn more about sound waves visit here:
https://brainly.com/question/854858
#SPJ4
If the separation is decreased to 1.90 mm , what is the energy now stored if the capacitor was disconnected from the potential source before the separation of the plates was changed
When the distance between the plates is decreased to 1.90 mm, the capacitance of the capacitor will increase and the energy stored in the capacitor will also increase.
However, since the voltage across the plates is not given, it is not possible to calculate the energy stored in the capacitor after the separation of the plates has been changed
The below equation gives the capacitance of a parallel-plate capacitor.
C = ε * A / d
Where ε is the dielectric constant of the material between the plates, A is the area of the plates and d is the distance between the plates.
The energy stored in a capacitor is given by the equation:
Energy = 1/2 * C * V^2
where V is the voltage across the plates and C is the capacitance
To know more about a parallel-plate capacitor refer to:
brainly.com/question/14746425
#SPJ4
What is a pivot arm lever?
The forearm serves as the lever arm, while the elbow serves as the pivot. In spite of the forearm's weight and whatever additional weight the hand may be bearing, the biceps muscle exerts the force and bends the forearm. Compared to the effort, the weight is further from the pivot.
A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.
A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.
For such more question on Pivoted.
https://brainly.com/question/21497963
#SPJ4
How much work is done by gravity to cause a 12.0 kg stone to drop from a height of 22.0 m to a height of 3.00 m?
Answer:
Work done is 2280 Joules.
Explanation:
Work done can be found using the formula
[tex]W=Fs\\[/tex]
where:
W is work done ( in Joules)
F is force ( in Newtons)
s is displacement ( in Meters)
Assuming we are on Earth, we can find the force acting on the object using the mass with the following:
Mass × 10 = Force
12.0 × 10 = 120N
Moreover, we can find displacement by simply subtracting the final distance from the starting distance:
22.0m - 3.00m = 19.0m
Therefore,
[tex]W = Fs[/tex]
[tex]W = 120N[/tex] × [tex]19m[/tex]
[tex]W= 2280J[/tex]
There is a bell on top of a tower that is 45 meters high. The bell has a mass of 20 kg. Calculate its potential energy.
Answer:
9000 Joules
Explanation:
Potential energy = mass x acceleration due to gravity x height
mass = 20kg
acceleration due to gravity = 10m/s2
height = 45 meters
20 x 10 x 45 = 9000 Joules
L 9.4.3 Test (CST): Bond. Molecular Bond,
Question 10 of 25
Carbon dioxide with its two double bonds is an example of a polar molecule.
A. True
B. False
Answer:
False
Explanation:
Carbon dioxide is made up of polar molecules, but the dipole moments cancel each other out. Therefore, not a polar molecule.
"Carbon dioxide with its two double bonds is an example of a polar molecule" is False. The correct option is B.
Carbon dioxide (CO2) is a linear molecule with two polar C=O bonds that are oriented in opposite directions, making the molecule nonpolar overall. The polar bonds cancel out each other's dipole moment, resulting in a molecule with a zero dipole moment.
The dipole moment is a measure of the polarity of a molecule. It is the product of the charge on each end of a polar molecule and the distance between those charges. The dipole moment of a molecule indicates the strength and direction of the electric field generated by the molecule. In a polar molecule, the charges are distributed unevenly, leading to a positive charge at one end and a negative charge at the other end. This separation of charges results in the dipole moment. Dipole moments are expressed in units of Debye (D), where 1 Debye equals approximately 3.336 x 10⁻³⁰ Coulomb meters (C*m).
To learn about nuclear fusion click:
brainly.com/question/12701636
#SPJ7
In some situations, matter demonstrates wave behavior rather than particle
behavior. This is best illustrated by which phenomenon?
A. Photoelectric effect
B. Emission spectra of atoms
О
C. Blackbody radiation
D. Interference patterns of electrons
Answer:
D. Interference patterns of electrons
Explanation: