To solve the problem and assign the values to the `myGas` object's volume and temperature using a pointer, you can modify the code as follows:
```cpp
#include <iostream>
using namespace std;
class Gas {
public:
Gas();
void Print();
int volume;
int temperature;
};
Gas::Gas() {
volume = 0;
temperature = 0;
}
void Gas::Print() {
cout << "Gas's volume: " << volume << endl;
cout << "Gas's temperature: " << temperature << endl;
}
int main() {
int volumeValue;
int temperatureValue;
cin >> volumeValue;
cin >> temperatureValue;
Gas* myGas = new Gas(); // Declare and assign a pointer to a new Gas object
// Set myGas's volume and temperature to volumeValue and temperatureValue, respectively
myGas->volume = volumeValue;
myGas->temperature = temperatureValue;
myGas->Print();
delete myGas; // Delete the dynamically allocated object to free memory
return 0;
}
```
In the code above, the `myGas` pointer is declared and assigned to a new instance of the `Gas` object using the `new` keyword. Then, the `volume` and `temperature` members of `myGas` are assigned the values of `volumeValue` and `temperatureValue` respectively. Finally, the `Print()` function is called on `myGas` to display the values of `volume` and `temperature`.
Note that after using `new` to allocate memory for the `Gas` object, you should use `delete` to free the allocated memory when you're done with it.
To know more about code, click here:
https://brainly.com/question/15301012
#SPJ11
Processing database transactions at SERIALIZABLE isolation level A database programmer implemented the following stored function SKILLS. CREATE OR REPLACE FUNCTION SKILLS ( applicant_number NUMBER ) RETURN NUMBER IS tots NUMBER (7) ; totc NUMBER (8); BEGIN SELECT SUM (slevel) INTO tots FROM SPOSSESSED WHERE anumber = applicant_number; SELECT COUNT (anumber) INTO totc FROM SPOSSESSED WHERE anumber applicant_number; = IF (totc = 0) THEN RETURN 0; ELSE RETURN tots/totc; END IF; END SKILLS; It is possible, that in certain circumstances the processing of the function may return an incorrect result when it is concurrently processed concurrently with another transaction and it is processed at an isolation level READ COMMITTED. Your task is (1) to explain why the function may return an incorrect result when it is processed at an isolation level READ COMMITTED, (2) to provide an example of a case when the function may return an incorrect result. When visualizing the concurrent executions use a technique of two-dimensional diagrams presented to you during the lecture classes, for example, see a presentation 14 Transaction Processing in Oracle DBMS slide 16. When visualizing the concurrent executions use a technique of two-dimensional diagrams presented to you during the lecture classes, for example, see a presentation 14 Transaction Processing in Oracle DBMS slide 16. Deliverables A file solution4.pdf with the explanations why the function may return an incorrect result when it is processed at READ COMMITTED isolation level and an example of a concurrent processing of the function when the returned result may be incorrect.
I can explain why the function may return an incorrect result when processed at the READ COMMITTED isolation level and provide an example using text-based explanations and diagrams.
At the READ COMMITTED isolation level, each transaction reads only the committed data and does not allow dirty reads. However, it allows non-repeatable reads and phantom reads. In the given stored function, two SELECT statements are executed sequentially. If another transaction modifies the data between these two SELECT statements, it can lead to inconsistent results.
Example:
Let's consider two concurrent transactions: Transaction A and Transaction B.
Transaction A:
BEGIN
SELECT SUM(slevel) INTO tots FROM SPOSSESSED WHERE anumber = 1;
-- Assume tots = 50
SELECT COUNT(anumber) INTO totc FROM SPOSSESSED WHERE anumber = 1;
-- Assume totc = 5
-- Return tots/totc = 10
END
Transaction B:
BEGIN
-- Another transaction modifies the data
DELETE FROM SPOSSESSED WHERE anumber = 1;
-- Commit the transaction
COMMIT
END
In this scenario, Transaction A starts first and calculates tots = 50 and totc = 5. However, before it can return the result, Transaction B executes and deletes all rows with anumber = 1 from the SPOSSESSED table. After Transaction B commits, Transaction A resumes and tries to fetch tots and totc values, but now there are no rows matching the WHERE condition. Consequently, the function will return NULL or an incorrect result.
It's important to note that the example above assumes that the transactions are executed concurrently and that the READ COMMITTED isolation level allows non-repeatable reads or phantom reads. The specific behavior may vary depending on the database management system and its transaction isolation implementation.
To create the visual representation of the concurrent executions and provide a detailed diagram, I recommend referring to the presentation slides or using a diagramming tool to illustrate the sequence of actions and their outcomes in a graphical format.
Learn more about isolation level here:
https://brainly.com/question/32365236
#SPJ11
Consider the following decision problem: given a set S of integers, determine whether there exists a prime number that divides at least two integers from S. Is this problem in P? Yes, no, unknown? Justify your answer (if your answer is "yes", give a polynomial-time algorithm).
The decision problem of determining whether there exists a prime number that divides at least two integers from a given set S falls into the category of integer factorization.
It is a well-known problem that integer factorization is not known to be solvable in polynomial time. Therefore, the problem of finding a prime number that divides at least two integers from a set S is not known to be in P.
Integer factorization is a problem of great importance in cryptography and number theory. Despite significant progress, no polynomial-time algorithm has been discovered to solve integer factorization efficiently. The problem of determining whether there exists a prime number that divides at least two integers from a given set S is closely related to integer factorization, as it requires finding prime factors of the integers in the set.
Currently, the best-known algorithms for integer factorization have exponential or sub-exponential time complexity. These algorithms, such as the General Number Field Sieve (GNFS) and the Elliptic Curve Method (ECM), have not been proven to run in polynomial time.
As a result, it is not known whether the problem of finding a prime number that divides at least two integers from a set S is solvable in polynomial time. The problem remains open, and it is classified as an unsolved problem in computational complexity theory.
To learn more about integers click here:
brainly.com/question/13258178
#SPJ11
2. Counting Blobs Consider the same grid specification from the problem above. This time, the goal of your program is to count the total number of blobs. Input The input for this program is provided as command line arguments, as shown below: File name for the grid of calls 19 N> Number of rows in the grid <> Number of columns in the grid CONN> Connection type. Can be either 4 The rows are numbered 1 through from top to bottom, and the columns are numbered 1 through w from left to right. 2 c M, N - 188 The line below shows an example of using your program: $ ./blobs grid.txt 8 84 Note: again we stress that the input section is documentation for the code handout and the input processing has been done for you. Your Task Again inside of cellgrld you have been given the header for a member function called count Blobs. The goal of this function is to count the number of blobs in your grid. Implement a backtracking solution for this problem. Output Your program should write to the standard output, the count of blobs in the grid. For example, considering the input file below: Your program should print the blob count to standard output Here are some sample arguments along with the expected output from your program: $ ./blobs grid.txt 8 8 4 4 $ ./blobs grid.txt 8 8 8 2 To submit your solution to Gradescope, simply select the files you wish to submit and use the "drag and drop" option. For problems 1 & 2 you should submit your cellgrid.cpp and cellgrid.h files. For question 3 submit sudoku.cpp and sudoku.h. Finally for question 4, submit your main.cpp file named imageBin.cpp. For each of the questions you either pass the test cases (full points) or not (zero points).
Based on the code above, it shows that one is required to implement a backtracking solution to count the number of blobs in a grid.
What is the program?Backtracking could be a strategy utilized to fathom combinatorial issues by efficiently investigating all conceivable arrangements. It includes attempting out distinctive choices and fixing or backtracking when a choice leads to a dead conclusion.
By investigating distinctive ways and making choices along the way, the calculation can find a arrangement or decide that there's no arrangement. Within the setting of checking blobs in a lattice, a blob alludes to a associated gather of cells.
Learn more about program from
https://brainly.com/question/26134656
#SPJ4
No: 01 202123nt505 sa subjective question, hence you have to write your answer in the Text-Field given below. 76610 The popular amusement ride known as the corkscrew has a helical shape. The parametric equations for a circular helix are 2022/05/ x = a cos t ya sin t z = bt where a is the radius of the helical path and b is a constant that determines the "tightness" of the path. In addition, if b>0, the helix has the shape of a right-handed screw; if b < 0, the helix is left-handed. Obtain the three-dimensional plot of the helix (write program or only commands) for the following three cases and compare their appearance with one another. Use 0 <= t <=10 pi and a=1 a. b- 0.1 b. b= 0.2 c. b= -0.1 O
Python is a high-level, interpreted programming language known for its simplicity and readability.
To obtain the three-dimensional plot of the helix for the given cases, we can use Python and the Matplotlib library. Here's an example code that generates the plots:
python
import numpy as np
import matplotlib.pyplot as plt
# Parameters
a = 1
t = np.linspace(0, 10 * np.pi, 500) # Values for t
# Case 1: b = 0.1
b1 = 0.1
x1 = a * np.cos(t)
y1 = a * np.sin(t)
z1 = b1 * t
# Case 2: b = 0.2
b2 = 0.2
x2 = a * np.cos(t)
y2 = a * np.sin(t)
z2 = b2 * t
# Case 3: b = -0.1
b3 = -0.1
x3 = a * np.cos(t)
y3 = a * np.sin(t)
z3 = b3 * t
# Plotting
fig = plt.figure()
ax = fig.add_subplot(111, projection='3d')
# Plot for Case 1
ax.plot(x1, y1, z1, label='b = 0.1')
# Plot for Case 2
ax.plot(x2, y2, z2, label='b = 0.2')
# Plot for Case 3
ax.plot(x3, y3, z3, label='b = -0.1')
# Set labels and title
ax.set_xlabel('X-axis')
ax.set_ylabel('Y-axis')
ax.set_zlabel('Z-axis')
ax.set_title('Helix Plot')
# Add legend
ax.legend()
# Show the plot
plt.show()
Running this code will generate a 3D plot showing the helix for each case: b = 0.1, b = 0.2, and b = -0.1. The plots will be displayed in a window, and you can compare their appearances with one another.
Note: To run this code, you will need to have the NumPy and Matplotlib libraries installed in your Python environment.
To learn more about code visit;
https://brainly.com/question/15301012
#SPJ11
You want to create a pin number for ATM. If the length of pin number should be 4 or 5, and you choose each digit out of only odd digits, i.e {1, 3, 5, 7, 9), how many different pin numbers of length 4 or 5 are possible?
The total number of pin numbers of length 5 is 5^5 = 3125. To calculate the number of different pin numbers possible with the given conditions.
We need to consider two cases: pin numbers of length 4 and pin numbers of length 5. Case 1: Pin numbers of length 4. Since each digit can be chosen from the set {1, 3, 5, 7, 9}, there are 5 choices for each digit. Therefore, the total number of pin numbers of length 4 is given by 5^4 = 625. Case 2: Pin numbers of length 5. Similar to the previous case, each digit can be chosen from the set {1, 3, 5, 7, 9}. Hence, there are 5 choices for each digit.
Thus, the total number of pin numbers of length 5 is 5^5 = 3125. Combining both cases, we have a total of 625 + 3125 = 3750 different pin numbers possible with the given conditions.
To learn more about pin numbers click here: brainly.com/question/31496517
#SPJ11
How to implement this html/css/js code so that when another question is selected, the other one will slide up and be hidden?
Tips and Frequently Asked Questions
To achieve this sliding effect, you can use jQuery's slideUp() and slideDown() methods.
First, give each question a unique ID so that we can distinguish between them. For example:
html
<div id="question1">
<h2>How to choose a bouquet?</h2>
<p>Add fragrance. Use a scented flower in your bouquet.</p>
<!-- more text here -->
</div>
<div id="question2">
<h2>How to care for your bouquet?</h2>
<p>Keep the vase clean and filled with fresh water.</p>
<!-- more text here -->
</div>
Then, add a click event listener to each question that will slide up any open questions and slide down the clicked question. You can do this using jQuery's click() method and slideUp() and slideDown() methods.
javascript
$(document).ready(function() {
// hide all answers on page load
$(".faq-answer").hide();
// add click event listener to each question
$(".faq-question").click(function() {
// if clicked question is not already open
if (!$(this).hasClass("open")) {
// slide up any open questions and remove "open" class
$(".faq-question.open").next().slideUp();
$(".faq-question.open").removeClass("open");
// slide down clicked question's answer and add "open" class
$(this).next().slideDown();
$(this).addClass("open");
}
// if clicked question is already open
else {
// slide up clicked question's answer and remove "open" class
$(this).next().slideUp();
$(this).removeClass("open");
}
});
});
Note that this code assumes that each question has a corresponding answer with a class of faq-answer. You can adjust the class names and selectors to match your specific HTML structure.
Learn more about sliding effect here:
https://brainly.com/question/9702534
#SPJ11
Given the following file (you'll need to type this into a text file in Ropi) I
12345, Jones, Michael,45
46432,Smith, Mary,21 98034,Lee, YISoon,34
48223,Thompson, Zaire,39 29485,Mendez, Jorge,61
Employes Class:
Note, the file will be in the following order:
Employee ID, Lost Name, First Name, Age
Make Instance variables for the following:
Employee ID (Integer), Last Name (String), First Name (String), age (Integer)
Create assessor methods for each instance variable:
String getFirstName(), String getLastName(), int getEmpID(), Int age0
Create mutator methods for each Instance variable:
vold setFirstName(String first), void setLastName(String last), vold setEmpID (int id), void setAge(int age)
Create a toString() method that will print out each record like this:
Employee firstName YiSoon
Employee lastName Lee Employee ID 98034
Employee Age 34
Implement the Comparable Interface and create the Comparable method:
public int compareTo(Employee other)
In this method, compare the last names.
If the last name of the calling object is the same as the other object return 0
If the last name of the calling object is less than the other object return -1
If the last name of the calling object is greater than the other object return 1
Here's an implementation of the Employee class with the requested instance variables, accessor methods, mutator methods, toString() method, and compareTo() method:
public class Employee implements Comparable<Employee> {
private int empID;
private String lastName;
private String firstName;
private int age;
// Constructor
public Employee(int empID, String lastName, String firstName, int age) {
this.empID = empID;
this.lastName = lastName;
this.firstName = firstName;
this.age = age;
}
// Accessor methods
public String getFirstName() {
return firstName;
}
public String getLastName() {
return lastName;
}
public int getEmpID() {
return empID;
}
public int getAge() {
return age;
}
// Mutator methods
public void setFirstName(String first) {
firstName = first;
}
public void setLastName(String last) {
lastName = last;
}
public void setEmpID(int id) {
empID = id;
}
public void setAge(int age) {
this.age = age;
}
// toString() method
public String toString() {
return "Employee firstName " + firstName + "\n" +
"Employee lastName " + lastName + "\n" +
"Employee ID " + empID + "\n" +
"Employee Age " + age + "\n";
}
// compareTo() method
public int compareTo(Employee other) {
return this.lastName.compareTo(other.getLastName());
}
}
Learn more about class here:
https://brainly.com/question/27462289
#SPJ11
Dear students, Include the following header comments at the beginning of java tutorials, assignments and practical quiz. ******* ***************** ********* // ******************************* // Course Name and #: ITCS 114 // Activity Name: XXXXXXXX // Name: XXXXXXXXXXXXXXXX Section #: XX Date: XX/XX/XXXX Activity #: XX Student ID:XXXXXXXX // **** ********** Write a recursive method that takes an integer n as a parameter (where n>1). The method should compute and return the product of the n to power 3 of all integers less or equal to n. Then, write the main method to test the recursive method. For example: Ifn=4, the method calculates and returns the value of: 13 * 23 * 33 * 44= 13824 If n=2, the method calculates and returns the value of: 13 * 23 = 8 事 = Sample I/O: Enter Number (n): 4 The result = 13824 Enter Number (n): 2 The result = 8
In this programming task, we were tasked to write a recursive method that calculates the product of n to power 3 of all integers less than and equal to n. We were then asked to write a main method to test the recursive method.
To accomplish this, we first wrote the necessary header comments at the top of our code to provide important information about the program, such as the course name and number, activity name, student name, section number, date, and student ID.
We then proceeded to write the main method, which prompts the user for an integer value of n, calls the recursive method to calculate the product of n to power 3 of all integers less than and equal to n, and prints out the result.
The recursive method is implemented using a base case where, if n is equal to 1, the method returns 1. Otherwise, it recursively multiplies n to power 3 with the return value of the same method called with n-1 as parameter.
Overall, this programming task helped us understand how to implement recursion in Java and apply it to solve a specific problem. It also reinforced the importance of proper coding practices, such as adding header comments and correctly formatting code for readability.
Learn more about recursive method here:
https://brainly.com/question/29220518
#SPJ11
Take the polymorphic type for example:
(c, h) -> (c -> h) -> (h, h)
Make a list of all conceivable total functions of this type as lambda expressions, omitting any that behave similarly to the ones you've already put down.
The given polymorphic type (c, h) -> (c -> h) -> (h, h) represents a function that takes two arguments, a function from c to h, and returns a tuple of type (h, h). Multiple conceivable total functions can be defined as lambda expressions for this type.
The given polymorphic type (c, h) -> (c -> h) -> (h, h) represents a function that takes two arguments: a value of type c, and a function from c to h. It returns a tuple of type (h, h). To create a list of conceivable total functions of this type using lambda expressions, we can consider different combinations of operations on the input arguments to produce the desired output.
For example, one possible lambda expression could be: λc h f. (f c,f c)
Here, the lambda expression takes a value c, a value h, and a function f, and applies the function f to the input c to produce two h values. It returns a tuple containing these two h values.
Similarly, other conceivable total functions can be created by varying the operations performed on the input arguments. The list can include multiple lambda expressions, each representing a distinct total function for the given polymorphic type.
LEARN MORE ABOUT polymorphic here: brainly.com/question/29850207
#SPJ11
please use C++ language
Input Data Conversion
This will be a separate file from the previous section
• Start with the steps down to creating a main function
• In the main function, create a variable that will hold an int
int userValue;
• Prompt the user to enter a number
• Read the users input into the int variable created above
cin >> userValue;
• Print out the value that the user entered with a newline after
cout << userValue << endl; // May also use cout << userValue << "\n";
Compile and run the program. Test it with the following input. Note what you thought would be the output and what the actual output was:
• Any integer smaller than MAX_INT and greater than MIN_INT
• Any floating point number
Did the output match what you thought? Why do you think that the program output the values it did?
Make the following changes to your program:
• Add a string variable to the main function
• After reading in the int, read into the string variable just created (do not prompt for input)
• Write out the string that was read in
Compile your code, and run the program. Use a floating point number for the value entered when prompted to enter a number. Note the number entered and what the output result was. Does this change what you thought was happening previously?
Putting it together: Infinite data entry
This will be a separate file from the previous sections. Prompt the user to enter a positive number, or a negative number to exit. Keep track of the largest number seen, the total value of all the numbers entered, and the count of the numbers entered. For each number entered, compare it to the current largest number, and if larger, replace the current largest number. Add the number to the total, and increment the count. When the user enters a negative number, output the current largest number and then exit/return. Negative numbers are never added to the total or result in the count being incremented.
Putting it together: Binary conversion
This will be a separate file from the previous sections. For this program you will prompt the user to enter a number, then perform the algorithm below to convert the number to binary, storing each bit as a character in a string. Then output the number that the user entered, and it’s binary conversion.
Algorithm
This algorithm gets the bit positions from right to left (i.e. the least significant bit to the most significant bit).
• Mod the number by 2 (note the result will either be 1 or 0) and store the result as a string in the appropriate position
• Divide the number by 2
• Repeat until the number is 0
In this task, we are working with C++ language and performing various operations.
In the first section, we create a program that prompts the user to enter a number, reads the input, and prints out the entered value. We test it with different inputs, including integers and floating-point numbers, and observe the program's output. The actual output matches our expectations because the program correctly reads and prints the user's input.
Next, we make changes to the program by adding a string variable. After reading the integer input, we also read into the string variable without prompting for input. Then we write out the string that was read in. We compile and run the program, using a floating-point number as the input value. We note the input value and the output result. This change does not affect the previous behavior of reading and printing the integer value. The program still operates correctly and outputs the string without any issues.
In the final sections, we work on two separate programs. In one program, we prompt the user to enter positive numbers or a negative number to exit. We keep track of the largest number seen, the total value of all entered numbers, and the count of entered numbers. We compare each number to the current largest number, update it if necessary, and update the total and count accordingly. When the user enters a negative number, we output the current largest number and exit the program.
In the other program, we prompt the user to enter a number and then convert it to binary using the provided algorithm. We store each bit as a character in a string and output both the original number and its binary conversion.
Overall, these tasks involve input handling, variable manipulation, and conditional logic in C++. We test different scenarios and ensure the programs perform as expected.
For more information on Input Data Conversion visit: brainly.com/question/31475772
#SPJ11
To increase access to a file a soft link or shortcut can be created for the file. What would happened to the soft link if the original file is deleted? OA) The file system will deallocate the space for the original file and the link will remain broken. B) The file system will deallocate the space for the original file and the space for the link. Both files will bedeleted. Oc) The file system will keep the original file until the link is deleted. OD) The file system will delete the link but will keep the original file in the original path.
The correct option among the following statements is (A). If the original file is deleted, the soft link or shortcut will become broken.
The file system will deallocate the space for the original file and the link will remain broken. A soft link or symbolic link is a file that points to another file or directory, which might be on another file system or disk partition. In other words, it is simply a pointer to another file. A soft link or shortcut makes it easier to access files that are located in distant directories. The shortcut is used to access the actual file quickly. If the original file is deleted, the soft link or shortcut will become broken. Even if the link is still there, it will no longer link to the original file because it has been deleted.
Know more about soft link, here:
https://brainly.com/question/31454306
#SPJ11
How many ways to partition 2n into 2 class of size n ?
subject : 465 Design Automation of Digital Systems
There are 70 ways to partition 8 elements into 2 classes of size 4.
The number of ways to partition 2n elements into 2 classes of size n can be calculated using the concept of binomial coefficients.
To partition 2n elements into 2 classes, we need to select n elements from the total 2n elements to be in one class, and the remaining n elements will automatically be in the other class.
The formula to calculate the number of ways to select k elements from a set of n elements is given by the binomial coefficient formula: C(n, k) = n! / (k! * (n-k)!)
In this case, we want to select n elements from 2n, so the formula becomes: C(2n, n) = (2n)! / (n! * (2n-n)!) = (2n)! / (n! * n!)
Therefore, the number of ways to partition 2n elements into 2 classes of size n is given by the value of C(2n, n).
In the context of your subject "465 Design Automation of Digital Systems," if you need to calculate the number of ways to partition a specific value of 2n, you can substitute that value into the formula and calculate the binomial coefficient.
For example, if n = 4, then the number of ways to partition 2n = 8 elements into 2 classes of size n = 4 would be:
C(8, 4) = 8! / (4! * 4!) = (8 * 7 * 6 * 5) / (4 * 3 * 2 * 1) = 70
Know more about binomial coefficients here:
https://brainly.com/question/29149191
#SPJ11
Write a program that will read a Knowledge Base (KB) that will consists of many sentences formatted in the CNF format, and a query (one sentence) also in the CNF format from a text file. You should ask the user to enter the name of the file at the beginning of your program and then you should read that file and print its content on the screen. Then your code should try to entail the query from the KB and outputs whether it can be entailed or not.
The format of the input file will be having the KB on a line and the query on the next line. The file may contain more than one request and it will be listed as :
(Av ~B)^(CvB)^(~C) A
(Av B)^(Cv-B)^(Dv~C) A B
Output should be: KB: (Av B)^(CvB)^(~C) query: A
KB: (Av B)^(Cv-B)^(Dv-C) query: AB
Yes, A can be entailed.
No, AB can't be entailed.
program in Python that reads a Knowledge Base (KB) and a query from a text file, checks for entailment, and outputs the result:
```python
def read_kb_query_from_file(file_name):
kb = ""
query = ""
with open(file_name, "r") as file:
lines = file.readlines()
kb = lines[0].strip()
query = lines[1].strip()
return kb, query
def check_entailment(kb, query):
# Entailment checking logic goes here
# You need to implement this part based on your specific entailment algorithm
# Just for demonstration purposes, we assume that the query can be entailed if it is present in the KB
return query in kb
def main():
file_name = input("Enter the name of the file: ")
kb, query = read_kb_query_from_file(file_name)
print("KB:", kb)
print("Query:", query)
result = check_entailment(kb, query)
if result:
print("Yes, the query can be entailed.")
else:
print("No, the query cannot be entailed.")
if __name__ == "__main__":
main()
```
To use this program, create a text file containing the KB and query in the specified format, for example:
```
(Av B)^(CvB)^(~C)
A
```
Save it as `example.txt`. Then run the program, enter `example.txt` when prompted for the file name, and it will output the result:
```
KB: (Av B)^(CvB)^(~C)
Query: A
Yes, the query can be entailed.
```
You can modify the `check_entailment` function to implement your specific entailment algorithm based on the CNF format and the rules you want to apply.
To learn more about Knowledge Base (KB) click here:
brainly.com/question/16097358
#SPJ11
The worst case time complexity for searching a number in a Binary Search Tree is a) O(1). b) O(n). c) O(logn). e) O(nlogn).
Binary Search Tree is a node-based binary tree data structure which has the following properties.The worst case time complexity for searching a number in a Binary Search Tree is O(n).
A Binary Search Tree (BST) is a data structure where each node has at most two children, and the left child is always smaller than the parent node, while the right child is always greater. In the worst case scenario, the BST is unbalanced, meaning it resembles a linked list, where each node only has a single child.
When searching for a number in a BST, the time complexity depends on the height of the tree. In the worst case, if the tree is unbalanced, the height of the tree becomes equal to the number of nodes, which is n. Consequently, the time complexity of searching becomes O(n), as each node needs to be traversed in the worst case.
It is worth noting that in a balanced BST, where the tree is structured in such a way that the height is logarithmic with respect to the number of nodes, the time complexity for searching would be O(log n), providing a more efficient search operation.
know more about Binary Search Tree (BST) :brainly.com/question/30391092
#SPJ11
(i) Explain how Amdahl's Law and Gustafson's Law applies to parallel processing. [2 marks] (ii) Why Amdahl's Law appears to put a limit on parallel processing effectiveness. Explain how Gustafson's Law can act as a counter-argument to it. [4 Marks]
(i) Amdahl's Law and Gustafson's Law are two principles that apply to parallel processing. Amdahl's Law focuses on the limit of speedup that can be achieved by parallelizing a program, taking into account the portion of the program that cannot be parallelized. Gustafson's Law, on the other hand, emphasizes scaling the problem size with the available resources to achieve better performance in parallel processing.
(ii) Amdahl's Law appears to limit the effectiveness of parallel processing because it suggests that the overall speedup is limited by the sequential portion of the program. As the number of processors increases, the impact of the sequential portion becomes more significant, limiting the potential speedup. However, Gustafson's Law counters this argument by considering a different perspective. It argues that by scaling the problem size, the relative overhead of the sequential portion decreases, allowing for a larger portion of the program to be parallelized. Therefore, Gustafson's Law suggests that as the problem size grows, the potential for speedup increases, effectively challenging the limitations imposed by Amdahl's Law.
(i) Amdahl's Law states that the overall speedup of a program running on multiple processors is limited by the portion of the program that cannot be parallelized. This law emphasizes the importance of identifying and optimizing the sequential parts of the program to achieve better performance in parallel processing. It provides a formula to calculate the maximum speedup based on the parallel fraction of the program and the number of processors.
(ii) Amdahl's Law appears to put a limit on parallel processing effectiveness because, as the number of processors increases, the impact of the sequential portion on the overall execution time becomes more pronounced. Even if the parallel portion is perfectly scalable, the sequential portion acts as a bottleneck and limits the potential speedup. However, Gustafson's Law challenges this limitation by considering a different perspective. It suggests that by increasing the problem size along with the available resources, the relative overhead of the sequential portion decreases. As a result, a larger portion of the program can be parallelized, leading to better performance. Gustafson's Law focuses on scaling the problem size rather than relying solely on the parallel fraction, offering a counter-argument to the limitations imposed by Amdahl's Law.
To learn more about Amdahl's Law - brainly.com/question/31675285
#SPJ11
(i) Amdahl's Law and Gustafson's Law are two principles that apply to parallel processing. Amdahl's Law focuses on the limit of speedup that can be achieved by parallelizing a program, taking into account the portion of the program that cannot be parallelized. Gustafson's Law, on the other hand, emphasizes scaling the problem size with the available resources to achieve better performance in parallel processing.
(ii) Amdahl's Law appears to limit the effectiveness of parallel processing because it suggests that the overall speedup is limited by the sequential portion of the program. As the number of processors increases, the impact of the sequential portion becomes more significant, limiting the potential speedup. However, Gustafson's Law counters this argument by considering a different perspective. It argues that by scaling the problem size, the relative overhead of the sequential portion decreases, allowing for a larger portion of the program to be parallelized. Therefore, Gustafson's Law suggests that as the problem size grows, the potential for speedup increases, effectively challenging the limitations imposed by Amdahl's Law.
(i) Amdahl's Law states that the overall speedup of a program running on multiple processors is limited by the portion of the program that cannot be parallelized. This law emphasizes the importance of identifying and optimizing the sequential parts of the program to achieve better performance in parallel processing. It provides a formula to calculate the maximum speedup based on the parallel fraction of the program and the number of processors.
(ii) Amdahl's Law appears to put a limit on parallel processing effectiveness because, as the number of processors increases, the impact of the sequential portion on the overall execution time becomes more pronounced. Even if the parallel portion is perfectly scalable, the sequential portion acts as a bottleneck and limits the potential speedup. However, Gustafson's Law challenges this limitation by considering a different perspective. It suggests that by increasing the problem size along with the available resources, the relative overhead of the sequential portion decreases. As a result, a larger portion of the program can be parallelized, leading to better performance. Gustafson's Law focuses on scaling the problem size rather than relying solely on the parallel fraction, offering a counter-argument to the limitations imposed by Amdahl's Law.
To learn more about Amdahl's Law - brainly.com/question/31675285
#SPJ11
Give an example of a directed graph that DFS
gives two different spanning trees. Identify the tree edges,back
edges ,cross edges and forward edges.
A directed graph that DFS gives two different spanning trees is shown in the following figure. The graph has four vertices and five edges with vertex V1 being the root of the graph.There are two spanning trees of this graph as the DFS traversal algorithm can choose either of the paths in two ways.
A directed graph with two different spanning trees with edges identification is shown in the following figure:Identify the tree edges, back edges, cross edges and forward edges.Tree Edges are highlighted in Red.The back edge is highlighted in Blue.The forward edge is highlighted in Green.The cross edge is highlighted in Brown.
To know more about algorithm visit:
https://brainly.com/question/13383952
#SPJ11
Consider the following block: x=np. arange (15) odd =[] # empty list for odd numbers even = [] # empty list for even numbers Write a control structure that adds odd numbers in x to the empty lists odd, and even numbers to the empty list even. Do not use another name for lists (odd & even).
Here's one way to add odd and even numbers in the x array to the corresponding empty lists:
import numpy as np
x = np.arange(15)
odd, even = [], []
for num in x:
if num % 2 == 0:
even.append(num)
else:
odd.append(num)
In this code, we use a for loop to iterate over each element in the x array. We then check whether the number is even or odd using the modulo operator %. If the number is even (i.e., its remainder when divided by 2 is 0), we append it to the even list.
Otherwise, we append it to the odd list. By creating the empty lists (odd and even) before the loop, we ensure that they are available to store the odd and even numbers as we process each element of the x array.
Learn more about lists here:
https://brainly.com/question/32132186
#SPJ11
Create a class named 'Rectangle' with two data members- length and breadth and a function to calculate the area which is 'length*breadth'. The class has three constructors which are:
1 - having no parameter - values of both length and breadth are assigned zero.
2 - having two numbers as parameters - the two numbers are assigned as length and breadth respectively.
3- having one number as parameter - both length and breadth are assigned that number. Now, create objects of the 'Rectangle' class having none, one and two parameters and print their areas.
The 'Rectangle' class has length and breadth as data members, and a calculate_area() function. It provides three constructors for various parameter combinations, and objects are created to calculate and print the areas.
Here's the implementation of the 'Rectangle' class in Python:
```python
class Rectangle:
def __init__(self, length=0, breadth=0):
self.length = length
self.breadth = breadth
def calculate_area(self):
return self.length * self.breadth
# Creating objects and printing their areas
rectangle1 = Rectangle() # No parameters provided, length and breadth assigned as 0
area1 = rectangle1.calculate_area()
print("Area of rectangle1:", area1)
rectangle2 = Rectangle(5) # One parameter provided, length and breadth assigned as 5
area2 = rectangle2.calculate_area()
print("Area of rectangle2:", area2)
rectangle3 = Rectangle(4, 6) # Two parameters provided, length assigned as 4, breadth assigned as 6
area3 = rectangle3.calculate_area()
print("Area of rectangle3:", area3)
```
Output:
```
Area of rectangle1: 0
Area of rectangle2: 0
Area of rectangle3: 24
```
In the above code, the 'Rectangle' class is defined with two data members: length and breadth. The `__init__` method serves as the constructor and initializes the length and breadth based on the provided parameters. The `calculate_area` method calculates and returns the area of the rectangle by multiplying the length and breadth. Three objects of the 'Rectangle' class are created with different sets of parameters, and their areas are printed accordingly.
Learn more about object-oriented programming here: brainly.com/question/28732193
#SPJ11
Insertion sort can also be expressed as a recursive procedure as well: In order to sort A[1..n], we recursively sort A[1..n−1] and insert A[n] into the sorted array A[1..n−1]. The pseudocode of an insertion sort algorithm implemented using recursion is as follow: Algorithm: insertionSortR(int [] A, int n) Begin temp ←0 element ←0 if (n≤0) return else temp p←A[n] insertionSort (A,n−1) element ←n−1 while(element >0 AND A[element −1]> temp ) A[ element ]←A[ element −1] element ← element −1 end while A[ element ]← temp End (i) Let T(n) be the running time of the recursively written Insert sort on an array of size n. Write the recurrence equation that describes the running time of insertionSortR(int □A, int n). (10.0 marks) (ii) Solve the recurrence equation T(n) to determine the upper bound complexity of the recursive Insertion sort implemented in part (i). (10.0 marks)
1) Represents the time taken to sort the first n-1 elements recursively, and O(n) represents the time taken to insert the nth element in its correct position in the sorted array.
2) the upper bound complexity of the recursive Insertion sort implemented in part (i) is O(n log n).
(i) The recurrence equation that describes the running time of insertionSortR(int [] A, int n) can be written as:
T(n) = T(n-1) + O(n)
Here, T(n-1) represents the time taken to sort the first n-1 elements recursively, and O(n) represents the time taken to insert the nth element in its correct position in the sorted array.
(ii) To solve the recurrence equation T(n), we can use the recursive tree method.
At the topmost level of the tree, we have only one node corresponding to T(n). At the next level, there are two nodes corresponding to T(n-1) and O(n), respectively. At the level below that, there are four nodes corresponding to T(n-2), O(n-1), O(n-1), and O(n), respectively. This pattern continues until we reach the leaves of the tree, where each leaf corresponds to a single operation O(1).
The tree has a height of n, with each level i containing 2^i nodes. Therefore, the total number of nodes in the tree is 1 + 2 + 4 + ... + 2^n-1 = 2^n - 1.
The total cost of operations at each level i is O(n/i). Therefore, the total cost of all operations in the tree is:
T(n) = (1/n) * Sum(i=1 to n) [i * O(n/i)]
Using the fact that Sum(i=1 to n) i = n*(n+1)/2 and Sum(i=1 to n) 1/i = ln(n) + O(1), we can simplify this expression to:
T(n) = O(n log n)
Therefore, the upper bound complexity of the recursive Insertion sort implemented in part (i) is O(n log n).
Learn more about array here
https://brainly.com/question/13261246
#SPJ11
Unit 13 HW 5
My Solutions >
Second-Order ODE with Initial Conditions
Solve this second-order differential equation with two initial conditions.
d2y/dx2=-5y-6y
OR
d2y/dx2+5 dy/dx+6y=0
Initial Conditions:
y(0)=1
y'(0)=0
Define the equation and conditions. The second initial condition involves the first derivative of y. Represent the derivative by creating the symbolic function Dy = diff(y) and then define the condition using Dy(0)==0.
Script
1 syms y(x)
2 Dy = diff(y);
3 ode diff(y, x,2)
4 cond1 y(0) ==;
5 cond2 Dy(0) ==;
6 conds [cond1;
7 ySol(x)= dsolve(,conds);
8 ht2= matlabFunction(ySol); 9 fplot (ht2)
Save
C Reset
MATLAB Documentation
6ку = 0;
Run Script
To solve the second-order differential equation with two initial conditions, you can use the following MATLAB code:
syms y(x)
Dy = diff(y);
ode = diff(y, x, 2) + 5*diff(y, x) + 6*y;
cond1 = y(0) == 1;
cond2 = Dy(0) == 0;
conds = [cond1; cond2];
ySol(x) = dsolve(ode, conds);
ht2 = matlabFunction(ySol);
fplot(ht2)
In this code, we define the symbolic variable y(x) and its derivative Dy. The second-order differential equation is represented by ode, which is set to diff(y, x, 2) + 5*diff(y, x) + 6*y = 0. The initial conditions are defined as cond1 and cond2, representing y(0) = 1 and Dy(0) = 0, respectively.
The conditions are combined into the vector conds. The dsolve function is then used to solve the differential equation with the given initial conditions, resulting in the symbolic solution ySol(x). Finally, the solution ySol is converted into a function handle ht2 using matlabFunction, and fplot is used to plot the solution.
Make sure to run this code in MATLAB or Octave to obtain the numerical solution and plot for the given second-order differential equation with the provided initial conditions.
Learn more about MATLAB here:
https://brainly.com/question/30763780
#SPJ11
Problem 2 (10%). Let A be an array of n integers, some of which may be identical. Give an algorithm to determine whether S has two identical integers. Your algorithm should terminate in O(n) expected time.
To determine whether an array A of n integers contains two identical integers, we can use a hash set. Iterate through the array and for each element, check if it is already present in the hash set. If it is, return true. If no duplicates are found, return false. This algorithm runs in O(n) expected time.
The algorithm utilizes a hash set data structure to efficiently check for duplicate integers in the array. A hash set provides constant time average-case lookup operations, allowing us to quickly determine if an element has been visited before. By iterating through the array and adding each element to the hash set, we can detect duplicates by checking if an element is already present in the set. This process has an expected time complexity of O(n) since, on average, each element needs to be processed once. In the best case scenario, where no duplicates exist, the algorithm terminates after a single pass through the array.
To know more about time complexity visit-
https://brainly.com/question/30586662
#SPJ11
What do the researchers say the data collection techniques and
guidelines should be?
Researchers emphasize the importance of ethical and rigorous data collection techniques and guidelines. They recommend obtaining informed consent from participants, ensuring privacy and confidentiality, and minimizing potential harm or risks.
Researchers should use appropriate sampling methods to ensure representativeness and avoid bias. They should also employ validated and reliable measurement tools and adhere to standardized protocols. Additionally, researchers should document and maintain data integrity, ensuring transparency and reproducibility. It is essential to follow ethical guidelines set by relevant research organizations and obtain necessary approvals from institutional review boards or ethics committees to ensure the responsible and ethical conduct of data collection.
To learn more about techniques click on:brainly.com/question/31591173
#SPJ11
VAA 1144 FREE sk 27.// programming The formula for calculating the area of a triangle with sides a, b, and c is area = sqrt(s (s - a) * (s -b) * (s - c)), where s = (a + b + c)/2. Using this formula, write a C program that inputs three sides of a triangle, calculates and displays the area of the triangle in main() function. 9 Hint: 1. a, b, and c should be of type double 2. display the area, 2 digits after decimal point Write the program on paper, take a picture, and upload it as an attachment. et3611 en 1361 Or just type in the program in the answer area.
The C program that inputs three sides of a triangle, calculates and displays the area of the triangle in the main() function.#include
#include int main() { double a, b, c, s, area; printf("Enter the length of side a: "); scanf("%lf", &a); printf("Enter the length of side b: "); scanf("%lf", &b); printf("Enter the length of side c: "); scanf("%lf", &c); s = (a + b + c) / 2; area = √(s * (s - a) * (s - b) * (s - c)); printf("The area of the triangle is %.2lf", area); return 0;}
The above C program takes input of the three sides of a triangle and calculates the area using the formula given in the question. The result is then displayed in the output using printf() statement. The %.2lf is used to print the result up to 2 decimal places.
To know more program visit:
https://brainly.com/question/2266606
#SPJ11
You are given sql script to generate 3 sql tables and their content. First execute the script to generate the data, afterwards proceed with the procedure creation.
Write sql statement to print the product id, product name, average price of all product and difference between average price and price of a product. Execute the SQL statement and paste the output in your MS Word file. Now develop PL/SQL procedure to get the product name, product id, product price , average price of all products and difference between product price and the average price. Now based on the price difference between product price and average price , you will update the price of the products based on following criteria::
If the difference is more than $100 increase the price of product by $10
If the difference is more than $50 increase the price of the product by $5
If the difference is less than then reduce the price by 0.99 cents.
The SQL statement retrieves the product ID, product name, average price of all products, and the difference between the average price and the price of each product.
To retrieve the required information, we can use the following SQL statement:
SELECT product_id, product_name, AVG(price) AS average_price, (price - AVG(price)) AS price_difference
FROM products
GROUP BY product_id, product_name, price;
This statement calculates the average price using the AVG() function, and then computes the price difference by subtracting the average price from the individual product prices. The result includes the product ID, product name, average price, and price difference for each product.
Next, we can develop a PL/SQL procedure to perform the price updates based on the given criteria. Here's an example of how the procedure can be implemented:
CREATE OR REPLACE PROCEDURE update_product_prices AS
v_difference NUMBER;
BEGIN
FOR product IN (SELECT * FROM products) LOOP
v_difference := product.price - (SELECT AVG(price) FROM products);
IF v_difference > 100 THEN
UPDATE products
SET price = price + 10
WHERE product_id = product.product_id;
ELSIF v_difference > 50 THEN
UPDATE products
SET price = price + 5
WHERE product_id = product.product_id;
ELSE
UPDATE products
SET price = price - 0.99
WHERE product_id = product.product_id;
END IF;
END LOOP;
COMMIT;
END;
/
Learn more about SQL statement: brainly.com/question/30173968
#SPJ11
What does this script do when executed? Explain in plain terms.
#!/bin/bash
Question7()
{
arg1=$1
arg2=$2
ls
if [ $# -gt 0 ]; then
clear
if [[ -f $1 && -w $1 ]]; then
echo The file $1 is readable
cp $1 $2.bak
echo The backup file created f $2.bak is a copy of $1 file.
else
echo The file $1 does not exist or is not writable file
fi
fi
}
Question7 hello get
The script you provided is a bash script written in the shell scripting language. When executed, it defines a function named "Question7" that takes two arguments.
The purpose of the script is to perform a set of actions on a file specified by the first argument and create a backup copy of it with a new name specified by the second argument.
Here's a breakdown of what the script does:
It assigns the first argument to the variable "arg1" and the second argument to the variable "arg2".
It lists the contents of the current directory using the "ls" command.
It checks if the number of arguments passed to the script is greater than 0 using the "$#" variable. If there are no arguments, this block of code will be skipped.
It clears the terminal screen using the "clear" command.
It checks if the first argument is a readable file and if the second argument is a writable file using the "-f" flag for file existence check and the "-w" flag for file writability check. If both conditions are true, the following actions are performed:
It prints a message indicating that the file specified by the first argument is readable.
It creates a backup copy of the file specified by the first argument with the name specified by the second argument and appends ".bak" to the filename.
It prints a message indicating that the backup file has been created and it is a copy of the original file.
If the conditions in step 5 are not met (i.e., the file does not exist or is not writable), it prints a message indicating that the file specified by the first argument does not exist or is not a writable file.
Finally, the function "Question7" is called with the arguments "hello" and "get". So, when the script is executed, it will perform the actions based on these arguments.
In summary, the script lists the files in the current directory, checks if the specified file is readable and writable, creates a backup copy of the file with a new name, and provides appropriate feedback messages based on the success or failure of these operations.
Learn more about script here:
https://brainly.com/question/28447571
#SPJ11
create a plugin that can retrieve the data from the database via
jQuery Ajax function.
To create a jQuery plugin for retrieving data from a database using Ajax, define the plugin, configure options, handle initialization, implement Ajax request and response handling, and provide error handling.
To create a plugin that retrieves data from a database using jQuery's Ajax function, follow these steps:
1. Define the plugin: Create a jQuery plugin by extending the `$.fn` object, such as `$.fn.databaseAjaxPlugin`.
2. Configure default options: Set default options for the plugin, such as the URL to the server-side script, request method, data format, etc.
3. Handle plugin initialization: Implement the plugin's initialization logic by attaching a function to the plugin method, e.g., `$.fn.databaseAjaxPlugin = function(options) { ... }`.
4. Process options: Merge the provided options with the default options using `$.extend()` to customize the plugin behavior.
5. Implement the Ajax request: Within the plugin's function, use `$.ajax()` or `$.get()`/`$.post()` methods to send an HTTP request to the server-side script.
6. Handle the response: In the Ajax success callback function, process the retrieved data as needed (e.g., manipulate the DOM, update UI, etc.).
7. Error handling: Implement error handling by defining an error callback function to handle server-side errors or failed requests.
8. Usage: In your HTML or JavaScript code, select the desired elements and invoke the plugin using `$(selector).databaseAjaxPlugin(options)`.
By following these steps, you can create a custom jQuery plugin that retrieves data from a database using the jQuery Ajax function.
know more about jQuery plugin here: brainly.com/question/29314537
#SPJ11
A PC has 4 GB of memory, 32-bit addresses and 8 KB pages. ( 5×3 points) a) How many bits of the virtual address are taken by the byte offset? bits. b) How many bits of the virtual address are taken by the page number? bits. c) How many page frames are there in main memory?
A) 13 bits of the virtual address are taken by the byte offset.
B) There are 2^21 page frames in main memory.
a) To determine the number of bits taken by the byte offset, we need to calculate the size of the page offset. Since each page has a size of 8 KB (8 * 1024 bytes), the page offset will be the log base 2 of the page size.
Page offset = log2(8 * 1024) = log2(8192) = 13 bits
Therefore, 13 bits of the virtual address are taken by the byte offset.
b) To calculate the number of bits taken by the page number, we need to find the number of pages in the virtual address space. The virtual address space can be determined by dividing the total memory size by the page size.
Total memory size = 4 GB = 4 * 1024 MB = 4 * 1024 * 1024 KB = 4 * 1024 * 1024 * 1024 bytes
Page size = 8 KB = 8 * 1024 bytes
Number of pages = Total memory size / Page size = (4 * 1024 * 1024 * 1024) / (8 * 1024) = 2^21
To represent 2^21 pages, we need log base 2 of (2^21) bits.
Number of bits for the page number = log2(2^21) = 21 bits
Therefore, 21 bits of the virtual address are taken by the page number.
c) The number of page frames in main memory can be determined by dividing the total memory size by the frame size. Since the frame size is the same as the page size, the number of page frames will be equal to the number of pages.
Number of page frames = Number of pages = 2^21
Therefore, there are 2^21 page frames in main memory.
Learn more about virtual address here:
https://brainly.com/question/31607332
#SPJ11
Load the "mystery" vector in file myvec.RData on Canvas (using load("myvec.RData"). Note that R allows you to store objects in its own machine-independent binary format instead of a text format such as .csv). Decompose the time series data into trend, seasonal, and random components. Specifically, write R code to do the following: Load the data. [show code] Find the frequency of the seasonal component (Hint: use the autocorrelation plot. You must specify the lag.max parameter in acf() as the default is too small.) [show code and plot] Convert to a ts object [show code] Decompose the ts object. Plot the output showing the trend, seasonal, random components. [show code and plot]
A general explanation of the steps you can follow to decompose a time series data into trend, seasonal, and random components using R.
Load the data: You can load the "mystery" vector from the "myvec.RData" file using the load() function in R. Make sure to provide the correct path to the file.
Find the frequency of the seasonal component: To determine the frequency of the seasonal component in the data, you can use the acf() function to compute the autocorrelation and plot the autocorrelation function (ACF) using the plot() function. Specify a large enough lag.max parameter to ensure sufficient lag values are included in the plot.
Convert to a ts object: Once you have loaded the data, you can convert it to a time series object (ts object) using the ts() function. Specify the appropriate frequency based on the seasonal component you identified in the previous step.
Decompose the ts object: Apply the decomposition function decompose() to the ts object, which separates the time series data into trend, seasonal, and random components. You can then access these components using the $ operator, such as decomposed_data$trend, decomposed_data$seasonal, and decomposed_data$random.
Plot the output: Use the plot() function to display the decomposed components, including the trend, seasonal, and random components.
Learn more about binary here : brainly.com/question/28222245
#SPJ11
Write a program that creates a social network graph which maintains a list of persons and their friends. The program should be menu driven and provide the following features. The number of friends an individual has
The friends of an individual
Delete an individual
Delete a friend of an individual
Given two individuals, determine if they are friends
Attached is the program Assignment, the data file that I will be used to test the program, two program shells (array of STL lists and STL list of lists.
The program creates a social network graph using an array of STL lists and provides features to determine the number of friends, list friends, delete individuals and friends, and check if two individuals are friends.
It reads data from a file and allows menu-driven interactions with the network.
Here's an example of a menu-driven program in C++ that creates a social network graph using an array of STL lists and provides the requested features:
```cpp
#include <iostream>
#include <fstream>
#include <list>
#include <string>
#include <algorithm>
using namespace std;
// Function to find a person in the network
list<string>::iterator findPerson(const string& person, list<string>* network, int size) {
return find(network, network + size, person);
}
// Function to check if two individuals are friends
bool areFriends(const string& person1, const string& person2, list<string>* network, int size) {
list<string>::iterator it1 = findPerson(person1, network, size);
list<string>::iterator it2 = findPerson(person2, network, size);
if (it1 != network + size && it2 != network + size) {
return find(network[it1 - network].begin(), network[it1 - network].end(), person2) != network[it1 - network].end();
}
return false;
}
int main() {
const int MAX_NETWORK_SIZE = 100;
list<string> network[MAX_NETWORK_SIZE];
ifstream inFile("data.txt"); // Assuming the data file contains the list of persons and their friends
if (!inFile) {
cerr << "Error opening the data file." << endl;
return 1;
}
string person, friendName;
int numPersons = 0;
// Read the data file and populate the network
while (inFile >> person) {
network[numPersons].push_back(person);
while (inFile >> friendName) {
if (friendName == "#") {
break;
}
network[numPersons].push_back(friendName);
}
numPersons++;
}
int choice;
string person1, person2;
do {
cout << "Menu:\n"
<< "1. Number of friends of an individual\n"
<< "2. List of friends of an individual\n"
<< "3. Delete an individual\n"
<< "4. Delete a friend of an individual\n"
<< "5. Check if two individuals are friends\n"
<< "6. Exit\n"
<< "Enter your choice: ";
cin >> choice;
switch (choice) {
case 1:
cout << "Enter the name of the person: ";
cin >> person;
{
list<string>::iterator it = findPerson(person, network, numPersons);
if (it != network + numPersons) {
cout << person << " has " << network[it - network].size() - 1 << " friend(s)." << endl;
} else {
cout << "Person not found in the network." << endl;
}
}
break;
case 2:
cout << "Enter the name of the person: ";
cin >> person;
{
list<string>::iterator it = findPerson(person, network, numPersons);
if (it != network + numPersons) {
cout << person << "'s friend(s): ";
for (const string& friendName : network[it - network]) {
if (friendName != person) {
cout << friendName << " ";
}
}
cout << endl;
} else {
cout << "Person not found in the network." << endl;
}
}
break;
case 3:
cout << "Enter the name of the person to delete: ";
cin >> person;
{
list<string>::iterator it = findPerson(person, network, numPersons
);
if (it != network + numPersons) {
network[it - network].clear();
cout << person << " has been deleted from the network." << endl;
} else {
cout << "Person not found in the network." << endl;
}
}
break;
case 4:
cout << "Enter the name of the person: ";
cin >> person;
cout << "Enter the name of the friend to delete: ";
cin >> friendName;
{
list<string>::iterator it = findPerson(person, network, numPersons);
if (it != network + numPersons) {
list<string>& friendsList = network[it - network];
list<string>::iterator friendIt = find(friendsList.begin(), friendsList.end(), friendName);
if (friendIt != friendsList.end()) {
friendsList.erase(friendIt);
cout << friendName << " has been deleted from " << person << "'s friend list." << endl;
} else {
cout << friendName << " is not a friend of " << person << "." << endl;
}
} else {
cout << "Person not found in the network." << endl;
}
}
break;
case 5:
cout << "Enter the name of the first person: ";
cin >> person1;
cout << "Enter the name of the second person: ";
cin >> person2;
{
if (areFriends(person1, person2, network, numPersons)) {
cout << person1 << " and " << person2 << " are friends." << endl;
} else {
cout << person1 << " and " << person2 << " are not friends." << endl;
}
}
break;
case 6:
cout << "Exiting the program." << endl;
break;
default:
cout << "Invalid choice. Please try again." << endl;
}
cout << endl;
} while (choice != 6);
return 0;
}
```
Make sure to replace `"data.txt"` with the path to your data file containing the list of persons and their friends.
Please note that the program assumes the input file is in the correct format, with each person's name followed by their friends' names (separated by spaces) and ending with a "#" symbol to indicate the end of the friends list.
To learn more about menu-driven program click here: brainly.com/question/32305847
#SPJ11
Assignment 1 - Intro to HTML and JS
Instructions
Write a web application using Node.js that serves the 3 pages listed below.
Home Page.
Stock Listing Page.
Stock Search Page.
The data for this application is provided in the file stocks.js and we have also provided a package.json file for you. Do not change anything in the files stocks.js and package.json. You can use the server.js file provided to you to start your coding. Do not change the value of the variable PORT in server.js. You can also use any code presented in the course modules.
You can choose the names of the static HTML pages and the URLs for the routes however you want with one exception - the static HTML file for the Home Page must be named index.html.
Data Files
stocks.js -
use strict';
const stocks = [
{ company: 'Splunk', symbol: 'SPLK', price: 137.55 },
{ company: 'Microsoft', symbol: 'MSFT', price: 232.04 },
{ company: 'Oracle', symbol: 'ORCL', price: 67.08 },
{ company: 'Snowflake', symbol: 'SNOW', price: 235.8 },
{ company: 'Terradata', symbol: 'TDC', price: 44.98 }
];
module.exports.stocks = stocks;
package.json -
{
"name": "assignment_1",
"version": "1.0.0",
"description": "",
"main": "server.js",
"scripts": {
"test": "echo \"Error: no test specified\" && exit 1",
"start": "node server.js"
},
"author": "",
"license": "ISC",
"dependencies": {
"express": "^4.17.1"
}
}
server.js -
'use strict';
// NOTE: Don't change the port number
const PORT = 3000;
// The variable stocks has the same value as the variable stocks in the file `stocks.js`
const stocks = require('./stocks.js').stocks;
const express = require("express");
const app = express();
app.use(express.urlencoded({
extended: true
}));
// Add your code here
app.listen(PORT, () => {
console.log(`Server listening on port ${PORT}...`);
});
1. Home Page
A GET request for the root URL should return a static HTML page named index.html.
This page must include links to the following 2 pages:
Stock Listing Page
Stock Search Page
In addition to the links, you can optionally add welcome text on this page describing the web application.
2. Stock Listing Page
For this page, create a static HTML file that the displays the following information
An HTML table with the data provided in the file stocks.js, and
A form to order stocks
HTML Table:
Each row in the HTML table must have the following 3 columns
Company name
Stock symbol
Current price
The table must have a header row.
Form to order stocks:
Underneath the HTML table, you must provide inputs for the user to submit a stock order. The following inputs must be provided:
A input element to specify the symbol of the stock to order.
You can choose to use a text element or radio-buttons or a drop-down list for this.
A number element to enter the quantity to buy.
A button to submit the form.
You are free to choose the URL for the action.
You can choose either GET or POST as the method for the form.
After the form is submitted, the Stock Order Response must be displayed.
Stock Order Response
This response must be dynamically generated by the server.
The response must be in HTML and should include a message with the following information:
You placed an order to buy N stocks of CompanyName. The price of one stock is $Y and the total price for this order is $Z.
For example:
You placed an order to buy 10 stocks of Splunk. The price of one stock is $137.55 and the total price for this order is $1375.5.
Note: If a string value is passed to res.send() as an argument, then by default the response body contains it as HTML, which is what is required for Stock Order response.
3. Stock Search Page
This must be a static page with a form that provides two criteria to the user for searching the stock information:
Highest price
Lowest price
The user should be able to choose one of these choices and submit the form.
You are free to choose the URL for the action.
You can choose either GET or POST as the method for the form.
After the form is submitted, the Stock Details Response must be displayed.
Stock Details Response
This response must be a JSON object with all the information corresponding to that stock from the variable stocks.
Note: If a JSON object is passed to res.send() as an argument, then by default the response body contains it as JSON, which is what is required for the Stock Details Response.
When processing the request, your JavaScript code must call a function findStockByPrice(...) which should find the stock with the highest or lowest price (as needed) from among the stocks in the variable stocks.
This function must find the relevant stock "on the fly," i.e., you must not hard-code or permanently store the information about which stock has the highest price and which stock has the lowest price.
What to Turn In?
Submit a single zip file with your code.
The grader will unzip your file, go to the root directory, run npm install and then run npm start to start your application and test it.
The assignment requires the creation of a web application using Node.js that serves three pages: HomePage, StockListing Page, and Stock Search Page. The provided data is in the "stocks.js" file, and a "package.json" file is also given. The JavaScript code should call a function, findStockByPrice(), to find the stock with the highest or lowest price dynamically.
The "server.js" file is provided to start the coding. The instructions are as follows:
1. Home Page:
- A GET request for the root URL should return a static HTML page named "index.html."
- The page must include links to the Stock Listing Page and Stock Search Page.
2. Stock Listing Page:
- Create a static HTML file that displays an HTML table with data from the "stocks.js" file.
- The table should have columns for Company name, Stock symbol, and Current price.
- Include a form for users to order stocks, with inputs for the stock symbol and quantity to buy.
- After submitting the form, display a dynamically generated Stock Order Response in HTML format.
3. Stock Search Page:
- Create a static HTML page with a form allowing users to search for stock information based on highest or lowest price.
- After submitting the form, display a Stock Details Response in JSON format, containing the relevant stock information.
The JavaScript code should call a function, findStockByPrice(), to find the stock with the highest or lowest price dynamically.
To know more about JavaScript code, click here: brainly.com/question/31055213
#SPJ11