Based on the information provided, I would recommend the Sunburst Variety of corn as the best choice for growing in the drought conditions of the desert environment.
What is the corn about?Sunburst Variety of corn has been specifically developed to be drought-tolerant, meaning that it can survive and produce a good yield even with minimal rainfall.
Therefore, I would recommend the Sunburst variety of corn as the best choice for growing in the desert environment due to its drought-tolerance, deep root system, heat tolerance, high yield, and good quality grain.
Learn more about corn from
https://brainly.com/question/397421
#SPJ1
what do animals use for energy in food
A. GROWTH
B. REPAIR
C. MOTION
D. PHOTOSYNTHESIS
Classify each of the following amines as primary (1°), secondary (2°), or tertiary (3°):
Drag the appropriate items to their respective bins.
Primary (1°) amine
Secondary (2°) amine
Tertiary (3°) amine
Functional group can be interconverted into each their by the means of suitable reagent. Functional group are responsible for the chemical and physical properties of a compound. Therefore in the below given ways compound can bee classified.
What is functional group?A group of atoms forming a component of a molecule that accounts for a particular function or chemical behavior is called a functional group. There are so many functional group in organic chemistry.
first compound-------- secondary (2°)
second compound-------------- secondary (2°)
third compound-------------------- tertiary (3°)
fourth compound ----------------primary (1°)
fifth compound---------------primary (1°)
Therefore in the above given ways compound can bee classified.
To know more about functional group, here:
https://brainly.com/question/14618322
#SPJ1
What are the uses of the metal Magnesium?
Answer:
use of sterile injections for clearanti bodies
Explanation:
Answer:
Hello There!!
Explanation:
They can be used in making products that make it lightweight such as in power tools and luggages.
hope this helps,have a great day!!
~Pinky~
What is the first quantum number of the 3p¹ electron in aluminum,
1s²2s²2p63s²3p¹?
A. n=0
B. n = 1
C. n=3
D. n = 2
Quantum number of the 3p¹ electron in aluminum is n=3.
What is the quantum number?Quantum numbers in quantum physics and chemistry explain the values of conserved quantities in a quantum system's dynamics. Quantum numbers are quantities that can be precisely known at the same time as the system's energy and are related to the eigenvalues of operators that commute with the Hamiltonian and their corresponding eigenspaces. A base state of a quantum system is fully described by the specification of all of its quantum numbers, which can theoretically be measured collectively.
The quantization of numerous interesting observable quantities is a crucial component of quantum physics.
This specifically results in quantum numbers, though they may occasionally reach infinity, that take values in discrete sets of integers or half-integers. This sets quantum mechanics apart from conventional mechanics.
Learn more about quantum number here: https://brainly.com/question/5215315
#SPJ1
17. A balloon contains 4.50 X 1022 atoms of helium gas. Calculate the mass of helium in
grams.
Answer:
1.08 grams
Explanation:
first, we need to find the number of moles
we divide 12.1/22.4=0.54 moles
we multiply the number of moles with the molecular mass 0.54x2=1.08g
The mass of the helium will be 0.296 g He.
What is mass?
The quantity of matter in a thing is measured by its mass. Grams (g) or kilograms (kg) are the most common units of mass measurement (kg).The quantity of matter is measured in terms of mass, regardless of where it is in the universe or the gravitational force acting on it.
Calculation of mass of helium:
It is given that, atom of He = 4.50 X [tex]10^{22}[/tex] , mass of He = 4 g.
4.50 X [tex]10^{22}[/tex] atoms He × 1 mole He / 6.02 × [tex]10^{23}[/tex] atom He = 0.0914 mol He.
Now, apply the conversion formula:
Moles He × grams He / 1 mole He = grams He.
Put the value of given data in above formula.
0.0914 mol He × 4 g / 1 mol He = 0.296 g He.
Therefore, the mass of the helium will be 0.296 g He.
To know more about mass click here.
https://brainly.com/question/11622869.
#SPJ2
Explain how an incorrect of dietary information on high blood sugar could potentially affect the patient’s
Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.
What effects could an extremely high blood sugar level have on us?If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.
What dietary requirements are impacted by diabetes?A high-fat, high-calorie, and high-cholesterol diet
To know more about high blood sugar visit:-
https://brainly.com/question/29749982
#SPJ1
Which type of lipids/fats increase cholesterol levels in the
blood?
saturated lipids
unsaturated lipids
Answer:
In humans, saturated fat intake increases LDL cholesterol in comparison with all nutrients except trans fats [2•]. Because saturated fat also increases high-density lipoprotein (HDL) cholesterol, the total cholesterol (TC) to HDL cholesterol ratio (a risk marker for CVD) is not altered. I would like Brainleist please!
Explanation:
What's the most unreactive metal?
Answer:
gold and platinum
Explanation:
Very unreactive metals, such as gold and platinum, are found in the Earth's crust as pure metals. These are called native metals.
Which electron configuration represents a transition element?
01s²2s²2p³
01522s22p635²
1s²2s²2p63s²3p64s²3d7
1s22s22p63s23p64s²3d¹04p4
The electronic configuration which represents a transition element is 1s²2s²2p⁶3s²3p⁶4s²3d⁷
What is a transition element?Transition elements are placed between the metallic S-block elements and nonmetallic P-block elements in the periodic table. They are D-block elements and have features similar to both metals and nonmetals, to some extent. This is why they are called transition elements.
One remarkable feature of these elements happens during the addition of electrons to them. Contrary to S and P-block elements, electrons are added to the penultimate shell, not the last shell. These elements often feature partially filled d-orbitals and have multiple oxidation states.
To learn more about transition element click here:
brainly.com/question/2102444
#SPJ1
Nothing. Finished my AP chem test n wanna give some points out
Answer:
Nice
Explanation:
Answer:
thanks girl
Explanation:
A discarded spray paint can contains only a small volume of the propellant gas at a
pressure of 34.5 kPa. The volume of the can is 473 ml. If the can is run over by the
garbage truck and flattened to a volume of 13.16 ml, what is the pressure in kPa
assuming the can doesn't leak?
Answer:
1.24 × 10³ kPa
Explanation:
Step 1: Given data
Initial pressure of the gas (P₁): 34.5 kPaInitial volume of the can (V₁): 473 mLFinal pressure of the gas (P₂): ?Final volume of the can (V₂): 13.16 mLStep 2: Calculate the final pressure of the gas in the can
If we assume that the gas in the can behaves as an ideal gas and that the temperature remains constant, we can calculate the final pressure of the gas using Boyle's law.
P₁ × V₁ = P₂ × V₂
P₂ = P₁ × V₁ / V₂
P₂ = 34.5 kPa × 473 mL / 13.16 mL = 1.24 × 10³ kPa
When guard cells are full, they bulge. This increases the
size of the gap between them and opens the hole in the
leaf.
Guard cell
Water and
oxygen
Carbon
dioxide
Guard cell
Which object is the best model of a guard cell?
Guard cells are the plant cells that are specialized to perform the gaseous exchange in the leaves. It can be best represented by the model of the water balloon.
What are guard cells?Guard cells are the part of the plant leaves and stem that are essential for the control and exchange of the water, oxygen, and carbon dioxide molecules from the cell environment to the surroundings.
It regulates the closing and the opening of the stomata that become curved when open to make a hole in the middle. When water is present inside the cells they swell making the cell look bulgy like the water in a balloon.
Therefore, the water balloon model best explains the guard cells.
Learn more about guard cells here:
https://brainly.com/question/23460800
#SPJ2
If you get the question right i will give brainliest (HINT ITS NOT A)
Answer:
Explanation:
its b, i looked it up
should I go ahead and complete the last assignment of the 9th grade? I got a week till I have to turn it in. I can complete it in about an hour. What do yall think?
Answer:
I think you should, after you complete it and turn it in then you have nothing else to worry about! Get it out the way and do it :)
Answer:
Heres my advice. Dont wait exactly until the deadline.
Explanation:
If its the last assignment, be lazy. do what you want! but, if you only have a week to turn it in then do it on the 4th day then turn it in.
A block of metal has a mass of 18.361kg and the following dimensions: 22.35 cm x 7.34 cm x 22.05 mm. What is the density of the metal in g/cm^3
Answer:
50.76 g/cm³
Explanation:
We'll begin by converting 18.361 Kg to g. This can be obtained as follow:
1 Kg = 1000 g
Therefore,
18.361 Kg = 18.361 Kg × 1000 g / 1 Kg
18.361 Kg = 18361 g
Next, we shall express the dimension in the same unit of measurement.
Dimension = 22.35 cm x 7.34 cm x 22.05 mm
Thus, we shall convert 22.05 mm to cm. This can be obtained as follow:
10 mm = 1 cm
Therefore,
22.05 mm = 22.05 mm × 1 cm / 10 mm
22.05 mm = 2.205 cm
Thus, the dimension is 22.35 cm x 7.34 cm x 2.205 cm.
Next, we shall determine the volume of the metal. This can be obtained as follow:
Dimension = 22.35 cm x 7.34 cm x 2.205 cm.
Volume = 361.728045 cm³
Finally, we shall determine the density of the metal. This can be obtained as follow:
Mass of metal = 18361 g
Volume of metal = 361.728045 cm³
Density of metal =?
Density = mass / volume
Density of metal = 18361 / 361.728045
Density of metal = 50.76 g/cm³
A group of electrons is treated as a point charge of -1.12 x 10-18 C. How many electrons make up this point charge? Remember that each electron has a charge of -1.602 x 10-19 C. o 2 o 4 4 07
Answer:
7
Explanation:
Given that the total charge is given by;
C =nq
Where;
n = number of charges
q = quantity of charge
Where the total amount of charge is -1.12 x 10-18 C and the magnitude of each charge is -1.602 x 10-19 C
Then the number of electrons is obtained from;
n = -1.12 x 10-18 C/ -1.602 x 10-19 C
n = 7
What effect does light have on the growth of plants?
Select all that apply.
Light does not have any effect on a plant’s growth.
Light makes a plant’s stem grow shorter.
Light makes a plant’s leaves turn brown.
Light will make a plant’s leaves grow bigger.
Answer:
The answer is the last one only.
Explanation:
Light/sun gives energy and growth which makes the plants leaves/plant grow bigger.
Explanation:
Without the sun, plants wouldn't get the food that's needed to grow, reproduce and survive. plants need sunlight, water and carbon dioxide to live.
Spilled oil is considered a pollutant. Why is this so? Describe some way of cleaning oil after a spill
Answer: use methods to clean up ocean oil spills
Explanation:
How many moles are in 18.3 grams of Carbon?
Answer:
1.5236414197340638
The ratio of the elements in a binary ionic compound are based on the element's _______________.
A. oxidation number
B. mass number
C. total number of neutrons
In a cycle of copper experiment, a student first reacts a piece of copper metal with nitric acid to produce copper(II) nitrate (Cu(NO3)2) solution. The student then performs various reactions which transform the copper ions into a series of different copper compounds and complexes. Finally, the last reaction reduces the copper ions back to elemental copper metal. Copper atoms are conserved throughout the process. If the initial step of the experiment produces 4.12 mL of 2.41 M Cu(NO3)2, what is the theoretical yield of solid copper (Cu) that can be recovered at the end of the experiment
Answer:
0.631 grams is the theoretical yield of solid copper (Cu) that can be recovered at the end of the experiment
Explanation:
The concentration of the solution is given by :
[tex][C]=\frac{\text{Moles of compound}}{\text{Volume of solution in Liters}}[/tex]
We have:
Concentration of copper (II) nitrate solution = [tex][Cu(NO_3)_2]=2.41 M[/tex]
The volume of solution = 4.12 mL
1 mL= 0.001 L
[tex]4.12 mL= 4.12\times 0.001 L= 0.00412 L[/tex]
Moles of copper (II) nitrate in solution = n
[tex]2.41=\frac{n}{0.00412 L}=0.0099292 mol[/tex]
Moles of copper (II) nitrate in solution = 0.0099292 mol
1 Mole of copper(II) nitrate has 1 mole of copper then 0.0099292 moles of copper(II) nitrate will have :
[tex]1\times 0.0099292 mol= 0.0099292 \text{ mol of Cu}[/tex]
Mass of 0.0099292 moles of copper:
[tex]=0.0099292 mol\times 63.55 g/mol=0.63100 g\approx 0.631 g[/tex]
This mass of copper present in the solution is the theoretical mass of copper present in the given copper(II) nitrate solution.
0.631 grams is the theoretical yield of solid copper (Cu) that can be recovered at the end of the experiment
How many moles are in 20.5 grams of Calcium (Ca)? (1pt)
A)762.45 moles
B)1 mole
C)2 moles
D)0.5 moles
Answer:
Number of moles in 20.5 grams of calcium (Ca) = 0.5 moles (Approx.)
Explanation:
Given:
Amount of calcium (Ca) = 20.5 grams
Find:
Number of moles in 20.5 grams of calcium (Ca)
Computation:
Number of moles = Gram weight / Atomic weight of substance
We know that, Atomic weight of calcium (Ca) is 40.078 u
Number of moles in 20.5 grams of calcium (Ca) = Amount of calcium (Ca) / Atomic weight of calcium (Ca)
Number of moles in 20.5 grams of calcium (Ca) = 20.5 / 40.078
Number of moles in 20.5 grams of calcium (Ca) = 0.511
Number of moles in 20.5 grams of calcium (Ca) = 0.5 moles (Approx.)
Calculate the osmotic pressure of 5 % glucose solution and the osmotic pressure of 0.2 %, 0.9 % and 10 % sodium chloride solutions on the base of Van’t Hoff’s law (d = 1.1 g/ml for 10 % NaCl).
Based on Van't Hoff's law, the osmotic pressure of 5% glucose solution with 0.2%, 0.9%, and 10% sodium chloride solutions is 0821 liter atm K1mol1).
What is the osmotic pressure Van t Hoff law?Boyle, Van't Hoff The rule of solution: In a delute solution, the osmotic pressure () is directly proportional to the molar concentration (C) or inversely proportional to the volume (V) of the solution at constant temperature. Reason: C but C = Vn.
What does class 12 osmotic pressure formula mean?Pi=iMRT is the formula for osmotic pressure. The osmotic pressure increases with a solution's concentration (M) or temperature (T).
To know more about osmotic pressure visit:-
https://brainly.com/question/29819107
#SPJ1
Which temperature would be most appropriate on a hot summer day: 0 Degrees Celsius, 35 Degrees Celsius, or 90 Degrees Celsius?
Which temperature would be most appropriate as a room temperature: -20 Degrees Celsius, 0 Degrees Celsius, or 20 Degrees Celsius?
A block of aluminum has a volume of 15mL and a mass of 45g. In this example what is aluminum's density?
A rectangular block of gold has a mass of 80g. The dimensions of the block are 2cm by 5cm by 4cm. From this information, calculate the density.
Answer:
1. For a hot summer day, 35 degrees Celsius is most appropriate.
2. For room temperature, 20 degrees Celsius is most appropriate.
3. Aluminum's density is found by dividing mass by volume. 45 / 15 = 3 g/mL. The density is 3 g/mL.
4. Volume is found by multiplying length x width x height. 2cm x 5cm x 4cm equals 40 cm. We then divide the mass by volume to find density. 80 / 40 = 2 g/cm³. The density is 2 g/cm³.
. A 300 kg Blue car is moving rightward at 3 m/s, about to collide with a 100 kg Red car. Adjust the
velocity of the Red car so that the total momentum of the system is 800 kg m/s. (Adjust the velocity
of the Red car so that the sum of the momentum of the Blue car and the momentum of the Red car
equal 800 kg m/s.) What happened?
Answer:
The velocity of the red car is 1 m/s.
Explanation:
Given that,
The mass of blue car, m₁ = 300 kg
The mass of red car, m₂ = 100 kg
The velocity of Blue car, v₁ = 300 kg
The total momentum of the system, p = 800 kg-m/s
The momentum of an object is given by :
p = mv
So,
[tex]m_1v_1+m_2v_2=p[/tex]
Where
v₂ is the velocity of red car. So,
[tex]v_2=\dfrac{p-m_1v_1}{m_2}\\\\v_2=\dfrac{800-300\times 3}{100}\\\\v_2=-1\ m/s[/tex]
So, the velocity of the red car is 1 m/s.
A GC analysis of a oil containing the unknown diene produced a chromatogram with 3 distinct peaks. From the determination of peak area, you find that the percent compositions represented by the peaks are: peak A is 26.66 percent, peak B is 60 percent, and peak C is 13.33 percent. If the largest peak in the chromatogram corresponds to the diene, how many moles of diene are in the crude oil
Answer:
0.011 moles of diene are in the crude oil
Explanation:
The mass of the oil is 2.5g and the M.W. of the diene is 136g/mol
The largest peak is the peak that has the higher percent concentration: That is the peak B with 60% by mass.
Knowing this we can find the mass of the diene using its percentage and with the mass and the molecular weight we can find its moles:
Mass Diene:
2.5g Oil * (60g Diene / 100g Oil) = 1.5g Diene are in the oil
Moles:
1.5g Diene * (1mol / 136g) =
0.011 moles of diene are in the crude oilHow many atoms of oxygen (o)are present 2naOH+H2SO4 2H2O+Na2SO4
Answer:
10
Explanation:
No Constant Variable
A 2.00L sample of gas at STP is heated to 500K and compressed to 200 kPa. What is
the new volume of the gas?
I’ll give you all my points
The new volume of the gas will be 1.85L.
The three gas laws are what?According to Boyle's Law, as pressure lowers, gas volume grows. According to Charles' Law, when the temperature rises, the volume of the gas also rises. Avogadro's Law also states that as the amount of gas increases, so does the volume of the gas.
Given, initial volume of gas V1 = 2L
initial temp T1 = 273K
initial pressure P1 = 101.3 kPa
final temperature, T2 = 500K
Final pressure, P2 = 200 kPa
let final or new volume be V,
now for a constant moles of gas,
by using ideal gas equation,
P1×V1/T1 = P2×V/T2
101.3×2/273 = 200×V/500
202.6/273 = 2V/5
V = 0.742×5/2
V = 1.85 L
The new volume of the gas will be 1.85L.
To know more about Gas laws visit
https://brainly.com/question/12669509
#SPJ1
Average Volume of A Drop. 15 Drops for 1 ML
Note that if the water volume (ML) in a graduated cylinder is 30.0 and the volume of a drop of water is 1.00 and the number of drops is 15, the average drop volume (ML) is 2.0 mL.
What is average drop volume?Average drop volume is a measurement of a droplet's average volume. It is employed in a wide range of applications, including laboratory experimentation, medical research, and medication delivery systems.
It aids in deciding the proper amount of liquid to utilize in a certain condition. It also aids in the creation of novel pharmaceuticals and assuring exact and constant dosing in medical treatments.
You may calculate the average drop volume by dividing the total amount of water (30.0 mL) by the number of drops (15). That is to say:
(30.0 mL divided by 15 drops = 2.0 mL/drop)
Hence where the number of drops is 15mL and the volume of one drop is 1.00mL, the average Volume of a Drop is 2.0mL
Learn more about graduated cylinder:
https://brainly.com/question/14427988
#SPJ1
Which of the following statements describes
an exothermic reaction but not an endothermic
reaction?
A. Energy is destroyed during the reaction.
B.
Energy is used to form chemical bonds.
C. Energy is used to break chemical bonds.
D. Energy is released as heat during the reaction.
Answer:
Energy is released as heat during the reaction.
Answer:
D. Energy is released as heat during the reaction.
Explanation: