The molality of dichloromethane in this solution is 6.25 m.
The molality of dichloromethane in a solution of dichloromethane and 2-pentanone is calculated using the formula:
molality (m) = moles of solute (mol) / kilograms of solvent (kg)
In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-pentanone (CH₃COC₃H₇). The mole fraction of dichloromethane is 0.350, so there are 0.350 moles of dichloromethane in one mole of the solution.
To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-pentanone (CH₃COC₃H₇), is the sum of the atomic weights of each element, which is 86.13 g/mol. One mole of the solution contains 0.350 moles of dichloromethane and 0.650 moles 2-pentanone. Therefore, the mass of 2-pentanone is:
mass = moles x molar mass = 0.650 moles x 86.13 g/mol = 55.9845 g
Solving for the molality, we get:
m = 0.350 moles / (5.9845 g)(1 kg/1000g)
m = 6.25 mol/kg = 6.25 m
Learn more about molality here: https://brainly.com/question/24065939.
#SPJ11
in terms of the kinetic molecular theory, in what ways are liquids similar to gases? in what ways are liquids different from gases?
Liquids and gases have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.
Liquids and gases are both physical states of matter and are similar in many ways according to the Kinetic Molecular Theory.
Both states of matter consist of particles that are in constant motion, and this motion is caused by the energy of these particles.
The particles in both liquids and gases have enough energy to move around freely and have very weak forces of attraction between them.
This means that they are both very fluid, and they can take the shape of their containers.
Despite these similarities, liquids and gases also differ in some important ways.
Gas particles have much more kinetic energy than liquid particles, which allows them to move faster and farther apart, making them less dense than liquids.
In addition, the forces of attraction between gas particles are weaker than those between liquid particles, so gas particles are more easily separated and spread out in their environment.
Finally, the viscosity of liquids is greater than the viscosity of gases, so liquids are more resistant to flow.
In conclusion, liquids and gases have many similarities in terms of the Kinetic Molecular Theory. However, they also have some key differences, such as their density, the strength of their forces of attraction, and their viscosity.
to know more about liquid refer here:
https://brainly.com/question/9716973#
#SPJ11
How many moles are 1.20 x 10^25 atoms of phosphorus
Answer: 19.969 moles
Explanation: A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs. Chemists have to measure using moles for very small things like atoms, molecules, or other particles.
solids, liquids, and gases all have kinetic energy due to motion of their atoms or molecules. which form of molecular motion do liquids experience? select all that apply. a. translational b. vibrational c. rotational d. transitional
Translational, rotational and transitional are the form of molecular motion that liquids experience. Therefore, the correct options are option A, C and D.
The only thing that constitutes molecular motion is the movement of its component parts in a certain plane. Temperature has an impact on how much the constituent particles move. The average kinetic energy of the molecules is also measured by the temperature. Heat is another factor that affects molecular mobility since it gives molecules more kinetic energy. Molecules in a liquid are continually moving. When the container is tilted, particles travel to the left and downward due to the pull of gravity, and the gaps are filled by numerous more molecules. The result is a general outflow of liquid from the vessel. Translational, rotational and transitional are the form of molecular motion that liquids experience.
Therefore, the correct options are option A, C and D.
To know more about molecular motion, here:
https://brainly.com/question/14240663
#SPJ12
if a sample containing 6.5 moles of nh3 is reacted with excess cuo, how many moles of each product can be made? n2
The amount of N2 (Nitrogen) produced will be limited by the amount of NH3 (Ammonia) present. Thus, the maximum amount of N2 that can be produced is 1.625 moles (which is half of the 3.25 moles calculated above). Therefore, the answer is 1.625 moles of N2.
If a sample containing 6.5 moles of NH3 is reacted with excess CuO, 1.625 moles of N2 can be produced. There are two products that can be produced by the reaction of NH3 with excess CuO: N2 and H2O. The balanced equation for this reaction is as follows: 4NH3 + 3CuO → 2N2 + 3H2O + 3CuTo determine how many moles of each product can be made, we need to use the mole ratio between NH3 and the products. From the balanced equation, we can see that for every 4 moles of NH3, 2 moles of N2 can be produced. Therefore, for 6.5 moles of NH3, we can calculate the amount of N2 produced as follows:6.5 moles NH3 × (2 moles N2/4 moles NH3) = 3.25 moles N2However, we have to remember that the reaction is carried out with excess CuO. This means that all of the NH3 will be consumed, and there will be enough CuO (Copper oxide) to react with all of it. Therefore, the amount of N2 produced will be limited by the amount of NH3 present. Thus, the maximum amount of N2 that can be produced is 1.625 moles (which is half of the 3.25 moles calculated above). Therefore, the answer is 1.625 moles of N2.
For more such questions on Moles
https://brainly.com/question/14485544
#SPJ11
HELP PLEASE!!
I need help with these questions! Thank you! :D
We need 10 ml of 1 M MgSO₄ to react with 100 ml of 0.1 M Na₂CO₃ and use up both reactants without either being left over.
The scientists produced 3.2 moles (1.93 x 10²⁴ molecules) of NaCl from the reaction of 2Na + Cl₂ ---> 2NaCl by adding 3.2 moles of Cl2 to Na.
What is stoichiometry?Stoichiometry is a branch of chemistry that deals with the quantitative relationships between the reactants and products in a chemical reaction. It involves using the balanced chemical equation to determine the ratio of the amounts of reactants and products involved in a chemical reaction.
1. According to the balanced chemical equation:
MgSO₄ + Na₂CO₃ -> MgCO₃ + Na₂SO₄
The stoichiometric ratio of MgSO₄ to Na₂CO₃ is 1:1. This means that for every 1 mole of MgSO₄, 1 mole of Na₂CO₃ is required for complete reaction.
Given that we have 100 ml of 0.1 M Na₂CO₃ solution, we can calculate the number of moles of Na₂CO₃:
0.1 M = 0.1 moles/L
0.1 moles/L * 0.1 L = 0.01 moles of Na₂CO₃
To use up all the Na₂CO₃, we need 0.01 moles of MgSO4. We can use the formula conc * volume = moles to calculate the volume of 1 M MgSO4 required:
1 M = 1 mole/L
1 mole/L * 0.01 moles = 0.01 L or 10 ml
2. According to the balanced chemical equation, 2 moles of Na react with 1 mole of Cl₂ to produce 2 moles of NaCl. Therefore, we can find the number of moles of NaCl produced by calculating the limiting reactant, which is the reactant that gets consumed completely and determines the amount of product that can be formed.
The molar ratio of Na to Cl2 in the reaction is 2:1. This means that 1.6 moles of Na was used (since 3.2 moles of Cl2 was added) and that will be the limiting reactant.
Therefore, the number of moles of NaCl produced will be twice the number of moles of Na used. So,
Number of moles of NaCl produced = 2 x 1.6 = 3.2 moles
Since 1 mole of any substance contains Avogadro's number (6.022 x 10²³) of molecules, we can find the number of molecules of NaCl produced by multiplying the number of moles by Avogadro's number:
Number of molecules of NaCl produced = 3.2 x 6.022 x 10²³ = 1.93 x 10²⁴ molecules.
To know more about limiting reactant, visit:
https://brainly.com/question/14225536
#SPJ1
if 100 j of heat was appled to a 50g cube of each material, which metal would experince the greatest temperature change?
Copper would experience the greatest temperature change.
Copper has the lowest specific heat capacity of the metals, meaning it can absorb the most heat before its temperature increases. As a result, copper will experience the greatest temperature change when 100 j of heat is applied to a 50g cube.
Specific heat capacity is defined as the amount of energy, in joules, needed to raise the temperature of 1 gram of a substance 1 degree Celsius (C). The specific heat capacity of copper is 0.385 j/g*C, while that of aluminum is 0.903 j/g*C and that of iron is 0.444 j/g*C. Since copper has the lowest specific heat capacity of these metals, it is able to absorb more energy than the other metals.
For example, when 100 j of heat is applied to a 50g cube of each metal, the temperature increase for copper would be approximately 0.77 degrees Celsius, the temperature increase for aluminum would be approximately 0.45 degrees Celsius, and the temperature increase for iron would be approximately 0.22 degrees Celsius.
So, copper would experience the greatest temperature change.
Therefore, the metal that would experience the greatest temperature change when 100 j of heat is applied to a 50g cube is copper.
To know more about copper, refer here:
https://brainly.com/question/13677872#
#SPJ11
write the equilibrium equation established in a saturated potassium chloride, kcl, solution. equilibrium reaction:
The equilibrium equation for the dissolution of potassium chloride (KCl) in water can be represented as:
KCl(s) ⇌ K+(aq) + Cl-(aq)
What is Equilibrium?
In chemistry, equilibrium refers to the state of a chemical reaction where the concentrations of reactants and products no longer change with time. At this stage, the forward and reverse reactions occur at the same rate, resulting in no net change in the concentrations of reactants and products. It is denoted by a double arrow (⇌) between the reactants and products in a chemical equation. The equilibrium point is reached when the rate of the forward reaction equals the rate of the reverse reaction. The equilibrium constant, Keq, is a quantitative measure of the equilibrium concentration of reactants and products.
In this equation, KCl is the solid salt, and the arrow indicates the reversible reaction between the solid and its constituent ions in the aqueous solution. The dissociation of KCl in water results in the formation of potassium ions (K+) and chloride ions (Cl-) in the solution. When the rate of the forward reaction is equal to the rate of the reverse reaction, the solution is said to be in a state of dynamic equilibrium. In a saturated solution of KCl, the concentration of the dissolved ions is at its maximum value at equilibrium, and the undissolved solid salt is in equilibrium with its dissolved ions.
Learn more about Equilibrium from given link
https://brainly.com/question/517289
#SPJ1
what mass of water (in grams) forms from the reaction of 2.30 l of hydrogen gas and 1.86 l of oxygen gas? both gases are at 700 torr and 11.1 oc.
The mass of water that forms from the reaction of 2.30 L of hydrogen gas and 1.86 L of oxygen gas at 700 torrs and 11.1°C is: 7.56g.
What is the chemical reaction between hydrogen and oxygen?Hydrogen and oxygen react to form water. The balanced equation for the reaction is: 2H₂ + O₂ → 2H₂ O
What is the molar volume of an ideal gas at standard conditions?The molar volume of an ideal gas at standard conditions (0°C and 1 atm) is 22.4 L.
How do you convert from volume to moles?PV = nRT is the formula for finding the number of moles (n) of a gas. PV = nRT can be rearranged to n = PV/RT.
How to calculate the mass of a substance?The following equation can be used to calculate the mass of a substance: mass = moles × molar mass
What is the molar mass of water?The molar mass of water is 18.01528 g/mol.
Calculations:Step 1: Convert the given volumes of hydrogen gas and oxygen gas to moles.
n(H₂) = (700 torr × 2.30 L)/(760 torr/L) × (284.3 K/284.3 K) = 0.210 moles of H₂n
(O₂) = (700 torr × 1.86 L)/(760 torr/L) × (284.3 K/284.3 K) = 0.129 moles of O₂
Step 2: Use the balanced chemical equation to determine the mole ratio between hydrogen and water.
2H₂ + O₂ → 2H₂On(H₂O)
= 2 × n(H₂) = 0.420 moles of H₂O
Step 3: Use the molar mass of water to calculate the mass of water.
mass(H₂ O) = n(H₂ O) × molar mass(H₂ O)
mass(H₂ O) = 0.420 moles × 18.01528 g/mol = 7.56 g
Since we are given volumes in the problem, we must convert them to moles before proceeding with the calculation of the mass of water. Then, we use the balanced equation to determine the mole ratio between hydrogen and water, and finally, use the molar mass of water to calculate the mass of water that forms. The mass of water that forms are 7.56 g.
To know more about hydrogen refer here:
https://brainly.com/question/28937951#
#SPJ11
a 67.0 ml aliquot of a 0.600 m stock solution must be diluted to 0.100 m. assuming the volumes are additive, how much water should be added?
To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, 402.0 ml of water must be added.
To dilute a 67.0 ml aliquot of a 0.600 m stock solution to 0.100 m, the amount of water to be added can be calculated using the formula: M1V1 = M2V2.
M1 = 0.600 m, V1 = 67.0 ml, M2 = 0.100 m, V2 = Unknown
V2 = (M1V1) / M2
V2 = (0.600 x 67.0) / 0.100
V2 = 402.0
When a stock solution is diluted, it is mixed with a solvent such as water. The amount of solvent (in this case, water) to be added can be calculated using the above formula.
The initial volume (V1) and the concentration (M1) of the stock solution are known, while the final concentration (M2) and the final volume (V2) are unknown.
The formula can be used to calculate the amount of solvent to be added in order to reach the desired concentration.
The initial volume of the stock solution was 67.0 ml, and the initial concentration was 0.600 m. The desired concentration was 0.100 m.
When the formula was used, it was found that 402.0 ml of water must be added in order to reach the desired concentration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
Which of the following reactions take place more rapidly when the concentration of the nucleophile is increased? Check all that apply. Br CH3 + Br CH OT H. Br + CH3o +Br
The reactions that take place more rapidly when the concentration of the nucleophile is increased are:
Br- + CH3Br
CH3O- + CH3Br
Nucleophiles are electron-rich species that tend to attack electron-deficient atoms or molecules. In both reactions, the nucleophiles are Br- and CH3O-. When the concentration of the nucleophile is increased, the probability of a collision between the nucleophile and the substrate (CH3Br or CH3OTs) also increases, leading to a higher reaction rate.
In the first reaction, Br- attacks CH3Br, which is a primary alkyl halide. Primary alkyl halides are known to undergo SN2 (substitution nucleophilic bimolecular) reactions, where the nucleophile attacks the carbon atom bearing the leaving group (in this case, the bromine atom) in a concerted mechanism, resulting in inversion of the stereochemistry at the carbon center. SN2 reactions are known to be highly dependent on the concentration of the nucleophile, and increasing its concentration will increase the reaction rate.
In the second reaction, CH3O- attacks CH3OTs, which is a primary tosylate. Tosylates are also known to undergo SN2 reactions, similar to alkyl halides. Hence, the same reasoning applies here, and increasing the concentration of the nucleophile will increase the reaction rate.
In summary, both reactions that involve primary substrates (CH3Br and CH3OTs) will take place more rapidly when the concentration of the nucleophile is increased.
For more similar questions on "nucleophile"
brainly.com/question/30333156
#SPJ11
if two surface water types with the same density but different salinities and temperatures mix, the resulting water will be .
If two surface water types with the same density but different salinities and temperatures mix, the resulting water will be denser than both the surface water types.
Areas under warm and high salinity surface water with an appreciable depth, the temperature and salinity decreases with depth and internal vertical mixing processes occur despite stability of the water column. Eventually, this phenomenon is caused by the ability of the sea water to lose or gain heat by conduction and loss or gain of salt takes place by diffusion. This causes the density of the moving water to change directions.
Salt water mixes over limited depths and forms homogenous layers.
To know more about surface water here
https://brainly.com/question/25147725
#SPJ4
Fetal death that occurs after the fetus has reached a certain growth that is too large to resorb into the uterus is which one of the following?A. Spalding signB. Nonimmune hydropsC. Fetus papyraceousD. Stuck twin
The fetal death that occurs after the fetus has reached a certain growth that is too large to resorb into the uterus is known as fetus papyraceous.
The fetus is compressed and flattened due to the pressure of the adjacent growing fetus or maternal tissue. The fetus is partially or completely desiccated and flattened, leaving only a parchment-like, thin, and papery skin layer covering the soft tissues.
What is Fetus papyraceous?Fetus papyraceous refers to a dead fetus that has become mummified and flattened into a parchment-like membrane because of compression by an adjacent living fetus or maternal tissue after the death of the other fetus. It is a rare form of fetal death that occurs in multifetal gestations.
To learn more about fetal development refer: https://brainly.com/question/23323442
#SPJ11
which of the following substances would undergo dissociation when placed into a polar solvent? question 1 options: c6h12o6 h2o2 mgcl2 co2
The substance that would undergo dissociation when placed into a polar solvent is option C which is MgCl2.
Dissociation explained.
Dissociation refers to the separation of a molecule or compound into smaller particles, such as ions or radicals, usually in a solvent or under the influence of a certain energy input, such as heat or light.
In the context of chemistry, dissociation often refers to the separation of an ionic compound into its constituent ions in a solvent, such as water
MgCl2 is an ionic compound that consists of Mg2+ cations and Cl- anions. When this compound is placed in a polar solvent, such as water, the polar water molecules surround the ions and separate them from one another, resulting in the dissociation of the compound into its constituent ions.
Therefore, other substances listed, C6H12O6 (glucose), H2O2 (hydrogen peroxide), and CO2 (carbon dioxide), are not ionic compounds and do not dissociate into ions when placed in a polar solvent. Glucose and hydrogen peroxide are polar molecules, but they do not ionize in water. Carbon dioxide is a nonpolar molecule and is insoluble in water.
Learn more about dissociation below.
https://brainly.com/question/305470
#SPJ1
calculate the molar concentration of acetaminophen in a solution with 0.083 g of acetaminophen in 150 ml of buffer solution.
The given amount of acetaminophen in a solution is 0.083 g in 150 ml of buffer solution. To calculate the molar concentration of acetaminophen in the given solution, we need to first find the number of moles of acetaminophen present in the given solution.
SGiven,Mass of acetaminophen (m) = 0.083 gVolume of solution (V) = 150 mL = 0.15 LTo find,Molarity of acetaminophen (M) = ?First, calculate the number of moles of acetaminophen present in the given solution using the formula, moles = mass / molar mass of acetaminophenMolar mass of acetaminophen = 151 g/molNumber of moles of acetaminophen present = 0.083 g / 151 g/mol = 0.00055 mol
Now, calculate the molar concentration of acetaminophen in the given solution using the formula,molarity = moles / volumeMolarity of acetaminophen = 0.00055 mol / 0.15 L= 0.00367 MTherefore, the molar concentration of acetaminophen in the given solution is 0.00367 M.
To know more about moles click on below link :
https://brainly.com/question/20486415#
#SPJ11
which physical method can separate a mixture of steel ball bearings and marbles?boilingevaporationfiltrationsorting
The physical method that can separate a mixture of steel ball bearings and marbles is sorting.
The process of separating the components of a mixture is referred to as separation. A mixture of steel ball bearings and marbles can be separated using the sorting method. .Sorting is a process of separating components of a mixture by hand.
Steel ball bearings and marbles can be sorted based on their appearance, size, and weight. The process of sorting is the simplest method of separation that does not require any special tools or equipment. Hence, the physical method that can separate a mixture of steel ball bearings and marbles is sorting.
Know more about Separation here:
https://brainly.com/question/29947198
#SPJ11
Answer:
It’s D sorting
Explanation:
I got it correct duh
in which labeled portion of the curve would you use the heat of vaporization to calculate the heat absorbed?
Answer: To calculate the heat absorbed using the heat of vaporization, you would use the portion of the curve labeled "Evaporation."
What is Heat of Vaporization?Heat of vaporization is the energy required to transform a liquid into a vapor at a constant temperature, and it is expressed in joules per mole. Heat of vaporization is also known as enthalpy of vaporization, and it is a function of the substance's properties, temperature, and pressure.
The enthalpy of vaporization, like other thermodynamic properties, is often displayed as a function of temperature in a phase diagram, which shows the physical conditions (pressure, temperature, volume, etc.) at which different phases of a substance are stable. The temperature at which the vaporization process occurs is the boiling point.
The boiling point is the temperature at which the vapor pressure equals the external pressure, allowing bubbles of vapor to form within the liquid. During the process, heat is consumed to transform a liquid into a vapor, which is the heat of vaporization.
Learn more about Heat of Vaporization here:
https://brainly.com/question/30603212#
#SPJ11
in which situations is there a point to the left of the particles where an electron will be in equilibrium?
Equilibrium points can occur in a wide variety of systems, such as gravitational systems, electric systems, and fluid dynamics systems. The specific conditions required for an equilibrium point to exist will depend on the specific system being considered.
An equilibrium point is a point in a system where the net force acting on an object is zero, and thus the object remains stationary. In the context of particles, an equilibrium point may refer to the point in space where the net force on a particle is zero.
Whether there is a point to the left of the particles where an electron will be in equilibrium depends on the specific system under consideration. For example, in a system with a charged particle and a nearby charged object.
there may be points where the electric field from the charged object and the electric field from the charged particle balance each other, resulting in an equilibrium point where an electron would be stationary.
To know more about equilibrium:
https://brainly.com/question/28899790
#SPJ4
158 ml of a 0.148m nacl solution is added to 228 ml of a 0.369m nh4no3 solution. the concentration of ammonium ions in the resulting mixture is
The concentration of ammonium ions in the resulting mixture is 0.104 M.
The number of moles of NaCl that is added to the solution. Convert the volume of NaCl solution into liters:158 mL × (1 L/1000 mL) = 0.158 L
Calculate the number of moles of NaCl using the formula: moles = concentration × volumeMoles of NaCl = 0.148 mol/L × 0.158 L = 0.0234 moles
Repeat the above process for ammonium nitrate. 228 mL × (1 L/1000 mL) = 0.228 L0.369 mol/L × 0.228 L = 0.0841 moles of ammonium nitrate
The number of moles of ammonium ions that is produced by 0.0841 moles of ammonium nitrate.NH4NO3(s) → NH4+(aq) + NO3-(aq)Mole ratio between NH4NO3 and NH4+ = 1:1
Therefore, moles of NH4+ = moles of NH4NO3 = 0.0841 molesStep 4: Determine the final volume of the solution.Vfinal = VNaCl + VNH4NO3Vfinal = 0.158 L + 0.228 L = 0.386 L
The concentration of ammonium ions using the formula: moles/volumeConcentration of ammonium ions = 0.0841 moles/0.386 L = 0.2179 moles/L
Concentration of ammonium ions in the resulting mixture = 0.2179 mol/L = 0.104 M. Therefore, the concentration of ammonium ions in the resulting mixture is 0.104 M.
to know more about ammonium refer here:
https://brainly.com/question/10834028#
#SPJ11
a diatomic molecule contains i. atoms of two different elements bonded together with a covalent bond. ii. two atoms of the same element bonded together with a covalent bond. iii. two lone pairs of electrons.
A diatomic molecule consists of two atoms of the same element or two atoms of different elements, bonded together with a covalent bond, or in some cases, two lone pairs of electrons. So all statements are true.
A diatomic molecule is a molecule made up of two atoms of the same element or two atoms of different elements bonded together. The bonding of the atoms is usually done through a covalent bond, meaning that electrons are shared between the two atoms in order to create a stable arrangement. In the case of two atoms of different elements, each atom has a different electronegativity, resulting in the formation of a polar covalent bond. This means that the electrons will be pulled closer to one atom than the other, resulting in an overall dipole moment for the molecule. In the case of two atoms of the same element, a nonpolar covalent bond is formed. This means that the electrons are shared equally between the two atoms and no dipole moment is formed. In some cases, two lone pairs of electrons may be present instead of a covalent bond. This results in a molecule with a larger overall dipole moment.
Learn more about diatomic molecule: https://brainly.com/question/30595473
#SPJ11
what is the molarity of an ca(oh)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution
The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.
Molarity is a way to measure the concentration of a solution. It is defined as the number of moles of a substance in a liter of solution. The formula for calculating molarity is:
Molarity = moles of solute / liters of solution
The molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solutionroxide (OH-) in the solution. The molar mass of hydroxide is 17.01 g/mol, so:
moles of OH- = mass of OH- / molar mass of OH-
moles of OH- = 15.6 g / 17.01 g/mol
moles of OH- = 0.916 moles
2. The volume of solution:
L = ml / 1000
L = 105.0 ml / 1000
L = 0.105 L
3. The molarity of the solution :
Molarity = moles of solute / liters of solution
Molarity = 0.916 moles / 0.105 L
Molarity = 8.72 M
Therefore, the molarity of a Ca(OH)2 solution that contains 15.6 g of hydroxide in 105.0 ml of solution is 8.72 M.
to know more about molarity refer here:
https://brainly.com/question/8732513#
#SPJ11
why makes a metal ion have delocalised electrons
Answer:
Explanation:
Having more electron shells means that the valence electrons are farther from the nucleus and 'feel' less attraction to the protons. This is why metals are more able to lose their electrons in ionic bonds and delocalize their electrons in metallic bonds, since they don't have as strong of a pull on them as non-metals.
according to the procedure determination of nahco3, what are two applications for mixtures of n a h c o 3 ?
Mixtures of NaHCO₃ have a variety of applications. Two common uses are as a leavening agent in baking and as an electrolyte in certain sports drinks.
What are the applications of NaHCO₃?NaHCO₃ also serves as an electrolyte in some sports drinks, which helps to replace minerals lost in sweat during exercise. The electrolyte also helps to regulate fluid balance and muscle contraction.
According to the procedure determination of NaHCO₃, two applications for mixtures of NaHCO₃ are given below: Applications of mixtures of NaHCO₃: Baking soda or NaHCO₃ is a compound that is widely used in the food industry. It is primarily used in the following ways: As a raising agent. As a component of various dry mixtures.
As a treatment for pH-related issues in food items. Acid reflux can be relieved by mixing baking soda and water. Baking soda helps to neutralize the stomach's acidic content, preventing it from causing harm. The following is an example of how to use baking soda for acid reflux: Ingredients: A glass of water A tablespoon of baking soda
Instructions: Add a tablespoon of baking soda to a glass of water.
Read more about the electrolyte here:
https://brainly.in/question/1159049
#SPJ11
a bronsted-lowry acid is a proton _____ and must therefore contain at least one ionizable _____ atom in its formula.
The complete statement is a Bronsted-Lowry acid is a proton donor and must therefore contain at least one ionizable hydrogen atom in its formula.
According to Bronsted-Lowry theory, an acid is a substance that donates a proton (H+ ion) and a base is a substance that accepts a proton (H+ ion). In other words, an acid is a proton donor and a base is a proton acceptor.
Bronsted-Lowry acid must contain at least one ionizable hydrogen atom in its formula so that it can donate a proton to another species or substance during a chemical reaction.
This means that an acid is defined by its ability to donate a proton (H+ ion) to another substance in a chemical reaction, and this is possible only if it contains at least one ionizable hydrogen atom in its formula.
learn more about Bronsted-Lowry theory here:
https://brainly.com/question/30460067
#SPJ11
what is the balanced form of equation for Sodium plus chlorine equals to sodium chloride
Answer:
Na (s) + Cl2 (g) → NaCl (s)
Explanation:
A reaction of sodium with chlorine to produce sodium chloride is an example of a combination reaction. 2 Na + Cl 2 → 2 NaCl.
a perchloric acid solution has a ph of 3.158. what is the concentration of perchlorate ion in this solution?
The concentration of perchlorate ion in the solution that has a ph of 3.158 is 7.9 × 10−4 M.
Perchloric acid has the chemical formula HClO4. When it dissolves in water, it completely dissociates into H+ ions and ClO4- ions. The pH of a solution is defined as the negative logarithm of the hydrogen ion concentration [H+].A perchloric acid solution with a pH of 3.158 has an [H+] of 7.9 × 10−4 M, according to the following formula:
pH = −log [H+]
The concentration of the perchlorate ion [ClO4-] can be calculated using the following formula:
Kw = [H+][OH-] = 1 × 10-14 = [H+]2[H+] = 1 × 10-14[H+] = √(1 × 10-14) = 1 × 10-7M[OH-] = Kw/[H+] = (1 × 10-14) / (1 × 10-7) = 1 × 10-7M
The concentration of ClO4- is equal to the concentration of H+ because they are present in equal amounts as a result of complete dissociation of perchloric acid: [ClO4-] = [H+] = 7.9 × 10−4 M.
More on Perchloric acid: https://brainly.com/question/29089251
#SPJ11
ammonia, nh3, is a common ingredient in many household cleaning agents. if a cleaning agent contains 4.03 mol nh3, how many grams of nh3 are in the cleaning agent?
[tex]NH_{3}[/tex] has a molar mass of 17 g/mol, so 4.03 moles of [tex]NH_{3}[/tex] would contain 68.51 grams of the compound. Therefore, a cleaning agent containing 4.03 moles of [tex]NH_{3}[/tex] would contain 68.51 grams of the compound.
The given compound is ammonia [tex]NH_{3}[/tex]. [tex]NH_{3}[/tex] is present in a lot of cleaning agents in homes, which makes it an extremely useful compound. It can help to remove stains and dirt from a variety of surfaces. We need to calculate the mass of the ammonia present in the cleaning agent. Here, we have been given that the amount of [tex]NH_{3}[/tex] in the cleaning agent is 4.03 mol.
We can use the molar mass of [tex]NH_{3}[/tex] to convert this into its mass. Molar mass of [tex]NH_{3}[/tex] = 17 g/mol
Formula: Mass (m) = Number of moles (n) x Molar mass (M)
Substituting the values: Mass (m) = 4.03 mol x 17 g/mol = 68.51 g.
Therefore, the mass of [tex]NH_{3}[/tex]in the cleaning agent is 68.51 grams.
For more questions related to molar mass.
https://brainly.com/question/22997914
#SPJ11
the freezing-point depression for a given aqueous solution is 0.34 k. the freezing-point depression constant for water is 1.86 k/m. calculate the molality of solutes in the solution.
the molality of solutes in the aqueous solution is 0.182 molal.
Freezing-point depression constant for water ([tex]K_f[/tex]) = 1.86 K/mFreezing-point depression of aqueous solution (Δ[tex]T_f[/tex]) = 0.34 KThe molality of solute in the solution = ?The formula to calculate molality is as follows;m = moles of solute/kilograms of solvent.
⇒m = (molality) = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
Here, Δ[tex]T_f[/tex] = Freezing-point depression[tex]K_f[/tex] = Freezing-point depression constant for waterw2 = Mass of solvent (Water) in KgWe have to calculate the molality of solutes in the solution by using the freezing-point depression constant and freezing-point depression of the aqueous solution.
Now, Substituting the given values, we get,
⇒ m = (Δ[tex]T_f[/tex]) / ([tex]K_f[/tex] × w2)
⇒ m = 0.34 / (1.86 × w2)
⇒ m = 0.182 molal
Therefore, the molality of solutes in the solution is 0.182 molal.
Learn more about molality: https://brainly.com/question/1370684
#SPJ11
what must be true for precipitation to occur? group of answer choices qsp > ksp qsp < ksp precipitation always occurs with sparingly soluble compounds none of these
For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp).
Precipitation is the conversion of a dissolved substance into a solid, which then settles out of a solution. Precipitation occurs when a liquid solution is cooled or heated, causing it to become super-saturated with one or more solutes. A solution's super-saturation means that it contains more of a solute than it can contain at equilibrium.
A tiny seed crystal of the solute is added to the solution to kick off the precipitation. The seed crystal provides a template for the rest of the solute to nucleate and form a solid. For precipitation to occur, the value of Qsp (the ion product constant) should be greater than the solubility product constant (Ksp). When Qsp is greater than Ksp, the solution is supersaturated and precipitates are formed. If Qsp is less than Ksp, the solution is unsaturated and no precipitation occurs.
Learn more about solution at:
https://brainly.com/question/16159788
#SPJ11
what happens to the chloride concentration, if you add solid kcl to a solution that contains already saturated kcl?
When solid KCl is added to a solution that already contains saturated KCl, the chloride concentration will not change.
This is because the solid KCl is already in its maximum saturated concentration and cannot dissolve further. Therefore, it will not increase the chloride concentration of the solution.
When solid KCl is added to a solution that already contains saturated KCl, the solution is already saturated and the solid KCl cannot dissolve further. Therefore, adding solid KCl to the solution will not change the chloride concentration of the solution.
This is because the solid KCl is already in its maximum saturated concentration and adding more solid KCl will not further dissolve and increase the chloride concentration of the solution.
This is known as the law of maximum saturation which states that a solution can only contain the maximum concentration of the substance it can dissolve, and any additional material that is added to the solution will remain in its solid form.
Therefore, adding solid KCl to a solution that already contains saturated KCl will not affect the chloride concentration.
To know more about chloride concentration click on below link:
https://brainly.com/question/29730848#
#SPJ11
calculate the molar concentration of arsenic acid (h3aso4) in an unknown solution if 25.00 ml of that solution required 35.21 ml of 0.1894 m koh for neutralization.
The molar concentration of arsenic acid (H₃AsO₄) in an unknown solution is 0.1152 M.
To calculate this, we use the equation:
[H₃AsO₄] = (V₂ × C₂)/V₁
Where V₁ is the volume of the unknown solution (25.00 ml) and V₂ is the volume of KOH (35.21 ml). C₂ is the molar concentration of the KOH (0.1894 M).
By substituting the values into the equation, we get:
[H₃AsO₄] = (35.21 × 0.1894) / 25.00
[H₃AsO₄] = 0.1152 M
Therefore, the molar concentration of arsenic acid (H₃AsO₄) in the unknown solution is 0.1152 M.
To find the molar concentration of the arsenic acid (H₃AsO₄) in an unknown solution, we use the equation [H₃AsO₄] = (V₂ × C₂)/V₁.
In this equation, V₁ is the volume of the unknown solution, V₂ is the volume of KOH, and C₂ is the molar concentration of the KOH. By substituting the values, we get the molar concentration of arsenic acid (H₃AsO₄) in the unknown solution as 0.1152 M.
To know more about arsenic acid click on below link:
https://brainly.com/question/14451856#
#SPJ11