To determine the time required for one dollar's worth of energy to be conducted through the wall, we need additional information: the thermal conductivity of the concrete wall (k).
To determine the time required for one dollar's worth of energy to be conducted through the wall, we need to calculate the heat transfer rate through the wall and then divide the cost of one kilowatt hour by the heat transfer rate.
The heat transfer rate can be determined using the equation:
Q = k * A * (T2 - T1) / L
where Q is the heat transfer rate, k is the thermal conductivity of the wall, A is the area of the wall, T2 is the temperature at the inside surface, T1 is the temperature at the outside surface (ground temperature), and L is the thickness of the wall.
Once we have the heat transfer rate, we can divide the cost of one kilowatt hour (0.10 dollars) by the heat transfer rate to find the number of hours required for one dollar's worth of energy to be conducted through the wall.
Please note that the value of thermal conductivity (k) for the concrete wall is required to perform the calculation.
To know more about conductivity , click here:
brainly.com/question/31201773
#SPJ11
2. &. Light of wavelength 530 nm is sent through a diffraction grating to a screen at a distance of 3.82 m. On the screen, a first order fringe is noted to be 1.40 m from the central fringe. Find the distance between the lines on the grating. b. X-rays can be produced by bombarding a target with high energy electrons. What minimum accelerating voltage would be required to produce an X-ray with a wavelength of 0.450 nm?
a. To find the distance between the lines on the grating, we can use the formula for the position of the fringes in a diffraction grating.
The formula is given by d sinθ = mλ, where d is the distance between the lines on the grating, θ is the angle between the incident light and the normal to the grating, m is the order of the fringe, and λ is the wavelength of the light.
In this case, we are given the wavelength (530 nm) and the distance between the first order fringe and the central fringe (1.40 m). By rearranging the formula, we can solve for d.
b. To determine the minimum accelerating voltage required to produce an X-ray with a wavelength of 0.450 nm, we can use the equation for the energy of a photon, E = hc/λ, where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the X-ray.
Since the energy of a photon is given by the equation E = qV, where q is the charge of the electron and V is the accelerating voltage, we can equate the two equations and solve for V. By substituting the values of Planck's constant, the speed of light, and the desired wavelength, we can calculate the minimum accelerating voltage required.
Learn more about fringes here: brainly.com/question/31387359
#SPJ11
"A ball is thrown up with an initial velocity of 37 m/s. How many
seconds does it take the ball to reach the top of its trajectory?
Assume that the acceleration do to gravity is 10 m/s2.
It takes the ball approximately 3.7 seconds to reach the top of its trajectory.
To determine the time it takes for the ball to reach the top of its trajectory, we can use the equation of motion for vertical displacement under constant acceleration.
Initial velocity (u) = 37 m/s (upward)
Acceleration due to gravity (g) = -10 m/s² (downward)
The ball reaches the top of its trajectory when its final velocity (v) becomes zero. Therefore, we can use the equation:
v = u + gt
where:
v is the final velocity,
u is the initial velocity,
g is the acceleration due to gravity,
t is the time.
Plugging in the values:
0 = 37 m/s + (-10 m/s²)(t)
Rearranging the equation:
10t = 37
t = 37 / 10
t = 3.7 seconds.
Learn more about acceleration -
brainly.com/question/460763
#SPJ11
What is the electric potential energy of an arrangement of two
charges, -19.56 μC and -14.3 μC, separated by 27.73 cm?
The electric potential energy of the arrangement of two charges, -19.56 μC and -14.3 μC, separated by 27.73 cm, is approximately -8.45 millijoules.
The electric potential energy (PE) between two charges can be calculated using the equation PE = k * (Q1 * Q2) / r, where k is the electrostatic constant (k ≈ 9 × 10^9 N m²/C²), Q1 and Q2 are the charges, and r is the distance between them.
Given Q1 = -19.56 μC, Q2 = -14.3 μC, and r = 27.73 cm (0.2773 m), we can plug these values into the equation:
PE = (9 × 10^9 N m²/C²) * (-19.56 × 10^(-6) C) * (-14.3 × 10^(-6) C) / (0.2773 m)
Calculating this, we find:
PE ≈ -8.45 × 10^(-3) J
To convert this to millijoules, we multiply by 1000:
PE ≈ -8.45 mJ
Therefore, the electric potential energy of the arrangement of two charges, -19.56 μC and -14.3 μC, separated by 27.73 cm, is approximately -8.45 millijoules.
To learn more about potential energy, click here: https://brainly.com/question/24284560
#SPJ11
In
studying time-reversal symmetry we introduced anti-unitary
operators. Why is it necessary
The introduction of anti-unitary operators is necessary in studying time-reversal symmetry because they provide a mathematical framework to describe the reversal of time in physical systems.
Anti-unitary operators combine both unitary and complex conjugation operations, allowing for the transformation of quantum states and observables under time reversal.
Time-reversal symmetry implies that the laws of physics remain invariant under the reversal of time. However, certain physical quantities may undergo complex conjugation during this transformation.
Anti-unitary operators capture this complex conjugation aspect and ensure that the transformed states and observables properly reflect the time-reversed nature of the system.
By incorporating anti-unitary operators, we can mathematically describe the behavior of quantum systems under time reversal, analyze their symmetries, and derive important physical consequences related to time-reversal symmetry, such as conservation laws and selection rules.
Therefore, the introduction of anti-unitary operators is necessary to study and understand the fundamental properties of time-reversal symmetry in quantum mechanics.
Learn more about quantum mechanics from the given link:
https://brainly.com/question/23780112
#SPJ11
4. A 180-kmh wind blowing over the flat roof of a house causes the roof to lift off the house. If the house is 6.2 m 12.4 m in size, estimate the weight of the roof. Assume the roof is not nailed down. (Chapter 10)
The weight of the roof can be estimated by considering the force exerted by the wind and the size of the roof. The estimated weight of the roof lifted by the wind is approximately 900,050 N or 900 kN (kilonewtons).
To estimate the weight, we need to consider the force exerted by the wind on the roof. This force can be calculated using the formula
F = 0.5 * ρ * A * v^2, where F is the force, ρ is the air density, A is the area, and v is the velocity of the wind.
First, we convert the wind speed to m/s by dividing 180 km/h by 3.6 (1 km/h = 1000 m/3600 s). Next, we calculate the area of the roof by multiplying the length and width. With these values, along with the air density (which is approximately 1.2 kg/m³), we can calculate the force exerted by the wind.
The weight of the roof can be estimated as the force exerted by the wind. While the calculation may not provide the exact weight, it gives an estimate based on the given information and assumptions.
Learn more about weight here:
https://brainly.com/question/31659519
#SPJ11
A basketball leaves a player's hands at a height of 2.10 mm above the floor. The basket is 3.05 mm above the floor. The player likes to shoot the ball at a 40.0 ∘∘ angle.
If the shot is made from a horizontal distance of 8.30 mm and must be accurate to ±0.22m±0.22m (horizontally), what is the range of initial speeds allowed to make the basket?
The range of initial speeds allowed to make the basket is between v_min = sqrt(((x - Δx) * g) / sin(2θ)) and v_max = sqrt(((x + Δx) * g) / sin(2θ))
To find the range of initial speeds that will allow the basketball to make the basket, we can use the kinematic equations of projectile motion.
First, let's define the given values:
Initial vertical position (h₀) = 2.10 m
Height of the basket above the floor (h) = 3.05 m
Launch angle (θ) = 40.0 degrees
Horizontal distance to the basket (x) = 8.30 m
Accuracy tolerance (Δx) = ±0.22 m
The range of initial speeds can be calculated using the equation for horizontal distance:
x = (v₀^2 * sin(2θ)) / g
Rearranging the equation, we can solve for v₀:
v₀ = sqrt((x * g) / sin(2θ))
To find the range of initial speeds, we need to calculate the maximum and minimum values by adding and subtracting the tolerance:
v_max = sqrt(((x + Δx) * g) / sin(2θ))
v_min = sqrt(((x - Δx) * g) / sin(2θ))
Thus, the range of initial speeds allowed to make the basket is between v_min and v_max.
Learn more about speeds here:
https://brainly.com/question/13943409
#SPJ11
In a box defined by the potential the eigenenergies and eigenfunctions are Un (x) Va sin n. 2a for even n Un (x)=√√√/1/0 Cos 2a; for odd n A particle in the box is in a state (x) = N sin 2 [√6-4i sin 5+2 cos bra 67x (a) Determine the normalization constant (b) Calculate the probability of each eigenstate and write down the corresponding eigenenergy of each state with non-zero probability. (c) What is the expected average value of energy? V (x) = En = 0; a< x
A. Normalization constant N = (2/√3)
B. Eigenenergy of nth state = En = (n²π²ħ²)/2ma²
C. the expected average value of energy is (28π²ħ²)/(3ma²).
(a). In a box defined by the potential, the eigenenergies and eigenfunctions are:
Un(x) = Va sin(nπx/2a) for even n,
Un(x) = √(2/2a) cos(nπx/2a) for odd n.
A particle in the box is in a state:
ψ(x) = N sin^2(√6-4i sin(5x) + 2 cos(67x))
To calculate the normalization constant, use the following relation:
∫|ψ(x)|^2 dx = 1
Where ψ(x) = N sin^2(√6-4i sin(5x) + 2 cos(67x))
N is the normalization constant.
|N|^2 ∫sin^2(√6-4i sin(5x)+2 cos(67x)) dx = 1
∫[1-cos(2(√6-4i sin(5x)+2 cos(67x)))]dx = 1
∫1dx - ∫(cos(2(√6-4i sin(5x)+2 cos(67x)))) dx = 1
x - (1/2)(sin(2(√6-4i sin(5x)+2 cos(67x))))|√6-4i sin(5x)+2 cos(67x) = a| = x - (1/2)sin(2a)0 to 2a = 1
∫2a = x - (1/2)sin(2a) = 1
x = 1 + (1/2)sin(2a)
Since the wave function is symmetric, we only need to integrate over the range 0 to a.
Normalization constant N = (2/√3)
(b) The probability of each eigenstate is given by |cn|^2.
Where cn is the coefficient of the nth eigenfunction in the expansion of the wave function.
We have,
ψ(x) = N sin^2(√6-4i sin(5x)+2 cos(67x) = N[(1/√3)sin(2x) - (2/√6)sin(4x) + (1/√3)sin(6x)]
Comparing with the given form, we get,
c1 = (1/√3)
c2 = - (2/√6)
c3 = (1/√3)
Probability of nth eigenstate = |cn|^2
Therefore,
Probability of first eigenstate (n = 1) = |c1|^2 = (1/3)
Probability of second eigenstate (n = 2) = |c2|^2 = (2/3)
Probability of third eigenstate (n = 3) = |c3|^2 = (1/3)
Eigenenergy of nth state = En = (n²π²ħ²)/2ma²
For even n, Un(x) = √(2/2a) cos(nπx/2a)
∴ n = 2, 4, 6, ...
For odd n, Un(x) = Va sin(nπx/2a)
∴ n = 1, 3, 5, ...
(c) The expected average value of energy is given by,
∫ψ(x)V(x)ψ(x)dx = ∫|ψ(x)|²En dx
For V(x) = E0 = 0, a < x < a
We have,
En = (n²π²ħ²)/2ma²
En for even n = 2, 4, 6...
En for odd n = 1, 3, 5...
We have already calculated |ψ(x)|² and En.
∴ ∫|ψ(x)|²En dx = ∑|cn|²En
∫(1/√3)sin²(2x)dx - (2/√6)sin²(4x)dx + (1/√3)sin²(6x)dx
= [(2/3)(π²ħ²)/(2ma²)] + [(8/3)(π²ħ²)/(2ma²)] + [(18/3)(π²ħ²)/(2ma²)]
= [(2+8+18)π²ħ²]/[3(2ma²)]
= (28π²ħ²)/(3ma²)
Hence, the expected average value of energy is (28π²ħ²)/(3ma²).
To learn more about constant, refer below:
https://brainly.com/question/31730278
#SPJ11
A hawk is flying from the sky vertically toward a rabbit on the
ground with a velocity of 30m/s. It emits a screech at 3300 Hz to
scare the rabbit. What is the frequency heard by the rabbit? Assume
th
The frequency heard by the rabbit is higher than 3300 Hz.
As the hawk is flying towards the rabbit, the sound waves it produces will be compressed due to Doppler effect.
This means that the frequency of the sound waves heard by the rabbit will increase.
The formula for calculating the observed frequency due to Doppler effect is f' = f(v +/- vr) / (v +/- vs),
where f is the frequency emitted by the source, v is the speed of sound, vr is the velocity of the observer, and vs is the velocity of the source.
As the hawk is flying towards the rabbit with a velocity of 30 m/s, we can substitute vr as 30 m/s and vs as 0 (since the source is not moving away or towards the observer).
Plugging in the values, we get f' = 3304 Hz.
Therefore, the rabbit will hear a higher frequency of 3304 Hz.
Learn more about frequency from the given link:
https://brainly.com/question/29739263
#SPJ11
Consider a one-dimensional monatomic lattice. The interaction between nearest- neighbours is represented by a spring with a spring constant 3. Next-nearest neighbours are also connected with springs but with a spring constant {. Determine the dispersion relation w(k) for this lattice. (
w(k) = √(3 * cos^2(ka) + β * cos^2(2ka)). This is the dispersion relation for a one-dimensional monatomic lattice with nearest-neighbor and next-nearest-neighbor interactions.
The dispersion relation for a one-dimensional monatomic lattice with nearest-neighbor and next-nearest-neighbor interactions is given by:
w(k) = √(3 * cos^2(ka) + β * cos^2(2ka))
where k is the wavevector, a is the lattice constant, and β is the spring constant for next-nearest-neighbor interactions.
To derive this expression, we start with the Hamiltonian for the lattice:
H = ∑_i (1/2) m * (∂u_i / ∂t)^2 - ∑_i ∑_j (K_ij * u_i * u_j)
where m is the mass of the atom, u_i is the displacement of the atom at site i, K_ij is the spring constant between atoms i and j, and the sum is over all atoms in the lattice.
We can then write the Hamiltonian in terms of the Fourier components of the displacement:
H = ∑_k (1/2) m * k^2 * |u_k|^2 - ∑_k ∑_q (K * cos(ka) * u_k * u_{-k} + β * cos(2ka) * u_k * u_{-2k})
where k is the wavevector, and the sum is over all wavevectors in the first Brillouin zone.
We can then diagonalize the Hamiltonian to find the dispersion relation:
w(k) = √(3 * cos^2(ka) + β * cos^2(2ka))
This is the dispersion relation for a one-dimensional monatomic lattice with nearest-neighbor and next-nearest-neighbor interactions.
To learn more about dispersion relation click here
https://brainly.com/question/33357413
#SPJ11
Question 13 It turns out that -40'C is the same temperature as -40°F. Is there a temperature at which the Kelvin and Celsius scales agree? a yes, at O'C Ob yes, at OK yes at 273°C d No
Yes, there is a temperature at which the Kelvin and Celsius scales agree. the temperature at which the Kelvin and Celsius scales agree is at -273.15°C, which corresponds to 0 Kelvin.
The Kelvin scale is an absolute temperature scale, where 0 Kelvin (0 K) represents absolute zero, the point at which all molecular motion ceases. On the other hand, the Celsius scale is based on the properties of water, with 0 degrees Celsius (0°C) representing the freezing point of water and 100 degrees Celsius representing the boiling point of water at standard atmospheric pressure.
To find the temperature at which the Kelvin and Celsius scales agree, we need to find the temperature at which the Celsius value is numerically equal to the Kelvin value. This occurs when the temperature on the Celsius scale is -273.15°C.
The relationship between the Kelvin (K) and Celsius (°C) scales can be expressed as:
K = °C + 273.15
At -273.15°C, the Celsius value is numerically equal to the Kelvin value:
-273.15°C = -273.15 + 273.15 = 0 K
Therefore, at a temperature of -273.15°C, which is known as absolute zero, the Kelvin and Celsius scales agree.
At temperatures below absolute zero, the Kelvin scale continues to decrease, while the Celsius scale remains positive. This is because the Kelvin scale represents the absolute measure of temperature, while the Celsius scale is based on the properties of water. As such, the Kelvin scale is used in scientific and technical applications where absolute temperature is important, while the Celsius scale is commonly used for everyday temperature measurements.
In summary, This temperature, known as absolute zero, represents the point of complete absence of molecular motion.
Learn more about Celsius here:
brainly.com/question/14767047
#SPJ11
What is the pooled variance for the following two samples? sample 1: n = 8 and ss = 168; sample 2: n = 6 and ss = 120
The pooled variance is the weighted average of the variances of two or more groups, where the weights are the degrees of freedom (n-1) for each group.
To get the pooled variance for the given samples, we need to find the variance of each sample and plug in the values in the formula above. Sample 1 has n = 8
and ss = 168.
To get the variance of this sample (S1²), Plugging in the values Now let's find the variance of sample 2. It has n = 6 and ss = 120.
Therefore, the pooled variance for the given two samples is 24. The pooled variance for the given two samples is 24. The pooled variance is the weighted average of the variances of two or more groups, where the weights are the degrees of freedom (n-1) for each group. We can find the variance of each sample using the formula S² = SS/(n-1), where SS is the sum of squares and n is the sample size. Plugging in the values, we find that the variance of both samples is 24. Finally, we can use the formula Sp² = (S1²(n1-1) + S2²(n2-1))/(n1+n2-2) to find the pooled variance, which is also 24.
To know more about variances visit:
https://brainly.com/question/31432390
#SPJ11
х An arrow is shot horizontally from a height of 6.2 m above the ground. The initial speed of the arrow is 43 m/s. Ignoring friction, how long will it take for the arrow to hit the ground? Give your answer to one decimal place.
The arrow will take approximately 1.4 seconds to hit the ground. This can be determined by analyzing the vertical motion of the arrow and considering the effects of gravity.
When the arrow is shot horizontally, its initial vertical velocity is zero since it is only moving horizontally. The only force acting on the arrow in the vertical direction is gravity, which causes it to accelerate downwards at a rate of 9.8 m/s².
Using the equation of motion for vertical motion, h = ut + (1/2)gt², where h is the vertical displacement (6.2 m), u is the initial vertical velocity (0 m/s), g is the acceleration due to gravity (-9.8 m/s²), and t is the time taken, we can rearrange the equation to solve for t.
Rearranging the equation gives us t² = (2h/g), which simplifies to t = √(2h/g). Substituting the given values, we have t = √(2 * 6.2 / 9.8) ≈ 1.4 seconds.
Therefore, the arrow will take approximately 1.4 seconds to hit the ground when shot horizontally from a height of 6.2 meters above the ground, ignoring friction.
To learn more about Motion click here:
brainly.com/question/33317467
#SPJ11
A guitar string with mass density p - 2.4 x 10-4 kg/m is L - 1.08 m long on the guitar. The string is tuned by adjusting the tension to T. 121.9 N. 1) With what speed do waves on the string travet? m/
The waves on the guitar string travel at approximately 1391.6 m/s.
The speed of waves on a string can be calculated using the wave equation:
[tex]v = √(T/μ),[/tex]
where v is the wave speed, T is the tension in the string, and μ is the mass density of the string.
In this case, the tension T is given as 102.2 N, and the mass density μ is given as [tex]2.3 × 10^(-4) kg/m.[/tex]
Plugging these values into the equation, we can calculate the wave speed:
[tex]v = √(102.2 N / 2.3 × 10^(-4) kg/m)[/tex]
≈ √(445652.17 m^2/s^2 / 2.3 × 10^(-4) kg/m)
≈ √(1937601.69 m^2/s^2/kg)
≈ 1391.6 m/s.
To know more about waves refer here
brainly.com/question/29334933#
#SPJ4
Consider a parallel-plate capacitor with empty space between its plates, which are separated by a distance of 2 mm. If the charge on the positive plate is 4 uC, and the electrical potential energy stored in this capacitor is 12 n), what is the magnitude of the electric field in the region between the plates? O 2 V/m O I V/m 04 V/m O 6 V/m O 3 V/m
If the charge on the positive plate is 4 uC, and the electrical potential energy stored in this capacitor is 12 nJ, the magnitude of the electric field in the region between the plates is 3 V/m. The correct option is 3 V/m.
To find the magnitude of the electric field between the plates of a parallel-plate capacitor, we can use the formula:
E = V/d
where E represents the electric field, V is the potential difference between the plates, and d is the distance between the plates.
In this case, the charge on the positive plate is 4 μC, which is equal to the charge on the negative plate. So:
Q = 4 μC
The electrical potential energy stored in the capacitor is 12 nJ. The formula for electrical potential energy stored in a capacitor is:
U = (1/2)QV
where U represents the electrical potential energy, Q is the charge on the capacitor, and V is the potential difference between the plates.
We can rearrange the formula to solve for V:
V = 2U/Q
Substituting the given values, we get:
V = 2 * (12 nJ) / (4 μC)
= 6 nJ/μC
To convert the units to V/m, we need to divide the voltage by the distance:
E = (6 nJ/μC) / (2 mm)
Converting the units:
E = (6 × 10^-9 J) / (4 × 10^-6 C) / (2 × 10^-3 m)
E = 3 V/m
Therefore, the magnitude of the electric field in the region between the plates of the parallel-plate capacitor is 3 V/m.
So, the correct answer is 3 V/m.
Learn more about the electric field here:
https://brainly.com/question/19878202
#SPJ11
What is the age in years of a bone in which the 14C/12C ratio is measured to be 4.45x10-132 Express your answer as a number of years.
The age of the bone, based on the measured 14C/12C ratio of [tex]4.45x10^(-13),[/tex] is approximately 44464 years.
To determine the age of a bone based on the measured ratio of 14C/12C, we can use the concept of radioactive decay. The decay of 14C can be described by the equation:
[tex]N(t) = N₀ * e^(-λt)[/tex]
where:
N(t) is the remaining amount of 14C at time t,
N₀ is the initial amount of 14C,
λ is the decay constant,
and t is the time elapsed.
The ratio of 14C/12C in a living organism is approximately the same as in the atmosphere. However, once an organism dies, the amount of 14C decreases over time due to radioactive decay.
The decay of 14C is characterized by its half-life (T½), which is approximately 5730 years. The decay constant (λ) can be calculated using the relationship:
[tex]λ = ln(2) / T½[/tex]
Given that the 14C/12C ratio is measured to be [tex]4.45x10^(-13)[/tex] (not [tex]4.45x10^(-132)[/tex]as mentioned in[tex]ln(4.45x10^(-13)) = -(ln(2) / 5730 years) * t[/tex] your question, assuming it is a typo), we can determine the fraction of 14C remaining (N(t) / N₀) as:
[tex]N(t) / N₀ = 4.45x10^(-13)[/tex]
Now, let's solve for the age (t):
[tex]4.45x10^(-13) = e^(-λt)[/tex]
Taking the natural logarithm (ln) of both sides:
[tex]ln(4.45x10^(-13)) = -λt[/tex]
To find the value of λ, we can calculate it using the half-life:
[tex]λ = ln(2) / T½ = ln(2) / 5730[/tex] years
Plugging this value into the equation:
[tex]ln(4.45x10^(-13)) = -(ln(2) / 5730 years) * t[/tex]
Now, solving for t:
[tex]t = -ln(4.45x10^(-13)) / (ln(2) / 5730 years[/tex]
t ≈ 44464 years
Therefore, the age of the bone, based on the measured 14C/12C ratio of [tex]4.45x10^(-13)[/tex], is approximately 44464 years.
Learn more about age from the given link
https://brainly.com/question/26423521
#SPJ11
A circular coil of radius 0.54 m is placed in a time-varying magnetic field B(t) = (5.00 x 10-4) sin[(44.0 x 102 rad/s) t] where B is in teslas. The magnetic field is perpendicular to the plane of the coil. Find the magnitude of the induced electric field in the coil at t = 0.001s and t = 0.01 s
To find the magnitude of the induced electric field in the coil at different times, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (emf) in a closed loop is equal to the negative rate of change of magnetic flux through the loop.
The magnetic flux through a circular coil with radius R is given by the equation:
Φ(t) = B(t) * A
where Φ(t) is the magnetic flux, B(t) is the magnetic field, and A is the area of the coil.
The area of a circular coil is given by the equation:
A = π * R^2
Now, let's calculate the magnetic flux at t = 0.001s and t = 0.01s.
At t = 0.001s:
B(0.001) = (5.00 x 10^-4) * sin[(44.0 x 10^2 rad/s) * 0.001]
= (5.00 x 10^-4) * sin[44.0 rad/s * 0.001]
= (5.00 x 10^-4) * sin[0.044 rad]
= (5.00 x 10^-4) * 0.044
= 2.20 x 10^-5 T
Φ(0.001) = B(0.001) * A
= 2.20 x 10^-5 * π * (0.54)^2
≈ 1.57 x 10^-5 T·m^2
At t = 0.01s:
B(0.01) = (5.00 x 10^-4) * sin[(44.0 x 10^2 rad/s) * 0.01]
= (5.00 x 10^-4) * sin[44.0 rad/s * 0.01]
= (5.00 x 10^-4) * sin[0.44 rad]
= (5.00 x 10^-4) * 0.429
= 2.15 x 10^-4 T
Φ(0.01) = B(0.01) * A
= 2.15 x 10^-4 * π * (0.54)^2
≈ 3.04 x 10^-4 T·m^2
Now, we can find the magnitude of the induced electric field using Faraday's law. The induced emf is equal to the negative rate of change of the magnetic flux with respect to time:
E = -dΦ/dt
For t = 0.001s:
E(0.001) = -(dΦ(0.001)/dt)
To calculate the derivative, we differentiate the magnetic flux equation with respect to time:
dΦ(t)/dt = (d/dt)(B(t) * A)
= (dB(t)/dt) * A
Differentiating the magnetic field B(t) with respect to time gives:
dB(t)/dt = (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[(44.0 x 10^2 rad/s) * t]
Substituting the values:
dB(0.001)/dt = (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[(44.0 x 10^2 rad/s) * 0.001]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[44.0 rad/s * 0.001]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[0.044 rad]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * 0.999
= 2.20 x 10^-1 T/s
Now, substitute the values into the equation for the induced electric field:
E(0.001) = -(dΦ(0.001)/dt)
= -[(2.20 x 10^-1) * (1.57 x 10^-5)]
≈ -3.45 x 10^-6 V/m
Similarly, for t = 0.01s:
E(0.01) = -(dΦ(0.01)/dt)
Differentiating the magnetic field B(t) with respect to time gives:
dB(t)/dt = (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[(44.0 x 10^2 rad/s) * t]
Substituting the values:
dB(0.01)/dt = (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[(44.0 x 10^2 rad/s) * 0.01]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[44.0 rad/s * 0.01]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * cos[0.44 rad]
= (5.00 x 10^-4) * (44.0 x 10^2 rad/s) * 0.898
= 2.00 x 10^-1 T/s
Now, substitute the values into the equation for the induced electric field:
E(0.01) = -(dΦ(0.01)/dt)
= -[(2.00 x 10^-1) * (3.04 x 10^-4)]
≈ -6.08 x 10^-5 V/m
Therefore, the magnitude of the induced electric field in the coil at t = 0.001s is approximately 3.45 x 10^-6 V/m, and at t = 0.01s is approximately 6.08 x 10^-5 V/m.
Learn more about electric field on:
https://brainly.com/question/11482745
#SPJ4
An equipotential surface that surrounds a point charge
q has a potential of 436 V and an area of 1.38
m2. Determine q.
The charge (q) of a point charge surrounded by an equipotential surface with a potential of 436 V and an area of 1.38 m², further information or equations are required.
The potential at a point around a point charge is given by the equation V = k * q / r, where V is the potential, k is the electrostatic constant, q is the charge, and r is the distance from the point charge.
The potential (V) of 436 V, it alone does not provide enough information to determine the charge (q) of the point charge. Additional information, such as the distance (r) from the point charge to the equipotential surface, is needed to calculate the charge.
Without this information, it is not possible to determine the value of q based solely on the given potential and area.
To learn more about equipotential.
Click here:brainly.com/question/30800988
#SPJ11
9) Calculating with Faradays law and magnetic flux A flat circular coil of wire has a radius of 0.18 m and is made of 75 turns of wire. The coil is lying flat on a level surface and is entirely within a uniform magnetic field with a magnitude of 0.55 T, pointing straight into the paper. The magnetic field is then completely removed over a time duration of 0.050 s. Calculate the average magnitude of the induced EMF during this time duration. 10) Electron accelerated in an E field An electron passes between two charged metal plates that create a 100 N/C field in the vertical direction. The initial velocity is purely horizontal at 3.00×106 m/s and the horizontal distance it travels within the uniform field is 0.040 m. What is the vertical component of its final velocity?
The vertical component of the final velocity of the electron is - 2.33963×10^6 m/s.
the formula to calculate the magnitude of induced EMF is given as:
ε=−NΔΦ/Δtwhere,ε is the magnitude of induced EMF,N is the number of turns in the coil,ΔΦ is the change in magnetic flux over time, andΔt is the time duration.
So, first, let us calculate the change in magnetic flux over time.Since the magnetic field is uniform, the magnetic flux through the coil can be given as:
Φ=B*Awhere,B is the magnetic field andA is the area of the coil.
In this case, the area of the coil can be given as:
A=π*r²where,r is the radius of the coil.
So,A=π*(0.18 m)²=0.032184 m²And, the magnetic flux through the coil can be given as:Φ=B*A=0.55 T * 0.032184 m² = 0.0177012 Wb
Now, the magnetic field is completely removed over a time duration of 0.050 s. Hence, the change in magnetic flux over time can be given as:
ΔΦ/Δt= (0 - 0.0177012 Wb) / 0.050 s= - 0.354024 V
And, since there are 75 turns in the coil, the magnitude of induced EMF can be given as:
ε=−NΔΦ/Δt= - 75 * (- 0.354024 V)= 26.5518 V
So, the average magnitude of the induced EMF during this time duration is 26.5518 V.
10) Electron accelerated in an E fieldThe formula to calculate the vertical component of the final velocity of an electron accelerated in an E field is given as:
vfy = v0y + ayt
where,vfy is the vertical component of the final velocity,v0y is the vertical component of the initial velocity,ay is the acceleration in the y direction, andt is the time taken.In this case, the electron passes between two charged metal plates that create a 100 N/C field in the vertical direction.
The initial velocity is purely horizontal at 3.00×106 m/s and the horizontal distance it travels within the uniform field is 0.040 m.So, the time taken by the electron can be given as:t = d/v0xt= 0.040 m / 3.00×106 m/s= 1.33333×10^-8 sNow, the acceleration in the y direction can be given as:ay = qE/my
where,q is the charge of the electron,E is the electric field, andmy is the mass of the electron.In this case,q = -1.6×10^-19 C, E = 100 N/C, andmy = 9.11×10^-31 kgSo,ay = qE/my= (- 1.6×10^-19 C * 100 N/C) / 9.11×10^-31 kg= - 1.7547×10^14 m/s²
And, since the initial velocity is purely horizontal, the vertical component of the initial velocity is zero.
So,v0y = 0So, the vertical component of the final velocity of the electron can be given as:vfy = v0y + ayt= 0 + (- 1.7547×10^14 m/s² * 1.33333×10^-8 s)= - 2.33963×10^6 m/s
Therefore, the vertical component of the final velocity of the electron is - 2.33963×10^6 m/s.
Learn more about velocity with the given link,
https://brainly.com/question/80295
#SPJ11
Timer A typical exposure from a dental X-ray is 7 mrem. A typical human head has a mass of 4 ka. How much energy is deposited in your head when you got an X-ray?
The energy deposited in your head during an X-ray is approximately 0.028 Joules.
To calculate the energy deposited in your head during an X-ray, we can use the given exposure of 7 mrem (millirem) and the mass of a typical human head, which is 4 kg.
First, let's convert the exposure from millirem to rem. Since 1 rem is equal to 0.001 J/kg, we can convert it as follows:
Exposure = 7 mrem × (1 rem / 1000 mrem) = 0.007 rem
Next, we can use the formula:
Energy = Exposure × Mass
Substituting the values into the equation:
Energy = 0.007 rem × 4 kg = 0.028 J
Therefore, approximately 0.028 Joules of energy is deposited in your head during an X-ray. This represents the amount of energy absorbed by the tissues in your head during the X-ray procedure. It's important to note that X-ray exposures are carefully controlled to minimize the risks and ensure the safety of patients.
To learn more about energy deposited, Visit:
https://brainly.com/question/31980920
#SPJ11
How much time would it take to stop a 3.90kg ball traveling at 5.00m/s if a constant force of -2.75N is applied to it?
7.09 s
53.6 s
0.284 s
0.141 s
it would take approximately 7.09 seconds to stop the ball.To determine the time it would take to stop the ball, we can use Newton's second law of motion, which states that force is equal to mass times acceleration (F = ma). Rearranging the equation to solve for acceleration, we have a = F/m. Plugging in the given values, we have a = (-2.75 N) / (3.90 kg) = -0.705 m/s².
To calculate the time it takes for the ball to stop, we can use the equation v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since the ball is coming to a stop, the final velocity v is 0 m/s. Plugging in the values, we have 0 = 5.00 m/s + (-0.705 m/s²) * t.
Simplifying the equation, we get -5.00 m/s = -0.705 m/s² * t. Solving for t, we have t = (-5.00 m/s) / (-0.705 m/s²) ≈ 7.09 s.
Therefore, it would take approximately 7.09 seconds to stop the ball.
to learn more about force click here:brainly.com/question/30507236
#SPJ11
1.How high will 1.82 kg rock go if thrown straight up by someone who does 180 J of work on it? Hint: U=mgh=W a) 14.41 m b) 3.31 m c) 10.09 m d) 21.56 m e) None of these is true
The rock will reach a height of 10.09 meters when thrown straight up.
The work done on the rock is equal to the change in potential energy, which can be calculated using the formula U = mgh, where U is the work done, m is the mass of the rock, g is the acceleration due to gravity, and h is the height.
The work done on an object is equal to the change in its potential energy. In this case, the work done on the rock is given as 180 J. We can equate this to the change in potential energy of the rock when thrown straight up.
Using the formula U = mgh, we can solve for h by rearranging the formula to h = U / (mg). Substituting the given values, which are the mass of the rock (1.82 kg) and the acceleration due to gravity (9.8 m/s^2), we can calculate the height reached by the rock. The resulting value is approximately 10.09 meters.
To learn more about height click here brainly.com/question/29131380
#SPJ11
A full water tank in the shape of an inverted right circular cone is 14 m across the top and 7 m high. If the surface of the water in
the tank is 2 m below the top of the tank, how much work is required to pump all the water over the top of the tank? (The density
of water is 1000 kg/m, use neceleration due to gravity g = 9.8 N/kg.)
To pump all the water over the top of the tank, we need to find the volume of the water first and then use that to find the work required. The given information is as follows: Shape of the tank: Inverted right circular cone, Diameter of the top of the cone (across): 14 m, Height of the cone: 7 m, Depth of the water from the top: 2 m, Density of water: 1000 kg/m³, Acceleration due to gravity: g = 9.8 N/kg.
Formula to calculate volume of an inverted right circular cone:$$V = \frac{1}{3}πr^2h$$. Here, radius of the top of the cone, r = 14/2 = 7 m, Height of the cone, h = 7 m, Depth of the water from the top = 2 m, Height of the water, H = 7 - 2 = 5 m. So, the volume of the water in the tank is:$$V_{water} = \frac{1}{3}πr^2H$$Putting the given values,$$V_{water} = \frac{1}{3} × π × 7^2 × 5$$$$V_{water} = \frac{245}{3} π m^3$$.
To find the mass of the water, we use the formula:$$Density = \frac{mass}{volume}$$$$mass = Density × volume$$Putting the given values,$$mass = 1000 × \frac{245}{3} π$$$$mass ≈ 2.56 × 10^5 kg$$.
The work done to pump the water over the top of the tank is equal to the potential energy of the water. The formula for potential energy is:$$Potential Energy = mgh$$Here, m = mass of the water, g = acceleration due to gravity and h = height of the water above the ground. So, putting the given values,$$Potential Energy = mgh$$, $$Potential Energy = 2.56 × 10^5 × 9.8 × 5$$$$Potential Energy ≈ 1.26 × 10^7 J$$.
Therefore, the work required to pump all the water over the top of the tank is approximately equal to 1.26 × 10⁷ J.
Let's learn more about work:
https://brainly.com/question/25573309
#SPJ11
Two people are fighting over a 0.25 kg stick. One person pulls to the right with a force of 24 N and the other person pulls to the left with 25 N. What is the acceleration (magnitude and direction) of the stick? (Ignore all other forces on the stick, such as weight)
Two people are fighting over a 0.25 kg stick. One person pulls to the right with a force of 24 N and the other person pulls to the left with 25 N. The magnitude of the acceleration is 4 m/s², and the direction is to the left (negative direction). Therefore, the stick accelerates to the left with an acceleration magnitude of 4 m/s².
It is assumed that the positive direction is to the right, and the negative direction is to the left.
Force to the right (F[tex]_r[/tex]) = 24 N
Force to the left (F[tex]_l[/tex]) = -25 N (negative sign indicates the opposite direction)
The net force (F[tex]_n_e_t[/tex]) is given by:
F[tex]_n_e_t[/tex] = F[tex]_r[/tex] + F[tex]_l[/tex]
F[tex]_n_e_t[/tex] = 24 N + (-25 N)
F[tex]_n_e_t[/tex] = -1 N
The net force acting on the stick is -1 N to the left. Since force is equal to mass multiplied by acceleration (F = ma), we can calculate the acceleration (a) using Newton's second law of motion.
F[tex]_n_e_t[/tex] = ma
-1 N = 0.25 kg × a
Solving for acceleration:
a = -1 N / 0.25 kg
a = -4 m/s²
Hence, the magnitude of the acceleration is 4 m/s². The stick accelerates to the left with an acceleration magnitude of 4 m/s².
Learn more about the calculation of acceleration here.
https://brainly.com/question/390784
#SPJ4
If you start with a sample containing 10^10 nuclei that have half-life 2.5 hours, what is the activity of the sample after 5 hours?
The activity of the sample after 5 hours is 2.5 * 10^9 dps or 2.5 * 10^9 Bq
The activity of a radioactive sample refers to the rate at which its nuclei decay, and it is typically measured in units of disintegrations per second (dps) or becquerels (Bq).
To determine the activity of the sample after 5 hours, we need to consider the concept of half-life. The half-life of a radioactive substance is the time it takes for half of the nuclei in a sample to decay.
Given that the half-life of the nuclei in the sample is 2.5 hours, we can calculate the number of half-lives that occur within the 5-hour period.
Number of half-lives = (Time elapsed) / (Half-life)
Number of half-lives = 5 hours / 2.5 hours = 2
This means that within the 5-hour period, two half-lives have occurred.
Since each half-life reduces the number of nuclei by half, after one half-life, the number of nuclei remaining is (1/2) * (10^10) = 5 * 10^9 nuclei.
After two half-lives, the number of nuclei remaining is (1/2) * (5 * 10^9) = 2.5 * 10^9 nuclei.
The activity of the sample is directly proportional to the number of remaining nuclei.
Therefore, After 5 hours, the sample has an activity of 2.5 * 109 dps or 2.5 * 109 Bq.
learn more about hour from given link
https://brainly.com/question/27035559
#SPJ11
(a) What is the resistance of a lightbulb that uses an average power of 45.0 W when connected to a 60.0 Hz power source having a maximum voltage of 170 V? 12 (b) What is the resistance of a 110 W bulb? 12
The resistance of the 110 W bulb is 131 Ω.
The formula to calculate resistance is [tex]R = V^2 / P[/tex] where R is resistance, V is voltage, and P is power.
R = V^2 / P, where V[tex]= V_max / √2[/tex] where V_max is the maximum voltage.
The maximum voltage is 170 V.
Therefore,
V = V_max / √2
= 170 / √2
= 120 V.
R = V^2 / P
= (120)^2 / 45
= 320 Ω
Therefore, the resistance of the light bulb is 320 Ω.
(b) Similarly, R = V^2 / P,
where V = V_max / √2.V_max
= 170 V, and
P = 110 W.
Therefore,
V = V_max / √2
= 170 / √2 = 120 V.
R = V^2 / P
= (120)^2 / 110
= 131 Ω
Therefore, the resistance of the 110 W bulb is 131 Ω.
To learn more about resistance visit;
brainly.com/question/3045247
#SPJ11
We can write the gravitational acceleration as g = 20 A, where only A has uncertainty.
h
a) Which error propagation rule (of the 3 listed) is most relevant here?
b) Let D = 1.26 m, h = 0. 033 m, and A = 0.1326 ‡ 0. 0021 m/s?. Compute g.
c) Using the rule you identified in part (a), compute 8g.
) Write your result in the form g ‡ 8g, observing proper significant figures and
units. e) Compute the confidence (Eq. 5.26 from the lab manual) in your result.
f What does the confidence tell you about the experiment that measured g?
g) The accepted value in Honolulu is g = 9. 79 m/s?. Compute the agreement with
your result. (Eq. 5.28 from the lab manual)
h) Does the calculated result agree with expectation?
a) The most relevant error propagation rule is the rule for multiplication or division.
b) The calculated value of g is 2.652 m/s².
c) 8g is computed as 21.216 ± 0.336 m/s².
d) The result is g ± 8g = 2.652 ± 0.336 m/s².
e) The confidence in the result is 0.672 m/s².
f) The confidence level suggests a high precision and reliability in the experiment's measurement of g.
g) The agreement with the accepted value of 9.79 m/s² is 73%.
h) The calculated result does not agree with the expected value of 9.79 m/s².
The most relevant error propagation rule in this case is the rule for multiplication or division. Since we are calculating g using the formula g = 20A, where A has uncertainty, we need to apply the error propagation rule for multiplication. Given D = 1.26 m, h = 0.033 m, and A = 0.1326 ± 0.0021 m/s², we can substitute these values into the formula g = 20A to calculate the value of g.
g = 20 * A = 20 * (0.1326 m/s²) = 2.652 m/s². To compute 8g using the error propagation rule, we multiply the value of g by 8 while considering the uncertainty in A. 8g = 8 * g = 8 * (20A) = 8 * (20 * (0.1326 ± 0.0021)) = 8 * 2.652 ± 8 * 0.042 = 21.216 ± 0.336 m/s²
The result in the form g ± 8g is 2.652 ± 0.336 m/s². To compute the confidence in the result, we can use the formula for confidence (Eq. 5.26 from the lab manual). The confidence represents the range within which the true value of g is likely to fall. Confidence = 2 * (uncertainty in g) = 2 * 0.336 = 0.672 m/s²
The confidence tells us that there is a 95% probability that the true value of g falls within the range of (g - Confidence) to (g + Confidence). It provides a measure of the precision and reliability of the experiment's measurement of g. The accepted value of g in Honolulu is 9.79 m/s². We can compute the agreement with our result using the formula for agreement (Eq. 5.28 from the lab manual).
Agreement = |accepted value - calculated value| / accepted value * 100%. Agreement = |9.79 - 2.652| / 9.79 * 100% = 73%. The calculated result of 2.652 m/s² does not agree with the accepted value of 9.79 m/s² in Honolulu. There is a significant difference between the calculated result and the expected value, indicating a discrepancy between the measurement and the accepted value.
To learn more about propagation rule click here:
brainly.com/question/31192853
#SPJ11
Find the equivalent capacitance between points a and c for the group of capacitors connected as shown. Answer in units of μF. 01610.0 points Consider the capacitor circuit What is the effective capacitance of the circuit? Answer in units of μF.
The equivalent capacitance between points a and c for the given group of capacitors connected in the circuit is [insert value] μF.
To find the equivalent capacitance between points a and c for the given group of capacitors, we can analyze the circuit and apply the appropriate formulas for series and parallel combinations of capacitors.
In the circuit, we have three capacitors connected. Let's label them as C1, C2, and C3. C1 and C2 are in parallel, while C3 is in series with the combination of C1 and C2.
Determine the equivalent capacitance for C1 and C2 (in parallel).
The formula for capacitors in parallel is given by:
1/Ceq = 1/C1 + 1/C2
Calculate the total capacitance for C1 and C2 combined.
Ceq_parallel = 1/(1/C1 + 1/C2)
Determine the equivalent capacitance for the combination of C1, C2, and C3 (in series).
The formula for capacitors in series is given by:
Ceq_series = Ceq_parallel + C3
Calculate the total capacitance for the circuit.
Ceq_total = Ceq_series
Now, substitute the given capacitance values into the formulas and calculate the equivalent capacitance:
Ceq_parallel = 1/(1/C1 + 1/C2)
Ceq_series = Ceq_parallel + C3
Ceq_total = Ceq_series
To learn more about capacitance
brainly.com/question/31432839
#SPJ11
Describe the difference between airspeed, windspeed and
groundspeed when solving vector problems associated with airplane
flight.
Answer:
:))
Explanation:
SCROLL ALL THE WAY DOWN FOR A SHORTER ANSWER.
When solving vector problems associated with airplane flight, it is important to understand the difference between airspeed, windspeed, and groundspeed.
Airspeed is the speed of the airplane relative to the air surrounding it. An airplane's airspeed is measured using an airspeed indicator and is typically expressed in knots. Airspeed does not take into account the effects of wind on the airplane's motion.
Windspeed is the speed and direction of the wind relative to the ground. Windspeed can be measured using a weather station or by observing the effect of the wind on objects such as flags and trees. Windspeed is important in airplane flight because it can affect the airplane's motion by changing its airspeed and direction of flight.
Groundspeed is the speed and direction of the airplane relative to the ground. Groundspeed takes into account the effects of both the airplane's airspeed and the windspeed. In other words, groundspeed is the actual speed and direction at which an airplane is moving over the ground.
When solving vector problems associated with airplane flight, it is important to understand the relationship between airspeed, windspeed, and groundspeed. For example, if an airplane is flying with an airspeed of 100 knots into a headwind with a windspeed of 20 knots, its groundspeed will be slower than its airspeed at only 80 knots. On the other hand, if the airplane is flying with the same airspeed of 100 knots but with a tailwind with a windspeed of 20 knots, its groundspeed will be faster at 120 knots. Therefore, understanding how airspeed, windspeed, and groundspeed are related will help pilots to accurately navigate and plan their flights.
Airspeed is the speed relative to the air. Windspeed is the speed and direction of wind relative to the ground. Groundspeed is the speed and direction relative to the ground. Understanding their relationship is important for accurate navigation and flight planning.
An electron has velocity - (30+42]) km's as it enters a uniform magnetic field 8 -57 Tut What are(a) the radius of the helical path taken by the electron and (b) the pitch of that path? (c) To an observer looking into the magnetic field region from the entrance point of the electron does the electron spiral clockwise or counterclockwise as it moves?
For an electron which has velocity - (30+42]) km's as it enters a uniform magnetic field 8.57 T, (a) the radius of the helical path taken by the electron is 4.22 × 10^-4 m, (b) the pitch of the path is 2.65 × 10^-3 m and (c) to an observer looking into the magnetic field region from the entrance point of the electron, the electron would appear to spiral clockwise as it moves.
Given data : Velocity of electron = - (30 + 42) km/s = -72 km/s
Magnetic field strength = 8.57 T
(a) Radius of the helical path taken by the electron :
We can use the formula for the radius of helical motion of a charged particle in a magnetic field.
It is given by : r = mv/qB where,
m = mass of the charged particle
v = velocity of the charged particle
q = charge of the charged particle
B = magnetic field strength
On substituting the given values, we get : r = mv/qB = (9.11 × 10^-31 kg) × (72 × 10^3 m/s)/(1.6 × 10^-19 C) × (8.57 T)
r = 4.22 × 10^-4 m
(b) Pitch of the path : The pitch of the path is given by,P = 2πr
Since we have already found the value of 'r', we can directly substitute it to get,
P = 2πr = 2π × 4.22 × 10^-4 m = 2.65 × 10^-3 m or 2.65 mm
(c) To an observer looking into the magnetic field region from the entrance point of the electron, the electron would appear to spiral clockwise as it moves.
Thus, the correct options are :
(a) 4.22 × 10^-4 m
(b) 2.65 × 10^-3 m
(c) Clockwise
To learn more about magnetic field strength :
https://brainly.com/question/14411049
#SPJ11
Problem 9: An object is located a distance of d0 = 17.5 cm in front of a concave mirror whose focal length is f = 14 cm.
Part (a) Write an expression for the image distance, di.
Part (b) Numerically, what is this distance in cm?
Problem 12: A flashlight is held at the edge of a swimming pool at a height h = 2.1 m such that its beam makes an angle of θ = 32 degrees with respect to the water's surface. The pool is d = 3.75 m deep and the index of refraction for air and water are n1 = 1 and n2 = 1.33, respectively.
Randomized Variables h = 2.1 m
d = 3.75 m
θ = 32 degrees
What is the horizontal distance, D, from the edge of the pool to the point on the bottom of the pool where the light strikes? Write your answer in m.
Problem 9:An object is located a distance of d0= 17.5 cm in front of a concave mirror whose focal length is f = 14 cm.
Part (a) Write an expression for the image distance, di
.Image distance, di can be obtained by using the mirror formula which is given by:
1/d0 + 1/di = 1/f
the values of d0 and f in the mirror formula,
we get1/17.5 + 1/di = 1/14
Multiplying both sides by 14*17.5*di,
we get14*di + 17.5*14 = 17.5*di14di + 245 = 17.5di
Simplifying this equation we get,di = 245/3.5 - - - - (1)
Since the angle of incidence is equal to the angle of reflection, the angle of the beam with respect to the normal at P is also 32°.Applying Snell's law at the interface between air and water,
we get
n1sinθ = n2sinθ'1sin32° = 1.33sinθ'θ' = 23.46°
We can draw the right triangle ABC where
BC = d = 3.75 mAC = h = 2.1 mAB = AC/tanθ' = 2.1/tan23.46° = 4.03 m D = BC - AB = 3.75 - 4.03 = -0.28 m = -28 cm [Answer], the horizontal distance is 0.28 m to the left of the edge of the pool.
To know more about distance visit:
https://brainly.com/question/13034462
#SPJ11