In the 1700s, Isaac Newton determined that the force of gravity between two objects depends on the mass of the objects and distance between them. He reasoned that things fall toward Earth because it has so much mass. Then in the 1900s, Albert Einstein worked with new discoveries, such as the fact that light always travels the same speed, and he determined a new explanation of how and why gravity works. Mass and distance still matter in Einstein’s explanation, but speed also matters. Newton’s explanation still works for objects close to Earth, but Einstein’s explanation works for all of the objects in the universe.

Answers

Answer 1
That is a good explanation good job

Related Questions

scientific investigation starts with an observation of a natural phenomenon or problem, what observation prompted the family to conduct a scientific investigation? (please need help)

Answers

I’m pretty sure Next person you got this

A person throws a ball up into the air, and the ball falls back toward Earth. At which point would the kinetic energy be the lowest?(1 point)
A)when the ball is at its highest point

B) at a point when the ball is still rising

C)when the ball leaves the person’s hand

D) at a point before the ball hits the ground

Answers

it would be d bc when it’s at its lowest point it means not that much energy and that would be its lowest point which is D

When a person throws a ball up into the air, and the ball falls back toward Earth, the kinetic energy will be the lowest when the ball is at its highest point (option A).

Kinetic energy is given by:

[tex] K = \frac{1}{2}mv^{2} [/tex]

Where:

m: is the mass

v: is the velocity  

So, the kinetic energy is proportional to the velocity and the mass of the object.

When the person throws the ball up into the air, the ball will move upward to a maximum height and then will move down until it hits the ground.

In the upward motion, the ball's velocity will decrease until it reaches the maximum height, where it will be zero.  In the downward motion, the magnitude of the ball's velocity will increase because of the acceleration due to gravity until it reaches the ground.  

From the statements:

A) When the ball is at its highest point, the velocity will be zero, so the kinetic energy will be zero.  

B) When the ball rises, the velocity decreases, so the kinetic energy will also decrease.    

C) When the ball leaves the person's hand, it has an initial velocity that is the highest, so the kinetic energy has at this point, the maximum value.  

D) Before the ball hits the ground, the ball's velocity has the same value (in magnitude) as the initial value (when the ball leaves the person's hand), so the kinetic energy will be the highest at this point (like statement C).  

Therefore, the kinetic energy will be the lowest when the ball is at its highest point (option A).  

Learn more here:

https://brainly.com/question/13275688?referrer=searchResultshttps://brainly.com/question/999862?referrer=searchResults

I hope it helps you!

please help!!!!!!!!!!!!!!!!!!!!!1

Steve fills a jar with water and adds Epsom salts and ammonia. After five minutes, he observes that white particles have formed and settled at the bottom of the jar. Steve is unable to change these particles back to any of the three original substances by heating or stirring the solution. He isolates the white particles and finds that they have properties that are very different from any of the three starting materials. Which statement BEST explains Steve's observation?

Group of answer choices


A physical change occurred because no color change was observed.


A chemical change occurred because a new substance formed.


A physical change occurred because stirring did not change the solution.


A chemical change occurred because a solid substance formed.

Answers

A physical change occurred because stirring did not change the solution is the right answer
It’s a chemical change that occurred because a new substance formed.

Even though not much seemed to change, the question mentioned that Steve is unable to reverse the substance, which means there was a chemical reaction. If he was able to reverse it by heating or stirring, this would be a physical change because those can be reverted back to its original property.

As he was not able to do so, this was a chemical change. A new substance was formed. I think there was also a precipitate involved because of what was produced at the bottom, which is also a chemical change.

Hope my explanation was clear!! :)

What is the main difference between a chemical and a physical change? Use examples to support your answer.

Answers

Answer:

Physical changes are usually about physical states of matter. Chemical changes happen on a molecular level when you have two or more molecules that interact. Chemical changes happen when atomic bonds are broken or created during chemical reactions.

Explanation:

Example of an chemical reaction: explosion

Example of an physical reaction: Ice melting

Plz put me in the brain list  

Examples of physical changes are freezing, melting(melting of ice cubes).

Examples of chemical changes are combustion, rusting of iron.

A physical change is a change that alters the physical properties of matter particularly the form and state.  In many cases, the change is easily reversible. Examples are freezing, melting(melting of ice cubes). A chemical change is a change in which a new kind of matter is formed. It is always accompanied by energy changes which can either be evolution or absorption of heat or light or both.  The process is not reversible. Examples are combustion, rusting of iron, precipitation, e.t.c. An example of chemical change which we see in our daily life is the conversion of milk to curd.

To know more about:-

brainly.com/question/25014732?

which of these atoms are electrically neutral?

Answers

Atoms are electrically neutral because they contain equal quantities of positively charged protons and negatively charged electrons. Electrons and protons have equal but opposite charges, so the result is no net charge. Ions are atoms that have gained or lost electrons.

Answer:

the blue

Explanation:

if an atom contains equal numbers of protons and electrons, the atom is described as being electrically neutral.

what coeiffecents need to be added to balance to balance the chemicial equation Na+02 arrow NaO2

Answers

Answer:

#4 - 4, 1, 2

Explanation:

4Na + 1O2 => 2Na2O

What do I do when I have A test on Measuring and Density


How do I measure the length?

Answers

Use equation mass divided volume for DENSITY

Ruler of meter stick for LENGTH


You can comment a few and I’ll try to help! :)

Fossil fuels are commonly used as a source of energy because _____.

fossil fuels are most readily available.
fossil fuels are a renewable resource.
fossil fuels are best for the environment.
fossil fuels are cost-effective.

Answers

Answer:

fossil fuels are cost-effective.

Answer:Fossil fuels are most readily available and fossil fuels are cost-effective.

Explanation:i got this right on my class have a great day!!!=D

A scientist is studying a compound that includes nitrogen, carbon, oxygen, and hydrogen. Is the scientist studying an organic molecule? Why or why not?

Answers

Answer: It is an organic molecule

Explanation:

In order for a molecule to be organic, it has to contain both carbon and hydrogen. The compound that the scientist is studying contains both.

A molecule of the kind normally found in living systems. Organic molecules are usually composed of carbon atoms in rings or long chains, to which are attached other atoms of such elements as hydrogen, oxygen, and nitrogen. yes this would be organic hope this helps!!

A student looking for an element that will bond with sodium (Na) knows that table salt is a compound of sodium and chlorine (Cl). Based on this information, which of the following elements would MOST likely bond with sodium?
A.argon (Ar)
B.bromine (Br)
C.calcium (Ca)
D.potassium (K)

Answers

D. Potassium (K), i hope this helps!!

According to the concept of electronic configuration and valency sodium is most likely to bond bromine.

What is electronic configuration?

Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.

Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.

Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.

Learn more about electronic configuration,here:

https://brainly.com/question/13497372

#SPJ2

If it rained, what would be the deepest layer the water would go through?

Answers

Answer:

soil

Explanation:


Answer:

A. Soil

Explanation:

can someone please help me ill mark brainliest and lots of points please help me someone that likes helping people please help mee thank you

Answers

Answer:

1) B and 2) D

Explanation:

when scientists refer to the naked eye, it is referring to the eye without any sort of magnifying device, such as a microscope. Algae blooms can result naturally or by human interference

(1) eyes without magnifying devices

A green box contains a blue box and a pink box. The blue box contains C H subscript 4 + 2 O subscript 2. An arrow then leads in the green box to the pink box, which says C O subscript 2 + 2 H subscript 2 O. Lines lead from labels to parts of the boxes. Label A leads to the beginning of the green box. Label B leads to the + in the blue box. Label C leads to the arrow. Label D leads to the 2 in 2 H subscript 2 O. Label E leads to the end of the pink box.
Identify each part of this chemical equation that describes the burning of methane and oxygen.

B (blue box):

D (number):

E (purple box):

Answers

Answer:

A (the entire green box):

✔ chemical equation

B (the blue box):

✔ reactants

C (the arrow):

✔ reacts to form

D (the number):

✔ coefficient

E (the purple box):

✔ products

Answer:

A chemical equation

B  reactants

C reacts to form

D  coefficient

E  products

Explanation:

hope this helps, the person above me is also correct

A student pot acabe of better on a metal rod. Then be placed the other end of the red in a beaker of hot water. The setup for the investigation is shown below
The butter melted in ten minutes. What type of energy did the metal rod conduct to the butter?
electrical
chemical
thermal
mechanical

Answers

i’m assuming it’s thermal since they used hot water, if anyone believes otherwise please comment on this!
Thermal because it’s hot.

After studying chemical reactions in school, Jen examined some of the different ways people use synthetic materials. She found that there are a variety of ways people use them. What are some of the ways people use these materials and why?
Please help out

Answers

When using a dryer to dry your clothes your clothes become synthetic after drying clothes

Does stirring a liquid make it cool down faster?

Answers

Answer:

Stirring will help cool a hot drink because it speeds up the process of convection by bringing the hottest liquid at the bottom to the top

Explanation:

Answer: No not really, all your doing is moving it around

Explanation:

I tested it

Which phrase provides the best definition of a landform region?

A a large area where the topography contains the three main landforms
B the border where two different landforms meet
a large area where the topography is made up of one landform
C a large area where the topography is inconsistent and contains multiple landforms

Answers

Answer:

a large area where the topography is made up of one landform.

A would be your answer

What happens to a wooden log when it is burned?
A.It is completely destroyed.
B.It is completely changed into heat energy.
C.It changes into other types of matter and energy.
D.It physically changes into the gaseous phase.

Answers

C hope this helpsssssss

Answer:

I would say c.

Explanation:

It is transformed into new energy

A. On the Periodic Table of Elements, columns are called ______________________; all of these
elements
have the same number of ___________________________.
B. On the Periodic Table of Elements, rows are called _____________________; all of these have the same
number of __________________________.

Answers

1. Groups
2. They have the same number of electrons in their outer shell
3. Periods
4. They have the same number of shells

On the Periodic Table of Elements, columns are called groups ,all of these elements have same number of valence electrons and the rows are called periods and have same number of valence shells.

Periodic table is a tabular arrangement of elements in the form of a table. In the periodic table, elements are arranged according to the modern periodic law which states that the properties of elements are a periodic function of their atomic numbers.

It is called as periodic because properties repeat after regular intervals of atomic numbers . It is a tabular arrangement consisting of seven horizontal rows called periods and eighteen vertical columns called groups.

Elements present in the same group have same number of valence electrons and hence have similar properties while elements present in the same period show gradual variation in properties due to addition of one electron for each successive element in a period.

Thus, columns are called groups ,all of these elements have same number of valence electrons and the rows are called periods and have same number of valence shells.

Learn more about periodic table,here:

https://brainly.com/question/28747247

#SPJ6

please answer this question quickly

Answers

Answer:

The right would be rusting. not sure what the left would be

Explanation:

Left would be acid rain

Which of the following happens to a material when it goes through a chemical change?

A The substance changes size.
B The substance changes state.
C The substance changes shape.
B The substance changes into a new substance.

Answers

The following happens to a material when it goes through a chemical change is the substance changes into a new substance. Thus option D is correct.

What is chemical change?

Chemical change is defined as a change of materials into another, new materials with different properties and one or more than one new substance are formed.

Physical change is defined as a type of change in which the form of matter is altered but one substance is not transformed to another substance i.e. new substance is not formed.

Thus, the  following happens to a material when it goes through a chemical change is the substance changes into a new substance. Thus option D is correct.

To learn more about chemical change, refer to the link below:

https://brainly.com/question/2591189

#SPJ2

current flows between the reigons of opposite electrical charge, forming a _________.

Answers

Answer:

Lightening bolt

Explanation:

Lighting bolt
Is the answer

Eriq, a chemist, is running tests with four unknown elements. He has found that they all bond the same way, so he knows that they are in the same group on the periodic table of elements. The table shows other properties that Eriq observed.

A 4-column table with 4 rows titled properties of four unknown elements. The first column titled element number has entries 1, 2, 3, 4. The second column titled melting point has entries 266 K, 172 K, 387 K, 53 K. The third column titled boiling point has entries 332 K, 239 K, 457 K, 85 K. The fourth column titled phase at room temperature has entries liquid, gas, solid, gas.

These four elements are most likely in group

15.
16.
17.
18.

Answers

It would be element 17 would most likely go in that group

Answer:17

Explanation:

i agree

An image of a cue ball striking the surface of a pool table is shown. All of the following describe the acceleration of the cue ball EXCEPT-

A. the ball changed direction when it hit the side of the table.

B. the ball traveled at 30 cm/s while it was moving.

C. the ball was at rest until it was struck by the pool cue.

D. the ball eventually came to a stop due to friction.

Answers

The answer will be B I think

The acceleration of the cue ball is not described by the ball traveling at 30 cm/s while it was moving. Therefore, option (B) is correct.

What is acceleration?

Acceleration can be described as the change of velocity of an object with respect to time. The acceleration is a vector quantity as it possesses both magnitude and direction. Acceleration is calculated as the second derivative of position w.r.t. time as well as the first derivative of velocity of an object w.r.t. time.

The force is the product of the mass and acceleration of an object according to Newton's second law of motion,

F = ma

And,    a = F/m

Therefore, the acceleration of a moving object is inversely proportional to its mass.

As the cue ball hit the pool table its direction changed so it defines acceleration as acceleration is a vector quantity. The cue ball eventually stops due to friction.

Learn more about acceleration, here:

https://brainly.com/question/12550364

#SPJ2

10 points Explain the Lunar Eclipse in 4-5 (PLEASE DON'T LOOK IT UP THAT'S PLAGIARIZING

Answers

Answer:

use code sypherpk

Explanation:

copy and paste text from wherever and then open quillbook and paste it into there and it will give you a not plagiarized answer

1) a cold air mass and meets warm air mass. what will happen, in terms of the difference in their densities?


2) archie needs to find the density of an intricately crafted crown, to see if it is pure gold. he has no trouble measuring mass, but he doesnt know what to do next. what should he do?


I NEED HELP PLEASEEE

Answers

1. Well hot air rises because it is less dense,
cold air sinks because more dense.

To find the density of an object measure its mass and its volume. Divide mass by volume to get an object’s density.

Hope this helps:)

Why were the iron fillings in a water a suspension?

Answers

To display the water
a suspension’s components can be separated

Describe one example of an energy transformation in this diagram and explain why it is a transformation. Repeat this description and explanation for an energy transfer.

Answers

Answer:

energy is just we all know that energy  is the ability too do work

as given in example below

Explanation:

we move

we walk

draw

we push

we pull

these all thiings called Energyy

Buying fruit and vegetables needs to be done more often as these types of foods can quickly go rotten. What could you do to slow down the chemical change of fruits and vegetables rotting? Give a reason to support your answer.

Answers

Answer:

putting them in the fredge while in a plastic container

Explanation:

my reason is the cools down / kinda freeze the chemicals so it slows down

Putting them somewhere cold because the atoms slow as the temperature decreases

HELP ME PLEASE I REALLY NEED HELP EXPLAIN IN YOUR OWN WORDS SHOW WORK PLEASE
Be sure to show your work and explain how you got your answer.

Answers

Answer: Y M C A DODODODO Y M C A

i rlly just wanted to do that. sry  i wasted ur time

Explanation:

Other Questions
What is the distance between -12 and 4 on the number line? Her hair was golden and stick straight, like cornstalks in the fields of mynometown. RAMClear sel19. Which computer memory is used for storing programs and datacurrently being processed by the CPU?Mass memoryRAMO Neo-volatile memory What reference angle will you use to determine cos 480 ?A.)30B.)45C.)60D.)0 Whats country is located at 15 north and 120 east? Fill in the bank.355 229 is the same as230- charlie me llamo por telefono celular el maestro oyo mi telefono celular primero segundo tercero cuarto quinto sexto PLEASE ANSWERRR!!!During the ____ preachers emphasized that all people were created equal in gods eyes The belief that the colonies exist for the economic benefit of their mother country (Britain) is called _____Britain ignored enforcing some of their economic policies against the colonies. This practice was called _____A. First Great Awakening B. Mercantilism C. Salutary Neglect Read the poem The Sky is Low, the Clouds are Mean below and answer the question that follows.The sky is low, the clouds are mean,A travelling flake of snowAcross a barn or through a rutDebates if it will go.A narrow wind complains all dayHow some one treated him;Nature, like us, is sometimes caughtWithout her diadem.Which of the following is the pattern of beats in the poem?1. 8, 7, 8, 7; 8, 7, 8, 72. 8, 8, 8, 8; 8, 8, 8, 83. 8, 7, 8, 6; 8, 6, 8, 66, 7, 6, 7; 6, 7, 6, 7 Help with math! 10th grade math :) Can anyone answer this elements Combine with atoms with F in the same ratio as atoms of Mg 1. The function f(t) is equal to the mass of a pumpkin,in kilograms, t days after its seed was planted.Part A:What does the notation f(80) = 3 mean?Part B:Use function notation to show 41 days after thepumpkin seed is planted the pumpkinhas a mass of 1.2 kg. 2 Jenny....... (swim) with her father andfriends next saturday One analog clock loses 3 minutes every 2 hours and another analog clock gains 3 minutes every 4 hours. At noon, the owner sets the correct time on both clocks and leaves on a business trip. When he returns home in less than two weeks, the clocks show the same time. What time do the clocks show? PLEASE HELP ASAP How did the Columbian Exchange affect Europe and the Western Hemisphere? cial Studies 8 Louisiana History CM 16138 2020-2021 LOAX2X45XXWhich industry began to grow during the Spanish settlement of Louisiana?canningfishinglogging* manufacturing ___________were men and women who sold their labor to a person that would pay for their passage to the colonies how to choose a correct strumming for a song on guitar? all living things have this molecule, it has all the information a cell needs