Answer:
Iodine is a non-metal, but it is lustrous (lustrous is the property of metal) in nature.
Which resources are unevenly distributed throughout Earth?
Select all that apply.
oil
soil
iron
oxygen
Answer:
Some natural resources like sunlight and wind are found everywhere, but other natural resources are unevenly distributed. Resources like oil, coal, and natural gas are only found where conditions were favorable to grow and preserve large quantities of animal or plant matter.
Explanation:
Aqueous sodium bromide reacts with chlorine gas to form aqueous sodium chloride and liquid bromine .
Write a balanced chemical equation for this reaction.
Answer:
2 NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)
Explanation:
Let's consider the unbalanced equation that occurs when aqueous sodium bromide reacts with chlorine gas to form aqueous sodium chloride and liquid bromine. This is a single displacement reaction.
NaBr(aq) + Cl₂(g) ⇒ NaCl(aq) + Br₂(l)
We will start balancing Cl atoms by multiplying NaCl by 2.
NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)
Then, we get the balanced equation by multiplying NaBr by 2.
2 NaBr(aq) + Cl₂(g) ⇒ 2 NaCl(aq) + Br₂(l)
5. What physical property of foam makes it a good choice to
use in life vests?
A. Foam has a relative density less than water.
B. Foam is a good thermal insulator.
C Foam is non-magnetic.
D. Foam is soluble in water.
A gas under a pressure of 9.86 kPa and at a temperature of 75°C occupies a 500.0L container. How many moles of gas are in the container?
Answer:
1.7 mol
Explanation:
This is an ideal gas problem. So many units! That's the tip-off usually.
PV=nRT
First convert kPA to atm 1 atm=101.3 kPA so 9.86/101.3 = .097311 atm
(.097311 atm x 500L) = n · 0821 L·atm/mol·K · 348K
Do your multiplication then divide to get n alone and you should get 1.7 mol
Which compound contains a bond with the least ionic character? A. CO B. CaO C. K2O D. Li2O
Answer:
A. CO
Explanation:
This is the answer I believe based on that it has the least amount of elements leading me to think that it would have the least ionic character.
The compound that contains a bond with the least ionic character is CO.
Ionic bonding involves transfer of valency electrons. Usually from a metal to a non metal.
The ionic character or nature of a bond is determined by the relative
electronegativity of the atoms involved.
So, the bigger the difference between the electronegativity of two atoms, the more likely it is to be ionic.
This simply implies that if the electronegativity differences of the atoms
involved are smaller, the ionic character will be small.
Therefore, the compound that contain a bond with the least ionic character is CO.
The difference in negativity of the carbon and oxygen atoms are small, this is
why the compound CO among the options possess the least ionic character.
learn more: https://brainly.com/question/19523724?referrer=searchResults
sketch the electrolytic cell for converting alumina to aluminum
A correct statement of Henry's law is: a. The concentration of a gas in solution is inversely proportional to temperature. b. The concentration of a gas in solution is directly proportional to the mole fraction of solvent. c. The concentration of a gas in solution is independent of pressure. d. The concentration of a gas in a solution is inversely proportional to pressure. e. None of these.
Answer:
e. None of these.
Explanation:
Hey there!
In this case, since the Henry's law is defined in terms of pressure, henry's constant and pressure, as shown below:
[tex]C=K_H*P[/tex]
Whereas C is the concentration, KH the Henry's constant and P the pressure, we infer that the concentration of a gas solution is directly proportional to the pressure, which is not the group choices, therefore, the answer is e. None of these.
Best regards!
what evidence Have you collected to explain The relationship between the seafloor Ready mid ocean ridges and ocean trenches
Answer:Abundant evidence supports the major contentions of the seafloor-spreading theory. First, samples of the deep ocean floor show that basaltic oceanic crust and overlying sediment become progressively younger as the mid-ocean ridge is approached, and the sediment cover is thinner near the ridge.
Explanation:
A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed? (4 points)
Answer:
0.917 L
Explanation:
Step 1: Given data
Molar concentration of the solution (M): 0.530 M (0.530 mol/L)Mass of Ca(OH)₂ (solute): 36.0 gStep 2: Calculate the moles corresponding to 36.0 g of Ca(OH)₂
The molar mass of Ca(OH)₂ is 74.09 g/mol.
36.0 g × 1 mol/74.09 g = 0.486 mol
Step 3: Calculate the volume of the solution
Molarity is equal to the moles of solute divided by the liters of solution.
M = moles of solute / liters of solution
liters of solution = moles of solute / M
liters of solution = 0.486 mol / (0.530 mol/L) = 0.917 L
Answer:
0.917 liters
Hope this helps! :D
Explanation:
5.
(08.02 MC)
A 0.530 M Ca(OH)2 solution was prepared by dissolving 36.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution thus formed? (4 points)
What is the minimum temperature
needed to dissolve 35 grams of KCl in 100 grams of water?
Answer:
[tex]30^{\circ}\text{C}[/tex]
Explanation:
To know the temperature at which KCl dissolves in water we need to refer to the general solubility curves.
In the case of [tex]KCl[/tex], [tex]35\ \text{g}[/tex] of it will dissolve in [tex]100\ \text{g}[/tex] of water at a minimum temperature of [tex]30^{\circ}\text{C}[/tex].
So, the the minimum temperature needed to dissolve 35 grams of KCl in 100 grams of water is [tex]30^{\circ}\text{C}[/tex].
how does fracked gas and oil impact the availability of oil and gas in the US
If 3.644 g (78.01 g/mol) is dissolved in 42.054 g of water and the temperature goes
from 27.8°C to 36.2°C, what is the molar Hrxn (kJ/mol)? Assume the solution has s
= 4.18 Hint: what is the mass of the entire solution?
g.°C
Answer:
[tex]H_{rxn}=-34.36\frac{kJ}{mol}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible to realize that the heat released by the reaction is used up to heat up the mixture, which means we can write:
[tex]-Q_{rxn}=Q_{sol}[/tex]
Whereas the Q of solution is given by the total mass (3.644+42.054), the specific heat of the solution and the change in temperature; thus, we obtain:
[tex]-Q_{rxn}=(3.644g+42.054g)*4.18\frac{J}{g\°C}*(36.2\°C-27.8\°C)\\\\ Q_{rxn}=-1604.55J[/tex]
Next, by computing the moles of the solute, we can proceed to compute the kJ/mol for the enthalpy of reaction (dissolution):
[tex]n=\frac{3.644g}{78.01g/mol}=0.0467mol\\\\H_{rxn}=\frac{Q_{rxn}}{n}\\\\ H_{rxn}=\frac{-1604.55J}{0.0467mol}*\frac{1kJ}{1000J}\\\\ H_{rxn}=-34.36\frac{kJ}{mol}[/tex]
Best regards!
The vapor pressure of ethanol, CH3CH2OH, at 35.0 °C is 13.67 kPa. If 2.03 g of ethanol is enclosed in a 2.50 L container, how much liquid will be present?
Answer:
Hi how are you doing today Jasmine
Electrophilic substitution occurs
Answer:
I hope it's helpful for you....
Explanation:
Electrophilic substitution reactions are chemical reactions in which an electrophile displaces a functional group in a compound, which is typically, but not always, a hydrogen atom.
Which option correctly matches the chemical formula of a compound with its
name?
A. N20, nitrogen dioxide
B. NO2, nitrogen dioxide
C. N20, dinitrogen dioxide
D. NO2, dinitrogen oxide
Answer:
B. NO₂, nitrogen dioxide
Explanation:
Nitrogen dioxide is one of the oxides of nitrogen. It reacts highly and is very harmful for the health of humans. It is regarded as one of the pollutants of the air pollution. The chemical formula of Nitrogen dioxide is NO₂. This gas is produced during the manufacturing of the fertilizers in the industries. Burning of the fossil fuels also contribute in the emission of nitrogen dioxide. Two atoms of oxygen when reacts with one atom of Nitrogen, Nitrogen dioxide is formed.
Quinine in a 1.664-g antimalarial tablet was dissolved in sufficient 0.10 M to give 500 mL of solution. A 15.00-mL aliquot was then diluted to 100.0 mL with the acid. The fluorescence intensity for the diluted sample at 347.5 nm provided a reading of 327 on an arbitrary scale. A standard 100 ppm quinine solution registered 180 when measured under conditions identical to those for the diluted sample. Calculate the mass of quinine in milligrams in the tablet.
Answer:
605.6mg of quinine
Explanation:
Based on Lambert-Beer's law, the intensity of an optical measurement is directely proportional to its concentration.
Unknown concentration gives a reading of 327
100 ppm gives 180 of intensity
The concentration of the diluted quinine tablet is:
327 * (100ppm / 180) = 181.67 ppm. The final dilution
The concentration of the first diluted solution is:
181.67 ppm * (100.0mL / 15mL) = 1211ppm
ppm could be defined as mass of solute (In this case of quinine) in mg per liter of solution. That is:
1211mg / L
As the tablet was diluted to 500mL = 0.5L, the mass of the quinine is:
0.5L * (1211mg / L) =
605.6mg of quinineMany diseases can be prevented with a proper diet, exercise, and abstinence from smoking, alcohol, drugs, and sexual activity. True or False( Explain)
Answer:
TrueExplanation:
This is due to multiple reasons. First of which, proper diet with a variety of selection of foods from vegetables, to dairy and meats can provide the body with essential nutrients used to fight off diseases and germs and improve the immune system. Exercise can also help boost the immune system and prevent diseases as well. It can also improve the condition of the heart which prevents heart disease and help the brain (prevent strokes). Drugs, smoking, alcohol and unsafe sexual activity can lead to a multitude of diseases, such as lung cancer, drug addictions, cardiac arrest, blood clots, HIV and other STDs, liver failure, etc. So it would be wise to abstain from those activities.
What volume would 75.0g of oxygen gas occupy
Answer:
Explanation: It is already known that 1 mole of the gas( or 32g of O2) is equivalent to 22.4 Litres of the oxygen gas. So, 8g is equivalent to = (22.4/32) × 8 = 5.6 L of the gas.
What is the energy of an electron in a Li+ ion when an electron moves from n = 2 to n =3?
Exactly 5.00 L of air at -23oC is warmed to 27o What is the new volume in liters if the pressure remains constant?
Answer:
•⊙¤□
♡⊙♡}□☆●☆|}£♤◇♤♡♡■♡
♡♤♡♤♡♤♡♤♡♤♤□¿♡■○€€□●£》○£6£\5~£6|~
Given a volume of 47.8 mL of gas at STP, _______________ moles of O2 exist
What is the final volume of a 3.5M NaOH solution if the original solution was 20mL of a 7.00M NaOH solution
Answer:
0.04 L (or 40 mL)
Explanation:
The dilution equation is: [tex]M_{s} V_{s} = M_{d} V_{d}[/tex]
[tex]M_{s}[/tex] = the molarity of the sock solution
[tex]V_{s}[/tex] = the volume of the sock solution
[tex]M_{d}[/tex] = the molarity of the diluted solution
[tex]V_{d}[/tex] = the volume of the diluted solution
We are given the original, or stock, solution, which is [tex]M_{s} = 7.00 M NaOH[/tex], and [tex]V_{s} = 0.02 L (20 mL)[/tex]. We are also given the final molarity, which is: [tex]M_{d} = 3.5 M NaOH[/tex].
So, plugging our given into the dilution equation, results in:
[tex]7.00 M * 0.02 L = 3.5M * V_{d}[/tex] (divide both sides by 3.5 M, in order to get [tex]V_{d}[/tex] by itself).
[tex]\frac{7.00 M * 0.02 L}{3.5M} = V_{d}[/tex]
[tex]V_{d} = 0.04 L (or 40 mL)[/tex]
So, the final volume of a 3.5 M NaOH solution, with an original solution of 20 mL of a 7.00 M NaOH solution, is 0.04 L (or 40 mL)
Hopefully this helped. Good luck!
A compound with an approximate molar mass of
65.0g/mol is made up of C, H and Cl. This same
Compound contains 55% of Cl by mass .lf 9g
of the compound contains 4.19 x 10²³ atoms,
determine the compound's:
a empirical formular and molecular formular
Water pollution has severely impacted animals and plants in New York's Hudson
How many moles are in 32.8 L of CO gas at STP?
At STP, 1 mole of any gas occupies 22.4 L of space. Since we are given STP conditions here, we can use this ratio to determine the number of moles of CO gas: (32.8 L CO)/(22.4 mol CO/L CO) = 1.51 mol CO.
So, there are 1.51 moles of CO gas.
The atomic musses of N (99. 64 percent) and 1N (0.36 percent) are 14.00307 amu and 15.0001 amu, respectively. Calculate the average atomic mass of nitrogen. The percentages in parentheses denote the relative abundances C01?
Answer:
14.01 amu
Explanation:
Step 1: Given data
Isotope Atomic mass (am) Abundance (ab)
¹⁴N 14.00307 amu 99.64% (0.9964)
¹⁵N 15.0001 amu 0.36% (0.0036)
Step 2: Calculate the average atomic mass (aam) of nitrogen
We will use the following expression.
aam = ∑ am × ab
aam = 14.00307 amu × 0.9964 + 15.0001 amu × 0.0036 = 14.01 amu
How many grams are in 1.5 moles of oxygen (O2)?
After balancing this equation, how many oxygen atoms are present on the product side of the following equation:
C3H8 + 02 --> CO2 + H20
A.10
B.42
C.2
D.3
Answer:
B
Explanation:
) Please circle the valid statement(s) associated with an adiabatic process, a reversible process, and an isentropic process of a closed system. (A) A reversible, adiabatic process is an isentropic process. (B) The entropy generation of a reversible process is zero. (C) The entropy is constant for an isentropic process. (D) For an adiabatic system, the entropy of the system cannot decrease. (E) All of the above.
Answer:
Option A, C, D
Explanation:
A reversible adiabatic process is an isentropic process as entropy remains constant. Thus,
Entropy change (Delta S) = integral of (Q_rev)/T
Thus, option A and C are correct
For a reversible process, entropy generation is a positive quantity or zero. hence, statement B is not true
In an Adiabatic processes, entropy do not decrease. Hence, option D is also correct
A 0.43g samle of KHP required 24.11cm of NaOH for neutralization. Calculate the molarity of NaOH
Answer:
0.083 M
Explanation:
We'll begin by calculating the number of mole in 0.43 g of KHP (potassium hydrogen phthalate, C₈H₅O₄K). This is can be obtained as follow:
Mass of C₈H₅O₄K = 0.43 g
Molar mass of C₈H₅O₄K = (8×12) + (5×1) + (16× 4) + 39
= 96 + 5 + 64 + 39 = 204 g/mol
Mole of C₈H₅O₄K =?
Mole = mass / molar mass
Mole of C₈H₅O₄K = 0.43 / 204
Mole of C₈H₅O₄K = 0.002 mole
Next, we shall determine the number of mole of NaOH required to react with 0.43 g (i.e 0.002 mole) of KHP. This can be obtained as follow:
C₈H₅O₄K + NaOH → C₈H₄O₄KNa + H₂O
From the balanced equation above,
1 mole of KHP reacted with 1 mole of NaOH.
Therefore, 0.002 mole of KHP will also react with 0.002 mole of NaOH.
Next, we shall convert 24.11 cm³ to L. This can be obtained as follow:
1000 cm³ = 1 L
Therefore,
24.11 cm³ = 24.11 cm³ × 1 L / 1000 cm³
24.11 cm³ = 0.02411 L
Finally, we shall determine the molarity of NaOH. This can be obtained as follow:
Mole of NaOH = 0.00 2 mole
Volume = 0.02411 L
Molarity of NaOH =?
Molarity = mole /Volume
Molarity of NaOH = 0.002 / 0.02411
Molarity of NaOH = 0.083 M