It is urgent! Can you solve this equation by power series method?

dy/dx=[tex]0.2x^{2}+y[/tex]

I have 35min to deliver the answer and I don't know how to do it.

Answers

Answer 1

Answer:

yes

Explanation:

Yes, I can solve this equation by power series method. Here are the steps:

Assume a power series solution of the form. [tex]y = \sum_{n=0}^{\infty} a_n x^n[/tex]Differentiate term by term to get [tex]y' = \sum_{n=1}^{\infty} n a_n x^{n-1}[/tex]Substitute into the equation and simplify to get [tex]$$\sum_{n=1}^{\infty} n a_n x^{n-1} = 2 \sum_{n=0}^{\infty} a_n x^{n+2} + \sum_{n=0}^{\infty} a_n x^n$$[/tex]

Re-index the sums to have the same power of x and combine them to get                                              [tex]$$\sum_{n=0}^{\infty} [(n+1) a_{n+1} - 2 a_n x^2 - a_n] x^n = 0$$[/tex]

Equate the coefficients of each power of x to zero and solve for the recurrence relation [tex]$$a_{n+1} = \frac{2 a_n x^2 + a_n}{n+1}$$[/tex]

Use the initial conditions [tex]$y(0) = a_0$[/tex] and [tex]$y'(0) = a_1$[/tex] to find the values of [tex]$a_0$[/tex] and [tex]$a_1$[/tex]

Substitute the values of [tex]$a_0$[/tex] and [tex]$a_1$[/tex] into the recurrence relation and find the values of [tex]a_2[/tex],[tex]a_3[/tex], etc.

Write the solution as [tex]$$y = \sum_{n=0}^{\infty} a_n x^n$$[/tex]

[tex]For example, if we have $y(0) = 1$ and $y'(0) = 2$, then we get $a_0 = 1$ and $a_1 = 2$. Then we can find $a_2$, $a_3$, etc. by using the recurrence relation:a_2 = \frac{2 a_1 x^2 + a_1}{2} = \frac{5}{2}x^2a_3 = \frac{2 a_2 x^2 + a_2}{3} = \frac{25}{12}x^4a_4 = \frac{2 a_3 x^2 + a_3}{4} = \frac{125}{96}x^6[/tex]

The solution is then [tex]y = 1 + 2x + \frac{5}{2} x^{2} + \frac{25}{12} x^{4} +\frac{125}{96} x^{6}+...[/tex]

Answer 2
To solve the differential equation using the power series method, we can assume a power series representation for the function \(y(x)\) as:

\[y(x) = \sum_{n=0}^{\infty} a_n x^n\]

Let's differentiate this series with respect to \(x\):

\[\frac{dy}{dx} = \sum_{n=0}^{\infty} a_n n x^{n-1} = \sum_{n=0}^{\infty} a_n (n+1) x^n\]

Substituting this into the given differential equation, we get:

\[\sum_{n=0}^{\infty} a_n (n+1) x^n = 0.2x^2 + \sum_{n=0}^{\infty} a_n x^n\]

Comparing the coefficients of like powers of \(x\) on both sides, we have:

For the left side:
\(a_0\) term: \(a_1 = 0.2a_0\)
\(a_1\) term: \(2a_2 = 0.2a_1 + a_0\)
\(a_2\) term: \(3a_3 = 0.2a_2 + a_1\)

And so on. We can use these recurrence relations to find the values of the coefficients \(a_n\) one by one.

To get started, let's determine the first few coefficients:

\(a_1 = 0.2a_0\)

\(2a_2 = 0.2a_1 + a_0\)

\(3a_3 = 0.2a_2 + a_1\)

Once we have determined the values of \(a_0\), \(a_1\), \(a_2\), and \(a_3\), we can continue the process to find more coefficients using the recurrence relations.

I recommend using a computer algebra system or a software package such as MATLAB or Mathematica to automate this process and calculate the coefficients efficiently. It might be challenging to complete this calculation manually within the given time frame of 35 minutes.

Related Questions

What was the most technologically advanced car in the 90's

Answers

Answer:

There were several technologically advanced cars in the 1990s, including the Mitsubishi 3000GT, Porsche 959, and Williams FW15C Formula One car. It is difficult to determine a single car as the "most technologically advanced" since advancements varied across different models and manufacturers. However, the 1993 Williams FW15C is often considered one of the most technologically advanced Formula One cars of all time , featuring advanced electronics, active suspension, and advanced aerodynamics. Additionally, the 90s were a golden decade for technologically advanced Japanese cars , including iconic models like the Nissan Skyline GT-R and Toyota Supra.

Explanation:

Answer:

While there were many advanced cars in the 90's the McLaren F1 was one of the most technologically advanced cars in the '90s.

Hope this helps:))

Which of the following is recommended as part of the annual maintenance program for a gasoline-powered boat?

A) Change the spark plugs with automotive plugs and check spark distance
B.) Drain and check bilge along with topping off the anti-freeze level
C.) Calibration and re-installation of an automotive-type fuel pump
D.) Examination of thru-hull fittings for signs of leakage or corrosion

Answers

The most recommended choice as part of the annual maintenance program for a gasoline-powered boat would be option D) Examination of thru-hull fittings for signs of leakage or corrosion.

Thru-hull fittings are essential components of a boat's plumbing system.

They are responsible for allowing water to enter or exit the boat for various purposes such as cooling, bilge pumping, or livewell circulation.

Regular inspection of thru-hull fittings is crucial to ensure their integrity and functionality.

Examining thru-hull fittings for signs of leakage or corrosion is important for several reasons.

Firstly, leaks in thru-hull fittings can lead to water ingress, which can cause damage to the hull, electrical systems, or equipment onboard.

Detecting leaks early on can help prevent further damage and potential sinking of the boat.

Secondly, corrosion can weaken the fittings over time, compromising their structural integrity.

Corroded thru-hull fittings may fail, leading to water intrusion or even loss of the fitting itself.

By inspecting for signs of corrosion, such as rust or deterioration, necessary maintenance or replacement can be planned to ensure the fittings are in good condition.

Regular examination of thru-hull fittings should include checking for tightness, cracks, wear, or other visible damage.

It is also advisable to ensure the proper operation of any valves associated with the fittings.

While the other options may also be part of a maintenance program, examining thru-hull fittings for leakage or corrosion is particularly crucial for the safety and reliability of a gasoline-powered boat.

It helps mitigate potential risks associated with water ingress, hull integrity, and overall vessel performance.

For more questions on corrosion

https://brainly.com/question/489228

#SPJ8

What is the first thing you should do after retrieving a boat onto a trailer?

A.) Transfer all gear from the boat to the vehicle
B.) Check that the trailer lights are working
C.) Secure any items that are loose in the boat
D.) Pull the trailer well away from the boat ramp

Answers

Answer:

D.) Pull the trailer well away from the boat ramp

Explanation:

After retrieving a boat onto a trailer, the first thing you should do is move the trailer away from the boat ramp to allow other boaters to use the ramp. This helps maintain a smooth flow of traffic and prevents congestion. Once the trailer is in a safe location, you can then secure the boat to the trailer using straps or tie-downs. After securing the boat, you can proceed with other tasks such as transferring gear from the boat to the vehicle, checking trailer lights, and securing any loose items within the boat.

The first thing you should do after retrieving a boat onto a trailer is to pull the trailer well away from the boat ramp. Therefore option D is correct.

After retrieving a boat onto a trailer, the first thing you should do is pull the trailer well away from the boat ramp. This is important for several reasons:

1. Safety: Pulling the trailer away from the boat ramp ensures that you are not blocking the ramp, allowing other boaters to access the water. It helps maintain a smooth flow of traffic and prevents congestion and delays at the ramp.

2. Courtesy: By promptly moving the trailer away from the boat ramp, you show consideration for other boaters who may be waiting to launch or retrieve their boats. It is good boating etiquette to minimize the time spent at the ramp to allow others to use it efficiently.

3. Parking: Moving the trailer away from the ramp provides you with the opportunity to find a suitable parking spot for your trailer and vehicle.

It allows you to safely and securely park your trailer in an appropriate designated area, ensuring it is not obstructing traffic or creating any hazards.

Know more about retrieving a boat:

https://brainly.com/question/3937416

#SPJ2


A company has the goal of developing technology to remove carbon dioxide
from the atmosphere. Its design team is making a model based on one
possible solution to the problem. Which step of the engineering design
process comes next?

Answers

Answer: The next step in the engineering design process would be to create a prototype of the model and test it to see how well it works.

What is the proper technique for anchoring?

A.) From the bow
B.) Over the port side
C.) Over the stern
D.) From the starboard quarter

Answers

From the Bow

Head slowly into the wind or current to a position upwind it up current of where you actually want to end up
Other Questions
Jake drives a tractor from one town to another, a distance of 120 kilometers. He drives 6 kilometers per hour faster on the return trip, cutting 1 hour off the time. How fast does he drive each way? Objective In this project you are required to take data from a temperature sensor via ADC module of the TIVA cards. The temperature data of last 30 seconds should be stored and its average should be read in the output of the system. The output of the system should be in the following scenarios. 1- The temperature should be read via the LED of the cards. Here, the temperature data should be coded as follows: The colors that would be read in the LED should be red, yellow, green, and blue. O In case of your card does not provide any one of the listed colors, you can use another one, after letting the research assistants know. The temperature levels or the order of the colors should agree exactly with the following scenario: O Determine the greatest student ID number in your project group and take the entire name and surname of the student. O The colors from blue to red should have an ascending order from A to Z (A has the lowest order in the alphabet) O To make the data flow continuous, the LED should switch on and off with an increasing frequency from 10 Hz to 40 Hz as the level of the stored temperature increases at each of four different intervals. In other words, the switch rate of the LED should be slowest when the temperature level, i.e., the voltage level at the ADC is closest to the lowest limit in that specific interval, and it should increase as the temperature approach to the highest limit that temperature interval. 2- Use UART module and once "Enter" key is pressed on the keyboard, transfer data to PC and read the data on the monitor. Explain what influences affect gender identity andgender-related behavior? Discuss the reasons for following a. RCDs (Residual Current Devices) used in residential electrical installations have a rating of 30 mA. b. If the neutral conductor in a 4-conductor (three live conductors and a neutral conductor) distribution line is open circuited or broken, electrical equipments connected beyond the broken point could get damaged due to over voltages. CLASSWORK Find the instruction count functions. and the time complexities for the following so code fragments: ) for (ico; i Use the following diagram to answer the next two questions: The quantity represented by the number 1 in the diagram is: 3. n= the order of the bright fringe b. = the wavelength of the light c. d= the distance between the two slits d. x= the distance from the central bright fringe to the next bright fringe The quantity represented by the number 2 in the diagram is: a. d= distance between the two slits b. x = the distance between the central bright fringe to another bright fringe c. I= distance from the double slit to the screen d. = the wavelength of light Clear my choice H.W/ The results of open-circuit and short-circuit tests on a 25-KVA 440/220 V 60 HZ transformer are as follows: Open-circuit test: primary open-circuited, with instrumentation on the low-voltage side. Input voltage, 220 V; input current 9.6 A; input power 710 W. Short-circuit test: secondary short-circuit, with instrumentation on the high-voltage Sid. Input voltage 42 V; input current 57 A; input power 1030 W. Obtain the parameters of the exact equivalent circuit (fig. 4.17), referred to the high-voltage side. Assume that R1 = a R2 and X1 = 2X2 just need help with this 100 points cause why not.Answer the reflection question in 4-5 complete sentences.What was one positive item and one negative item of the Columbian Exchange? Explain each ones impact. Consider y[n] -0.4y[n 1] = -0.8x[n-1] a) Find the transfer function the system, i.e. H(z)? b) Find the impulse response of the systems, i.e. h[n]? . A ray of light traveling in transparent material 1 with index of refraction n 1=1.20 makes an angle 1=51.0 with the normal to a flat interface with transparent material 2, which has index of refraction n 2=1.70, as shown. What is the angle of refraction 2? A. 68.1 B. 37.5 C. 29.1 D. 33.3 Having a only a single seller for a good (a monopolist):Raises buyers value for the productLowers buyers value for the productRaises the price of buyers outside optionLowers the price of buyers outside optionRaises sellers marginal costLowers sellers marginal cost There are two competing processes for the manufacture of lactic acid, chemical and biochemical syntheses. Discuss the advantages and disadvantages of synthesising lactic acid via the biochemical route. For the 2021-2022 NFL season, the National Football League has made taunting a point of emphasis.Eleven taunting penalties were called by referees within the first two weeks of the season matching the total from the entire previous season.What are your thoughts on the rule, its new point of emphasis and its implications? By hand calculations, determine the design strength Prof a 50 ksi axially loaded W14x109 steel column. This column is 30 ft long. The column is braced perpendicular to its weak or y-axis at one-third points (every 10 ft). Therefore, (KL)x=30 ft and (KL)-10 ft. Check your hand calculations using column tables in part 4 of the manual. Consider the following statement.For all real numbers x and y. [xyl-1-ylShow that the statement is false by finding values for x and y and their calculated values of [xy] and [x] [yl such that [ay] and []-[y are not equal.Counterexample: (x, x. [xyl. [x]-)-([Y)Hence, [xyl and [x]- [y] are not always equal. For this extra credit opportunity you are to watch The Slanted Screen- Hollywood's Representation of Asian Men in Film \& Television. A link to the film can be For you to obtain access to this film, you must have access to Kanopy. You can access Kanopy through obtaining a Riverside Country E-Library card. Signing up takes less than 5 minutes. You can sign up here: Link Upon witnessing this content, you are to provide a critique and assessment of the film based on materials covered in class. The papers must be 1.5-2pgs in length in 12 font/ Times New Roman and double spaced. Consider responding to the following questions in your paper: I.-What messages were being conveyed by the film? - How might this apply to your own lived experiences? - How does this connect to the readings? - How does this enhance, support, or change your understanding of race in American society? According to Confucious thought, Science is the sure way toachieve virtue and goodness as well as bring peace and birth andinner happiness. Discuss the importance of the education system inbuilding What action has been taken by the Malaysian to solve issues regarding palm oil government Which of the following is a "balanced" string, with balanced symbol-pairs (1, 0, < >? O a. "c)d[e> ]D" O b. "a[b(xy A)B]e D" O c. All of the other answer d. "a[b(A)]xy C]D" b] Which of the following structures is limited to access elements only at structure end? O a. Both Stack and Queue Ob. Both List and Stack O c. Both Queue and List O d. All of the other answers c) What is the number of element movements required, to insert a new item at the middle of an Array-List with size 16? O a. 8 O b. None of the other answers . O d. 16 a) Which of the following is correct? O a. An undirected graph contains arcs. Ob. An undirected graph contains edges. Oc. An undirected graph contains both arcs and edges. O d. None of the other answers Which of the following are TRUE of international environmental efforts? Select all that apply. The Montreal Protocol is a failed international treaty related to global climate changed. The Montreal Protocol is a failed international treaty related to global climate change The Paris Agreement was negotiated by 196 countries at the United Nations in 2015 and these countries are committed to limiting the mean global temperature The United States and China work solely by themselves and are not part of any international governmental efforts to protect Earth from things like climate change and the hole in the ozone International efforts are challenging, and success can be difficult, but collaboration between countries to solved environmental problems does exist Wealthy countries such as the USA, China, India and the European Union account for a largest portion of greenhouse gas emissions and are therefore essential in international cooperation if the Paris Agreement is to be successful Question 6 2 pts Humans are an environmental force that unfortunately has negatively impacted our planet. We impact the environment every day both in terms of our. and choices and actions. individual and collective abiotic and biotic sustainable and biocentric anthropocentric and man-made international and non-govemmental