Ketone 1 gives two different bicyclic products depending on the base used: when treated with potassium tert-butoxide at room temperature, it produces ketone 2, while when treated with LDA at low temperatures and then heated, it produces ketone 3. Write arrow-pushing mechanisms for the formation of both 2and 3and explain why the reaction conditions favor each product

The mass of copper in the penny is 15.84 grams.

The mass of copper in a penny can be calculated by multiplying the number of copper atoms present in the penny with the molar mass of copper.

Given that the penny contains 1.5 x 10²³ atoms of copper, we can use the Avogadro's constant to convert the number of atoms to moles.

1 mole of any substance contains 6.022 x 10²³ particles, which is the Avogadro's constant.

Number of moles of copper in the penny = 1.5 x 10²³ / 6.022 x 10²³ = 0.249 mol

The mass of copper in the penny can then be calculated using the molar mass of copper, which is 63.55 g/mol.

Mass of copper in penny = Number of moles x Molar mass

Mass of copper in penny = 0.249 mol x 63.55 g/mol

Mass of copper in penny = 15.84 g

To know more about molar mass , refer here:

https://brainly.com/question/22997914#

#SPJ11

Answer:

C. Ethyl dihydrogen amine

The pressure in the each of the units of the pressure is a s:

atm = 0.91

psi = 13.5

kpa = 93.12

The barometric pressure = 698.5 mmHg

The conversion of pressure unit from mmHg to atm :

1 mmHg = 0.00131579 atm

698.5 mmHg = 0.91 atm

The 698.5 mmHg is expressed as 0.91 atm.

The conversion of pressure unit from mmHg to psi :

1 mmHg = 0.0193368 psi

698.5 mmHg = 13.5 psi

The 698.5 mmHg is expressed as 13.5 psi.

The conversion of pressure unit from mmHg to kpa :

1 mmHg = 0.133322 kpa

698.5 mmHg = 93.12 kpa

The 698.5 mmHg is expressed as 93.12 kpa.

To learn more about pressure here

https://brainly.com/question/29898233

#SPJ4

To convert mmHg to atm, divide the mmHg value by 760. To convert mmHg to psi, divide the mmHg value by 51.714. Therefore, 698.5 mmHg is equal to 0.924 atm, 13.37 psi and 93.5 kPa.

Equality is the state of having the same rights, status, and opportunities regardless of gender, race, religion, or other characteristics. It means that all people are treated without prejudice or discrimination and that everyone can access the same resources, services, and opportunities. Equality is essential to the functioning of a fair and just society, and it is one of the core values of many countries. It is also essential to achieving social and economic progress. Equality is a fundamental human right, and it is essential to creating a sense of inclusion and belonging in a society.

Atm: 0.924 atm

Psi: 13.37 psi

Kpa: 93.5 kPa

To learn more about equal

https://brainly.com/question/26283409

#SPJ4

2.83 moles of [tex]Al_2(SO_4)_3[/tex]  are produced when 8.5 moles of H2SO4 are available to react.

The balanced chemical equation for the reaction between sulfuric acid (H2SO4) and the aluminum sulfate [tex]Al_2(SO_4)_3[/tex] is:

[tex]3 H_2SO_4 + Al_2(SO_4)_3[/tex]  → [tex]Al_2(SO_4)_3 + 3 H_2O[/tex]

From the equation, we can see that for every one mole of the [tex]Al_2(SO_4)_3[/tex] produced, three moles of [tex]H_2SO_4[/tex] are needed. Therefore, the number of moles of the [tex]Al_2(SO_4)_3[/tex]produced is one-third the number of moles of the [tex]H_2SO_4[/tex] available to react.

Given that 8.5 moles of [tex]H_2SO_4[/tex] are available to react, the number of moles of [tex]Al_2(SO_4)_3[/tex] produced can be calculated as:

8.5 moles [tex]H_2SO_4[/tex] × (1 mole [tex]Al_2(SO_4)_3[/tex] / 3 moles [tex]H_2SO_4[/tex]) = 2.83 moles [tex]Al_2(SO_4)_3[/tex]

To know more about balanced chemical equation, here

brainly.com/question/28294176

#SPJ1

16.77 grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield.

To find out how many grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield, we'll use the following steps:

1. Convert the volume of oxygen gas to moles using the molar volume of gas at STP (22.4 L/mol).
2. Adjust for the yield percentage.
3. Use the stoichiometry of the balanced equation to find the moles of KClO3.
4. Convert moles of KClO3 to grams using its molar mass.

1. Moles of O2 produced: (3.45 L) / (22.4 L/mol) = 0.154 moles O2
2. Adjust for yield: 0.154 moles / 0.753 = 0.205 moles O2 (theoretical yield)
3. Moles of KClO3: (0.205 moles O2) * (2 moles KClO3 / 3 moles O2) = 0.137 moles KClO3
4. Grams of KClO3: (0.137 moles KClO3) * (122.55 g/mol) = 16.77 g KClO3

So, 16.77 grams of KClO3 must be decomposed to produce 3.45 L of oxygen at STP with a 75.3% yield.

To learn more about yield, refer below:

https://brainly.com/question/30700754

#SPJ11

Answer:

d. Activation energy is the answer

A coupled reaction refers to the process in which the energy released from one chemical reaction is used to drive another chemical reaction.

This is possible when the two reactions are physically connected in such a way that the energy from the first reaction is directly used to power the second reaction. For example, the breakdown of ATP (adenosine triphosphate) to ADP (adenosine diphosphate) and inorganic phosphate (Pi) is energetically favorable, releasing energy that can be used to drive other reactions in the cell. In a coupled reaction, this energy can be used to power the formation of a peptide bond during protein synthesis, which is energetically unfavorable on its own.

To know more about coupled reaction , here

brainly.com/question/28098538

#SPJ4

--The complete Question is, What is a coupled reaction?--

To calculate the mass of mercury(I) chloride that the chemist has added to the reaction flask, we need to know the molar mass of the compound and the number of moles of the solution added.

The molar mass of mercury(I) chloride is 232.6 g/mol. The chemist added an unspecified volume of the solution, so we cannot directly calculate the number of moles added. However, we can use the concentration of the solution, which is typically given in units of moles per liter (mol/L).

Let's assume that the concentration of the mercury(I) chloride solution is 0.1 mol/L. This means that there are 0.1 moles of mercury(I) chloride in every liter of the solution. We don't know how much of the solution the chemist added, but we can use a conversion factor to calculate the number of moles based on the volume.

For example, if the chemist added 10 mL of the solution, we can convert that to liters by dividing by 1000 (1 mL = 0.001 L).
10 mL x (0.001 L/1 mL) = 0.01 L
Now we can use the concentration to calculate the number of moles:

0.1 mol/L x 0.01 L = 0.001 mol
Finally, we can use the molar mass to convert from moles to grams:
0.001 mol x 232.6 g/mol = 0.2326 g

To convert to micrograms, we need to multiply by 1,000,000:
0.2326 g x 1,000,000 µg/g = 232,600 µg
Therefore, the mass of mercury(I) chloride added to the reaction flask is 232,600 µg, rounded to significant digits.

It's worth noting that the exact answer will depend on the actual concentration of the solution and the volume added, but this calculation provides a general approach to solving this type of problem.

To know more about chemist  refer here

https://brainly.com/question/30007736#

#SPJ11

1) The balanced reaction is [tex]2CO + O_{2} ---- > 2CO_{2}[/tex]

2) 313.6 mL is required so that 630 mL of carbon monoxide gas is completely converted to carbon dioxide.

3) 3.136 L are produced if the catalytic converter processes 6.25 L of carbon monoxide.

4) The volume of oxygen is 1.23L.

If 1  mole of CO occupies 22400 mL

x moles of CO occupies 630 mL

x = 0.028 moles

If 2 moles of CO reacts with 1 mole of oxygen

0.028 moles of CO reacts with 0.028 moles * 1/2

= 0.014 moles

Volume of oxygen required = 0.014 moles * 22400 mL

= 313.6 mL

If 1 mole of CO occupies 22.4 L

x moles of CO occupies 6.25 L

x = 0.28 moles

If 2 moles of CO produces 1 mole of carbon dioxide

0.28 moles of CO produces  0.28 * 1/2

= 0.14 moles

Volume of the carbon dioxide = 0.14 moles * 22.4 L

= 3.136 L

If 1 mole of carbon dioxide occupies 22.4 L

x moles of carbon dioxide occupies 2.5 L

x = 2.5 L * 1/22.4 L

x = 0.11 moles

If 1 mole of oxygen produces 2 moles of carbon dioxide

x moles of oxygen produces 0.11 moles of carbon dioxide

x = 0.055 moles

Volume of oxygen =  0.055 moles * 22.4 L

= 1.23L

Learn more about gas volume:https://brainly.com/question/24189159

#SPJ1

The boiling point of the solution is 80.58 °C, which is prepared by dissolving 2. 50 g of biphenyl (C₁₂ H₁₀).

To determine the boiling point of the solution, we need to use the equation;

Δ[tex]T_b}[/tex] = [tex]K_{b}[/tex] x m

Where ΔTb is boiling point elevation, is molal boiling point elevation constant, and m is molality of the solution.

First, we to calculate the molality of the solution;

moles of biphenyl =2.50 g / 154 g/mol

= 0.0162 mol

mass of benzene = 85.0 g

moles of benzene = 85.0 g / 78.11 g/mol

= 1.088 mol

molality = moles of solute/mass of solvent (in kg)

molality = 0.0162 mol / 0.085 kg

= 0.19 mol/kg

Next, we need to look up the molal boiling point elevation constant ([tex]K_{b}[/tex]) for benzene. The value of [tex]K_{b}[/tex] for benzene is 2.53 °C/m.

Finally, we alculate the boiling point elevation;

Δ[tex]T_b}[/tex] = [tex]K_{b}[/tex] x m

Δ[tex]T_b}[/tex] = 2.53 °C/m x 0.19 mol/kg

= 0.481 °C

The boiling point elevation (Δ[tex]T_b}[/tex]) is the difference between the boiling point of the solution and the boiling point of the pure solvent. The boiling point of pure benzene is 80.1 °C. Therefore, the boiling point of the solution will be;

Boiling point of solution = 80.1 °C + 0.481 °C

= 80.58 °C

So, the boiling point of the solution is 80.58 °C.

To know more about boiling point here

https://brainly.com/question/25777663

#SPJ4

The substance that will cool the fastest when equal masses are heated to the same temperature is the one with the lowest specific heat.

This is because a substance with a lower specific heat requires less energy to raise its temperature by a certain amount, and therefore it will release heat more quickly when it cools down.

Out of the given substances, substance A has the lowest specific heat of 0.90 J/g-°C, so it will cool the fastest when equal masses are heated to the same temperature.

Substance B has a specific heat of 1.70 J/g-°C, substance C has a specific heat of 2.70 J/g-°C, and substance D has the highest specific heat of 4.18 J/g-°C.

To know more about specific heat refer to-

https://brainly.com/question/11297584

#SPJ11

When CO₂ is heated from 15°C to 37°C, its molar internal energy changes by 2446.2 J/mol, as does its molar enthalpy.

The following equation can be used to determine how carbon dioxide (CO₂) will change in molar enthalpy and molar internal energy when heated from 15 to 37 degrees Celsius:

ΔH = ΔU + ΔnRT

ΔU = nCvΔT

where:

ΔH = change in molar enthalpy of CO₂ (in J/mol)

ΔU = change in molar internal energy of CO₂ (in J/mol)

Δn = change in moles of CO₂ (in mol)

R = universal gas constant (8.314 J/(mol·K))

T = temperature (in K)

Cv = molar heat capacity at constant volume (in J/(mol·K))

ΔT = change in temperature (in K)

First, let's calculate the change in temperature:

ΔT = T2 - T1

= (37 + 273.15) K - (15 + 273.15) K

= 22 K

Next, let's calculate the change in molar internal energy:

ΔU = nCvΔT

= 3 mol × 37.1 J/(mol·K) × 22 K

= 2446.2 J/mol

Now, let's calculate the change in molar enthalpy using the equation:

ΔH = ΔU + ΔnRT

where Δn = 0 because the number of moles of CO₂ does not change during heating. Therefore:

ΔH = ΔU + ΔnRT

= 2446.2 J/mol + 0 mol × 8.314 J/(mol·K) × (37 + 273.15) K

= 2446.2 J/mol

To know more about molar enthalpy, refer:

https://brainly.com/question/30627521

#SPJ4

The standard cell potential (∆°cell) can be calculated using the formula:

∆°cell = ∆°reduction (reduced) - ∆°oxidation (oxidized)

where ∆°reduction and ∆°oxidation are the standard reduction potentials of the reduction and oxidation half-reactions, respectively.

The oxidation half-reaction is:

Ni2+(aq) + 2e- → Ni(s) ∆°oxidation = - 0.26 V

The reduction half-reaction is:

Mg2+(aq) + 2e- → Mg(s) ∆°reduction = - 2.37 V

Therefore, the standard cell potential is:

∆°cell = ∆°reduction - ∆°oxidation

∆°cell = (-2.37 V) - (-0.26 V)

∆°cell = -2.11 V

The equilibrium constant (K) can be calculated from the standard cell potential using the Nernst equation:

∆°cell = -(RT/nF) ln K

where R is the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (298 K), n is the number of electrons transferred in the balanced equation (2), and F is the Faraday constant (96,485 C/mol).

Substituting the values and solving for K, we get:

K = exp(-(∆°cell)/(RT/nF))

K = exp(-((-2.11 V)*(96,485 C/mol)/(8.314 J/(mol·K)298 K2)))

K = 1.1 × 10^12

Therefore, the equilibrium constant for the reaction is 1.1 × 10^12.

Visit here to learn more about Nernst equation brainly.com/question/13043546

#SPJ11

One possible approach is to create a safe and controlled demonstration using common household materials, such as baking soda and vinegar. Mixing these two substances produces carbon dioxide gas, which can be collected and observed.

To perform the demonstration safely, it is important to wear appropriate personal protective equipment, such as gloves and eye protection, and to conduct the demonstration in a well-ventilated area to minimize the risk of exposure to the gas.

In addition to the practical considerations of performing a demonstration, it is also important to reflect on the significance of the demonstration and its relation to the holy week.

The demonstration can serve as a reminder of the ways in which the natural world around us can provide opportunities for learning and understanding, and can also be seen as a symbol of renewal and transformation, which are central themes of the holy week.

Finally, it is important to reflect on the current pandemic situation and the need to prioritize safety and responsible behavior.

Demonstrations should be performed in a way that minimizes the risk of transmission of the virus, and individuals should follow guidelines and protocols established by health authorities and local governments.

Overall, exhibiting a gas during the holy week can be a meaningful and educational experience, but it is important to approach the demonstration with caution and responsibility, both in terms of personal safety and the current pandemic situation.

To know more about approach refer here

https://brainly.com/question/18721465#

#SPJ11

The molar concentration of the solution formed when 0.55 mol of Ca(OH)₂ are dissolved in 2.20 liters of HOH is 0.25 mol/L.

To find molar concentration of a solution use the formula:

Molar concentration = moles of solute / volume of solution in liters

The moles of solute are 0.55 mol of Ca(OH)₂ and the volume of the solution is 2.20 liters of H₂O.

So, the molar concentration of the Ca(OH)₂ solution is:

Molar concentration = 0.55 mol / 2.20 L

Molar concentration ≈ 0.25 mol/L

Therefore, the molar concentration of the Ca(OH)₂ solution is 0.25 mol/L.

To learn more about molar visit:

https://brainly.com/question/14923826

#SPJ11

The concentration of the H₂SO₄ solution Erica used was approximately 2.0 M.

To find the concentration of H₂SO₄ solution used by Erica, we can use the concept of stoichiometry and the balanced chemical equation for the neutralization reaction between KOH and H₂SO₄:

KOH + H₂SO₄ -> K₂SO₄ + 2H2O

From the balanced equation, we can see that the mole ratio of KOH to H₂SO₄ is 1:1. This means that the number of moles of H₂SO₄ used in the reaction is equal to the number of moles of KOH. We can use this fact to calculate the number of moles of H₂SO₄ used:

moles of KOH = volume of KOH solution (in L) x concentration of KOH solution
moles of KOH = 80.0 mL x (1 L/1000 mL) x 0.70 mol/L = 0.056 mol

Since the mole ratio of KOH to H₂SO₄ is 1:1, the number of moles of H₂SO₄ used is also 0.056 mol. Now we can use the same formula as above to calculate the concentration of H₂SO₄:

concentration of H₂SO₄ = moles of H2SO4 / volume of H₂SO₄ solution (in L)
concentration of H₂SO₄ = 0.056 mol / (28.0 mL x 1 L/1000 mL) = 2.00 mol/L

Therefore, the concentration of the H₂SO₄ solution Erica used was 2.00 M.

Learn more about concentration at https://brainly.com/question/17206790

#SPJ11

The mass of 6.9 moles of nitrous acid (HNO₂) is 324.3 grams.

To calculate the mass of 6.9 moles of nitrous acid (HNO₂), follow these steps:

1. Determine the molar mass of HNO₂.
2. Multiply the molar mass by the given moles (6.9 moles) to find the mass.

Step 1: Determine the molar mass of HNO₂.
HNO₂ consists of 1 hydrogen atom, 1 nitrogen atom, and 2 oxygen atoms.
- The atomic mass of hydrogen (H) is 1 g/mol.
- The atomic mass of nitrogen (N) is 14 g/mol.
- The atomic mass of oxygen (O) is 16 g/mol.

Molar mass of HNO₂ = (1 x 1) + (1 x 14) + (2 x 16) = 1 + 14 + 32 = 47 g/mol.

Step 2: Multiply the molar mass by the given moles (6.9 moles).
Mass of HNO₂ = 6.9 moles × 47 g/mol = 324.3 g.

So, the mass of 6.9 moles of nitrous acid (HNO₂) is 324.3 grams.

Learn more about nitrous acid (HNO₂) at https://brainly.com/question/1576794

#SPJ11

The answer is D) 15.5 grams.

To solve this problem, we need to use stoichiometry and the given balanced chemical equation. First, we need to determine the limiting reagent by calculating the number of moles of NH3 and O2:

9.75 g [tex]NH_3[/tex] x (1 mol  [tex]NH_3[/tex]/17.031 g  [tex]NH_3[/tex]) = 0.571 mol  [tex]NH_3[/tex]
Excess O2, so we do not need to calculate.

Now, we can use the mole ratio from the balanced equation to determine the moles of H2O produced:

0.571 mol  [tex]NH_3[/tex] x (6 mol H2O/4 mol  [tex]NH_3[/tex]) = 0.857 mol H2O

Finally, we can convert the moles of H2O to grams:

0.857 mol H2O x (18.015 g H2O/1 mol H2O) = 15.44 g H2O

Therefore, the answer is D) 15.5 grams.

To know more about balanced equations:

https://brainly.com/question/30485389

#SPJ11

The order of the atoms from most positive overall charge to least positive overall charge is:  Atom B > Atom R > Atom A > Atom P.

What is the order of atoms?

To determine the order of the atoms from most positive overall charge to least positive overall charge, we need to compare the number of protons (positive charges) and electrons (negative charges) for each atom.

Atom R has 26 protons and 24 electrons. Therefore, it has a net positive charge of 2+.

Atom B has 24 protons and 19 electrons. Therefore, it has a net positive charge of 5+.

Atom A has 14 protons and 16 electrons. Therefore, it has a net negative charge of 2-.

Atom P has 8 protons and 11 electrons. Therefore, it has a net negative charge of 3-.

Therefore, the order of the atoms from most positive overall charge to least positive overall charge is:

Atom B > Atom R > Atom A > Atom P.

To know more about charge, visit:

https://brainly.com/question/29291620

#SPJ9

Answer:

Explanation:

no

To solve this problem, we need to use the combined gas law, which relates the pressure, volume, and temperature of a gas.

The combined gas law is expressed as:

(P1V1)/T1 = (P2V2)/T2

where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature, P2 is the final pressure, V2 is the final volume, and T2 is the final temperature.

In this problem, we are given the initial volume V1 as 2.32 liters and the initial temperature T1 as 24.0°C. We need to find the final volume V2 when the temperature is raised to 48.0°C.

We can set up the equation as:

(P1V1)/T1 = (P2V2)/T2

Since the pressure remains constant, we can cancel it out:

V1/T1 = V2/T2

We can rearrange this equation to solve for V2:

V2 = (V1/T1) x T2

Substituting the given values, we get:

V2 = (2.32 L/297.15 K) x 321.15 K

V2 = 2.86 L

Therefore, the new volume of the balloon is 2.86 liters when heated to 48.0°C.

To know more about combined gas law:

https://brainly.com/question/30458409

#SPJ11

Value might be different from absolute zero due to several factors like Measurement errors, External factors, Non-ideal conditions.

"Why might your value be different from absolute zero?" we need to understand the following terms:

1. Value: Refers to a quantity or numerical measurement in a specific context.
2. Absolute zero: The lowest possible temperature, at which all molecular motion stops. It is 0 Kelvin (K) or -273.15 degrees Celsius (°C) or -459.67 degrees Fahrenheit (°F).

Your value might be different from absolute zero due to several factors, such as:
1. Measurement errors: If you are measuring a temperature, there could be inaccuracies in your measuring device, leading to a value different from absolute zero.
2. External factors: The presence of heat or energy in your system can cause the value to deviate from absolute zero.
3. Non-ideal conditions: In real-world situations, reaching absolute zero is practically impossible due to quantum effects and other factors, causing your value to be higher than absolute zero.

By understanding these factors, you can identify why your value may differ from absolute zero.

To know more about Measurement errors:

https://brainly.com/question/475573

#SPJ11

The best answer to the question "What is volume?" is b. The amount of space occupied by matter. Volume is a physical property of matter that refers to the amount of space that an object or substance takes up. It is often measured in cubic units such as cubic meters, cubic feet, or cubic centimeters.

It is important to note that volume is not the same as mass or weight, as it refers to the amount of space that matter occupies rather than the amount of matter itself. In summary, volume is the amount of space occupied by matter and is an important concept in the study of physics and chemistry.

to know more about Volume refer here

https://brainly.com/question/23409099#

#SPJ11

The  statements correctly describe protecting groups are :

"A reactive functional group converted to another functional group and it will not interfere desired reaction."

"The Protecting group easily removed (deprotection) to the regenerate original functional group."

The protecting group are the molecular formula that will be introduced  the specific functional group and which is present in the poly-functional molecule and the protecting group block the reactivity under the some reaction conditions and which is needed to make the modifications in molecule.

The protecting group readily and the protecting group is selectively introduced to functional group in poly-functional molecule. Protecting group is capable of the selectively removed in under some of the mild conditions when protection is no more longer required.

To learn more about functional group here

https://brainly.com/question/14618322

#SPJ4

the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.

The solubility of Ni(OH)2 depends on the pH of the solution because it can undergo acid-base reactions according to the following equilibrium:

Ni(OH)2(s) + 2 H2O(l) ⇌ Ni(OH)2(aq) + 2 OH^-(aq)

1. At pH 8.0, the solution is slightly basic, so we can assume that the hydroxide ion concentration is 10^-6 M.

The solubility product expression for Ni(OH)2 is:

Ksp = [Ni2+][OH^-]^2

Since the solution is buffered at pH 8.0, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

Therefore, [OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

2. At pH 10.3, the hydroxide ion concentration is 10^-4.7 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-4.7 M = -7.6×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

3. At pH 11.9, the hydroxide ion concentration is 10^-3.1 M.

[OH^-]^2 = Ksp = 6.0×10^-16 M^3

[OH^-] = sqrt(Ksp) = 7.7×10^-6 M

The excess hydroxide ion concentration is:

[OH^-] - 10^-3.1 M = -9.9×10^-6 M

Since the excess hydroxide ion concentration is small compared to the total concentration of OH
^-, we can assume that the concentration of Ni2+ is negligible compared to the concentration of OH^-.

The molar solubility of Ni(OH)2 is half the hydroxide ion concentration, or 3.9×10^-6 M.

Therefore, the molar solubility of Ni(OH)2 when buffered at pH 8.0, 10.3, and 11.9 is approximately 3.9×10^-6 M in all cases.
Visit to know more about solubility:-

https://brainly.com/question/23946616

#SPJ11

The solubility is the amount of a substance that dissolves in a given quantity of solvent at a particular temperature to produce a saturated solution.

Definition: Solubility is defined as the maximum amount of solute that can dissolve in a given quantity of solvent at a specific temperature and pressure to form a saturated solution. It is typically expressed in terms of the mass of solute per unit volume or mass of solvent.

Solute and Solvent: In a solution, the solute is the substance that is being dissolved, while the solvent is the medium in which the solute dissolves. The solute can be a solid, liquid, or gas, while the solvent is usually a liquid, but can also be a gas or a solid in some cases.

Saturated Solution: A saturated solution is a solution in which the maximum amount of solute has been dissolved in a given quantity of solvent at a specific temperature. In a saturated solution, the rate of dissolution of the solute is balanced by the rate of precipitation or crystallization of the solute, resulting in a dynamic equilibrium.

Factors Affecting Solubility: The solubility of a solute depends on several factors, including temperature, pressure, and the nature of the solute and solvent.

Generally, increasing temperature enhances solubility for most solid solutes, while the effect of pressure on solubility is more significant for gases dissolved in liquids. The polarity and intermolecular forces between the solute and solvent molecules also influence solubility.

Solubility Curves: Solubility can be represented graphically by constructing solubility curves. These curves depict the relationship between the solute's solubility and the temperature or pressure.

Solubility curves can help determine the maximum amount of solute that can dissolve under different conditions and can vary for different solutes and solvents.

Supersaturation: Under certain conditions, it is possible to create a supersaturated solution, where the solute concentration exceeds the solubility limit at a given temperature.

Supersaturated solutions are unstable and can result in the precipitation of excess solute upon the introduction of a seed crystal or disturbance.

To learn more about solubility, refer below:

https://brainly.com/question/29661360

#SPJ11

The number of lead atoms in a piece of lead with a volume of 1.907 cm³ is 1.54e22 atoms.

To find this, follow these steps:
1. Calculate the mass of the lead piece using its volume and density: mass = volume x density = 1.907 cm³ x 11.34 g/cm³ = 21.61 g.
2. Determine the molar mass of lead (Pb): 207.2 g/mol.
3. Calculate the number of moles of lead in the piece: moles = mass/molar mass = 21.61 g / 207.2 g/mol = 0.104 mol.
4. Use Avogadro's number to find the number of atoms: atoms = moles x Avogadro's number = 0.104 mol x 6.022e23 atoms/mol = 1.54e22 atoms.

So, there are 1.54e22 lead atoms in the given piece of lead.

To know more about Avogadro's number click on below link:

https://brainly.com/question/28812626#

#SPJ11

The explanations aq and g are the ones that accurately explain the chemical equation. The appropriate choices are thus C. (so), solid

D. (l), liters

Symbols serve the following four purposes: Motivating others to take action via emotion; socially uniting groups by fostering a sense of common identity and values Clarification and revelation - show insight and clarity into the divine. Communication - conveying emotional components of an event.

The product and reactant symbols have been used to represent the chemical equation. The moles of an element that underwent a reaction are contained in the chemical equation. Prior to the compound, the moles were written as the coefficient.

learn more about chemical equations

brainly.com/question/21049751

#SPJ1