Answer:
La definición de un elemento es una parte o aspecto de algo abstracto, especialmente uno que es esencial o característico.
Which of the following is the net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid? (A) NaF (aq) + HCI (aq) → Naci (aq) + HF (aq) (B) Na+ (aq) + F- (aq) + H+ (aq) + CI+ (aq) → Na+ (aq) + Cl - (aq) + HF (aq) (C) Na+ (aq) + CI+ (aq) → NaCl (aq) (D) F- (aq) + H+ (aq) → HF (aq)
The net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid is B. Na+ (aq) + F- (aq) + H+ (aq) + Cl- (aq) → Na+ (aq) + Cl- (aq) + HF (aq)
This is the net ionic equation for the reaction between aqueous sodium fluoride and hydrochloric acid. The balanced equation for this reaction is NaF (aq) + HCl (aq) → NaCl (aq) +HF (aq).
The net ionic equation is derived by canceling out the spectator ions, which are ions that don't participate in the chemical reaction. In this case, Na+ and Cl- are spectator ions, which means that they don't participate in the reaction and are present in the same form on both sides of the equation. Therefore, they are cancelled out, leaving the net ionic equation Na+ (aq) + F- (aq) + H+ (aq) + Cl- (aq) → Na+ (aq) + Cl- (aq) + HF (aq).
Learn more about net ionic equations here: https://brainly.com/question/19705645
#SPJ4
Earth’s atmosphere is a mixture of gases. Which gas makes up almost 80% of the atmosphere by volume?
A.
oxygen
B.
nitrogen
C.
carbon dioxide
D.
water vapor
Shriram saw the Sun on his LEFT while Kabir saw it on his RIGHT.Based on this, Which of the following statements is true?
Answer:
they were facing the oppisite ways
Explanation:
A container holds two gases at standard pressure. If the first gas exerts 359.42 mm
Hg, how much pressure does the second gas exert?
Answer:
400.58
Explanation:
Standard pressure is 1atm/760 mm Hg
760-359.42= 400.58
An 80.0-gram sample of water at 10.00C absorbs 1680 Joules of heat energy. What is the final temperature of the water
108°C is the final temperature of the water after absorption of 1680 Joules of heat energy.
What is temperature?Temperature is a physical quantity used to measure the average kinetic energy of molecules in matter. This is measured with a thermometer or other device that measures the average kinetic energy of the molecules within the substance. The terms Celsius (°C), Fahrenheit (°F), or Kelvin are commonly used to describe temperature (K). Temperature can affect the physical state of matter.
By rearranging the equation gives:
ΔT = q/mc
Plugging in the given values,
ΔT = 1680/ (80.0 g × 4.184 J/g·C)
= 98°C.
Since the initial temperature was 10°C, the final temperature is:
ΔT = T₂ - T₁
98°C = T₂ - 10
T₂ = 108°C
To learn more about Temperature
https://brainly.com/question/25384702
#SPJ4
what product is obtained when an acid reacts with a metal?
Answer:
salt and hydrogen gas
Explanation:
acid + metal = salt + hydrogen
Answer:
hope this helps
Explanation:
hydrogen gas
An acid will react with a metal to form a salt and hydrogen gas. The general word equation for the reaction between an acid and a metal is as follows: acid + metal → salt + hydrogen.
12.7 grams of magnesium chloride is dissolved into water in a flask and set aside for an experiment. The scientist forgets about the solution and the sunlight evaporates it. She needs at least 11 grams of magnesium chloride to continue the experiment. Will she be able to recover enough magnesium chloride from the original flask to continue the experiment
Answer:
Yes, she will be able to recover enough magnesium chloride from the original flask to continue the experiment
Explanation:
The solution prepared by the scientist contains 12.7g of magnesium chloride. The sunlight will evaporate only the water present. When the volume decreases, the magnesium chloride precipitates. When all water evaporates, all the solute, magnesium chloride precipitates totally.
That means she will recover the 12.7g of magnesium chloride.
Answer: Yes, she will be able to recover 12.7g in the flask
Explanation: Founders Educere answer
2H₂(g) + O2(g) → 2H₂O(g)
How many liters of H₂ are required to form 5 moles of H₂O at STP?
Answer:
The answer is 21.5 L
Explanation:
Which of the following elements can be prepared by electrolysis of their aqueous salts: O copper O fluorine O silver O nitrate O potassium O calcium O iodine
O copper of the following elements can be prepared by electrolysis of their aqueous salts
What are the byproducts of aqueous solution electrolysis?H+ ions are drawn to the cathode during the electrolysis of water, where they pick up electrons to create hydrogen gas. The oxygen gas is formed when OH-ions are drawn to the anode and lose their electrons.
What three byproducts of electrolysis are there?Sodium chloride solution electrolysis is a significant industrial process. Chlorine gas is created at the positive electrode; hydrogen gas is created at the negative electrode; and an alkali is left in the solution as three valuable chemicals.
learn more about electrolysis
https://brainly.com/question/12994141
#SPJ4
H2O2 → H2O+ ½ O2
Hydrogen peroxide decomposes to produce water and oxygen according to the equation above. An experimentally determined graph for the first-order decomposition of hydrogen peroxide is provided below.
Which of the following best identifies the rate constant k for the reaction based on the information in the plot of ln[H2O2] versus time (t)?
O k = ln[H2O2] at t = 0s
O k = ln[H2O2] at t = 500s
O k = −(slope of plot)
O k = −1/(slope of plot)
k = -1/(slope of plot) is the correct answer to identify the rate constant k for the reaction based on the information in the plot of ln[H2O2] versus time (t).
The equation for the first-order decomposition of hydrogen peroxide is H2O2 → H2O+ ½ O2The graph provided is a plot of ln[H2O2] versus time (t)The rate constant (k) is a measure of how fast a reaction occursIn the context of first-order reactions, the rate constant is related to the slope of a plot of ln[H2O2] versus time (t)Therefore, the rate constant can be determined by finding the slope of the plot and then using the formula k = -1/(slope of plot)
Learn more about rate constant here:
https://brainly.com/question/24749252
#SPJ4
Warm air rises because:
A.) It is made of helium
B.) As it warms the particles spread out making it less dense
C.) As it warms the particles get closer together making it more dense
D.) Air always moves towards the sun or moon due to gravity
As the air gets warmer it rises because, particles spread out making it less dense. The diffusing capability of gas molecules make it possible.
What is intermolecular forces ?Intermolecular force are the force that keep the particles of a substance binded together. Gaseous molecule easily diffuse in air , since the intermolecular attraction is very less in them.
In solid state molecules are densely packed and difficult to move apart. In liquid state , particles have some space to move and in gases molecules are far apart due to less intermolecular force.
As the gas molecules in air absorbs heat energy, they overcome all the intermolecular forces and will spread out in the air. Thus, they rises above over a temperature gradient.
Find more on intermolecular force:
https://brainly.com/question/9007693
#SPJ2
HELPPPP!!!!!
1. Calculate the pressure exerted by a 200 lb man wearing size 10 shoes, if the area of each shoe in contact with the floor is 20 square inches
The pressure exerted by a 200 lb man wearing size 10 shoes, if the area of each shoe in contact with the floor is 20 square inches is about 5.77 Pa.
What is pressure ?Pressure is the force exerted by unit area. Hence, as the force applied increases, pressure increases.
To calculate the pressure exerted by the man, we need to use the formula:
Pressure = Force / Area
where the force is the weight of the man, and the area is the total area of both shoes in contact with the floor.
First, we need to convert the weight of the man from pounds (lb) to Newtons (N), since the SI unit of force is the Newton. We can do this using the conversion factor:
1 lb = 4.44822 N
So, the weight of the man in Newtons is:
200 lb x (4.44822 N/lb) = 896.44 N
Next, we need to calculate the total area of both shoes in contact with the floor. Since the man is wearing size 10 shoes, we can estimate the area of each shoe to be:
Area per shoe = πr^2 = π(5 in)^2 = 78.54 in^2
So, the total area of both shoes in contact with the floor is:
Total area = 2 x 78.54 in² = 157.08 in²
Now we can calculate the pressure exerted by the man:
Pressure = Force / Area = 896.44 N / 157.08 in²
We need to convert the units of area from square inches (in²) to square meters (m²), since the SI unit of pressure is the Pascal (Pa) and 1 Pa = 1 N/m²:
Pressure = (896.44 N / 157.08 in^2) x (1 m^2 / 1550 in^2) = 5.77 Pa
Therefore, the pressure exerted by the man is approximately 5.77 Pa.
Find more on pressure:
https://brainly.com/question/945436
#SPJ2
How many moles of O2 are required to burn 1.65 mol of C4H10? C4H10+O2→CO2+H2O
4. Markeith found several fossils and decided to use Carbon-14,
which has a half-life of 5,730 years, to measure the age. How old is
each rock? Please help
b. A fossil that has 6. 25 % of its carbon atoms still
unstable?
C. A fossil that has 75% of its atoms STABLE?
A fossil that has 6.25% of its carbon atoms is still unstable.
Carbon-14 dating is a method of determining the age of organic material. Measures the amount of carbon-14 (a radioactive isotope of carbon) present in the sample. The half-life of carbon-14 is 5,730 years. This means that after 5,730 years, half of the carbon-14 atoms in the sample have decayed to nitrogen.
If 6.25% of the fossil carbon atoms are unstable, this means that 93.75% of the carbon-14 atoms in the sample have already decayed. To determine the age of a fossil, the following formula can be used:
Age = (half-life x ln(1-(fraction of decayed carbon-14/100))) / ln(2)
Age = ( 5,730 x ln(1 - (93.75/100))) / ln(2)
age = 11,460 years old
c. A fossil in which 75% of the atoms are STABLE.
If 75% of the fossil atoms are STABLE, this means that 25% of the carbon-14 atoms in the sample have decayed. The same formula as above can be used to determine the fossil age. 75 )) / ln(2)
Age = 23,120 years
Please note that these are approximate values, as the actual age of the fossils may be affected by various factors such as contamination, preservation, and measurement error.
Learn more about Radiocarbon dating and Archaeology here: https://brainly.com/question/20847687
#SPJ4
The specific heat of water is 4.186 J/g°C. A sample of 40. g H subscript 2 O is at an initial temperature of 91.0 °C. If the sample of water released a total of 1,300 joules, what is the approximate final temperature of the water?
a. 74 °C
b. 87 °C
c. 81 °C
d. 83 °C
Is an irony on the discrepancy between the expected result and actual result?
Irony of situation is a discrepancy between the expected result and actual results. Irony involves the perception that things are not what they are said to be or what they seem.
What is irony?One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.
Here,
The irony of the issue is the difference between the expected and actual results. Irony is the impression that things are not what they appear to be or what they are purported to be.
To know more about irony,
brainly.com/question/1695719
#SPJ4
5L of air at-50 C is warmed to 100 C. What is the new volume?
Answer:
V2 = 5.8 L
Explanation:
T1 = 50°C = 323 K
V1 = 5L
T2 = 100°C = 373 K
V2 =?
According to Charles's law,
V1/T1 = V2/T2
---> V2 = (T2/T1)V1 = (373K/323K)(5 L)
= 5.8 L
Which of the following is a true statement?
Work requires only sound energy.
Energy can accomplish work.
Energy is not necessary to do work.
Work requires only light energy.
Answer:
b) energy can accomplish work
Explanation:
5. Extend your thinking: What strategies did you use to hunt for moths?
Answer:
Moths are hunted and killed in a variety of ways. I'll explain how we go about hunting and killing moths.
Explanation:
Step-by-Step:
Obtain a sticky trap in the morning and afternoon. It's available at Target and Walmart. Cover it in moth pheromones or anything else you know will attract moths. They will be stuck in the sticky trap for a long time and will eventually die as a result of not being able to escape.
At night, get or buy a lamp and turn it on. This will attract a lot of moths and make them easier to see. Then spray the area with insecticide or insect repellent. Finally, they should perish.
Tip: If a large swarm of moths becomes too much for you to handle, call pest control and they will get rid of them for you!
Learn more about moths:
https://brainly.com/question/23384980
#SPJ2
What is measuring tools for sewing?
Measuring tools like Clear ruler, yardstick, measuring tape etc. They are very useful for the perfect fit and shape of any garment and even home furnishing.
Sewing is the craft of fastening or attaching objects using stitches which is made up of a sewing needle and thread.
Measuring tools are the instruments used by practitioners and researches to aid in the assessment or evaluation of the subjects, clients or patients etc. These instruments are used to measure or collect the data on a variety of variables ranging from psychosocial wellbeing or physical functioning.
Measuring tools in sewing are as follows: Measuring tape, clear ruler, quilting ruler, yardstick, French curve etc.
To know more about sewing here
https://brainly.com/question/1642881
#SPJ4
What us the % composition of oxygen (O) in iron (III) hydroxide, Fe(OH)
3?
Answer:
44.91% of Oxygen in Iron (III) hydroxide
Explanation:
To solve this question we must find the molar mass of Fe(OH)3 and the molar mass of the oxygen in this molecule. Percent composition will be:
Molar mass Oxygen / molar mass Fe(OH)3 * 100
Molar mass Fe(OH)3 and oxygen:
1Fe = 55.845g/mol*1 = 55.845
3O = 16.00g/mol*3 = 48.00 - Molar mass of Oxygen
3H = 1.008g/mol*3 = 3.024
55.845 + 48.00 + 3.024 =
106.869g/mol is molar mass of Fe(OH)3
% Composition of oxygen is:
48.00g/mol / 106.869g/mol * 100 =
44.91% of Oxygen in Iron (III) hydroxideThe broad bands or regions located around the nucleus where the electrons are found are called energy rings.
True
False
It is false that the broad bands or regions located around the nucleus where the electrons are found are called energy rings.
The nucleus is the centre of an atom. Protons and neutrons are particles that make up the nucleus. Shells of electrons rotate around the nucleus. The atom is made up of a small nucleus surrounded by electrons that move. The nucleus includes protons, with a positive charge equivalent to the negative charge of an electron. Neutrons, which have almost the same mass but still no charge as protons, may also be found in the nucleus.
The nuclear powerful force extends long enough from each baryon to bind protons and neutrons together while repelling the repelling electrical force between positively charged protons. The nuclear force acting has a relatively narrow range and practically vanishes just beyond the nucleus's border.
To know more about the Electrons, here
https://brainly.com/question/3503522
#SPJ4
How much heat energy is obtained when 1 kg of ethane gas, C2H6, is burned in oxygen according to the equation: 2C2H6(g)+7O2(g)→4CO2(g)+6H2O(l)ΔHm=–3120 kJ(3.8.3)
Answer:
52,000 kJ
Explanation:
The combustion reaction is the following:
2 C₂H₆(g) + 7 O₂(g) → 4CO₂(g) + 6H₂O(l) ΔHm= –3120 kJ
From the chemical reaction and the value of ΔH we can see that 2 moles of ethane gas (C₂H₆(g)) release 3120 kJ of heat energy. So, we have the conversion factor: 3120 kJ/2 moles C₂H₆.
To calculate how many kJ are released from the combustion of 1 kg of ethane, we have to first convert the mass to moles by using the molecular weight (MW) of ethane (C₂H₆):
MW(C₂H₆) = (12 g/mol x 2 C) + (1 g/mol x 6 H) = 30 g/mol
mass = 1 kg x 1000 g/1 kg = 1000 g
moles of C₂H₆= mass/MW = 1000 g/(30 g/mol) = 33.3 mol C₂H₆
Finally, we multiply the conversion factor by the number of moles of C₂H₆ in 1 kg:
heat energy released = 33.3 mol C₂H₆ x 3120 kJ/2 moles C₂H₆ = 52,000 kJ
Therefore, 51,000 kJ are released when 1 kg of ethane is burned.
help help help help help help
Answer:
your answer is B, your graph is constant from there, therefore the pattern is uniform (orderely).
what one plus one
is it two three four five
Answer:
Two, I'd say, unless there's some trick to what you're asking! :)
Explanation:
Answer:
eleven
Explanation:
combine numbers together
1 + 1
1 + 1
1 + 1
1+1
11
--------------------------------------------------------
just kidding LOL
answer is 2
What is metallurgy ?
Answer:
according to the Oxford dictionary, metallurgy the branch of science and technology concerned with the properties of metals and their production and purification
Explanation:
Explanation:
The entire scientific and technological process used for isolation of the metal from its ores is known as metallurgy.
Hey stan.
Hope it's help ^_^
Which of the following elements are metals?
A.
fluorine (F) and argon (Ar)
B.
iodine (I) and carbon (C)
C.
oxygen (O) and selenium (Se)
D.
potassium (K) and chromium (Cr)
Answer:
its D. potassium and chromium
Answer:
option d
Explanation:
potassium and chromium
The hydrogen ion concentration of a fruit juice is 2.5 x 10-5 M. What is the pH of the juice?
4.6 is the pH of the juice if hydrogen ion concentration of a fruit juice is 2.5 x 10-5 M.
What is pH?pH is the measure of acidity or alkalinity of a solution.
It is measured by taking negative logarithm of hydrogen ion concentration.
pH = -log [[tex]H^+[/tex]]
Given [tex][H^+][/tex] = 2.5 x [tex]10^-^5[/tex] M.
pH = -log [ 2.5 x [tex]10^-^5[/tex] M]
pH = 4.6
Hence, 4.6 the pH of the juice.
Learn more about pH here:
https://brainly.com/question/15071681
#SPJ2
56. Explain Why is the chemical composition of
water (H2O) always the same?
Answer:
because it's water chemical bonds form when atoms share electrons and example of a chemical compound is water a water molecule forms when oxygen and hydrogen atoms react and are held together by covalent bonds like other compounds water always has the same chemical composition a ratio of two one of hydrogen atoms to oxygen atoms
The reason of why the chemical composition of water should be the same should be explained below.
Reason of the chemical composition:Since it contain the water chemical bond at the time when the atom should share electrons.
And the example of the chemical compound represent the water that shows the water molecule created at the time when the oxygen and the hydrogen reacted and it could be together via the covalent bonds.
learn more about water here: https://brainly.com/question/3102539
What process makes 2 ATP?
Anaerobic respiration results in the production of 2 ATP molecules.
What is anaerobic respiration?Anaerobic respiration is the use of electron acceptors other than molecular oxygen in respiration. Despite the fact that oxygen is not the ultimate electron acceptor, the process employs a respiratory electron transport chain. When there is insufficient oxygen for some species to respire, they still require energy to survive. Due to a lack of oxygen, they respire in the absence of oxygen to create the energy they require, which is known as anaerobic respiration. While most aerobic respiration (with oxygen) occurs in the cell's mitochondria, anaerobic respiration (without oxygen) occurs in the cytoplasm.
Here,
Two ATP molecules are created during anaerobic respiration.
To know more about anaerobic respiration,
https://brainly.com/question/12605249
#SPJ4