Like every Canadian couple, Monir and Jackle carry quite a lot of debt, despite their high
income. Both lease their cars at a combined cost of $2,300 a month. Their recently-built
house carries a $1,000,000 mortgage at a rate of 2.4%, 5-year term, with monthly
payments over 25 years. Theirs was not a conventional mortgage, but a high-ratio
mortgage at a 90% loan-to-value ratio. Other monthly debt charges (line of credit, credit
Page 7 of 13
card, etc.) amount to $5,000 a month. Municipal taxes and heating costs amount to
$900 a month. They were First Time Home Buyers.
The couple chose to add the CMC mortgage loan insurance to their $1,000,000 fixed
rate mortgage. However, had they paid the insurance off up-front, how much total
interest would they have saved over 25 years?

Answers

Answer 1

Monir and Jackie recently built a house carrying a $1,000,000 mortgage at a rate of 2.4 percent, 5-year term, with monthly payments over 25 years, which is not a conventional mortgage, but a high-ratio mortgage at a 90 percent loan-to-value ratio.

Other monthly debt charges amount to $5,000 per month. Municipal taxes and heating costs amount to $900 per month. They chose to add the CMC mortgage loan insurance to their $1,000,000 fixed-rate mortgage. The couple would have saved $27,000 in total interest over 25 years if they had paid the CMC mortgage loan insurance off up-front.

Monir and Jackie recently built a house carrying a $1,000,000 mortgage at a rate of 2.4 percent, 5-year term, with monthly payments over 25 years, which is not a conventional mortgage, but a high-ratio mortgage at a 90 percent loan-to-value ratio. Other monthly debt charges amount to $5,000 per month. Municipal taxes and heating costs amount to $900 per month. They chose to add the CMC mortgage loan insurance to their $1,000,000 fixed-rate mortgage.The total cost of combined lease of cars is: $2300 per month. Total Monthly debt charges (line of credit, credit card, etc.) = $5,000 per month.

Municipal taxes and heating costs = $900 per month. Total Expenses= $2300 + $5000 + $900 = $8200 per month. Now, First Time Home Buyers chose to add the CMC mortgage loan insurance to their $1,000,000 fixed-rate mortgage. So, interest is calculated on $1,000,000 mortgage for 25 years at 2.4% per annum, compounded semi-annually. Without paying off insurance: Let's calculate the monthly mortgage payment and interest paid per month.

Total interest paid in 25 years= $603,207.12Total mortgage payment in 25 years= $1,603,207.12. With paying off insurance: The mortgage loan insurance is 3.85% of the mortgage amount and is added to the mortgage balance. The insurance premium is, therefore, $38,500.The total mortgage amount is now $1,038,500, and interest is calculated on this amount for 25 years at 2.4% per annum, compounded semi-annually. Let's calculate the monthly mortgage payment and interest paid per month.

Total interest paid in 25 years= $576,074.16. Total mortgage payment in 25 years= $1,576,074.16.

Total interest saved in 25 years = $603,207.12 - $576,074.16 = $27,132.Therefore, Monir and Jackie would have saved $27,132 in total interest over 25 years if they had paid the CMC mortgage loan insurance off up-front.

To know more about mortgage please check the following link

https://brainly.com/question/31751568

#SPJ11


Related Questions

Ignore VAT Worldwood Furniture, a company based in Salt River, buys and sells high quality furniture. The company consistently applies a mark-up on cost of 60%. The business's financial year ended on 31 March 2019. On 3 March 2019 Worldwood sent furniture, with a sales value of R65 000, on consignment to Furniture Warehouse. The agreement states that a 25% commission is payable by Worldwood, which is paid in the month following the month of sale. During March 2019 Furniture Warehouse sold R20 000 of the consignment furniture, all for cash. On 25 March 2019, a customer in Durban ordered furniture (FOB shipping point) from Worldwood. Worldwood's cost of this furniture is R9 375. The furniture was loaded onto Worldwood's delivery van at 8:00am on 31 March 2019 and arrived at Cape Town Station at 8:30am on 1 April 2019. The furniture arrived at Durban station on 3 April 2019 . The cost of the rail transport amounted to R3 200 and was paid by Worldwood on 27 March 2019. This furniture had not been included in Worldwood's inventory count on 31 March 2019. An inventory count, at the premises of Worldwood Furniture, on 31 March 2019 established that inventory on hand amounted to R113 000. You are required to: a) Prepare the general journal entry/ies recorded by Furniture Warehouse for the sale of the consignment inventory during March 2019. Ignore dates and narrations. b) Prepare the general journal entry/ies recorded by Worldwood Furniture for the sale of the furniture to the customer in Durban. Ignore narrations. c) Discuss whether Worldwood Furniture will recognise the unsold consignment furniture at the premises of Furniture Warehouse as an asset as at 31 March 2019 . Your answer should be supported by the asset definition and recognition criteria as outlined in the Conceptual Framework. d) Calculate the amount at which inventory will be reported in the statement of financial position of Worldwood Furniture as at 31 March 2019.

Answers

a) Furniture Warehouse:

Cash $20,000, Commission Payable $5,000, Inventory $15,000.

b) Worldwood Furniture:

Accounts Receivable $9,375, Sales Revenue $9,375, Cost of Goods Sold $6,000, Inventory $6,000.

c) Unsold consignment furniture cannot be recognized as an asset until it is sold.

d) Inventory reported as of 31 March 2019: $107,000.

a) The general journal entry recorded by Furniture Warehouse for the sale of the consignment inventory during March 2019 would be:

Cash (Revenue)                     20,000

Commission Payable (Expense)  5,000

Inventory (Asset)                      15,000

b) The general journal entry recorded by Worldwood Furniture for the sale of the furniture to the customer in Durban would be:

Accounts Receivable (Asset)             9,375

Sales Revenue (Revenue)                  9,375

Cost of Goods Sold (Expense)          6,000

Inventory (Asset)                              6,000

c) According to the Conceptual Framework, an asset is a resource controlled by an entity as a result of past events, from which future economic benefits are expected to flow to the entity. To recognize the unsold consignment furniture as an asset, Worldwood Furniture must have control over the furniture and expect economic benefits from its sale.

In this case, the furniture is sent on consignment to Furniture Warehouse, which means Worldwood still retains ownership and control over the furniture. However, since the furniture has not been sold by the end of the financial year (31 March 2019), it is not considered a sale and Worldwood cannot recognize the unsold consignment furniture as an asset in their own financial statements. It remains as part of their inventory until it is sold.

d) The amount at which inventory will be reported in the statement of financial position of Worldwood Furniture as at 31 March 2019 would be the inventory on hand after deducting the cost of goods sold.

Inventory reported = Inventory on hand - Cost of goods sold

Inventory reported = R113,000 - R6,000 (cost of goods sold to Durban customer)

Inventory reported = R107,000

learn more about "Sales ":- https://brainly.com/question/25743891

#SPJ11

1. Which one of the five planning pitfalls entrepreneurs often encounter do you think is the highest priority to avoid? Which one is the lowest priority? Why? Five planning pitfalls: 1. No realistic goals-There may be a lack of attainable goals, lack of a time frame to accomplish things, lack of priorities, and a lack of action steps. 2. Failure to anticipate roadblocks-The entrepreneur is so immersed in his or her owridea that objectivity goes out the window. 3. No commitment or dedication-Too many entrepreneurs appear to lack real commitment to their venture. possesses. 5. No market niche-Many entrepreneurs propose an idea without really finding out who the potential customers are going to be.

Answers

The highest priority pitfall that entrepreneurs need to avoid is failure to anticipate roadblocks. When an entrepreneur is so immersed in his or her own idea that objectivity goes out the window.

They may find it difficult to anticipate the possible obstacles that may arise. This may lead to failure in the long run and is a pitfall that should be avoided.The lowest priority pitfall is no market niche.

This is because a market niche can always be found even if the initial idea doesn't fit perfectly. Finding a market niche is essential, but it can be done after the initial idea is developed. On the other hand, failing to anticipate roadblocks can have severe consequences and may lead to failure.

Entrepreneurs need to take the time to research, analyze and evaluate their ideas to identify potential roadblocks. They should also seek outside advice from professionals and experts in the industry. By doing so, they can anticipate and plan for the potential obstacles that may arise in the future and take steps to mitigate or avoid them.

To know more about entrepreneurs visit:

https://brainly.com/question/31010585

#SPJ11

Imagine / assume you are running a Manufacturing firm with a capital of $100,000− 1,000,000 in Fujairah UAE. You are free to assume / invest within the range of $100,000−$ 1,000,000, depending on the size of the firm. The total cost of the firm is 2,500,000. With this assumption you are required to prepare the Cost Sheet of the firm Further requirements: 1. Assume the administrative cost of the firm with in the range of $200,000 to 400,000 2. Selling and distribution overheads are $350,000 3. You can select an amount of Opening stock of finished goods within a range of $10,000 to $20,000 4. You can select an amount of WIP opening and closing with in a range of $15000 to $ 25000. 5. Analyze the differences in between the Manufacturing cost related to managerial accounting and Administrative cost related to financial accounting as well as the effect of these costs on your cost sheet. 6. Give recommendations on the basis of your findings and conclusions to the firm, how they can increase their profit margin?

Answers

Manufacturing costs directly relate to production, while administrative costs cover overall operational expenses. To increase profit margin, focus on cost reduction, pricing analysis, operational efficiency, sales improvement, R&D investment, and financial analysis.

Cost Sheet of the Manufacturing Firm in Fujairah, UAE:

Assumed Capital: $100,000 - $1,000,000

Total Cost of the Firm: $2,500,000

Opening Stock of Finished Goods: $10,000 - $20,000

WIP Opening: $15,000 - $25,000

Manufacturing Costs:

- Direct Materials: $XXX

- Direct Labor: $XXX

- Factory Overhead: $XXX

Total Manufacturing Costs: $XXX

WIP Closing: $15,000 - $25,000

Cost of Goods Manufactured: Total Manufacturing Costs + WIP Opening - WIP Closing

Cost of Goods Manufactured: $XXX

Administrative Cost: $200,000 - $400,000

Selling and Distribution Overheads: $350,000

Total Cost: Cost of Goods Manufactured + Administrative Cost + Selling and Distribution Overheads

Total Cost: $2,500,000

Differences between Manufacturing Cost and Administrative Cost:

Manufacturing costs, related to managerial accounting, include direct materials, direct labor, and factory overhead. These costs are directly associated with the production process and can be traced to specific products. They are essential for determining the cost of goods manufactured.

Administrative costs, related to financial accounting, encompass expenses such as salaries, rent, utilities, and other administrative expenses. These costs are not directly tied to the production process but are necessary for the overall operation of the firm.

Effect on Cost Sheet:

The manufacturing costs impact the cost of goods manufactured, which directly affects the cost of finished goods. Administrative costs, along with selling and distribution overheads, are included in the total cost of the firm.

Recommendations to Increase Profit Margin:

1. Cost Reduction Strategies: Analyze manufacturing costs and identify areas where cost reductions can be made without compromising quality. This could involve optimizing production processes, negotiating better deals with suppliers, or implementing lean manufacturing techniques.

2. Pricing Analysis: Evaluate pricing strategies to ensure they reflect the true cost of production and align with market demand. Consider conducting a comprehensive pricing analysis to identify optimal pricing levels that maximize profit margins.

3. Improve Operational Efficiency: Identify areas where operational efficiency can be improved, such as reducing waste, streamlining processes, and optimizing resource allocation. This can help reduce manufacturing costs and increase overall profitability.

4. Enhance Sales and Distribution Channels: Invest in marketing efforts to increase brand visibility and expand customer reach. Explore opportunities to enhance sales and distribution channels, such as leveraging digital platforms or forming strategic partnerships.

5. Research and Development: Allocate resources towards research and development to drive innovation and introduce new, high-value products or product enhancements. This can help differentiate the firm in the market and command premium pricing.

6. Continuous Financial Analysis: Regularly monitor and analyze financial performance, including cost patterns, profitability ratios, and cash flow management. This will provide insights into areas that need improvement and guide decision-making to optimize profit margins.

By implementing these recommendations, the manufacturing firm can enhance operational efficiency, control costs, and strategically position itself for increased profitability.

learn more about "expenses":- https://brainly.com/question/14697297

#SPJ11

If a company’s total fixed cost increases by $40,000, which of the following will be true?
A.
The break-even point will be unchanged.
B.
The contribution margin ratio will increase.
C.
The break-even point will increase.
D.
The contribution margin ratio will decrease

Answers

In this scenario, the company’s total fixed cost increased by $40,000, which means the company's break-even point will increase. option C is the correct.

The break-even point is that level of sales, where the total costs equal total sales revenue and the company neither earns a profit nor suffers a loss. There are two types of costs in accounting, fixed costs and variable costs. Fixed costs are constant regardless of the sales level, while variable costs change as the sales level changes.

When fixed costs increase, more sales revenue is required to cover the fixed costs and reach the break-even point. The contribution margin ratio will not change in this case.The contribution margin ratio is the percentage of each sales dollar that is available to cover fixed costs and then provide profit. The contribution margin ratio is calculated by dividing the contribution margin by sales revenue.

The contribution margin ratio is a measure of a company’s profitability. The contribution margin ratio indicates how much money is available to cover fixed costs and then provide profit from each dollar of sales. It does not change if the fixed cost increases by $40,000. Hence, option C is the correct answer. The increase in the fixed cost will result in a higher break-even point, and the contribution margin ratio will remain the same.

Know more about the break-even point

https://brainly.com/question/30663687

#SPJ11

Penny Pincher is paid 50c for each towel she weaves, but she is guaranteed a minimum wage of $60 for a 40 hour week. In a series of four weeks, she makes 100, 120, 140 and 160 towels.
Required
Calculate her pay each week, and the conversion cost per towel if production overhead is added at the rate of $2.50 per direct labour hour.

Answers

The conversion cost per towel, considering the production overhead rate of $2.50 per direct labor hour, cannot be determined without knowing the number of direct labor hours required to weave a towel.

To calculate Penny Pincher's pay each week, we need to consider two scenarios: when her earnings based on the number of towels exceed the minimum wage, and when they fall below it.

In the first week, Penny makes 100 towels, earning 50c per towel. Her total earnings for that week are 100 towels * $0.50 = $50, which is below the minimum wage of $60. Therefore, she is paid the minimum wage of $60.

In the second week, Penny makes 120 towels, earning 120 towels * $0.50 = $60. Since this amount matches the minimum wage, she is paid $60.

In the third week, Penny makes 140 towels, earning 140 towels * $0.50 = $70, which exceeds the minimum wage. Hence, she is paid $70.

In the fourth week, Penny makes 160 towels, earning 160 towels * $0.50 = $80. Again, her earnings exceed the minimum wage, so she is paid $80.

Now let's calculate the conversion cost per towel by factoring in the production overhead of $2.50 per direct labor hour. The number of direct labor hours required to weave a towel is not provided, so we cannot determine the exact conversion cost per towel without that information.

However, if we assume that each towel takes 1 hour to weave, the conversion cost per towel would be $2.50. This calculation is made by multiplying the production overhead rate by the number of direct labor hours, which in this case is 1 hour: $2.50 * 1 hour = $2.50.

To learn more about conversion cost

https://brainly.com/question/28180425

#SPJ11

Consider a credit card with a balance of $7500 and an APR of
16.99%. In order to pay off the balance in 2 years, what monthly
payment would you need to make? Round your answer to the nearest
cent, if

Answers

The credit card balance is $7500, and the APR is 16.99%. To pay off the balance in 2 years, the monthly payment needs to be determined.

The formula for calculating monthly payment is:P = (r * A) / (1 - (1 + r)^(-n))where P is the monthly payment, r is the monthly interest rate, A is the balance, and n is the number of payments.For monthly payments, the monthly interest rate is calculated by dividing the annual percentage rate (APR) by the number of months in a year.

So, the monthly interest rate is: r = APR/12 = 16.99%/12 = 0.0141583Next, the number of payments n will be equal to the total number of months. Since there are 2 years, i.e., 24 months, the value of n is 24. Now, we can calculate the monthly payment using the above formula:

[tex]P = (r * A) / (1 - (1 + r)^(-n))= (0.0141583 * 7500) / (1 - (1 + 0.0141583)^(-24))= 343.04[/tex]

The monthly payment that needs to be made to pay off the credit card balance of $7500 at an APR of 16.99% in 2 years is $343.04 (rounded to the nearest cent).

To know more about determined visit:

brainly.com/question/29898039

#SPJ11

Discuss market segmentation by describe step(brainstorm,Narrow, primary market research) with example in entrepreneurship.

Answers

Market segmentation is a process that divides a market into subgroups of customers who have similar interests and needs. In order to identify the target market, three steps must be taken: brainstorming, narrowing, and primary market research.

An entrepreneur should follow these three steps in order to segment their target market. Step 1: Brainstorming In this step, an entrepreneur should brainstorm and come up with ideas on how to divide the market into smaller segments.  By doing this, the business will be able to create marketing campaigns that will appeal to each segment. Step 2: Narrowing After brainstorming, the next step is to narrow down the segments into smaller, more defined groups. In this step, an entrepreneur should consider the needs, interests, and characteristics of the customers in each segment. Step 3: Primary Market Research In this step, an entrepreneur should conduct primary market research to gather more information about each segment.

By following these three steps, an entrepreneur can create a successful marketing campaign that will target specific segments of the market. This will help to increase sales and improve customer satisfaction.

To know more about Market Segmentation visit-

https://brainly.com/question/28067681

#SPJ11

Given below are the market demand and the corresponding marginal cost and average cost functions for a competitive market. P=500−3Q
MC=AC=75

a) Find the equilibrium price and quantity for this perfectly competitive market. b) Suppose the firms decide to merge and create a monopoly. The formation of this monopoly leads to better efficiency in production, reducing the marginal cost and average cost to $50. What would be the new quantity produced and price? c) What would be the net effect on societal welfare after this merger? Would the government allow such a merger to happen? Explain. d) What would have to be the reduction in marginal cost (or the new marginal cost) in which society would have no change in welfare due to the merger?

Answers

Equilibrium price: When Quantity Demanded(QD) = Quantity Supplied(QS)P = 500 - 3QP = 500 - 3 * 83 = 251Q = 83

b) New quantity produced and price: Under the monopoly, the quantity produced will be where MC=MR.P=MC(1+1/e)Where e is the price elasticity of demand. e = 1 + 1 / (500 - 3Q)Q = 111.11, P = 277.78c)

Net effect on societal welfare: Under the competitive market, consumer surplus = $31,944.44 and producer surplus = $13,888.89, and total surplus = $45,833.33.

Under monopoly, consumer surplus = $12,346.94, producer surplus = $28,799.27, and total surplus = $41,146.21.Therefore, the net effect on societal welfare after the merger is negative as total surplus decreases.

The government would not allow such a merger to happen because of the negative impact on social welfare. d) Reduction in marginal cost to society have no change in welfare: Reduction in marginal cost to $58.33 would be required to make the total surplus equal to the competitive market, and societal welfare would remain the same due to the merger.

To know more about Quantity Demanded refer here : brainly.com/question/12538447

#SPJ11

The free cash flow to the firm is reported as $300 million. The interest expense to the firm is $12 million. The tax rate is 30% and the net debt of the firm decreased by $35 million. Compute the FCFE (Free cash flow to equity). $302.7 million \$283.4 million $326.6 million $256.6 million None of the above You observe the following information: The variance of portfolio X is 0.25; the market portfolio's variance is 0.04; the covariance between portfolio X and the market is 0.09. Compute the CAPM beta for portfolio X. 2.25 0.42 3.12 0.06 None of the above

Answers

The CAPM beta for portfolio X is 2.25. Thus, option A) 2.25 is the correct answer.

Free cash flow to the firm (FCFF) is reported as $300 million. The interest expense to the firm is $12 million. The tax rate is 30%, and the net debt of the firm decreased by $35 million. We need to compute the free cash flow to equity (FCFE).

The FCFE can be computed as follows:

FCFE = FCFF - [interest × (1 - tax rate)] + net borrowing

Given:

FCFF = $300 million

Interest expense = $12 million

Tax rate = 30%

Net borrowing = decrease in net debt = $35 million

Substituting the values:

FCFE = $300 million - [$12 million × (1 - 0.30)] + $35 million

= $326.6 million

Therefore, the FCFE is $326.6 million.

The correct option is C) $326.6 million.

The variance of portfolio X is 0.25. The market portfolio's variance is 0.04. The covariance between portfolio X and the market is 0.09. We need to compute the CAPM beta for portfolio X.

Beta of a stock is given by the following formula:

Beta = Covariance with the market / Variance of the market

The beta of portfolio X can be computed using the above formula as follows:

Beta = 0.09 / 0.04

= 2.25

Therefore, the CAPM beta for portfolio X is 2.25.

Thus, option A) 2.25 is the correct answer.

Learn more about interest expense

https://brainly.com/question/29492215

#SPJ11

Marginal choices or decisions Select one: a. involve additions to (or subtractions from) the current conditions. b. are the same as average choices. c. are bad or poor choices. d. always involve money. e. never involve money. Other things remaining the same, if the tax exemption for dependent children is raised in the U.S., what will tend to happen over time? Select one: a. The birth rate will fall, as having children will cost less. b. The birth rate will rise, as having children will have a lower benefit. c. The birth rate will be unaffected, since no one considers the money costs and benefits when deciding to have children. d. The birth rate will fall, as having children will have a lower benefit. e. The birth rate will rise, as having children will cost less.

Answers

Marginal choices or decisions involve additions to (or subtractions from) the current conditions. Hence, option (a) is the correct answer.

This statement means that marginal choices are decisions that deal with how to allocate resources or goods based on the most pressing needs of the time. It includes small adjustments made to the current state of affairs to achieve the desired result. The changes made may be additions to the current system, such as introducing new products or services, or subtractions from the current status quo. Marginal choices are the same as average choices, hence option (b) is incorrect.Other things remaining the same, if the tax exemption for dependent children is raised in the U.S., the birth rate will rise, as having children will cost less.

This is because the tax exemption for dependent children encourages parents to have more children by reducing the cost of raising them. Therefore, the correct answer is an option (A).

To learn more about marginal choices, visit here

https://brainly.com/question/28258025

#SPJ11

For EACH of the following information systems, describe its key characteristics and discuss the extent to which it can support the management of the Human Resources (HR) function within an organisation.
a) Enterprise Resource Planning (ERP) system;
b) Group Decision Support System (GDSS);
c) Expert system.
[
Question 4
a) Discuss the impact of Social Media on the future development of corporate Management Information Systems (MIS).

Answers

While each of the mentioned information systems has different characteristics and purposes, they can all support the management of the HR function within an organization to varying extents. An ERP system provides comprehensive tools for managing HR processes and employee data. A GDSS enables collaborative decision-making in HR-related discussions. An expert system leverages expert knowledge to provide valuable insights and recommendations in HR management.

a) Enterprise Resource Planning (ERP) system:
- Key characteristics: An ERP system is an integrated software solution that manages various business functions, such as accounting, finance, human resources, inventory, and sales. It provides a centralized database and a suite of applications to streamline and automate business processes.
- Support for HR management: An ERP system can greatly support the management of the HR function within an organization. It allows HR professionals to efficiently handle employee data, such as payroll, benefits, performance reviews, and training records. With a centralized database, HR personnel can easily access and update employee information, ensuring accurate and up-to-date records. The system also provides functionalities for managing recruitment, onboarding, and employee self-service portals, enhancing the overall HR management process.

b) Group Decision Support System (GDSS):
- Key characteristics: A GDSS is a computer-based system that facilitates group decision-making by providing tools and processes to aid in problem-solving and decision-making activities. It enables individuals in a group to collaborate, share information, and reach consensus.
- Support for HR management: While a GDSS is not specifically designed for HR management, it can still support certain aspects of the HR function within an organization. For instance, in HR decision-making processes, such as evaluating candidates for a job position or discussing strategic HR initiatives, a GDSS can facilitate collaboration and enhance the quality of decision-making by allowing multiple stakeholders to contribute their perspectives, share relevant information, and analyze alternatives together. This can lead to more informed and well-rounded HR decisions.

c) Expert system:
- Key characteristics: An expert system is a computer-based system that utilizes knowledge and reasoning techniques to provide expert-level advice or solutions in a specific domain. It captures and applies the expertise of human experts to solve complex problems.
- Support for HR management: An expert system can support HR management by providing valuable insights and recommendations in areas where expert knowledge is required. For example, an expert system can assist in recruitment and selection processes by analyzing job requirements, evaluating resumes, and recommending the most suitable candidates based on predefined criteria. It can also provide guidance in employee performance evaluations or career development planning by applying expert knowledge and best practices. The use of an expert system in HR management can enhance decision-making, reduce bias, and ensure consistency in the application of HR policies and procedures.

To learn more about Enterprise Resource Planning, visit:

https://brainly.com/question/30465733

#SPJ11

Archipelago Smith’s bank account reflecting the transactions for the financial year ended December 31, 2014 is reported below. He has lost his financial statements in a flood and is asking his newly employed accounting officer to prepare the financial statements. Debit $ Credit $ Trade debtors 2,500,000 Rent 900,000 Cash sales 2,300,000 Loan 900,000 Fee income (2013) 1,800,000 Salaries 950,000 Loan 4,500,000 Utilities 720,000 Interest income 150,000 Maintenance 120,000 Rent 750,000 Accounting fees (2013) 450,000 Bad debt recovered 430,000 Cash purchases 550,000 Trade creditors 1,000,000 Equipment 270,000 12,430,000 5,860,000 (1) The bank balance on January 1, 2014 is a favourable $4,570,000. (2) The business benefitted from discounts amounting to $300,000 from its creditors and gave discounts amounting to $200,000 to its credit customers. (3) Credit customers returned goods valued at $130,000 to Archipelago Smith and Archipelago returned goods valued at $220,000 to his creditors. (4) The closing debtors balance includes a bad debt of $150,000 (5) Archipelago paid $20,000 out of his cash sales for repairs before lodging the remainder. (6) Archipelago owed Christus Jesu $170,000 and Christus Jesu owed Archipelago $100,000. (7) It was agreed that Archipelago would pay Santus Benedictus a commission of 4% of the net profit after charging the commission. (8) Archipelago Smith borrowed $4,500,000 on May 1, 2014 at a rate of 20% per annum. The repayment of principal is to be made in five (5) equal tranches. The first payment is to be made on November 1, 2014 and the subsequent payments on that same date in 2015, 2016,2017 and 2018. The interest is to be paid on January 2, 2015. (9) Accounting fees fees are estimated at $ 650,000 at December 31, 2014. (10) An excerpt of the Balance Sheets as at December 31, 2013 and 2014 is outlined below: 2014 2013 Plant and Machinery 1,600,000 2,000,000 Stock 1,000,000 800,000 Trade debtors 2,000,000 600,000 Interest income receivable 125,000 150,000 Short term investment 9,900,000 9,900,000 Trade creditors 2,450,000 1,500,000 Utilities owing 100,000 50,000 (11) Equipment was purchased on April 1, 2014. Archipelago uses the straight line method of depreciation and the applicable rate of depreciation is 20% Required: (i) Prepare the Statement of Affairs at January 1, 2014 (6 marks) (ii) Prepare the Trade debtors control account (7 marks) (iii) Prepare the Trade creditors control account (6 marks) (iv) Prepare the Income Statement for the year ended December 31, 2014 (12 marks) (v) Prepare the Balance Sheet as at December 31, 2014 (9 marks)

Answers

(i) Statement of Affairs at January 1, 2014:

Debit $ Credit $ Cash at bank 4,570,000

Liabilities: Short-term loan 4,000,000

Trade creditors 1,000,000 Net assets 570,000 5,570,000 5,570,000

(ii) Trade debtors control account:

Debit $ Credit $ Balance b/d 600,000 Sales 2,300,000 Bad debt (150,000) Returns inward (130,000) Cash 2,250,000 Balance c/d 2,070,000 4,750,000 4,750,000

Trade debtors control account for Archipelago Smith’s bank account reflecting the transactions for the financial year ended December 31, 2014.

Archipelago Smith is reported below. He has lost his financial statements in a flood and is asking his newly employed accounting officer to prepare the financial statements

.(iii) Trade creditors control account:

Debit $ Credit $ Balance b/d 1,500,000 Purchases 550,000 Returns outward 220,000 Discount received 300,000 Cash 1,030,000 Balance c/d 1,670,000 3,000,000 3,000,000

(iv) Income statement for the year ended December 31, 2014:

Debit $ Credit $ Trading Account: Cash sales 2,300,000 Cash purchases 550,000 Less cost of goods sold (800,000) Gross profit 2,050,000 Expenses: Rent 900,000 Salaries 950,000 Utilities 720,000 Maintenance 120,000 Accounting fees 200,000 Depreciation 80,000 Interest expense 900,000 Commission 45,000 Bad debt recovered (430,000) (1,605,000) Net profit 445,000

(v) Balance sheet as at December 31, 2014:Debit $ Credit $ Non-current assets: Plant and machinery 1,600,000 Equipment 216,000 1,816,000

The Statement of Affairs is a financial statement which lists the business's assets, liabilities, and net worth, while the Income Statement is a financial statement that summarizes the business's income and expenditures for a certain period.

Finally, the Balance Sheet is a financial statement that reports a company's financial position at a particular point in time.

To know more about Affairs visit :

https://brainly.com/question/472544

#SPJ11

Identify a small or medium scale manufacturing or service firm in your neighborhood. Interview the worker or owner with experience on the operations of the firm and provide answers to the following questions:
I. What does the operations of the firm entails?
II. How do they decide on the demand for quantity of goods or services they offer?
III. How do they manage their inventory?
IV. What informed their facility location?
V. What service or products are they capable to offer customers?
VI. How do they ensure quality of products and services?
VII. What skills should an operations manager (or related position) has for effective management?
VIII. What skills should an undergraduate student develop to qualify him/her to work as an operations manager of the firm?

Answers

As an AI language model, I do not have the capability to interview someone in person, but I will provide a sample answer to the questions based on a small scale business that you can use to complete your task.

The small scale manufacturing firm in my neighborhood is a candle production business. I had the opportunity to interview the owner on the operations of the firm and below are the answers to the questions.

I. What does the operations of the firm entails?
The operations of the firm entail making candles in different sizes and shapes. They source for raw materials, manufacture, package and sell the candles. The firm also receives orders for custom candles, which they design and produce to meet the specifications of their customers.

II. How do they decide on the demand for the quantity of goods or services they offer?
The firm determines the quantity of candles to produce based on the demand for the products. They review their sales data to determine the highest selling candles and produce more of those candles to meet demand. They also analyze customer reviews and feedback to identify trends in customer demand and make decisions based on that.

To know more about language visit:

https://brainly.com/question/32089705

#SPJ11


Gale Company
This is a listed company selling luxurious European furniture and is a major player in the market. The furniture industry has been adversely affected by the soaring housing prices where people cannot afford the property and hence the luxurious furniture. The revenue of in current year dropped by 30% and resulted in a net loss for the year of $16 million. The board of directors announced no dividend will be distributed this year.
Due to its aggressive expansion plan in the past few years, the company has incurred significant bank loans, resulting in a net current liability of $6 million in current year. The management decided to shut down eight out of twelve furniture stores in Hong Kong in order to reduce the operating expenses.
Required:
a.Explain the going concern assumption and describe your responsibility towards it.
b.Identify three indicators suggesting that Gale Company may have going concern problem.

Answers

The three indicators suggesting that Gale Company may have a going concern problem are the significant drop in revenue and net loss, the net current liability and bank loans, and the store closures to reduce operating expenses.

A. The going concern assumption is an accounting principle that assumes a company will continue its operations in the foreseeable future and will not liquidate or cease operations.

As an accountant or financial professional, my responsibility towards the going concern assumption is to assess whether there are any indications or factors that may cast significant doubt on the company's ability to continue operating.

To fulfill this responsibility, I would evaluate the company's financial statements, projections, and other relevant information to determine if there are any significant events or conditions that may indicate a going concern problem.

If such indicators exist, I would need to disclose them in the financial statements and ensure that appropriate measures are taken to address the situation.

B. Three indicators suggesting that Gale Company may have a going concern problem are:

A significant drop in revenue and net loss: The 30% drop in revenue and resulting net loss of $16 million indicate a decline in the company's financial performance.

This could be attributed to the adverse impact of soaring housing prices, which limits customers' ability to afford luxurious furniture. Such a significant decline in financial results raises concerns about the company's ability to generate sufficient cash flow to meet its obligations.

Net current liability and bank loans: The company's net current liability of $6 million and the significant bank loans indicate a strain on its financial position.

This suggests that the company may face challenges in meeting its short-term obligations, including loan repayments and other current liabilities. It raises doubts about the company's ability to manage its financial obligations in the near term.

Store closures to reduce operating expenses: The decision to shut down eight out of twelve furniture stores in Hong Kong indicates that the company is taking measures to reduce operating expenses.

While cost-cutting measures are common during challenging times, such closures may also imply that the company is struggling to maintain its operations and requires significant cost reductions to stay afloat. This action further raises concerns about the company's viability in the long term.

To learn more about revenue

https://brainly.com/question/16232387

#SPJ11

China has been experiencing periodic water shortages (see article below). Economic analysis suggests that the policy of raising the price of water in certain cities would hav which of the following effects: A. Decrease the demand for water B. Decrease the quantity demanded of water C. Increase the incentive to transport water to the cities that are raising their price a. A only b. B only c. A and C d. B and C BEIJING - Cities across China are raising the price of water in moves that try to balance the need to conserve an increasingly scarce resource with the effects on a public used to low fees. The city government of Luoyang, in central Henan province, prepared to hold a public meeting Friday to argue for a proposed water price increase of 40% to 48%. Water prices in the dry region haven't risen since 2003, which the government says is exhausting meager supplies and keeping the local water utility in the red. At least half a dozen other major cities have raised water prices in the past few months. The changes reflect a growing official consensus that low prices are part of China's water shortage, since they give companies and households little incentive to use water carefully. The government is also spending billions of dollars on a controversial system of canals to divert water from the floodprone south to the dry north.

Answers

China has been experiencing periodic water shortages. Economic analysis suggests that the policy of raising the price of water in certain cities would have which of the following effects:

A. Decrease the demand for water

B. Decrease the quantity demanded of water

C. Increase the incentive to transport water to the cities that are raising their price.

The correct option is D. B and C, Explanation: The demand for water can be calculated using the formula: Qd = a - bP, where P is the price of water, Qd is the quantity demanded, a is the quantity demanded if the price of water is zero, and b is the slope of the demand curve. If the price of water is increased, the quantity demanded of water will decrease. The price elasticity of demand for water is low in the short run but high in the long run. As a result, an increase in the price of water will lead to a decrease in the quantity demanded of water. As a result, option B is correct.

In conclusion, an increase in the price of water in cities will reduce the quantity demanded of water and increase the incentive to transport water to the cities that are raising their price. Thus, option D is correct.

To know more about Economic visit:

https://brainly.com/question/32861646

#SPJ11

The U.S. economy is starting to find its way through the economic turmoil caused by the pandemic. Government policy was very active with both monetary policy and fiscal policy attempting to keep the economy moving during the pandemic. We are starting to see some of the effects of those policies. Analyze the effects of monetary and fiscal policies employed during the pandemic.
An analysis of the monetary policy approach the Federal Reserve took to the pandemic
An analysis of the fiscal policy approach the Federal Government took to the pandemic
An analysis of how the attempts to influence GDP in the short-run negatively affect GDP in the long-run
An explanation of why the unemployment rate dropped rapidly in the United States despite low rates of increases in GDP
An identification, as appropriate, of the economic principles (from Module 1) that factor into your analysis

Answers

An analysis of the monetary policy approach the Federal Reserve took to the pandemic:

The Federal Reserve implemented an expansionary monetary policy to counter the economic turmoil caused by the pandemic. It took several key actions, including lowering the federal funds rate to near-zero, implementing quantitative easing (QE) programs, and establishing lending facilities to provide liquidity to financial markets.

Overall, the Federal Reserve's monetary policy actions during the pandemic were instrumental in mitigating the economic impact. By providing ample liquidity and reducing borrowing costs, they supported economic growth, facilitated market functioning, and helped restore confidence.

An analysis of the fiscal policy approach the Federal Government took to the pandemic:

The Federal Government implemented expansionary fiscal policies in response to the pandemic. These policies aimed to provide immediate relief to individuals and businesses, support healthcare systems, and stimulate economic growth. Key fiscal measures included direct payments to individuals, enhanced unemployment benefits, small business loans, and funding for healthcare and vaccine distribution.

By providing direct financial support to individuals and households, fiscal policy helped maintain consumer spending and prevented a sharper decline in aggregate demand. Support to businesses, especially through loan programs, aimed to prevent bankruptcies and job losses.

The fiscal policy approach also included increased government spending on healthcare and vaccine distribution, which helped address the health crisis directly. These measures provided a safety net for those impacted by the pandemic and supported overall economic recovery.

Attempts to influence GDP in the short-run negatively affect GDP in the long-run:

In the short run, attempts to influence GDP through expansionary monetary and fiscal policies can have positive effects on economic growth. By boosting consumer spending, business investment, and overall aggregate demand, these policies can stimulate economic activity and increase GDP.

However, in the long-run, excessive reliance on expansionary policies can lead to negative consequences. Expansionary policies often involve increased government spending, which can result in budget deficits and higher levels of public debt. Over time, high levels of debt can crowd out private investment, increase borrowing costs, and hinder long-term economic growth.

Furthermore, expansionary policies can create inflationary pressures when the economy reaches full capacity. If the increase in aggregate demand outpaces the economy's productive capacity, it can lead to rising prices and erode the purchasing power of consumers.

Therefore, while expansionary policies can be effective in the short-run, a sustainable economic growth path requires a balanced approach that considers long-term fiscal sustainability and avoids excessive inflationary pressures.

Explanation of why the unemployment rate dropped rapidly in the United States despite low rates of increases in GDP:

The unemployment rate dropped rapidly in the United States despite low rates of increases in GDP due to several factors:

1. Labor market dynamics: The unemployment rate is influenced by the number of people actively seeking employment. During the pandemic, many individuals became discouraged and stopped looking for work, leading them to be classified as out of the labor force rather than unemployed. As the economy reopened and businesses resumed operations, these individuals reentered the labor force, reducing the measured unemployment rate.

2. Government support: Expansionary fiscal policies, such as enhanced unemployment benefits, provided income support to individuals who lost their jobs during the pandemic. This support helped alleviate financial hardships and reduced the urgency for some individuals to actively seek employment immediately, thus impacting the unemployment rate.

3. Structural changes: The pandemic triggered shifts in the economy, with certain industries experiencing permanent changes in demand and employment. Some workers displaced from severely affected sectors may have taken longer to find suitable employment in other sectors, causing a lag between GDP growth and unemployment rate improvement.

To know more about Reserve, visit;

https://brainly.com/question/12368300

#SPJ11

The great recent recession, the covid-19 pandemic and the Russian-Ukraine war Economic turmoil from an economic perspective

Answers

From an economic perspective, the great recent recession, the Covid-19 pandemic, and the Russian-Ukraine war have all caused significant economic turmoil. Here is a step-by-step explanation:

1. The Great Recession: The Great Recession, which occurred between 2007 and 2009, was a global economic downturn caused by a combination of factors such as the burst of the housing bubble, financial market instability, and high levels of consumer debt. This led to a severe contraction in economic activity, with declining GDP, rising unemployment rates, and decreased consumer spending. 2. The Covid-19 Pandemic: The Covid-19 pandemic, which began in 2019 and is ongoing, has had a profound impact on the global economy. To contain the spread of the virus, governments implemented lockdown measures, restricting businesses, travel, and daily activities. These restrictions resulted in a sharp decline in economic output, widespread business closures, and mass job losses. Industries such as travel, hospitality, and retail were particularly hard-hit. 3. The Russian-Ukraine War: The Russian-Ukraine war, which started in 2014, has also had economic implications. The conflict disrupted trade relations between the two countries, as well as with their trading partners. This has led to a decline in exports and imports, investment uncertainty, and decreased economic activity in both nations. The war has also affected neighboring countries and regions that have close economic ties with Ukraine and Russia. In summary, the great recent recession, the Covid-19 pandemic, and the Russian-Ukraine war have caused economic turmoil from an economic perspective. These events have resulted in declining GDP, rising unemployment, decreased consumer spending, business closures, and disrupted trade relations

Learn more about Ukraine and Russia:

https://brainly.com/question/26660181

#SPJ11

the statment of retained earnings is used to report:
a) accumalated net profits not paid out in dividends
b) accumalated dividends paid out to shareholders
c) beginning and wnding revenues for the period
d) beginning and ending cash balances
an account starting with a nhmber 1 would indicate:
a) an asset
b) a liability
c) a revenue
d) stockholders equity

Answers

The statement of retained earnings is a financial statement that reports the changes in retained earnings during a specific period. It demonstrates the accumulated net profits that have not been distributed as dividends. This statement is crucial in providing information about how a company's earnings have been retained and reinvested back into the business over time.

The statement of retained earnings is prepared to show the movement in a company's retained earnings balance. It starts with the beginning balance of retained earnings and incorporates adjustments for net income or loss, dividends paid, and any other relevant transactions affecting the retained earnings account. The resulting ending balance represents the accumulated net profits that have not been distributed to shareholders as dividends.

The statement of retained earnings is useful for several purposes. Firstly, it helps shareholders and investors understand how a company has utilized its earnings, providing insights into its profitability and growth strategies. By analyzing changes in retained earnings over time, stakeholders can assess whether the company has consistently generated profits and retained them within the business or paid them out to shareholders as dividends.

Additionally, the statement of retained earnings can be used to calculate the dividends that a corporation will pay out to its shareholders. By comparing the retained earnings balance at the beginning and end of a period and considering any dividend policy or requirements, a company can determine the amount available for distribution as dividends. This information is crucial for shareholders as it helps them estimate the potential returns on their investments.

In conclusion, the statement of retained earnings is a financial statement that shows the changes in a company's retained earnings, reflecting the accumulated net profits that have not been distributed as dividends. It provides valuable insights into the company's profitability, growth, and dividend distribution potential.

Know more about retained earnings:

brainly.com/question/14529006

#SPJ11

"Free on Board" (FOB) and "Cost, Insurance and Freight" (CIF) both describe overseas shipping agreements that specify whether the buyer or the seller is responsible for the goods while they are in transit.
Distinguish the characteristics of these two agreements. This distinction can include the pros and cons of using either agreements.

Answers

"Free on Board" (FOB) and "Cost, Insurance and Freight" (CIF) are both agreements that describe overseas shipping. They are both used to specify whether the buyer or the seller is responsible for the goods while they are in transit.

The following are some of the characteristics of each of the agreements,

FOB: This refers to the delivery of the goods at the port of shipment, and the buyer assumes the responsibility for the goods once they are loaded on the ship. After the goods have been loaded onto the ship, the seller's obligation ends.

Advantages of FOB agreement include: The seller is not responsible for the goods after they are loaded on the ship, making it an ideal choice for experienced buyers who are familiar with the shipping process. Disadvantages of FOB agreement include: It places a greater responsibility on the buyer for arranging and paying for shipping, customs, and other costs.

CIF: This refers to the delivery of goods to a destination port and includes the cost of shipping, insurance, and customs clearance. The seller assumes responsibility for the goods until they are delivered to the destination port.

Advantages of CIF agreement include: It offers greater protection to the buyer since the seller is responsible for all shipping, customs, and insurance costs. It is a better choice for buyers who are less experienced in the shipping process.

Disadvantages of CIF agreement include: It places a greater burden on the seller to arrange for and pay for shipping, insurance, and customs costs.

To learn more about overseas shipping, visit:

https://brainly.com/question/31325499

#SPJ11

How do US commercial banks eam most of their profits? From their overdiraft fees From the fees they charge for opening up checking accounts From the interest eamings on their US Treasury Bond portfolio. From the loans they have made

Answers

Commercial banks in the US earn most of their profits from the loans they have made.

Commercial banks refer to financial institutions whose primary roles are accepting deposits, offering loans, and providing various other financial services such as checking and savings accounts, certificates of deposit (CDs), and credit cards. Commercial banks cater to individuals, small businesses, and large corporations. Banks are also the backbone of the economy.

For businesses to grow, they need loans. Thus, the banks' primary role in the economy is to offer credit to companies. Loans offered by commercial banks can range from personal loans to small businesses and mortgages to large corporations. Therefore, the most significant source of revenue for commercial banks comes from the loans they have made.

Let's go over the other options: From their overdraft fees - Overdraft fees are charged to clients who overdraw their accounts. While this is a source of revenue for commercial banks, it is not the most significant source. From the fees they charge for opening up checking accounts - While commercial banks do charge fees for opening checking accounts, it is not the primary source of revenue.

Learn more about commercial banks visit: brainly.com/question/1432446

#SPJ11

CASE STUDY: Jane Austin was to have dinner at 6 PM with Lily Jackson; her best friend and co-supervisor at Digital Communications, Inc. Jane arrived at 6:15, .slumped in her chair and said, "Get the waiter, I need a drink.' That Michael Owens is driving me up the wall," Lily responded, "He's giving you problems again, huh?" "He sure is," said Jane. "1sure misjudged that guy when we hired him. He came to us with an excellent work record and has a good educational background in computer programming. During the employment interview he made an outstanding impression. He was neatly dressed, well groomed, poised, and obviously knew his business. I thought he would be an outstanding addition to our Special Applications Branch. He immediately caught on to our procedures and began producing outstanding work. The first month he was here he came up with a troubleshooting technique that greatly improved our ability to spot and correct mistakes." "Wish I had a guy with that kind of problem working. for me," said Lily. "No you don't," responded Jane. "The guy is a real wacko. Not long after he started with us he began coming to work in sandals without socks and a muscle shirt. He also grew a beard, and you know how that goes over with our big boss. I finally got him to wear socks and a decent shirt, but he still has the beard." "Last month, I put him on the Dawkins Company job and told him it was a rush order and that I needed it in three days. The first afternoon after I assigned him the job, I found him with his feet up on the desk reading a magazine. About quitting time, he started working on the project. Someone told me he worked on it all night. He didn't show up the next afternoon until 2 PM, leaving his section unmanned most of the day. I was about to chew him out good when he came in to my office and threw the completed project on my desk. It was an excellent piece of work. The last programmer I gave a job like that to took three weeks to complete it, and then it was full of mistakes. 'Lily responded, "Okay ,so he dresses and acts a little weird, he still seems like a jewel to me." "Yea" ,said Jane, "but you haven't heard about his latest stunt. You know how sensitive the work is that we do. If a competitor ever got any of our procedures, we would he in serious trouble. Michael not only refuses to take our security precautions seriously, he thinks they are ridiculous and actually flouts them. A while back, I had a serious discussion with him about his carelessness with a particular set of sensitive programs. He' responded by telling me that the company was paranoid about security, and that the information about one of those programs had recently been published in Computer Magazine. One day I overheard him bragging to some of the other programmers that he had gotten past the security guard that morning by quickly flashing his Playboy Club card at the guard instead of his security badge. I chewed him out, and although he apologized, he couldn't understand why I didn't think the incident was funny, "He really tipped things this morning. He showed up at the gate without his badge. and refused to let. the guard issue him a temporary pass. When the guard would not let him in the gate without it, Michael got red in the face and left. He didn't show up for work today, and no one answers the phone at his house." "Wow," said Lily. "What are you going to do now, fire him?"
The types of competitors and the competitive environment for this company (what outcomes need to be achieved to be effective and efficient and successful)
YOUR SUGGESTIONS for changes (personal and organizational) that can lead to a WIN-WIN for the company, managers and employ
I know this question has already been answered, but I would like a more understandable answer

Answers

The types of competitors and the competitive environment for the Digital Communications, Inc. (DCI) company are as follows: Types of competitors:

The direct competitors of the DCI company are other computer programming and software development firms that are offering products and services similar to the company. The indirect competitors are firms that are offering substitute products and services like data analysis tools, big data analytics, cloud-based solutions, etc. In addition, the potential competitors of the company include those firms that are not offering similar products and services but have the potential to enter the market.Competitive Environment: To be effective, efficient, and successful, the DCI company must achieve certain outcomes like enhancing the quality of services, increasing customer satisfaction, expanding the market share, developing a competitive workforce, improving profitability, and increasing innovation and creativity. To achieve these outcomes, the company must continuously monitor and assess the competitive environment and respond to it by developing and implementing strategic plans. This includes setting clear objectives and goals, analyzing the strengths, weaknesses, opportunities, and threats (SWOT), and developing competitive strategies that can effectively address the competitive forces. Moreover, it is essential to develop a culture of excellence, innovation, and continuous improvement, and provide employees with the necessary resources and incentives to achieve these goals.

The following are the personal and organizational changes that can lead to a win-win for the company, managers, and employees:

Organizational changes: Develop a culture of diversity and inclusion by promoting a work environment that is respectful, supportive, and empowering for all employees.

Provide employees with adequate training, resources, and support to develop their skills, knowledge, and competencies.

Implement effective performance management systems that provide feedback, recognition, and rewards for high performers and opportunities for development and improvement for low performers.

Develop clear communication channels and effective feedback mechanisms that promote transparency, openness, and trust among employees, managers, and leaders.Personal changes: Develop a positive mindset that promotes a growth mindset, resilience, and adaptability. This includes being open to change, and learning from failures, and potential competitors. Develop effective time management and prioritization skills that enable you to manage your workload, meet deadlines, and balance your personal and professional life.

Build strong relationships with colleagues, managers, and stakeholders by being respectful, collaborative, and empathetic. Develop effective leadership skills that enable you to motivate, inspire, and guide others toward achieving common goals.

To learn more about potential competitors, visit here

https://brainly.com/question/29416304

#SPJ11

Consider again Dave: Dave collects old synthesizers. One he bought a few years back for $3400 he's decided to sell. Over the time he owned it, Dave did $160 in repairs and renovations. In preparing to sell the synthesizer, he's told by a source he considers 100% reliable that he could sell it for $3800 as it currently is. If, however, he is willing to pay $700 for some additional cosmetic repairs, he's told he could definitely get $4700 instead. Dave do the cosmetic repairs before selling because the marginal benefit of doing so is than the marginal cost. should not; greater should not; less should; greater should; less

Answers

Making the aesthetic fixes has a marginal advantage that outweighs its marginal cost. Before selling, Dave ought to do the purely cosmetic repairs.  

The additional advantage you get from consuming one more unit of an item or service is known as a marginal benefit. The cost of creating one more unit of an item or service is known as the marginal cost. The extra cash Dave may get for the synthesizer if he makes the aesthetic repairs is the marginal advantage of performing them. ($4700 - $3800) is the additional sum of $1000.

The $700 Dave must pay for the repairs is the marginal cost of performing the aesthetic fixes. According to the facts provided, doing the repairs will result in a marginal benefit larger than a marginal cost. In other words, Dave will make a net gain of $300 ($1000 - $700) if he does the repairs before selling.

To Know more about cosmetic repairs.  

https://brainly.com/question/32166498

#SPJ11

Question 1:
Which types of injuries have not been considered to be work-related under workers’ compensation:
-sports injuries sustained on the company’s premises during lunch hour,
-injuries sustained on the company’s premises during lunch hour
-injuries sustained in an auto accident on company premises.
-injuries sustained in an auto accident while the employee was commuting to work.
-all are considered work-related injuries.
Question 2:
Workers’ compensation programs are primarily legislated at the state level.
-True
-False
Question 3:
An employer who fails to carry workers’ compensation insurance can be sued by an injured employee under state common law.
-True
-False
Question 4:
An employer has no immunity under workers’ compensation from suits by injured employees for intentional as opposed to accidental injuries to employees:
-True
-False
Question 5:
Which legal theory did not protect employers from liability for worker injuries before workers’ compensation laws were enacted?
-assumption of risk
-fellow servant
-contributory negligence.
-private property exception.

Answers

Question 1:Sports injuries sustained on the company’s premises during lunch hour have not been considered to be work-related under workers’ compensation.

Question 2:True, workers’ compensation programs are primarily legislated at the state level.

Question 3:True, an employer who fails to carry workers’ compensation insurance can be sued by an injured employee under state common law.

Question 4:False, an employer has immunity under workers’ compensation from suits by injured employees for intentional as opposed to accidental injuries to employees.

Question 5:Private property exception did not protect employers from liability for worker injuries before workers’ compensation laws were enacted.

Workers' compensation refers to the benefits that employees are entitled to if they are injured on the job. These benefits include wage replacement, medical treatment, disability compensation, and vocational rehabilitation. Workers' compensation is a type of insurance that is mandatory for all employers to carry in case of employee injuries or illnesses.

Workers' compensation is regulated by state law, so the rules and requirements vary from state to state. Workers' compensation laws, however, provide benefits to workers who are injured or become ill on the job. Employers are required to carry this insurance, which provides benefits to workers who are hurt or sickened as a result of their work.

The primary goal of workers' compensation is to offer assistance to employees who have been injured on the job. The benefits are intended to pay for medical care, compensate for lost earnings, and assist injured employees in returning to work as soon as possible. Workers' compensation is a no-fault system, which means that the worker does not have to prove that their injury was caused by someone else's negligence or wrongdoing.

To learn more about worker's compensation, visit here

https://brainly.com/question/15307992

#SPJ11

1. Identify the financial health of Amazon. Look at different
financial ratios
2. How can you help forecast for Amazon?

Answers

1. Financial health of Amazon:Amazon is one of the biggest e-commerce companies in the world. Its revenue has been consistently increasing. In 2020, the company's revenue was $386 billion, which was a 38% increase from the previous year.

Amazon has also been profitable in recent years, with a net income of $21.3 billion in 2020. It has a strong balance sheet, with $84.4 billion in cash and short-term investments, and total assets of $321.1 billion. The company's financial ratios also indicate good financial health. Its current ratio of 1.08 indicates that it has enough current assets to pay off its current liabilities. Its quick ratio of 0.81 is slightly lower, but still within the acceptable range.

The debt-to-equity ratio of 0.56 indicates that the company is financing its operations primarily through equity.2. Forecasting for Amazon:Forecasting for Amazon involves predicting the company's future revenue and earnings based on historical data, market trends, and other factors. One way to do this is to use financial ratios and other metrics to analyze the company's financial health and performance. For example, analysts might look at Amazon's price-to-earnings (P/E) ratio to determine whether the company's stock is overvalued or undervalued.

They might also look at the company's revenue growth rate to determine whether it is likely to continue growing at the same rate in the future. Another way to forecast for Amazon is to use machine learning algorithms and other advanced analytics tools.

To know more about consistently visit:

brainly.com/question/30321733

#SPJ11

Carly Simmons is approached by a small sole proprietor to assist him in getting the record-keeping for the enterprise organized to firm up receivables, payables, payroll, and other taxes necessary to run the business. It seems the owner intends to apply for a $50,000 loan at the bank. During the month following their initial discussion and agreement on services, Carly established a suitable internal control system, assisted the bookkeeper with setting up a "Quick Books" type of record-keeping, prepared to adjust and closing entries for the month, and discussed the computerized financial statements with the owner. Answer the following:
a. Should Carly have gotten an engagement letter? If so, what should it have included?
b. What type of compilation service has Carly performed? Does she have to prepare a compilation report?
c. What legal liability issues would be of concern to you if you were Carly?

Answers

a) Yes, Carly should have obtained an engagement letter.

b) Carly has performed a compilation service.

c)  Legal liability issues that would be of concern to Carly include Professional liability.

a. Yes, Carly should have obtained an engagement letter since the engagement is to assist the sole proprietor to get the record-keeping for the enterprise organized and it is expected to apply for a loan of $50,000 at the bank.

The engagement letter should have included information that would help to manage the expectations of the client about the kind of services provided, the type of work that is to be done, the responsibilities of Carly, and the fees.

b. A compilation service is the most basic level of financial statement service provided by an accountant. It involves presenting the information that is the representation of management in the form of financial statements.

Carly has performed a compilation service since she has assisted the bookkeeper with setting up a "Quick Books" type of record-keeping, established a suitable internal control system, prepared adjusting and closing entries, and discussed the computerized financial statements with the owner. Yes, Carly has to prepare a compilation report.

c. Legal liability issues that would be of concern to Carly include:

Professional liability: Carly can be sued for not delivering the quality of services she was expected to deliver. If the services provided by Carly are not satisfactory, she can be held liable for professional negligence. This could result in the loss of a license or reputation. She needs to be careful in her work to avoid any mistakes.

Know more about the compilation service

https://brainly.com/question/14476382

#SPJ11

Suppose an auto parts manufacturer is thinking of moving production facilities overseas to a
foreign country. Production functions and input costs are the following:
Domestic:
q = 82L0.4K0.6, where w=25 and r=50
Foreign:
q = 74L0.6K0.4, where w=20 and r=60
For a quantity of 120, calculate the optimal K and L in each country and compute total costs
in each country. In which area should the firm locate?

Answers

In the domestic country, the optimal K is approximately 2.874 and the optimal L is approximately 1.471. Firm should locate production facilities in foreign countries to minimize costs, as total costs are lower in foreign countries.

To calculate the optimal K and L in each country and compute total costs, we need to find the values of K and L that minimize the cost function.

For the domestic country:
The cost function is given by C = wL + rK, where w is the wage rate and r is the rental rate for capital.

Given that w = 25 and r = 50, the cost function becomes C = 25L + 50K.

To find the optimal values of K and L, we need to solve the production function for L and substitute it into the cost function.

The production function for the domestic country is q = 82L^0.4K^0.6.

Substituting q = 120, we have:
120 = 82L^0.4K^0.6.

Now, solve for L in terms of K:
L^0.4 = (120/82) / K^0.6.
L = [(120/82) / K^0.6]^2.5.

Substitute this expression for L into the cost function:
C = 25[(120/82) / K^0.6]^2.5 + 50K.

Now, differentiate C with respect to K and set it equal to zero to find the optimal value of K:
dC/dK = -30[(120/82) / K^0.6]^1.5 + 50 = 0.
[(120/82) / K^0.6]^1.5 = 50/30.
[(120/82) / K^0.6]^1.5 = 5/3.

Solving this equation, we find K ≈ 2.874.

Substitute this value of K back into the production function to find L:
L = [(120/82) / (2.874)^0.6]^2.5 ≈ 1.471.

Therefore, in the domestic country, the optimal K is approximately 2.874 and the optimal L is approximately 1.471.

Now let's calculate the total costs in each country:

For the domestic country:
C = 25(1.471) + 50(2.874) ≈ $161.03.

For the foreign country:
The cost function is given by C = wL + rK, where w = 20 and r = 60.
Substituting the values, C = 20L + 60K.

Using the same method as above, we can find the optimal K and L for the foreign country:
K ≈ 1.463, L ≈ 2.595.

Substituting these values into the cost function:
C = 20(2.595) + 60(1.463) ≈ $128.36.

Comparing the total costs, we can see that the total cost in the foreign country is lower than in the domestic country. Therefore, the firm should locate its production facilities in the foreign country to minimize costs.

Know more about optimal value of K here:

https://brainly.com/question/33436493

#SPJ11

When we mention projects, we consider usually they are developed through progressive elaboration, which means ?

Answers

Progressive elaboration refers to the process of continuously refining the project scope and requirements as more information becomes available.

Progressive elaboration is a project management term that refers to the process of continuously refining the project scope and requirements as more information becomes available. It is the process of planning a project in more detail as it progresses.

The process of progressive elaboration allows a project manager to start with a general idea of what they want to accomplish, and then gradually add details and refine the plan as more information becomes available. This approach can help avoid scope creep, which is when the project scope grows beyond the original plan and budget.

Progressive elaboration may include adding more details to the project schedule, identifying additional stakeholders, or refining the project budget. This process allows the project team to adjust the plan as necessary to keep the project on track and achieve the desired outcome.

To learn more about Progressive elaboration, visit:

https://brainly.com/question/10198493

#SPJ11

In the learning journal, you should record your activities, and record problems you may have encountered, as well as your notes and thoughts about the material. In addition, you should consider the following questions for reflection: Think of one of the processes in your life you identified in Unit 3, and apply the 5 S methodology to it. Explain each step. How is the resulting process different?

Answers

The 5 S methodology is an effective tool for improving the efficiency of a business process. This technique is used to create a workplace that is clean, organized, and productive. 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

Below is the explanation of each step:

Sort:

First, eliminate anything that is not required in the process. Items that are no longer needed or are outdated can be removed. This will declutter the workspace and increase productivity.

Set in Order:

Determine the order in which items will be arranged. Keep frequently used items close at hand to save time and reduce unnecessary movements. Label all equipment and tools, and ensure they have a specific place to return to.

Shine:

Clean the area and keep it clean. This will reduce the likelihood of equipment failures and make it easier to identify any problems that may arise.

Standardize:

Establish a standard for the 5 S process and ensure that everyone follows it. This ensures that the process will remain organized and efficient, even if there are changes to the process or personnel.

Sustain:

Continuously monitor the process to ensure that it is being followed. Develop a system to maintain and monitor the process to ensure that it remains efficient over time. Applying the 5 S methodology to a process in your life can lead to a more efficient and effective process.

For example, if you apply the 5 S methodology to your morning routine, you could sort out the clothes you wear, set them in order, clean up the room, establish a routine and stick to it, and keep it up by always checking for any missed step. The result is that you will be more organized and efficient in your morning routine, which can lead to greater productivity throughout the day.

Learn more about methodology from:

https://brainly.com/question/21761325

#SPJ11

Explain at least three potential challenges and/or obstacles that Fresh Food could face if the
company decides to include potential providers from Mexico and South America

Answers

Fresh Food is a food company that could potentially face cross-cultural challenges if it decides to include potential providers from Mexico and South America

Here are three potential challenges:

1. Language Barrier: A potential obstacle that Fresh Food could face is a language barrier between the company and the providers. This could make it challenging for both parties to communicate effectively and efficiently, which could lead to misunderstandings and misinterpretations.

2. Transportation: Another potential challenge that Fresh Food could face is transportation. Mexico and South America are located far from Fresh Food's headquarters, and transportation could be a significant issue. The company would need to ensure that the food products are transported safely and efficiently to maintain their freshness.

3. Cultural Differences: Finally, a potential challenge that Fresh Food could face is cultural differences. Mexico and South America have different cultures, cuisines, and customs than those in the United States. Fresh Food would need to be sensitive to these differences to avoid offending providers and to ensure that the food products meet the company's standards.

To know more about cross-cultural challenges please check the following link

https://brainly.com/question/31087975

#SPJ11

Marketing refers to the process of communicating, creating, and delivering the organisational function to their valuable clients. 2.1 Elucidate on the value that marketing management provides to an organisation.

Answers

Marketing management helps organizations understand customer needs and preferences while building a strong brand image, leading to higher customer satisfaction, loyalty, and increased market share.

Marketing management provides several key values to an organization. Firstly, it helps in identifying and understanding the needs and preferences of customers.

By conducting market research and analysis, marketing managers gain insights into consumer behavior, market trends, and competitive landscapes. This information enables organizations to develop products and services that align with customer demands, leading to higher customer satisfaction and loyalty.

Secondly, marketing management plays a crucial role in building and maintaining brand image and reputation. Through effective branding strategies, organizations can differentiate themselves from competitors, establish a unique identity, and create a positive perception among customers.

To learn more about marketing management

https://brainly.com/question/30239935

#SPJ11

Other Questions
Select the line that is equivalent to 2x 3y = 9.y equals 2 over 3 x minus 3y equals 3 over 2 x minus 9 over 2y equals short dash 3 over 2 x plus 9 over 2y equals short dash 2 over 3 x plus 3 5. (a) (3 points) If f(x) dx = F(x) and a 40 and b are two real numbers, then evaluate the following integral: Lecture note substitution) [f(ax + b) dz 1. Find the support reactions at points A, B, and C. Assume that the second moment of area of segment BC is twice that of segment AB. 60kN 15kN/m B 10m 5m * 5m Biometric identification eliminates all hassles associated with IDs, passwords and other possession or knowledge-based identification methods, making identification a truly convenient experience. In the car-carrying industry, monitoring each driver with specific biometric information can ensure their safety and general well-being. In addition, it gives management access to rich data that can be used to improve company-wide decision-making and individual performance assessments. On a larger scale, it was noted that the car-carrying industry might employ tracking data to reduce operating costs by analyzing excessive fuel use, discovering invoicing irregularities, lowering overtime costs, and readily detecting any illicit use of a vehicle.Recommend any EIGHT (8) types of vulnerabilities of biometrics system in a given scenario.Elaborate TWO (2) types of security demands in biometric systems for the given scenario. shows a Wheatstone bridge used to measure weight, the sensor R4 is built from strain gauge and the linear relationship between resistance(2) of strain gauge versus weight (kg). Given that during the weight is 500 kg, current Ig is zero. Determine the values of Rth, Eth and Ig when given weight is 300 kg. Given Vdc = 15 V, R1 = 100 Q2, R3 = 150 Q, Rg = 120 2. R4 (92) P1 R =Vdc Weight (kg) Is (1) As strain gauge 200 50 0 500 How does an atom change if all of its electrons are removed?p.s. I'll mark the first answer the brainliest if it is correct! ;)a. The atoms volume increases.b. The atoms mass increases.c. The atom becomes positively charged.d. The atom becomes negatively charged. Classify the following triangle. Check all that apply Use Matlab to generate bode plot of following circuit. (Hv=Vout/Vin.) R = R = 2kQ, L = 2 H, C = C = 2 mF. R www R ww + Vou T C 1 out! C. out Before the Constitution could go into effect,A. 5...7B. 9... 13C. 13... 13D. 45...50Please select the best answer from the choices providedABCO DPrevious Activityofstates were required to approve Did Frida Kahlo had any artworks that the public has been prevented from seeing? Do you believe that artworks should never be censored, or do you think that there are some subjects that should be banned? A logic circuit is designed for controlling the lift doors and they should close (Y) if: (i) the master switch (W) is on AND either (ii) a call (X) is received from any other floor, OR (iii) the doors (Y) have been open for more than 10 seconds, OR (iv) the selector push within the lift (Z) is pressed for another floor. Devise a logic circuit to meet these requirements. (8 marks) (b) Use logic circuit derived in part (a) and provide the 2-input NAND gate only implementation of the expression. Show necessary steps. (8 marks) c) Use K-map to simplify the following Canonical SOP expression. F(A,B,C,D) = m(0,2,4,5,6,7,8,10, 13, 15) (9 marks) A 20-F capacitor is in parallel with a practical inductor represented by L 1 mHz in series with R = 72. Find the resonant frequency, in rad/s and in Hz, of the parallel circuit. Consider the following state transition diagram with inputs S and x and one Moore output z: s=0 T2 s=1 Z=1. To Z=0 Z=1 X=0 T3 Z=1 x=1 (a) design a logic circuit implementation of this FSM using D flip-flops. (b) what is the maximum duration (expressed in number of clocks) of a start input "s" to ensure a single iteration from To back to To? A point in rectangular coordinates is given. Convert the point to polar coordinates. Round your answers to two decimal places, >0.(11,13)Polar coordinates: (11,-0.87)Polar coordinates: (11,0.87)Polar coordinates: (13,0.87)Polar coordinates: (290,-0.87)Polar coordinates: (290,0.87) Which of the following statements about the Equal Employment Opportunity Commission (EEOC) is false?Multiple ChoiceThe EEOC is composed of five members.The EEOC was created by the Sarbanes-Oxley Act of 2002 to ensure fair employment opportunities to applicants of any race, religion, color, or sex.The EEOC can have a maximum of three members belonging to the same political party.Members of the EEOC serve a five-year term.Members of the EEOC are appointed by the president, with the advice and consent of the Senate. What is the best indication a stimulus is a sign stimulus?sufficient for eliciting a fixed action patterncauses a reflex to occurfirst causes habituation, then sensitizationsimilar to instinctfirst causes sensitization, then habituation In a RC circuit, C = 4.15microC and the emf of the battery is E= 59V. R is unknown and the time constant is Tau(s). Capacitor is uncharged at t=0s. What is the capacitor charge at t=2T. Answer in microC in the hundredth place. Select the correct answer.Read the sentence from paragraph 11.So saying, he unfurled his black flag, and then sternly bade us go below, just as a shell struck the Nautilus, and rebounded into the sea.Which word has the closest connotative meaning to the word bade in the sentence? A. told B. ordered C. requested D. encouraged 1. Using the data in Table 21.1, estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, and compare these values with those cited in t Discuss what Alinsky means by a proxy tactic and address theirnature or complexity. Why are proxies significant, and what istheir end or purposes or an end or purpose?