List six things cyber criminals typically ask for in a phishing email

We are aware that ether is a polar solvent and pentane is an apolar one. The less polar material moves quicker while more polar component travels slower.

By use of polar interactions, the sample that has to be separated will be adsorbed to the stationary phase comprised of alumina or silica gel. The eluting solvent will be used to elute these adsorbed molecules. Both polar and non-polar solvents may be used as these eluting agents. The interactions with the polar molecules that are adsorbed to the chromatographic column grow when the polarity of the eluting solvent is increased. Pentane is less polar than ether when compared. As a result, polar molecules are separated from and eluted from the stationary phase using ether. This is due to the fact that polar solvents may dissolve polar substances due to polar interactions.

learn more about polar solvent here:

https://brainly.com/question/12973798

#SPJ4

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

where:

We can rearrange this equation to solve for [tex]P_2[/tex]:

Since [tex]V_1[/tex] and [tex]V_2[/tex] are constant in this case, we can simplify this to:

Substituting the given values, we get:

where:

Simplifying, we get:

Therefore, the pressure of the gas will be 0.84 atm if the temperature increases to 50.00°C.

[tex]\rule{200pt}{5pt}[/tex]

Answer:

The final pressure is 0.841 atm (to three significant figures).

Explanation:

Since the volume is unchanged, we can use Gay-Lussac's Law to find the pressure of the gas if the temperature increases to 50.00°C.

[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]

where:

Rearrange the equation to solve for P₂:

[tex]\implies \sf P_2=\dfrac{P_1 \cdot T_2}{T_1}[/tex]

Convert Celsius to kelvin by adding 273.15:

[tex]\implies \sf 15.00^{\circ}C=15.00+273.15=288.15\;K[/tex]

[tex]\implies \sf 50.00^{\circ}C=50.00+273.15=323.15\;K[/tex]

Therefore, the values to substitute into the formula are:

Substitute the values into the formula and solve for P₂:

[tex]\implies \sf P_2=\dfrac{0.75 \cdot 323.15}{288.15}[/tex]

[tex]\implies \sf P_2=0.841098...[/tex]

[tex]\implies \sf P_2=0.841\;atm\;(3\;s.f.)[/tex]

Therefore, the final pressure is 0.841 atm (to three significant figures).

The C-Cl bond in the [tex]CCl_4[/tex] molecule is polar because the electronegativity difference between C and Cl is greater than 0.5. Since [tex]CCl_4[/tex] is tetrahedral in shape and symmetrical, the individual bond dipoles cancel each other out and the molecule is nonpolar overall.

The polarity of a bond in a molecule is determined by the electronegativity difference between the atoms that comprise the link. The larger the difference in electronegativity, the more polar the bond. In the case of [tex]CCl_4[/tex], chlorine has a higher electronegativity than carbon, resulting in a polar covalent bond between them.

Despite the polarity of the C-Cl bonds, the molecule as a whole is nonpolar due to its tetrahedral structure and symmetry. When a tetrahedral molecule like [tex]CCl_4[/tex] is considered as a whole, the bond dipoles formed by the polar bonds cancel each other out. This occurs because the four C-Cl bonds are symmetrically formed in a tetrahedral geometry around the carbon atom, with the same bond angle and bond length.

As a result, the total dipole moment of [tex]CCl_4[/tex] is zero, and the molecule has no overall dipole moment. [tex]CCl_4[/tex] is thus a nonpolar molecule despite the presence of polar bonds.

For more such questions on electronegativity, click on:

https://brainly.com/question/24977425

#SPJ11

GaAs (Gallium Arsenide) is a semiconductor widely used to manufacture solid-state lasers in CD and DVD players. GaAs is a compound composed of Gallium and Arsenic. Gallium is a metal, whereas Arsenic is a nonmetal and GaAs make covalent bonds.

Learn more about covalent bonds: https://brainly.com/question/3447218

#SPJ11

Answer : Another compound composed of only carbon and hydrogen can have any carbon to hydrogen mass ratio, depending on the number of atoms in the molecule and the atomic weights of the elements.

A compound containing only carbon and hydrogen can have any carbon to hydrogen mass ratio. This is because each element has its own atomic weight, and when combined in a compound the ratio of atoms or molecules can be different from the ratios of elements. For example, methane (CH4) has a mass ratio of 12:1 (carbon to hydrogen), while ethane (C2H6) has a mass ratio of 6:3.

It is important to note that the mass ratio is not the same as the molar ratio, which is determined by the number of atoms in the molecule. For example, ethylene (C2H4) has a molar ratio of 1:2, but its mass ratio is 6:4.

Know more about atomic weights here:

https://brainly.com/question/17464418

#SPJ11

Ammonium acetate is a chemical compound with the formula CH3COONH4, and it is an ionic salt. It is colorless, crystal-like, and readily soluble in water. Acetic acid and ammonia are the two primary components of ammonium acetate. Ammonium acetate is commonly used in the production of various chemicals, such as dyes, insecticides, herbicides, and various other chemicals.

Thin-layer chromatography (TLC) is a common method for separating compounds in a mixture based on their polarity. The solvent used in TLC should be of low polarity, which would not dissolve the silica gel on which the sample is applied. Additionally, the solvent should be polar enough to elute the compound with the lowest polarity out of the sample.

Ammonium acetate is used in the solvent mixture for a TLC analysis in week 2 because it enhances the separation of polar compounds in the mixture. It is frequently used in mass spectrometry as a volatile buffer to improve ionization efficiency. Ammonium acetate buffers can also be utilized in chromatography to improve the separation of peptides and proteins.

Ammonium acetate is utilized to enhance the separation of polar compounds in TLC analysis because it is an ionic salt, which means it is polar. As a result, it dissolves polar compounds more effectively, allowing them to migrate across the TLC plate more efficiently. It also aids in the formation of strong hydrogen bonds between polar solutes, allowing them to be separated more effectively.

In conclusion, the usage of ammonium acetate in the solvent mixture for the TLC analysis in week 2 is due to its polar nature. It improves the separation of polar compounds in the mixture and is a common additive used to improve ionization efficiency in mass spectrometry.

To know more about TLC analysis click here:

https://brainly.com/question/24082910

#SPJ11

Yes, particulate matter can increase global warming by reacting with chlorofluorocarbons, reducing surface absorption of ultraviolet radiation, producing additional nitrous oxides, reflecting radiation, and lowering surface albedo.

When particulate matter reacts with chlorofluorocarbons (CFCs), this increases the concentration of CFCs in the atmosphere which is known to cause global warming. Particulate matter also reduces the surface absorption of ultraviolet radiation, leading to an increase in the amount of ultraviolet radiation that is reflected back into the atmosphere. Furthermore, particulate matter also produces additional nitrous oxides, which also contribute to global warming. Lastly, particulate matter can lower surface albedo, which causes the surface to absorb more heat, leading to a rise in temperature.

In summary, particulate matter can increase global warming by reacting with chlorofluorocarbons, reducing surface absorption of ultraviolet radiation, producing additional nitrous oxides, reflecting radiation, and lowering surface albedo.

Learn more about global warming : https://brainly.com/question/3553382

#SPJ11

The solubility of AgCl(s) is more in tap water because of Q < K.

The solubility product constant (Ksp) for AgCl(s) is [tex]1.6 x 10^-10[/tex]. This means that in a saturated solution of AgCl(s), the product of the concentrations of Ag+ and Cl- ions is equal to Ksp.

In distilled water, the concentration of Cl- ions is negligible, so the ion product (Q) of Ag+ and Cl- ions in a saturated solution of AgCl(s) would be very small. Since Q < Ksp, the system is not at equilibrium and more AgCl(s) can dissolve to reach equilibrium.

In tap water, the concentration of Cl- ions is 0.010 M, which is much higher than in distilled water. Therefore, the ion product (Q) of Ag+ and Cl- ions in a saturated solution of AgCl(s) would be much closer to Ksp. Since Q is closer to Ksp, the system is closer to equilibrium and less AgCl(s) can dissolve.

Therefore, the solubility of AgCl(s) is more in distilled water than in tap water where the [Cl−] = 0.010 M.

To learn more about solubility  please visit-
https://brainly.com/question/29661360
#SPJ1

Answer:

The advantage of using greater amounts of material is that it will create a more stable buffer solution. This is because the greater amount of material will result in a higher buffer capacity, meaning that the solution will be able to resist changes in pH more effectively.

a) Na₂O represents a formula unit.; b) P₂O5 represents a molecule. ; c) Cl₂ represents a molecule ; d) Au represents an atom. ; e) (NH4)2SO4 represents a molecule.

The smallest unit of compound that contains the chemical properties of compound is called a molecule.

Molecule is a group of two or more atoms held together by attractive forces which is known as chemical bonds whereas an atom consists of subatomic particles that are electrons, protons, and neutrons.

Empirical formula of any ionic or covalent network solid compound used as an independent entity for stoichiometric calculations is called formula unit and it is the lowest whole number ratio of ions represented in an ionic compound.

To know more about molecules and atoms, refer

https://brainly.com/question/28169359

#SPJ1

0.0112 moles of potassium ions are present in the solution.

We have,

The volume of solution, V = 56.0 mL = 0.056 L

The concentration of KCl, c = 0.200 m

The molar mass of KCl, M = 74.55 g/mole

We will calculate the mass of KCl required to make the given solution of 56.0 mL of a 0.200 M KCl solution using the below formula;

Mass = Concentration × Volume × Molar mass

= 0.200 × 0.056 × 74.55

= 0.838 g

The mass of KCl required to make the 56.0 mL of a 0.200 M KCl solution is 0.838 g.

To calculate the number of moles of potassium ions in the solution, we need to calculate the moles of KCl and multiply it with the stoichiometric factor of K⁺.

We can calculate the moles of KCl using the below formula;

Moles = Concentration × Volume

= 0.200 × 0.056

= 0.0112 moles

Now, the stoichiometric factor of K⁺ in KCl is 1.

Hence the number of moles of K⁺ is the same as the number of moles of KCl.

Therefore, 0.0112 moles of potassium ions are there in the solution.

To learn more about solutions refer - https://brainly.com/question/10982830

#SPJ11

Water is the universal solvent due to its ability to dissolve a wide range of solutes. It most often exists in nature as a liquid, but can also exist as a solid (ice) or gas (water vapor).

Water is called a 'universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance. For instance, because oppositely charged particles are not very soluble in water, hydroxides, fats, or waxes cannot be dissolved by it.

Water is regarded as a significant solvent since it has a wide range of necessary for life compounds that it may dissolve. Moreover, waste materials disintegrate in water before they can.

To know more about solvent  visit:-

https://brainly.com/question/30452436

#SPJ1

Answer:

The approximate volume of the gas is 14.8 L.

Explanation:

To calculate the approximate volume of the gas, we can use the Ideal Gas Law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 15.0ºC + 273.15 = 288.15 K

Then, we can rearrange the Ideal Gas Law to solve for the volume:

V = (nRT) / P

Plugging in the given values:

V = (0.600 mol)(0.08206 L·atm/(mol·K))(288.15 K) / 0.63 atm

V ≈ 14.8 L

Therefore, the approximate volume of the gas is 14.8 L.

The element with the electron configuration 1s22s22p63s23p63d3 is: Chromium (Cr),

and its group number is: group 6,

and the period number is: period 4.

Step 1: First, we need to determine the number of electrons in the element. The given electron configuration has 1s2, 2s2, 2p6, 3s2, 3p6, and 3d3.2 + 2 + 6 + 2 + 6 + 3 = 21. Therefore, the element has 21 electrons.

Step 2: Next, we can determine the period number by adding the total number of electrons in the shells present before the valence shell, which is 3, to the period of the valence shell. 2 (period 1) + 8 (period 2) + 8 (period 3) + 3 (valence shell of period 4) = 21, so the period number is 4.

Step 3: The group number of an element is determined by its valence electron configuration. In this case, chromium (Cr) has 6 valence electrons, which correspond to the s2p4 orbitals of the 4th period. Since 6 is two less than the number of valence electrons in a complete s2p6 shell, the element is placed in group 6 of the periodic table.

Therefore, the element (X2) is a group 6 element with a period number of 4, and its name is Chromium (Cr).

To know more about electrons refer here:

https://brainly.com/question/1255220#

#SPJ11

2.62 moles of glucose can react with 15.7 moles of oxygen. The balanced chemical equation for the combustion of glucose is:

C6H12O6 + 6O2 → 6CO2 + 6H2O

From the equation, we can see that for every mole of glucose that reacts, 6 moles of oxygen are required. Therefore, the number of moles of glucose that can react with 15.7 moles of oxygen can be calculated as follows:

Number of moles of glucose = (Number of moles of oxygen) / 6

Number of moles of glucose = 15.7 / 6

Number of moles of glucose = 2.62

Therefore, 2.62 moles of glucose can react with 15.7 moles of oxygen.

To know more about oxygen, visit :

https://brainly.com/question/13370320

#SPJ1

Option A and D, CH3CH2CH2F and CH3CH2OCH3 will form hydrogen bonds between its molecules. Hydrogen bonding occurs between the polar molecules.

A) CH3CH2CH2F will form hydrogen bonds between its molecules due to the presence of a hydrogen atom and a strongly electronegative fluorine atom. The hydrogen atom will form a polar covalent bond with the fluorine atom, which creates a dipole moment and results in hydrogen bonding between molecules.
B) CH3CH2CH2CH3 will not form hydrogen bonds between its molecules due to the lack of an electronegative atom that can interact with the hydrogen atom to form a polar covalent bond.
C) (CH3)3N will not form hydrogen bonds between its molecules due to the lack of a hydrogen atom to interact with the nitrogen atom.
D) CH3CH2OCH3 will form hydrogen bonds between its molecules due to the presence of a hydrogen atom and a strongly electronegative oxygen atom. The hydrogen atom will form a polar covalent bond with the oxygen atom, which creates a dipole moment and results in hydrogen bonding between molecules.
E) CH3NHCH2CH will not form hydrogen bonds between its molecules due to the lack of an electronegative atom that can interact with the hydrogen atom to form a polar covalent bond.

For more such questions on Hydrogen bonding , Visit:

https://brainly.com/question/1426421

#SPJ11

the two methods scientist use to gather information are

. observing the natural world

. carrying out investigation

The water distributed on Earth from the greatest to the least is saltwater, freshwater, and frozen water.

Saltwater occupies 97.5% of Earth's total water. Freshwater occupies only 2.5% of Earth's total water. This freshwater is found in different forms, such as rivers, lakes, underground, and glaciers. Only 0.3% of freshwater is found in rivers and lakes, while 30% is stored underground. The rest of freshwater is stored in glaciers and polar ice caps.

The frozen water found on Earth is 1.7% of the total water. It is found in glaciers, ice caps, and snow cover around the poles. The water cycle is a natural process that allows water to move from one place to another on Earth. It is also called the hydrologic cycle. It involves the movement of water between the earth, air, and ocean.

Water evaporates from the surface of the earth, which forms clouds. The clouds then precipitate as rain, snow, or hail. This precipitation may fall on the land and join rivers and lakes, or it may seep into the ground and form underground water. The underground water may then resurface as springs or streams, which then join rivers and lakes.

The water cycle helps to purify water and replenish freshwater resources on earth. It also helps to regulate the Earth's temperature by absorbing heat during the day and releasing it at night.

For more such questions on water, click on:

https://brainly.com/question/30173238

#SPJ11

Answer:

0.0657

Explanation:

a 4.691-g sample of mgcl2 is dissolved in enough water to give 750. ml of solution. what is the magnesium ion concentration in this solution? ANSWER: 0.0657

To prepare a final dilution of 7% v/v in 50 ml, we need 17.5 ml of 20% v/v solution.

The volume percent, or v/v%, is a technique for expressing concentration.

It refers to the amount volume of the solute present in the total volume of the solution expressed as a percentage. Let us now look at the response to the question that is asked by the student,

We can calculate the amount of ml of 20% v/v solution needed to prepare a final dilution of 7% v/v in 50 ml using the formula;

[tex]C_1V_1=C_2V_2,[/tex]

where,

[tex]C_1[/tex] is the initial concentration of the solution.

[tex]V_1[/tex] is the initial volume of the solution.

[tex]C_2[/tex] is the final concentration of the solution.

[tex]V_2[/tex] is the final volume of the solution.

Substituting the values in the above formula,

[tex]C_1[/tex]=20%

[tex]V_1[/tex]= x

[tex]C_2[/tex]=7%

[tex]V_2[/tex]=50 ml

As a result, 20%x ml=7%×50 ml

0.2x=3.5ml

x=3.5 ml/0.2=17.5 ml

Therefore, we need 17.5 ml of 20% v/v solution to prepare a final dilution of 7% v/v in 50 ml.

To learn more about solutions refer: https://brainly.com/question/10068789

#SPJ11

The given carboxylic acid is reduced via reaction with excess lithium aluminum deuteride. The appropriate acidic workup is performed following this reduction. The final product(s) would best be described as an alcohol.

Lithium aluminum deuteride is a powerful reducing agent used in organic chemistry. Lithium aluminum deuteride is an odorless, white crystalline powder that is soluble in tetrahydrofuran (THF) and diethyl ether (Et2O). It is often utilized as a source of deuterium. When heated, it emits hydrogen and deuterium. Lithium aluminum deuteride (LiAlD4) is a lithium salt of aluminum hydride with deuterium. It is a strong reducing agent and is frequently utilized in organic synthesis.

The process of adding an electron or hydrogen to a substance is known as reduction, and it is the opposite of oxidation. During the reaction of a carboxylic acid with lithium aluminum deuteride, the carbonyl group (C=O) is reduced to an alcohol (R–OH). Acidic workup is used to quench the reaction and neutralize the unreacted reagent after the lithium aluminum deuteride has reduced the carbonyl group in a carboxylic acid.

Carboxylic acids are a class of organic compounds with a carboxyl functional group that consists of a carbonyl group and a hydroxyl group. Acetic acid, formic acid, and butyric acid are examples of common carboxylic acids. The formula R–COOH is used to represent them. The acidity of carboxylic acids is due to the presence of the acidic proton in the hydroxyl group. The hydrogen ion, H+, is generated when the proton is dissociated.

Learn more about reduction at:

https://brainly.com/question/30451902

#SPJ11

The pH of the buffer solution would be 4.56.

The pH of a buffer solution containing 0.350 moles acetic acid and 0.225 moles sodium acetate when enough water is added to make 0.6 liters of solution can be calculated using the Henderson-Hasselbalch equation. This equation states that the pH of the buffer solution is equal to the pKa of the weak acid plus the log of the concentration of the conjugate base divided by the concentration of the weak acid.

In this case, the weak acid is acetic acid and its pKa is 4.75. The concentration of the conjugate base (sodium acetate) is 0.225 moles, and the concentration of the weak acid is 0.350 moles.

Therefore, the pH of the solution can be calculated as:

pH = 4.75 + log (0.225/0.350) = 4.56

Therefore, the pH of a buffer solution containing 0.350 moles acetic acid and 0.225 moles sodium acetate when enough water is added to make 0.6 l of the solution is equal to 4.56.

To know more about buffers, refer here:

https://brainly.com/question/3435382#

#SPJ11

Answer: Different isotopes of the same sample have different scattering signals in neutron experiments due to their varying neutron cross-sections.

The term neutron scattering refers to a type of scattering in which neutrons collide with a target material, resulting in the emission of secondary particles. Because the neutron is a subatomic particle, it cannot be directly detected.

The effect of its presence, however, can be seen in the pattern of scattered secondary particles. Neutrons are scattered in much the same way that light is, except that they are much less affected by surface roughness and other surface-related issues.

This implies that neutron scattering is a more efficient tool for investigating material microstructures than other kinds of scattering. Neutron scattering's biggest advantage is its sensitivity to the atomic nuclei of a sample's constituent atoms.

Neutrons, unlike other subatomic particles, have no electric charge, making them less likely to be deflected by the electrons surrounding atomic nuclei, and more likely to penetrate deep into a sample's interior.

As a result, neutron scattering may reveal information about the locations and movements of atomic nuclei in materials that is inaccessible to other methods. Cross-sections of neutron scattering: The cross-section of a neutron scattering material is the probability of a neutron scattering off that material.

In other words, it's the ratio of the number of neutrons scattered per second per unit area of material to the number of neutrons striking the material per second per unit area.

Because the probability of a neutron scattering off a given isotope varies based on the neutron's energy and the isotopes present, the cross-section of a sample's individual isotopes influences the total neutron scattering signal produced by the sample.

Different isotopes of the same sample have different scattering signals in neutron experiments due to their varying neutron cross-sections.

Learn more about isotopes here:

https://brainly.com/question/11680817#


#SPJ11

Answer: True

Explanation:

Mole ratio is the conversion factor used to convert from moles of substance A to moles of substance B (option C).

Mole ratio is a ratio of the number of moles of one substance to the number of moles of another substance in a balanced chemical equation.

It allows us to convert between moles of different substances involved in a chemical reaction. Molar mass (A), Avogadro's number (B), and the mass of 1 mole (D) can be used to convert between moles and other units, such as mass and number of particles.

Learn about Mole ratio here https://brainly.com/question/30632038

#SPJ1

Therefore, the mass of 9.03 x 10^23 atoms of S is approximately 48.11 g.

So, the answer is (B) 48.1 g S.

What is Molar Mass?

Molar mass is the mass of one mole of a substance, usually expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms in a molecule. Molar mass is a useful concept in chemistry because it allows chemists to convert between mass, moles, and number of particles.

To find the mass of 9.03 x 10^23 atoms of S, we first need to find the number of moles of S in 9.03 x 10^23 atoms:

1 mole of S contains 6.022 x 10^23 atoms of S (Avogadro's number).

So, the number of moles of S in 9.03 x 10^23 atoms of S is:

9.03 x 10^23 atoms / 6.022 x 10^23 atoms/mol = 1.50 mol

Next, we can use the molar mass of S to convert moles to grams:

1.50 mol x 32.07 g/mol = 48.11 g

Therefore, the mass of 9.03 x 10^23 atoms of S is approximately 48.11 g.

So, the answer is (B) 48.1 g S.

Learn more about Molar Mass from given link

https://brainly.com/question/30459977

#SPJ1

The efficiency of the column is approximately 54,725 theoretical plates per column length, and the plate height is approximately 2.74 μm.

The efficiency of a column in High Performance Liquid Chromatography (HPLC) is measured by the number of theoretical plates per column length (N), which is a measure of the column's ability to separate components.

The plate height (H) is the length of the column required to form one theoretical plate.

To estimate the efficiency of the column and the plate height, we can use the following equation:

N = 16 * [tex](tR / w)^{2}[/tex]

where N is the number of theoretical plates, tR is the retention time of the compound, w is the peak width at half-height, and 16 is a constant that depends on the shape of the peak.

First, we need to calculate the peak width at half-height (w). We can estimate the peak width by subtracting the retention times of the two compounds and dividing by 4:

w = (4.86 - 4.65) / 4 = 0.0525 min

Next, we can use the equation above to calculate the number of theoretical plates for each compound:

N_A = 16 * [tex](4.65 / 0.0525)^{2}[/tex] = 50,450

N_B = 16 * [tex](4.86 / 0.0525)^{2}[/tex] = 59,000

We can then take the average of the two values to estimate the efficiency of the column:

N_avg = (N_A + N_B) / 2 = 54,725

Finally, we can use the following equation to calculate the plate height:

H = L / N_avg

where L is the column length. We are given that the column length is 15.0 cm:

H = 15.0 cm / 54,725 = 0.000274 cm = 2.74 μm

Therefore, the efficiency of the column is approximately 54,725 theoretical plates per column length, and the plate height is approximately 2.74 μm.

Learn more about High Performance Liquid Chromatography

https://brainly.com/question/14952062

#SPJ4

The thickness of the block in mm is 6.79 mm.

The density of a material is given by its mass divided by its volume. Therefore, in order to solve for the thickness of the block, we need to first calculate its volume. The volume of a rectangular block is the length times the width times the height. So, for this block, the volume is 12.3 inches x 4.5 inches x thickness.

Using this information, we can set up an equation to solve for the thickness:

mass/density = volume = l x w x h

1.23 lb/2.3 g/ml = 12.3 inches x 4.5 inches x thickness

Rearranging this equation, we get:

thickness = (1.23 lb)(453.592 g/lb)/ (2.3 g/ml x 12.3 inches x 4.5 inches)(25.4 mm/in)²(1 ml/1000 mm³)

thickness = 6.79 mm

Therefore, the thickness of the metal block is 6.79 mm.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

Answer:

a.polar covalent

b.ovalent

c.covalent

d.covalent

Explanation:

a.the atomic number of nitrogen is 7 and atomic number of hydrogen is 1, so the type of bond firmed btw them is called polar covalent

b.The total valence electrons in sulphur atom are 6.thus, one atom of carbon forms two *Covalent bonds* with sulphur atoms each in order to complete it octet. Hence, the bond btw carbon and sulfur us covalent bond

c.The two fluorine atom form a stable F molecule by sharing two element ; the linkage ² is called a Covalent bonds