Answer:
1750 m
Explanation:
The distance traveled is the 750 meters to the Aunt's house plus the 1000 m from there to Chick-fil-A.
750 +1000 = 1750 . . . meters traveled
Ti3N + MgO → Mg3N2 +Ti2O balance chemical equation
We have that the balanced chemical equation is mathematically given as.
2Ti_3N + 3MgO → Mg_3N_2 +3Ti_2O
From the question we are told
Ti3N + MgO → Mg3N2 +Ti2O balance chemical equation.
Generally the way to balance an equation is by making all elements present on the Left hand side(LHS) same with the right hand side RHS.
Therefore
The equation is mathematically given as.
Ti_3N + MgO → Mg_3N_2 +Ti_2OWe consider the Left hand side(LHS) first.
2Ti_3N + 3MgO → Mg_3N_2 +Ti_2OThen we consider the right hand side RHS.
2Ti_3N + 3MgO → Mg_3N_2 +3Ti_2OTherefore the balanced chemical equation is mathematically given as.
2Ti_3N + 3MgO → Mg_3N_2 +3Ti_2OFor more information on this visit
https://brainly.com/question/17756498
How much force (in Newtons) is needed to accelerate a 160 kg object at a rate of 4 m/s2?
A. 15
B. 40
C. 640
D. .025
Answer:
C. 640
Explanation:
The minimum force would occur in a frictionless environment and act parallel to any abutting surface.
F = ma = 160(4) = 640 N
Chọn câu sai :
A. Đồ thị vận tốc theo thời gian chuyển động thẳng đều là một đường song song với trục hoành Ot
B. Trong chuyển động thẳng đều ,đồ thị theo thời gian của tọa độ và của vận tốc đều là những đường thẳng
C. Đồ thị toạ độ theo thời gian của chuyển động thẳng đều bao giờ cũng là một đường thẳng
D. Đồ thị toạ độ theo thời gian của chuyển động thẳng đều là một đường thẳng xiên góc
P.s this language is: Viatnamese :)
Answer:
This is just to help the other readers help you. Or so that you understand:
Đây là để giúp bạn đọc giúp bạn!
What they tried to say:
Choose the wrong sentence:
A. The velocity-time graph of uniform linear motion is a line parallel to the horizontal axis Ot
B. In uniform linear motion, the time graphs of the coordinates and of the velocity are both straight lines
C. The time-coordinate graph of uniform rectilinear motion is always a straight line
D. The coordinate-time graph of uniform linear motion is an oblique line
Is what they asked you.
Thankyou and your welcome
Vì tôi đã giúp đỡ, tôi có thể vui lòng có cám ơn nào không?
Have a great day!
~Happy helper~
HELP PLEASEE !!!! HELP FAST
Answer:
I'd say 2) "Genes are instructions that cells use to create proteins." Because it's more specific, and that's essentially what it's for.
Answer:
2.
Explanation:
because genes don't create proteins. proteins come from what we take as food.
A heavy train of mass 200 tonnes has a maximum speed of 20m/s up a hill inclined at 1.15⁰ to the horizontal when the engine is working at 800 kwatts. What is the resistance to the motion of the train?
Answer:
https://www.brainlyanswer.com
Explanation:
click the link the answer is in the link:)
Answer:
train to busan
shadow train
the horror train
train game
The weight of an object is 180 N at a distance of 150 km above a planet's center. What is the weight of the object when it moves 450 km above the center of the planet?
By using Newton law of gravitation, the weight of the object when it moves 450 km above the center of the planet is 20N
Given that the weight of an object is 180 N at a distance of 150 km above a planet's center.
F = GMm/[tex]r^{2}[/tex]
F = mg = 180N
r = 150
When it moves 450 km above the center of the planet, G, M and m will be constant. only r will vary.
180 = GMm/[tex]150^{2}[/tex]
Make GMm the subject of the formula
GMm = 180 x 22500
GMm = 4050000
As it moves 450 km above the center of the planet, Its weight will be
F = GMm/[tex]r^{2}[/tex]
Substitute all the values and parameters
F = 4050000/[tex]450^{2}[/tex]
F = 20 N
Therefore, the weight of the object When it moves 450 km above the center of the planet is 20 Newtons
Learn more here: https://brainly.com/question/22412075
Will mark brainliest help last question
Answer:
b
the def of convection is : process by which heat is transferred by movement of a heated fluid such as air or water
therefore c and d are wrong.
Explanation:
HELP me please !!!!
When you view the pendulum’s swing, it shows that at the very top of the swing KE = 0. What does that tell you about the pendulum’s motion at that point?
it tells you that it has a lot of force
Answer:
Since I couldn't find the other answers to the same question, I wrote the wrong answer to help ya'll get the sample response. So here's from Edge
Explanation:
Sample Response: If KE = 0, the pendulum is not moving. At the top of the swing, the pendulum must stop for a brief moment.
You are driving to grandma's house, and you are traveling at an average of 70 mph. How long will it take you to travel 70 miles?
O 1 hour
O 1 second
70 hours
O 70 seconds
Answer: 1 hour
Explanation: Focus on the units; 70 miles per hour means that each hour, you will travel 70 miles
or you can use the equation time = distance/speed. You have 70miles/ 70mph = 1hour
when the frequency of a wave decreases the what increases
Answer:
The wavelength
Explanation:
As the frequency decreases, the wavelength gets longer.
Please help on these two thanks
Explanation:
Number 29
= 10 N (from rocket) + 10 N (from wheels) - 7 N (from parachute 'cause force in other direction)
= 20 N - 7 N
= 13 N ✔
Number 30
= 100 N - 85 N
= 15 N to the left ✔
If a person weighs 160 Newtons on Earth, what is their weight in pounds on Earth?
A. 27
B. 36
C. 712
D. 534
Answer:
B. 36 lb
Explanation:
m = 160/9.8 = 16.3 kg
16.3 kg ( 2.205 lb/kg) = 36 lb
the density of free electron in a copper conductor is 8.5×10^28m-3. how long does an electron take to dift from one end of a wire 3.0m long to it's other end?
Answer:
missing information what is your cross-section and current in Amperes
In the free-body diagram, the magnitude of the normal force is 40 N, the friction force is
25N, the net force is 80N: What is the magnitude of the applied force?
Answer:
Explanation:
F = 80 + 25 = 105 N
What force prevents a machine from having 100% efficiency? A. Magnetic B. Electric O C. Friction O D. Gravity
Answer:
I believe it would be C ? my apologies if I'm wrong.
DUE IN AN HOUR! HELP!!
A charged ball has a charge of -3.5x10-17c . How many electrons are found in the ball?
Answer:
218 electrons
Explanation:
pls find the attached image for solution
PLz help Asap 10 POINT
I MIGHT GIVE BRAINLIST IF RIGHT AND IF I CAN.
Answer:
Mars has a thin atmosphere
Explanation:
Okay, so this is going to sound crazy but bare with me. Mar's atmosphere is thin. There is little to no gravitational pull for the atmosphere to stay. Also, no, humans will not be able to live on Mars because the atmosphere, quite literally, contains 1% oxygen. Hopefully this helps! Earth's is thick because of the gravitational pull and gases in Earth's surface.
the weight on each foot of an elephant 500n. what will be the contact force
Answer:
The weight of an object is the force it exerts due to gravity. Pressure is force per unit area, or force divided by area over which the pressure is exerted.
Explanation:
1. For Jo:
1. For Jo:force = 500 N
1. For Jo:force = 500 Narea = 0.0001 m^2
1. For Jo:force = 500 Narea = 0.0001 m^2pressure = F/A = 500N/0.0001m^2 = 5,000,000 N/m^2
In the absence of air resistance, as an object falls freely, its
O velocity increases
O acceleration increases
both A and B
O none of the above
Answer:
None of the above
Explanation:
None of the above
What happens if hair has static electricity
Answer:
it goes up
Explanation:
The image shows a dam.
A large dam has point X behind it where the water level is high and point Y below it to, which the water flows.
Which descriptions best fit the labels?
X: kinetic energy
Y: potential energy
X: potential energy
Y: kinetic energy
X: mechanical energy
Y: electrical energy
X: electrical energy
Y: mechanical energy
Answer:
The Correct answer is B on Edge
Explanation:
I did the quiz! :)
Describe the relationship between temperature and kinetic
energy.
Answer:
temperatures is directly proportional to kinetic energy
Explanation:
in increasing the temperature,kinetic energy also increases
hope it helps...
Two skaters face one another and stand motionless, then push against each other on the ice. If one's mass is 55 kg and he moves to the left after the push at a velocity of 4.3 m/s, how fast was the other skater traveling after the push if her mass was 48 kg.
Answer:
3.75 m/s
Explanation:
55/4.3 = 48/x
12.8 = 48/x
x = 48 : 12.8
x = 3.75 m/s
#LearnWithEXO
CARRY ON LEARNING
CAN YOU BRAINLEST ME PLEASE
Which area of astronomy does Kepler's laws address? (1 point)
A. The movement of asteroids in the solar system
B. The movement of the sun in relation to the planets.
C. The movement of planets within the solar system.
D. The movement of stars within galaxies.
Answer:
B
Explanation:
His law describes the orbits of planets around the Sun.
The area of astronomy that Kepler's laws address is the movement of planets within the solar system. The correct option is C.
What is Kepler's law?According to Kepler's first law, "all the planets revolve in elliptical orbits around the sun, with the sun at one of the foci."
Perihelion is the point at which the planet is closest to the sun, and aphelion is the point at which the planet is farthest from the sun.
Kepler's laws of planetary motion, published between 1609 and 1619 by Johannes Kepler, describe the orbits of planets around the Sun.
Kepler's laws of planetary motion represent a watershed moment in the transition from geocentrism to heliocentrism. They establish the first quantitative link between the planets, including Earth.
Thus, the correct option is C.
For more details regarding Kepler's law, visit:
https://brainly.com/question/1608361
#SPJ2
Someone pls help I don’t understand this
Answer:
[tex]{ \rm{F _{ball \: on \: bat} = - F _{bat \: on \: ball} }}[/tex]
Explanation:
• This is due to the third newtons law of motion which states that "Every action has an equal and opposite reaction".
If a material were being designed to demonstrate no thermal expansions, how would the energy plot look like?
The characteristics of thermal expansion allow finding that the response for a material without thermal expansion is
The length variation is zero In the graph the line is horizontal so there is no change in length with temperature
Thermal expansion is the macroscopic sum of the changes in the length of the bonds when the energy (temperature) changes, it can be written
ΔL = α L₀ ΔT
Where ΔL is the change in length, α the coefficient of linear expansion, L₀ the initial length and ΔT the change in body temperature
In this case, a material is being designed that the thermal expansion is very small, for this the material must be made up of several compounds where some of them present a contraction with temperature, some examples: water at low temperature, liquefied gases , ceramic tile, quartz, etc.
The thermal expansion measurement processes control the body temperature and measure the change in length, in this case the change in length must be zero, in the attachment we can see a graph of a composite material with these characteristics, an example of this type of material is Invar an alloy of nickel and iron α = 3.7 10⁻⁶ ºC⁻¹
In conclusion, using the characteristics of thermal expansion we can find that the response of material without thermal expansion is
The length variation is zero In the graph the line is horizontal so there is no change in length with temperature
Learn more here: brainly.com/question/18717902
Which area of study involves how mechanics and motion affect sports performance?
1.) Momentum. 2.) Velocity. 3.) Biomechanics. 4. )Centripetal force.
Answer:
biomechanics
Explanation:
Biomechanics is part of the larger field of kinesiology, specifically focusing on the mechanics of the movement. 1 It is both a basic and applied science, encompassing research and practical use of its findings.
A block of mass 2.52 kg is kept at rest
as it compresses a horizontal massless spring
(k 116 N/m) by 9.73 cm. As the block
is released, it travels 0.537 m on a rough
horizontal surface before stopping.
The acceleration of gravity is 9.8 m/s.
Calculate the coefficient of kinetic friction
between surface and block.
By Newton's second law, the net vertical force on the block is
∑ F = N - mg = 0
so that the normal force exerted by the surface has magnitude
N = mg = (2.52 kg) (9.80 m/s²) = 24.7 N
Then as the block slides over the surface, it feels a frictional force of
f = µ (24.7 N)
where µ is the coefficient of kinetic friction.
As the block is pushed by the spring to its equilibrium position, friction performs
µ (-24.7 N) (0.0973 m) = -2.40µ J
of work (which is negative because it opposes the block's motion).
In compressing the spring by 9.73 cm = 0.0973 m, we store
1/2 (116 N/m) (0.0973 m)² = 0.549 J
of energy. This energy is released and partially converted to kinetic energy, while the rest is lost to friction.
By the work-energy theorem, the total work performed on the block as the spring pushes it towards the equilibrium position is equal to the change in its kinetic energy:
W = ∆K
0.549 J - 2.40µ J = 1/2 (2.52 kg) v ² - 0
where v is the speed of the block at the equilibrium position. Solving for v, we get
v = 0.891 √(0.549 - 2.40µ) m/s
After the block is released, the only force acting on it as it slides freely is friction. It comes to a stop after 0.537 m, so that friction performs
µ (-24.7 N) (0.537 m) = -13.3µ J
of work.
Using the work-energy theorem again, we have
W = ∆K
-13.3µ J = 0 - 1/2 (2.52 kg) v ²
Substitute the velocity we found in terms of µ, and solve for µ :
-13.3µ J = -1/2 (2.52 kg) (0.891 √(0.549 - 2.40µ) m/s)²
===> µ = 0.0350
A student practicing for a track meet ran 3500 m in 500 s. What was her average speed? a. 4,000 m/s b. 0.14 m/s c. 7 m/s d. 1,750, 000 m/s
Answer:
c. 7 m/s
Explanation:
3500 m / 500 s = 7 m/s