North of the Arctic Circle and south of the Antarctic Circle the Sun is up during their __________.

Answers

Answer 1

North of the Arctic Circle and south of the Antarctic Circle, the Sun is up during their respective summers or summer solstices.

Answer 2

North of the Arctic Circle and south of the Antarctic Circle the Sun is up during their summer months.

What are Arctic and Antarctic Circles?

The Arctic Circle is the latitude above which the sun does not set on the day of the summer solstice (June 21) and does not rise on the day of the winter solstice (December 21). The Antarctic Circle is the southernmost of the Earth's five main circles of latitude. It is located south of the Equator at 66.33 degrees south latitude, and it describes the parallel of latitude that is the farthest south where the sun can be seen above the horizon for at least one day a year.

Learn more about Arctic and Antarctic Circles here: https://brainly.com/question/1860692

#SPJ11


Related Questions

the earthquake foci pattern east of australia and just north of new zealand indicates which tectonic setting?

Answers

The earthquake foci pattern east of Australia and just north of New Zealand indicate the convergent tectonic setting.

What is a convergent tectonic setting?

Convergent tectonic setting occurs when two tectonic plates move towards each other and eventually collide. The area of contact between the two plates is known as a subduction zone. Earthquakes occur frequently in this region because of the pressure generated by the colliding plates.

The collision of the Pacific plate with the Australian plate produces a tectonic activity in the region east of Australia and just north of New Zealand.

This activity leads to the subduction of the Pacific plate beneath the Australian plate, which causes an earthquake in the area.

Consequently, the earthquake foci pattern east of Australia and just north of New Zealand indicates the convergent tectonic setting.

To know more about convergent tectonic setting, refer here:

https://brainly.com/question/13209907

#SPJ11

Fill in the blank: ____ is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.

Answers

Differential weathering is when various geologic materials exposed to the same environmental conditions will weather differently depending on their composition.

Differential weathering refers to the varying rate at which various rocks are broken down by physical and chemical weathering processes. It's due to the fact that different rocks are composed of different minerals, which have different resistance to weathering.

As a result, differential weathering occurs when rocks break down at various rates in the same environment based on their properties.

The term "differential" refers to the idea that rocks deteriorate differently based on their mineralogy and structural features. Differential weathering is due to the chemical weathering of rocks as well as the physical weathering caused by wind, water, and ice.

For more such questions on Differential weathering, click on:

https://brainly.com/question/30175720

#SPJ11

what kind of climate is controlled by elevation more than any other factor? responses temperate continental temperate continental tropical wet tropical wet highland highland polar

Answers

The climate that is controlled by elevation more than any other factor is the highland climate.

What is the highland climate?

A highland climate is a climate that is found in high mountainous areas such as the Andes, the Himalayas, and the Rockies. Due to high altitudes, these regions experience cooler temperatures compared to surrounding lowlands, making it difficult for life to thrive.

The temperature, precipitation, and vegetation of highland areas vary depending on factors such as the altitude and slope orientation. Generally, temperatures decrease with altitude, and rainfall increases.

Highland climates usually experience heavy rainfall and fog, especially in the upper elevations. Due to the cold temperatures, vegetation is limited to alpine tundra and montane forests.

countries with highland climates include China, Mongolia, The United States, Nepal, Kazakhstan, Tajikistan, Kyrgyzstan, Tibet, Uganda, Kenya, Russia, Georgia, Italy, and Switzerland, among others.

To know more about Highland climates, refer here:

https://brainly.com/question/7665343

#SPJ11

what biome is most likely to have moderate temperatures that range between 6 degrees celsius and 28 degrees celsius with large amounts of rainfall each month?

Answers

The biome that is most likely to have moderate temperatures that range between 6 degrees Celsius and 28 degrees Celsius with large amounts of rainfall each month is the tropical rainforest biome.

What is a tropical rainforest biome?

Tropical rainforests are biomes that are characterized by high rainfall, abundant plant growth, and high biodiversity. Tropical rainforests have a warm and humid climate all year round.

These biomes are found in the equatorial regions of the world. The tropical rainforest biome is home to the largest diversity of species of all biomes. These biomes contain more than half of the world's species of plants and animals.

Tropical rainforests are also important carbon sinks, helping to regulate global temperatures by sequestering carbon dioxide from the atmosphere .

How is the temperature of tropical rainforests?

Tropical rainforests have moderate temperatures throughout the year, with average temperatures ranging from 25-27 degrees Celsius (77-81 degrees Fahrenheit). Temperatures typically do not fluctuate greatly in tropical rainforests, remaining relatively constant throughout the year.What is the rainfall amount in tropical rainforests?Tropical rainforests receive high amounts of rainfall throughout the year, with an annual rainfall of between 250 and 400 centimeters (98 and 157 inches). Monthly rainfall can exceed 30 centimeters (12 inches) in some tropical rainforests.

To know more about tropical rainforest biome refer here:

https://brainly.com/question/15340927

#SPJ11

Which energy source would provide affordable, abundant, easy to produce electricity for a factory? a. solar panels b. wind turbines c. gas generators d. a hydroelectric plant

Answers

Answer: c. gas generators

Explanation: Generators are typically used as backup energy sources with power outages in both commercial and home settings.  They are the best option for various reasons:

Affordability: Gas generators tend to be relatively affordable compared to solar panels (option a) and wind turbines (option b).  The initial investment and maintenance costs of gas generators are typically lower, making them a cost-effective option for generating electricity in a factory setting.

Abundance: Natural gas, which is used as a fuel for gas generators, is a widely available energy source. It is often extracted as a byproduct of oil drilling or produced through other methods.  The abundance of natural gas ensures a reliable supply for generating electricity in the long term.

Ease of production: Gas generators are relatively easy to produce and set up compared to solar panels and wind turbines, which require specific manufacturing processes and installation procedures.  Gas generators can be readily purchased or manufactured and can be quickly set up to start generating electricity for a factory.

Learn more about electricity here: https://brainly.com/question/12791045?.

(multiple choice) the geologic material(s) most commonly associated with earth failures are .

Answers

The geologic materials most commonly associated with earth failures are clay minerals. option 2 is correct.

Clay minerals: clay mineral is natural or synthetic, might include non-phyllosilicates, without size criterion, plastic, and hardens on drying or firing. The clay minerals consist of essential elements like silica, magnesia or alumina, or both, and water, but iron substitutes for aluminum and magnesium in varying degrees, and appreciable quantities of potassium,  calcium, and sodium are frequently present as well.

Geological materials are the material extracted as-is from the earth in sediment or rock form, including rocks, sands, clays, limestone, and other industrial minerals. Earth failures are falling, exfoliating, sliding, and toppling.

To learn more about Clay minerals:

https://brainly.com/question/13332641

The complete question is -

The geological materials most commonly associated with earth failures are?

options

1. quartz

2. clay minerals

3. granite

4. basalt

explain how igneous rocks are classified, summarizing the main differences between felsic, intermediate, mafic, and ultramafic rocks.

Answers

Igneous rocks are classified based on their texture, mineralogy, and composition.

Let us discuss each classification of igneous rocks.

Felsic rocks: Felsic rocks are light-colored, have a low density, and are rich in silica ([tex]SiO_2[/tex]). They are composed mostly of feldspar minerals and quartz. These rocks are found in areas with high tectonic activity. Examples include granite and rhyolite.Intermediate rocks: Intermediate rocks are a combination of mafic and felsic rocks. They contain a high percentage of plagioclase feldspar and are intermediate in density. Examples include andesite and dacite.Mafic rocks: Mafic rocks are dark-colored, have a high density, and are rich in magnesium and iron. They are composed mostly of pyroxene and plagioclase feldspar. Examples include basalt and gabbro.Ultramafic rocks: Ultramafic rocks are composed of the least amount of silica and the highest amount of iron and magnesium. They are found deep within the earth and are mostly composed of olivine and pyroxene minerals. Examples include peridotite and dunite.

To summarize, the primary distinctions between felsic, intermediate, mafic, and ultramafic rocks are their silica content, mineral composition, color, density, and origin. Felsic rocks have the highest silica content, intermediate rocks have moderate silica content, mafic rocks have low silica content, and ultramafic rocks have the lowest silica content. The various types of igneous rocks exhibit unique physical properties and are linked to specific geological environments and processes.

To know more about the " igneous rocks": https://brainly.com/question/20538428

#SPJ11

the event that triggered the change in pluto's status from planet to dwarf planet was the discovery that

Answers

Pluto did not pass the three criteria used to be defined as a full sized planet. Pluto has not cleared its neighboring region of other objects.

magma with an initially mafic composition is believed to be generated at most convergent boundaries because of:

Answers

Magma with an initially mafic composition is believed to be generated at most convergent boundaries because of the melting of subducted lithosphere.

What is magma?

Magma is the molten rock beneath the earth's surface. Magma, a molten mixture of rock, is heated to temperatures ranging from 700 to 1300 degrees Celsius. It is a fluid mix of minerals, lava, and volcanic ash, among other things. It's difficult to distinguish between lava and magma in terms of their composition, but they're not the same thing.

Lava refers to molten rock that has been released from the earth's surface in a volcanic eruption. In contrast, magma remains beneath the surface, continuously mixing and changing composition.

The kind of magma that is generated at convergent boundaries is dependent on a number of factors, including temperature, pressure, and composition.

The following are the three types of magma: Felsic magma, intermediate magma, and mafic magma.

Mafic magma is high in iron, magnesium, and calcium but low in silica. It's usually a dark color, such as black or dark brown.

The melting of subducted lithosphere is the reason for the development of magma with an initially mafic composition at most convergent boundaries.

To know more about magma, refer here:

https://brainly.com/question/988610

#SPJ11

Two agricultural practices related to each biome

Answers

Prairies are the most valuable biome for agriculture in light of the fact that the dirt is by and large profound and fruitful. Very nearly one billion individuals depend on prairies for their occupation or as a food source.

"Arable cultivating" and "Peaceful cultivating" are the two fundamental kinds of agribusiness in light of the accessibility of land. Arable cultivating: This is the development of harvests, for the most part on complement land where the dirt is of more excellent.

Most unmodified prairies are utilized for broad domesticated animal creation, with fire and brushing the essential administration apparatuses.

There are five significant sorts of biomes: amphibian, prairie, timberland, desert, and tundra, however, a portion of these biomes can be additionally partitioned into additional particular classifications, like freshwater, marine, savanna, tropical rainforest, mild rainforest, and taiga. Amphibian biomes incorporate both freshwater and marine biomes.

To learn more about agriculture here

https://brainly.com/question/12568494

#SPJ4

which two types of ocean circulation changes have had exceptional influence on climate and biodiversity in the past?

Answers

The two types of ocean circulation changes that have had exceptional influence on climate and biodiversity in the past are El Niño-Southern Oscillation (ENSO) and Atlantic Meridional Overturning Circulation (AMOC).

El Niño-Southern Oscillation is a complex climate pattern that involves changes to ocean temperatures and atmospheric pressure in the tropical Pacific Ocean. It can lead to drastic changes in precipitation and temperature patterns in different parts of the world.

Atlantic Meridional Overturning Circulation is a large-scale system of ocean currents that transport heat from the tropics to high latitudes, and back again. This circulation is an important component of Earth’s climate system, influencing weather and climate patterns in the North Atlantic region and beyond.

Changes to the AMOC can have serious impacts on regional climate and biodiversity, particularly in Europe and North America. Both ENSO and AMOC have the potential to cause significant changes to the global climate system, with implications for biodiversity and human societies.

Know more about ocean circulation here

https://brainly.com/question/30356957#

#SPJ11

which of the following best describes why non foliated metamorphic rocks do not show foliation? a. these rocks commonly contain feldspar and hornblende minerals. b. these rocks are made of only one composition. c. these rocks have both mafic and felsic minerals d. these rocks are only made of calcite

Answers

B is the ideal response. There are no alternate layers of minerals in non-foliated metamorphic rocks since they are comprised of a single composition. Non-foliated rocks lack the differential stress necessary for foliation, which aligns minerals.

The ideal response is b. Non-foliated metamorphic rocks do not contain alternate layers of minerals because they have a single composition. Differential tension and pressure during metamorphism result in foliation, which causes minerals to align and form discrete layers. Since non-foliated rocks are uniformly composed, foliation is not created since there is no differential tension to cause mineral alignment. For instance, slate and gneiss are foliated rocks, which are formed of numerous different minerals that align to form their distinctive layered structure, but marble is a non-foliated metamorphic rock made up of just one mineral, calcite.

learn more about minerals here:

https://brainly.com/question/18078524

#SPJ4

Contemporary manufacturing is characterized by:production facilities that are generally located as close as possible to the sites of raw material productionstrong unions and localized involvement in all aspects of the production processspatial disaggregation of the production process to exploit the cheapest labor costs possiblereliance on highly skilled labor at all phases of the production processproduction facilities located close to railroads and other break-of-bulk points

Answers

Contemporary manufacturing is characterized by the use of advanced technology, automation, and globalized supply chains to take advantage of cheaper labor costs and access to raw materials worldwide. Spatial disaggregation of the production process to exploit the cheapest labor costs possible is a defining characteristic of contemporary manufacturing. The answer is option C.

Contemporary manufacturing has undergone significant changes over the years, and it is characterized by advanced technologies and automation that streamline production processes and reduce costs. The industry relies on globalized supply chains, which involve sourcing raw materials and components from different parts of the world to take advantage of cheaper labor costs and access to raw materials.

Overall, contemporary manufacturing is marked by advanced technology, automation, globalized supply chains, the use of highly skilled labor, and spatial disaggregation of the production process.

Hence, C is the correct option.

The complete question is:
What are the characteristics of contemporary manufacturing, and which of the following options describes it accurately?

A. Production facilities that are generally located as close as possible to the sites of raw material production.

B. Strong unions and localized involvement in all aspects of the production process.

C. Spatial disaggregation of the production process to exploit the cheapest labor costs possible.

D. Reliance on highly skilled labor at all phases of the production process.

E. Production facilities located close to railroads and other break-of-bulk points.

To know more about globalized supply chains, refer here:

https://brainly.com/question/30295278#

#SPJ11

a characteristically distinct collection of a sediment or feature and its corresponding artifacts is known as what?

Answers

An assemblage is a characteristically distinct collection of a sediment or feature and its corresponding artifacts.

An assemblage is a collection of materials from an archaeological site or a series of sites that were excavated. An assemblage, as a term, refers to a collection of artifacts discovered in a single location or region, such as a settlement or archaeological site. The term "assemblage" refers to the materials used by archaeologists to reconstruct human behaviour and culture from the past. An assemblage is frequently used to learn about the life and activities of a particular culture or civilization at a specific moment in time.

For example, an archaeological excavation may have yielded an assemblage of pottery, tools, and human remains. This assemblage could be utilized to learn about the everyday life, traditions, and culture of the people who lived in the area where the excavation was conducted.

An archaeological assemblage, for example, may be a collection of items discovered at a specific site that may be interpreted as having been produced or utilized by the same group of people. An assemblage is frequently used to determine the nature of a cultural site, its occupation duration, and the range of its cultural features. The dating of these features may help to establish a chronological sequence of cultural activity, which may then be used to investigate social and cultural development.

For more such questions on Archaeological assemblage.

https://brainly.com/question/26566214#

#SPJ11

which type of cloud shows the greatest vertical growthwhich cloud type would be most likely to form in an unstable atmosphere?

Answers

The type of cloud that shows the greatest vertical growth and is most likely to form in an unstable atmosphere is a cumulonimbus cloud.

The cumulonimbus cloud is known for producing strong winds, thunder, lightning, and heavy rain or snow.

These clouds are tall and dense and can grow to heights of over 10,000 meters (32,808 feet). They are composed of water droplets and sometimes contain ice crystals, which form due to the rapid condensation and uplifting of air.

An unstable atmosphere is characterized by warm, moist air near the surface and cooler air at higher altitudes, creating conditions that promote upward air currents and vertical development of clouds.

To know about cumulonimbus cloud refer here:

https://brainly.com/question/23668425#

#SPJ11

Which is the best example of the geographical term "site"?

Answers

Site mean the actual location of a settlement and the term also includes the physical characteristics of the landscape; include soil quality, minerals, wildlife, and etc

which of the following activities is not used to monitor volcanoes? group of answer choices measuring seismic activity with seismic instruments measuring sulfur dioxide gas emissions measuring changes in heat flow from satellites measuring tilting on the flanks of a volcano all of these are used to monitor volcanoes

Answers

None of the listed activities are used to monitor volcanoes.

Seismic instruments measure vibrations in the earth that can indicate an impending eruption, and gas emissions of sulfur dioxide can be used to detect when a volcano is about to become active. Changes in heat flow from satellites and tilting on the flanks of a volcano can also be used to monitor for activity. All of these activities are important for volcanologists to be aware of in order to safely monitor and predict volcanic eruptions.

Seismic activity can be monitored by using sensitive instruments that detect tiny vibrations in the earth, which are caused by movements deep underground. This can indicate if a volcano is becoming active and can give early warnings of an impending eruption. Gas emissions, like sulfur dioxide, can also be used to detect when a volcano is about to become active. The gas can be measured and monitored, and an increase in emissions can indicate the potential for a future eruption.

Additionally, changes in heat flow from satellites can be used to monitor volcanoes. Heat flow is an indication of an active or potentially active volcano. This method can be used to remotely measure the heat coming from a volcano and help scientists to predict future activity. Finally, the flanks of a volcano can be monitored for any tilting, which could indicate an imminent eruption.

For more such questions on Volcano.

https://brainly.com/question/30584712#

#SPJ11

2. how do our oceans help reduce the effects of climate change felt on the land and in the atmosphere?

Answers

The ocean's biodiversity also plays a significant role in mitigating the effects of climate change.

Our oceans help reduce the effects of climate change felt on the land and in the atmosphere by absorbing a significant amount of carbon dioxide from the atmosphere. The carbon dioxide reacts with seawater to form carbonic acid. Carbonic acid causes a decrease in the pH of the ocean and can cause ocean acidification.

This process is called carbon sequestration or carbon storage in the ocean. According to researchers, the ocean absorbs up to 25% of the carbon dioxide (CO2) released by human activities, mainly by burning fossil fuels, and helps in reducing the effects of climate change.

The oceans absorb more than 90% of the heat trapped by the increasing concentrations of greenhouse gases in the atmosphere, making the oceans warmer. In this way, the ocean helps regulate the Earth's climate. The ocean is the largest carbon sink on the planet, meaning it stores carbon. Oceans play a crucial role in the Earth's carbon cycle.

As the amount of carbon dioxide in the atmosphere increases, the ocean absorbs more CO2. Carbon dioxide is also dissolved in seawater, resulting in more acidic oceans.

The acidity harms marine organisms and ecosystems. The ocean also supports various species of marine animals and plants, which play a crucial role in regulating the Earth's climate. The marine plants generate oxygen, and the sea creatures consume carbon dioxide during the process of photosynthesis.

Hence, the ocean's biodiversity also plays a significant role in mitigating the effects of climate change.

To know more about climate change refer here:

https://brainly.com/question/28779953#

#SPJ11

true/faslse with the expection of venus, plntery surface tempertures decrease ar greater disnatces from the sun

Answers

True, with the exception of Venus, planetary surface temperatures decrease at greater distances from the sun. This is due to the fact that the sun is the main source of heat for the planets in the solar system, and the amount of heat that reaches each planet is determined by its distance from the sun.

Venus is an exception to this trend. Although it is closer to the sun than Earth, its surface temperature is much higher due to a greenhouse effect caused by its thick atmosphere, which traps heat close to the planet's surface.

In summary, while the general trend is for planetary surface temperatures to decrease with distance from the sun, there can be exceptions such as Venus, where other factors such as atmospheric composition can have a significant impact on temperature.

To know more about planets, refer here:

https://brainly.com/question/13083839#

#SPJ11

Which point is most important for the cartographer to consider before
creating a new map?
O A. Where the equator is located
OB. Goal of the map
O C. How the map will be displayed
OD. Relative size of the map elements

Answers

OD) Relative size of the map elements as scale is the most important

explain a parallel, meridian, latitude, and longitude, indicating where the zero value is for each measurement and identifying important lines of latitude.

Answers

Answer: You've seen lines running across maps your whole life and may not have noticed them. The lines running North to South are called "Meridians" or "lines of longitude" (Figure 2), while the lines running East to West are called "Parallels" or "lines of latitude" (Figure 3).

Explanation:

________ are comprised of members from different geographic areas assembled as needed to collaborate on a certain project.a) work groupsb) virtual teamsc) non-core teamsd) task forcese) command groups

Answers

Task Forces are comprised of members from different geographic areas assembled as needed to collaborate on a certain project. The answer is (d) task forces.

Task forces are temporary teams that are created to work on a specific project or problem. They are composed of individuals who have different skill sets and come from different geographic areas within an organization. Task forces can be established for a variety of purposes such as developing a new product, improving a process, or resolving a crisis. Once the task is completed, the team is dissolved.

The members of the task force return to their previous roles within the organization. Task forces are often used in organizations to leverage expertise from various parts of the organization and to ensure that critical issues are addressed in a timely and effective manner. They are a useful way to bring together diverse perspectives and talents to achieve a specific objective.

Therefore, the correct answer is (d) task forces.

To know more about geographic areas, refer here:

https://brainly.com/question/7202534#

#SPJ11

when someone on earth observes the moon in the first-quarter phase, someone on the moon facing earth observes earth in the question 15 options: new earth phase. third-quarter earth phase. crescent earth phase. full earth phase. first-quarter earth phase.

Answers

When someone on earth observes the moon in the first-quarter phase, someone on the moon facing earth observes earth in the first-quarter earth phase.

When the full illuminated face of the Moon visible on Earth, it is on the Full Moon phase.New moon is the illuminated side of the Moon is away from the Earth. only  the shadowed side can be seen. Waning gibbous               - the Moon is less than fully illuminated, but, is more than half.

Waxing crescent  first sliver of the Moon that we can see. The moon is a natural satellite of Earth. Earth has only one satellite, called moon. Other planets have more satellites.The 1 is No moon phase, and the 2 is crescent moon, the 3 is half moon phase and the 4 is full moon phase.

Learn more about moon

https://brainly.com/question/15637023

#SPJ4

which of the following is a result of seafloor spreading?

a. Trenches form at transform boundaries.

b. Mid ocean ridges form at convergent boundaries.

c. Mid ocean ridges form at divergent plate boundaries

d. Trenches form at divergent boundaries.

Answers

Answer:
C. Mid ocean ridges form at divergent plate boundaries

escoge la respuesta correcta. how is the sky reflected at the salar de uyuni? the sun causes it to reflect all year long. a thin layer of water reflects it during the rainy season. the snow reflects it during the winter season. the salt reflects it all year long.

Answers

The sky is reflected at the Salar de Uyuni in various ways throughout the year. During the rainy season, a thin layer of water reflects the sky, creating a unique and beautiful landscape. In the winter, the snow reflects the sky, further adding to the breathtaking scenery. However, all year long the salt of the Salar reflects the sky, making it shimmer and sparkle in the sun's rays.

This reflection of the sky can be seen from afar and provides a mesmerizing effect as the sun's rays travel across the expanse of the Salar. In the mornings, the sky may be filled with wisps of clouds which are then mirrored in the reflective salt, giving the impression that one is standing on the edge of a large sea. During the evenings, the sky often holds a stunning array of colours, which are similarly reflected in the salt and create an amazing landscape.

The sky is constantly reflecting off the Salar de Uyuni and changing with the changing of the seasons. Whether it is the thin layer of water in the rainy season, the snow in the winter season, or the salt all year long, the reflections of the sky always create a breathtaking landscape that is sure to awe anyone who views it.

To learn more about rainy season here:

https://brainly.com/question/28044728#

#SPJ11

what composition of lava will travel further group of answer choices basaltic rhyolitic andesitic dacitic

Answers

Basaltic lava is the most fluid type of lava and can therefore travel further than other types of lava. This is because basaltic lava is composed of lower viscosity magma that is able to flow over greater distances due to its lower density.

This type of lava is also the most common type of lava, which means it is the most likely to be found on Earth’s surface. Rhyolitic lava is more viscous than basaltic lava and therefore does not travel as far.

This is because rhyolitic lava is composed of higher silica and has a higher viscosity than basaltic lava. Andesitic lava is less viscous than rhyolitic lava, but more viscous than basaltic lava.

Andesitic lava is composed of minerals that create a mix of both low and high viscosity magma. Finally, dacitic lava is the least fluid type of lava and therefore has the shortest travel distance. This is because the minerals in dacitic lava create a high viscosity magma that is not able to flow as far as other types of lava.

In summary, basaltic lava is the most fluid type of lava and is therefore able to travel further than other types

Know more about Basaltic lava here

https://brainly.com/question/10109049#

#SPJ11

what is weathering?????

Answers

Answer:

weathering is the process that breaks down rock on earth's surface

evidence that supports a coastal migration to the americas comes from which source? (select as many as apply)

Answers

The source that provides DNA evidence supporting the idea of a coastal migration to the Americas is human fossils.

Studies of DNA extracted from ancient human remains have provided evidence for the coastal migration theory, which posits that the first humans to arrive in the Americas migrated along the Pacific coast of North and South America, rather than through an inland route.

Specifically, mitochondrial DNA studies of ancient human remains found in North and South America have shown genetic links between these populations and modern-day populations in Southeast Asia and the Pacific Islands, suggesting that the first Americans originated from these regions and migrated along the coastal route.

DNA evidence from plant and animal fossils can also provide information about past environments and migrations, but it is the analysis of ancient human DNA that has been most crucial in supporting the coastal migration theory.

The complete question is:

Which source provides DNA evidence supporting the idea of a coastal migration to the Americas? Is it plant fossils, human fossils, or animal fossils?

To know more about  coastal migration, refer here:
https://brainly.com/question/2600497#
#SPJ11

in hopes of identifying an ancient caldera, what are three specific features that you might look for?

Answers

The three features to look for when identifying an ancient caldera are a central uplift, a basin-shaped depression, and a breached or modified rim.

To identify an ancient caldera, three specific features to look for are central uplift, a basin-shaped depression, and a breached or modified rim.  Central uplift is the initial formation of a caldera due to the collapse of the magma chamber. This feature is the most visible indicator of a caldera and can be characterized by a central peak or cone-shaped elevation.

The basin-shaped depression of a caldera is caused by subsidence of the ground due to the magma chamber being emptied. This is the defining characteristic of a caldera and can often be seen as a large and circular depression.

Finally, a breached or modified rim can be indicative of an ancient caldera. The breach of the rim is usually caused by the erosional forces of streams and rivers, which can erode the caldera rim and create a terrace along its walls. Additionally, a modified rim can indicate the presence of an ancient caldera, as this can be created by further erosion, faulting, and landslides.

To learn more about caldera here:

https://brainly.com/question/28872553#

#SPJ11

weather refers to our day to day temperature here on earth. climate is long term weather for a period of time. we all have different climate. describes the weather.

Answers

Weather refers to our day-to-day temperature here on Earth.  It is the state of the atmosphere in a specific place at a certain moment.

It is expressed in various ways such as the presence or absence of precipitation, wind speed and direction, temperature, and humidity. The elements of weather are dynamic and constantly changing. The weather pattern of a location varies on a regular basis, ranging from day to day to hour to hour. It is the current state of the atmosphere and can change in a short time.

The weather can be severe, like a storm or tornado, or mild, like a bright sunny day.In contrast, climate is long-term weather for a period of time. It refers to the average weather pattern of a particular region over a long period of time, usually at least thirty years. Climate is defined as the average weather condition of a specific location over a long period of time. Climate can be classified based on average temperature, precipitation, and wind patterns, among other factors.

Therefore, weather is the state of the atmosphere at a given moment in time while climate refers to the average weather pattern of a specific region over a long period of time.

To know more about atmosphere click on below link:

https://brainly.com/question/26767532#

#SPJ11

Other Questions
confucianism and buddhism both flourished during the tang and the song dynasties. what evidence from the text helps explain the growth of these belief systems? based on the chart, in which region of the world is an individual the least likely to have access to any basic or limited handwashing facility? the gender gap of economics: why do men think more like economists? evidence from the survey of americans and economists on the economy caplan Which of the following sentences is puncuated correctly? Charles Darwin, a famous scientist m, lived in the nineteenth century a sample of paramagnetic material is located very close to a bar magnet, in a region in which the field of the magnet appears almost uniform over small distances. if the magnet is kept in the same location but rotated in a counter-clockwise direction so that the sample is no longer in the quasi-uniform region of the magnetic field, how will the sample respond? The yard pictured below has algebraic expressions for its side lengths, in metres.Find a simplified algebraic expression for the perimeter of the yard. Use your expression to find the perimeter in meters, if the value of x=3 m . Show your steps. Write an imformative speeh base on a true story give me an example how much work is done lifting a 15 pound object from the ground to the top of a 30 foot building if the cable used weighs 2 pounds per foot You have been asked to build a scale model of your school out of toothpicks. Imagine your school is 30 feet tall. Your scale is 1 ft:1.68 cm.If a toothpick is 6.3 cm tall, how many toothpicks tall will your model be?The model will be toothpicks tall.Your mother is out of toothpicks, and suggests you use cotton swabs instead. You measure them, and they are 7.6 cm tall. How many cotton swabs tall will your model be? If necessary, round your answer to the nearest whole number.The model will be approximately cotton swabs tall. the worker adjustment and retraining notification act (warn) requires firms employing 100 or more workers to notify workers of a large layoff or shutdown at least in advance. a. one month b. six months c. sixty days d. one year hematite (fe2o3) and magnetite (fe3o4) are two ores used as sources of iron. which ore provides the greater percent of iron per kilogram? Describe the New left 4. From the train station, a train travels to the city center at a constant speed of 35 miles per hour.Mrs. Kondo is going to the city center but misses the train. She leaves the train station of anhour later in a taxi. The taxi travels at a constant speed of 50 miles per hour.The train and Mrs. Kondo's taxi arrive at the city center at the same time. How long did it takethe train to travel from the train station to the city center? at school has 320 girls and 250 boys. the probability that a girl is left-handed is 0.2 the probability that a boy is left-handed is 0.1 estimate the number of left-handed students in the school. what is true about the relationship between the creoles and the peninsulares in latin america in the late eighteenth and early nineteenth centuries Mention the most suitable separation technique that may be used to separate the components and explain briefly how separation is achieved under the separation technique. A mixture of sand, table salt and iron fillings Question 6(Multiple Choice Worth 2 points)(Appropriate Measures MC)The line plot displays the cost of used books in dollars.A horizontal line starting at 1 with tick marks every one unit up to 9. The line is labeled Cost in Dollars, and the graph is titled Cost of Used Books. There are two dots above 1, 2, 3, 5, and 6. There are four dots above 7.Which measure of center is most appropriate to represent the data in the graph, and why? The median is the best measure of center because there are no outliers present. The median is the best measure of center because there are outliers present. The mean is the best measure of center because there are no outliers present. The mean is the best measure of center because there are outliers present. simply making flashcards and repeating key-term definitions leads to poorer retention than learning the definitions by understanding their meanings and relating them to other concepts. this can be best explained by: m grade> Y.4 Area and perimeter: word problems JFRA rectangular garage is 6 meters wide and 7 meters long. What is its perimeter? PLSSSS HELP IF YOU TURLY KNOW THISSS