Answer:
A force is a push or a pull. It causes an object at rest to move. It can cause an object that is moving to change speed, or the distance covered over time. It can also change which way the object is moving its direction. Lastly, it can also cause an object to stop moving completely. A force has both magnitude and direction. An object with balance forces or a net force of zero will not change position.
Explanation:
A person rides in an elivator. What is the equal and opposite force for the force of the elevator floor pushing up on the person as described by Newton’s third law?
Answer:
weight of the person and reaction force according to that weight by the elevator
every action has an equal and opposite reaction
Weight of the person and reaction force according to that weight by the elevator is balanced.
What is Newton's third law?According to the third law, when two objects interact, they exert equal-sized and opposite-direction forces upon one another.
A person rides in an elivator then the equal and opposite force for the force of the elevator floor pushing up on the person as described by Newton’s third law and are balanced.
Weight of the person and reaction force according to that weight by the elevator is balanced.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
While helping a friend move, you lift a 176 N box full of books and perform 180 J of work to do so. What distance, directly upward, do you lift the box? Show all your work.
Answer:
d = 1.022 [m]
Explanation:
Work in physics is defined as the product of force by distance. In this way we have the following expression.
[tex]W=F*d[/tex]
where:
W = work done = 180 [J] (units of Joules)
F = force = 176 [N]
d = distance [m]
[tex]d = W/F\\d = 180/176\\d = 1.022 [m][/tex]
WILL MARK BRAINIEST!!!!!! (Fill in the blanks with the possible answers at the bottom)
1. A Shallow __ is a good indicator of tsunamis, but sends data very slowly and cannot detect earthquakes. *
2. A __ is caused by a sudden shift in the ocean crust which displaces the water. *
3. Tsunamis are common at __ plate boundaries, since large earthquakes release the built up pressure, resulting in a quick vertical movement of the plate. *
4. A tsunamis is possible, but unlikely at a __ plate boundary where two plates are moving sideways past each other. *
5. The Indonesian Earthquake of 2004 had a 9.1__, which was the third largest ever recorded in human history. *
ALL POSSIBLE ANSWERS!!!!
A. Earthquake,
B. Tsunami,
C. Magnitude,
D. Sensor,
E. Transform,
F. Convergent,
G. Divergent.
Answer:
Yet Yeet and Yeeeeeet
Explanation:
Increasing the number of turns on the generator coil....? 1 point Increases the voltage output. Does not alter the output voltage. Reduces the output voltage.
Answer:
increases the voltage output
Explanation:
By Increasing the number of turns on the generator coil , the output volatge of a generator increases. However, there are various other methods availbble to increase the output voltage of a generator. Some of these can be
1. By increasing the rpm of generator coil.
2. By using stronger magnets
A piece of wood 400N in weight and 50cm X 30cm X 20cm in size lies on 50cm X 20cm face. Calculate the pressure exerted by it.
Answer:
4kPa
Explanation:
P = force/area
= 400/(0.5×0.2)
= 4000Pa(4kPa)
Answer:
4000pascal
Explanation:preassure = force/area
F = 400N
A = 50cmx 20cm = 1000 cm sq
so we have to convert the area in metre square
so when convert we get the answer 1/10 = 0.1m square
now as per the equation of preassure we have to divide 0.1/400
and then we get the answer 4000pascal.
14. A 3.0 kg metal ball, at rest, is hit by a 1.0 kg metal ball moving at 4.0 m/s. The 3.0 kg ball moves
forward at 2.0 m/s and the 1.0 kg ball bounces back at 2.0 m/s.
(a) What is the total kinetic energy before the collision?
Answer:
The kinetic energy before the collision was 8 J
Explanation:
The given parameters are;
The mass of the metal ball at rest, m₁ = 3.0 kg
The velocity of the ball at rest = 0 m/s
The mass of the metal ball that hits the one at rest, m₂ = 1.0 kg
The velocity of the metal ball that hits the one at rest, v₂ = 4.0 m/s
The velocity with which the 3.0 kg ball moves forward = 2.0 m/s
The velocity with which the 1.0 kg ball bounces back = 2.0 m/s
a) Kinetic energy, K.E. = 1/2 × m × v²
Where;
m = The mass of the of the object in motion
v = The velocity of the object
Before the collision, we have;
Initial K.E. = 1/2 × m₁ × v₁² + 1/2 × m₂ × v₂²
∴ Initial K.E. = 1/2 × 3.0 kg × (0 m/s)² + 1/2 × 1.0 kg × (4.0 m/s) ² = 8 J
The kinetic energy before the collision = The initial K.E. = 8 J.
Derive 3:
v2=u2 + 2as
I HAVE ATTACHED A FILE..
Please find the attached photograph for your answer
help me please ASAP
Answer:
F = 1200 [N]
Explanation:
Torque is defined as the product of force by Radius.
[tex]T=F*r[/tex]
where:
T = torque = 300 [N*m]
r = radius = 50/2 = 25 [cm] = 0.25 [m]
[tex]F=T/r\\F = 300/0.25\\F = 1200 [N][/tex]
Light is one form of energy that travels in electromagnetic waves. This energy is both (1)
and
electrical. There are many different types of electromagnetic (EM) waves. Most of them cannot be seen by humans.
Our eyes see only a small (2)
of EM waves called visible light Visible light is made up of different colors
The colors are red, orange, yellow, green, blue, indigo, and violet. The colors are due to the different (3)
of
light. The (4)
the wavelength, the less energy the wave has. The shorter the wavelength, the more energy
it has. The (5) wavelength of visible light looks red to us the shortest (6)
of visible light looks
vlolet to us
Answer:
Explanation:
Electromagnetic waves are formed by the interference of both electric and magnetic fields. These include: Microwaves, Radio waves, Infrared, Visible, Ultraviolet, X-ray, and gamma rays. These waves can be arranged in a specific order (called spectrum) with respect to their wavelength or frequency. The higher the wavelength, the lower the frequency. And vice versa.
These waves are transverse, and travels at the same speed (speed of light - 3.0 x [tex]10^{8}[/tex] m/s).
In the given question, the answers are:
1 - Magnetic
2 - Region
3 - Refractive indices
4 - Greater
5 - Higher
6 - Wavelength
A -0.6 C charge that moves downward is in a uniform electric field with a strength of 200 N/C what is the magnitude and direction of the force on the charge
Answer:
The magnitude and direction of the force on the charge is 120 N in the direction of the charge.
Explanation:
Given;
magnitude of the charge, q = 0.6 C
electric field strength, E = 200 N/C
The magnitude of the electric force is calculated as;
F = Eq
where;
F is the magnitude of the force
Substitute the given values and solve for F;
F = (200)(0.6)
F = 120 N in the direction of the charge.
Therefore, the magnitude and direction of the force on the charge is 120 N in the direction of the charge.
PLEASE ANSWER WILL MARK BRAINLIEST
Im doing it for free just say something to make meh smile and u get brainliest :3
Answer:
your pretty no matter what others say
Explanation:
Answer:
two bros chillin in a hot tub five feet apart cuz there not gay
Explanation:
do you remember this vine
What are the units of Mass and Weight in the English System? Explain.
Answer:
I tried...
Explanation:
Assuming the English system of mass and weight is the same as the Imperial system, the measurements are:
• 1 pound (lb) = 16 ounces (oz)
• 2,000 pounds (lbs) = 1 ton (T)
I think that's everything?
In the English system, mass is measured in pounds and weight is also measured in pounds. However, it is important to understand the difference between mass and weight.
Mass is a measure of the amount of matter in an object and is a scalar quantity. It does not change with location or gravitational force. In the English system, mass is typically measured using a scale or balance, which compares the object's mass to a standard mass. The pound (lb.) is the unit of mass in the English system.
Weight, on the other hand, is a measure of the force exerted on an object due to gravity and is a vector quantity. It depends on the object's mass and the gravitational force acting on it. In the English system, weight is typically measured using a spring scale or a balance that incorporates a spring. The pound (lb.) is also used as the unit of weight in the English system.
Weight = Mass x Acceleration due to gravity
Mass is measured in pounds (lb.) and weight is also measured in pounds (lb.).It is important to note that weight can vary depending on the gravitational force acting on an object.
Learn more about weight here:
https://brainly.com/question/28221042
#SPJ2
What are organs made of?
O Organs are made of colections of tissues,
O Organs are made of cells, but not tissues.
O Organs are made of collections of other
O Organs are made of muscle and bone.
DONE
Answer:
Organs are made of collections of tissues, which are groups of cells.
Explanation:
Why are we unable to work long without food
Answer:
Without food your not able to produce energy thats why you cannot work so long
A student attempted to measure the specific latent heat of vaporisation of water.
She took the following readings:
First balance reading (g) = 581
Second balance reading (g) = 526
First joulemeter reading (kJ) = 195
Second joulemeter reading (kJ) = 327
Use these results to determine the specific latent heat of vaporisation of water.
Answer:
The latent heat of vaporization of water is 2.4 kJ/g
Explanation:
The given readings are;
The first (mass) balance reading (of the water) in grams, m₁ = 581 g
The second (mass) balance reading (of the water) in grams, m₂ = 526 g
The first joulemeter reading in kilojoules (kJ), Q₁ = 195 kJ
The second joulemeter reading in kilojoules (kJ), Q₂ = 327 kJ
The latent heat of vaporization = The heat required to evaporate a given mass water at constant temperature
Based on the measurements, we have;
The latent heat of vaporization = ΔQ/Δm
∴ The latent heat of vaporization of water = (327 kJ - 195 kJ)/(581 g - 526 g) = 2.4 kJ/g
The latent heat of vaporization of water = 2.4 kJ/g
Why do clownfish rarely go far from their home
Answer:
In the wild, clownfish rarely leave their anemone home. In fact, part of its purpose is to defend the anemone from other fish. However, clownfish bred in aquariums (without an anemone home) may still have this instinct, but it’s much calmer than wild harvested species.
Explanation:
traveling at about 30 mph, how many feet will the average driver cover from the time they see the danger until they hit the brakes
Answer: 75 ft
Explanation:
Breaking distance = Speed²/ 20
= 30²/20
= 45 feet
Stopping distance = Speed + braking distance
= 30 + 45
= 75 ft
A bullet has a speed of 500 m/s as it leaves a rifle. If it is fired horizontally from a cliff 12m above a lake, how far does the bullet travel before striking the water?
If the distance of a force arm (FA) is 4 feet and the resistance arm (RA) is 2 feet, then the mechanical advantage would be
Answer: 2
Explanation:
From the question, we are informed that the distance of a force arm (FA) is 4 feet and the resistance arm (RA) is 2 feet.
Based on the information given, the mechanical advantage would be calculated as:
= Force Arm / Resistance Arm
= 4 feet / 2 feet
= 2
A runner went from 6 m/s and two seconds what was his acceleration
Answer:
is it 3?
Explanation:
Im taking a guess and just dividing 6 and 2
newtons law of gravitation is called a universal law why
Answer:
it is applicable on all bodies having mass and the bodies Will be governed by the same law
Linear momentum is conserved is a system when the net force is equal to
Answer:
zero
Explanation:
The linear momentum is conserved when the system is closed. Therefore, the net force is zero.
Strong magnetic fields created by high currents can result in:910 A. Arc flash B. Arc blast C. Large mechanical stresses that may cause conductors to move D. Shock
Answer:
B. Arc blast
Explanation:
Arc blast are as a result of rapid injection of electrical energy into an arc. These shock waves and arc blast pressure wave at low level can lead to damage of eardrums at lower levels and cardiac arrest at high levels.
Strong magnetic fields created by high currents (> 100 kA) can result to equipment destruction. These arc blast hazards are mostly found in high-energy power circuits and large capacitor banks.
PLEASE HELP! I know the answer to this, but I need an explanation.
Let r be the distance between the man and point Q. He applies a torque of
(r i ) × ((-800 N) j ) = ((-800 N) r ) k
pointing "into the page" with magnitude (800 N) r.
Meanwhile, the rope applies a torque of
((3.0 m) i ) × ((500 N) j ) = (1500 N•m) k
pointing out of the "page" with mag. 1500 N•m
The beam is held in place in a horizontal position, so the torques cancel and
(800 N) r = 1500 N•m
r = (1500 N•m)/(800 N) = 1.875 m ≈ 1.9 m
Which topic are you most likely to find in a physics textbook?
A.
photosynthesis
B.
electricity and magnetism
C.
metals and nonmetals
D.
division of a living cell
E.
ionic, covalent, and metallic bonding
Answer: C. electricity and magnetism
Explanation:
Answer:
B.
electricity and magnetism
is the ans
I find this in physics
Which of the following are possible units for a spring constant?
A. J/m
B. cm/N
C. J/N
D. N/km
Answer:
D
Explanation:
The standard international (SI) unit for spring constant is N/m, so N/km is the same thing but bigger.
help pls physics problem
Answer:
0.4329 seconds
Explanation:
We are given;
Distance; d = 0.635 m
Velocity; v = 3.22 m/s
Angle; θ = 62.9°
To find the time, we have to find the horizontal component of the velocity.
Thus, Vx = 3.22 × cos 62.9
Formula for time is;
t = d/Vx
t = 0.635/(3.22 × cos 62.9)
t = 0.4329 sec
Thus the time he will take to clear the hurdle is 0.4329 sec
Rank this objects in order of their acceleration small to larger
Answer:
The answer is "DACB".
Explanation:
The missing data of the question is defined in the attached file please find it.
Using formula:
[tex]\to F= m \cdot a\\\\ \to m= 5 \ kg[/tex]
In object A:
[tex]F= 15 \\\\a =\frac{F}{m} = \frac{15}{5} = 3[/tex]
In object B:
[tex]F= 30 \\\\a =\frac{F}{m} = \frac{30}{5} = 6[/tex]
In object C:
[tex]F= 20 \\\\a =\frac{F}{m} = \frac{20}{5} = 4[/tex]
In object D:
[tex]F= 0 \\\\a =\frac{F}{m} = \frac{0}{5} = 30[/tex]
That's why the answer is "DACB" .
The level of mercury falls in a barometer
while taking it to a mountain.
Answer:
This is due to a relative decrease in atmospheric pressure in high places.
Explanation:
Given that atmospheric pressure decreases at the higher point or ground, this reduced atmospheric pressure, however, will be unable to contain the Mercury in the barometer tube.
Therefore, at the top of the mountain where the air pressure is low, the barometer reading ultimately goes down.
Hence, the level of mercury falls in a barometer while taking it to a mountain "due to a relative decrease in atmospheric pressure in high places."
An electric heater is rated at 1500 W. If the heater is rated as 80% efficient, calculate the output
rate of energy
Answer:
Power = 1200 [W].
Explanation:
The efficiency of an electrical equipment is defined as the relationship between the power realized, over the power that is consumed. For this case, they give us the data of consumed power and efficiency in this way we can calculate the power that the equipment performs.
[tex]Efficency=\frac{Power_{done}}{P_{consumed}}\\0.8 = \frac{Power_{done}}{1500} \\Power_{done}=1500*0.8\\Power_{done} = 1200 [W][/tex]
This means that of the 1500 [W], 1200 [W] are actually used to get the job done. This is established by means of the first law of thermodynamics.