Answers
Answer:
The correct answer is -
1. D. mold
2. A. Cast
3. F. trace fossil
4. C. original material fossils
5. B. fossil record.
Explanation:
Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.
The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.
Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.
Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.
Fossil records are the fossils ever found or discovered on the earth.
Related Questions
PLEASE HELP!! 10 POINTS!
what could the fourth quantum number of a 2s^2 electron be?
Answers
Answer:
D. ms=+1/2.
Explanation:
Hello there!
In this case, since the quantum numbers are known as:
* Principal quantum number (n) which cannot be zero. The allowed values of n are therefore 1, 2, 3, 4, and so on.
* Angular quantum number (l) is able to be any integer between 0 and n-1. If n = 2, for example, l can be either 0 or 1.
* Magnetic quantum number (m) is able to be any integer between -l and +l. If l = 3, m can be either -3, -2, -1, 0, +1, +2 or +3.
* Spin Quantum Number (ms): ms = +½ or -½. Accounts for the orientation of the spin axis of an electron as it is able to spin in only one of two directions.
Thus, since the fourth quantum number is ms, spin, we infer that the answer is D. ms=+1/2 because it represents the positive spin on 2s^2.
Best regards!
Answer: ms = +1/2
Explanation: a pex
Determine the ions of ammonium, in 870.4x10-23 grams of (NH4)3PO4. Round the results to the tenths.
Answers
Answer: if your trying to say what 4x10-23 is the answer is 17
and if ur also trying to say whats 870.4x10-23 the answer is 8681 have a nice day!
Explanation:
also and what is (NH4)3PO4 if its a file code or link your not allowed to post that
Compare a low-dose rate internal radiation treatment to a high dose rate internal treatment. What do you think are the positives and negatives of each?
Answers
During intracavitary radiation, the radioactive source is placed in a body cavity (space) , such as the rectum or uterus.
With interstitial radiation, the implants are placed in or near the tumor, but not in a body cavity. The implant procedure is usually done in a hospital operating room designed to keep the radiation inside the room. You’ll get anesthesia, which may be either general (where drugs are used to put you into a deep sleep so that you don’t feel pain) or local (where part of your body is numbed).
One or more implants is put into the body cavity or tissue with an applicator, usually a metal tube or a plastic tube called a catheter. Imaging tests (an x-ray, ultrasound, MRI, or CT scan) are usually used during the procedure to find the exact place the implant needs to go.
Before being placed, implants are kept in containers that hold the radiation inside so it can’t affect others. The health professionals handling the implants may wear special gear that protects them from exposure once the implants are taken out of the container. High-dose-rate (HDR) brachytherapy allows a person to be treated for several minutes at a time with a powerful radioactive source that’s put in the applicator. The source is removed after 10 to 20 minutes. This may be repeated twice a day over a few days, or once a day over the course of a few weeks. The radioactive material is not left in your body. The applicator might be left in place between treatments, or it might be put in before each treatment.
People getting HDR sometimes stay in the hospital if it involves multiple day treatments and if the applicator is left in place. There may be special precautions to take after the treatment, so be sure to talk to the cancer care team about this. In this approach, the implant gives off lower doses of radiation over a longer period.
Some implants are left in from 1 to a few days and then removed. You’ll probably have to stay in the hospital, sometimes in a special room, during treatment. For larger implants, you might have to stay in bed and lie still to keep it from moving.
Some smaller implants (such as the seeds or pellets) are left in place and never taken out. Over the course of several weeks they stop giving off radiation. The seeds or pellets are about the size of rice grains and rarely cause problems. If your implants are to be left in, you may be able to go home the same day they’re put in. There may be special precautions to take, so be sure to talk to the cancer care team about this.
How many formula units are in 2.0 moles of Fe(NO3)2?
Answers
Answer:
1.2 x 10>24 (2.0)(6.022 x 10>23)
Explanation:
How many formula units are in 2.0 moles of Fe(NO3)2?
Mole measure the number of elementary entities of a given substance that are present in a given sample. 12.044×10²³ formula units are in 2 moles of Fe(NO₃)₂.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. Mole is inversely proportional to molar mass.
Mathematically,
Mole of Fe(NO₃)₂. =given number of atoms of Fe(NO₃)₂.÷ 6.022×10²³(Avogadro number)
mole of Fe(NO₃)₂= 2moles
Substituting the values
2=number of atoms of Fe(NO₃)₂.÷ 6.022×10²³
Number of atoms of Fe(NO₃)₂.=2×6.022×10²³
Number of atoms of Fe(NO₃)₂.=12.044×10²³
Therefore, 12.044×10²³ formula units are in 2 moles of Fe(NO₃)₂.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ3
Predict what happens when tin metal is placed into
a solution of nickel(II) iodide.
A. Tin(II) iodide forms
B. Tin metal dissolves
C. Nothing
D. Both a and b happen
E. Nickel is plated onto tin
Answers
Answer:
I would say A but I'm not sure
When tin metal is placed into a solution of nickel (II) iodide then nothing will occur.
What is reactivity series?Reactivity series of the metals tells about the increasing or decreasing orders of the reactivity of the metals.
According to the reactivity series, reactivity of nickel metal is more than the tin metal. So, if we add tin metal in the solution of nickel (II) iodide then no reaction occurs. Because the reactivity of tin is less as compare to nickel metal so it is not possible for tin to replace the nickel metal and get dissolve.
Hence, option (C) is correct i.e. nothing.
To know more about reactivity series, visit the below link:
https://brainly.com/question/17469010
The half life of potassium 40 is approximately 1.25 billion years. An igneous rock is found to contain about 1/4 of its original mass of potassium 40. The approximate age of the rock is _____ billion years.
Answers
Answer:
2.5 billion years
Explanation:
what is geography in science
Answers
Select the correct answer.
Which statement best describes how chemical equations demonstrate conservation of mass?
A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.
Answers
"C" is correct.
The Law of Conservation of Mass states that matter can be neither created nor destroyed. This is evident in chemical equations as you will always start and end with the same amount of atoms of every element. They are all still there; they have just been rearranged.
Answer: C) The number of atoms of each element is the same on each side of the equation.
Explanation: Mass cannot be created nor destroyed.
describe the three main concepts that make up cell theory
Answers
Explanation:
1.All living organisms are composed of one or more cells
2. The cell is the basic unit of structure and organisation in organisms
3.Cells arise from pre-existing cells
During a tug-of-war, the rope accelerates towards the left. What is true about the forces acting on the rope?
Answers
Explanation:
Forces are given many names, such as push, pull, thrust, lift, weight, friction, and tension. Traditionally, forces have been grouped into several categories and given names relating to their source, how they are transmitted, or their effects. The most important of these categories are discussed in this section, together with some interesting applications. Further examples of forces are discussed later in this text.
Which best describes the relationship between the terms frequency, wavelength, and hertz?
Answers
Answer:
The correct answer is - Frequency is the number of wavelengths, which is measured in hertz.
Explanation:
Frequency is the number of waves that go through a fixed point at a particular time. Hertz is the SI unit for frequency which means that one hertz is equal to a unit number of waver passes in a unit time to a fixed point.
As the frequency of a wave increases which means the number of waves increases in the unit time, the shorter the wavelength will be.
a higher frequency wave has more energy than a lower frequency wave with the same amplitude.
65 g of NaOH is dissolved to make 500 mL of solution. Find moles of NaPH and Molarity of solution.
Answers
Answer:
3.25 M
Explanation:
Number of moles = mass/ molar mass
mass of NaOH = 65 g
Molar mass of NaOH = 40 g/mol
Number of moles of NaOH = 65g/40 g/mol = 1.625 moles
Let us recall that;
n = CV
n = number of moles of solute
C = concentration of solution
V = volume of solution
C = n/V
n = 1.625 moles
V = 500/1000 L = 0.5 L
C = 1.625 moles/0.5
C = 3.25 M
How can the strength of an acid be determined using titration? (100 POINTS!)
Answers
Answer:
Explanation:
A titration in general is used to determine the concentration of something with a solution of known solution. For acid, a base solution of known concentration is added slowly. The end-point is determined by using a pH indicator. When the acid is neutralized at the end, note the amount of base solution used and the strength of acid can be calculated.
Note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.
What is titration?Titration is a method of chemical analysis where the quantity of a sample's constituents is established by adding a precisely measured amount of something else with which the component that is wanted will react in a specific, known proportion.
A burette, which is essentially a long, graded measurement tube with a stopper and a tube for injection at its bottom end, is used to gradually administer a standard solution of titrating reagent, and titrant, to a specified concentration. When the point of equal value is achieved, the addition is terminated. Note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.
Therefore, note that the quantity of base solution utilised and the acid strength can be estimated after the acid has been neutralised.
To know more about titration, here:
https://brainly.com/question/24704707
#SPJ2
Explain what helps convert non-rich oxygen blood cells back to oxygen rich cells?
Answers
Answer:
As blood travels through the body, oxygen is used up, and the blood becomes oxygen poor. Oxygen-poor blood returns from the body to the heart through the superior vena cava (SVC) and inferior vena cava (IVC), the two main veins that bring blood back to the heart.
Explanation:
A chemical equation representing the reaction of water (HOH) and hydrochloride acid (HCI) is shown.
HOH + HCl + Cl + H2O
Which of the following statements best explains the chemical action of the reactants in the equation?
Answers
Answer:
That is Hydrolysis reaction.
[tex]HCl _{(aq)} \: + \: _{(aq)} \: - - > \: H ^{ + }_{(aq)} \: + \: Cl {}^{ - } _{(aq)}[/tex]
PLZ HELP!
Where have you seen or known of examples of waves in your life? Based on science terms of a wave.
Answers
Answer:
I answered this in your recent post of this question.
Explanation:
Hope that this helps you out! :)
If you have any questions please put them in the comment section below this answer.
Have a great rest of your day/night!
Please thank me on my profile if this answer has helped you.
A student prepares four different aqueous NaCl solutions according to the table. Which solution will have the highest molarity?
Answers
Answer:
what did you end up guessing
Explanation:
Materials that allow electrons to move easily from atom to atom are called _____________.
Answers
Answer:
Explanation:
conductors
Your welcome
PLEASE HELP
The theory of plate tectonics is supported by evidence that crustal plates move relative to each other. How does this observation support the theory of plate tectonics?
It suggests that plates are dragged around by ocean currents.
It suggests that plates are dragged around by air currents.
It suggests that plates can move independently of one another.
It suggests that plates cannot move independently of one another.
Answers
Answer:
non independantly
Explanation:
Scientists create models for all of the following reasons, EXCEPT
A - because a model can represent objects too large to comprehend
B - because a model can help to communicate their ideas
C - because a model is the only way to conduct an experiment
D - because a model is the only way to represent objects too small to see
Answers
Thus, the correct answer choice here would be C.
How many milliliters of 4.00 M NaOH are required to exactly neutralize 50.0 milliliters of a 2.00 M solution of HNO3 ?
Answers
Answer: The volume of [tex]NaOH[/tex] required is 25.0 ml
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]HNO_3[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]HNO_3[/tex] solution = 2.00 M
[tex]V_1[/tex] = volume of [tex]HNO_3[/tex] solution = 50.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 4.00 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = ?
Putting in the values we get:
[tex]1\times 2.00\times 50.0=1\times 4.00\times V_2[/tex]
[tex]V_2=25.0ml[/tex]
Therefore, volume of [tex]NaOH[/tex] required is 25.0 ml
The volume of 4.00 M NaOH is required to exactly neutralize 50.0 ml of a solution of a 2.00 M solution of [tex]HNO_3[/tex] is 25.0 ml.
What is [tex]HNO_3[/tex]?[tex]HNO_3[/tex] is nitric acid also known as the spirit of niter. It is colorless in its original form but appears yellow-colored.
By the neutralization law
[tex]n_1M_1V_1 = n_2M_2V_2[/tex]
n1 = 1
M1 = 2.00
M2 = 4.00
V1 = 50.0 ml
n2 = NaOH = 1
Putting the value in the formula
[tex]1 \times 2.00 \times 5.00 ml = 1 \times 4.00 \times V_2\\\\V_2 = 25.0\; ml[/tex]
Thus, the volume of NaOH required is 25.0 ml.
Learn more about nitric acid
https://brainly.com/question/26015251
Why do we not use molecular formulae for polymers?
Answers
Answer:
Polymers are long chain molecules that occur naturally in living things and can also be made by chemical processes in industry. Plastics are polymers, so polymers can be extremely useful.
Explanation:
1. The production of a slightly soluble solid compound in a double-
displacement reaction results in the formation of a
a. gas.
b. precipitate.
C. combustion reaction.
d. halogen.
Answers
Answer: precipitate
Explanation:
a ceiling fan's blades collect dust faster than other objects in a room. the constant pushing and rubbing against the air provide a cool breeze for the people in the room. what causes the ceiling fan´s blade to collect dust so quickly.
Answers
As the blades rotate, they experience frictional forces as they `rub' against the air; this knocks electrons around, causing the blades to build up a net charge. The charged dust particles then stick to the charged areas of the blades. "The leading edge of the blades usually develops the thickest layer of dust.
To solve this we must be knowing each and every concept related to dust. Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
What is dust?Dust stirred up by automobiles on the road may account for 33% overall air pollution. Deposits of vehicle or commercial exhaust gas, particles through tire and braking wear, dust from paved streets or potholes, plus dust from building sites all contribute to road dust.
As the blades revolve, frictional forces cause them to 'rub' against the air, knocking electrons around and allowing the blades to accumulate a net charge. The electrified dust particles are subsequently attracted to the charged portions of the blades. Typically, the sharp end of the blades creates the heaviest coating of dust.
Therefore, frictional forces allow the ceiling fan´s blade to collect dust so quickly.
To know more about dust, here:
https://brainly.com/question/29761987
#SPJ2
What number represents a mole?
5
1
4
14
8
6
19
Answers
Can someone help me ❤️❤️❤️
Answers
Answer:
i think the answer would be C
Explanation:
no matter what you do to the jar the mass will stay the same. unless you add more nails
1.The symbol of an atom changes when the number of _______
changes.
2.The net charge of an atom depends on ___________ and
_________.
3.The atom is neutral when ________ and _________ are equal.
4.The mass number of an atom depends on __________ and
_________.
Answers
Answer:
1. proton
2. electrons and protons
3. protons and electrons
4. protons and neutrons
Explanation:
Which of these is a learned behavior of a dog?
1.Begging for food
2.Drinking water
3.Panting on a hot day
4.Chewing on a bone
Answers
What is an action citizens can take to prevent energy waste?
Answers
Answer:
Turning the lights off when they're not needed.
if the solution is acidic, which ion is found in greater concentration?
Answers
Answer:
An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure water.
The acidic solution indicates the highest concentration of hydrogen or the proton ion in the solution.
What is acidity?Acidity is the measure of the hydrogen ion in the solution by the pH scale and gives the acidic or basic characteristics to the solution.
The concentration of the hydronium or the hydroxide in the solution is a way to determine the acidic basic nature and the pH and pOH of the solution.
Therefore, in an acidic solution hydrogen ions are in the greatest concentration.
Learn more about acid here:
https://brainly.com/question/24194581
#SPJ2