Pls help first person to answer correct become brainliest

Answer:

Potential

Explanation:

The most accurate term is Electrostatic potential energy

It's named like this because the force between charges or electrons is called electrostatic force .

Answer:

C

Explanation:

I would have to say C because the girl is constantly moving in the act of serving the volleyball.

Answer:

See below

Explanation:

Torgue = f * distance    basically ...so if you want to increase torque with same  f   then the distance ( lever arm)  must be increased

To increase the torque applied on a lever without exerting any more force, the length of the lever arm must be increased.

Torque is defined as the rotational analogue of force. It is the product of the applied force and the perpendicular distance.

Here,

A lever is a simple machine composed of a stiff beam and a fulcrum. Both the load and the effort are applied to the beam's ends (input force and output force, respectively).

The location on which the beam pivots is known as the fulcrum. When a force is exerted on one end of a lever, the opposite end of the lever experiences a load.

The expression for the torque acting on a lever arm is given by,

Torque, τ = Length of lever arm x Force applied

τ = L x F

From the equation, it is clear that the torque acting on the lever arm is directly proportional to its length.

τ ∝ L

Therefore, as the length of the lever arm increases, the torque applied also increases.

Hence,

To increase the torque applied on a lever without exerting any more force, the length of the lever arm must be increased.

To learn more about torque, click:

https://brainly.com/question/31709810

#SPJ2

Answer:

a) the result capacitor

ct=c1+c2+c3+c4

ct=2×10^-6+4×10^-6+6×10^-6+8×10^-6

ct=20×10^-14

b)q=ct×v

q=20×10^-14×50

q=1000×10^-14 c

Explanation:

c)v1=q/ct

v1=1000×10^-14/20×10^-14

v1=50 volt

v2=

For a disk whose rotational inertia is 450 kg.m2 hangs from a wire whose torsion constant is 2300 N.m/rad, the angular acceleration is mathematically given as

a =  1.176 rad/s^2

Generally, the equation for the angular acceleration  is mathematically given as

a = torsion constant x theta/inertia

therefore,

a =  2300 x 0.23/450

a =  1.176 rad/s^2

In conclusion, the  angular acceleration  is

a =  1.176 rad/s^2

Read more about acceleration

https://brainly.com/question/605631

The force constant that is needed to produce a period of 0.500 s for a 0.0150-kg mass is 2.37 N/m

Period (T) = 0.5 s

Mass (m) = 0.015 Kg

Pi (π) = 3.14

Spring constant (K) =?

The spring constant can be obtained by using the formula for calculating the period of simple harmonic motion. This is illustrated below

T = 2π√(m /K)

Square both side

T² = 4π²m / K

Cross multiply

T² × K = 4π²m

Divide both side by T²

K = 4π²m / T

K = (4 × 3.14² × 0.015) / 0.5²

K = 2.37 N/m

Learn more about spring constant:

https://brainly.com/question/9199238

#SPJ1

Answer:

√h₁/h₂

Explanation:

In free fall, the square of the time taken by the body is directly proportional to the height from which it is dropped.

Ratio

According to second equation of kinematics for free fall

So

[tex]\\ \rm\Rightarrow h\propto t^2[/tex]

[tex]\\ \rm\Rightarrow h_1:h_2::t_1^2:t_2^2[/tex]

[tex]\\ \rm\Rightarrow t_1:t_2::\sqrt{h_1}:\sqrt{h_2}[/tex]

By Hooke's law, the spring exerts a restoring force with magnitude F when compressed by a distance x according to

F = kx

where k is the spring constant. Solve for k :

k = F / x = (108.0 N) / (0.0191 m) = 5654.45 N/m

Now solve for F when x = 0.0440 m :

F = (5654.45 N/m) (0.0440 m) = 248.796 N ≈ 249 N

The Federal Reserve helps to regulate the economy of the United States. So, the correct option is D.

Marketing is defined as the activities done for promoting the products through creating offers and communicating to the customers.

Here,

The Federal Reserve of the United state is functioning as a Central Bank, such that they are maintaining the financial aspects of the system.

The Federal Reserve has a great role in regulating the financial system and at the same time, the establishing of the monetary policies.

The primary functions of the Federal Reserve includes the functions of maintaining the banking operations and reliable payments for the system.

Hence,

The Federal Reserve helps to regulate the economy of the United States.

To learn more about marketing, click:

https://brainly.com/question/13414268

#SPJ7

Answer:

silver

Explanation:

It is because it contains a higher number of movable atoms ( free electrons)

Answer:

The photoelectric effect is a phenomenon in which the photoelectrons are emitted from the metal when an incident electromagnetic wave hits the metal. The incident light should have a threshold frequency to meet the work function of the metal

Answer:

10g to kg=0.01

20×0.01=0.2

Force of 0.2N

Answer:

Explanation:

          ρ =

making mass subject of formula we have

 m=ρv

from the question aluminium and zinc have same mass hence we can say;

The magnitude of the electric field will be 64.38 V/m. Mathematically, the electric field is found as the ratio of the voltage per unit length.

A physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field, either attracting or repelling them, is referred to as an electric field.

The magnitude of the electric field in terms of the pointing vector for this wave  is found as;

[tex]\rm E_{MAX} = \sqrt{S \times c \times \mu_0 }[/tex]

Where,

E is the electric field

c is the speed of light

[tex]\mu_0[/tex] is the permeability

On Putting the given data ;

[tex]\rm E_{MAX} = \sqrt{11.0 \times 3 \times 10^8 \times 4 \times \pi \times 10^{-7}} \\\\\ \rm E_{MAX} =\sqrt{4144.8} \\\\ E_{MAX} =64.38 \ V/m[/tex]

Hence, the magnitude of the electric field will be 64.38 V/m.

To learn more about the electric field refer to the link;

https://brainly.com/question/26690770

#SPJ1

Answer:

The dynamo has a wheel that touches the back tyre. As the bicycle moves, the wheel turns a magnet inside a coil. This induces enough electricity to run the bicycle's lights. The faster the bicycle moves, the greater the induced voltage - and the brighter the lights.

Because of the bicycle's actions, the wheel turns a magnet internal a coil. This induces enough strength to run the bicycle's lighting fixtures. The faster the bicycle movements, the greater the caused voltage - and the brighter the lights.

A trendy dynamo creates an instantaneous modern-day (DC) – a one-directional waft of electrical rate. A bicycle dynamo creates an alternating current (AC), which reverses course from time to time.

A dynamo is a tool normally positioned inside the hub of a motorcycle's wheel that converts the energy generated by means of the wheel spinning to electric power. That energy is then used to run front and rear dynamo lights at the bike, offering constantly-on illumination without the want to change the lighting.

Learn more about alternating current here: https://brainly.com/question/10715323

#SPJ2

Answer:

D

Explanation:

Gravity is a force that pulls objects down toward the ground. When objects fall to the ground, gravity causes them to accelerate. Acceleration is a change in velocity, and velocity, in turn, is a measure of the speed and direction of motion.

A=9.8m/s^2 or the gravitational accelerational

If a stone dropped from the roof of a single-story building to the surface of the earth speeds up because of an almost constant force of gravity acting upon it,there4fore the correct answer is option D.

It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,

For any free-falling object, the acceleration due to gravity is constatant.

The correct response is option D if a stone thrown from the roof of a one-story structure to the surface of the ground accelerates due to an almost constant force of gravity acting upon it.

To learn more about gravity from here, refer to the link;

brainly.com/question/4014727

#SPJ2

Answer:

-2.25

Explanation:

v=u+at

0=9+a(4)

9+4a=0

4a=-9

a= -2.25

the rate of acceleration of the car coming to a stop is 2.25 m/s².

speed is described as. the pace at which an object's location changes in any direction. Speed is defined as the distance traveled divided by the travel time. Speed is a scalar quantity because it just has a direction and no magnitude.

given, A person driving in a neighborhood traveling 9 m/s slows to a stop (0 m/s) over 4 seconds as they approach a stop sign.

The acceleration of the car can be calculated using the formula:

acceleration = (final velocity - initial velocity) / time

Here, the initial velocity is 9 m/s (the speed at which the car was traveling before braking),

the final velocity is 0 m/s (the speed at which the car comes to a stop), and the time taken to stop is 4 seconds. Substituting these values into the formula,

we get:

acceleration = (0 m/s - 9 m/s) / 4 s

acceleration = -9 m/s / 4 s

acceleration = -2.25 m/s²

The negative sign indicates that the car is decelerating, or slowing down.

Therefore, the rate of acceleration of the car coming to a stop is 2.25 m/s².

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ6

Answer:

The three best answers are:

Electric fields can be positive or negative  (depending on source)

Electric fields can attrace or repel objets         (assuming the object is charged)

Electric forces are strongest near the charged object       E ∝ 1 / R^2

For a vertical spring launcher is attached to the top of a block and a ball is placed in the launcher, the position of the ball will be  behind the box

Generally, the equation for the  conservation of momentum principle  is mathematically given as

(M+m) V1 = M*V2

Therefore, with the ball moving forward we have that; the ball at top it wii be behind the box,

Read more about Motion

https://brainly.com/question/605631

Answer:

Above and to the left of the spring launcher

Explanation:

The ball would be to the left of the box because the box is moving to the right at a constant speed. And when the ball goes and reaches its maximum height, the box would have passed the ball.

Answer:

nothing

Explanation:If you ride a bike around the block and return to the exact point where you started, your displacement is zero.

By definition, displacement involves changing an object from its original position. No matter how far or for how long a body moves, if it returns to the position it started from, it has not been displaced at all. This means that the body has zero displacements.

Answer:

I believe the answer is esophagus

Answer:

(d) is not affected practically

Explanation:

A bird sitting on a high power line is not affected practically.

This is because both of its legs are at the same potential, and current cannot flow through its body.

Answer:

option D

Explanation:

The bird sitting on a high power line but the bird is not touching ground by its body parts .

Hence there is no way electricity can pass through its body to earth

Thus it won't get any shock .

Each point along the track of one solar mass star represents the star's surface temperature and luminosity at one time.

A star having a mass equal to the mass of the Sun is called a one-solar mass star.

Its life track shows the luminous intensity as well as the surface temperature.

Learn more about one-solar mass star.

https://brainly.com/question/14984575

#SPJ1

Explanation:

Comets are mostly made of ice and dust

Answer:

The main difference between asteroids and comets is their composition, as in, what they are made of. Asteroids are made up of metals and rocky material, while comets are made up of ice, dust and rocky material. Both asteroids and comets were formed early in the history of the solar system about 4.5 billion years ago.Explanation:

The time required to move from the equilibrium position directly to a point a will be 0.879 sec.

The period is the amount of time it takes for a particle to perform one full oscillation. T is the symbol for it. Taking the reciprocal of the frequency yields the frequency of the oscillation.

The standard equation for the SHM is found as;

[tex]\rm x = asin \omega t \\\\ \rm 12.3 \times 10^{-2} = 18.0 \times 10^{-2}sin \omega t \\\\ 0.6833=sin \omega t \\\\ \omega t =sin^{-1}0.6833 \\\\ \omega t =0.7522 \\\\ t = \frac{0.7522}{0.855 } \\\\ t=0.879\ sec[/tex]

Hence the time required to move from the equilibrium position directly to a point a will be 0.879 sec.

To learn more about the period of oscillation refer to the link;

https://brainly.com/question/14394641

#SPJ1

The characteristics shared by both heating and cooling curves is that phases changes when the temperature stays the same.

Heating is the process by which the temperature of a place or substances or object is increased.

Cooling Is the process of lowering the temperature of a substance or object by using conditioners or by freezing .

Therefore, The characteristics shared by both heating and cooling curves is that phases changes when the temperature stays the same.

Learn more about heating and cooling below.

https://brainly.com/question/9938370

#SPJ1

Answer:

the answer will be about 126 rad/s

Explanation:

If everything lies perfectly for superposition to occur, the force on a car is 1000 N.

Superposition is the phenomenon of placing one wave over the other so that they coincide. The resultant force will be zero.

The force in kg will be

1mteric ton = 1000 kg

1metric ton per m²= 1000 N

1000 N force is applied to a car, which will be equal and opposite to the massive wave.

The equal force will act on a car equal to 1000 N.

Learn more about Superposition

https://brainly.com/question/12493909

#SPJ1