PLSS HELP!! Are these True or False questions

The time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.

To calculate the time it takes for the mass to reach the new equilibrium position, you will need to know the spring constant of the spring. The spring constant, denoted by the letter k, is a measure of the spring's stiffness, and it is related to the force required to stretch the spring by a certain distance. If the spring constant is not given, it can not be calculated.

Once you have the spring constant, you can use the equation:

T = 2π √(m/k) where,

The spring constant (k) can be found by using the equation:

F = kx where,

In this case, the force is equal to the weight of the mass, which is m*g, where m is the mass and g is the acceleration due to gravity.

mg = kx

or, k = (m*g)/x

or, k = (1.65 kg * 9.8 m/s^2) / 0.215 m = 74.65 kg/s^2

Now that we know the spring constant, we can use the equation:

T = 2π √(m/k)

To find the time it takes for the mass to reach the new equilibrium position, where T is the period of oscillation, m is the mass of the object attached to the spring, and k is the spring constant.

T = 2π √(1.65 kg / 74.65 kg/s^2) = 0.15 sec

So the time it takes for the mass to reach the new equilibrium position is approximately 0.15 seconds.

Learn more about Hook's law here:

https://brainly.com/question/2648431

#SPJ4

The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is 50 J.

option A is the correct answer.

A lever is a simple machine that makes work easier and faster. When a lever is used, a small effort will be used to overcome a large load.

The efficiency of a machine increases when the output force is greater than the input force.

Mathematically, the formula for the efficiency of a machine is given as;

Eff = ( output force / input force ) x 100 %

The output force is given by the following formula;

F ( out ) = load x distance moved by load

The input force is given by the following formula;

F ( input ) = effort x distance moved by effort

The work that would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters is calculated as;

work = ( 600   x 6  ) / ( 12  x 6  )

work = 50 J

Learn more about lever here: https://brainly.com/question/416386

#SPJ1

Answer:

600 J

Explanation:

The work is not equal to the initial work divided by the effort arm.

The new force of attraction is 324N if the distance between the centres of the two objects is reduced by a factor of 3e.

The equation for the force of gravitational attraction between two objects is: F = G*(m1*m2)/r^2 Where F is the force of attraction, G is the gravitational constant (6.67 x 10^-11 Nm^2/kg^2), m1 and m2 are the masses of the two objects, and r is the distance between their centers. If the distance between the two objects' centers is decreased by a factor of three, the new force of attraction will be: F' = G*(m1*m2)/(r/3)^2The ratio of the new force of attraction to the original force of attraction is:

F'/F = (r/3)^2 If we substitute in the original force of attraction, we have:

F'/36 = (r/3)^2 = F' = 36 * (r/3)^2

As we decrease the distance by a factor of 3, the new force of attraction will increase by a factor of 9.

F' = 36*9 = 324 N

Therefore, the new force of attraction is 324 N.

Learn more about gravitational attraction here:

https://brainly.com/question/19822389

#SPJ4

Therefore, entropy is the measure of the disorder of a system.

To learn more about entropy refer to:

https://brainly.com/question/6677611

#SPJ4

Answer:

The action of rotating around something like for ex.. Child A stands in the middle of a room while Child B goes around Child A, Child B is rotating around Child A. Another ex. is; The earth rotates around the sun every 365 days the earth is rotating or going around the sun in a circle. So rotating to me is the act of rotating around something in any way shape or form.

PS: A middle schooler answered this so if you don't wanna believe me or think I'm wrong because I am younger you do you.

94.32m/s is the average speed (in m/s) of the blade tip in the helicopter's frame of reference.

We discover that the sub average is 73.3 metres per second after entering this formula into our calculator and finding it to three significant numbers. The helicopter blade tip travels at an average speed of that.

After one revolution, the blade point has moved nothing since it goes back to its original position. The average velocity is consequently zero.

FPM = RPM x . 262 x Blade Diameter (inches).

FPM = 120 x . 262 x 3.00 = 94.32m/s

To know more about average speed visit:-

https://brainly.com/question/12322912

#SPJ4

The magnitude of the net displacement for the day depends on the total distance traveled and the direction in which traveled.

What do you mean by Magnitude?

Magnitude is a measure of the size or intensity of a physical quantity. It is typically expressed in terms of a numerical value and a unit. Examples of physical quantities with magnitude include speed, acceleration, force, energy, pressure, and power. Magnitude is a measure of the size or intensity of a physical quantity, and is typically expressed in terms of a numerical value and a unit.

Step 1: Find the resultant displacement vector by adding the vectors.

S total = S morning + S afternoon

= (2100 m , east) + (3000 m north) + (200 m , vertical) + (1400 m , west) + (2900 m , north) - (400 m , vertical)

Step 2: Simplify the vector.

S total = (700 m , east) + (5900 m , north) - (200 m , vertical)

Step 3: Calculate the magnitude of the resultant vector.

|S total | = √(700 m)^2 + (5900 m)^2 + (-200 m)^2

|S total | = √(490000 m^2 + 348400 m^2 + 40000 m^2)

|S total | = √(882400 m^2)

|S total | = 939.4 m

Hence, the magnitude of the net displacement is 939.4 m.

To know more about magnitude,

https://brainly.com/question/29489126

#SPJ4

The heat energy of the substance option (A) -1700J is correct.

We are given that,

Heat of fusion of a substance = ΔHf = 42.5J/g

Mass of the substance = m= 40g

The latent heat of fusion is the quantity of heat required to transform one gramme of a substance from a solid to a liquid. But in this case, it's important to figure out how much heat is released as liquid copper solidifies. So, ΔHf = -42.5 J/g

Thus , we have to calculated here the heat energy of the substance by the formula,

q = m·ΔHf

Where, q is heat energy ,m is mass ΔHf is the heat of fusion of a substance,

q = m·ΔHf

q = -42.5 J/g× 40g

q = -1700J

Therefore , the heat energy of the substance would be option (A) -1700J

To know more about heat

https://brainly.com/question/19531870

#SPJ4

The force exerted on the rope by the ceiling is in the vertical direction. This means that the force is pushing straight down on the rope and is perpendicular to the plane of the ceiling.

The force exerted on the rope by the ceiling is the result of the gravity of the rope itself and the weight of any objects or materials that are attached to the rope.

In order for the force to remain in the vertical direction, the rope must be secured at the top of the ceiling and not allowed to move in any other direction. If the rope were to move in any other direction, the force exerted on the rope by the ceiling would no longer be in the vertical direction and the rope would no longer remain secure.

Learn more about force:

https://brainly.com/question/25239010

#SPJ4

The kinetic energy does the work that crushes the car’s crumple zones.

Conversion of collision energy Because the metal plastic deformation after the impact greatly increases the internal energy of the automobile, the majority of the kinetic energy in the collision process is turned into internal energy. Other types of kinetic energy are turned into heat energy, sound energy, and so on.

A serious vehicle accident can result in PTSD, acute anxiety, sadness, and crippling phobias. According to studies, crash-related mental traumas might have symptoms that continue up to a year following a car accident, especially in youngsters. Objects with potential energy, or stored energy, collide, and the energy transfers to kinetic energy, or the energy of an object in motion. This energy transfer from one to anotheanother


To learn more about Energy States to refer:
https://brainly.com/question/2289096
#SPJ1

Because alkylbenzenes, phenols, and thiophenols all share an aromatic hydrocarbon constituent, the answer to this question is A.

Compounds 1 and 2 are both used to create liposomes, and their kinetics are controlled. Compound 1 are controlled kinetically, whereas those made from Compound 2 are controlled thermodynamically. UV lasers like nitrogen lasers (337 nm) and frequency-tripled and quadrupled Nd:YAG lasers are frequently used in MALDI methods (355 nm and 266 nm respectively). An artificial substrate for lactase is hydrolyzed to extract lactase from dietary supplement tablets, which is then measured using a colorimetric assay (ortho-nitrophenol-beta-D-galactopyranoside, ONPG). Because alkylbenzenes, phenols, and thiophenols all share an aromatic hydrocarbon constituent, the answer to this question is A.

The complete question is- What is the reading of the energy meter in Figure 1 when an appropriate laser is used in PAC to dissociate a particular chemical bond?

Learn more about hydrocarbon here-

https://brainly.com/question/17578846

#SPJ4

Answer:

(A)²

Explanation:

Atomic mass = density*volume of atom.

So, density of nucleus is in depend of mass number

d=

3

4

πr

3

Massno.

=

3

4

π×[1.3×10

−13

×A

1/3

]

3

A

=constant∗A

0

as R=R

0

A

1/3

(R

0

=1.1×10

−15

m)

The numerical value of the density of a nucleus of atomic number A is determined as 2.29 x 10¹⁷ kg/m³.

The density of the nucleus of atomic number A​ is calculated as follows;

ρ = m/V

where;

[tex]\rho = \frac{m}{V} \\\\\rho = \frac{m}{\frac{4}{3} \pi r^3} \\\\\rho = \frac{1.66 \times 10^{-27}}{\frac{4}{3} \pi (1.2 \times 10^{-15})^3} \\\\\rho = 2.29 \times 10^{17} \ kg/m^3[/tex]

Thus, the numerical value of the density of a nucleus of atomic number A is determined as 2.29 x 10¹⁷ kg/m³.

The complete question is below:

​find the numerical value of the density of a nucleus of atomic number A​ with a radius of  1.2 x 10⁻¹⁵ m and mass of 1.66 x 10⁻²⁷ kg.

Learn more about density here: https://brainly.com/question/6838128

#SPJ6

The characteristics which I would suggest are the planet should be dense, solid and located near star.

All the eight planets of the solar system move around the sun in fixed paths. These paths are elongated. They are called orbits. Mercury is nearest to the sun. It takes only about 88 days to complete one round along its orbit.

Venus is considered as ‘Earth’s-twin’ because its size and shape are very much similar to that of the earth.

Till recently (August 2006), Pluto was also considered a planet. However, in a meeting of the International Astronomical Union, a decision was taken that Pluto like other celestial objects (Ceres, 2003 UB313) discovered in recent past may be called ‘dwarf planets.

To know more about planets here

https://brainly.com/question/734965

#SPJ4

The one option that specifically connects to an environment is option D: Global warming melting summer ice floes in the Arctic. All of the other alternatives have the potential to harm ecosystems.

The Arctic ecology may be significantly impacted by the melting of summer ice floes as a result of global warming. Many species, including polar bears, seals, walruses, and other bird species, are dependent on the ice for their existence in the Arctic environment since it has been specially adapted to the presence of sea ice.

The habitats and food sources of these animals are disrupted as the ice floes melt. It may result in fewer hunting areas being accessible, change marine animals' reproductive cycles, and have an effect on the entire food chain in the Arctic ecosystem.

To know more about ecosystem :

https://brainly.com/question/31459119

#SPJ1.

Answer:

D. Global warming melting summer ice floes in the arctic

Explanation:

F PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif < f after passing it describes the frequency f PS-10-1-prime.

Hence, Option A is correct.

To know more about railcars here

https://brainly.com/question/14652521

#SPJ4

Acceleration increase down a ramp, due to an object is free to move under the influence of gravity. That's why acceleration increases.

Acceleration is a measure of how quickly an object's velocity changes. On a ramp, an object is free to move under the influence of gravity. The gravitational force acting on an object is always directed downward, and the force of friction acting on an object is directed upward. The force acting on an object moving down a ramp is the force of gravity minus the force of friction. Since the force of gravity is greater than the force of friction, the net force acting on the object is directed downward, which causes the object to accelerate downward. The angle of the ramp affects the force of friction, as the greater the angle of the ramp, the greater the force of friction, and the less the net force acting on the object and less acceleration. Therefore, acceleration increases down a ramp because the net force acting on an object is directed downward and the angle of the ramp affects the force of friction.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

The period of the child's motion is 3.171 seconds. The frequency of the vibration is 0.315 Hz.

The time period is 3.171 seconds.

2 × [tex]\pi[/tex] [tex]\frac{L}{g} ^{\frac{1}{2} }[/tex]

= 3.171 seconds

The frequency is the reciprocal of the time period.

f = 1 ÷ 3.171

= 0.315Hz

Learn more about frequency here:-

https://brainly.com/question/29739263

#SPJ4

Answer: point D

Explanation:

For the circuit shown in the figure, 0.071 A is the current through resistor R1.

What is circuit ?
Circuit is an electrical network consisting of interconnected components that allow electricity to flow through it. It is used to control, regulate, and direct the flow of electricity in order to perform a specific task. A circuit is composed of wires, resistors, transistors, capacitors, and other components which are connected together in order to form a complete system. This system can be used to control a variety of electrical devices, such as lights, motors, and computers. Circuits can be used to create a wide range of applications, from simple household appliances to complex industrial machines.

The current through R1 can be calculated using Ohm's Law:

I = V/R = (9V)/(120Ω) = 0.075 A

Therefore, the answer is A) 0.071 A.

To learn about more circuit

https://brainly.com/question/26064065

#SPJ4

In the above situation the net torque on wire 2 due to wire 1 is Zero.

Fleming's left-hand rule identifies the force's direction on a current-carrying wire when it is placed in a magnetic field. It always runs counter to how the magnetic field and electric current are moving.

Torque is a vector quantity by definition. The direction is determined as part of the torque computation. The direction is parallel to both the force and the radius from the axis. It is customary to choose it along the rotational axis in the right-hand rule direction.

a force that is applied that results in a positive counterclockwise torque A negative torque rotates an object in a clockwise direction.

To know more about torque visit:

https://brainly.com/question/20691242

#SPJ4

Answer:

2.58 m/s

Explanation:

To determine the theoretical speed at which the golf ball must have left the floor, you can use the principle of conservation of energy, which states that the total energy in a closed system remains constant. In this case, we can use the fact that the ball's potential energy changes as it rises and falls.

First, we know that the efficiency of the ball is 61.0%, so we can assume that 39% of the energy is lost as heat, sound, etc. We can calculate the initial kinetic energy (Ei) of the ball as:

Ei = Efficiency * (Initial Potential energy - Final Potential energy)

Ei = 0.61 * (0.444 - 0.271) = 0.119J

Now, we can use this value to calculate the velocity (Vi) of the ball as it left the floor, by using the equation of kinetic energy:

Ei = 0.5 * m * Vi^2

Where:

m = mass of the ball = 0.0453 kg

Vi = velocity of the ball when it left the floor

By substituting the values in the equation we get:

0.119 = 0.5 * 0.0453 * Vi^2

Solving for Vi:

Vi = sqrt(0.119 / (0.5 * 0.0453))

Vi ≈ 2.58 m/s

So, the theoretical speed with which the ball must have left the floor is approximately 2.58 m/s

Keep in mind that this is a theoretical speed and there may be a variance with real-world observations.

Our days would be a little bit shorter, and as a result, the sun would rise and set each day at later and later hours.

Another method to determine how long a day is is to time how long it takes a planet to complete one full spin. A sidereal day is what is being described here. On Earth, a sidereal day is almost exactly 23 hours and 56 minutes long. The sidereal day occurs after every 360-degree rotation of the Earth. It takes 23 hours, 56 minutes to do that. When Earth rotates slightly more and the sun is at the same location in the sky as it was 24 hours earlier, the solar day—the one that people count in the calendar—occurs.

To learn more about Earth refer to:

brainly.com/question/11902321

#SPJ4

Answer:

The intensity of the electric field is

[tex]|E|=10654.37 \:N/C[/tex]

Explanation:

The electric field equation is given by:

[tex]|E|=k\frac{q}{d^{2}}[/tex]

Where:

As we need to find the electric field at the location of the balloon, we just need the charge equal to 1.99*10⁻⁷ C.

Then, let's use the equation written above.

[tex]|E|=(9*10^{9})\frac{1.99*10^{-7}}{0.41^{2}}[/tex]

[tex]|E|=10654.37 \:N/C[/tex]

I hope it helps you!

Answer:

10650

Explanation:

just round that answer to four significant figures and you get that answer

The copper wire a better conductor of electricity than carbon fiber because copper (Cu) is a metal, and only metals can conduct electricity option - B is correct answer.

A metal has greater electrical conductivity the lower its resistivity level. And copper wire is an excellent electrical conductor because it has a low level of resistivity. Incredibly flexible is another quality of copper.

Carbon fiber still does not conduct electricity as well as metal, even after being treated with other materials. Though still about 100 times faster than carbon fiber treated with good electricity conductors, metals like silver, aluminum, and copper are particularly good at conducting electricity.

To know more about copper visit:

https://brainly.com/question/29493129

#SPJ1

Answer:

1. The electrons in copper (Cu) are loosely bound to the nucleus. (C.)

2. An electrical current that flows in one direction (D.)

3. aluminum (Al) (D.)

4. Opposite charges attract one another. (D.)

5. Atoms with a nearly empty valence shell make good conductors. (C.)

Explanation:

I did the Connections Academy test (Conductors and Insulators Quick Check)

The length of time needed to descend back to the earth's surface. Gravitational acceleration is equal to -9.8 m/s2. 2 s^2 s2

When anything is sent vertically upward, it slows down due to gravity. Up until it reaches a maximum height, where the velocity is zero, its speed is decreasing. After that, gravity accelerates it uniformly downward.

The three equations are as follows: v = u + at, v2 = u + 2as, and s = ut + 12at2.

With this knowledge, the vertical velocity formula, vf=vi+gt v f = v I + g t, can be used to calculate the object's terminal velocity. This equation is used by physicists to predict how any object will move on a vertical plane.

To learn more about velocity visit:

brainly.com/question/18084516

#SPJ4

Answer:

34.55 m/s

Explanation:

(A)  in mechanical equilibrium is correct option, as there is no net force acting on it. A non-rotating object that has no acceleration can be said to be in mechanical equilibrium.

Mechanical Balance When all forces acting on an object of interest are equal to zero, mechanical equilibrium has occurred. The balance of all the forces must exist for this to occur.

A reversible reaction is in a stable state called dynamic equilibrium when the rate of the forward reaction equals the rate of the backward reaction. The reaction has come to an end when there is static equilibrium, sometimes referred to as mechanical equilibrium. Or to put it another way, the system is idle.

When an object's acceleration is equal to zero, it is said to be in mechanical equilibrium. The object is either at rest with no change in position over time or it is traveling at a constant pace in this state. The net force acting on the object is equal to zero since the acceleration is zero.

To know more about acceleration visit:

https://brainly.com/question/460763

#SPJ4

Answer:

87.976meters, 43.988 meters, 65.982 meters

Explanation:

Given data

Radius= 14m

Let us find the circumference of the circle

This is equivalent to the total distance covered

C= 2πr

C= 2*3.142*14

C= 87.976 meters

Hence the total distance is

87.976meters

The displacement when she has covered 1/2 the circle is

=87.976/2

=43.988 meters

The displacement when she has covered 3/4 the circle is

=87.976* 3/4

=65.982 meters

Displacement is a vector quantity thus, having different directional component. The component of the given displacement to the north is 98.99 m.

The displacement is the measure of how long and in which direction an object is moved from the starting position. Displacement is a vector quantity thus, characterized by a magnitude and direction.

In physics, displacement is the product of velocity and time. The vertical component of the displacement = d sin θ

horizontal component = d cos θ.

The component to the north for a displacement of 140m with the angle of 45° is = 140 × sin 45 = 98.99 m.

Therefore, the north component of the displacement is about 99 m.

Find more on displacement:

https://brainly.com/question/29307794

#SPJ1