Answer:
Products will be Ga2Br2 and CaS3 (Double Displacement Reaction)
Choose the best answer for this question.
Describe way(s) that your speed could change as you jog along a park's path.
O speed up
all of these, except none of these
O none of these
O slow down
Your speed could change in several ways as you jog along a park's path. Option 2.
Speed of joggingOne possible way is that you could speed up if you increase your pace or start running instead of jogging. This could happen if you feel more energized, motivated, or if you need to catch up with someone.
Conversely, your speed could slow down if you get tired, experience muscle fatigue, or encounter an uphill section of the path that requires more effort. Other factors such as weather conditions, terrain, or distractions can also affect your speed.
Therefore, the correct answer would be "all of these, except none of these," as there are various factors that can cause changes in your jogging speed along a park's path.
More on speed can be found here: https://brainly.com/question/14969657
#SPJ1
ASAP PLEASE!!!3. Reasoning: Explain how the evidence supports your claim. Explain how the
evidence from your data table shows the trends for valence electrons for both
groups and periods on the periodic table. (4 points)
The data table supports the idea that valence electrons affect the chemical characteristics of elements and may be used to forecast chemical reactions by showing how the amount of valence electrons follows different patterns on the periodic table.
How is the number of valence electrons represented in the periodic table?The number of valence electrons in groups 1-2 and 13–18 rises by one from one element to the next throughout each row, or period, of the periodic table.
What are valence electrons and valence valence?The ability of an atom to make covalent bonds with other atoms is known as its "valency." Valence electrons, on the other hand, are the quantity of electrons required in a compound's entire outer shell in order for bonds to form.
To know more about electrons visit:-
https://brainly.com/question/28977387
#SPJ1
What is the molarity of 30.0 mL of hydrochloric acid solution after 15.0 mL of a 3.00 M solution has been diluted?
___ M (Answer Format X.X)
Answer:
To find the molarity of the new solution, we need to use the equation:
M1V1 = M2V2
Where:
M1 = initial molarity = 3.00 M
V1 = initial volume = 15.0 mL
M2 = final molarity (what we're solving for)
V2 = final volume = 30.0 mL
Rearranging the equation to solve for M2:
M2 = (M1V1)/V2
M2 = (3.00 M * 15.0 mL)/30.0 mL
M2 = 1.50 M
Therefore, the molarity of the new solution is 1.50 M.
Answer:
1.00 M
Explanation:
Molarity is defined as the number of moles of solute per liter of solution. When a solution is diluted, the number of moles of solute remains constant, but the volume of the solution increases. Therefore, the molarity of the solution decreases.
In this case, the initial number of moles of solute in the 15.0 mL of 3.00 M hydrochloric acid solution is (15.0 mL) * (3.00 mol/L) * (1 L/1000 mL) = 0.045 mol.
After dilution, the volume of the solution increases to 30.0 mL + 15.0 mL = 45.0 mL. The molarity of the diluted solution is (0.045 mol) / (45.0 mL) * (1000 mL/L) = 1.00 M.
So, the molarity of 30.0 mL of hydrochloric acid solution after 15.0 mL of a 3.00 M solution has been diluted is 1.00 M.
The following chemical reaction takes place in aqueous solution: Fe2(SO4)3 (aq)+ 3K2S(aq) → Fe2S3(s)+ 3K2SO4(aq)
Write the net ionic equation for this reaction.
The net ionic equation for the reaction is:
2Fe3+(aq) + 3S2-(aq) → Fe2S3(s)
What is Ionic Equation?
An ionic equation is a chemical equation that shows the chemical species as their respective ions in a solution. In other words, an ionic equation only includes the ions that participate in the chemical reaction, and excludes any spectator ions that do not participate in the reaction.
The net ionic equation shows only the species that participate in the reaction and omits the spectator ions (ions that appear on both sides of the equation without undergoing a change).
First, let's write the balanced chemical equation for the reaction:
Fe2(SO4)3(aq) + 3K2S(aq) → Fe2S3(s) + 3K2SO4(aq)
To write the net ionic equation, we need to identify the ions that are present in aqueous solution and that participate in the reaction. These are:
Fe2+(aq), SO42-(aq), K+(aq), and S2-(aq)
The balanced ionic equation is:
2Fe3+(aq) + 3SO42-(aq) + 6K+(aq) + 3S2-(aq) → Fe2S3(s) + 3K2SO4(aq)
To obtain the net ionic equation, we eliminate the spectator ions, which are the potassium and sulfate ions that appear on both sides of the equation:
2Fe3+(aq) + 3S2-(aq) → Fe2S3(s)
Learn more about Ionic Equation from given link
https://brainly.com/question/24445340
#SPJ1
Convert the following number
into correct scientific notation.
38.7 x 107
[?]
? ] × 10[?]
X
Enter the coefficient in the green box
and the exponent in the yellow box.
Coefficient
Exponent
Enter
Help Re
The number 38.7 x 10⁷ is already in scientific notation
The coefficient is 38.7 and the exponent is 7.
In the given number, 38.7 x 10⁷, the coefficient is 38.7, which is a decimal number between 1 and 10.
The exponent of 10 is 7, which tells us to move the decimal point seven places to the right to get the actual value of the number.
So, 38.7 x 10⁷ can be expanded as follows:
38.7 x 10⁷= 38.7 000 000
we moved the decimal point seven places to the right and filled the empty spaces with zeros. This gives us the actual value of the number in standard form.
Scientific notation, also referred to as standard form or exponential notation, is a format for succinctly expressing very large or very tiny numbers. It is predicated on the notion that a number can be represented as the result of a coefficient and a multiple of 10.
learn more about scientific notation here
https://brainly.com/question/5756316
#SPJ1
A 100.0 mL sample of 0.10 M NH3 (weak base) is titrated with 0.10 M HNO3 (strong acid). Determine the pH of the solution after the addition of 50.0 mL of HNO3. The Kb of NH3 is 1.8 × 10-5.
To solve this problem, we need to use the concept of weak acid-base equilibrium and the Henderson-Hasselbalch equation. The reaction between NH3 and HNO3 can be written as:
NH3 + HNO3 → NH4+ + NO3-
Before any HNO3 is added, the NH3 solution is a weak base with the following equilibrium equation:
NH3 + H2O ⇌ NH4+ + OH-
where the Kb of NH3 is 1.8 × 10-5. At the start, we have 0.10 M NH3, and the concentration of OH- can be calculated using the Kb expression:
Kb = [NH4+][OH-]/[NH3]
[OH-] = Kb[NH3]/[NH4+] = 1.8 × 10^-5 × 0.10 / x, where x is the concentration of NH4+.
At the equivalence point, the moles of HNO3 added equals the moles of NH3 initially present, and the solution contains only NH4+ and NO3-. Therefore, the concentration of NH4+ is:
x = 0.10 - 0.05 = 0.05 M
At this point, all the OH- ions have been consumed by the HNO3, so the pH of the solution depends on the concentration of NH4+. The Henderson-Hasselbalch equation for a weak acid-base system is:
pH = pKa + log([base]/[acid])
where pKa is the negative logarithm of the acid dissociation constant (Ka) and [base]/[acid] is the ratio of the concentrations of the weak base and its conjugate acid.
For NH3, the conjugate acid is NH4+ and the pKa can be calculated as:
pKa = -log(Ka) = -log(1.8 × 10^-5) = 4.74
Plugging in the values, we get:
pH = 4.74 + log(0.05/0.05) = 4.74
Therefore, the pH of the solution after the addition of 50.0 mL of HNO3 is 4.74.
Calculate the change in energy using bond energies for the following reaction. Explain if the reaction is endothermic or exothermic. Check the bond energy chart for reference
The bond energy is -183 kJ/ mol for the given reaction and bond energies for the reaction. The reaction is exothermic.
What is bond energy ?Atoms bond together to create compounds because doing so allows them to achieve lower energies than they would have as individual atoms. A quantity of energy equivalent to the difference between the energies of the bonded and separated atoms is released, typically as heat. That is, linked atoms have less energy than individual atoms. Energy is always released when atoms combine to form a compound, and the compound has a reduced overall energy.
When a chemical reaction happens, molecular bonds are broken and new bonds are formed, resulting in the formation of new molecules.
Change is energy(ΔE) = ΣΔBE (Products) - ΣΔBE (Reactant)
ΔE = (432+ 239) - 2×427
ΔE = -183 kJ/ mol
Therefore it is exothermic reaction.
To know more about bond energy , visit ;
brainly.com/question/26141360
#SPJ1
Explain the difference between an open and closed system in terms of matter and energy.
Explanation:
The stovetop example would be an open system, because heat and water vapor can be lost to the air. A closed system, on the other hand, can exchange only energy with its surroundings, not matter.
How many mL of a 2.0M solution of KNO would you need to prepare 100.0 mL of a 0.15M solution?
We would need to measure 7.5 mL of the 2.0M solution of KNO₃ and then add enough solvent to get the total volume up to 100.0 mL.
What is volume?Volume is a unit used to describe how much three-dimensional space an object or substance occupies. By multiplying the length, breadth, and height of an object or substance, as well as additional mathematical formulas tailored to the shape of the object or substance, one can determine the volume of the thing or substance.
How do you determine it?We can use the following formula to create a solution:
M1V1 = M2V2
where M1 denotes the starting concentration, V1 the starting volume, M2 the ending concentration, and V2 the ending volume.
In this instance, we want to make a 100.0 mL 0.15M KNO₃ solution using a 2.0M KNO₃ solution.
When these values are added to the formula, we obtain:
(2.0 M) V1 = (0.15 M) (100.0 mL)
When we solve for V1, we get:
V1 = (0.15 M) (100.0 mL) / (2.0 M) (2.0 M)
V1 = 7.5 mL
So, to prepare 100.0 mL of a 0.15M solution of KNO₃, we would need to measure 7.5 mL of the 2.0M solution of KNO₃ and then add enough solvent to get the total volume up to 100.0 mL.
To know more about volume, visit:
brainly.com/question/25252629
#SPJ1
Calculate the number of atoms in a 7.08 x 103 g sample of aluminum.
Answer:
There are 4.59×1024 4.59 × 10 24 atoms of Al in 7.63 moles of Al.
31.40cm³ of 0.15moldm^-3 hydrochloric acid, HCl, is neutralised by 20.0cm³ of potassium hydroxide solution, KOH. Calculate molarity of potassium hydroxide.
The molarity of potassium hydroxide is 1 mol/dm³.
What is molarity?Molarity is a measure of concentration, expressing the number of moles of a solute per litre of solution. It is denoted by the symbol M and is an important concept in chemistry, especially when dealing with solutions. Molarity is related to the molar mass of the solute and the density of the solution. It is a useful tool for measuring the amount of a particular solute in a given solution.
To calculate the molarity of potassium hydroxide, we must first calculate the moles of HCl and KOH.
First, we calculate the moles of HCl. We use the formula moles = concentration x volume.
HCl: 0.15 moldm³ x (31.40/1000) = 0.00471 moles
Next, we calculate the moles of KOH.
KOH: (20/1000) = 0.02 moles
Now we can calculate the molarity of KOH. We use the formula molarity = moles/volume.
KOH: 0.02/0.02 = 1 mol/dm³
Therefore, the molarity of potassium hydroxide is 1 mol/dm³.
To know more about molarity click-
https://brainly.com/question/30404105
#SPJ1
**DUE TOMORROW NEED ANSWER ASAP**
If the entire mass of the Milky Way was due to gas and stars, how would you expect the rotational speed of a star near the edge of the galaxy to compare to the rotational speed of a star near the center?
Answer:
We would expect stars near the edge of the galaxy to rotate slower than stars near the center. This is because the rotational speed of objects in a rotating system depends on their distance from the center of rotation. Stars near the center of the galaxy are closer to the gravitational center of the galaxy's mass, so they feel a stronger gravitational pull and rotate faster. Stars near the edge are farther from the center, so they feel a weaker gravitational pull and rotate slower. This results in a gradient of rotational speeds, with the fastest speeds near the galactic center and slower speeds near the edges.
Need help with problem
The number of moles of CO contained in the 20.0 L tank at 93 °C and 4.52 atm is 3.01 moles
How do i determine the number of mole contained in the tank?Ideal gas equation is given as follow:
PV = nRT
Where
P is the pressureV is the volumen is the number of moleR is the gas constantT is the temperatureWith the above formula, we can obtain the number of mole of CO in the tank. This is shown below:
Volume (V) = 20.0 L Temperature of gas (T) = = 93 °C = 93 + 273 = 366 KPressure of gas (P) = 4.52 atmGas constant (R) = 0.0821 atm.L/molKNumber of mole of CO (n) =?PV = nRT
4.52 × 20 = n × 0.0821 × 366
Divide both sides by (0.0821 × 366)
n = (4.52 × 20) / (0.0821 × 366)
n = 3.01 moles
Thus, we can conclude that the number of mole of the gas is 3.01 moles. The correct answer is the 3rd option
Learn more about number of mole:
https://brainly.com/question/29927685
#SPJ1
Determine how many liters of carbon monoxide are produced from 0.465 g antimony trioxide
The balanced chemical equation for the reaction between antimony trioxide (Sb2O3) and carbon monoxide (CO) is:
Sb2O3 + 3CO → 2Sb + 3CO2
From the equation, we can see that 1 mole of Sb2O3 reacts with 3 moles of CO to produce 3 moles of CO2. The molar mass of Sb2O3 is 291.52 g/mol, so 0.465 g of Sb2O3 is equal to 0.465 g / 291.52 g/mol = 0.001592 mol.
Since 1 mole of Sb2O3 reacts with 3 moles of CO, we need 3 * 0.001592 = 0.004776 mol of CO to react completely with 0.465 g of Sb2O3.
The molar mass of CO is 28.01 g/mol, so 0.004776 mol of CO is equal to 0.004776 mol * 28.01 g/mol = 0.1338 g of CO.
Therefore, 0.465 g of Sb2O3 will produce 0.1338 g of CO. To convert this to liters of CO at a given temperature and pressure, we would need to know the volume of 0.1338 g of CO under those conditions using the ideal gas law.
hope this helped (:
Predicting Products: Iron II Nitrate + Copper I Carbonate
The products of the reaction are iron (II) carbonate and copper (II) nitrate.
[tex]Fe(NO_3)_2 + Cu_2CO_3 - > FeCO_3 + 2Cu(NO_3)_2[/tex]
An inorganic substance with the molecular formula Fe(NO₃)₂ is iron (II) nitrate. It is a crystalline green substance that can be dissolved in water. Iron or iron oxide can be used to combine with nitric acid to create iron (II) nitrate, which is a salt of both iron and nitric acid.
It is frequently used as an iron supply in chemical processes as well as a starting point for the creation of other iron compounds. Additionally, the creation of pigments, dyes, and catalysts can be accomplished using iron (II) nitrate.
However, it needs to be handled carefully because it is a potent oxidizer and, if not treated correctly, can irritate the skin and eyes.
learn more about Iron II Nitrate here
https://brainly.com/question/2957276
#SPJ1
What is the volume of a balloon if it contains 3.2 moles of helium at a temperature of 20 C and standard pressure
To solve this problem, the ideal gas law equation can be used. The volume of the balloon will come to 79.9 liters.
What is the ideal gas law?The ideal gas law is a fundamental equation in physics and chemistry that describes the behavior of ideal gases under various conditions. The law is expressed mathematically as:
PV = nRT
where P is the pressure of the gas, V is the volume it occupies, n is the number of moles of gas, T is the temperature of the gas in Kelvin, and R is the universal gas constant.
First, we need to convert the temperature from Celsius to Kelvin:
T = 20°C + 273.15 = 293.15 K
Next, we need to find the value of R, which is 0.0821 L·atm/mol·K for ideal gases.
We also know that the pressure is standard pressure, which is 1 atm.
Plugging in all the values, we get:
V = (nRT) / P
V = (3.2 mol * 0.0821 L·atm/mol·K * 293.15 K) / 1 atm
V = 79.9 L
Therefore, the volume of the balloon is 79.9 liters.
Learn more about the ideal gas law here:
https://brainly.com/question/28257995
#SPJ1
What is the pH of an aqueous solution with a hydrogen ion concentration of [H+]=3.1×10−9 M?
the pH of the aqueous solution is 8.51 with a hydrogen ion concentration of [H+]=3.1×[tex]10^-9[/tex]M
The pH of the aqueous solution can be calculated using the formula:
pH = -log[H+]
where [H+] is the hydrogen ion concentration of the solution.
Substituting the given value, we get:
pH = -log(3.1×[tex]10^-9[/tex])
pH = 8.51
An aqueous solution is one in which water serves as the solvent. It is utilised in a variety of applications, including analytical chemistry, biochemistry, and industrial chemistry. It is the most prevalent kind of solution used in chemical reactions. Water serves as both the solvent and the solute in an aqueous solution, where the solute is often a solid, liquid, or gas. Due to its high polarity and capacity to make hydrogen bonds with other molecules, water is an excellent solvent that can dissolve a variety of materials, including polar molecules and ionic compounds. Acid-base reactions, redox reactions, and precipitation reactions are just a few of the numerous chemical processes that take place in aqueous solutions. A variety of variables can have an impact on an aqueous solution's characteristics.
Learn more about aqueous solution here:
https://brainly.com/question/26856926
#SPJ1
How many liters of oxygen are needed to exactly react with 17.5 g of methane, CH4, at
STP? (Hint: you must calculate the number of moles of CH4 and look at the reaction
stoichiometry first)
CH4(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(l)
How many grams of lithium nitrate will be needed to make 230 grams of lithium sulfate,
assuming that you have an adequate amount of lead (IV) sulfate to complete the reaction?
The amount of lithium nitrate needed to make 230 grams of lithium sulfate depends on the amount of lead (IV) sulfate provided and is equal to half of the moles of lithium sulfate produced, which is 2.091/2 = 1.046 mol. The mass of lithium nitrate required can be calculated using its molar mass.
To calculate the amount of lithium nitrate required to make 230 grams of lithium sulfate, we can use the following steps:
Calculate the molar mass of lithium sulfate:
Li2SO4: 2(6.94 g/mol) + 1(32.06 g/mol) + 4(16.00 g/mol) = 109.94 g/mol
Determine the number of moles of lithium sulfate:
n = m/M = 230 g / 109.94 g/mol = 2.091 mol
Since 2 moles of lithium sulfate are produced for every 1 mole of lead (IV) sulfate, we need 2.091/2 = 1.046 mol of lead (IV) sulfate to react with the lithium sulfate.
Calculate the mass of lead (IV) sulfate required:
m = nM = 1.046 mol x Pb(SO4)2 molar mass (assuming it's provided)
From the balanced equation, we know that for every 2 moles of lithium sulfate, we need 1 mole of lithium nitrate.
The amount of lithium nitrate needed to make 230 grams of lithium sulfate depends on the amount of lead (IV) sulfate provided and is equal to half of the moles of lithium sulfate produced, which is 2.091/2 = 1.046 mol. The mass of lithium nitrate required can be calculated using its molar mass.
learn more about lithium nitrate here
https://brainly.com/question/11512972
#SPJ1
Round your answer to the nearest hundredth.
A right triangle A B C. Angle A C B is a right angle. Angle A B C is seventy degrees. Side B C is unknown. Side A B is five units.
The length of side BC is approximately 1.82 units.
Steps
To find the length of side BC, we can use trigonometry. Since we know two angles of the triangle, we can use the fact that the sum of the angles in a triangle is 180 degrees to find the measure of angle ABC:
Angle ABC = 180 - 90 - 70 = 20 degrees
We can now use the trigonometric function tangent to find the length of BC:
tan(20) = BC/5
Solving for BC, we get:
BC = 5*tan(20) ≈ 1.82 units
The length of side BC is approximately 1.82 units.
The connections between the sides and angles of triangles are the subject of the mathematical discipline of trigonometry. It is helpful in several disciplines, including navigation, physics, engineering, and building.
Sine, cosine, and tangent are the three fundamental trigonometric functions that link the ratios of the lengths of the sides of a right triangle to the angles opposite those sides.
The ratio of the length of the side opposing the angle to the length of the hypotenuse is known as the sine of an angle. (the longest side of the right triangle).
The proportion of the neighboring side's length to the hypotenuse's length is known as the cosine of an angle.
learn more about the right triangle here
https://brainly.com/question/2217700
#SPJ1
Formation of the Solar System Lab Report
Instructions: In this virtual lab, you will investigate the law of universal gravitation by
manipulating the size of the ster and the positions of planets within Solar System X. Record your
hypothesis and results in the lab report below. You will submit your completed report.
Name and Tide:
Include your name, instructor's name, date, and name of lab
Awi Ulivar, Mrs. Harmon, 3/30/21, Formation of the solar system lab report
Objectives():
is your own words, what is the purpose of this lab?
Hypothesia:
In this section, please inchade the if the statements you developed during your lab activity
These statements reflect your predicted outcomes for the experiment.
If the mass of the sun is Is at least
If the mass of the sun is 2x, at least one planet will fall into the habitable rone if I place a planet
and all planets will orbit the sun successfully.
arbits
If the
e planet will fall into the habitable zone if I place a planet
and all planets will orbit the sun successfully.
the sun i
at least one planci will fall into the habitable zone if I place a plant
and all planets will orbit the sun successfully.
Procedure:
The materials and procedures are listed in your virtual lah. You do not need to repeat them here.
However, you should note if you experienced any errors or other factors that might affect your
Using the summary quvons at the end of your virtual lab activity, please clearly define the
dependent and independent variables of the experiment
Data:
Record your observation statements from Space Academy.
When the mass of the sun is larger, Farth moves around the sun at a
pace.
When the mass of the sun is smaller, Farth moves around the sun at a
pace.
When Farth is closer to the sun, its orbit becomes
When Farth is farther from the sun, its orbit becomes
Example:
'smas I
MAT'S THIS
I Trial One
MAT'S HILL
1-Tial Two
For each trial, record the orbit manber of each planet from the sun. Be sure to indicate the
amber of planets in the habitable zone after each trial. Create a different configuration of
planets for each trial. An example has been supplied for you.
MAY
2x-Trial One
way's mass
2- Tial Two
mask
34-Trial One
WAY's mass
J-Tial Two
Orbit
Number
Planet One
Orbit
Number
Planet
Two
(faster, slower)
3
(faster, slower)
(faster, slower)
(faster, slower)
Orbit
Orbit
Number Number
Planet Planet
Three
Four
Number of Number of
planets in planets left
the
habitable
PODE
successful
orbit
Conclusion:
Your conclusion will include a ummary of the lab results and an interpretation of the results
Please awwer all questions in complete sentences using your own work
1. Using two to three sentences, semmarize what you investigated and observed in this lab
2. You completed three terra forming trials. Describe the how the sun's mass affects planets
in a solar system, Use data you receeded to support your conclusions
3. In this simulation the masses of the planets were all the same do you think of the masses of the planets were different it would affect the results why or why not?
4. How does this simulation demonstrate the law of universal gravitation
5. It is year 2085 and the world population has grown at an alarming rate as a space explorer you have been sent on a terraforming mission into space your mission to search for a habitable planet for humans to colonize in addition to planet earth you found a planet you believe would be habitable and now need to report beach your findings describe the new planet and why it would be perfect for maintaining human life.
According to the stimulation, if the bulk of the plants is the same, there will be no change.
What makes planet masses different?Planets have varying masses because they are formed of diverse materials, and their mass dictates their thickness and thinness.
The weight of an item is determined by its mass and the strength with which gravity pulls on it. The strength of gravity is proportional to the distance between two objects. As a result, the same thing weights differently on various planets.
The mass indicates the influence of gravity as well as the density of the atmosphere. If the masses are the same, all planets will be the same size, and many will be incapable of supporting life.
Find out more information about the simulation.
brainly.com/question/25896797.
#SPJ1
Use Equations a and b to determine AH for the following reaction.
2CO(g) + 2NO(g) → 2CO₂(g) + N₂(g) AH = ?
a. 2CO(g) + O₂(g) → 2CO₂(g) AH = -566.0 kJ
b. N₂(g) + O₂(g) → 2NO(g) AH = -180.6 kJ
The ΔH for the given reaction is +204.8 kJ. This indicates that the reaction is endothermic, which absorbs heat from the surroundings.
To determine the AH for the given reaction, we can use the following steps:
Step 1:Write the balanced chemical equation for the reaction.
2CO(g) + 2NO(g) ⇒ 2CO₂(g) + N₂(g)
Step 2:Use the given equations to write the overall reaction as a combination of the given reactions. We can do this by reversing equation (a) and multiplying equation (b) by 2 so that the reactants and products match the overall reaction.
2CO₂(g) ⇒ 2CO(g) + O₂(g) ΔH = +566.0 kJ (reversed)
2N₂(g) + 2O₂(g) ⇒ 4NO(g) ΔH = -2(180.6 kJ) = -361.2 kJ (multiplied by 2)
Overall reaction:
2CO(g) + 2NO(g) ⇒ 2CO₂(g) + N₂(g) ΔH = ?
Step 3: Add the ΔH values for the individual reactions to obtain the ΔH for the overall reaction.
ΔH = (+566.0 kJ) + (-361.2 kJ) = +204.8 kJ
Therefore, the ΔH for the given reaction is +204.8 kJ. This indicates that the reaction is endothermic, meaning that it absorbs heat from the surroundings., meaning that it absorbs heat from the surroundings.
To know more about endothermic, visit:
https://brainly.com/question/31214950
#SPJ1
Identify the system and surroundings!! And c, d, and e
The candle and the wax represent the structure. Everything that is not a part of the flame or the wax, such as the air, items in the room, and anything else, is considered to be the surroundings. As the liquid wax solidifies, heat is transferred from the wax to the environment.
What kind of response occurs when candle wax melts?Wax fire causes a chemical change while wax melting causes a physical change: Wax changes from a solid to a liquid on its own when it melts. Only the physical state of a substance alters in the described procedure.
When candle wax melts, where does it go?The New York Times claims that the majority of a candle's material truly evaporates into the air. Actually, the wax rises as it begins to melt and pool around the cotton flame of the candle.
To know more about liquid wax visit:-
https://brainly.com/question/26305599
#SPJ9
How many percent by mass of mercury are there in a sample of tap water with a mass of 750 g containing 2.2g of Hg?
Answer:
Divide the mass of the water lost by the mass of hydrate and multiply by 100. The theoretical (actual) percent hydration (percent water) can be calculated from the formula of the hydrate by dividing the mass of water in one mole of the hydrate by the molar mass of the hydrate and multiplying by 100.
How are hybrid and electric cars related to air pollution
What are the basic laboratory techniques or operations that are used in separating components of mixtures and explain why?
The basic laboratory techniques that are used for separating components of the mixture are:-
Distillation- This technique is used to separate the component from the mixture by heating the mixture and vaporising the element from the mix then condensing and storing them separately.Filtration- This technique is used in the laboratory to separate the element from the mixture with the help of filter paper. It is mainly used to separate impurities from the given liquid.Extraction- This technique is used to separate the element from the mixture with the help of a solvent that dissolves with the mixture and then separates the desired compound. Recrystallization- This technique is used for the separation of an element with help of a solvent that crystalizes the element from the mixture. This technique is mainly used to separate a solid from a mixture.To know more about The Separation of a mixture:
https://brainly.com/question/28689284
Formic acid has a Ka of 1.77 * 10 - 4. To 55.0 mL of 0.25 M solution 75.0 mL of 0.12 M NaOH is added. What is the resulting pH .
Explanation:
Formic acid (HCOOH) reacts with sodium hydroxide (NaOH) to form sodium formate (HCOONa) and water. The balanced chemical equation is:
HCOOH + NaOH → HCOONa + H2O
The reaction is a strong acid-strong base titration. We can use the following equation to calculate the concentration of formate ion (HCOO^-) in the resulting solution:
[HCOO^-] = [OH^-] - [HCOOH]
where [OH^-] is the concentration of hydroxide ion and [HCOOH] is the concentration of formic acid before the reaction.
Before the reaction, the solution contains 0.25 mol/L of formic acid in 55.0 mL, or 0.25 mol/L × 0.055 L = 0.01375 mol of formic acid. The solution also contains 0.12 mol/L of sodium hydroxide in 75.0 mL, or 0.12 mol/L × 0.075 L = 0.009 mol of sodium hydroxide.
Since the reaction between formic acid and sodium hydroxide is a 1:1 reaction, all the 0.009 mol of sodium hydroxide will react with 0.009 mol of formic acid, leaving 0.00475 mol of formic acid unreacted.
[HCOO^-] = [OH^-] - [HCOOH]
[OH^-] = [NaOH] = 0.12 mol/L × 0.075 L / 0.13 L = 0.0692 mol/L
[HCOO^-] = 0.0692 mol/L - 0.00475 mol/L = 0.0645 mol/L
Now we can calculate the pH of the resulting solution using the Ka expression for formic acid:
Ka = [HCOO^-][H3O^+]/[HCOOH]
[H3O^+] = Ka × [HCOOH] / [HCOO^-]
[H3O^+] = 1.77 × 10^-4 × 0.00475 mol/L / 0.0645 mol/L
[H3O^+] = 1.29 × 10^-5 mol/L
pH = -log[H3O^+]
pH = -log(1.29 × 10^-5)
pH = 4.89
Therefore, the resulting pH is 4.89.
Keq= 798 for the reaction:
2SO2 (g) + O2 (g) ⇌ 2SO3 (g)
In a particular mixture at equilibrium, [SO2]= 4.20 M and [SO3]=11.0 M.
Calculate the equilibrium concentration of O2 ([O2]) this mixture.
It's easy
Explanation:
We can use the equilibrium constant expression to calculate the equilibrium concentration of O2:
Kc = [SO3]^2 / ([SO2]^2 [O2])
At equilibrium, the value of Kc is constant, so we can use the equilibrium concentrations of SO2 and SO3 to solve for [O2]:
Kc = [SO3]^2 / ([SO2]^2 [O2])
Kc = (11.0 M)^2 / ((4.20 M)^2 [O2])
Simplifying:
[O2] = (11.0 M)^2 / (Kc (4.20 M)^2)
The value of Kc for this reaction is 4.67 × 10^1, as determined by experiment.
[O2] = (11.0 M)^2 / (4.67 × 10^1 (4.20 M)^2)
[O2] = 0.153 M
Therefore, the equilibrium concentration of O2 in this mixture is 0.153 M.
How many ions are formed during the dissociation of 500 molecules of carbonic acid, if it dissociates in the first degree by 20%, and in the second degree by 1%? Explain your answer.
The dissociation of 500 molecules of carbonic acid would produce 200 + 15 = 215 ions.
What is Dissociation?
Dissociation is a chemical process in which a compound breaks down into two or more simpler components, usually ions, when it is exposed to a suitable solvent or energy source such as heat or light. In other words, it is the separation of a molecule or compound into smaller particles such as atoms, ions, or radicals.
The dissociation of carbonic acid (H2CO3) in the first degree produces two ions (H+ and HCO3-) per molecule, while the dissociation in the second degree produces three ions (H+, CO32-, and HCO3-) per molecule.
If 500 molecules of carbonic acid dissociate in the first degree by 20%, then 20% of the molecules (0.2 x 500 = 100) will dissociate, producing 100 x 2 = 200 ions (H+ and HCO3-).
If 500 molecules of carbonic acid dissociate in the second degree by 1%, then 1% of the molecules (0.01 x 500 = 5) will dissociate, producing 5 x 3 = 15 ions (H+, CO32-, and HCO3-).
Learn more about Dissociation from the given link
https://brainly.com/question/16818822
#SPJ1
Must be Correct 50 POINTS
The chemical formula for the product.
(a)Orbital diagram for Li:
1s² 2s¹
Orbital diagram for S:
1s² 2s² 2p⁶ 3s² 3p⁴
Lewis structure for Li:
Li: [Li]+
Lewis structure for S:
:S:::S:
Combination of Li and S:
Li₂S
(b)
Orbital diagram for Ca:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s²
Orbital diagram for Cl:
1s² 2s² 2p⁶ 3s² 3p⁵
Lewis structure for Ca:
Ca: [Ca]²⁺
Lewis structure for Cl:
:Cl:
Combination of Ca and Cl:
CaCl₂
(c)
Orbital diagram for K:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹
Orbital diagram for Cl:
1s² 2s² 2p⁶ 3s² 3p⁵
Lewis structure for K:
K: [K]+
Lewis structure for Cl:
:Cl:
Combination of K and Cl:
KCl
(d) Orbital diagram for Na:
1s² 2s² 2p⁶ 3s¹
Orbital diagram for N:
1s² 2s² 2p³
Lewis structure for Na:
Na: [Na]+
Lewis structure for N:
:N:::N:
Combination of Na and N:
Na₃N
An orbital diagram is a visual depiction of the electrons located in an atom's or molecule's orbitals. Each electron is represented by an arrow, while each orbital is illustrated by a line.
The two electrons in each orbital's two lines are drawn in pairs to represent their opposing spins. Lewis structures, on the other hand, are schematics that display the interactions between the atoms in a molecule as well as any potential lone pairs of electrons.
Each atom's valence electrons are shown as dots, and the connections between atoms are shown as lines. The kind of bond that can be created between two elements depends on the number of valence electrons.
learn more about valence electrons here
https://brainly.com/question/371590
#SPJ1