Question 1
A) Which sentence about galaxies provides evidence of universe expansion that supports the Big Bang Theory?(1 point)

Galaxies are moving away from each other.


Galaxies are in constant motion.


Galaxies are moving at different speeds and in different directions.


Galaxies are moving more slowly than they have in the past.


Question 2
A) Which provides evidence of universe expansion that supports the Big Bang Theory? Select the three correct answers.(2 points)

The temperature of the universe is increasing.


An enormous amount of weak background radiation has been detected in the universe.


The temperature of Cosmic Microwave Background radiation varies widely from one part of the universe to another.


Galaxies are moving away from each other.


The temperature of the universe is decreasing.


The universe is undergoing a cycle of contraction and expansion.


Question 3
A) Which is evidence of universe expansion that supports the Big Bang Theory?(1 point)

The temperature of the universe has cooled and warmed repeatedly over time.


The temperature of the universe has warmed over time.


The temperature of the universe is the same as it was at the time of the Big Bang.


The temperature of the universe has cooled over time.

Answer:

Hope It Help

Explanation:

That's all I know

Answer:

protons

Explanation:

Answer:

C. Solids,Liquids, Gases

Answer:

the answer here would be A

The statement that best explains the difference between longitudinal and transverse waves is D: Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave. The correct option is D.

A wave is a disturbance that propagates through space and time, transferring energy without transferring matter. Waves can be found in various forms, such as sound waves, light waves, and water waves.

A transverse wave is a type of wave where the particles of the medium vibrate perpendicular to the direction of wave propagation.

In other words, the motion of the particles is at right angles to the direction of the energy transfer. A common example of transverse waves is light waves.

A longitudinal wave is a type of wave where the particles of the medium vibrate parallel to the direction of wave propagation. The motion of the particles is in the same direction as the energy transfer. An example of longitudinal waves is sound waves.

In a longitudinal wave, particles in the medium oscillate back and forth along the direction of the wave, creating areas of compression and rarefaction. In a transverse wave, particles in the medium oscillate up and down, creating crests and troughs.

Therefore, the correct statement is Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave(D).

To know more about the amplitude of a wave click:

https://brainly.com/question/29775285

#SPJ3

Answer:

[tex]\color{Blue}\huge\boxed{Answer} [/tex]

Answer:

[tex]P_{sp}=178.4W/kg[/tex]

Explanation:

From the question we are told that:

Mass of fish [tex]m_f=650kg[/tex]

Cross-sectional area [tex]A=0.92 m^2[/tex]

Drag coefficient of [tex]\mu= 0.0091[/tex]

Seawater  density [tex]\rho= 1026 kg/m^3.[/tex]

Speed of  Fish [tex]v=30 m/s[/tex]  

Generally the equation for Drag force F_d is mathematically given by

[tex]F_d = \mu * \rho *A v^2 /2[/tex]

[tex]F_d = 0.0091* 0.92* 1026* 30^2/2 \\F_d= 3865. 35 N[/tex]  

Generally the equation for high speed  Power  [tex]P_{sp}[/tex] is mathematically given by

[tex]P_{sp}=3865*35*\frac{v}{m_f}[/tex]

[tex]P_{sp}=F_d*35*\frac{30}{650}[/tex]

[tex]P_{sp}=178.4W/kg[/tex]

Answer:

the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron

Explanation:

This question is in the model of the photoelectric effect, where some electrons are expelled from the metal by the action of a ray of light.

This effect was explained by Einstein supposes that the light rays are formed by photons and the energy of these photons is given by the Planco relation

           K = h f - Ф

where K is the kinetic energy of the ejected electrons and Ф is the work function, it keeps the electrons inside the material.

When analyzing this expression there is a minimum frequency (threshold) for which K = 0

           hf = Ф

Below this frequency the photons in the light beam do not have the energy to expel the electrons from the material.

Let's examine the answers

a) True. You agree with the above

b) False. The analysis is in terms of individual shock

c) False. The expulsion does not have to do with the number of photons but with the energy of each one

therefore the only correct answer is: Photons of lower-frequency light don't have enough energy to eject an electron

b.gravity have a great day:)

The resistance force which is the type of force that oppose the motion when we walk on an inclined plane is mgcos (-).

A Resistance force is defined as a force that acts to oppose the motion or motion of an object that is an opposing force. Resistance force opposes the moving body to move in the opposite direction. Resistive force is described as the force, or the vector sum of several forces where the direction is opposite to the motion of a body is also called friction during sliding and/or rolling.

Some examples of resistive force are friction, where an object is held back from sliding on a surface, while another form of resistive force is fluid resistance in which the object is trying to plow through a fluid material.

Thus, the resistance force which is the type of force that oppose the motion when we walk on an inclined plane is mgcos (-).

Learn more about Resistance force, here:

https://brainly.com/question/2285158

#SPJ6

Answer:

the deeper into the ocean you go, the more pressure is exerted on you

Explanation:

Answer:

The correct solution is "1230 K".

Explanation:

The given values are:

[tex](V_{rms})_1= 200 \ m/sec[/tex]

[tex](V_{rms})_2= 350 \ m/sec[/tex]

[tex]T_1=400 \ K[/tex]

As we know,

⇒  [tex]V_{rms} \propto \sqrt{T}[/tex]

or,

⇒  [tex]\frac{(V_{rms})_1}{(V_{rms})_2} =\sqrt{\frac{T_1}{T_2} }[/tex]

On substituting the values, we get

⇒  [tex]\frac{200}{350} =\sqrt{\frac{400}{T_2} }[/tex]

⇒   [tex]T_2=1230 \ K[/tex]

Answer:

All the elements except for the ones on the last column (at the left of the periodic table)

Explanation:

Answer:

I = 5000 A

Explanation:

We will use Ampere's Law to calculate the current:

[tex]B = \frac{\mu I}{2\pi r}\\\\[/tex]

where,

B = Magnetic Field Strength = 0.1 mT = 1 x 10⁻⁴ T

μ = Permeability of Free Space = 4π x 10⁻⁷ N/A²

I = Current = ?

r = radius = 10 m

Therefore,

[tex]1\ x\ 10^{-4}\ T = \frac{(4\pi\ x\ 10^{-7}\ N/A^2)(I)}{2\pi(10\ m)}\\\\I = \frac{(1\ x\ 10^{-4}\ T)(2\pi (10\ m))}{4\pi\ x\ 10^{-7}\ N/A^2}[/tex]

I = 5000 A

Answer:

Hormones

Explanation:

The glands that make up the endocrine system produce chemical messengers called hormones that travel through the blood to other parts of the body. Important endocrine glands include the pituitary, thyroid, parathyroid, thymus, and adrenal glands

Answer:

The forward motion of a body in space, such as a planet or moon, and the pull of gravity on it from another body in space.

Explanation:

Earth and many other bodies—including asteroids, comets, and the other planets—move around the sun in curved paths called orbits. Generally, the orbits are elliptical, or oval, in shape. Because of the sun’s relatively strong gravity, Earth and the other bodies constantly fall toward the sun, but they stay far enough away from the sun because of their forward velocity to fall around the sun instead of into it. As a result, they keep orbiting the sun and never crash to its surface. The motion of Earth and the other bodies around the sun is called orbital motion. Orbital motion occurs whenever an object is moving forward and at the same time is pulled by gravity toward another object.

Answer:

Tactical movement

Explanation:

Speed and time play a significant factor in Tactical movement. The correct option is B.

Tactical movement refers to the coordinated and strategic movement of military units or teams to achieve a specific objective. It is a fundamental aspect of military operations and involves the use of various tactics and techniques to move troops and equipment safely and efficiently on the battlefield.

Tactical movement can involve various modes of transportation, such as on foot, in vehicles, or by air. It also involves the use of cover and concealment to avoid detection by the enemy, and the use of communication and signal systems to coordinate movements and maintain situational awareness.

The success of the tactical movement depends on many factors, including the terrain and weather conditions, the size and composition of the units involved, the available resources and equipment, and the tactics and strategies employed by both friendly and enemy forces. It requires careful planning, training, and execution to ensure that the movement is successful and achieves the desired outcome.So, tactical movement is an essential component of military operations, and plays a critical role in achieving victory on the battlefield.

Here in the Question,

Tactical movement refers to the movement of military units or teams in a coordinated and strategic manner to achieve a specific objective. In such movements, speed and time are critical factors because they determine the success or failure of the mission. The speed of movement can help to surprise the enemy, take advantage of a weakness in their defense, or seize a key position before they can respond. Time is also important because the longer it takes to achieve the objective, the more likely the enemy is to detect and counter the movement. Therefore, tactical movement requires careful planning and execution to ensure that the right units move at the right speed and at the right time to achieve the desired outcome.

Therefore, the correct option is B i.e Tactical movement.

To learn about Kinetic energy click:

https://brainly.com/question/26472013

#SPJ2

Answer:

7

Explanation:

The light travels a total of 4 cm to the screen, of that, 3 cm is in air and 1 cm is in the glass plate.

The total number of wavelengths of light between the source and screen is just the number of wavelengths in air plus the number in the glass.

To determine the number of wavelengths in air, divide the thickness of air (3 cm) by the wavelength of the light (6000 Angstroms), converting units as needed.

The refractive index of the glass is 1.5. That means that the velocity of propagation of the light in the glass is 2/3 of what it is in air, and so the wavelength of the light in glass is 2/3 of what it is in air. So, divide the thickness of glass (1 cm) by the wavelength of the light in glass (6000 * 2/3).

Add the two values for the final answer

Answer:

A. The angular acceleration of the disk is -1.047 radians per square second.

B. The disk turns 4.715 radians while stopping.

C. The disk did 0.750 revolutions while stopping.

Explanation:

A. In this case, the disk is deceleration at a constant rate. Hence, the angular acceleration experimented by the object ([tex]\alpha[/tex]), in radians per square second, can be found by means of this kinematic expression:

[tex]\alpha = \frac{\omega-\omega_{o}}{t}[/tex] (1)

Where:

[tex]\omega_{o}[/tex] - Initial angular speed, in radians per second.

[tex]\omega[/tex] - Final angular speed, in radians per second.

[tex]t[/tex] - Time, in seconds.

If we know that [tex]\omega_{o} \approx 3.142\,\frac{rad}{s}[/tex], [tex]\omega = 0\,\frac{rad}{s}[/tex] and [tex]t = 3\,s[/tex], then the angular acceleration of the disk is:

[tex]\alpha = \frac{\omega-\omega_{o}}{t}[/tex]

[tex]\alpha = -1.047\,\frac{rad}{s^{2}}[/tex]

The angular acceleration of the disk is -1.047 radians per square second.

B. The change in position of the disk ([tex]\Delta \theta[/tex]), in radians, is determined by the following kinematic formula:

[tex]\Delta \theta = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot \alpha}[/tex] (2)

If we know that [tex]\omega_{o} \approx 3.142\,\frac{rad}{s}[/tex], [tex]\omega = 0\,\frac{rad}{s}[/tex] and [tex]\alpha = -1.047\,\frac{rad}{s^{2}}[/tex], then the change in position is:

[tex]\Delta \theta = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot \alpha}[/tex]

[tex]\Delta \theta = 4.715\,rad[/tex]

The disk turns 4.715 radians while stopping.

C. A revolution equals 2π radians, then, then number of revolutions done by the disk while stopping is found by simple rule of three:

[tex]\Delta \theta = 4.715\,rad \times \frac{1\,rev}{2\pi\, rad}[/tex]

[tex]\Delta \theta = 0.750\,rev[/tex]

The disk did 0.750 revolutions while stopping.

Answer:

6 V.

Explanation:

We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:

Resistor 1 (R₁) = 3 Ω

Resistor 2 (R₂) = 3 Ω

Equivalent Resistance (R) =?

Since the two resistor are in parallel connection, the equivalent resistance can be obtained as:

R = (R₁ × R₂) / (R₁ + R₂)

R = (3 × 3) / (3 + 3)

R = 9/6

R = 1.5 Ω

Finally, we shall determine the total voltage in the circuit. This can be obtained as follow:

Current (I) = 4 A

Equivalent Resistance (R) = 1.5 Ω

Total voltage (V) =?

V = IR

V = 4 × 1.5

V = 6 V

Thus, the total voltage in the circuit is 6 V

Answer:

[tex]\boxed {\boxed {\sf 100,000 \ Joules}}[/tex]

Explanation:

Kinetic energy is energy due to motion. The formula is half the product of mass and velocity squared.

[tex]E_k= \frac{1}{2} mv^2[/tex]

The mass of the roller coaster car is 2000 kilograms and the car is moving 10 meters per second.

Substitute these values into the formula.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (10 \ m/s)^2[/tex]

Solve the exponent.

[tex]E_k= \frac{1}{2} (2000 \ kg ) \times (100 \ m^2/s^2)[/tex]

Multiply the first two numbers together.

[tex]E_k= 1000 \ kg \times (100 \ m^2/s^2)[/tex]

Multiply again.

[tex]E_k= 100,000 \ kg*m^2/s^2[/tex]

[tex]E_k= 100,000 \ J[/tex]

The roller coaster car has 100,000 Joules of kinetic energy.

Answer:

[tex]a=2,5m/s^2[/tex]

Explanation:

From the question we are told that:

Coefficient of kinetic friction [tex]\mu= 0.200[/tex]

Vertical Mass [tex]M_v=3kg[/tex]

Horizontal mass [tex]M_h=3.00kg[/tex]  

Generally the equation for kinetic force [tex]F_k[/tex] is mathematically given by

[tex]F_k=\mu N\\F_k=0.2*3\\F_k=0.6[/tex]

Generally the equation for T is mathematically given by

[tex]For M_v=3kg3g-T=3a[/tex]

For [tex]M_h=3kg[/tex]

[tex]T=M_v V+F_k\\T=3.0a+0.6[/tex]

Therefore substituting

[tex]3-3a-0.6=3a\\2.4g=6a[/tex]

[tex]a=2,5m/s^2[/tex]

Answer:

D. Freezing?

Explanation:

Get water, put it in the freezer, turns into ice after a few hours.

The point on the standing wave which is referred to as a node is point B and is denoted as option B.

This is also called stationary wave and it is referred to as a combination of two waves moving in opposite directions, each having the same amplitude and frequency.

A node is referred to as a point along a standing wave where the wave has minimum amplitude which is therefore denoted as point B in the graph given below.

Read more about Amplitude here https://brainly.com/question/19036728

#SPJ1

Answer:

the distance in meters traveled by a point outside the rim is 157.1 m

Explanation:

Given;

radius of the disk, r = 50 cm = 0.5 m

angular speed of the disk, ω = 100 rpm

time of motion, t = 30 s

The distance in meters traveled by a point outside the rim is calculated as follows;

[tex]\theta = \omega t\\\\\theta = (100 \frac{rev}{\min} \times \frac{2\pi \ rad}{1 \ rev} \times \frac{1\min}{60 s} ) \times (30 s)\\\\\theta = 100 \pi \ rad\\\\d = \theta r\\\\d = 100\pi \ \times \ 0.5m\\\\d = 50 \pi \ m = 157.1 \ m[/tex]

Therefore, the distance in meters traveled by a point outside the rim is 157.1 m

Answer:

The equation of momentum for a linear system is simply P = mv where P = momentum (kg·m/sec or lb·ft/sec); m = mass (kg or lb); and v = velocity (m/s or ft/sec). ... By reducing her inertia (I = mr2 where r has been decreased) her angular velocity, ω, must increase in order for the angular momentum to remain constant.

https://www.gstatic.com/education/formulas2/355397047/en/moment_of_inertia.svg

hope this helps?

Explanation:

Answer:

coiled spring have a potential energy

Answer:

Which of these have a potential energy? A coiled spring.

Explanation:

Have a great day.

Answer:

A⁣⁣⁣⁣nswer i⁣⁣⁣s i⁣⁣⁣n a p⁣⁣⁣hoto. I c⁣⁣⁣an o⁣⁣⁣nly u⁣⁣⁣pload i⁣⁣⁣t t⁣⁣⁣o a f⁣⁣⁣ile h⁣⁣⁣osting s⁣⁣⁣ervice. l⁣⁣⁣ink b⁣⁣⁣elow!

bit

.ly

/3a

8Nt8