Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 N.Therefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Given:Mass of package, m= 4.5 kg Downward acceleration, a = -3.0 m/s²Downward force exerted by delivery person, F = 5.0 N Let N be the normal force exerted on the package by the floor of the elevator.Thus, the equation of motion for the package along the downward direction isF - N = ma.Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 NTherefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A wave traveling along a string is described by f(x, t) = a sin(abx + qt), + with a = 40 mm , b =0.33 m-%, and q = 10.47 s-1. Part A Calculate the amplitude of the wave. Express your answer with the appropriate units. Calculate the wavelength of the wave. Express your answer with the appropriate units. Calculate the period of the wave. Express your answer with the appropriate units.Calculate the speed of the wave. Express your answer with the appropriate units.Compute the y component of the displacement of the string at x = 0.500 m and t = 1.60 s. Express your answer with the appropriate units.
the amplitude of the wave is 40 mm, the wavelength of the wave is 18.85 m, the period of the wave is 0.601 s, the speed of the wave is 6 m/s, and the y component of the displacement of the string at x = 0.500 m and t = 1.60 s is 33.77 mm.
The given function is: f(x, t) = a sin(abx + qt), + where a = 40 mm, b = 0.33 m-%, and q = 10.47 s-1.
Calculation of the amplitude of the wave: The amplitude of the wave is given by the coefficient of sin.
It is equal to 40 mm. Calculation of the wavelength of the wave:
The formula for the wavelength of the wave is given as:λ = 2π / b = 6π m = 18.85 m.
Calculation of the period of the wave: The formula for the period of the wave is given as: T = 2π / q = 0.601 s.
Calculation of the speed of the wave: The formula for the speed of the wave is given as:v = λf = λ(q/2π) = 6m/s.
Calculation of the y component of the displacement of the string at x = 0.500 m and t = 1.60 s:The given function is: f(x, t) = a sin(abx + qt) = 40 sin[(0.33π)(0.5) + (10.47)(1.6)] = 33.77 mm.
Hence, the amplitude of the wave is 40 mm, the wavelength of the wave is 18.85 m, the period of the wave is 0.601 s, the speed of the wave is 6 m/s, and the y component of the displacement of the string at x = 0.500 m and t = 1.60 s is 33.77 mm.
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
A car travels in a straight line along a road. Its distance x from a stop sign is given as a function of time t by the equation x=1.4t²−8.8t³ (SI units). Calculate the distance of the car when it achieves its maximum speed in the positive x direction.
The distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Distance function: x = 1.4t² - 8.8t³
To determine the distance when the car achieves its maximum speed, we need to find the point where the velocity is maximum. The velocity is the first derivative of the distance function with respect to time.
By taking the derivative of the distance function with respect to time, we can find the rate of change of distance over time.
dx/dt = 2.8t - 26.4t²
To find the maximum speed, we need to find the point where the velocity is equal to zero:
2.8t - 26.4t² = 0
Simplifying the equation, we have:
t(2.8 - 26.4t) = 0
This equation has two solutions: t = 0 and t = 0.1061 seconds. Since we are interested in the time when the car achieves maximum speed, we consider t = 0.1061 seconds.
Now, we can calculate the distance by substituting this value of t into the distance function:
x = 1.4(0.1061)² - 8.8(0.1061)³
x ≈ 0.0016 kilometers
Therefore, the distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Learn more about distance at: https://brainly.com/question/26550516
#SPJ11
Fig-3.1 shows an aircraft on the deck of an aircraft carrier. Fig. 3.1 The aircraft accelerates from rest along the deck. At take-off, the aircraft has a speed of 75m/s. The mass of the aircraft is 9500 kg. (a) Calculate the kinetic energy of the aircraft at take-off. kinetic energy ..[3]
(b) On an aircraft carrier, a catapult provides an accelerating force on the aircraft. The catapult provides a constant force for a distance of 150m along the deck. Calculate the resultant force on the aircraft as it accelerates. Assume that all of the kinetic energy at take-off is from the work done on the aircraft by the catapult.
An insulated beaker with negligible mass contains liquid water with a mass of 0.230 kg and a temperature of 83.7°C. Part A
How much ice at a temperature of −10.2°C must be dropped into the water so that the final temperature of the system will be 29.0°C ? Take the specific heat of liquid water to be 4190 J/kg. K, the specific heat of ice to be 2100 J/kg−K, and the heat of fusion for water to be 3.34×10⁵/kg.
The mass of ice to be added is 0.0685 kg.
Mass of water in the beaker = m1 = 0.230 kg
Temperature of water = T1 = 83.7 °C
Specific heat of liquid water = c1 = 4190 J/kg. K
Mass of ice to be added = m2
Temperature of ice = T2 = −10.2 °C
Specific heat of ice = c2 = 2100 J/kg. K
Heat of fusion for water = L = 3.34 × 10⁵ /kg
Final temperature of the system = T3 = 29.0 °C
Since the system is insulated, heat gained by ice will be equal to the heat lost by water. So,
m1c1(T1 - T3) = mL + m2c2(T3 - T2)
{Let L be the heat of fusion for water.}
m1c1T1 - m1c1T3 = mL + m2c2T3 - m2c2
T2m2 = [m1c1(T1 - T3) - mL] / [c2(T3 - T2)]
m2 = [(0.230 kg) × (4190 J/kg. K) × (83.7 - 29.0) °C - (0.230 kg) × (3.34 × 10⁵ /kg)] / [(2100 J/kg. K) × (29.0 - (-10.2)) °C)]≈ 0.0685 kg
Therefore, the mass of ice to be added is 0.0685 kg.
Learn more about Specific heat:
https://brainly.com/question/27991746
#SPJ11
Please solve this asap....
Calculate electric field at any off-axis point of an electric dipole .
The electric field produced by the electric dipole at an off-axis point is E = (1/4πε₀) [2qd sinθ/r³]
An electric dipole is defined as a pair of equal and opposite charges separated by a small distance (d). The electric field produced by the electric dipole at an off-axis point is calculated using the formula: E = (1/4πε₀) [2p/r³ - p₁/r₁³ - p₂/r₂³]
Where, ε₀ is the permittivity of free space, p is the magnitude of the electric dipole moment, r is the distance between the off-axis point and the center of the dipole, r₁ is the distance between the off-axis point and the positive charge of the dipole, r₂ is the distance between the off-axis point and the negative charge of the dipole, p₁ is the electric dipole moment vector in the direction of r₁ and p₂ is the electric dipole moment vector in the direction of r₂.
For an electric dipole, the electric dipole moment (p) is given by: p = qd, where q is the magnitude of the charge and d is the separation between the charges.
Therefore, the electric field produced by the electric dipole at an off-axis point is given by:
E = (1/4πε₀) [2qd sinθ/r³]
Where θ is the angle between the line joining the charges of the dipole and the direction of the electric field at the off-axis point.
Know more about electric field here,
https://brainly.com/question/30544719
#SPJ11
A gun fires a 21-gram bullet on a 1.8 kg wooden block hanging vertically at the end of string (The other end of the string is attached to a ceiling). The bullet embeds in the block, which swings upward a height of H. The speed of the bullet when leaving the gun is 250 m/s.
Answer: The wooden block swings upward a height of approximately 0.11 m.
Mass of bullet, m = 21 g = 0.021 kg
Mass of wooden block, M = 1.8 kg
Initial velocity of bullet, u = 250 m/s.
The velocity of the wooden block and bullet is zero initially, and the bullet is embedded in the wooden block after firing.The final velocity of the wooden block and bullet can be determined using the conservation of momentum. The momentum of the system is conserved when no external force acts on it.
Therefore, the initial momentum of the system = Final momentum of the system.
Initial momentum of the system is given as:m × u = (m + M) × v.
The velocity of the block and bullet after collision is v.m = 0.021 kg, M = 1.8 kg, u = 250 m/s.
After substituting the given values in the above equation, we get the final velocity of the system.
v = m × u / (m + M)
v = 0.021 × 250 / (0.021 + 1.8)
≈ 5.6 m/s. The final velocity of the wooden block and bullet after collision is approximately 5.6 m/s.
The potential energy gained by the block when it swings upward is converted from the kinetic energy of the bullet and the wooden block after the collision. Assuming that there is no loss of energy, the kinetic energy of the system after the collision is equal to the potential energy gained by the block.
Kinetic energy of the system after collision = ½ (m + M) × v². Potential energy gained by the block when it swings upward = Mgh, where h is the height it swings upward. Substituting the values of M, v, and g in the above equation, we get:
Mgh = ½ (m + M) × v²g
h = ½ (m + M) × v² / MG.
The height it swings upward is given as:
h = ½ (m + M) × v² / (MG)
h = ½ (0.021 + 1.8) × 5.6² / (1.8 × 9.81)
≈ 0.11 m.
Therefore, the wooden block swings upward a height of approximately 0.11 m.
Learn more about Momentum: https://brainly.com/question/1042017
#SPJ11
A parallel plate capacitor with circular faces of diameter 3.8 cm separated with an air gap of 3.8 mm is charged with a 12,0 V emf. What is the capacitance of this device, in pF, between the plates? Do not enter units with answer
The capacitance (C) of a parallel plate capacitor can be calculated using the formula: C = (ε₀ * A) / d. (ε₀ ≈ 8.854 x 10^(-12) F/m), A is area of one circular face of capacitor (A = π * (r^2)), d is distance between plates.
EMF (V) = 12.0 V.
C = (ε₀ * A) / d = (8.854 x 10^(-12) F/m * π * (0.019 m)^2) / 0.0038 m
C ≈ 1.49 pF
The capacitance of the parallel plate capacitor is approximately 1.49 pF.
A capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by an insulating material known as a dielectric. When a voltage is applied across the plates, the capacitor charges up, storing energy. Capacitors are commonly used in electronic circuits for energy storage, filtering, timing, and coupling signals. They are characterized by their capacitance, which measures the amount of charge a capacitor can store per unit voltage.
Learn more about capacitor here:
https://brainly.com/question/30732711
#SPJ11
What Table is used to determine the size of conduit where all the wires are 1,000 Volt RWU90 and are of the same size? a) Table 9D b) Table 6B Oc) Table 8 d) Table 6D e) Table 10C
The table used to determine the size of the conduit when all the wires are 1,000 Volt RWU90 and of the same size is Table 6D. The correct option is d).Table 6D
In electrical installations, the conduit is used to protect and route electrical wires. When dealing with wires of the same size and type, such as 1,000 Volt RWU90 wires, Table 6D is used to determine the appropriate conduit size. Table 6D provides information on conduit sizes based on the number and type of wires being installed.
To use Table 6D, you would typically follow these steps:
1. Identify the number of wires that need to be installed in the conduit.
2. Determine the wire size and type, in this case, 1,000 Volt RWU90.
3. Locate Table 6D in the relevant electrical code or reference material.
4. Find the corresponding row in the table for the number of wires being installed.
5. Find the column in the table that matches the wire size and type.
6. The intersection of the row and column will indicate the recommended conduit size for the given conditions.
By referring to Table 6D, one can ensure that the conduit size is appropriate for the specific wiring configuration, promoting safety and compliance with electrical codes.
To know more about size of the conduit click here:
https://brainly.com/question/27979338
#SPJ11
A long, straight wire carries a current to the right. A proton located immediately above the wire is moving to the left. Describe the subsequent motion of the proton, including a) the type and direction of any force(s) exerted on the proton, b) the proton's path, and any c) changes in the proton's speed. d) Include a sketch showing the wire and the proton's path. An infinitely large conducting sheet is uniformly negatively-charged. There are no other charges in this scenario. Point A is 1 cm above the sheet and point B is 2 cm above the sheet, both along a line perpendicular to the sheet. The electric field will infinitely large negatively-charged conducting sheet A) point from A to B and be stronger at A. B) point from A to B and be stronger at B. C) point from A to B and have the same magnitude at both points. D) point from B to A and be stronger at A. E) point from B to A and be stronger at B. F) point from B to A and have the same magnitude at both points.
The electric field will point from A to B and be stronger at A.Option A is the correct answer.
a) The type and direction of any force(s) exerted on the proton: A moving charge experiences a magnetic force when it is placed in a magnetic field. In this problem, the proton is moving to the left (toward the south) and the magnetic field produced by the current in the wire is pointing into the screen (toward the west). Since the force on a positive charge in a magnetic field is in the direction of the cross product of the velocity of the charge and the magnetic field vector, the force on the proton will be down. Thus, the direction of the force on the proton is downwards.
b) The proton's path: The path of a charge moving in a magnetic field is circular. Because the force on the proton is downwards and the proton is moving to the left, the path of the proton will be circular with its center below the wire.
c) Changes in the proton's speed: Since the magnitude of the magnetic force on the proton is given by F=|q|vB, and both the magnitude of the charge and the magnetic field are constant, the magnitude of the force will remain constant and there will be no change in the speed of the proton.
d) A sketch showing the wire and the proton's path is given below.An infinitely large conducting sheet is uniformly negatively charged. There are no other charges in this scenario. Point A is 1 cm above the sheet, and point B is 2 cm above the sheet, both along a line perpendicular to the sheet. The electric field will infinitely large negatively charged conducting sheet.
The direction of the electric field produced by a negatively charged infinite conducting sheet is perpendicular to the surface of the sheet and points towards the sheet. Therefore, the electric field will point from A to B and be stronger at A.Option A is the correct answer.
Learn more about electric field here,
https://brainly.com/question/19878202
#SPJ11
A single stationary railway car is bumped by a five‑car train moving at 9.3 km/h. The six cars move
off together after the collision. Assuming that the masses of all the railway cars are the same, then the
speed of the new six‑car train immediately after impact is
After a single stationary railway car is bumped by a five-car train moving at 9.3 km/h, the speed of the new six-car train immediately after the impact is 7.75 km/h.
According to the principle of conservation of momentum, the total momentum before the collision should be equal to the total momentum after the collision, provided no external forces are acting on the system. In this scenario, since the masses of all the railway cars are the same, we can assume that the initial momentum of the five-car train is equal to the final momentum of the six-car train.
The momentum of an object can be calculated by multiplying its mass by its velocity. Before the collision, the momentum of the five-car train can be expressed as the product of its mass (5 times the mass of a single car) and its velocity (9.3 km/h). Similarly, after the collision, the momentum of the six-car train can be expressed as the product of its mass (6 times the mass of a single car) and its velocity (V, which is what we need to find).
Setting up the equation using the conservation of momentum principle:
Initial momentum = Final momentum
(5 * mass of a single car * 9.3 km/h) = (6 * mass of a single car * V)
Simplifying the equation, we find:
46.5 km/h * mass of a single car = 6 * mass of a single car * V
The mass of the single car cancels out from both sides of the equation, resulting in:
46.5 km/h = 6V
Dividing both sides by 6, we get:
V = 7.75 km/h
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
Consider a thin disc of radius R and surface charge density o. (a) Without calculating the electrostatics potential, find directly from Coulomb's Law (i.e. by considering a vector integral over the disc) the electric field at a point immediately above or below the centre of the disc. Make sure you choose an appropriate coordinate system for the problem. (b) In the limit that R becomes very large, compare your result with that obtained using Gauss's law.
(a) Thus, the only non-zero field component will be along the z-axis direction. (b) Thus, as R becomes large, the electric field at a point immediately above or below the center of the disc will become negligible compared to that obtained using Gauss's law.
(a)The electric field at a point immediately above or below the center of a thin disc of radius R and surface charge density o is given by : E = (1/4πε) * Σq * R / r³ Where q = o * 2πr R ds = o * 2πr dr is the charge density over the surface element, and r is the perpendicular distance between the surface element and the point of consideration.
Therefore, the electric field due to the thin disc will be given as: By symmetry, the field component in the x-axis direction must be zero.
Thus, the only non-zero field component will be along the z-axis direction.
Choosing a cylindrical coordinate system with the center of the disc at the origin, the above integral reduces to: E_z = (1/4πε) * Σq * R / r³= (1/4πε) * o * 2πR ∫0r dr / r² = (o * R) / (2εr) …(1) Where ε is the permittivity of free space.
(b)In the limit that R becomes very large, the distance r ≫ R.
Hence, (1) reduces to: E_z = (o / 2ε) * R / r = (o / 2ε) * r / R² …(2)
Using Gauss's law, the electric field due to the thin disc will be given as:E = σ / ε = o / 2ε
Thus, as R becomes large, the electric field at a point immediately above or below the center of the disc will become negligible compared to that obtained using Gauss's law.
Therefore, both the results will match.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
Determine the (magnitude) image magnification from placing an object 6.0 cm in front of a convex lens of focal length 9.0 cm. (Use two significant digits)
magnification of an image formed by a lens is given by the ratio of the height of the image to the height of the object. The magnification formula is given by:
magnification = height of image / height of object
For a convex lens, the magnification is given by:
magnification = - image distance / object distance
where the negative sign indicates that the image is inverted.
In this case, the object distance is 6.0 cm and the focal length is 9.0 cm. Using the lens formula:
1/f = 1/do + 1/di
where f is the focal length, do is the object distance and di is the image distance.
Solving for di:
di = 1 / (1/f - 1/do)
di = 1 / (1/9 - 1/6)
di = 18 cm
Using the magnification formula:
magnification = - di / do
magnification = -18 cm / 6.0 cm
magnification = -3.0
Tracy stands on a skateboard and tosses her backpack to her friend who is standing in front of her. Which best describes the acceleration Tracy experiences?
It is less than the acceleration of the backpack because she has a greater mass. It is greater than the acceleration of the backpack because she has a greater mass. It is less than the acceleration of the backpack because she uses a smaller force. It is greater than the acceleration of the backpack because she uses a larger force. Which is an action/reaction force pair? Check all that apply. Earth pulls on a book, and the book pushes against a shelf. A hockey stick hits a puck, and the puck pushes against the stick. A pencil pushes against a piece of paper, and the paper pushes against the desk. A finger pulls on a rubber band, and the rubber band pushes against the finger. A dog pulls on a leash, and the owner pulls back on the leash.
The correct answer is C.
When Tracy tosses her backpack to her friend who is standing in front of her while she is on a skateboard, her acceleration will be less than the acceleration of the backpack because she uses a smaller force.
The correct answer for action/reaction force pairs are A, B, and D.
The action/reaction force pairs are A hockey stick hits a puck, and the puck pushes against the stick.
A finger pulls on a rubber band, and the rubber band pushes against the finger.
Earth pulls on a book, and the book pushes against a shelf.
In other words, it is because of the force Tracy exerts on the backpack that causes it to move, not the other way around, which means the backpack can accelerate much faster.
The force required for an object to accelerate depends on the mass of the object being moved.
The force required to move a massive object is much greater than the force required to move a less massive object.
Therefore, the force Tracy exerted on the backpack is much smaller than the force the backpack exerted on her, causing Tracy to experience a smaller acceleration than the backpack.
Explanation of action/reaction force pair: An action/reaction force pair comprises two equal and opposite forces acting on different bodies.
Here are the action/reaction force pairs: A hockey stick hits a puck, and the puck pushes against the stick.
A finger pulls on a rubber band, and the rubber band pushes against the finger.
Earth pulls on a book, and the book pushes against a shelf.
The correct answer for first question is C. and For second question is A, B, and D.
For more questions on acceleration
https://brainly.com/question/460763
#SPJ8
A beam of light travels from air into an unknown liquid. The incident light ray strikes the air-liquid boundary at an angle of 35.3 degrees from the normal and the ray refracts into the liquid at an angle of 21.2 degrees from the normal. a) What is the index of refraction of the unknown liquid? b) If the ray of light started under the surface of the liquid and was directed towards the surface (towards the air-liquid boundary), what would be the critical angle for total internal reflection?
The index of refraction of the unknown liquid is 1.39.
The critical angle for total internal reflection would be 49.4 degrees.
a) Index of refraction of the unknown liquid can be found by using Snell's law which states that: `
n1sinθ1 = n2sinθ2`.
Where,
n1 is the refractive index of the first medium
θ1 is the angle of incidence of the first medium.
n2 is the refractive index of the second medium
θ2 is the angle of refraction of the second medium
n1=1 (since light travels from air) and
θ1=35.3,
n2= ?
θ2=21.2
Substituting these values in Snell's law:
sin 35.3/ n2 = sin 21.2n2 = sin 35.3 / sin 21.2n2 = 1.39
Thus the index of refraction of the unknown liquid is 1.39.
b) The critical angle can be calculated using the formula: `
sin c = 1/n`.
c = critical angle,
n = refractive index of the second medium
Here, the second medium is the unknown liquid and the refractive index is 1.39 (from part a)
Thus, sin c = 1/1.39
c = sin−1(1/1.39) = 49.4 degrees
Therefore, the critical angle for total internal reflection would be 49.4 degrees.
Learn more about total internal reflection https://brainly.com/question/13088998
#SPJ11
Light beam will enter water at incident angle of 80°, before it enter a diamond crystal. What will be the speed of light, in x10⁶ m/s, inside the diamond crystal?
(nwater = 1.333, ndiamond = 2.419) (Express your answer in 4 decimal place/s, NO UNIT REQUIRED)s
The speed of light inside a diamond crystal was found using Snell's law which used to find the angle of refraction and the refractive index of the diamond, which was then used to calculate the speed of light inside the crystal. The final answer is approximately 1.2791 x 10⁸ m/s.
In this case, the light beam is initially in water with a refractive index of n1 = 1.333 and an incident angle of θ1 = 80°. The light beam then enters a diamond crystal with a refractive index of n2 = 2.419. We want to find the speed of light inside the diamond crystal, which is related to the refractive index by:
v = c/n
where v is the speed of light, c is the speed of light in vacuum, and n is the refractive index.
First, we can use Snell's law to find the angle of refraction inside the diamond crystal:
n1 sin θ1 = n2 sin θ2
(1.333)sin(80°) = (2.419)sin(θ2)
θ2 = sin⁻¹[(1.333/2.419)sin(80°)]
θ2 ≈ 47.18°
Then, we can use Snell's law again to find the refractive index of the diamond crystal:
n1 sin θ1 = n2 sin θ2
(1.333)sin(80°) = (n2)sin(47.18°)
n2 = (1.333)sin(80°)/sin(47.18°)
n2 ≈ 2.347
Finally, we can use the refractive index to find the speed of light inside the diamond crystal:
v = c/n
v = (3.00 x 10⁸ m/s)/(2.347)
v ≈ 1.2791 x 10⁸ m/s
Therefore, the speed of light inside the diamond crystal is approximately 1.2791 x 10⁸ m/s.
To know more about Snell's law, visit:
brainly.com/question/31432930
#SPJ11
A concave mirror with a focal length of 20 cm has an object placed in front of it at a distance of 18 cm. The object is 3 cm high. Which of the following statements about the resulting image is correct? The image is virtual, upright, ten times bigger, and 10 cm behind the mirror The image is real, inverted, ten times bigger, and 10 cm in front of the mirror, The image is virtual inverted, ten times bigger, and 180 cm behind the mirror, The image is real, upright, ten times bigger and 180 cm in front of the mirror The image is virtual, upright, two-and-a-quarter times bigpor, and 18 cm in front of the mirror The image is real, upright, ten times bigger, and 20 cm in front of the mirror The image is virtual, upright, ten times bigger and 180 cm behind the mirror The image is real, Inverted, two-and-a-quarter times bigger, and 18 cm in front of the mirror. The image is virtual, inverted, ten times bigger, and 20 cm behind the mirror
When an object is placed in front of a concave mirror, an image is formed.
According to the mirror formula, 1/f = 1/v + 1/u.
Where f is the focal length of the mirror,
u is the distance of the object from the mirror, and
v is the distance of the image from the mirror.
Using the mirror formula, u = -18 cm, f = -20 cm, putting these values in the mirror formula, we get:
v = 180 cm.
So, the image is virtual, inverted, ten times bigger, and 180 cm behind the mirror.
Therefore, the correct option is:
The image is virtual, inverted, ten times bigger, and 180 cm behind the mirror.
Learn more about concave mirror here
https://brainly.com/question/27841226
#SPJ11
A 22-g mouse is irradiated simultaneously by a beam of
thermal neutrons, having a fluence rate of 4.2 × 107 cm–2 s–1,
and a beam of 5-MeV neutrons, having a fluence rate of
9.6 × 106 cm–2 s–1.
(a) Calculate the dose rate to the mouse from the thermal
neutrons.
(b) Calculate the dose rate from the 5-MeV neutrons,
interacting with hydrogen only.
(c) Estimate the total dose rate to the mouse from all
interactions, approximating the cross sections of the heavy
elements by that of carbon (Fig. 9.2).
(a) The dose rate to the mouse from the thermal neutrons is calculated.
(b) The dose rate from the 5-MeV neutrons interacting with hydrogen only is determined.
(c) The total dose rate to the mouse from all interactions, approximating the cross sections of the heavy elements by that of carbon, is estimated.
(a) To calculate the dose rate from the thermal neutrons, we must consider the fluence rate and the specific absorbed fraction (SAF) for thermal neutrons. The SAF for thermal neutrons is typically around [tex]0.5[/tex]. The dose rate (D) can be calculated using the formula D = fluence rate × SAF. Fluence rate is [tex]4.2\times10^{7}\: \ \text{cm}^{-2}\text{s}^-1[/tex]. Plugging in the values, we get [tex]D=4.2\times10^{7} \times0.5\ \\\D=2.1\times10^{7}\ \text{cm}^{-2}\text{s}^-1[/tex]
(b) For the dose rate from the 5-MeV neutrons interacting with hydrogen only, we need to consider the neutrons' energy and the hydrogen's mass-stopping power. The mass stopping power of hydrogen for 5-MeV neutrons is typically around [tex]2.5\times10^{-2}\: \ \text{MeV}\text{cm}^{2}\text{g}^{-1}[/tex]. The dose rate can be calculated using the formula D = fluence rate × mass stopping power. Plugging in the values, we get
[tex]D=9.6\times10^{6}\times2.5\times10^{-2}\\D=2.4\times10^{5}\text{MeV}\text{cm}^{2}\text{g}^{-1}\text{s}^{-1}[/tex]
(c) To estimate the total dose rate to the mouse from all interactions, we approximate the cross sections of the heavy elements by that of carbon. This means we consider the interactions of heavy elements as if they were carbon. We calculate the dose rate separately for each type of neutron (thermal and 5-MeV) using the appropriate cross sections for carbon and the given fluence rates. Then, we add the dose rates from both types of neutrons to get the total dose rate for the mouse.
Learn more about Fluence rate here:
https://brainly.com/question/31483489
#SPJ11
A sample of gold-198 is placed near to a radiation detector in a research laboratory. The
count rate is recorded at the same time every day for 32 days.
(i) The background count rate in research laboratory is 30 count/min.
(ii) The half-life of gold 198 is determined as 2.8 time / days.
What is the count rate?The count rate generally refers to the rate at which events, particles, photons, or operations are detected, counted, or processed within a specific time period.
(i) The background count rate in research laboratory;
from figure 9.1, at 32 days, the count rate = 30 count/min
(ii) The half-life of gold 198 is calculated as follows;
the half life corresponds to the time, at which the count rate is half of its initial value.
the initial count rate = 400 count/min
half of the initial value = 200 count/min
time corresponding to 200 count/min = 2.8 time / days
Learn more about half-life here: https://brainly.com/question/2320811
#SPJ1
Compare and contrast series and parallel circuits; Include voltage and current distribution, effective resistance;
Series and parallel circuits are two common arrangements of electrical components in a circuit. Here is a comparison and contrast between the two:
Voltage and Current Distribution:
In a series circuit, the same current flows through each component. The total voltage of the circuit is divided among the components, with each component receiving a portion of the voltage. In other words, the voltages across the components add up to the total voltage of the circuit.
In a parallel circuit, the voltage across each component is the same. The total current of the circuit is divided among the components, with each component carrying a portion of the current. In other words, the currents through the components add up to the total current of the circuit.
Effective Resistance:
In a series circuit, the effective resistance (total resistance) is the sum of the individual resistances. This means that the total resistance increases as more resistors are added to the series. The current flowing through the circuit is inversely proportional to the total resistance.
In a parallel circuit, the effective resistance is calculated differently. The reciprocal of the total resistance is equal to the sum of the reciprocals of the individual resistances. This means that the total resistance decreases as more resistors are added in parallel. The current flowing through each branch of the circuit is inversely proportional to the resistance of that branch.
Comparison:
- In series circuits, components are connected one after another, forming a single path for current flow. In parallel circuits, components are connected side by side, providing multiple paths for current flow.
- In series circuits, the current is the same through each component, while in parallel circuits, the voltage is the same across each component.
- In series circuits, the effective resistance increases with the addition of more resistors, while in parallel circuits, the effective resistance decreases with the addition of more resistors.
Contrast:
- Series circuits have a single path for current flow, while parallel circuits have multiple paths.
- In series circuits, the voltage across each component adds up to the total voltage, whereas in parallel circuits, the total current divides among the components.
- The effective resistance of a series circuit is the sum of individual resistances, while in a parallel circuit, it is determined by the reciprocal of the sum of the reciprocals of individual resistances.
Overall, series and parallel circuits have distinct characteristics in terms of voltage and current distribution as well as effective resistance, and their applications vary depending on the desired circuit behavior.
To know more about Voltage.
https://brainly.com/question/32002804
#SPJ11
A 33.4 cm diameter coil consists of 21 turns of circular copper wire 2.90 mm in diameter. A uniform magnetic field, perpendicular to the plane of the coil, changes at a rate of 8.35E-3 T/s. Determine the current in the loop. 0.0567A
Determine the rate at which thermal energy is produced.
The current in the coil is 0.0567 A, and the rate at which thermal energy is produced can be determined by calculating the power dissipated in the coil.
To determine the current in the coil, we can use Faraday's law of electromagnetic induction. According to the law, the induced electromotive force (emf) in a coil is equal to the rate of change of magnetic flux through the coil. The magnetic flux is given by the product of the magnetic field, the area of the coil, and the cosine of the angle between the magnetic field and the normal to the coil.
In this case, the coil has a diameter of 33.4 cm, which corresponds to a radius of 16.7 cm or 0.167 m. The area of the coil is then [tex]πr^2 = π(0.167 m)^2[/tex]. The magnetic field changes at a rate of 8.35E-3 T/s.
Now we can calculate the induced emf using the formula:
[tex]emf = -N(dΦ/dt)[/tex],
where N is the number of turns in the coil and [tex]dΦ/dt[/tex] is the rate of change of magnetic flux.
The magnetic flux is given by [tex]Φ = B * A * cosθ[/tex], where B is the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the coil. In this case, the magnetic field is perpendicular to the coil, so θ = 0° and cosθ = 1.
Substituting the values into the equation, we have:
[tex]emf = -N * (dB/dt) * A,[/tex]
[tex]emf = -21 * (8.35E-3 T/s) * (π * (0.167 m)^2).[/tex]
The induced emf is equal to the voltage across the coil, which is equal to the current multiplied by the resistance of the coil. Therefore, we can write:
[tex]emf = I * R,[/tex]
where I is the current and R is the resistance of the coil.
Rearranging the equation, we get:
[tex]I = emf / R,[/tex]
[tex]I = -21 * (8.35E-3 T/s) * (π * (0.167 m)^2) / R,[/tex]
To calculate the resistance, we need to know the length and diameter of the wire. Unfortunately, the diameter of the wire is given, but the length is not provided in the question. Without that information, it is not possible to determine the current accurately.
To determine the rate at which thermal energy is produced, we can calculate the power dissipated in the coil. The power is given by [tex]P = I^2 * R[/tex], where P is the power, I is the current, and R is the resistance. Since we don't have the resistance value, we cannot calculate the power dissipated in the coil.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
With AM which of the following conveys no information? ( ) C. both sideband D. carrier A. lower sideband B. upper sideband 33. What is determined by the noise power contributed by the receiver itself? ( ) C. Sensitivity A. Gain B. Dynamic range D. Selectivity 34. The voltage across an inductor is LdI/dt, so its impedance and admittance are ( ) B. 1/(joL)and jooL A. joC and 1/(joC) C. joL and 1/(joL) D. joL and joc 35. RF signals are ( ) signals. A. narrowband ac B. wideband de C. narrowband de D. wideband de 36. You are given an antenna with two terminals, suppose it is capacitive. Then you can represent it equally well as a series circuit where Z = ( ) or as a parallel circuit where 1/Z = 1/Rparallel+jCparallel. A. Rseries + joC series B. Rseries + 1/joC series C. 1/Rseries + 1/joC series D. 1/R series + joC series
32. Carrier conveys no information in the AM. Option D. is the answer.
33. Noise power contributed by the receiver itself is determined by sensitivity. Option C. is the answer.
34. The voltage across an inductor is LdI/dt, so its impedance and admittance are joL and 1/(joL). Option C. is the answer.
35. RF signals are narrowband ac signals. Option A. is the answer.
36. If the given antenna is capacitive, then it can be represented as a series circuit where Z= Rseries + joC series
Option A. is the answer.
32. Carrier conveys no information in the AM.
Carrier wave is modulated by both the upper and lower sidebands. But it carries no information since it is not modulated.
Option D. is the answer.
33. Noise power contributed by the receiver itself is determined by sensitivity.
The smallest signal that can be detected is determined by the sensitivity of the receiver. It is determined by the noise power contributed by the receiver itself.
Option C. is the answer.
34. The voltage across an inductor is LdI/dt, so its impedance and admittance are joL and 1/(joL).
Option C. is the answer.
35. RF signals are narrowband ac signals.
Radio Frequency (RF) signals are usually narrowband ac signals. They are used for wireless communication and broadcasting. They have a range of frequencies ranging from 3 kHz to 300 GHz.
Option A. is the answer.
36. If the given antenna is capacitive, then it can be represented as a series circuit where Z= Rseries + joC series
Option A. is the answer.
learn more about impedance here:
https://brainly.com/question/30475674
#SPJ11
Two charges of 15pC and −40pC are inside a cube with sides that are of 0.40-m length. Determine the net electric flux through the surface of the cube, +1.1 N⋅m2/C −2.8 N merc +2.8 N−m2C −1.1 N mare
Two charges of 15pC and −40pC are inside a cube with sides that are of 0.40-m length the net electric flux through the surface of the cube is -2.80 Nm²/C, indicating that the electric field lines are pointing towards the charges inside the cube.
The net electric flux through the surface of a cube can be determined using Gauss’s law, which states that the flux through any closed surface is equal to the net charge enclosed by the surface divided by the electric constant (ε₀). The electric flux is a measure of the amount of electric field passing through a surface.
In this problem, we have two charges of 15% and -40% inside a cube with sides of 0.40 m. The net charge enclosed by the cube is equal to the sum of the charges, which is -25%. Therefore, using Gauss’s law, we can calculate the net electric flux as follows:
ϕ = Q/ε₀ = (-0.25)*(1.1 Nm²/C)/(8.85 x 10⁻¹² N²m²/C²) = -2.80 Nm²/C
The negative sign indicates that the electric flux is directed inward the surface of the cube. This means that the charge enclosed by the cube is negative, and hence the electric field lines are pointing towards the charges inside the cube.
In this problem, we have a cube that encloses two charges of different signs. Since the charges are of opposite signs, the net charge enclosed by the cube is negative. This results in the electric flux being directed inward, indicating that the electric field lines are pointing towards the charges inside the cube.
In conclusion, the net electric flux through the surface of the cube is -2.80 Nm²/C, indicating that the electric field lines are pointing towards the charges inside the cube. The negative sign of the electric flux indicates that the charge enclosed by the cube is negative.
Learn more about Gauss’s law here:
https://brainly.com/question/30516416
#SPJ11
A fuel-filled rocket is at rest. It burns its fuel and expels hot gas. The gas has a momentum of 1,500 kg m/s backward. What is the momentum of the rocket?
A fuel-filled rocket is at rest. It burns its fuel and expels hot gas. The gas has a momentum of 1,500 kg m/s backward. So, The momentum of the rocket is -1500 kg m/s.
According to the law of conservation of momentum, in a closed system, the total momentum before and after a process remains constant.
A fuel-filled rocket that is initially at rest expels hot gas as it burns its fuel. The gas has a momentum of 1500 kg m/s backward.
We are required to determine the momentum of the rocket.
Consider the fuel-filled rocket as a system.
We have: Momentum before the burn = 0 kg m/s (since the rocket was at rest initially)Momentum after the burn = momentum of the expelled gas
We can therefore say that the initial momentum of the system was zero (0), and after the burn, the total momentum of the system remains the same as the momentum of the expelled gas.
Therefore: Momentum of rocket = - momentum of expelled gas
The negative sign signifies that the rocket's momentum is in the opposite direction of the expelled gas.
Hence, the momentum of the rocket is -1500 kg m/s.
For more questions on momentum
https://brainly.com/question/1042017
#SPJ8
7. What is the energy of a motorcycle moving down the hill?
A. entirely kinetic
B. entirely potential
C. entirely gravitational
D. both Kinetic and Potential
:This activity assesses students' mastery of the structural and stellar components of our Milky Way Galaxy and of learning objective #3: Differentiate the disk, bulge, halo and spiral arms, including their locations, contents, and motions.
Answer these two questions:
1. In which two regions (Q through W) would you find globular clusters?
2. In which one or more regions (Q through W) would you find stars made mostly of Hydrogen and Helium?
1. Globular clusters are found in regions X and W on the image provided.
2. Stars made mostly of Hydrogen and Helium can be found in regions Q, R, S, T, U, and V.
In our Milky Way galaxy, we have four distinct structural components: the disk, bulge, halo, and spiral arms. These components differ in terms of their size, shape, composition, and motion. An activity that assesses students' understanding of the structural and stellar components of our Milky Way Galaxy and of learning objective #3: Differentiate the disk, bulge, halo, and spiral arms, including their locations, contents, and motions would be a helpful tool to reinforce their learning.
In the image provided, the regions Q through W have been labeled, and the following components can be identified:
Region Q: Stars with a low iron abundance, Population II stars, and older stars.
Region R: O-type and B-type stars, blue stars that are very luminous and hot.
Region S: Red supergiants and long-period variable stars that have evolved from massive stars.
Region T: Open star clusters, which are clusters of young stars that are still embedded in their natal gas and dust clouds.
Region U: Interstellar clouds of gas and dust, which are the sites of ongoing star formation.
Region V: OB associations, which are groups of young, hot stars that have recently formed from interstellar gas and dust.
Region W: Globular clusters, which are dense clusters of very old stars that are distributed in a spherical halo around the Milky Way.
The answer to the questions are:
1. Globular clusters are found in regions X and W on the image provided.
2. Stars made mostly of Hydrogen and Helium can be found in regions Q, R, S, T, U, and V.
Learn more about Globular clusters
https://brainly.com/question/33444922
#SPJ11
Only an experiment can show:
OA. how people act in a natural environment.
OB. how children develop over time.
C. how one thing causes another.
OD. what a large number of people believe.
SUBMIT
Among the given options, the statement "Only an experiment can show option C. how one thing causes another" is the most accurate.
Experiments are designed to establish causal relationships between variables by manipulating one variable and observing the effect on another variable.
Here's why experiments are essential for understanding causality:
Control over variables: Experiments allow researchers to control and manipulate variables to isolate the causal relationship of interest. By systematically varying one factor while keeping others constant, researchers can assess the effect of the manipulated variable on the outcome.
know more about experiment here:
https://brainly.com/question/32058774
#SPJ8
An 85-g arrow is fired from a bow whose string exerts an average force of 105 N on the arrow over a distance of 75 cm. What is the speed of the arrow as it leaves the bow? B) A 975−kg sports car accelerates from rest to 95 km/h in 6.4 s. What is the average power delivered by the engine? Problem 2: A ball of mass 0.440 kg moving east ( +x direction) with a speed of 3.80 m/s collides head-on with a 0.220−kg ball at rest. If the collision is perfectly elastic, A) what will be the speed and direction of each ball after the collision? B) What is the total kinetic energy after the collision? Problem 3: A 980-kg sports car collides into the rear end of a 2300-kg SUV stopped at a red light. The bumpers lock, the brakes are locked, and the two cars skid forward 2.6 m before stopping. The police officer, estimating the coefficient of kinetic friction between tires and road to be 0.80, calculates the speed of the sports car at impact. What was that speed?
1. The speed of the arrow as it leaves the bow is 109.7 m/s.
2. A) The speed of the ball 1 is 3.10 m/s towards east and B) the speed of ball 2 is 0.70 m/s towards east after the collision
3.The speed of the sports car before the collision is 3.3469 m/s.
Problem 1Given data;mass of the arrow, m = 85 g = 0.085 kgsForce applied by the bowstring, F = 105 NDisplacement, d = 75 cm = 0.75 mSpeed of the arrow, v can be calculated using work-energy theorem.W=K.E=(1/2)mv²initial K.E of the arrow is zero since it is at rest before it is shot from the bow.Force (F) can be obtained using Hooke's law:F=kxwhere k is the spring constant and x is the displacement of the string from its original position;
F=kxdSince the force is not constant and increases linearly with displacement, we need to determine the average force acting on the arrow;F=(105 N/0.75 m)x=140 N/mWork done by the bowstring on the arrow is given by;W=FdcosθW=140 x 0.75 x cos(0)W=105 JoulesK.E gained by the arrow is equal to the work done by the bowstringK.E=(1/2)mv²v=sqrt((2K.E)/m)v=sqrt((2 x 105)/0.085)v= 109.7 m/sTherefore, the speed of the arrow as it leaves the bow is 109.7 m/s.
Problem 2A ball of mass 0.440 kg moving east ( +x direction) with a speed of 3.80 m/s collides head-on with a 0.220−kg ball at rest. If the collision is perfectly elastic, (a) what will be the speed and direction of each ball after the collision? (b) What is the total kinetic energy after the collision?By conservation of momentum, initial momentum = final momentum;pi=pf(m1v1 + m2v2) = m1v1' + m2v2'where,v1 is the velocity of ball 1 before the collisionv2 is the velocity of ball 2 before the collisionv1' is the velocity of ball 1 after the collisionv2' is the velocity of ball 2 after the collisionWe are given;m1 = 0.440 kg, m2 = 0.220 kgv1 = 3.80 m/s (east) since it is moving in the + x directionv2 = 0 m/s since it is at rest before the collisionpi=pfm1v1 + m2v2 = m1v1' + m2v2'substituting in values;0.440 x 3.80 = 0.440v1' + 0.220v2'v1' = 3.80 - v2' ...................(1).
By conservation of kinetic energy, initial kinetic energy is equal to the final kinetic energy;(1/2)m1v1² + (1/2)m2v2² = (1/2)m1v1'² + (1/2)m2v2'²we substitute equation (1) into the second equation and solve for v2' to determine the velocity of ball 2 after the collision(1/2)(0.440)(3.80)² = (1/2)(0.440)(3.80 - v2')² + (1/2)(0.220)v2'²simplifying the equation above;0.83664 = 1.676(v2') - 0.22(v2')²2.199(v2')² - 1.676(v2') + 0.83664 = 0Using the quadratic formula;v2' = 0.70 m/s and v2' = 2.62 m/sSince the mass of ball 2 is less than that of ball 1, v1' should be less than v1 (3.80 m/s).
Therefore the solution with v2' = 0.70 m/s is valid. Thus;Ball 1 moves to the right with velocity;v1' = 3.80 - v2' = 3.80 - 0.70 = 3.10 m/s (east)Ball 2 moves to the right with velocity;v2' = 0.70 m/s (east)Total Kinetic energy after the collision;K.E = (1/2)m1v1'² + (1/2)m2v2'²= (1/2)(0.440)(3.10)² + (1/2)(0.220)(0.70)²= 0.887 JoulesTherefore, the speed of the ball 1 is 3.10 m/s towards east and the speed of ball 2 is 0.70 m/s towards east after the collision. Total kinetic energy after the collision is 0.887 J.
Problem 3Given data;mass of sports car, m1 = 980 kgmass of SUV, m2 = 2300 kgDistance covered before stopping, d = 2.6 mCoefficient of kinetic friction between tires and road, μk = 0.80Initial velocity of the sports car, u = ?Final velocity of the sports car, v = 0 m/s.
As the two cars are moving together before the collision, the initial velocity of the SUV is also zero. Therefore by conservation of momentum,pi = pf(m1u + m2(0)) = (m1 + m2)v0.980 u = 3280 vu = 3280/980u = 3.3469 m/sTherefore the speed of the sports car before the collision is 3.3469 m/s.
Learn more about kinetic energy here,
https://brainly.com/question/8101588
#SPJ11
Write down the formula for the magnetic force on a current carrying wire in both vector form and scalar form. For the scalar form, define each variable in the equation and explain how each of them affect the value of the force on the wire when the others are kept constant.
Vectors and scalars are two types of quantities used in physics and mathematics to describe physical quantities. A scalar is a quantity that has only magnitude, meaning it is described solely by its numerical value. A vector, on the other hand, is a quantity that has both magnitude and direction. In addition to its numerical value, a vector also specifies the direction in which it points.
The formula for the magnetic force on a current-carrying wire in both vector and scalar form are:
Vector form: F = I × B × L sinθ
Scalar form: F = BIL sinθ
Where:
F is the magnetic force in Newtons
I is the current in Amperes
B is the magnetic field in Tesla
L is the length of the wire in meters
θ is the angle between the wire and the magnetic field
The vector form of the formula for magnetic force on a current-carrying wire shows that the magnetic force is perpendicular to both the direction of the current and the direction of the magnetic field. It is given by the cross product of the current, magnetic field, and length of the wire.
For the scalar form of the formula, each variable has the following effects on the value of the magnetic force on the wire when the others are kept constant:
I: When the current increases, the magnetic force increases as well. This is because the magnetic force is directly proportional to the current.
B: When the magnetic field strength increases, the magnetic force increases as well. This is because the magnetic force is directly proportional to the magnetic field strength.
L: When the length of the wire increases, the magnetic force also increases. This is because the magnetic force is directly proportional to the length of the wire.
θ: When the angle between the wire and the magnetic field changes, the magnetic force changes as well. This is because the magnetic force is proportional to the sine of the angle between the wire and the magnetic field.
Learn more about vectors: https://brainly.com/question/2927458
#SPJ11
A disk 8.08 cm in radius rotates at a constant rate of 1 210 rev/min about its central axis. (a) Determine its angular speed. rad/s (b) Determine the tangential speed at a point 2.94 cm from its center. m/s (c) Determine the radial acceleration of a point on the rim. magnitude km/s2 direction ---Select--- (d) Determine the total distance a point on the rim moves in 2.02 s. m
Answer:
a) the angular speed is approximately 7608.47 rad/s.
b) the tangential speed is approximately 223.74 m/s.
c) the magnitude is approximately 468.16 km/s^2.
d) a point on the rim approximately 452.65 meters in 2.02 seconds.
(a) To determine the angular speed of the disk, we can convert the given rotational speed from rev/min to rad/s.
Radius (r) = 8.08 cm = 0.0808 m
Rotational speed = 1210 rev/min
The conversion factor from rev/min to rad/s is 2π, since 2π radians is equivalent to one revolution.
Angular speed (ω) = Rotational speed * 2π
Substituting the values:
ω = 1210 * 2π
Calculating:
ω ≈ 7608.47 rad/s
Therefore, the angular speed of the disk is approximately 7608.47 rad/s.
(b) To determine the tangential speed at a point 2.94 cm from the center of the disk, we can use the formula:
v = ω * r
Where v is the tangential speed, ω is the angular speed, and r is the distance from the center.
Distance from center (r) = 2.94 cm = 0.0294 m
Angular speed (ω) = 7608.47 rad/s
Substituting the values:
v = 7608.47 * 0.0294
Calculating:
v ≈ 223.74 m/s
Therefore, the tangential speed at a point 2.94 cm from the center of the disk is approximately 223.74 m/s.
(c) The radial acceleration of a point on the rim of a rotating disk can be calculated using the formula:
ar = ω^2 * r
Where ar is the radial acceleration, ω is the angular speed, and r is the distance from the center.
Distance from center (r) = 0.0808 m
Angular speed (ω) = 7608.47 rad/s
Substituting the values:
ar = (7608.47)^2 * 0.0808
Calculating:
ar ≈ 468.16 km/s^2 (magnitude)
The direction of the radial acceleration is towards the center of the disk.
Therefore, the magnitude of the radial acceleration of a point on the rim is approximately 468.16 km/s^2.
(d) To determine the total distance a point on the rim moves in 2.02 s, we can use the formula:
Distance = Tangential speed * Time
Tangential speed = 223.74 m/s
Time = 2.02 s
Substituting the values:
Distance = 223.74 * 2.02
Calculating:
Distance ≈ 452.65 m
Therefore, a point on the rim of the disk moves approximately 452.65 meters in 2.02 seconds.
Learn more about angular speed, here
brainly.com/question/6860269
#SPJ11
A traffic light is suspended by three cables. If angle 1 is 32 degrees, angle 2 is 68 degrees, and the mass of the traffic light in 70 kg. What will the tension be in cable T1, T2 \& T3 ?
The tension in cable T1 will be 1200 N, the tension in cable T2 will be 1000 N, and the tension in cable T3 will be 950 N.
To find the tension in each cable, we can use the principles of equilibrium. In this case, the traffic light is suspended by three cables, so the sum of the vertical components of the tension in each cable must equal the weight of the traffic light.
Let's start with cable T1. Since angle 1 is given as 32 degrees, the vertical component of the tension in T1 can be found by using the equation T1 * sin(angle 1) = weight. Plugging in the known values, we get T1 * sin(32) = 70 * 9.8. Solving for T1, we find T1 = (70 * 9.8) / sin(32) ≈ 1200 N.
Moving on to cable T2, angle 2 is given as 68 degrees. Using the same equation as before, T2 * sin(angle 2) = weight, we have T2 * sin(68) = 70 * 9.8. Solving for T2, we get T2 = (70 * 9.8) / sin(68) ≈ 1000 N.
Finally, for cable T3, we need to find the horizontal component of the tension in T1 and T2. The horizontal component of T1 can be calculated as T1 * cos(angle 1), which is T1 * cos(32). Similarly, the horizontal component of T2 is T2 * cos(angle 2), or T2 * cos(68). The sum of these horizontal components must equal zero for equilibrium, so T3 = - (T1 * cos(32) + T2 * cos(68)). Plugging in the known values, we find T3 ≈ - (1200 * cos(32) + 1000 * cos(68)) ≈ 950 N.
Therefore, the tension in cable T1 is 1200 N, the tension in cable T2 is 1000 N, and the tension in cable T3 is 950 N.
Learn more about equilibrium here:
https://brainly.com/question/28899790
#SPJ11