d = v·t + (1/2)·a·t^2
a = 10m/s^2. t = 10s
v = 0m/s. Initial velocity
d = 0·10 + 10/2 · 10^2 = 0 +5·100
d = 500m
what’s 12cm in kilometers
4. Shirley Bored sits in her seat in the English classroom. The force of gravity on Earth pulls
down on Shirley's body with 600 N of force. What is the direction and size of the reaction
force acting on Shirley?
Answer:
600 N upward
Explanation:
According to Newton's third law, for every action their is an equal and opposite reaction. The equal and opposite reaction to a downward force of magnitude 600 N is an upward force of magnitude 600 N
If a material were being designed to demonstrate no thermal expansions, how would the energy plot look like?
The characteristics of thermal expansion allow finding that the response for a material without thermal expansion is
The length variation is zero In the graph the line is horizontal so there is no change in length with temperature
Thermal expansion is the macroscopic sum of the changes in the length of the bonds when the energy (temperature) changes, it can be written
ΔL = α L₀ ΔT
Where ΔL is the change in length, α the coefficient of linear expansion, L₀ the initial length and ΔT the change in body temperature
In this case, a material is being designed that the thermal expansion is very small, for this the material must be made up of several compounds where some of them present a contraction with temperature, some examples: water at low temperature, liquefied gases , ceramic tile, quartz, etc.
The thermal expansion measurement processes control the body temperature and measure the change in length, in this case the change in length must be zero, in the attachment we can see a graph of a composite material with these characteristics, an example of this type of material is Invar an alloy of nickel and iron α = 3.7 10⁻⁶ ºC⁻¹
In conclusion, using the characteristics of thermal expansion we can find that the response of material without thermal expansion is
The length variation is zero In the graph the line is horizontal so there is no change in length with temperature
Learn more here: brainly.com/question/18717902
What happens if hair has static electricity
Answer:
it goes up
Explanation:
A 8 kg brick is sitting on a frictionless table. If a 60 N horizontal force is applied to the brick and it accelerates at 2 m/s2, what will be the force of friction
a.24
b.44
c.0
d.600
What is the Validity measures of a basketball bouncing
This study was aimed at testing the construct validity of the basketball basic motion skills test instrument (ITK GDBB). The research used descriptive method of 3 basketball experts in the city of Cimahi; 3 experts are the expert in basketball. The instrument used was the ITB GDBB developed by Silvy (2019) consisting of top passing, bottom passing, top service, bottom service, chest passing, bounding passing, overhead passing, and leading ball (dribbling). This instrument consists of 76 items that cover 4 domains in basketball, namely chest pass, overhead pass, bound pass, and dribbling. The validity method used the construct validity of different power types. For the reliability method, it used the Kuder Ricardson (KR) and Objectivity analysis. The results of the construct validity analysis of a total of 76 items show that the score is ranged from 0.67 to 1.00. The construct validity value of 71 items in the basketball game is in the high category (= 1.00), 5 items are in the sufficient category, the relativity score is ranged from 0.75 to 0.98, and the objectivity score is ranged from 0.89 to 0.95. The conclusion is that this test instrument can be used as a standardized basic motion skill test for standardized large ball games for validity in basic motion skills in basketball games for grade VII junior high school students.
Chọn câu sai :
A. Đồ thị vận tốc theo thời gian chuyển động thẳng đều là một đường song song với trục hoành Ot
B. Trong chuyển động thẳng đều ,đồ thị theo thời gian của tọa độ và của vận tốc đều là những đường thẳng
C. Đồ thị toạ độ theo thời gian của chuyển động thẳng đều bao giờ cũng là một đường thẳng
D. Đồ thị toạ độ theo thời gian của chuyển động thẳng đều là một đường thẳng xiên góc
P.s this language is: Viatnamese :)
Answer:
This is just to help the other readers help you. Or so that you understand:
Đây là để giúp bạn đọc giúp bạn!
What they tried to say:
Choose the wrong sentence:
A. The velocity-time graph of uniform linear motion is a line parallel to the horizontal axis Ot
B. In uniform linear motion, the time graphs of the coordinates and of the velocity are both straight lines
C. The time-coordinate graph of uniform rectilinear motion is always a straight line
D. The coordinate-time graph of uniform linear motion is an oblique line
Is what they asked you.
Thankyou and your welcome
Vì tôi đã giúp đỡ, tôi có thể vui lòng có cám ơn nào không?
Have a great day!
~Happy helper~
the density of free electron in a copper conductor is 8.5×10^28m-3. how long does an electron take to dift from one end of a wire 3.0m long to it's other end?
Answer:
missing information what is your cross-section and current in Amperes
Kinetic and Potential energy
The main difference between potential and kinetic energy is that one is the energy of what can be and one is the energy of what is. In other words, potential energy is stationary, with stored energy to be released; kinetic energy is energy in motion, actively using energy for movement.
A student practicing for a track meet ran 3500 m in 500 s. What was her average speed? a. 4,000 m/s b. 0.14 m/s c. 7 m/s d. 1,750, 000 m/s
Answer:
c. 7 m/s
Explanation:
3500 m / 500 s = 7 m/s
Describe the role of oceans in the water cycle‽
Answer:
The ocean plays a key role in this vital cycle of water. The ocean holds 97% of the total water on the planet; 78% of global precipitation occurs over the ocean, and it is the source of 86% of global evaporation. ... Water evaporates from the surface of the ocean, mostly in warm, cloud-free subtropical seas.
Explanation:
Hope this helps.
When you view the pendulum’s swing, it shows that at the very top of the swing KE = 0. What does that tell you about the pendulum’s motion at that point?
it tells you that it has a lot of force
Answer:
Since I couldn't find the other answers to the same question, I wrote the wrong answer to help ya'll get the sample response. So here's from Edge
Explanation:
Sample Response: If KE = 0, the pendulum is not moving. At the top of the swing, the pendulum must stop for a brief moment.
HELP me please !!!!
on earth what is the weight of a large screen tv thas has amass of 75 kg
Answer:
Explanation:
F = mg
F = 75(9.8)
F = 735 N
What force prevents a machine from having 100% efficiency? A. Magnetic B. Electric O C. Friction O D. Gravity
Answer:
I believe it would be C ? my apologies if I'm wrong.
A block of mass 2.52 kg is kept at rest
as it compresses a horizontal massless spring
(k 116 N/m) by 9.73 cm. As the block
is released, it travels 0.537 m on a rough
horizontal surface before stopping.
The acceleration of gravity is 9.8 m/s.
Calculate the coefficient of kinetic friction
between surface and block.
By Newton's second law, the net vertical force on the block is
∑ F = N - mg = 0
so that the normal force exerted by the surface has magnitude
N = mg = (2.52 kg) (9.80 m/s²) = 24.7 N
Then as the block slides over the surface, it feels a frictional force of
f = µ (24.7 N)
where µ is the coefficient of kinetic friction.
As the block is pushed by the spring to its equilibrium position, friction performs
µ (-24.7 N) (0.0973 m) = -2.40µ J
of work (which is negative because it opposes the block's motion).
In compressing the spring by 9.73 cm = 0.0973 m, we store
1/2 (116 N/m) (0.0973 m)² = 0.549 J
of energy. This energy is released and partially converted to kinetic energy, while the rest is lost to friction.
By the work-energy theorem, the total work performed on the block as the spring pushes it towards the equilibrium position is equal to the change in its kinetic energy:
W = ∆K
0.549 J - 2.40µ J = 1/2 (2.52 kg) v ² - 0
where v is the speed of the block at the equilibrium position. Solving for v, we get
v = 0.891 √(0.549 - 2.40µ) m/s
After the block is released, the only force acting on it as it slides freely is friction. It comes to a stop after 0.537 m, so that friction performs
µ (-24.7 N) (0.537 m) = -13.3µ J
of work.
Using the work-energy theorem again, we have
W = ∆K
-13.3µ J = 0 - 1/2 (2.52 kg) v ²
Substitute the velocity we found in terms of µ, and solve for µ :
-13.3µ J = -1/2 (2.52 kg) (0.891 √(0.549 - 2.40µ) m/s)²
===> µ = 0.0350
when the frequency of a wave decreases the what increases
Answer:
The wavelength
Explanation:
As the frequency decreases, the wavelength gets longer.
HELP PLEASEE !!!! HELP FAST
Answer:
I'd say 2) "Genes are instructions that cells use to create proteins." Because it's more specific, and that's essentially what it's for.
Answer:
2.
Explanation:
because genes don't create proteins. proteins come from what we take as food.
Which area of astronomy does Kepler's laws address? (1 point)
A. The movement of asteroids in the solar system
B. The movement of the sun in relation to the planets.
C. The movement of planets within the solar system.
D. The movement of stars within galaxies.
Answer:
B
Explanation:
His law describes the orbits of planets around the Sun.
The area of astronomy that Kepler's laws address is the movement of planets within the solar system. The correct option is C.
What is Kepler's law?According to Kepler's first law, "all the planets revolve in elliptical orbits around the sun, with the sun at one of the foci."
Perihelion is the point at which the planet is closest to the sun, and aphelion is the point at which the planet is farthest from the sun.
Kepler's laws of planetary motion, published between 1609 and 1619 by Johannes Kepler, describe the orbits of planets around the Sun.
Kepler's laws of planetary motion represent a watershed moment in the transition from geocentrism to heliocentrism. They establish the first quantitative link between the planets, including Earth.
Thus, the correct option is C.
For more details regarding Kepler's law, visit:
https://brainly.com/question/1608361
#SPJ2
You are driving to grandma's house, and you are traveling at an average of 70 mph. How long will it take you to travel 70 miles?
O 1 hour
O 1 second
70 hours
O 70 seconds
Answer: 1 hour
Explanation: Focus on the units; 70 miles per hour means that each hour, you will travel 70 miles
or you can use the equation time = distance/speed. You have 70miles/ 70mph = 1hour
PLz help Asap 10 POINT
I MIGHT GIVE BRAINLIST IF RIGHT AND IF I CAN.
Answer:
Mars has a thin atmosphere
Explanation:
Okay, so this is going to sound crazy but bare with me. Mar's atmosphere is thin. There is little to no gravitational pull for the atmosphere to stay. Also, no, humans will not be able to live on Mars because the atmosphere, quite literally, contains 1% oxygen. Hopefully this helps! Earth's is thick because of the gravitational pull and gases in Earth's surface.
Will mark brainliest help last question
Answer:
b
the def of convection is : process by which heat is transferred by movement of a heated fluid such as air or water
therefore c and d are wrong.
Explanation:
Describe the relationship between temperature and kinetic
energy.
Answer:
temperatures is directly proportional to kinetic energy
Explanation:
in increasing the temperature,kinetic energy also increases
hope it helps...
in the free body diagram. what is the net force?
A) 40 N, right
B) 10 N, right
C) 80 N
D) 32 N, right
Answer:
None of the suggested solutions.
Explanation:
horizontally, net force is
60cos30 - 20 = 31.96... 32 N right
which might be their desired answer.
There is also a vertical net force component.
vertically, net force is 40 + 60sin30 - 40 = 30 N up
total net force is
√(32² + 30²) = 43.834... 44 N
θ = arctan(30/32) = 43° above horizontal right.
How much force (in Newtons) is needed to accelerate a 160 kg object at a rate of 4 m/s2?
A. 15
B. 40
C. 640
D. .025
Answer:
C. 640
Explanation:
The minimum force would occur in a frictionless environment and act parallel to any abutting surface.
F = ma = 160(4) = 640 N
The weight of an object is 180 N at a distance of 150 km above a planet's center. What is the weight of the object when it moves 450 km above the center of the planet?
By using Newton law of gravitation, the weight of the object when it moves 450 km above the center of the planet is 20N
Given that the weight of an object is 180 N at a distance of 150 km above a planet's center.
F = GMm/[tex]r^{2}[/tex]
F = mg = 180N
r = 150
When it moves 450 km above the center of the planet, G, M and m will be constant. only r will vary.
180 = GMm/[tex]150^{2}[/tex]
Make GMm the subject of the formula
GMm = 180 x 22500
GMm = 4050000
As it moves 450 km above the center of the planet, Its weight will be
F = GMm/[tex]r^{2}[/tex]
Substitute all the values and parameters
F = 4050000/[tex]450^{2}[/tex]
F = 20 N
Therefore, the weight of the object When it moves 450 km above the center of the planet is 20 Newtons
Learn more here: https://brainly.com/question/22412075
Which area of study involves how mechanics and motion affect sports performance?
1.) Momentum. 2.) Velocity. 3.) Biomechanics. 4. )Centripetal force.
Answer:
biomechanics
Explanation:
Biomechanics is part of the larger field of kinesiology, specifically focusing on the mechanics of the movement. 1 It is both a basic and applied science, encompassing research and practical use of its findings.
the weight on each foot of an elephant 500n. what will be the contact force
Answer:
The weight of an object is the force it exerts due to gravity. Pressure is force per unit area, or force divided by area over which the pressure is exerted.
Explanation:
1. For Jo:
1. For Jo:force = 500 N
1. For Jo:force = 500 Narea = 0.0001 m^2
1. For Jo:force = 500 Narea = 0.0001 m^2pressure = F/A = 500N/0.0001m^2 = 5,000,000 N/m^2
A hunter is practicing hitting a target that is down range. If the arrow leaves the bow at a
velocity of 26 m/s at an angle of 40 degrees above the horizontal,
a. Calculate how much time it takes for the arrow to return to the bow level.
b. Find out how far down range the arrow goes.
c. What is the maximum altitude the arrow reaches?
Answer:
What kind of bow Is he using
The image shows a dam.
A large dam has point X behind it where the water level is high and point Y below it to, which the water flows.
Which descriptions best fit the labels?
X: kinetic energy
Y: potential energy
X: potential energy
Y: kinetic energy
X: mechanical energy
Y: electrical energy
X: electrical energy
Y: mechanical energy
Answer:
The Correct answer is B on Edge
Explanation:
I did the quiz! :)