This process involves sound waves that propagate through the material, making it behave like a fluid. The process described in the question is known as liquefaction.
which is the process by which solid soil or rock is transformed into a liquid-like state due to changes in pressure, stress, or other factors.
The term liquefaction is commonly used in the fields of geology, engineering, and materials science, and it refers to a wide range of phenomena in which solid materials become fluid-like due to the application of external forces.
In the case of long-runout debris flows, the jostling back and forth of fragments in the flow creates sound waves that cause the material to behave like a fluid, allowing it to travel long distances.
For more such questions on liquefaction
brainly.com/question/4067457
#SPJ11
how is a flywheel constructed to maximize its rotational inertia? how is a flywheel constructed to maximize its rotational inertia? most of the mass is concentrated near a ring half way between the axis and the rim. most of the mass is concentrated near the axis. the mass is uniformly distributed across the radius of the disk. most of the mass is concentrated far from the axis.
To maximize its rotational inertia, a flywheel must be constructed in a way that "most of the mass is concentrated far from the axis."
Rotational inertia is the measure of a rotating object's resistance to change in its state of rotation. It is affected by the distribution of mass of the object, specifically the distance of the mass from the axis of rotation.
A flywheel is a mechanical device used to store rotational energy. To maximize the flywheel's rotational inertia, the mass of the flywheel should be concentrated as far away from the axis of rotation as possible. This is because the farther the mass is from the axis, the greater its effect on the flywheel's rotational inertia. Therefore, the correct answer to the question is "most of the mass is concentrated far from the axis."
A flywheel is constructed to maximize its rotational inertia by concentrating most of the mass far from the axis. This distribution of mass increases the flywheel's resistance to changes in rotational speed, enhancing its ability to store and release energy efficiently.
Learn more about Rotational inertia here: https://brainly.com/question/29652198
#SPJ11
A 9-1-1 operator needs to have
advanced knowledge in which area in
order to properly do their job?
A. geography
C. mathematics
B. economics
D. history
Answer:
B. economics
Explanation:
An understanding of economic principles can help a 911 operator understand the root causes of many different emergencies, such as poverty, drug abuse, and domestic violence, and help them be more effective at dispatching resources to help those in need. Furthermore, a basic understanding of economics can provide context for some types of emergencies, such as natural disasters or workplace accidents related to unsafe working conditions. However, while having an understanding of economics is helpful, it's not mandatory for 911 operators to perform their jobs effectively. They ultimately need to be skilled in communication, risk assessment, and decision-making to ensure that people receive the assistance and resources they need in an emergency situation.
an object placed 12 cm from a concave mirror produces a real image 8.0 cm from the mirror. if the object is now moved to a new position 18.0 cm from the mirror, where is the new image located as measured from the mirror?
The new image is located at a measure of 7.5 cm from the mirror.
Using the mirror formula, 1/f = 1/do + 1/di, where f is the focal length, do is the object distance and di is the image distance.
Let's first find the focal length of the concave mirror. We can use the mirror formula with the given values of object distance and image distance:
[tex]1/f = 1/do + 1/di\\1/f = 1/0.12 + 1/0.08\\1/f = 8.33 + 12.5\\f = 1/20.83\\f = 0.048 m[/tex]
Now we can use the mirror formula again to find the new image distance when the object distance is 18.0 cm:
[tex]1/f = 1/do + 1/di\\1/0.048 = 1/0.18 + 1/di\\di = 0.048 * 0.18 / (0.18 - 0.048)\\di = 0.009936 / 0.132\\di = 0.075 m[/tex]
Therefore, the new image is located at almost 7.5 cm away from the mirror.
To know more about mirror formula, here
brainly.com/question/8512677
#SPJ4
Using your answers from parts C and D, revise your design to make your model building more resistant to earthquakes. Draw your revised design.
Foundation: Use a deep and sturdy foundation that extends below the frost line and is anchored to bedrock. Consider foundations or caissons, which can better withstand lateral forces during an earthquake.
Structural System: Utilize a seismic-resistant structural system such as reinforced concrete or steel framing with appropriate bracing and cross-bracing configurations. Consider incorporating a moment-resisting frame or a shear wall system, which can provide enhanced lateral stability during seismic events.
Dampers and Isolators: Include seismic dampers or isolators in the structural system to absorb or dissipate seismic energy. These can be installed at various locations, such as between floors or in the foundation, to reduce the impact of seismic forces on the building.
Diaphragms: Strengthen diaphragms, which are horizontal structural elements such as floors and roofs, to improve their resistance to lateral loads during an earthquake. Consider using diaphragms made of materials such as cross-laminated timber (CLT) or steel decking, which can provide additional stiffness and strength.
Learn more about earthquake here
https://brainly.com/question/29500066
#SPJ4
a 1.5-m length of straight wire experiences a maximum force of 1.4 n when in a uniform magnetic field that is 1.8 t. 1) what current must be passing through it? (express your answer to two significant figures.)
The current passing through a 1.5-m length of straight wire that experiences a maximum force of 1.4 N in a uniform magnetic field of 1.8 T is 0.52 A.
Use the formula for magnetic force on a current-carrying wire:
F = BIL
where F is the magnetic force (1.4 N), B is the magnetic field strength (1.8 T), I is current, and L is the length of the wire (1.5 m).
I = F / (B * L)
I = 1.4 N / (1.8 T * 1.5 m)
I = 1.4 / 2.7 = 0.5185185 A
I ≈ 0.52 A
Therefore, a current of 0.52 A must be passing through the wire.
To know more about magnetic force click here:
https://brainly.com/question/3160109
#SPJ11
which of the following best describes how a homeowner using an off-the-grid pv solar system, in the same country as seen in the graph above, can power a home between 9:00 pm and 6:00 am? responses switching to the electrical grid to obtain power switching to the electrical grid to obtain power relying on sources like wind or hydroelectricity in times of darkness relying on sources like wind or hydroelectricity in times of darkness using excess energy from a sunny day stored in batteries for power using excess energy from a sunny day stored in batteries for power burning wood to create heat and light for the home.
Using excess energy from a sunny day stored in batteries is the best option for off-the-grid PV solar systems at night.
Based on the information given, the best option for a homeowner using an off-the-grid PV solar system to power a home between 9:00 pm and 6:00 am would be to use excess energy from a sunny day stored in batteries for power. This means that the solar panels would generate excess energy during the day which would be stored in batteries to be used at night. This is common practice in off-the-grid solar systems and is an effective way to ensure consistent power supply. Switching to the electrical grid or relying on other sources of energy like wind or hydroelectricity would not be feasible for an off-the-grid solar system. Burning wood for heat and light could be an option but it would not be directly related to the solar system.
Learn more about pv solar here:
https://brainly.com/question/29548184
#SPJ4
37.37.) pulsars a) spin very rapidly when they're young but slow down due to emitting radiation. b) are the cause of gamma-ray bursts. c) spin very slowly when they're young, and gradually spin faster as they age. d) generally form from 25 solar mass stars. e) emit radio radio in all directions
Pulsars spin very rapidly when they're young but slow down due to emitting radiation. The correct answer is option a.
What are pulsars?Pulsars are highly magnetized, rotating neutron stars that emit beams of electromagnetic radiation out of their magnetic poles. These beams can only be observed when they are oriented toward the observer, causing them to appear as pulses of radiation at regular intervals.
Pulsars were first observed in 1967 by Jocelyn Bell Burnell and Antony Hewish while studying interplanetary scintillation. Since their discovery, over 2,000 pulsars have been observed. Pulsars spin very rapidly, with some pulsars rotating hundreds of times per second.
They generally spin faster when they are young and slow down over time due to emitting radiation. Pulsars generally form from massive stars that have gone supernova. They emit radiation in a variety of wavelengths, including radio waves, X-rays, and gamma rays.
Therefore, Pulsars are known to spin very rapidly, with some rotating hundreds of times per second and they gradually slow down due to the loss of energy in the form of radiation.
To know more about Pulsars click here:
https://brainly.com/question/28271936
#SPJ11
stand a meterstick on its end and let it rotate to the floor. if you attach a heavy glob of clay to its upper end and repeat, the time to fall will be
When you stand a meterstick on its end and let it rotate to the floor, the time it takes to fall is dependent on the moment of inertia.
If you attach a heavy glob of clay to its upper end and repeat the experiment, the time it takes to fall will be longer. The moment of inertia is defined as the resistance of an object to rotational motion. It is dependent on the shape and mass distribution of an object. The clay's addition to the meterstick's upper end changes the mass distribution of the object and increases its moment of inertia. As a result, the object will take longer to fall because it has more resistance to rotational motion.
In summary, the time it takes for a meterstick to fall is dependent on its moment of inertia. Adding a heavy glob of clay to its upper end increases the moment of inertia, resulting in a longer time for it to fall.
Know more about moment of inertia. here:
https://brainly.com/question/14460640
#SPJ11
if you could count stars at a rate of about one per second, how long would it take to count all the stars in the milky way galaxy? group of answer choices several thousand years several years several days several weeks
If you could count stars at a rate of about one per second, it would take several thousand years to count all the stars in the Milky Way galaxy.
The Milky Way galaxy contains approximately 100 billion to 400 billion stars. In order to estimate the time it would take to count all the stars, let's assume the average number of stars, which is around 250 billion.
1. First, determine the number of seconds in a minute: 60 seconds
2. Next, determine the number of seconds in an hour: 60 minutes * 60 seconds = 3,600 seconds
3. Determine the number of seconds in a day: 24 hours * 3,600 seconds = 86,400 seconds
4. Determine the number of seconds in a year: 365 days * 86,400 seconds = 31,536,000 seconds
Now, divide the total number of stars (250 billion) by the number of seconds in a year:
250,000,000,000 stars / 31,536,000 seconds per year ≈ 7,926 years
So, it would take approximately 7,926 years to count all the stars in the Milky Way galaxy at a rate of one star per second. Therefore, the correct answer from the group of choices is several thousand years.
Know more about Milky Way galaxy here:
https://brainly.com/question/2905713
#SPJ11
a table tennis ball has a diameter of 3.80 cm and average density of 0.084 0 g/cm3. What force is required to hold ir completely submerged under water?
The amount of force necessary to keep it submerged in water is F=0.258N.
The force required to hold a table tennis ball submerged in water is calculated using the formula:
[tex]F =\frac{ (\rho * V * g) }{ A}[/tex]
Where F is the force, ρ is the water's density, V is the ball's volume, g is its gravitational acceleration, and A is its cross-sectional area.
The following formula is used to determine the ball's volume:
[tex]V = \frac{4}{3}*pi*r^3[/tex]
where r is the ball's radius.
The radius of the ball is half its diameter, thus:
[tex]r = 3.8 cm^2[/tex]
Therefore,
[tex]V = \frac{4}{3}*pi *(3.8 cm ^2)3\\V = 0.5222 cm3[/tex]
The cross-sectional area of the ball is calculated using the formula:
[tex]A = \pi * r^2\\\\A = \pi* (\frac{3.8 cm }{ 2})^2\\A = 4.5257 cm^2[/tex]
Substituting the values in the above formula,
[tex]F =\frac{ (0.084 g/cm^3 * 0.5222 cm^3 * 9.8 m/s^2) }{4.5257 cm^2}\\F = 0.258 N[/tex]
Hence, the force needed to keep it submerged in water is 0.258N
learn more about force refer:brainly.com/question/30526425
#SPJ1
we have 100.0 kg of skim milk at 0% fat and 2.5% protein. how many kg of milk at 2.0% fat and 2.1% protein, and whole milk at 3.5% fat and 1.9% protein must be added to the skim milk to get a final milk that is 1.6% fat and 2.2% protein?
We have 100.0 kg of skim milk at 0% fat and 2.5% protein. approximately 298.48 kg of milk A and 200.05 kg of whole milk B should be added to the skim milk to get the desired final mixture.
Let x kg of milk with 2.0% fat and 2.1% protein (Milk A) be added to the skim milk. Let y kg of whole milk with 3.5% fat and 1.9% protein (Milk B) be added. We need to find x and y for the final mixture.
1. Fat content equation:
(0.00 * 100) + (0.02 * x) + (0.035 * y) = 0.016 * (100 + x + y)
2. Protein content equation:
(0.025 * 100) + (0.021 * x) + (0.019 * y) = 0.022 * (100 + x + y)
Step 1: Solve the fat content equation for y:
0.02 * x + 0.035 * y = 1.6 + 0.016 * x + 0.016 * y
0.019 * x + 0.02 * y = 1.6
y = (1.6 - 0.019 * x) / 0.02
Step 2: Substitute the value of y in the protein content equation:
0.025 * 100 + 0.021 * x + 0.019 * (1.6 - 0.019 * x) / 0.02 = 0.022 * (100 + x)
2.5 + 0.021 * x + 0.019 * (1.6 - 0.019 * x) = 2.2 + 0.022 * x
Step 3: Solve for x:
0.021 * x - 0.022 * x = 2.5 - 2.2 - 0.019 * 1.6 / 0.02
-0.001 * x = 0.3 - 0.00152
x = (0.3 - 0.00152) / -0.001
x ≈ 298.48
Step 4: Calculate y using the value of x:
y = (1.6 - 0.019 * 298.48) / 0.02
y ≈ 200.05
For more such questions on final mixture.
brainly.com/question/2803514
#SPJ11
An uncharged 1.0-µf capacitor is connected in series with a resistor, an ideal battery, and an open switch. what is the voltage across the capacitor 11 ms after closing the switch?
The voltage across the capacitor 11 ms after closing the switch is 11 ms.
To solve this problem, we will use the time constant (τ) of the RC circuit, which is given by the product of the resistance (R) and the capacitance (C):
τ = RC
Since the capacitor is initially uncharged, the voltage across it (Vc) at time t is given by:
Vc = V0(1 - e^(-t/τ))
Where V0 is the voltage of the battery.
At time t = 11 ms, the switch is closed, and the capacitor begins to charge. We are asked to find the voltage across the capacitor at this time.
Since the switch is closed, the resistor is in the circuit, and we need to know its value to calculate the time constant.
However, we are not given the value of the resistor, so we cannot solve the problem with the information given.
We need either the value of the resistor or the time constant to calculate the voltage across the capacitor at 11 ms.
For such more question on voltage:
https://brainly.com/question/1176850
#SPJ11
Determine how much current will pass through resistance R1 if U(BC)=6V, R1=2 ohms, R2=6 ohms, R3=1 ohm, R4=1 ohm
The current that will pass through resistance R1 if U(BC) = 6V,is 3A when the resistances are as follows: R1=2 ohms, R2=6 ohms, R3=1 ohm, R4=1 ohm.
Given the voltage in the circuit (V) = 6V
The resistance of resistor R1 = 2ohms
The resistance of resistor R2 = 6ohms
The resistance of resistor R3 = 1ohms
The resistance of resistor R4 = 1ohms
As we can see from the diagram given that the resistors R1 and R4 are connected in parallel, which combinedly is connected in series with R2 and then total is connected in parallel with R3.
The current that will pass through resistance R1 can be determined by using Ohm's Law. This law states that the current (I) is equal to the voltage (V) divided by the resistance (R). In this case, the voltage across R1 is the same as the voltage across the circuit (U(BC)), which is 6V. Therefore, the current through R1 is:
I = 6V / 2 ohms = 3A
To learn more about current click here https://brainly.com/question/23323183
#SPJ1
the force that is exerted by a magnet as it picks up iron nails could be best described as group of answer choices the magnetic force exerted by ions moving within the magnet on electrons moving within the nails. the electric force exerted by electrons in the magnet, on electrons in the nails. the magnetic force exerted by electrons moving within the magnet, on electrons moving within the nails. the force of attraction between the nuclei of atoms in the magnet and the nuclei of atoms in the nails. the electric force exerted by ions in the magnet on electrons in the nails.
The force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails. Option A right choice.
The force of attraction between the magnet and the iron nail is as a result of the magnetic field that surrounds the magnet, the iron nail is then drawn toward the magnet. This force is known as the magnetic force and it can either attract or repel objects that are magnetic.
Magnets have two poles, the North Pole and the South Pole, the magnetic field always flows from the North Pole to the South Pole, and therefore when an iron nail is placed within the magnetic field, the magnetic force pulls it towards the magnet.
The reason the force that the magnet exerts is best described as magnetic is that it is a result of the magnetic field that surrounds the magnet. Magnetic forces do not involve electrons or ions, rather, they involve the movement of the magnetic field around the magnet, which exerts a force on any magnetic object that is placed within the field.
Therefore, the force that is exerted by a magnet as it picks up iron nails could best be described as the magnetic force exerted by electrons moving within the magnet on electrons moving within the nails.
So, Option A is right choice.
For similar question on magnetic force
https://brainly.com/question/13277365
#SPJ11
Question:-
the force that is exerted by a magnet as it picks up iron nails could be best described as
A. the magnetic force exerted by ions moving within the magnet on electrons moving within the nails.
B. the electric force exerted by electrons in the magnet, on electrons in the nails.
C. the magnetic force exerted by electrons moving within the magnet, on electrons moving within the nails.
D. the force of attraction between the nuclei of atoms in the magnet and the nuclei of atoms in the nails.
E. the electric force exerted by ions in the magnet on electrons in the nails.
1)A student observes an ant travelling at 1 cm/s. At the time of 1:02:32 pm the ant is at the 5.0 cm position on the meter stick. Where on the meter stick will the ant be at 1:03:10 pm?
Answer:
The time interval between 1:02:32 pm and 1:03:10 pm is 38 seconds. During this time interval, the ant travels at a speed of 1 cm/s, so it will travel a distance of:
distance = speed x time
distance = 1 cm/s x 38 s
distance = 38 cm
Starting at the 5.0 cm position on the meter stick, the ant will travel 38 cm in 38 seconds, ending up at:
5.0 cm + 38 cm = 43.0 cm
Therefore, the ant will be at the 43.0 cm position on the meter stick at 1:03:10 pm.
Answer:
43.0 cm
Explanation:
The ant is traveling at a speed of 1 cm/s. At 1:02:32 pm, the ant is at the 5.0 cm position on the meter stick. The time difference between 1:02:32 pm and 1:03:10 pm is 38 seconds. Since the ant is traveling at a speed of 1 cm/s, in 38 seconds it will have traveled a distance of 38 cm. Therefore, at 1:03:10 pm, the ant will be at the position of 5.0 + 38 = 43.0 cm on the meter stick.
for a star with the mass and size of our sun and having a planet with six times the mass of jupiter, where would the center of mass of this system be located, relative to the center of the star, if the distance from the star to the planet was the same as the distance from jupiter to our sun?
The center of mass for this star-planet system would be located approximately 0.021 AU from the center of the star.
To find the center of mass of the star-planet system, we will use the following formula:
Center of mass = (m1 * r1 + m2 * r2) / (m1 + m2)
Here, m1 and r1 are the mass and distance of the star from the reference point (center of mass), and m2 and r2 are the mass and distance of the planet.
The mass of the star (our Sun) is 1 solar mass, and the mass of the planet is 6 times the mass of Jupiter, which is about 0.018 solar masses. The distance from the star to the planet is the same as the distance from Jupiter to our Sun, which is 5.2 AU.
Using the formula:
Center of mass = (1 * r1 + 0.018 * 5.2) / (1 + 0.018)
Solving for r1, we get:
r1 ≈ 0.021 AU
So, the center of mass is approximately 0.021 AU from the center of the star.
To know more about center of mass click on below link:
https://brainly.com/question/29576405#
#SPJ11
How many molecules are in 5 moles of O2?
Answer:
One mole of O2 contains 6.022 x 10^23 molecules, therefore, 5 moles of O2 contain 3.011 x 10^24 molecules.
Explanation:
how would you expect the solar system and its bodies to be different if the frost line had been beyond the orbit of jupiter?
If the frost line had extended beyond Jupiter's orbit, the solar system and its components would have been very different. The frost line is the distance in the solar system.
where water and other volatile substances may condense into solid ice, and it is important in planet formation.The outer solar system's gas giants would not have grown as rapidly or as large as they did if there had been a frost line beyond Jupiter. This is because the absence of volatile chemicals in the outer areas would have delayed the process. Furthermore, because they developed closer to the frost line, the inner rocky planets, including Earth, would have had more water and volatile chemicals.a frost line beyond Jupiter would have had profound effects on the formation and composition of the solar system's planets and bodies.
learn more about solar system here:
https://brainly.com/question/12075871
#SPJ4
a bowling ball weighing 57.5 n initially moves at a speed of 4.30 m/s. how long must a force of 44.0 n be applied to the ball to stop it?
Answer:t = 1.27 s
Explanation:
Given
Initial velocity(vi)=4.30m/s
final velocity(vf)=0
F = 44.0 N
M=57.5/9.8(considering g=9.8)
vf = vi + (Fnet / m) * t
t = (m * (vf - vi)) / Fnet
Substituting the given values, we get:
t = (57.5 N / 9.81 m/s^2) * (0 - 4.30 m/s) / (-44.0 N)
t = 1.27 s
A force of 44.0 N must be applied to the bowling ball for 6.98 seconds to stop it.
To determine how long a force of 44.0 N must be applied to a 57.5 N bowling ball moving at an initial velocity of 4.30 m/s to stop it, we can use the formula for the final velocity of an object subjected to a constant force:
final velocity = initial velocity + (force/mass) x time
Since we want to stop the ball, final velocity is 0. We can rearrange formula to solve for time:
time = (mass x (final velocity - initial velocity))/force
Substituting in given values, we get:
time = (57.5 kg x (0 m/s - 4.30 m/s))/44.0 N = 6.98 seconds
To know more about initial velocity, here
brainly.com/question/9365999
#SPJ4
pls help me with this question I need it by Monday thanks Q3-4
The circuit voltages and currents are evaluated according to Ohm's law as follows;
a. 220 V
b. Please find attached the drawing of the circuit showing the required location of the switch, created with MS Word
c. i. 0.4 A
ii. The total current will remain the same
4. a. The over-voltage could burn the lamps
b. i. 6
ii. Please find attached the drawing of the circuit diagram created with MS Word
iii. Please find attached the drawing of the voltmeter in the circuit
5. a. 7 V
b. i. The voltage decreases in L1
ii. The current in the circuit is reduced by the addition of the new lamp
What is Ohm's Law?Ohm's law describe the relationship between the voltage, resistance, and current in an electric circuit. Ohm's Law states that the current, I, between two points in a conductor in a current carrying circuit, is directly proportional to the voltage, V, between the points.
Mathematically; V ∝ I
V = I·R
R = The resistance of the conductor
3. a. The arrangement of the lamps in parallel indicates that the voltage of the mains 220 V is the voltage across one of the lamps.
b. The location of the switch should be adjacent to the voltage source. Please see the attached drawing created with MS Word
c. i. The connection of the lamps in parallel, and the equivalence of the resistors in each lamp indicates that the current, I, flowing through each lamp can be obtained as follows;
I = 2.4 A/6 = 0.4 A
ii. When the two more lamps are added in parallel, the current through each lamp reduces while the total current in the circuit remain the same
4. a. The reason why Marcus cannot connect the lamps in parallel across the battery is because the voltage of each lamp (2.0 V) are lesser than the voltage of the battery (12 V). If the lamps are connected in parallel, they will draw excess current from the battery and they could burn out.
b. i The number of lamps that can be connected in series and work properly is; 12 V/(2 V/lamp) = 6 Lamps
ii. Please find attached the drawing of the lamps arranged in series created with MS Word
iii. Please find attached the drawing of the voltmeter, that can be used to measure the voltmeter across one lamp
5. a. The voltage across the buzzer is the difference between the voltage across the 9 V and the 2 V lamp, which is 7 V
b. i. The voltage across the circuit component will be shared such that the voltage drop across the L1 will decrease.
ii. According to Ohm's law, the current, I, is inversely proportional to the resistors, R, in a circuit.
I ∝ 1/R
The current in a circuit in series is the same for the components in the circuit, such that as the component increases, Ohm's law indicates that the current in the circuit will decrease.
Learn more on Ohm's law here: https://brainly.com/question/27889378
#SPJ1
in a piston which arrange the pressure from maximum pressure to minimum pressure
In a piston, the pressure is arranged from maximum pressure to minimum pressure in the following way:
Maximum pressure is at the top of the piston or the end that is opposite to the connecting rod, while minimum pressure is at the bottom of the end that is attached to the connecting rod. When the fuel-air mixture is ignited in the combustion chamber, it produces high-pressure gases that push the piston towards the connecting rod. This pressure decreases as the piston moves downwards, until it reaches the bottom of its stroke, where the pressure is at its lowest. The process then repeats itself as the piston moves back up towards the top of the cylinder. This movement is known as the piston's stroke. The pressure in the cylinder is controlled by various factors, including the size and shape of the combustion chamber, the fuel-air mixture ratio, and the timing of the ignition.
Learn more about piston here:
https://brainly.com/question/28044328
#SPJ4
The distance from Earth to Mars is 54.6 millions kilometers. A helium molecule has a length of approximately 280 picometers. Find how many helium molecules could fit between these two planets.(Tip: research what are picometers)
Answer:
Approximately 1.95 x 10^20 helium molecules
Explanation:
A picometer is a unit of length equal to one trillionth of a meter, or 10^-12 meters. To find out how many helium molecules could fit between Earth and Mars, we need to first calculate the distance between them in picometers:
54.6 million kilometers = 54.6 x 10^9 meters
54.6 x 10^9 meters = 54.6 x 10^21 picometers (since there are 10^12 picometers in a meter)
Next, we need to calculate how many helium molecules can fit in this distance. We can do this by dividing the distance between Earth and Mars by the length of a helium molecule:
54.6 x 10^21 picometers / 280 picometers per helium molecule
= 1.95 x 10^20 helium molecules
Therefore, approximately 1.95 x 10^20 helium molecules could fit between Earth and Mars, assuming they were lined up end to end without any space between them.
an arrow is shot with an initial upward velocity of feet per second from a height of feet above the ground. the equation models the height in feet t seconds after the arrow is shot. after the arrow passes its maximum height, it comes down and hits a target that was placed feet above the ground. about how long after the arrow was shot does it hit its intended target?
Answer:
Explanation:
So this question is basically asking you to find where 20= -16t^2+100t+5 because you want to find the time for how long after the arrow was launched does it hit the intended target of 20 feet. Using a graphing calculator you put -16t^2+100t+5 into y1 and 20 into y2. Once you do that you can find the intersection point and the x coordinate is your answer because the x value represents the time. So the answer is 6.096 seconds. If you need an exact answer then you need to use the quadratic formula and you would get (25+the square root of 565)/ 8
After the arrow passes its maximum height, it comes down and hits a target that was placed feet above the ground. Long after the arrow was shot, it hit its intended target it will take about 5.2 seconds for it to hit its intended target.
We can use the equation given below to calculate the height of an arrow in feet t seconds after it has been fired. This equation is a quadratic equation.
h(t) = -16t² + 48t + 100The maximum height that the arrow reaches can be determined by using the vertex formula.
The vertex formula for a quadratic equation is given below. t = -b / 2a.
After calculating the value of t, we can find the height of the arrow at this time. After this, we can set up another equation to find out how long it takes for the arrow to hit its intended target. This equation will be given as follows.100 - h(t) = -16t² + 48t + 9.4. By solving this equation, we can get the value of t. It is approximately 5.2 seconds. Therefore, the arrow will hit its intended target about 5.2 seconds after it has been fired.
Learn more about quadratic equation at:
https://brainly.com/question/30098550
#SPJ11
a small 200 g ball and a small 800 g ball are connected by a 40-cm-long, 200 g rigid rod. a) how far is the center of mass from the 800 g ball? b) what is the rotational kinetic energy if the structure rotates about its center of mass at 100 rpm?
a) The center of mass is 28 cm from the 800 g ball. b) The rotational kinetic energy is 0.63 J if the structure rotates about its center of mass at 100 rpm.
To find the center of mass of the system, we need to consider the mass and position of each component. Since the rod is 40 cm long and has a mass of 200 g, we can treat it as a point mass located at its midpoint, which is 20 cm from each ball. The center of mass is then the weighted average of the positions of the three point masses. Using the formula for the center of mass, we find that the center of mass is 28 cm from the 800 g ball.To find the rotational kinetic energy, we need to know the moment of inertia of the system and the angular velocity. Since the system is rotating about its center of mass, we can use the parallel axis theorem to find the moment of inertia. The moment of inertia of the two balls is 0.14 kgm^2, and the moment of inertia of the rod is 0.004 kgm^2. The total moment of inertia is then 0.144 kg*m^2. Converting 100 rpm to radians per second, we get an angular velocity of 10.47 rad/s. Using the formula for rotational kinetic energy, we find that the rotational kinetic energy is 0.63 J.
Learn more about rotational kinetic energy here:
https://brainly.com/question/30107920
#SPJ11
sound waves traveling through air have a frequency of 250 hertz. the sound waves are 1.3 m in length. what is the speed of sound in air?
Answer:
325 metre per second
Explanation:
since v=f x lamda. where lamda is wavelength and f is frequency and v is speed of sound
The speed of sound in air is 325 m/s. The speed of sound in air can be determined by multiplying the wavelength by the frequency.
The following formula can be used to determine the sound speed in air:
v = fλ
Where v is the speed of sound, f is the frequency of the sound wave, and λ is the wavelength of the sound wave.
In this case, the frequency of the sound wave is given as 250 Hz and the wavelength is given as 1.3 meters. Therefore, we can plug these values into the formula and solve for the speed of sound:
v = (250 Hz) x (1.3 m) = 325 m/s
So, the speed of sound in air with a frequency of 250 Hz and a wavelength of 1.3 meters is 325 meters per second.
To know more about speed of sound in air click here:
brainly.com/question/2279936
#SPJ11
when the sun sets, which material would cool down the fastest, assuming they all have the same mass and initial temperature?
When the sun sets, water would cool down the fastest.
When the sun sets, the material that would cool down the fastest, assuming they all have the same mass and initial temperature, is the one with the lowest specific heat capacity.
Specific heat capacity is the amount of heat required to raise the temperature of one gram of a substance by one degree Celsius.
The specific heat capacity of a substance is a measure of how much energy is required to raise the temperature of a given amount of that substance by one degree Celsius.
It is defined as the amount of heat required to raise the temperature of one unit of mass of the substance by one degree Celsius.
The specific heat capacity of a material varies depending on its chemical makeup.
Metals, for example, have a low specific heat capacity, meaning that they heat up and cool down rapidly.
Conversely, water has a high specific heat capacity, meaning that it heats up and cools down more slowly than metals.
For similar question on Specific heat
https://brainly.com/question/27991746
#SPJ11
When Andy talked to his cousin in Ohio, she said it was raining. It was snowing at Andy’s house in Pennsylvania. What is the main reason for the difference in precipitation in the two locations?
Group of answer choices
air pressure
humidity
temperature
wind speed
The main reason for the difference in precipitation in the two locations is due to the difference in temperature. When temperatures are cold enough, the water vapor in the air will condense and form snowflakes.
The temperature in Ohio is likely not cold enough for snow, but the temperature in Pennsylvania is cold enough for the water vapor in the air to turn into snowflakes. The temperature in a given area is determined by a variety of factors, such as air pressure, humidity, and wind speed. Each of these factors can be different in each location, which can lead to a difference in temperature and, ultimately, a difference in precipitation.
Air pressure is the pressure of the atmosphere at a particular location as the higher the air pressure, the warmer the temperature. The humidity determines the amount of water vapor in the air and as the higher the humidity, the more water vapor is in the air and the more likely it is to condense into snow. Wind speed is the speed of the wind at a particular location also the faster the wind, the colder the temperature.
To learn more about temperature click here https://brainly.com/question/24283056
#SPJ1
How much power does the 2200kg truck develop running at the rate of 3.5ms² in 17s
Answer:
459.65 kilowatts.
Explanation:
This question involves calculating the power developed by a truck in motion, given its mass, rate of acceleration, and time.
The formula for power is:
Power = force x velocity
The formula for force is:
Force = mass x acceleration
We can begin by calculating the force applied on the truck:
Force = mass x acceleration Force = 2200kg x 3.5ms^-2 Force = 7700 N
Next, we need to calculate the velocity of the truck. We can use the following formula:
Velocity = Acceleration x Time
Velocity = 3.5ms^-2 x 17s Velocity = 59.5 m/s
Now we can calculate the power developed by the truck:
Power = Force x Velocity Power = 7700 N x 59.5 m/s Power = 459650 Watts or 459.65 kilowatts
Therefore, the power developed by the 2200kg truck running at a rate of 3.5ms^-2 for 17 seconds is 459.65 kilowatts.
Power developed by the truck at the given rate is 458 kW.
What is meant by power?Power of an object is defined as the rate of work done by it in unit time.
Here,
Mass of the truck, m = 2200 kg
Acceleration of the truck, a = 3.5 m/s²
Time taken by the truck, t = 17 s
Power of an object is the product of its force and velocity of the object.
Equation for power of the truck is given by,
Power = F x v
Force, F = m x a
F = 2200 x 3.5 = 7700 N
Velocity, v = a x t
v = 3.5 x 17
v = 59.5 m/s
Therefore,
Power = 7700 x 59.5
Power = 458 kW
Hence,
Power developed by the truck at the given rate is 458 kW.
To learn more about power, click:
https://brainly.com/question/19382734
#SPJ2
three balls, with masses of 3m, 2m, and m, are fastened to a massless rod of length l as shown. the rotational inertia about the left end of the rod is:
The required rotational inertia about the left end of the rod is calculated to be 3ML²/2.
A body's inertia is a property that makes it resist efforts to set it in motion or, if it is already moving, to change the speed or direction of it.
The inertia of a substance is a passive quality that only enables it to withstand active agents like forces and torques. To determine the left's spinning inertia,
I = I₁ + I₂ + I₃ = 3 M(0)² + 2M(L/2)² + M(L)² = 3ML²/2
Thus, the required rotational inertia about the left end of the rod is calculated to be 3ML²/2.
To know more about inertia:
https://brainly.com/question/18113232
#SPJ4
cosmic microwave background radiation (cmbr) is the term used to describe the residual microwave radiation observed everywhere in the universe that seems to have no single source. how is the observation of cmbr used as evidence for the big bang theory?
CMBR is considered evidence for the Big Bang because its temperature and structure are consistent with the theory's predictions.
The cosmic microwave background radiation (CMBR) is viewed as one of the most grounded bits of proof on the side of the Theory of how things came to be. As per this hypothesis, the universe started as a peculiarity and afterward quickly extended, in the long run chilling off and framing matter as far as we might be concerned today. As the universe extended and cooled, it abandoned a radiation field that is noticeable today as the CMBR. The perception of CMBR gives significant bits of knowledge into the early universe, permitting us to concentrate on its temperature and construction. The CMBR is seen to have an almost uniform temperature this way and that, reliable with the Theory of how things came to be's expectation of a homogeneous and isotropic universe. Also, the CMBR shows variances in temperature, which are remembered to have emerged from quantum vacillations in the early universe. Together, these perceptions give solid proof to the Theory of how things came to be's legitimacy.
To learn more about big bang theory, refer:
https://brainly.com/question/30832607
#SPJ4