Select the correct terms to complete this statement about charged particles.
Like charges attract | repel, and opposite charges attract repel. According to Coulomb's law, as the distance between two charged particles decreases, the force between the particles decreases I increases. As the magnitude of the charges decreases, the force decreases | increases.

Answers

Answer 1

Like charges repel each other, while opposite charges attract each other. This principle is one of the fundamental aspects of electrostatics. According to Coulomb's law, the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

As the distance between two charged particles decreases, the force between them increases. This is because the closer the particles are, the stronger the electric field they create, leading to a stronger force of interaction.

On the other hand, as the magnitude of the charges decreases, the force between the particles also decreases. This is because the force is directly proportional to the product of the charges. If one or both of the charges are smaller, the force they exert on each other will be weaker.

In summary, according to Coulomb's law, decreasing the distance between charged particles increases the force between them, while decreasing the magnitude of the charges decreases the force. This understanding of the relationship between charge, distance, and force is crucial in explaining the behavior of charged particles and the interactions between them.

Know more about Coulomb's law here:

https://brainly.com/question/26892767

#SPJ8


Related Questions

a Li+ wavelength in nm= 671 find the experimental energy in J and the n initial and n final by applying the equation E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2

Answers

The experimental energy in J and the n initial and n final by applying the equation in [tex]E= -4.21 * 10^{-19} J[/tex]

The given formula is[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2[/tex]

The formula to calculate the energy of a photon is given by:E= hc / λwhere:E = energy of a photonh = Planck's constantc = speed of lightλ = wavelength of the photon.

Given values are:

λ = 671 nmh = [tex]6.626 * 10-^{34}J.sc = 3.0 * 10^8 m/s[/tex]

By using the formulaE= hc / λE

= [tex]6.626 * 10^{-34} J.s * 3.0 * 10^{8} m/s / (671 * 10^{-9} m)E[/tex]

= [tex]2.96 * 10^{-19[/tex]J

Now, the energy of a photon in joules is found to be 2.96 × 10^-19 J. We will now find the n final and n initial. We need to find out the principle quantum numbers of n initial and n final. Let us apply the Rydberg formula to find out n initial and n final.

We know that:

λ = [tex]R [1/n^2final - 1/n^2initial][/tex]where:λ = 671 nm

n final  = ?n initial  = ?R = Rydberg constantR = [tex]1.097 * 10^7 m^{-1[/tex]

By substituting the given values, we get:

671 nm =[tex](1.097 * 107 m-1) [1/n^2final - 1/n^2initial][/tex]

On solving this, we get:n initial = 2n final = 1

By substituting the obtained values in the energy formula, we get:

[tex]E=-2.18*10^-18J(1/n^2final - 1/n^2initial)Z^2E=-2.18*10^-18J(1/1^2 - 1/2^2)(3^2)[/tex]

[tex]E= -4.21 * 10^{-19} J[/tex]

Know more about  wavelength   here:

https://brainly.com/question/28995449

#SPJ8

What is the molar mass of N2CO3

Answers

Answer:105.99 g/mol

Explanation:

Sodium carbonate is the inorganic compound with the formula Na₂CO₃ and its various hydrates. All forms are white, odourless, water-soluble salts that yield alkaline solutions in water.

Given: D thallium = 11.9/cm^3, 3.85g wanted:volume of thallium in cm^3 ?

Answers

Answer:

To find the volume of the thallium, we can use the formula:

density = mass/volume

Rearranging this formula, we get:

volume = mass/density

Plugging in the given values, we get:

Volume = 3.85g / 11.9 cm^-3

Using a calculator, we can solve for the volume:

Volume = 0.3235 cm^3

Therefore, the volume of the thallium is 0.3235 cm^3.

Explanation:


5 organic functional groups similar to morphine and cannabinol

Answers

Here are five organic functional groups similar to morphine and cannabinol:

1. Phenol group: This is a functional group consisting of a hydroxyl (-OH) group bonded directly to an aromatic ring. It is present in compounds like salicylic acid, which has analgesic properties similar to morphine.

2. Ether group: An ether functional group has an oxygen atom bonded to two organic groups. Compounds such as codeine, a derivative of morphine, contain this group and exhibit similar pain-relieving effects.

3. Amine group: This functional group consists of a nitrogen atom bonded to one or more organic groups. Compounds like tramadol, which is a synthetic opioid, contain amine groups and act as analgesics.

4. Ester group: An ester functional group is formed by the condensation of an alcohol and an acid, resulting in an oxygen atom bonded to a carbon atom and an additional organic group. Some opioids, like heroin, contain ester groups and produce similar effects to morphine.

5. Piperidine group: This is a cyclic amine group with a six-membered ring containing one nitrogen atom. Compounds like fentanyl, a potent synthetic opioid, possess this functional group and exhibit strong analgesic properties.

Please note that while these functional groups are found in compounds with similar effects to morphine and cannabinol, it is important to use such substances only under proper medical supervision and adhere to legal regulations.

What is the molar mass for ZnI2?

Answers

The molar mass of ZnI2 is approximately 319.18 grams per mole.

To determine the molar mass of ZnI2 (zinc iodide), we need to know the atomic masses of zinc (Zn) and iodine (I) and their respective subscripts in the chemical formula.

The atomic mass of zinc (Zn) is approximately 65.38 grams per mole (g/mol), as found on the periodic table. The atomic mass of iodine (I) is approximately 126.90 g/mol.

Since the chemical formula of zinc iodide is ZnI2, it means there are two iodine atoms for every one zinc atom. Therefore, we multiply the atomic mass of iodine by 2.

Molar mass of ZnI2 = (atomic mass of Zn) + 2 × (atomic mass of I)

                 = 65.38 g/mol + 2 × 126.90 g/mol

                 = 65.38 g/mol + 253.80 g/mol

                 = 319.18 g/mol

Hence, the molar mass of ZnI2 is approximately 319.18 grams per mole.

For more questions on molar mass, click on:

https://brainly.com/question/837939

#SPJ8

We have a bomb calorimeter with a heat capacity of 555 J/K. In this bomb calorimeter, we place 1000.0 mL of water. We burn 2.465 g of a solid in this bomb calorimeter. The temperature of the bomb calorimeter and the water increases by 2.22 oC. The molar mass of the solid is 551.2 g/mol. How much heat (in kJ) will be released if we were to burn 0.162 mol of this same solid in the bomb calorimeter? Keep in mind that we want to find the amout of heat released. The specific heat capacity or water is 4.184 J/K/g. Approximate the density of water as being exactly 1.00 g/mL.

Answers

To find the amount of heat released when burning 0.162 mol of the solid in the bomb calorimeter, we can use the concept of heat capacity and the equation:

q = C * ΔT

where:
q is the heat transferred (in joules),
C is the heat capacity of the bomb calorimeter (in joules per Kelvin),
ΔT is the change in temperature (in Kelvin).

First, let's calculate the heat released when burning 2.465 g of the solid:

First, convert the mass of the solid to moles:
moles = mass / molar mass
moles = 2.465 g / 551.2 g/mol
moles = 0.00447 mol

Now, let's calculate the heat released for this amount of solid burned:
q1 = C * ΔT
q1 = 555 J/K * 2.22 K
q1 = 1232.1 J

Now, let's find the heat released per mole of the solid:
q per mole = q1 / 0.00447 mol
q per mole = 1232.1 J / 0.00447 mol
q per mole = 275,695 J/mol

Finally, let's find the heat released when burning 0.162 mol of the solid:
q2 = q per mole * 0.162 mol
q2 = 275,695 J/mol * 0.162 mol
q2 = 44,697 J

Converting the heat released to kilojoules:
q2_kJ = q2 / 1000
q2_kJ = 44,697 J / 1000
q2_kJ = 44.697 kJ

Therefore, if we were to burn 0.162 mol of the solid in the bomb calorimeter, approximately 44.697 kJ of heat would be released.

The equation below shows the products formed when a solution of silver nitrate (AgNO3) reacts with a solution of sodium chloride (NaCl).

Answers

The equation for the reaction between silver nitrate (AgNO3) and sodium chloride (NaCl) is: AgNO3 + NaCl → AgCl + NaNO3.

In this reaction, silver nitrate (AgNO3) reacts with sodium chloride (NaCl) to produce silver chloride (AgCl) and sodium nitrate (NaNO3).

When the two solutions are mixed, the silver ions (Ag+) from silver nitrate combine with chloride ions (Cl-) from sodium chloride to form silver chloride, which is a white, insoluble precipitate. The sodium ions (Na+) from sodium chloride combine with nitrate ions (NO3-) from silver nitrate to form sodium nitrate, which remains in solution.

The reaction is a double displacement reaction, also known as a precipitation reaction, as a solid precipitate (silver chloride) is formed. This reaction occurs due to the exchange of ions between the two reactants.

Silver chloride is sparingly soluble in water and precipitates out of the solution as a solid due to its low solubility. Sodium nitrate, being a soluble ionic compound, remains dissolved in the solution as individual ions.

This reaction is commonly used in the laboratory to test for the presence of chloride ions. The formation of the white precipitate of silver chloride confirms the presence of chloride ions in the solution.

For more such quqestions on silver nitrate visit:

https://brainly.com/question/29145679

#SPJ8

What does the latent heat of fusion measure?
• A. The energy required to melt a substance
B. The energy required to boil a substance
• c. The energy required to heat a substance
• D. The energy required to form a substance

Answers

The latent heat of fusion measures " The energy required to melt a substance" option (A).

The latent heat of fusion refers to the amount of energy required to change a substance from a solid state to a liquid state at its melting point while keeping the temperature constant. It is a specific type of latent heat that measures the energy needed for the phase transition of a substance.

When a substance is in a solid state, its particles are tightly packed and have a regular arrangement. As heat is added to the substance, its temperature gradually rises until it reaches the melting point. At this point, further addition of heat does not increase the temperature but instead causes the substance to undergo a phase change and transform into a liquid state. The energy absorbed during this process is known as the latent heat of fusion.

This energy is used to overcome the attractive forces between the particles in the solid and allow them to break free and move more freely in the liquid state. The latent heat of fusion is crucial in various practical applications, such as melting ice, changing solid metals into liquid form for casting, or utilizing phase change materials for thermal energy storage.

For more questions on latent heat, click on:

https://brainly.com/question/30430924

#SPJ8

With the aid of a clearly labelled diagram, explain the effect of substrate concentration on the rate of reaction catalysed by an allosteric enzyme

Answers

Allosteric enzymes change shape upon binding an effector molecule, displaying a sigmoidal substrate concentration vs. reaction rate curve. The reaction rate increases until saturation, characterized by the enzyme's Km.

Allosteric enzymes are enzymes that change their shape upon binding of another molecule, known as an effector, to a specific site, the allosteric site. These enzymes are essential for regulating metabolic pathways in cells.A graph of substrate concentration vs. reaction rate for an allosteric enzyme often displays a sigmoidal curve. The enzyme initially binds the substrate molecule with a relatively low affinity, which corresponds to a low reaction rate. However, as the substrate concentration increases, more enzyme-substrate complexes are formed, causing a conformational change in the enzyme that increases its affinity for substrate molecules at other sites. As a result, the reaction rate increases sharply, but only up to a certain point, after which it levels off. The substrate concentration at which the reaction rate is half of its maximum value is known as the enzyme's Michaelis-Menten constant (Km). A substrate concentration that exceeds the Km does not affect the reaction rate. The enzyme is saturated with substrate molecules, so it cannot bind anymore.

For more questions on Allosteric enzymes

https://brainly.com/question/29548129

#SPJ8

How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?

Answers

C. 2, hydrogen atoms could bong with oxygen in this illustration of an oxygen atom.

In the given illustration of an oxygen atom, there are two unpaired electrons in the outermost electron shell. Each oxygen atom can form a covalent bond by sharing one electron with another atom. In the case of oxygen, it has a valence of 2, which means it can form up to two covalent bonds. Each hydrogen atom has one electron, and it requires one additional electron to complete its outermost electron shell.

Therefore, in the given illustration, the oxygen atom can form two covalent bonds with hydrogen atoms. This is represented by the formula H2O, where one oxygen atom is bonded to two hydrogen atoms.

Hence, the correct answer is C. 2. Two hydrogen atoms can bond with one oxygen atom to form a stable molecule of water. The sharing of electrons in covalent bonds allows atoms to achieve a more stable electron configuration and form compounds with different properties.

The question was incomplete. find the full content below:

How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?

A. 0

B. 1

C. 2

D. 6.

Know more about covalent bonds here:

https://brainly.com/question/3447218

#SPJ8

The atom spectrum have a wavelength in 1212.7 A and 6562.8 A. These two lines result from transition in different series, one with nr 1 & the other with n-2. Identify n, for each line.​

Answers

The wavelength of 1212.7 Å corresponds to an electronic transition from n=1 to n=2, while the wavelength of 6562.8 Å does not have enough information to determine the value of n.

In atomic spectra, the wavelength of spectral lines corresponds to specific electronic transitions within an atom. Each line is associated with a particular energy level transition, which is characterized by the principal quantum number (n) of the electronic orbitals involved.

Let's analyze the given wavelengths:

Wavelength of 1212.7 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. We need to find the values of n for this transition.

We know that the Balmer series in the hydrogen atom is defined by transitions from higher energy levels to the n=2 level. Therefore, the wavelength of 1212.7 Å corresponds to an electronic transition within the Balmer series. From the Balmer series formula,

1/λ = R_H * [tex](1/2^2 - 1/n^2[/tex]), where R_H is the Rydberg constant for hydrogen, we can solve for n. Rearranging the formula, we get:

1/λ = R_H * (1/4 - 1/[tex]n^2[/tex])

1/λ = R_H/n^2 - R_H/4

1/λ + R_H/4 = R_H[tex]/n^2[/tex]

1/λ + 109677 cm^-1 = 109677 cm^-1/n^2

Substituting the value of the wavelength (1212.7 Å = 121270 nm = 12127000 Å) into the equation, we can solve for n:

1/12127000 + 109677 cm^-1 = 109677 cm^-1/n^2

[tex]n^2[/tex] = 109677 cm^-1 / (1/12127000 + 109677 cm^-1)

[tex]n^2[/tex]≈ 109677 cm^-1 / 109678 cm^-1

n ≈ sqrt(1) ≈ 1

Therefore, the electronic transition corresponding to the wavelength of 1212.7 Å is from n=1 to n=2.

Wavelength of 6562.8 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. To determine the value of n for this transition, we can use a similar approach as before. However, since the wavelength is not specified further, we cannot determine the exact series or atom.

Different atoms or series can have transitions that produce the same wavelength. Without additional information, we cannot pinpoint the specific value of n for this wavelength.

For more such questions on wavelength visit:

https://brainly.com/question/28995449

#SPJ8

Hydrated copper(II) Sulfate was heated: what would be the ice for?

Answers

The ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.

When [tex]hydrated copper(II) sulfate[/tex] [tex](CuSO_ {4} .H_{4} O)[/tex] is heated, the purpose of the ice is to provide a cooling effect during the process. The hydrated copper(II) sulfate contains water molecules (H2O) that are chemically bonded to the copper sulfate compound. The formula [tex]CuSO_{4} .H_{2} O[/tex] indicates that there are x moles of water molecules per mole of copper(II) sulfate.

As the [tex]hydrated copper(II) sulfate[/tex] is heated, the heat energy causes the water molecules to undergo a physical change and turn into steam. This process is known as dehydration. The water molecules break their chemical bonds with the copper sulfate compound and are released in the form of steam.

The presence of ice during the heating process helps maintain a lower temperature in the reaction vessel. The ice absorbs the heat energy from the surroundings, allowing for a controlled and gradual increase in temperature. This controlled heating prevents sudden temperature changes and potential hazards, such as splattering or overheating.

In summary, the ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.

For more questions on dehydration, click on:

https://brainly.com/question/1301665

#SPJ8

Suppose a solution has a density of 1.87 g/mL. If a sample has a mass of 17.5 g the volume of the sample in mL is what?

Answers

The volume of the sample in mL is 9.36 mL.

We can use the formula:

Density = Mass/Volume

Rearranging the formula gives:

Volume = Mass/Density

Substituting the given values gives:

Volume = 17.5 g / 1.87 g/mL = 9.36 mL.

combustion always result in to formation of water. what other type of reactions may result into formation of water? examples of these reactions​

Answers

As combustion always result into the formation of water, the other type of reactions that may result into formation of water are Acid-Base Neutralization Reactions and Hydrogen and Oxygen Reaction.

Acid-Base Neutralization Reactions:

A neutralisation reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products.

H⁺ ions and OH⁻ ions combine to generate water during a neutralisation reaction. Acid-base neutralisation is the most common type of neutralisation reaction.

Example: Formation of Sodium Chloride (Common Salt):

HCl + NaOH → NaCl + H₂O

Hydrogen and Oxygen Reaction:

Water vapour is created when hydrogen gas (H₂) and oxygen gas (O₂) are combined directly. This reaction produces a lot of heat and releases a lot of energy.

Example: 2 H₂ + O₂ → 2 H₂O

Learn more about reactions:

https://brainly.com/question/25769000

Explain the effect of Global Warming on land and sea breeze.

Answers

Global warming affects land and sea breezes. It can weaken land breezes due to increased land temperatures and disrupt the timing and intensity of these breezes. Conversely, it can strengthen sea breezes with higher water temperatures and influence atmospheric conditions. Regional variations apply.

7. [day Dr. Linus Pauling says that if you take 1500. mg of vitamin C each day you will have milder and fewer colds. How many pounds per year is this? (assume 365 days per year)​

Answers

Taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.

Dr. Linus Pauling suggested that taking 1500 mg of vitamin C daily could result in milder and fewer colds. To determine the weight in pounds per year, we'll first convert milligrams to pounds and then multiply by the number of days in a year.

To convert milligrams to pounds, we need to know that there are 453,592.37 milligrams in a pound. Therefore, 1500 mg is equal to 0.0033 pounds (1500 mg / 453,592.37 mg/lb).

Now, to calculate the weight in pounds per year, we'll multiply 0.0033 pounds by the number of days in a year (365).

Weight in pounds per year = 0.0033 pounds/day * 365 days/year = 1.2045 pounds/year.

Therefore, taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.

It's important to note that while this calculation provides the weight equivalent, the effectiveness and recommended dosage of vitamin C for preventing colds should be discussed with a healthcare professional, as individual needs may vary.

For more questions on vitamin C, click on:

https://brainly.com/question/24268138

#SPJ8

Which chemical equation represents a precipitation reaction ?

Answers

The correct option that represents a precipitation reaction is:

B. K2CO3 + PbCl2 -> 2KCl + PbCO3

In a precipitation reaction, two aqueous solutions are mixed, resulting in the formation of an insoluble solid called a precipitate. This solid is formed due to the combination of certain ions that are no longer soluble in the solution.

In option B, when potassium carbonate (K2CO3) reacts with lead chloride (PbCl2), it produces potassium chloride (2KCl) and lead carbonate (PbCO3) as the products. Lead carbonate is an insoluble compound and forms a precipitate, which indicates a precipitation reaction.

Options A, C, and D do not represent precipitation reactions:

- Option A represents a double displacement reaction between magnesium bromide (MgBr2) and hydrochloric acid (HCl), resulting in the formation of magnesium chloride (MgCl2) and hydrogen bromide (HBr).

- Option C represents a substitution reaction between lithium acetate (LiC2H3O2) and tetrabromotitanium (IV) (TiBr4), forming lithium bromide (LiBr) and tetrakis(acetato) titanium (IV) (Ti(C2H3O2)4).

- Option D represents a double displacement reaction between ammonium nitrate (NH4NO3) and copper chloride (CuCl2), resulting in the formation of ammonium chloride (NH4Cl) and copper nitrate (Cu(NO3)2).

Therefore, option B is the correct representation of a precipitation reaction.

F0r more questions on precipitation, click on:

https://brainly.com/question/14330965

#SPJ8

Acetic acid has the molecular formula CH3COOH. How many atoms of oxygen are there in 60 grams of acetic acid?

Answers

There are approximately 1.203 × 10^24 atoms of oxygen in 60 grams of acetic acid.

To determine the number of atoms of oxygen in 60 grams of acetic acid (CH3COOH), we need to consider the molar mass and the molecular formula of acetic acid.

The molar mass of acetic acid can be calculated by summing the atomic masses of each element in its molecular formula. The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are approximately 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.

Molar mass of CH3COOH = (1 × 12.01 g/mol) + (4 × 1.01 g/mol) + (2 × 16.00 g/mol) + 1.01 g/mol

= 60.05 g/mol

Now, we can calculate the number of moles of acetic acid in 60 grams using the molar mass:

Number of moles = Mass / Molar mass

= 60 g / 60.05 g/mol

≈ 0.999 moles

From the molecular formula of acetic acid, we can see that there are two atoms of oxygen in each molecule.

Therefore, the number of atoms of oxygen in 60 grams of acetic acid can be calculated by multiplying the number of moles by the Avogadro's number, which represents the number of particles (atoms, molecules, or ions) in one mole of a substance. Avogadro's number is approximately 6.022 × 10^23 particles/mol.

Number of atoms of oxygen = Number of moles × Avogadro's number × Number of oxygen atoms in one molecule

= 0.999 moles × 6.022 × 10^23 particles/mol × 2

≈ 1.203 × 10^24 atoms

For more such questions on acetic acid. visit:

https://brainly.com/question/15231908

#SPJ8

what is the equivalent resistance of this circuit

Answers

Answer: 100 ohms.

Explanation:

The circuit is composed of two parallel branches (upper and lower), with one resistor in the upper branch (150) and two resistors in the lower branch (250 and 50).

The lower branch resistors are in series, so the lower branch's resistance is:

250 + 50 = 300.

Now, the upper branch (150) and total lower branch (300) are in parallel, so:

[tex]\frac{1}{R} = \frac{1}{150} + \frac{1}{300}[/tex]

That is,

[tex]\frac{1}{R} = \frac{3}{300} = \frac{1}{100}[/tex],

Solving for R, we find R = 100.

The equivalent resistance of this circuit is 100 ohms.

If the pH of a solution is 4.5 and the other pH of another solution is 7.9, what are the solutions for pH, pOH, [H+], and [OH-]?​

Answers

For the solution with a pH of 7.9:

pH = 7.9

pOH = 14 - pH = 14 - 7.9 = 6.1

[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)

[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)

The pH of a solution is a measure of its acidity, while pOH is a measure of its alkalinity. The pH and pOH values are related through the equation pH + pOH = 14.

For the solution with a pH of 4.5:

pH = 4.5

pOH = 14 - pH = 14 - 4.5 = 9.5

[H+] = 10^(-pH) = 10^(-4.5) (in mol/L)

[OH-] = 10^(-pOH) = 10^(-9.5) (in mol/L)

For the solution with a pH of 7.9:

pH = 7.9

pOH = 14 - pH = 14 - 7.9 = 6.1

[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)

[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)

Note: The [H+] and [OH-] concentrations can also be calculated using the equation [H+][OH-] = 1 x 10^(-14) at 25°C.

For more questions on alkalinity, click on:

https://brainly.com/question/867708

#SPJ8

The composition of a compound is 28.73% K, 1.48% H, 22.76% P, and 47.03% O. The molar mass of the
compound is 136.1 g/mol.
I

Answers

The compound has an empirical formula of [tex]K_2H_2P_2O_8[/tex] and a molecular formula of [tex]K_2HPO_4[/tex].

The given compound has a percent composition of K = 28.73%, H = 1.48%, P = 22.76%, and O = 47.03%. Its molar mass is 136.1 g/mol. To determine its molecular formula, we need to find its empirical formula and calculate its molecular formula from its empirical formula.The empirical formula is the smallest whole number ratio of atoms in a compound. It can be determined by converting the percent composition of the elements into their respective moles and dividing each by the smallest number of moles calculated. The moles of K, H, P, and O in 100 g of the compound are: K = 28.73 g x (1 mol/39.1 g) = 0.734 molH = 1.48 g x (1 mol/1.01 g) = 1.46 molP = 22.76 g x (1 mol/30.97 g) = 0.736 molO = 47.03 g x (1 mol/16.00 g) = 2.94 molDividing each by the smallest number of moles gives the following ratios: K = 0.734/0.734 = 1H = 1.46/0.734 = 2P = 0.736/0.734 = 1.002O = 2.94/0.734 = 4. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. To calculate the molecular formula, we need to determine the factor by which the empirical formula should be multiplied to obtain the molecular formula. This can be done by comparing the molar mass of the empirical formula to the molar mass of the compound.The molar mass of [tex]K_2H_2P_2O_8[/tex] is: [tex]M(K_2H_2P_2O_8)[/tex] = (2 x 39.1 g/mol) + (2 x 1.01 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol) = 276.2 g/mol. The factor by which the empirical formula should be multiplied is: M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula is obtained by multiplying the empirical formula by this factor: [tex]K_2H_2P_2O_8 * 0.4935 = K_2HPO_4[/tex]. Therefore, the molecular formula of the compound is [tex]K_2HPO_4[/tex].The molecular formula of the given compound having a composition of 28.73% K, 1.48% H, 22.76% P, and 47.03% O with a molar mass of 136.1 g/mol is [tex]K_2HPO_4[/tex]. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. The compound's molecular formula is calculated by determining the factor by which the empirical formula should be multiplied to obtain the molecular formula. The factor is M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula of the compound is obtained by multiplying the empirical formula by this factor, resulting in the molecular formula [tex]K_2HPO_4[/tex].

For more questions on empirical formula

https://brainly.com/question/13058832

#SPJ8

The correct question would be as

The composition of a compound is 28.73% K. 1.48% H, 22.76% P, and 47.03% O. The molar mass of the compound is 136.1 g/mol. What is the Molecular Formula of the compound?

[tex]KH_2PO_4\\KH_3PO_4\\K_2H_4P_20_{12}\\K_2H_3PO_6[/tex]

Which of the following types of radiation can penetrate the most deeply into your body? (2 points)

Alpha rays
Beta rays
Gamma rays
Proton rays

Answers

gamma rays penetrate the most deeply!!

John Dalton believed which of the following about atoms?

Atoms are real even though they're invisible.
The atom could be divided into smaller parts.
All atoms of a single substance are identical.
Atoms of different substances differ by weight.

Answers

Atoms of different substances differ by weight. Option D

A) Atoms are real even though they're invisible: Dalton proposed that atoms are fundamental, indivisible particles that make up all matter. While atoms themselves cannot be observed directly, their existence and behavior can be inferred through their effects on matter.

B) The atom could be divided into smaller parts: Initially, Dalton believed that atoms were indivisible and the ultimate building blocks of matter. However, subsequent scientific discoveries, such as the discovery of subatomic particles like protons, neutrons, and electrons, revealed that atoms could be further divided into smaller components.

C) All atoms of a single substance are identical: Dalton postulated that atoms of the same element are identical in size, mass, and chemical properties. According to his atomic theory, different elements are composed of unique atoms, and atoms of the same element are identical to one another.

D) Atoms of different substances differ by weight: Dalton recognized that atoms have different masses and proposed that the differences in atomic weight account for the distinct properties of different elements. He formulated the law of multiple proportions, which states that elements combine in fixed ratios of masses to form compounds.

Option D

For more such questions on Atoms visit:

https://brainly.com/question/6258301

#SPJ8

what is the PGE of a 257 kg boulder at the top of a 19 m cliff

Answers

The potential energy (PGE) of an object can be calculated using the formula: PGE = mgh, where m is the mass of the object, g is the acceleration due to gravity (approximately 9.8 m/s² on Earth), and h is the height or vertical distance.

Given:
Mass of the boulder (m) = 257 kg
Height of the cliff (h) = 19 m
Acceleration due to gravity (g) = 9.8 m/s²

Now we can calculate the potential energy:

PGE = (257 kg) × (9.8 m/s²) × (19 m)
PGE = 485,366 J

Therefore, the potential energy of the 257 kg boulder at the top of the 19 m cliff is approximately 485,366 joules (J).

organic functional groups that are found in morphine but not in cannabinol

Answers

Organic functional groups found in morphine but not in cannabinol include:

1. Phenol group: Morphine contains a phenol group (-OH) attached to an aromatic ring, which is absent in cannabinol.

2. Ether group: Morphine possesses an ether functional group (-O-) in its structure, while cannabinol does not have this group.

3. Amino group: Morphine contains an amino group (-NH2), which is not present in cannabinol.

4. Tertiary amine group: Morphine has a tertiary amine group (-NR3), whereas cannabinol lacks this functional group.

5. Ester group: Ester functional groups (-COO-) are found in some morphine derivatives, but cannabinol does not possess this group.

It's important to note that while these functional groups differentiate morphine from cannabinol, the effects and properties of these compounds are determined by their overall chemical structure, not just the presence or absence of specific functional groups.

Mention three significant of water in coal fired power station

Answers

Water in coal-fired power stations is used for cooling, steam generation, and pollution control, including capturing sulfur dioxide and cooling exhaust gases. Efficient water recycling helps minimize environmental impact.

Water plays a critical role in coal-fired power stations. The power stations need large quantities of water for a variety of purposes. Water is primarily used to cool the power plant, maintain a safe temperature in the boilers, and also to generate steam. In this context, this answer will discuss three significant uses of water in coal-fired power stations. Significant uses of water in coal-fired power stations1. Cooling: Power stations require water for cooling purposes. When water is used for cooling, it absorbs the heat produced by the combustion process. Cooling towers are responsible for releasing the heated water, which is then reused.2. Steam generation: Water is required to generate steam, which is used to rotate turbines and generate electricity. The water used to generate steam must be treated to prevent the accumulation of harmful minerals, which can damage the power plant.3. Pollution control: Water is utilized to reduce air pollution. Flue gas desulfurization systems utilize water to capture sulfur dioxide from power plants. Water is also used to cool exhaust gases that are produced during combustion.In conclusion, the three significant uses of water in coal-fired power stations include cooling, steam generation, and pollution control. These processes require large amounts of water, which is why coal-fired power stations are often located near water sources. By recycling water, power stations can conserve water and minimize their environmental impact.

For more questions on pollution control

https://brainly.com/question/16452378

#SPJ8

What does percent composition tell you about a molecule?

Answers

Answer:

Percent composition tells you the relative amounts of each element in a molecule by mass. It can be used to determine the empirical formula of a compound, as well as to compare the composition of different molecules.

For example, the percent composition of water (H2O) is 11.19% hydrogen and 88.81% oxygen by mass. This tells us that there are two hydrogen atoms for every one oxygen atom in the molecule.

Explanation:

Brainliest Plsss


6) A gas that has a volume of 33 liters, a temperature of 24 °C, and an unknown pressure has its
volume increased to 41,000 milIILiters and its temperature decreased to 13 °C. When the
pressure was measured after the change it was determined to be 2.7atm, what was the original
pressure?

Answers

The original pressure[P₁] is approximately 0.0848 atm

We can use the combined gas law equation, which relates the initial and final conditions of a gas sample. The combined gas law equation is as follows:

(P₁ × V₁) / (T₁) = (P₂ × V₂) / (T₂)

Given:

V₁ = 33 liters

T₁ = 24 °C = 24 + 273.15 = 297.15 K (converted to Kelvin)

V₂ = 41,000 milliliters = 41 liters (converted to liters)

T₂ = 13 °C = 13 + 273.15 = 286.15 K (converted to Kelvin)

P₂ = 2.7 atm

We need to find P₁, the original pressure.

Plugging in the values into the combined gas law equation:

(P₁ × 33) / (297.15) = (2.7 × 41) / (286.15)

Simplifying the equation:

33P₁ = (2.7 × 41 × 297.15) / (286.15)

33P₁ ≈ 2.804

Dividing both sides by 33:

P₁ ≈ 2.804 / 33

P₁ ≈ 0.0848 atm

To know more about Gas Law Equation refer to this link

https://brainly.com/question/25736513

Starting with 0.3500 mol CO(g) and 0.05500 mol COCl2(g) in a 3.050 L flask at 668 K, how many moles of CI2(g) will be present at equilibrium? CO(g) + Cl2(8)》COCl2(g)
Kc= 1.2 x 10^3 at 668 K

Answers

At equilibrium, the number of moles of Cl2(g) present is approximately 347.37 mol.

To determine the number of moles of Cl2(g) at equilibrium, we need to use the given equilibrium constant (Kc) and set up an ICE table to track the changes in the reactants and products.

The balanced equation for the reaction is:

CO(g) + Cl2(g) ⇌ COCl2(g)

Let's set up the ICE table:

  CO(g)     +     Cl2(g)     ⇌     COCl2(g)

Initial: 0.3500 0.05500 0

Change: -x -x +x

Equilibrium: 0.3500 - x 0.05500 - x x

Using the equilibrium concentrations in the ICE table, we can write the expression for the equilibrium constant (Kc) as:

Kc = [COCl2(g)] / [CO(g)][Cl2(g)]

Substituting the values into the equation, we have:

1.2 × 10^3 = (0.05500 - x) / [(0.3500 - x)(0.05500 - x)]

Simplifying the equation, we can cross-multiply and rearrange:

1.2 × 10^3 × (0.3500 - x)(0.05500 - x) = 0.05500 - x

Expanding and rearranging, we get:

0 = (1.2 × 10^3 × 0.05500 - 1.2 × 10^3x + 0.05500x) - x

Simplifying further:

0 = 66 - 1.245x + 0.05500x - x

0 = 66 - 0.19x

0.19x = 66

x = 66 / 0.19

x ≈ 347.37

For more such questions on equilibrium visit:

https://brainly.com/question/19340344

#SPJ8

Which element is the mostvreactive, based on the data?

A. Element J
B. Element K
C. Element L
D. Element I​

Answers

The most reactive element based on the given data among the given options is option c) Element J.  

This can be determined based on their placement on the periodic table. The reactivity of an element is dependent on its position on the periodic table, particularly its electron configuration and the number of valence electrons it has. For instance, elements located in the top left corner of the periodic table are typically the most reactive.

They have fewer electrons in their outermost shell and have a tendency to lose them or combine with other elements in order to obtain a full outer shell or achieve stability.In this case, Element J is most likely located in the far left of the periodic table, most likely in the alkali metals group, which contains some of the most reactive metals.

Alkali metals are highly reactive because they only have one valence electron, making it easy for them to give it up and form positive ions. As a result, Element J is the most reactive among the given elements.The correct answer is c.

Know more about   valence electrons   here:

https://brainly.com/question/371590

#SPJ8

Other Questions
Observe young children playing, either in your own family, or think back to when you were a child. Based on the games played and George Herbert Mead's theory of the development of the self, can you tell if they are in the play or game stage? Post your observations here. An iron rod is heated to temperature T. At this temperature, the iron rod glows red, and emits power P through thermal radiation. Suppose the iron rod is heated further to temperature 27. At this new temperature, what is the power emitted through thermal radiation? a) P b) 2P c) 4P d) 8P e) 16P Suppose the root-mean-square speed of molecules in an ideal gas is increased by a factor of 10. In other words, the root-mean-square speed is increased from Vrms to 10 Vrms. What happens to the pressure, P, of the gas? a) Pincreases by a factor of 100. b) P increases by a factor of 10. c) P increases by a factor of 10. d) P remains unchanged. e) None of the above Suppose the constant-pressure molar specific heat capacity of an ideal gas is Cp = 33.256 J/mol K. Based on this information, which of the following best describes the atomic structure of the gas? a) The gas is a monatomic gas. b) The gas is a cold diatomic gas. c) The gas is a hot diatomic gas. d) Molecules of the gas have three or more atoms. e) None of the above A solution containing the generic MX complex at 2.55 x 10-2 mol/L in dynamic equilibrium with the species Mn+ and Xn-, both at 8.0 x 10-6 mol/L. Answer:a) The chemical equation for dissociation of the complex.b) The expression to calculate the instability constant of this complex.c) Calculate the instability constant of this complex. The reaction A+38 - Products has an initial rate of 0.0271 M/s and the rate law rate = kare), What will the initial rate bei Aldean [B] is holved? 0.0135 M/S 0.0542 M/S 0.0271 M/S 0.069 M/S A 460-V 250-hp, eight-pole Y-connected, 60-Hz three-phase wound-rotor induction motor controls the speed of a fan. The torque required for the fan varies as the square of the speed. At full load (250 hp) the motor slip is 0.03 with the slip rings short circuited. The rotor resistance R2 =0.02 ohms. Neglect the stator impedance and at low slip consider Rgs >> Xz. Determine the value of the resistance to be added to the rotor so that the fan runs at 600 rpm. Please answer electronically, not manually1- What do electrical engineers learn? Electrical Engineer From courses, experiences or information that speed up recruitment processes Increase your salary if possible Transcribed image text: (a) Compute the multiplicative inverse of 16 (mod 173). Use the Extended Euclidean algorithm, showing the tableau and the sequence of substitutions. Express your final answer as an integer between 0 and 172 inclusive. [6 points] (b) Find all integer solutions to 16x = 12 (mod 173) You may use part (a) without repeating explanations from there. Your final answer must be in set-builder notation (for example {z: = k. 121 + 13 for some k Z}), and you must show work for how you find the expression in your set-builder notation. [8 points] In terms of INCREASING elastic modulus, materials can be arranged as:Select one:A.Epolymers<B.EpolymersC.EceramicsD.Epolymers You must show your mathematical working for full marks. a. A social media site uses a 32-bit unsigned binary representation to store the maximum number of people that can be in a group. The minimum number of people that can be in a group is 0. i. Explain why an unsigned binary representation, rather than a 32-bit signed binary representation, was chosen in this instance. ii. Write an expression using a power of 2 to indicate the largest number of people that can belong to a group. iii. Name and explain the problem that might occur if a new member tries to join when there are already 4,294,967,295 people in the group. b. On a particular day, you can get 0.72 pounds for 1 dollar at a bank. This value is stored in the bank's computer as 0.101110002. i. Convert 0.101110002 to a decimal number, showing each step of your working. ii. A clerk at the bank accidently changes this representation to 0.101110012. Convert this new value to a decimal number, again showing your working. iii. Write down the binary number from parts i. and ii. that is closest to the decimal value 0.72. Explain how you know. iv. A customer wants to change $100,000 to pounds. How much more money will they receive (to the nearest penny) if the decimal value corresponding to 0.101110012 is used, rather than the decimal value corresponding to 0.101110002? Which of the following kidney tests is more clinically sensitive to assess Glomerular Filtration Rate (GFR)? creatine clearance B-microglobulin protein in urine urea clearance A firm is considering two different financing capital structures (CS1 and CS2). In the first capital structure CS1 the firm will issue equity which will pay expected dividends of $2 million every year perpetually, and debt of maturity 10 years that will pay expected coupons of $3 million annually (6% of face value of $50 million). The equity is discounted at a rate of 9.89% annually, and the debt is discounted a rate of 6% annually.In the second capital structure the firm will issue equity which will pay expected dividends of $4 million every year perpetually, and debt of maturity 10 years that will pay coupons of $1 million annually (8% of face value of $12.5 million). The debt is discounted a rate of 8% annually. What is the rate of discount for equity in CS2?Assume that Modigliani-Miller and its assumptions are true. Round the answer to two decimals in percentage form. Please write % sign in the units box. According to the Greatest Happiness Principle, O A. the right action is the one that makes the agent as happy as possible. O B. the right action is the one that produces happiness for as many people as possible. OCthe right action is the one that produces only pleasure. O D.none of the above. Legal Environment of BusinessRead the landmark Heart of Atlanta Motel case on page 74. When you are done, explain: what the case was about; what the court decided and why; and then whether you agree with the decision and why.CASE: Critical Legal Thinking Heart of Atlanta Motel v. United States "One need only examine the evidence which we have discussed... to see that Congress may... prohibit racial discrimination by motels serving travelers, however 'local" their operations may appear." -Clark, Justice The Heart of Atlanta Motel, located in the state of Georgia, had 216 rooms available to guests. The motel was readily accessible to motorists using U.S. interstate highways 75 and 85 and Georgia state highways 23 and 41. The motel solicited patronage from outside the state of Georgia through various national advertising media, including magazines with national circulation. Approximately 75 percent of the motel's registered guests were from out of state. The Heart of Atlanta Motel refused to rent rooms to blacks. Congress enacted the Civil Rights Act of 1964, which made it illegal for motels, hotels, and other public accommodations to discriminate against guests based on their race. After the act was passed, the Heart of Atlanta Motel continued to refuse to rent rooms to blacks. The owner-operator of the motel brought an action in U.S. district court, Heart of Atlanta Motel v. United States, to have the Civil Rights Act of 1964 declared unconstitutional. The plaintiff argued that Congress, in passing the act, had exceeded its powers to regulate interstate commerce under the Commerce Clause of the U.S. Constitution. The U.S. Supreme Court held that the provisions of the Civil Rights Act of 1964 that prohibited discrimination in accommodations were constitutional as a proper exercise of the commerce power of the federal government. The U.S. Supreme Court stated, The power of Congress over interstate commerce is not confined to the regulation of commerce among the states. It extends to those activities intrastate which so affect interstate commerce or the exercise of the power of Congress over it as to make regulation of them appropriate means to the attainment of a legitimate end, the exercise of the granted power of Congress to regulate interstate commerce. Heart of Atlanta Motel v. United States, 379 U.S. 241, 85 S.Ct. 348, 1964 U.S. Lexis 2187 (Supreme Court of the United States) Given the piecewise functions shown below, select all of the statements that are true. Label the phase change turning ice to water, water to steam, steam to water, and water toice. Kindly answer the discussion questions pertaining to the case below.The Frustrated ManagerA professional colleague who teaches total quality concepts received the following e-mail from a former student:72 I was wondering if you could offer me some thoughts on a particular situation that plagues the company I work for. Our workforce is unionized and has a long history of anti-company sentiment. Upper management has set up the assembly area as an example of employee involvement and the blossoming empowered workforce to show off to customers. They often bring in customers to help gain future contracts. One customer in particular is very sensitive to cost, quality, and schedule, and has had some bad experiences with us in the past. The customer has clearly told us that it wants to see an empowered work force making key decisions. If this does not happen, it will not award the contract. This information has been relayed to the work teams in the area, but several work teams, in their team meetings, tell us they dont want to be empowered. The attitude (as I see it) appears to be as follows: "We know how to build our products, the customers do not. So, get the customers out of our business and tell them to take the product when were done with it, regardless of how we choose to build it." As many times as I inform them that customers will not buy our products in that manner, I am given the same answer. How would you suggest I get these teams to take the gun away from their own heads? They have a management who is willing to hand over the power. They have the tools necessary to make informed decisions on the shop floor. They just dont have the inspiration to take the power and to run with it. My question is simple: Is it possible to create an empowered workforce in an old union environment? How would you advise him? Carlas Quick Service Restaurant Job Carla works at a typical quick service restaurant (QSR). She is never involved in any problem-solving activities because the system dictates they must defer to managers when problems arise. In addition, she has never been asked to provide any input at the store level of the organization. Her manager tells her what to do and micro-manages her work. Daily information, schedules, and work method changes (e.g., when new menu items are introduced) are posted on notes in a break room bulletin board. Carla isnt very happy in her job and is thinking of quitting to find something else. She has seen about half of her co- workers quit in the last year.Discussion Questions1. High attrition rates in the QSR industry may be attributed to low levels of employee engagement within the organization. How does high turnover impact product quality and customer service in the QSR industry, as well as the costs to the organization? 2. How can Carlas manager or the corporate office improve employee involvement and engagement? The sound of running water in the kitchen muffles your friend's voice when he asks you a question from the other room. This is an example of what kind of noise? A. physiological-impalment B. semantic C. environmental D. syntactical A tank contains oxygen (O_2) at a pressure of 7.00 atm. What is the pressure in the tank in terms of the following units? torr Express the pressure in torr to three significant figures. Part B lb/ in^2Express the pressure in pounds per square inch to three significant figures. Part c mmHg_gExpress the pressure in millimeters of mercury to three significant figures. Express the pressure in kilopascals to three significant figures. What is the graph of f(x) = 0.5(4)x (x is an exponent) A lead compensator Select one: a. speeds up the transient response and improves the steady state behavior of the system b. improves the steady state behavior of the system but keeps the transient response the sam Oc. does not change anything Od. improves the transient response of the system sedloper