someone help asap its due in 10 mins

Answer:

180 g

Explanation:

a) The change in concentration of each reactant and product as a function of reaction rate is − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt.

b) The rate as to how fast is [HI] decreasing is 4 mol/[tex]L^{-s}[/tex].

A chemical reaction is the process by which a single or more reactants change into a single or more new products. Chemical building blocks or compounds make up substances.

Given balance chemical reaction,

H₂(g) + I₂(g) → 2HI(g)

a) The rate of reaction in terms of the change in concentration of each reactants & products is

Rate = − Δ[H₂]/Δt = -Δ[I₂]/Δt = +1/2Δ[HI]/Δt

b)  where 2, 1, 1 and stoichiometric coefficients of HI, H₂ and I₂ respectively.

where - sign indicates consumption and + ve sign indicates formation

given d[I₂]/dt =2

-d[HI]/2dt= 2

-d[HI]/dt = 4 mol/[tex]L^{-s}[/tex].

To know more about chemical reaction visit:

https://brainly.com/question/29039149

#SPJ4

Answer:

Hydroxy(oxo)bismuthine oxide

The molarity of KOH solution  will be 0.75 M.

The amount of moles of solute per liter of solution is known as molarity (M). Molarity is defined as moles of solute per liter of solution. To ascertain the concentration of an identified analyte, titration is a typical laboratory technique for quantitative chemical analysis. A standard solution with a known concentration and volume is prepared as the reagent, also known as the titrant or titrator.

The balanced equation is

[tex]H_{2} SO_{4}[/tex]+ 2KOH = [tex]2H_{2} O[/tex]+  [tex]K_{2} SO_{4}[/tex]

2.50 x [tex]10^{-2}[/tex] M= [tex]\frac{x}{0.2 L}[/tex]

So, 0.75 M KOH.

So, The molarity of KOH solution  will be 0.75 M.

Learn more about Molarity

brainly.com/question/13601876

#SPJ4

Answer:

Option A, light energy from the sun

Explanation:

In the process of photosynthesis, the energy from sun in the form of light and heat is taken to undergo glycolysis and prepare glucose/starch (chemical).  

Thus, the light and heat energy of sun is converted into the chemical energy.  

Option B and C are incorrect because no kinetic energy or chemical energy is taken from any source.  

Option D is also incorrect because heat is taken but it is not taken from the surrounding environment. The source of heat energy is sun.  

Thus, only option A is correct

Answer:

it can predict the properties of new elements, because it organizes the elements according to their atomic numbers.

Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms. They hope that the two nuclei at the centre of these atoms will fuse and form a heavier nucleus.

When these heavy elements form, they are usually highly unstable. They decay so quickly that we don’t usually see the element itself. Instead, we see a decay product. In that respect, even new elements aren't always 'discovered' directly. In some cases, scientists haven’t synthesized enough of the element for us to know what the element even looks like! Nevertheless, we consider the elements as known. We name them and list them the periodic table.

For example, in 2003, scientists first observed element 115 (ununpentium, Uup) They bombarded americium-243 with calcium-248 ions and produced four atoms of Uup, which lived for less than one fifth of a second.

₂₀ ⁴⁸Ca + ₉₅²⁴³Am → ₁₁₅²⁸⁸Uup + 3 ₀¹n

It took until September 2013 for the discovery to be confirmed, and about 50 atoms have been synthesized to date.

We can predict the properties of Uup because the Periodic Table organizes elements according to their atomic number.

Answer:

Mg + 2HCl=== Mg(Cl)2 + H2

The Reaction is a single displacement reaction.

Yes!

This reaction obeys the law of conservation which states that for a closed system... Matter and energy transfer is constant.

Meaning that the Mass of products must equal mass of Reactants

To prove this

lets Calculate the Mass of reactants

24g + 73g=97g.

Mass of Products...

95g + x.

let's calculate the mass of Hydrogen produced.

Note: You can get it using any of the reactants... I'll use Magnesium

Now from the balanced reaction.... 1mole of Mg reacts to produce 1mole of Hydrogen

Moles of Mg=Mass/Molar Mass

Given Mass=24g

Molar mass of Mg=24

Mole of Mg =24/24

=1mole

Since Mole ratio of Mg and H2 is 1:1.... Therefore 1Mole of Hydrogen is produced too.

To get Mass of H2

Again

Mole=Mass/Mm

Known= 1mole of H2 isproduced

Mass of H2 =2g

Mole=Mass/Mm

Mass =Mole x Mm

= 1 x 2

=2g

Now

Total Mass of products is

95 +2 = 97g.

This is the same with the Mass of Reactants

So The Law of Conservation of Mass Holds.

The amount of heat released when 75 g of CH4O reacts is -1705.64 kJ.

The equation given is the balanced equation for the combustion of methanol (CH4O) with oxygen to form carbon dioxide (CO2) and water (H20). The value of ΔΗ given (-726 kJ) is the enthalpy change for the reaction, which represents the amount of heat released or absorbed when the reaction occurs.

To calculate the amount of heat released when 75 g of CH4O reacts, we need to use the equation: q = n x ΔΗ where,

We know that the molar mass of CH4O is 32.04 g/mol, so we can convert 75 g to moles using the following formula: n = m/M where,

So, n = 75 / 32.04 = 2.34 moles

Using this value of n in the equation above, we can calculate the heat released as q = 2.34 x -726 = -1705.64 kJ

Therefore, -1705.64 kJ of heat is released when 75 g of CH4O reacts.

Learn more about Enthalpy here:

https://brainly.com/question/16985375

#SPJ4

There is 2.43 mg of ascorbic acid in the 5.00-mL sample, or 48.6 mg/100 mL of orange juice.

Explanation:

For i2+na2s2o3 titration,

I2 + 2 S2O3^-2 <--> 2 I^-1 + S4O6^-2

13.82 mL of 0.07203 M Na2S2O3 was needed to reach the starch indicator end point.

Number of moles of Na2S2O3 = 13.82*0.07203= 0.9954546 millimoles.

So, number of moles of excess I2 = 0.9954546/2 = 0.4977273 millimoles.

For oxidizing the ascorbic acid to dehydroascorbic acid

C6H8O6 + I2 --> C6H6O6 + 2 H+ + 2 I-

SO 1mole of I2 read for 1 mole of C6H8O6.

Initial I2 used = 50*0.01023 = 0.5115 millimoles.

Number of moles of I2 used = 0.5115 - 0.4977273 = 0.0137727 millimoles.

Number of moles of C6H8O6 in5 ml of orange juice = 0.0137727 millimoles.

Weight of C6H8O6 in5 ml of orange juice = number of moles * molecular weight = 0.0137727 * 176 = 2.4239952 mg

In 100 ml of orange juice = 2.4239952/5) *100 = 48.479904 milligrams per 100 mL. is the answer.

To learn more about ascorbic acid visit;

https://brainly.com/question/14793819

#SPJ4

Answer:

64.2 L

Explanation:

In order to be able to calculate the volume of oxygen gas produced by this reaction, you need to know the conditions for pressure and temperature.

Since no mention of those conditions was made, I'll assume that the reaction takes place at STP, Standard Temperature and Pressure.

STP conditions are defined as a pressure of

100 kPa

and a temperature of

0

∘

C

. Under these conditions for pressure and temperature, one mole of any ideal gas occupies

22.7 L

- this is known as the molar volume of a gas at STP.

So, in order to find the volume of oxygen gas at STP, you need to know how many moles of oxygen are produced by this reaction.

First, we must compute the index of hydrogen deficiency, IHD, using the molecular formula of the compound [tex]C_{10}H_{14}O_{2}[/tex].

What is a spectrum data?

Spectrum data is data collected from spectroscopic experiments, which measure the interaction of matter with electromagnetic radiation. This data can be used to identify the chemical composition of a sample, as different elements and molecules absorb and emit radiation at different wavelengths.

Then, number of C atoms - [tex]\frac{number of atoms}{2} + 1[/tex]

                                          = [tex]10 + \frac{14}{2} + 1[/tex]

                                          = [tex]10 - 7 + 1[/tex]

                                          = [tex]4[/tex]

Based on the molecular structure, this tells us how many multiple bonds and rings the compound has.

This compound contains four unsaturated bonds. We can tell from the spectrum data that it is aromatic (chemical shifts above 6 comes from aromatic protons). Based on this, we can conclude that the structure of this compound contains a benzene ring. Four IHD are found in the benzene ring, one from the ring and three from double bonds.

Following that, IR spectrum data revealed that absorption on [tex]3150-2850 cm^{-1}[/tex] indicated hybridised CH bonds.

The following chemical shifts are observed in the NMR spectrum data:

On 1,4ppm, it becomes a 6H triplet. It has two protons in its neighbourhood because it is a triplet, and it comes from [tex]CH_{3}(1)[/tex]. This group must be linked to the [tex]CH_{2}(2)[/tex].

A quartet on 4,0ppm, belongs to 4H from [tex]CH_{2}(2)[/tex].  It has 3 protons in neighborhood stop it it attached to the [tex]CH_{3}(1)[/tex] and singlet on 6,8ppm comes of aromatic protons, 4H (3).

Based on the [tex]^{1} HNMR[/tex] spectrum data, we can only attach the two O atoms to the benzene ring and the [tex]CH_{2}(2)[/tex] group.

To know more about spectrum data,

https://brainly.com/question/15178018

#SPJ4

Answer:

PROPYL ETHANOATE (OR PROPYL ACETATE)

Explanation:

1st step: Identify the functional group of the compound.

             COO is present, hence it is an ester.

2nd step: Split up the compound into CH3COOH and CH3CH2CH2OH.

                 Comes from ethanoic acid and propanol

3rd step: Join the names of the alcohol and the carboxylic acid together.

               Hence, propyl ethanoate.

D.) endothermic reaction

A balanced nuclear equation for power generation by nuclear fission is given below:

The process of nuclear fission involves the splitting of an atom's nucleus into two or more smaller nuclei. Even by the energetic standards of radioactive decay, the fission process releases a very high quantity of energy and frequently results in gamma photons.

Nuclear fission is applied in nuclear power generation in a nuclear reactor.

The fissionable nuclear material is separated in the nuclear reactor so that a critical mass cannot exist, and the neutron flux and absorption are controlled to stop the fission reactions. The energy released during fission processes in a nuclear reactor used to generate electricity is trapped as thermal energy and used to heat water and create steam. The steam is utilized to turn a turbine, which powers an electricity-generating generator.

Learn more about nuclear fission at: https://brainly.com/question/3992688

#SPJ1

The process of forcing liquid at high pressure into rocks, deep holes in the ground, etc. in order to force open existing cracks and take out oil or gas.

ANSWER :-

❥Fracking..!!!

Fracking is the process of drilling down into the earth before a high-pressure water mixture is directed at the rock to release the gas inside.

Hope it helps ya!❤

Answer:

7.01 hope this is right !

Explanation:

This problem can be summarized thusly:

qlost by copper = qgained by water + qgained by calorimeter

2) Therefore:

(610. g) (95.3 °C − x) (0.387 J g¯1 K¯1) = (45.0 g) (x − 36.5 °C) (4.184 J g¯1 °C¯1) + [(10.0 J/K) (x − 36.5 °C)]

Comment: The K and the °C cancel because the °C in this problem is a temperature difference (not one single specific value) and the "size" of one K = one °C.

22497.471 − 236.07x = 198.28x − 7237.22

424.35x = 29734.691

x = 70.1 °C

In the modern periodic table, reactivity increases when moving from left to right in the third period because metallic character decreases along a period.

The elements in the modern periodic table are arranged in  7 periods and 18 groups in a certain manner such that along a period , the metallic character of the element decreases and non-metallic character increases while on moving from top to bottom in a group, the metallic character increases and non-metallic character decreases.

The metallic character of elements depends upon its ability to lose electrons. Along a group, the size of atom increases and gradually the nuclear pull decreases so they can readily lose electrons but across a period, atomic size decreases and nuclear pull increases so they cannot lose electrons easily.

To know more about reactivity of elements here

https://brainly.com/question/22081633

#SPJ4

The gas in a 250.0 mL piston experiences a change in pressure from 1.00 atm to 4.90 atm. 56.2 ml is the new volume (in mL) assuming the moles of gas and temperature are held constant.

Boyle's law states that at a given temperature, the volume of a gas and its pressure are inversely proportional.

Robert A. Boyle discovered the law in 1662, which states that at a constant temperature, the volume of a gas is inversely proportional to the pressure exerted by the gas.

Given:

Initial volume (V₁) = 250 mL

Initial pressure (P₁) = 1.00 atm

Final volume (V₂) = ?

Final pressure (P₂) = 4.45 atm

Assuming the gas has an ideal behavior, we can find the final volume by using Boyle's law as follows:

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1.00 atm × 250 mL / 4.45 atm

V₂ = 56.2 ml

Thus, 56.2 ml  is the new volume (in mL) assuming the moles of gas and temperature are held constant.

To learn more about the Boyle's law, follow the link;

https://brainly.com/question/30367067

#SPJ1

Two covalent bonds are formed by oxygen to complete their octet.

An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or sharing pairs are the names given to these electron pairs. Covalent bonding is the stable equilibrium of the attractive and repulsive forces between atoms when they share electrons.

In chemistry, an octet is an arrangement of eight electrons in the outer electron shell of a noble gas atom. The relative inertness of noble gases and the chemical behaviour of several other elements are attributed to this structure.

The chemical element oxygen has an atomic number of 8. (it has eight protons in its nucleus). At normal temperatures and pressures, oxygen transforms into the chemical compound (O2) of two atoms, which is a colourless gas.

To know more about the covalent bond, check out:

https://brainly.com/question/3447218

#SPJ1

Answer:

Energy transfer between the particles in solids, liquids, and gases can explain how warm matter outside a cup can cause a cold liquid inside the cup to warm up.

Explanation:

Answer:

The drink in the regular cup warms up.

Explanation:

The reason why it warms up is because the cup is colder than room temperature and melts another reason why the drink in the regular cup warms up is because when we breathe out hot air is coming out soo that also makes the drink warmer.

Answer:

An absolutely interesting occurrence is light. Despite the fact that it is well recognized that light is an electromagnetic, it is frequently more practical to characterise or characterize light in other ways than only as a wave.

For instance, light is frequently depicted as anything other than a wave in spectroscopy and fundamental physics.

Similar to how we replicate oceans moving through water, the Wave Model illustrates how light propagates. Colors can be explained using the Wave Model by including information about wavelength.

The Light Wave Model. Similar to how we simulate ocean waves moving across water, the Wave Model illustrates how light propagates. We can explain qualities of light by imagining it to be an oscillating wave.

To know more about Light click here

brainly.com/question/15200315

#SPJ4

Answer:

wavelengths

Explanation:

hope it helps

thanks

Wavelengths are being recorded by the machine by using IR spectrography. Therefore, option B is correct.

Infrared (IR) spectroscopy is also known as infrared spectrometry. It is a technique that is used to analyze and identify chemical compounds based on their absorption or emission of infrared radiation.

Infrared radiation lies in the electromagnetic spectrum between visible light and microwave radiation. It has longer wavelengths and lower frequencies than visible light. When infrared radiation passes through a sample, certain chemical bonds in the sample absorb specific frequencies of infrared light.

Learn more about spectrography, here:

https://brainly.com/question/30917323

#SPJ2

Answer:

i think that it is C. both

Explanation:

The substance that he will have the most will be sodium chloride.

More than 70% of the surface of the Earth is covered by seawater, the liquid that makes up the oceans and seas. 96.5 percent of seawater is made up of pure water, 2.5 percent salt, and minor amounts of dissolved inorganic and organic compounds, particles, and a few atmospheric gases.

When a chemist analyzes the composition of a sample and heats it to cause the water to evaporate, he is left with the solid substances that had been dissolved in the sample. Sodium chloride is the most significant salt that is created by ocean water. He next goes through a series of steps to separate the solid materials from one another. The highest substance found in ocean water, according to his measurements, is salt, specifically sodium chloride.

Learn more about sodium chloride

brainly.com/question/9811771

#SPJ4

Answer:

69%

Explanation:

Percent yield = ?

Theoretical yield = 985 grams

Experimental Yield = 680 grams

Percent Yield = Experimental Yield / Theoretical Yield * 100

Percent Yield = 680 / 985  * 1 00

Percent Yield = 0.690 * 100 = 69%

Answer:

Explanation:

25%

Answer:

In 2C2H6, The C= 4 and H= 12