There will be several advantages to equipment standardization. Digital solutions accelerate standardization by giving an overview of the field equipment.
What benefit does using equipment provide?By using the most effective and efficient procedures, they aid in accelerating the rate of output. Reduce construction costs overall, especially for big contracts. A machine or piece of equipment can effortlessly perform tasks that are too difficult or delicate for human muscles to complete.
What purposes do tools and equipment serve?In general, they are used to assemble or disassemble objects (such as hammers and nail guns) (e.g., jackhammers and saws). Hand tools and power tools are two common categories for tools. All non-powered instruments are considered hand tools, such as such as pliers and hammers.
To know more about Equipment Sing visit:-
https://brainly.com/question/29667828
#SPJ1
Classify the variable as nominal-level, ordinal-level, interval-level, or ratio-level measurement. Number of gallons of water in a swimming pool
The number of gallons in a swimming pool in the given question can be classified as a ratio level measurement.
What is ratio level measurement?The highest of the four hierarchical levels of measurement is the ratio level measurement. Data recording accuracy is determined by the levels or scales of measurement. The measurement becomes more difficult as the level increases.
The features of the other 3 levels are all present in the ratio level. At the ratio level, values can take on a true zero, be categorised, ordered, have equal intervals, and more.
While interval and ratio variables are quantitative variables, nominal and ordinal variables fall under the category of categorical variables. Quantitative data allows for a much wider range of statistical tests than categorical data.
Learn more about ratio level measurement
https://brainly.com/question/14739567
#SPJ4
12. Which of the following letter doesn't still the same when its viewed
in a mirror?
Α. Ε
B. W
C.S.
D. B
Answer:
the correct answer is option B. W
Answer:
it is b and w
Explanation:
pls mark as brainlist
Determine the required diameter of a steel transmission shaft 10 meters in length and material yield strength 350 MPa in order to resist a torque of up to 500 N.m. The shaft is supported by frictionless bearings at its ends. Design the shaft using the maximum shear stress theory, and selecting a factor of safety of 1.5. Neglect shaft weight.
Answer:
0.02795 m
Explanation:
Neglecting shaft weight Design the shaft using maximum shear stress theory and determine the required diameter
factor of safety = 1.5
length of shaft = 10 meters
material yield strength = 350 MPa
Torque = 500 N.m
The required shaft diameter = 0.02795 m
attached below is a detailed solution of the problem
What are the two major grains found on ALL lumber?
The two major grains found on all lumber are the longitudinal grain and the radial grain.
The longitudinal grain runs parallel to the length of the board, while the radial grain runs perpendicular to the length of the board.
What is the Longitudinal Grain?The longitudinal grain, also known as the "edge grain," runs parallel to the length of the board.
This grain is created by the growth rings of the tree, which are formed by the tree's annual growth.
When a tree is cut down and milled into lumber, the edge grain is exposed on the edges of the board. This grain is typically considered to be the strongest and most stable of the two grains.
Read more about grain here:
https://brainly.com/question/1394041
#SPJ1
The statements below refer to the design and operation of the power sub-system on a spacecraft. Select all those statements that are correct.
the battery and ODC input voltages, as well as the main parameters for the power source, fireworks, relays, anti-static resistances, etc. The statements below refer to the design and operation of the power sub-system on a spacecraft.
How do spaceship electric power systems work?Solar panels on these spacecraft convert solar energy into the electricity they require for propulsion. The electricity generated by the solar panels is used to recharge a battery within the spacecraft. These batteries can power the spaceship even as it is traveling away from the sun.
What make up a spacecraft's subsystems?The engine, temperature management, power and power distribution, attitude control, telemetry command and control, transmitters/antenna, computers/on-board processing/software, and structural components are only a few of the many subsystems that make up a spaceship bus.
To know more about spacecraft's subsystems visit:-
https://brainly.com/question/29610872
#SPJ1
Tech A says that a safety data sheet (SDS) contains information on procedures to repair a vehicle. Tech B says that you only need an SDS after an accident occurs. Who is correct
According to the question of vehicle, tech B is correct.
What is vehicle?
Vehicle is a general term used to describe any mode of transportation that carries people or goods from one place to another. Examples of vehicles include cars, buses, boats, planes, trains, bicycles, and motorcycles. Vehicle is a noun that can refer to any type of transportation, either for people or for cargo. Vehicles are powered by various sources, such as fuel, electricity, pedals, or sails.
An SDS is used to document any hazardous materials that may have been released during an accident, as well as to provide instructions for cleaning up and disposing of the hazardous material. It does not provide instructions on how to repair a vehicle.
To learn more about vehicle
https://brainly.com/question/28539698
#SPJ4
Consider the velocity field v={−4yti+2xtj}m/s for the following parts
The velocity field isn't conservative, though.
What exactly is Velocity ?
Velocity is the direction at which an item is moving and serves as a measure of the rate at which its location is changing as seen from a particular point of view and as measured by a specific unit of time (for example, 60 km/h northbound). In kinematics, the area of classical physics that deals with the motion of bodies, speed is a basic idea.
A physical scalar quantity called velocity must have both a magnitude and a direction in order to be characterized. Speed is the scalar absolute value (intensity) of velocity; it is a coherent basic determinant whose quantity is measured in metres per second (m/s or m/s1) in the SI (measurement units).
To know more about Velocity
https://brainly.com/question/18084516
#SPJ4
Exactly 5. 00 mL aliquots of a solution containing Phenobarbital were measured into 50. 00ml volumetric flasks and made basic with KOH.
The following volumes of a standard solution of Phenobarbital containing 2. 00 µg/ml of Phenobarbital were then introduced into each flask and the mixture was diluted to volume: 0. 00, 0. 500,1. 000, 1. 50, and 2. 00ml.
The fluorescence of each of these solutions was measured with a fluorometer, which gave volumes of 3. 26, 4. 80, 6. 41, 8. 02, and 9. 56 respectively.
(a) Pot the data.
(b) Using the plot from (a) calculate the concentration of Phenobarbital in the unknown.
(c) Derive a least-squares equation for the data.
(d) Find the concentration of Phenobarbital from the equation in (c)
(e) Calculate a standard deviation for the concentration obtained in (d)
The data can be plotted as a standard curve. The concentration of Phenobarbital in the unknown can be determined by finding the point on the curve where the fluorescence of the solution intersects the x-axis.
Pot the dataa) The data is plotted in form of a standard curve, which is a graph of the fluorescence of the solutions versus the volume of the standard solution added.
Using the plot from (a) calculate the concentration of Phenobarbital in the unknown.b) By drawing a line of best fit through the data points, we can find the point where the line intersects the x-axis, the x-intercept, which will give us the concentration of phenobarbital in the unknown.
Derive a least-squares equation for the data.c) The least-squares equation is a mathematical representation of the line of best fit. It is used to find the relationship between two variables by minimizing the sum of the squared residuals between the data points and the line.
Find the concentration of Phenobarbital from the equation in (c)d) Using the equation obtained in c), we can calculate the concentration of phenobarbital in the unknown.
Calculate a standard deviation for the concentration obtained in (d)e) By using the residuals of the line of best fit, we can calculate the standard deviation of the concentration obtained in d). This will give us an idea of how much the concentration of phenobarbital in the unknown deviates from the actual value.
The least-squares equation can be found by fitting a line to the data points. The concentration of Phenobarbital can then be determined using this equation. The standard deviation for the concentration can be calculated using the residuals from the line of best fit.
Learn more about Phenobarbital here:
brainly.com/question/1939753
#SPJ4
An inverter or ac module is required to automatically ________ its output when utility power is lost.
An inverter or ac module is required to automatically switchover its output when utility power is lost.
What is an inverter?
An inverter is an electrical device that converts direct current (DC) to alternating current (AC). It is a type of power electronic converter that is used to convert low-voltage DC electricity from sources such as batteries or solar panels into a higher voltage AC output. Inverters allow for the use of DC power sources such as batteries to power AC appliances, and are commonly used in recreational vehicles and off-grid energy systems. They are also used in adjustable speed drives, uninterruptible power supplies, and in many consumer electronics applications. Inverters come in a variety of sizes ranging from small microcontrollers that control a single appliance, to large industrial models that are used to power entire buildings.
To learn more about inverter
https://brainly.com/question/28086004
#SPJ4
Verify that the indicated function y=ϕ(x)y=ϕ(x)
is an explicit solution of the given first-order differential
equation. By considering ϕϕ simply as a function, give its domain. Then by considering ϕϕ as a
solution of the differential equation, give at least one interval II of definition.
y′=25+y2;y=5tan5xy ′ =25+y 2 ;y=5tan5x
After considering ϕϕ simply as a function, its domain is ⇒ [-4 , ∞).
What is differential equation?When one or more functions and their derivatives are included in a mathematical equation, it is referred to as a differential equation. A function's derivatives at a given point determine how quickly the function will change.
Physicists, engineers, and biologists use it most frequently. Differential equations are primarily used to analyse solutions that satisfy the equations as well as the characteristics of the solutions. The differential equation can be solved in a variety of ways, but one of the simplest is by using explicit formulas.
y = x + 6√(x + 4)
⇒ y' = 1 + 6[ 1/(2√(x + 4))] since d/dx xn = nxn-1 , d/dx √x = 1/(2√x)
⇒ y' = 1 + 3/√(x + 4)
(y -x)y' = (6√(x + 4))(1 + 3/√(x + 4)) = 6√(x + 4) + 18
y-x+18 = 6√(x + 4) + 18
ϕ(x) = x + 6√(x + 4)
Domain ⇒ x + 4 >= 0 ⇒ x >= -4
⇒ Domain ⇒ [-4 , ∞)
Learn more about Domain
https://brainly.com/question/28135761
#SPJ4
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of
A property's roof is twenty years old and has not been replaced. This condition would most likely be considered to be an example of curable physical deterioration.
What is Curable physical deterioration?
Curable deterioration is a type of deterioration that can be cured economically. The economic feasibility of a property is indicated if the increase in value exceeds or is equal to the anticipated cost of repairing the property. The cost of replacing or restoring the item is used as a reasonable measure of curable deterioration.
Estimating the value of items that need to be repaired, such as window replacements, repainting, weatherstripping, roof repair, loose tile fixing, faulty wiring, and heating or cooling system repairs, is part of measuring curable deterioration.
Only include the items listed above if the increase in property value will cover the cost of repairs. For example, if roof repair and loose tile repair are estimated to cost $8,000, a prospective buyer can reduce their offer price by the same amount to cover the cost of doing such repairs.
To learn more about roofs, visit: https://brainly.com/question/29517525
#SPJ4
Find the time function corresponding to each of the following Laplace transforms using partial fraction expansions: (a) = F(s) = 1/s(s+1) (b) F(s) = 5/s(s+1)(s+5) (c) F(s) = 3s+2/s^2 + 2s + 10
The time function corresponding to each of the following Laplace transforms using partial fraction expansions will be:
(a) f(t) = e^(-t) + te^(-t)
(b) f(t) = 5e^(-t) + 5te^(-t) - 10e^(-5t)
(c) f(t) = 3e^(-t) + (2t+1)e^(-t) - 2e^(-2t) - 5te^(-2t)
What is fraction?
A fraction is a type of mathematical expression that represents a part of a whole. It is written as a ratio of two numbers, with a line separating them. For example, the fraction 1/2 represents one part of a whole that has been divided into two equal parts. Fractions are used to express amounts that are less than one, such as a half, a quarter, or a third. They can also be used to express amounts greater than one, such as two thirds, three quarters, or four fifths. Fractions are used in many different areas of mathematics, such as addition, subtraction, multiplication and division.
To learn more about fraction
https://brainly.com/question/20038994
#SPJ4
A flow i decribed by velocity field V=ayibxj where a = 2 (m/) and b = 1 (1/) , coordinate are meaured in meter. A) Obtain the equation for the treamline paing through the point (2,5). B) At t=2 , what are the coordinate of the particle that paed through point (0,4) at t=0. C) At t=3 , what are the coordinate of the particle that paed through point (1,4. 25) 2 econd earlier
The equation for the streamline passing through point (2,5) is y-5=b/a(x-2).
What is streamline?Streamlining is a process of simplifying or improving a process or system to increase efficiency, reduce complexity, and reduce costs. It can involve reorganizing, restructuring, rearranging, or redefining a system, procedure, or process to make it more efficient and productive.
B) At t=2, the coordinate of the particle that passed through point (0,4) at t=0 is (6,7). This is because since the velocity field is V = ayibxj, the particle will experience a displacement of 2a in the x-direction and 2b in the y-direction in the span of 2 seconds. Thus, the displacement of the particle is (2a,2b) = (4,2). Adding this to the initial position (0,4), the new position of the particle is (4,6).
C) At t=3, the coordinate of the particle that passed through point (1,4.25) 2 seconds earlier is (7.25,6.25). This is because since the velocity field is V = ayibxj, the particle will experience a displacement of 3a in the x-direction and 3b in the y-direction in the span of 3 seconds. Thus, the displacement of the particle is (3a, 3b) = (6,3). Adding this to the initial position (1,4.25), the new position of the particle is (7,7.25).
To learn more about streamline
https://brainly.com/question/22453879
#SPJ4
The system ________ can communicate with each other and adjust system operation to match the heat load and operating conditions.
The system automatically can communicate with each other and adjust system operation to match the heat load and operating conditions.
What is system operation?
System operation is the process of managing, controlling, and monitoring the operations of a computer system or network. It encompasses the planning and implementation of system operations, including the coordination of hardware, software, and communication components. System operation includes activities such as system configuration, system monitoring, performance tuning, system backup, system recovery, and system maintenance. System operation ensures that the system or network is secure, reliable, and available to users. It also involves troubleshooting and responding to incidents, analyzing system performance, and identifying areas for improvement. System operation is critical to the success of any organization, as it ensures the availability, reliability, and security of the system or network.
To learn more about system operation
https://brainly.com/question/29990235
#SPJ4
What is the difference between cinema and theatre ?? I want the difference
Answer:
The main difference between theatre and cinema is that theatre involves live performances like plays, opera, ballet, and musical theatre, while cinema involves films.
Theatre is a building or outdoor area that houses dramatic presentations, and stage entertainments. In British English, cinema refers to a building that contains an auditorium for viewing films – this is equivalent for movie theatre in American English.
Explanation:
Similarities between theatre and movies
Both movies and theatre focus on social evils and problems and represent them to society through play and cinema. In both, the purpose of the cases is to bring positive changes in society. ...
Both theater plays and movies are forms of entertainment that allow an audience to enter different worlds. ...
Both theater plays and movies are forms of entertainment
Answer:
Theatre typically involves live performances, while cinema usually contains a moving picture that is prerecorded or premade and being projected.
Examples of theatre include:
BalletsPlaysMusicalsExamples of cinema include:
MoviesShort FilmsTo learn more about the difference between cinema and theatre, check out the link below:
https://brainly.com/question/26197760
Why is it critical for the upper and lower end sections of an engine to work perfectly together
Answer:
It is critical for the upper and lower end sections of an engine to work perfectly together because they are responsible for converting fuel into motion, which is necessary for the engine to operate effectively.
The upper end section of an engine includes the cylinder head and valves, which are responsible for controlling the flow of fuel and air into the engine. The lower end section of an engine includes the crankshaft, connecting rod, and pistons, which are responsible for converting the fuel's energy into rotational motion.
If the upper and lower end sections of an engine are not working perfectly together, it can lead to a variety of problems, including reduced engine performance, reduced fuel efficiency, and increased emissions. It is therefore critical for the upper and lower end sections to be carefully designed and calibrated to work together seamlessly in order to ensure the optimal performance of the engine.
Question 4: Princeton has a longstanding commitment to service and civic engagement. Tell us how your story intersects (or will intersect) with these ideals.
Princeton has a long tradition of service and civic engagement, and I am proud to be part of this legacy.
I have always been passionate about giving back to my community and helping those in need. I have participated in volunteer programs to help feed the homeless, tutor disadvantaged children, and provide other forms of community service.
I am also committed to making a positive impact on the environment by taking part in various initiatives to reduce my carbon footprint. I am currently a member of the Princeton Environmental Action Group and will be taking part in their upcoming campaigns to reduce waste and promote sustainable practices on campus.
I am also part of the Princeton Student Climate Initiative, which is dedicated to raising awareness about climate change and advocating for policy changes that will help protect the environment. I look forward to continuing my commitment to service and civic engagement during my time at Princeton, and I know that by working together, we can make a positive difference in our community.
Learn more about Princeton :
https://brainly.com/question/30076023
#SPJ4
What is the difference between contact relay and communication relay
Answer: The main difference between contact relays and communication relays is the type of signals that they are designed to handle, with contact relays being used to control the flow of electricity in a circuit and communication relays being used to transmit data or signals from one location to another.
Explanation: The main difference between contact relays and communication relays is the type of signals that they are designed to handle. Contact relays are used to control the flow of electricity in a circuit by opening and closing electrical contacts, while communication relays are used to transmit data or signals from one location to another.Contact relays are typically used in applications where it is necessary to switch electrical circuits on and off, such as in control panels and automated systems. They are usually designed to handle relatively low-frequency electrical signals and are typically not suitable for transmitting data or high-frequency signals.On the other hand, communication relays are used to transmit data or signals from one location to another, and are typically designed to handle a wide range of frequencies and data types. They can be used to transmit voice, data, and video signals over a variety of mediums, including wire, fiber optic cables, and wireless transmission.
How are laws and regulations different from one another? A, Laws are long-standing, while regulations can be modified quickly Laws are long-standing, while regulations can be modified quickly B, Laws can be modified quickly, while regulations are long-standing Laws can be modified quickly, while regulations are long-standing C, Laws are governed by the federal government while regulations are governed by the state government Laws are governed by the federal government while regulations are governed by the state government D, Violators of laws are taken to criminal court while violators of regulations are taken to civil court. Violators of laws are taken to criminal court while violators of regulations are taken to civil court.
Answer:
Terms in this set (18)
Original
Which agency is responsible for managing Florida's hunting laws and regulations?
*The Fish & Wildlife Conservation Commission
*The US Fish & Wildlife Service
*The International Hunter Education Association
*The National Rifle Association
The Fish & Wildlife Conservation Commission
How are laws and regulations different from one another?
*Laws are long-standing, while regulations can be modified quickly
*Laws can be modified quickly, while regulations are long-standing
*Laws are governed by the federal government while regulations are governed by the state government
*Violators of laws are taken to criminal court while violators of regulations are taken to civil court.
Laws are long-standing, while regulations can be modified quickly
Why were hunting laws and regulations initially enacted?
*To help market hunters get enough game to survive
*To protect wildlife from over hunting and market hunting
*To help hunters get a fair price for food from wild game
*To protect wildlife from fair chase and conservation efforts
To protect wildlife from over hunting and market huntingExplanation:
A force F having a magnitude of F = 165 N acts along the diagonal of the parallelepiped. Determine the moment of F about point A, using MA =rB x F and MA =rC x F.
Therefore, (-26.46i-52.92k) Nm is the answer to the presented problem of force.
What is a force, exactly?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
Which four primary forces are there?Any of the four fundamental forces in physics—gravitational, electromagnetic, strong, and weak—that control how things or particles interact as well as how some particles decay—is referred to as a fundamental force, also known as a fundamental interaction. These fundamental forces are the source of all known natural forces.
to know more about force here:
brainly.com/question/13191643
#SPJ1
Where is the airhorn of a 2014 kenworth t700?
Tactical ventilation should only be performed when the fire attack hoselines and teams are in place and ready to advance toward the fire. T/F
It is TRUE that the Tactical ventilation should be performed only when the fire attack hoselines and teams are ready to advance toward the fire.
What is Tactical ventilation?
Through purposeful flow path management, the overarching goal of all forms of tactical ventilation is to improve interior tenability for occupants and firefighters.
Flow path management for control and extinguishment is best accomplished by placing ventilation openings as close to the source fire as possible (e.g., not in a remote location) and working in collaboration with the fire attack team (e.g., vent ahead of rather than behind the attack team).
Firefighters must constantly control their environment with hose stream techniques when using ventilation tactics and interior attack to cool and dilute the highly combustible smoke.
To know more about Tactical ventilation, visit: https://brainly.com/question/27841064
#SPJ4
What is the 8-digit binary value of the last octet of the IPv4 address 172.17.10.7? O 00000111 O 01100110 O 00001111 O 00000110 Question 10 1 pts A site administrator has been told that a particular network at the site must accommodate 126 hosts. Which subnet mask would be used that contains the required number of host bits? 255.255.255.128 255.255.255.0 O 255.255.255.224 O 255.255.255.240 Question 11 1 pts In which alternative to DHCPv6 does a router dynamically provide IPv6 configuration information to hosts? O SLAAC O ARP O ICMPv6 O EU1-64
The router will be informed of the appropriate host ID by the last octet, which is the octet of the sub-net mask 255.255.255.0.
In the IPv4 component of the address, one octet is referred to as x and is a decimal value between 0 and 255. Periods are used to separate the octets. Three periods and four octets are required in the IPv4 component of the address. People may have also heard the term "octets" used to describe the four numbers that make up an IP address. The right name for the four distinct digits that make up an IP address is an octet. The third octet of sub-netting is used to specify specific sub nets of network 150.150.0.0. In the example in the image, each sub-net number has a different value in the third byte, signifying that it is a separate sub-net number.
Learn more about Octets here:
https://brainly.com/question/28276191
#SPJ4
Technician A says it is your duty to fight a fire to the death to save property. Technician B says do not fight a fire unless you can do so safely. Who is correct
Tech B is correct, as the firefighters should not risk their lives unless they can do so safely.
What is a Firefighter?
A firefighter, also known as a fireman, is a highly trained individual who works to fight and extinguish fires. They also work to prevent fires, serve as emergency medical technicians (EMT), and investigate fire causes.
Because a firefighter is almost always the first official "on the scene" of a fire, car accident, or other emergency, they are sometimes referred to as "first responders." Some firefighters work as professionals, while others volunteer in their communities.
There are four primary responsibilities and duties: putting out fires, rescuing and caring for the sick and injured, working to prevent future fires, and investigating the causes of fires, particularly if arson is suspected.
To know more about Firefighter, visit: https://brainly.com/question/14252935
#SPJ4
A rigid pavement on a new interstate with 3 lanes in each direction has been conservatively designed with a 12-inch slab, an Ec of 5.5 million psi, a concrete modulus of rupture of 700 psi, a load transfer coefficient of 3.0, an initial PSI of 4.5, and a TSI of 2.5. The overall standard deviation is 0.35, the modulus of subgrade reaction is 290 lb/in3, and the drainage coefficient is 0.9. The pavement was designed for 600 30-kip tandem axles per day and 1400 20-kip single axle loads per day total for all 3 lanes. If the desired reliability is 90%, how long will the pavement last in years
The pavement will last between 41 and 50 years with a reliability of 90%.
A road surface, also known as pavement, is a durable surface material that is laid down on an area intended to support vehicular or pedestrian traffic, such as a road or walkway.
First, calculate the number of equivalent single axle loads (ESALS):
ESALS = 600*30 + 1400*20 = 55600.
Next, calculate the design life (L) using the formula: L =
(ESALS/18000)^(1/TSI) * (Ec/PSI)^(-1/2*SD).
Plugging in the values,
L = (55600/18000)^(1/2.5) * (5.5 x 10^6/4.5)^(-1/0.7) = 41.8.
Lastly, calculate the reliability (R) using the formula:
R = (1-LT^(-1/2))*100.
Calculating for a pavement life of 41 years and 50 years gives a reliability of 90% for both values.
For more questions like Pavement click the link below:
https://brainly.com/question/14249997
#SPJ4
Which of the following statements explain the difference between a diesel electrician and a diesel mechanic?
Option A. A diesel electrician works on the electrical systems of diesel engines, while a diesel mechanic works on the mechanical systems of diesel engines.
This means that the electrician focuses on the wiring, electronics, and computer systems, while the mechanic focuses on the engine parts, fuel systems, and other components.Differences Between Diesel Electricians and Diesel MechanicsA diesel electrician focuses on the wiring, electronics, and computer systems of diesel engines, while a diesel mechanic is responsible for the engine parts, fuel systems, and other components.
The electrician is trained in the electrical systems of diesel engines, and is able to diagnose, troubleshoot and repair any electrical issues. The mechanic, on the other hand, is responsible for maintaining, troubleshooting, and repairing the mechanical systems of diesel engines. This includes the engine parts, fuel systems, and other components.Both positions require a specific set of skills, and both are necessary to ensure the efficient functioning of diesel engines.
Learn more about diesel electrician: https://brainly.com/question/8118353
#SPJ4
What is a transition? A. An animation that happens on a single slide B. An outline format that uses roman numerals C. An image file imported to a title slide D. An effect that happens between slides Please select the best answer from the choices provided A B C D
Answer:
its c
Explanation:
Can space debris take out a whole state
Which workplaces are common to both the Engineering and Technology pathway and the Science and Math pathway?
a) laboratories and ships
b) parks and radio stations
c) construction sites and zoos
d) offices and weather stations
The common workplace for both science and math pathways, with engineering and technology in laboratories and ships. Thus, option A is correct.
What is a workplace?A workplace is given as the location or the place at which the employee are performing their jobs and tasks.
The science or technology-mediated employees are related to research where they perform the tests in laboratories, as well as the ships are the location for the engineering and the math candidates for the analysis of the studies and to perform the job.
Hence, the location in the workplace common for both engineering and technology candidates has been the laboratories and the ships. Thus, option A is correct.
Learn more about workplaces, here:
https://brainly.com/question/1406228
#SPJ2
Gear B supplies 15 kW of power, while gears A, C and D withdraw 6 kW, 4 kW and 5 kW, respectively. If the shaft is made of steel with the allowable shear stress of tau_allow = 75 MPa, and the relative angle of twist between any two gears cannot exceed 0.05 rad. determine the required minimum diameter d of the shaft to the nearest millimeter. The shaft is rotating at 600 rpm.
Using the formula of shear stress, the minimum required diameter is 0.81mm
What is Shear StressShear stress is a force that causes two objects to slide past each other in opposite directions. It is the force per unit area of the surface on which the force is applied. Shear stress is often caused by two objects rubbing against each other, such as a car tire sliding on the road. It can also be caused by wind, gravity, or other forces.
The shear stress on the shaft can be calculated using the formula:
τ(allow) = P/(2*π*d*J)
where P is the total power transferred by the shaft, d is the diameter of the shaft, and J is the polar moment of inertia.
J = π*d⁴/32
Substituting the given values,
τ(allow) = (15 + 6 + 4 + 5)/(2*π*d*π*d⁴/32)
d = √[32*(15 + 6 + 4 + 5)/(τ(allow)*2*π²)]
d = √[32*(30)/(75*2*π²)]
d = 0.81mm
The minimum required diameter of the shaft is 0.81 mm to the nearest millimeter.
Learn more shear stress here;
https://brainly.com/question/13670232
#SPJ1