Suppose a system of two linear equations has one solution. What must be true about the graphs of the two equations? They intersect at one point. They intersect at two points. They have the same slope. They have the same y-intercept.

Answers

Answer 1

The graphs of the two equations in a system with one solution must intersect at one point and have different slopes and different y-intercepts.

If a system of two linear equations has one solution, it means that the two equations represent two lines that intersect at a single point. Therefore, the correct statement is "They intersect at one point."

When two lines intersect at one point, it implies that they have different slopes and different y-intercepts. The fact that they intersect at only one point ensures that they are not parallel lines, which would never intersect. Also, they cannot be the same line, as they would intersect at infinitely many points.

For more such questions on graphs

https://brainly.com/question/29199338

#SPJ8


Related Questions

Question 9 Evaluate the indefinite integral by using integration by substitution S2³ (2+2) dz O (¹+2)+C (¹+2) + C O none of these 0 (25+2x)³ +C 80 (4x³+2)³ +C (4x³ + 2) + C (5+2x) + C 0 O 32 27

Answers

indefinite integral (2x^3)(2+2x)^3 dx = 2x^4 + (12/5)x^5 + (4/5)x^6 + (4/7)x^7 + C,

where C represents the constant of integration.

Let's substitute u = 2 + 2x. Taking the derivative of u with respect to x, we have du/dx = 2.

Rearranging this equation, we get dx = du/2.

Now,  substitute the variables in the integral:

∫(2x^3)(2+2x)^3 dx = ∫(2x^3)(u)^3 (du/2)

= (1/2) ∫x^3 u^3 du

We can simplify this further:

(1/2) ∫(x^3)(u^3) du = (1/2) ∫(x^3)((2+2x)^3) du

transformed the original integral into a new integral with respect to u.

To evaluate this integral expand the expression (2+2x)^3, simplify, and integrate.

∫(x^3)((2+2x)^3) du = ∫(x^3)(8 + 24x + 24x^2 + 8x^3) du

= ∫(8x^3 + 24x^4 + 24x^5 + 8x^6) du

Integrating each term separately,

(1/2)(8/4)x^4 + (1/2)(24/5)x^5 + (1/2)(24/6)x^6 + (1/2)(8/7)x^7 + C

Simplifying and combining like terms, we have:

(4/2)x^4 + (12/5)x^5 + (4/5)x^6 + (4/7)x^7 + C

= 2x^4 + (12/5)x^5 + (4/5)x^6 + (4/7)x^7 + C

Therefore, the indefinite integral of (2x^3)(2+2x)^3 dx is equal to 2x^4 + (12/5)x^5 + (4/5)x^6 + (4/7)x^7 + C,

where C represents the constant of integration.

learn more about integral

brainly.com/question/31109342

#SPJ11

A contract requires lease payments of $700 at the beginning of every month for 3 years. a. What is the present value of the contract if the lease rate is 4.75% compounded annually? $0.00 Round to the nearest cent b. What is the present value of the contract if the lease rate is 4.75% compounded monthly? Round to the nearest cent

Answers

The present value of the contract is $0.00 when compounded annually and rounded to the nearest cent. When compounded monthly, the present value is also rounded to the nearest cent.

What is the present value of the contract if the lease rate is 4.75% compounded annually?

To calculate the present value of the contract compounded annually, we can use the formula for the present value of an ordinary annuity.

Given the lease payments of $700 at the beginning of each month for 3 years, and a lease rate of 4.75% compounded annually, the present value is calculated to be $0.00 when rounded to the nearest cent.

When the lease rate is compounded monthly, we need to adjust the formula and calculate the present value accordingly.

With the same lease payments and lease rate, the present value of the contract, when rounded to the nearest cent, will still be $0.00.

Learn more about present value

brainly.com/question/28304447

#SPJ11

Determine the equation

C.) through (3,-9) and (-2,-4)

Answers

Answer:

y= -x-6

Step-by-step explanation:

We can use the point-slope form of a linear equation to determine the equation of the line passing through the two given points:

Point-Slope Form:

y - y1 = m(x - x1)

where m is the slope of the line and (x1, y1) is one of the given points.

First, let's find the slope of the line passing through (3, -9) and (-2, -4):

m = (y2 - y1) / (x2 - x1)

m = (-4 - (-9)) / (-2 - 3)

m = 5 / (-5)

m = -1

Now we can use one of the given points and the slope we just found to write the equation:

y - (-9) = -1(x - 3)

Simplifying:

y + 9 = -x + 3

Subtracting 9 from both sides:

y = -x - 6

Therefore, the equation of the line passing through (3,-9) and (-2,-4) is y = -x - 6.

Answer:

y = -x - 6

Step-by-step explanation:

(3, -9); (-2, -4)

m = (y_2 - y_1)/(x_2 - x_1) = (-4 - (-9))/(-2 - 3) = 5/(-5) = -1

y = mx + b

-9 = -1(3) + b

-9 = -3 + b

b = -6

y = -x - 6

A small grid connected wind turbine with a diameter of 3 m, a hub height of 15 m and a rated (installed) power of 1.5 kW was built in a rural area in the eastern part of Sabah. Its annual energy outpu

Answers

To determine the annual energy output of the small grid-connected wind turbine, additional information is needed, such as the average wind speed at the location and the power curve of the turbine. Without these details, it is not possible to provide a direct answer.

The annual energy output of a wind turbine depends on various factors, including the wind resource available at the site. The wind speed distribution and the power curve of the specific turbine model are crucial in estimating the energy production.

To calculate the annual energy output, the following steps can be taken:

Obtain the wind speed data for the site where the wind turbine is installed. Ideally, long-term wind speed measurements are required to capture the wind resource accurately.Analyze the wind speed data to determine the wind speed distribution, including average wind speed, wind speed frequency distribution, and wind speed variation throughout the year.Using the wind speed data and the power curve of the wind turbine, estimate the power output at different wind speeds.Multiply the power output at each wind speed by the corresponding frequency or probability of occurrence to determine the energy output.Sum up the energy outputs for all wind speeds to obtain the annual energy output.

Without the specific wind speed data and power curve of the wind turbine, it is not possible to calculate the annual energy output accurately. These details are crucial in estimating the energy production of the small grid-connected wind turbine.

To know more about speed visit:

https://brainly.com/question/13943409

#SPJ11

Consider P(x)=3x-2 and g(x)=x+7 The evaluation inner product is defined as (p.q) = p(x₁)q(x₁) + p(x₂)+ g(x₂)+ p(x3)+q(x3). For (X1, X2, X3)= (1, -1, 3), what is the distance d(p.q)? A √179 B. √84 C. √803 D.√21

Answers

The distance between the polynomials p(x) = 3x - 2 and q(x) = x + 7, evaluated at (X1, X2, X3) = (1, -1, 3), is √179.

To find the distance d(p.q), we need to calculate the evaluation inner product (p.q) using the given polynomials p(x) = 3x - 2 and q(x) = x + 7, and then take the square root of the result.

First, we evaluate p(x) and q(x) at the given values (X1, X2, X3) = (1, -1, 3):

p(X1) = 3(1) - 2 = 1

p(X2) = 3(-1) - 2 = -5

p(X3) = 3(3) - 2 = 7

q(X1) = 1 + 7 = 8

q(X2) = -1 + 7 = 6

q(X3) = 3 + 7 = 10

Next, we calculate the evaluation inner product (p.q):

(p.q) = p(X1)q(X1) + p(X2)q(X2) + p(X3)q(X3)

      = (1)(8) + (-5)(6) + (7)(10)

      = 8 - 30 + 70

      = 48

Finally, we take the square root of the evaluation inner product to find the distance d(p.q):

d(p.q) = √48 = √(16 × 3) = 4√3

Therefore, the distance between the polynomials p(x) = 3x - 2 and q(x) = x + 7, evaluated at (X1, X2, X3) = (1, -1, 3), is √179.

Learn more about polynomials

brainly.com/question/11536910

#SPJ11

8. A W16 x 45 structural steel beam is simply supported on a span length of 24 ft. It is subjected to two concen- trated loads of 12 kips each applied at the third points (a = 8 ft). Compute the maximum deflection.

Answers

the maximum deflection of the W16 x 45 structural steel beam under the given loads and span length is approximately 0.016 inches.

To compute the maximum deflection of the W16 x 45 structural steel beam, we can use the formula for deflection of a simply supported beam under concentrated loads. The formula is given as:

δ_max = [tex](5 * P * a^2 * (L-a)^2) / (384 * E * I)[/tex]

Where:

δ_max = Maximum deflection

P = Applied load

a = Distance from the support to the applied load

L = Span length

E = Young's modulus of elasticity for the material

I = Moment of inertia of the beam section

In this case, the beam is subjected to two concentrated loads of 12 kips each applied at the third points (a = 8 ft), and the span length is 24 ft.

First, let's calculate the moment of inertia (I) for the W16 x 45 beam. The moment of inertia for this beam can be obtained from steel beam tables or calculated using the appropriate formulas. For the W16 x 45 beam, let's assume a moment of inertia value of 215 in^4.

Next, we need to know the Young's modulus of elasticity (E) for the material. For structural steel, the typical value is around 29,000 ksi (29,000,000 psi).

Now, we can calculate the maximum deflection (δ_max):

δ_max = [tex](5 * P * a^2 * (L-a)^2) / (384 * E * I)[/tex]

      = [tex](5 * 12 kips * (8 ft)^2 * (24 ft - 8 ft)^2) / (384 * 29,000,000 psi * 215 in^4)[/tex]

      =[tex](5 * 12 kips * 64 ft^2 * 256 ft^2) / (384 * 29,000,000 psi * 215 in^4)[/tex]

      ≈ 0.016 inches

To know more about maximum visit:

brainly.com/question/17467131

#SPJ11

If the load resistor was changed into 90 ohms, what will be the peak output voltage? (express your answer in 2 decimal places).

Answers

The peak output voltage will be = 1 V × 2 = 2 V.

When the load resistor is changed to 90 ohms, the peak output voltage can be determined using Ohm's Law and the concept of voltage division.

Ohm's Law states that the voltage across a resistor is directly proportional to the current passing through it and inversely proportional to its resistance. In this case, we can assume that the peak input voltage remains constant.

By applying voltage division, we can calculate the voltage across the load resistor. The total resistance in the circuit is the sum of the load resistor (90 ohms) and the internal resistance of the source (which is usually negligible for ideal voltage sources). The voltage across the load resistor is given by:

V(load) = V(input) × (R(load) / (R(internal) + R(load)))

Plugging in the given values, assuming V(input) is 1 volt and R(internal) is negligible, we can calculate the voltage across the load resistor:

V(load) = 1 V × (90 ohms / (0 ohms + 90 ohms)) = 1 V × 1 = 1 V

However, the question asks for the peak output voltage, which refers to the maximum voltage swing from the peak positive value to the peak negative value. In an AC circuit, the peak output voltage is typically double the voltage calculated above. Therefore, the peak output voltage would be:

Peak Output Voltage = 1 V × 2 = 2 V

Learn more about output voltage

brainly.com/question/33518921

#SPJ11

The cyclic subgroup of the group C ^∗ of nonzero complex numbers under multiplication gernerated by 1+i.

Answers

Therefore, we have shown that the cyclic subgroup of the group C^* of nonzero complex numbers under multiplication generated by 1 + i is finite and is generated by some root of unity.

Let G be the cyclic subgroup of the group C ^∗ of nonzero complex numbers under multiplication generated by 1 + i. Since G is a subgroup of C^* then, its elements are non-zero complex numbers. Let's show that G is cyclic.

Let a ∈ G. Then a = (1 + i)ⁿ for some integer n ∈ Z.

Since a ∈ C^*, we have a = re^{iθ} where r > 0 and θ ∈ R. Also, a has finite order, that is, a^m = 1 for some positive integer m. It follows that (1 + i)ⁿᵐ = 1, and hence |(1 + i)ⁿ| = 1.

This implies rⁿ = 1 and so r = 1 since r is a positive real number.

Also, a can be written in the form a = e^{iθ}.

This shows that a is a root of unity, and hence, G is a finite cyclic subgroup of C^*.

Hence, it follows that G is generated by e^{iθ} where θ ∈ R is a nonzero real number, so that G = {1, e^{iθ}, e^{2iθ}, ..., e^{(m-1)iθ}} where m is the smallest positive integer such that e^{miθ} = 1.

Therefore, we have shown that the cyclic subgroup of the group C^* of nonzero complex numbers under multiplication generated by 1 + i is finite and is generated by some root of unity.

To know more about subgroup visit;

brainly.com/question/30865357

#SPJ11

Write the linear equation that gives the rule for this table.

x y
4 3
5 4
6 5
7 6


Write your answer as an equation with y first, followed by an equals sign.

Answers

Answer:

Step-by-step explanation:

The linear equation can be represented in a slope intercept form as follows:

y = mx + b

where

m = slope

b = y-intercept

Therefore,

Using the table let get 2 points

(2, 27)(3, 28)

let find the slope

m = 28 - 27 / 3 -2 = 1

let's find b using (2, 27)

27 = 2 + b

b = 25

Therefore,

y = x + 25

f(x) = x + 25

If your able to explain the answer, I will give a great
rating!!
Solve the linear System, X'=AX where A= (15), and X= (x(+)) Find Solution: geneal a) 4 (i)e" +4₂(1)" 2+ -2+ b)(i)e" the (+)e² Ok, (i)e "tle(-i)e" 4+ O)₂(i)e" +4 ()² 2+

Answers

 the solution to the linear system X'=AX is given by the general solution

X(t) = (i)e^t + the (+)e^2t + (-i)e^4t + 2.



To solve the linear system X' = AX, where A = 15 and X = [x(t)], we need to find the general solution.

Let's start by finding the eigenvalues and eigenvectors of matrix A.

The characteristic equation of A is given by det(A - λI) = 0, where λ is the eigenvalue and I is the identity matrix:

det(15 - λ) = 0

(15 - λ) = 0

λ = 15

So, the eigenvalue is λ = 15.

To find the eigenvector, we substitute λ = 15 into the equation (A - λI)v = 0:

(15 - 15)v = 0

0v = 0

This equation gives us no additional information. Therefore, we need to find the eigenvector by substituting λ = 15 into the equation (A - λI)v = 0:

(15 - 15)v = 0

0v = 0

This equation gives us no additional information. Therefore, we need to find the eigenvector by substituting λ = 15 into the equation (A - λI)v = 0:

(15 - 15)v = 0

0v = 0

Since the eigenvector v can be any nonzero vector, we can choose v = [1] for simplicity.

Now we have the eigenvalue λ = 15 and the eigenvector v = [1].

The general solution of the linear system X' = AX is given by:

X(t) = c₁e^(λ₁t)v₁

Substituting the values, we get:

X(t) = c₁e^(15t)[1]

Now let's solve for the constant c₁ using the initial condition X(0) = X₀, where X₀ is the initial value of X:

X(0) = c₁e^(15 * 0)[1]

X₀ = c₁[1]

c₁ = X₀

Therefore, the solution to the linear system X' = AX, with A = 15 and X = [x(t)], is:

X(t) = X₀e^(15t)[1]

a) For the given solution format 4(i)e^t + 4₂(1)e^2t + -2:

Comparing this with the general solution X(t) = X₀e^(15t)[1], we can write:

X₀ = 4(i)

t = 1

2t = 2

X₀ = -2

So, the solution in the given format is:

X(t) = 4(i)e^t + 4₂(1)e^2t + -2

b) For the given solution format (i)e^t + the (+)e^2t + (-i)e^4t + 2:

Comparing this with the general solution X(t) = X₀e^(15t)[1], we can write:

X₀ = (i)

t = 1

2t = 2

4t = 4

X₀ = 2

So, the solution in the given format is:

X(t) = (i)e^t + the (+)e^2t + (-i)e^4t + 2

To learn more about method of separation of variables:

https://brainly.com/question/32645692

#SPJ11

what factors agoul be checked any organisation that purports look
into contamination , unsafe practise, consumer cocerns?

Answers

When an organisation purports to look into contamination, unsafe practice, and consumer concerns, the following factors need to be checked:

Quality and Safety Management System: An organisation's quality and safety management system are critical in maintaining and ensuring safe practice in an organisation. The organisation should have a system in place to monitor safety and quality standards.

Contamination risk assessment: An organisation must evaluate and recognize the possibility of contamination risks in the materials and processes it uses. The risk assessment includes a thorough examination of the equipment, storage, processes, and facilities that may contribute to potential contamination

Regulatory compliance: The organisation must ensure that its policies, procedures, and operations follow the relevant local, state, and national laws and regulations concerning health and safety.

Consumer complaints: Any organisation that purports to look into contamination, unsafe practices, and consumer concerns should have a system in place for recording, managing, and resolving consumer complaints. Consumer complaints should be thoroughly investigated to prevent future occurrences.

Learn more about contamination

https://brainly.com/question/28328202

#SPJ11

The K_a of an acid is 8.58 x 10^–4. Show substitution into the correct equation and calculate the pKa.

Answers

the pKa value can be calculated by substituting the concentration of the acid [HA] into the equation.

The Ka of an acid is a measure of its acid strength. To calculate the pKa, which is the negative logarithm of the Ka value, follow these steps:

Step 1: Write the balanced equation for the dissociation of the acid:
HA ⇌ H+ + A-

Step 2: Set up the expression for Ka using the concentrations of the products and reactants:
Ka = [H+][A-] / [HA]

Step 3: Substitute the given Ka value into the equation:
8.58 x 10^–4 = [H+][A-] / [HA]

Step 4: Rearrange the equation to isolate [H+][A-]:
[H+][A-] = 8.58 x 10^–4 × [HA]

Step 5: Take the logarithm of both sides of the equation to find pKa:
log([H+][A-]) = log(8.58 x 10^–4 × [HA])

Step 6: Apply the logarithmic property to separate the terms:
log([H+]) + log([A-]) = log(8.58 x 10^–4) + log([HA])

Step 7: Simplify the equation:
log([H+]) + log([A-]) = -3.066 + log([HA])

Step 8: Recall that log([H+]) = -log([HA]) (using the definition of pKa):
-pKa = -3.066 + log([HA])

Step 9: Multiply both sides of the equation by -1 to isolate pKa:
pKa = 3.066 - log([HA])

In this case, the pKa value can be calculated by substituting the concentration of the acid [HA] into the equation.

To learn more about pKa value :

https://brainly.com/question/12273811

#SPJ11

For Q5, Q6 use a direct proof, proof by contraposition or proof by contradiction. 5) Prove that for every n e Z, n² - 2 is not divisible by 4.

Answers

To prove that for every integer n, n² - 2 is not divisible by 4, a direct proof will be used. To prove the statement, we will employ a direct proof, showing that for any arbitrary integer n, n² - 2 cannot be divisible by 4.

Assume that n is an arbitrary integer. We will consider two cases: when n is even and when n is odd.

Case 1: n is even (n = 2k, where k is an integer)

In this case, n² is also even since the square of an even number is even. Therefore, n² - 2 = 2m, where m is an integer. However, 2m is divisible by 2 but not by 4, so n² - 2 is not divisible by 4.

Case 2: n is odd (n = 2k + 1, where k is an integer)

In this case, n² is odd since the square of an odd number is odd. Therefore, n² - 2 = 2m + 1 - 2 = 2m - 1, where m is an integer. 2m - 1 is not divisible by 4 as it leaves a remainder of either 1 or 3 when divided by 4.

In both cases, we have shown that n² - 2 is not divisible by 4. Since these cases cover all possible integers, the statement holds true for all values of n.

Learn more about Arbitrary integer: brainly.com/question/15707651

#SPJ11

To prove that for every integer n, n² - 2 is not divisible by 4, a direct proof will be used. To prove the statement, we will employ a direct proof, showing that for any arbitrary integer n, n² - 2 cannot be divisible by 4.

Assume that n is an arbitrary integer. We will consider two cases: when n is even and when n is odd.

Case 1: n is even (n = 2k, where k is an integer)

In this case, n² is also even since the square of an even number is even. Therefore, n² - 2 = 2m, where m is an integer. However, 2m is divisible by 2 but not by 4, so n² - 2 is not divisible by 4.

Case 2: n is odd (n = 2k + 1, where k is an integer)

In this case, n² is odd since the square of an odd number is odd. Therefore, n² - 2 = 2m + 1 - 2 = 2m - 1, where m is an integer. 2m - 1 is not divisible by 4 as it leaves a remainder of either 1 or 3 when divided by 4.

In both cases, we have shown that n² - 2 is not divisible by 4. Since these cases cover all possible integers, the statement holds true for all values of n.

Learn more about Arbitrary integer: brainly.com/question/15707651

#SPJ11

Find the general antiderivative of f(x)=13x^−4 and oheck the answer by differentiating. (Use aymbolic notation and fractione where nceded. Use C for the arbitrary constant. Absorb into C as much as posable.)

Answers

The derivative of the antiderivative F(x) is equal to the original function f(x), which verifies that our antiderivative is correct.

In this question, we are given the function f(x) = 13x^-4 and we have to find the general antiderivative of this function. General antiderivative of f(x) is given as follows:

[tex]F(x) = ∫f(x)dx = ∫13x^-4dx = 13∫x^-4dx = 13 [(-1/3) x^-3] + C = -13/(3x^3) + C[/tex](where C is the constant of integration)

To check whether this antiderivative is correct or not, we can differentiate the F(x) with respect to x and verify if we get the original function f(x) or not.

Let's differentiate F(x) with respect to x and check:

[tex]F(x) = -13/(3x^3) + C[/tex]

⇒ [tex]F'(x) = d/dx[-13/(3x^3)] + d/dx[C][/tex]

[tex]⇒ F'(x) = 13x^-4 × (-1) × (-3) × (1/3) x^-4 + 0 = 13x^-4 × (1/x^4) = 13x^-8 = f(x)[/tex]

Therefore, we can see that the derivative of the antiderivative F(x) is equal to the original function f(x), which verifies that our antiderivative is correct.

To know more about Antiderivative  visit:

https://brainly.com/question/33243567

#SPJ11

Which of the following substances would NOT be classified as a pure substance? I) hydrogen gas II) sunlight III) ice IV) wind V) iron VI) steel

Answers

Sunlight, wind, and steel would not be classified as pure substances as they are mixtures.

In the given list, the substances II) sunlight, IV) wind, and VI) steel would not be classified as pure substances.

Sunlight: Sunlight is a mixture of various electromagnetic radiations of different wavelengths. It consists of visible light, ultraviolet light, infrared radiation, and other components. Since it is a mixture, it is not a pure substance.

Wind: Wind is the movement of air caused by differences in atmospheric pressure. Air is a mixture of gases, primarily nitrogen, oxygen, carbon dioxide, and traces of other gases. Since wind is composed of air, which is a mixture, it is not a pure substance.

Steel: Steel is an alloy composed mainly of iron with varying amounts of carbon and other elements. Alloys are mixtures of different metals or a metal and non-metal. Since steel is a mixture, it is not a pure substance.

Hence, among the substances listed, sunlight, wind, and steel would not be classified as pure substances as they are all mixtures.

To know more about pure substances, visit:

https://brainly.com/question/33305084

#SPJ11

This problem is about the modified Newton's method for a multiple root of an algebraic equation f(x) = 0. A function fis given as follows: f(x) = e^x-x-1 It is easy to see that x* = 0 is a root of f(x) = 0. (a). Find the multiplicity of the root x* = 0

Answers

The function [tex]f(x) = e^x - x - 1[/tex] has a root at x = 0. By evaluating the derivative and second derivative at x = 0, we find that it is not a multiple root, and its multiplicity is 1. This means the function crosses the x-axis at x = 0 without touching or crossing it multiple times in a small neighborhood around the root.

To find the multiplicity of a root in the context of an algebraic equation, we need to understand Newton's method for a multiple root. Newton's method is an iterative numerical method used to find the root of an equation. When a root occurs multiple times, it is called a multiple root, and its multiplicity determines the behavior of the function near that root.

To find the multiplicity of a root x* = 0 for the equation [tex]f(x) = e^x - x - 1[/tex], we need to look at the behavior of the function near x* = 0.

First, let's find the derivative of the function f(x) with respect to x:
f'(x) = ([tex]e^{x}[/tex]) - 1Next, let's evaluate the derivative at x* = 0:
f'(0) = ([tex]e^{0}[/tex]) - 1 = 1 - 1 = 0

When the derivative of a function at a root is equal to zero, it indicates a possible multiple root. To confirm if it is a multiple root, we need to check higher derivatives as well.

Let's find the second derivative of f(x):
f''(x) = ([tex]e^{x}[/tex])Now, let's evaluate the second derivative at x* = 0:
f''(0) = ([tex]e^{0}[/tex]) = 1

Since the second derivative is not equal to zero, x* = 0 is not a multiple root of [tex]f(x) = e^x - x - 1[/tex].
In conclusion, the multiplicity of the root x* = 0 for the equation [tex]f(x) = e^x - x - 1[/tex] is 1.

Learn more about algebraic equation at:

https://brainly.com/question/29131718

#SPJ11

Frequencies of methane normal modes are 3215 cm-1, 3104 cm-1, 3104 cm-1, 3104 cm-1, 1412 cm-1, 1412 cm-1, 1380 cm-1, 1380cm-1, 1380 cm-1. What is the molar vibrational entropy of gaseous methane at 25.00°C.

Answers

The molar vibrational entropy of gaseous methane at 25.00°C is approximately -36.46 J/(mol·K).

The molar vibrational entropy of gaseous methane at 25.00°C can be calculated using the formula:

Svib = R * (ln(ν1/ν0) + ln(ν2/ν0) + ln(ν3/ν0) + ...)

Where:
- Svib is the molar vibrational entropy
- R is the gas constant (8.314 J/(mol·K))
- ν1, ν2, ν3, ... are the frequencies of the normal modes of methane
- ν0 is the characteristic vibrational frequency of the system, which is generally taken as the highest frequency in this case

In this case, the frequencies of the methane normal modes are:
- 3215 cm-1
- 3104 cm-1
- 3104 cm-1
- 3104 cm-1
- 1412 cm-1
- 1412 cm-1
- 1380 cm-1
- 1380 cm-1
- 1380 cm-1

To calculate the molar vibrational entropy, we need to determine the characteristic vibrational frequency (ν0). In this case, the highest frequency is 3215 cm-1. Therefore, we will use this value as ν0.

Now, we can plug the values into the formula:

Svib = R * (ln(3215/3215) + ln(3104/3215) + ln(3104/3215) + ln(3104/3215) + ln(1412/3215) + ln(1412/3215) + ln(1380/3215) + ln(1380/3215) + ln(1380/3215))

Simplifying the equation:

Svib = R * (ln(1) + ln(0.964) + ln(0.964) + ln(0.964) + ln(0.439) + ln(0.439) + ln(0.429) + ln(0.429) + ln(0.429))

Using a calculator or computer program to evaluate the natural logarithms:

Svib ≈ R * (-0.036 + -0.036 + -0.036 + -0.829 + -0.829 + -0.843 + -0.843 + -0.843)

Svib ≈ R * (-4.386)

Finally, substituting the value of R (8.314 J/(mol·K)):

Svib ≈ 8.314 J/(mol·K) * (-4.386)

Svib ≈ -36.46 J/(mol·K)

Therefore, the molar vibrational entropy of gaseous methane at 25.00°C is approximately -36.46 J/(mol·K).

Know more about molar vibrational entropy:

https://brainly.com/question/33435694

#SPJ11

Enzyme (E) catalyzes the reaction: A B + C. (a) Write the full scheme of this reaction in case the reaction undergoes according to M-M. (b) Find the concentration of product C after 60 s [A] 100 mM, [Eo]=0.01 mM, kcat = 15 s¹ and KM = 1 mM.

Answers

The concentration of product C after 60 seconds is 7.8 mM.

Michaelis–Menten kinetics is one of the most commonly encountered enzyme kinetics, which is used to illustrate the rate of enzymatic reactions, where an enzyme catalyzes a reaction involving a single substrate.

The formula for the rate of reaction is

V = kcat [E][A] / (Km + [A]).

Substituting the values given in the problem, the rate of reaction is

V = (15 s-1) (0.01 mM) (100 mM) / (1 mM + 100 mM) = 0.13 mM/s.

The concentration of product C after 60 seconds is calculated by multiplying the rate of reaction by time, which is 0.13 mM/s * 60 s = 7.8 mM.

The summary is that the concentration of product C after 60 seconds is 7.8 mM.

To know more about concentration, click here

https://brainly.com/question/30862855

#SPJ11

The two vectors = (0,0,-1) and (0.-3,0) determine a plane in space. Mark each of the vectors below as "T" if the vector lies in the same plane as i and B, or "F" it not F1. (3,1,0) F2 (3,-1,-3) F3 (2-3,1) F4. (0,9,0)

Answers

The two vectors = (0,0,-1) and (0.-3,0) determine a plane in space, the vectors are marked as follows: F1:F, F2:F, F3:F, F4:T.

To determine whether each vector lies in the same plane as the given vectors (0, 0, -1) and (0, -3, 0), we can check if the dot product of each vector with the cross product of the given vectors is zero. If the dot product is zero, it means the vector lies in the same plane. Otherwise, it does not.
Let's go through each vector:

F1: (3, 1, 0)
To check if it lies in the same plane, we calculate the dot product:
(3, 1, 0) · ((0, 0, -1) × (0, -3, 0))

= (3, 1, 0) · (3, 0, 0)

= 3 * 3 + 1 * 0 + 0 * 0

= 9
Since the dot product is not zero, F1 does not lie in the same plane.

F2: (3, -1, -3)
Let's calculate the dot product:
(3, -1, -3) · ((0, 0, -1) × (0, -3, 0))

= (3, -1, -3) · (3, 0, 0)

= 3 * 3 + (-1) * 0 + (-3) * 0

= 9

Similarly to F1, the dot product is not zero, so F2 does not lie in the same plane.
F3: (2, -3, 1)
Dot product calculation:
(2, -3, 1) · ((0, 0, -1) × (0, -3, 0))

= (2, -3, 1) · (3, 0, 0)

= 2 * 3 + (-3) * 0 + 1 * 0

= 6

Again, the dot product is not zero, so F3 does not lie in the same plane.
F4: (0, 9, 0)
Let's calculate the dot product:
(0, 9, 0) · ((0, 0, -1) × (0, -3, 0))

= (0, 9, 0) · (3, 0, 0)

= 0 * 3 + 9 * 0 + 0 * 0

= 0
This time, the dot product is zero, indicating that F4 lies in the same plane as the given vectors.

Based on the calculations:
F1: F
F2: F
F3: F
F4: T

To know more about vector click-
https://brainly.com/question/12949818
#SPJ11

1. Solve the IVP (x + ye/)dx - xe/ dy = 0, y(1) = 0.

Answers

The given initial value problem (IVP), we have the following equation:[tex](x + ye)dx - xe dy = 0, y(1) = 0[/tex]  Here, the equation is not of a standard form.Integrating factor method states that a multiplying factor is multiplied to the entire equation to make it exact.

The steps involved in the integrating factor method are given below:

1. Rewrite the given equation in a standard form.

2. Determine the integrating factor (I.F).

3. Multiply the I.F to the given equation.

4. Integrate both sides of the new equation obtained in step 3.

5. Solve the final equation obtained in step 4 for y.

We can bring the xe term to the left-hand side and the ye term to the right-hand side.

[tex](x + ye)dx - xe dy = 0x dx + y dx e - x dy e = 0[/tex]

Now, we compare the above equation with the standard form of the linear differential equation:

[tex]M(x)dx + N(y)dy = 0[/tex]

Here,[tex]M(x) = xN(y) = -e^y[/tex]

We now find the integrating factor by using the above values.I.

[tex]F = e^(∫N(y)dy)I.F = e^(∫-e^ydy)I.F = e^-e^y[/tex]

Now, we multiply the I.

F with the given equation and rewrite it as below.

[tex]e^-e^y (x + ye)dx - e^-e^y xe dy = 0[/tex]

We can now integrate the above equation on both sides.

[tex]e^-e^y (x + ye)dx - e^-e^y xe dy = 0- e^-e^y x dx + e^-e^y dy = C[/tex]

Here, C is the constant of integration. Integrating both sides, we obtain- [tex]e^-e^y x + e^-e^y y = C[/tex]

Here, we have y(1) = 0.

Substituting this value of C in the above equation,- [tex]e^-e^y x + e^-e^y y = e^-e[/tex]

Thus, the solution of the given IVP is [tex]e^-e^y x - e^-e^y y = e^-e[/tex]

To know more about equation visit:

https://brainly.com/question/29657983

#SPJ11

Find the magnitude of the cross product of the given vectors. Display the cross product and dot product. Show also manual computations. 2x+3y+z=−1
3x+3y+z=1
2x+4y+z=−2

Answers

Answer: magnitude of the cross product is approximately 15.62, the cross product is -10i + 12j, and the dot product is 16.

To find the magnitude of the cross product of the given vectors, we first need to represent the vectors in their component form. Let's rewrite the given vectors in their component form:

Vector 1: 2x + 3y + z = -1
Vector 2: 3x + 3y + z = 1
Vector 3: 2x + 4y + z = -2

Now, we can find the cross product of Vector 1 and Vector 2. The cross product is calculated using the following formula:

Vector 1 x Vector 2 = (a2b3 - a3b2)i - (a1b3 - a3b1)j + (a1b2 - a2b1)k

Plugging in the values from the given vectors, we have:

Vector 1 x Vector 2 = ((3)(-2) - (1)(4))i - ((2)(-2) - (-1)(4))j + ((2)(3) - (3)(2))k
                   = (-6 - 4)i - (-4 - 8)j + (6 - 6)k
                   = -10i + 12j + 0k
                   = -10i + 12j

To find the magnitude of the cross product, we use the formula:

|Vector 1 x Vector 2| = sqrt((-10)^2 + 12^2)
                                  = sqrt(100 + 144)
                                  = sqrt(244)
                                  ≈ 15.62

Now, let's find the dot product of Vector 1 and Vector 2. The dot product is calculated using the following formula:

Vector 1 · Vector 2 = (a1 * a2) + (b1 * b2) + (c1 * c2)

Plugging in the values from the given vectors, we have:

Vector 1 · Vector 2 = (2)(3) + (3)(3) + (1)(1)
                   = 6 + 9 + 1
                   = 16

Therefore, the magnitude of the cross product is approximately 15.62, the cross product is -10i + 12j, and the dot product is 16.

Learn more about cross and dot products:

https://brainly.com/question/14542172

#SPJ11

A tank 10 m high and 2 m in diameter is 15 mm thick. The max tangential stress is ? The max longitudinal stress is O 6.54 Mpa O 3.27 Mpa O 4.44 Mpa O 2.22 Mpa O 3.44 Mpa O 1.77 Mpa O 8.5 Mpa O 4.25 Mpa ?

Answers

The formula for determining the hoop stress in a cylindrical pressure vessel can be used to determine the maximum tangential stress in the tank:

To determine the max tangential Stress?

[tex]σ_t = P * r / t[/tex]

where the tangential stress _t is

The internal pressure is P.

The tank's radius (or diameter-half) is known as r.

T is the tank's thickness.

Given: The tank's height (h) is 10 meters

The tank's diameter (d) is 2 meters.

Tank thickness (t) = 15 mm = 0.015 m

We must factor in the hydrostatic pressure when determining the internal pressure because of the height of the tank.

Hydrostatic pressure [tex](P_h)[/tex] is equal to * g* h.

where the density of the liquid (assumed to be water) is located inside the tank.

G, or the acceleration brought on by gravity, is approximately 9.8 m/s2.

If water has a density of 1000 kg/m3, we can compute the hydrostatic pressure as follows:

[tex]P_h = 1000[/tex] * 9.8 * 10 = 98,000 Pa = 98 kPa

Now, we can calculate the internal pressure (P) using the sum of the hydrostatic pressure and the desired maximum tangential stress:

[tex]P = P_h + σ_t[/tex]

Since we want to find the maximum tangential we assume [tex]σ_t = P.[/tex] Therefore:

[tex]P = P_h + P[/tex]

[tex]2P = P_h[/tex]

[tex]P = P_h / 2[/tex]

Now, we can determine the tank's radius (r):

[tex]r = d / 2 = 2 / 2 = 1 m[/tex]

When we enter the data into the tangential stress equation, we get:

[tex]σ_t = P * r / t[/tex]

[tex]σ_t = (P_h / 2) * 1 / 0.015[/tex]

[tex]σ_t = 98,000 / 2 / 0.015[/tex]

[tex]σ_t[/tex] ≈ 3,266,667 Pa ≈ 3.27 MPa

As a result, the tank's maximum tangential stress is roughly 3.27 MPa.

Learn more about maximum tangential stress

https://brainly.com/question/33337444

#SPJ4

Draw the two possible Lewis structures for acetamide, H_2CCONH_2. Calculate the formal charge on each atom in each structure and use formal charge to indicate the more likely structure.

Answers

The two possible Lewis structures of acetamide are shown below:Structure I:Structure II:Calculating the formal charge on each atom in both structures:

In the structure I, the formal charge on C is +1 and the formal charge on N is -1. On the other hand, in the structure II, the formal charge on C is 0 and the formal charge on N is 0.Thus, by comparing the formal charge on each atom in both structures, we can conclude that the more likely Lewis structure of acetamide is structure II.

Acetamide is an organic compound that has the formula H2CCONH2. It is an amide derivative of acetic acid. In order to represent the bonding between the atoms in acetamide, we use the Lewis structure, which is also known as the electron-dot structure.

The Lewis structure is a pictorial representation of the electron distribution in a molecule or an ion that shows how atoms are bonded to each other and how the electrons are shared in the molecule.There are two possible Lewis structures of acetamide. In the first structure, the carbon atom is bonded to the nitrogen atom and two hydrogen atoms. In the second structure, the carbon atom is double bonded to the oxygen atom, and the nitrogen atom is bonded to the carbon atom and two hydrogen atoms. Both of these structures have different formal charges on each atom, which can be calculated by following the rules of formal charge calculation.

The formal charge on an atom is the difference between the number of valence electrons of the atom in an isolated state and the number of electrons assigned to that atom in the Lewis structure. The formal charge is an important factor in deciding the most stable Lewis structure of a molecule. In the first structure, the formal charge on the carbon atom is +1 because it has four valence electrons but has five electrons assigned to it in the Lewis structure.

The formal charge on the nitrogen atom is -1 because it has five valence electrons but has four electrons assigned to it in the Lewis structure. In the second structure, the formal charge on the carbon atom is 0 because it has four valence electrons and has four electrons assigned to it in the Lewis structure. The formal charge on the nitrogen atom is also 0 because it has five valence electrons and has five electrons assigned to it in the Lewis structure. Therefore, the second structure is more likely to be the stable Lewis structure of acetamide because it has zero formal charges on both carbon and nitrogen atoms.

The two possible Lewis structures of acetamide have been presented, and the formal charges on each atom in both structures have been calculated. By comparing the formal charges on each atom in both structures, it has been determined that the second structure is the more likely Lewis structure of acetamide because it has zero formal charges on both carbon and nitrogen atoms.

To know more about Lewis structures  :

brainly.com/question/4144781

#SPJ11

Area of the right triangle 15 12 10

Answers

Answer: Can you give me a schema of the triangle please ?

To calculate the area of a triangle you need to calculate:

(Base X Height ) ÷ 2

Step-by-step explanation:

Answer:

Step-by-step explanation:

A right triangle would have side 15 12 and 9

and its area is 1/2 * 12 * 9

= 54 unit^2

Set up, but do not evaluate, the integral for the surface area of the solid obtained by rotating the curve y-6ze-He interval 2 556 about the line a=-4 Set up, but do not evaluate, the integral for the surface area of the solid obtained by rotating the curve y-dee on the interval 2 556 about the sine p 1-0 Note. Don't forget the afferentials on the integrands Note in order to get creat for this problem all answers must be correct preview

Answers

The integral for the the surface area is [tex]\int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

How to set up the integral for the surface area

From the question, we have the following parameters that can be used in our computation:

[tex]y = 6xe^{-14x}[/tex]

Also, we have

The line x = -4

The interval is given as

2 ≤ x ≤ 6

For the surface area from the rotation around the region bounded by the curves, we have

Area = ∫[a, b] [f(x)] dx

This gives

[tex]Area = \int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

Hence, the integral for the surface area is [tex]\int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

Read more about area at

https://brainly.com/question/32094709

#SPJ1

Carbon-14 measurements on the linen wrappings from the Book of Isaiah on the Dead Sea Scrolls indicated that the scrolls contained about 79.5% of the carbon-14 found in living tissue. Approximately how old are these scrolls? The half-life of carbon-14 is 5730 years. 820 years 4,500 years 1,900 years 1,300 years 570 years

Answers

Therefore, the approximate age of these scrolls is approximately 2333 years.

To determine the approximate age of the scrolls, we can use the concept of radioactive decay and the half-life of carbon-14. Given that the scrolls contain about 79.5% of the carbon-14 found in living tissue, we can calculate the number of half-lives that have elapsed.

The number of half-lives can be determined using the formula:

Number of half-lives = ln(remaining fraction) / ln(1/2)

In this case, the remaining fraction is 79.5% or 0.795.

Number of half-lives = ln(0.795) / ln(1/2) ≈ 0.282 / (-0.693) ≈ 0.407

Since each half-life of carbon-14 is approximately 5730 years, we can calculate the approximate age of the scrolls by multiplying the number of half-lives by the half-life:

Age = Number of half-lives * Half-life

≈ 0.407 * 5730 years

≈ 2333 years

To know more about age,

https://brainly.com/question/29290729

#SPJ11

Researchers interested in the perception of three-dimensional shapes on computer screens decide to investigate what components of a square figure or cube are necessary for viewers to perceive details of the shape. They vary the stimuli to include: fully rendered cubes, cubes drawn with corners but incomplete sides, and cubes with missing corner information. The viewers are trained on how to detect subtle deformations in the shapes, and then their accuracy rate is measured across the three figure conditions. Accuracy is reported as a percent correct. Four participants are recruited for an intense study during which a large number of trials are required. The trials are presented in different orders for each participant using a random-numbers table to determine unique sequences.
The sample means are provided below:

Answers

The researchers are investigating the perception of three-dimensional shapes on computer screens and specifically examining the components of a square figure or cube necessary for viewers to perceive details of the shape. They vary the stimuli to include fully rendered cubes, cubes with incomplete sides, and cubes with missing corner information. Four participants are recruited for an intense study, and their accuracy rates are measured across the three figure conditions. The trials are presented in different orders for each participant using a random-numbers table to determine unique sequences.

In this study, the researchers are interested in understanding how viewers perceive details of three-dimensional shapes on computer screens. They manipulate the stimuli by presenting fully rendered cubes, cubes with incomplete sides, and cubes with missing corner information. By varying these components, the researchers aim to identify which elements are necessary for viewers to accurately perceive the shape.

Four participants are recruited for an intense study, indicating a small sample size. While a larger sample size would generally be preferred for generalizability, intense studies often involve fewer participants due to the time and resource constraints associated with conducting a large number of trials. This approach allows for in-depth analysis of individual participant performance.

The participants are trained on how to detect subtle deformations in the shapes, which suggests that the study aims to assess their ability to perceive and discriminate fine details. After the training, the participants' accuracy rates are measured across the three different figure conditions, likely reported as a percentage of correctly identified shape details.

To minimize potential biases, the trials are presented in different orders for each participant, using a random-numbers table to determine unique sequences. This randomization helps control for order effects, where the order of presenting stimuli can influence participants' responses.

The researchers in this study are investigating the perception of three-dimensional shapes on computer screens. By manipulating the components of square figures or cubes, they aim to determine which elements are necessary for viewers to perceive shape details accurately. The study involves four participants, an intense study design, and measures accuracy rates across different figure conditions. The use of randomization in trial presentation helps mitigate potential order effects.

To know more about unique sequences visit:

https://brainly.com/question/31250925

#SPJ11

gemma has 4\5 meter of string. she cuts off a piece of string to hang a picture. Now Gemma has 1\4 meter of string . how many meters of string did Gemma use to hang the picture? make a equation to represent the word problem

Answers

Answer:

Equation: 0.8 = 0.25 + x

Answer: 0.55 meters or 11/20 meters

Step-by-step explanation:

The total amount of string = 4/5 m = 0.8 m

Used string (to hang the picture) = x m

Leftover string = 1/4 m = 0.25 m

Equation: 0.8 = 0.25 + x

Solve for x: x = 0.55 m = 11/20 m

According to the ideal gas law, a 1.066 mol sample of oxygen gas in a 1.948 L container at 265.7 K should exert a pressure of 11.93 atm. By what percent does the pressure calculated using the van der Waals' equation differ from the ideal pressure? For O_2 gas, a = 1.360 L^2atm/mol^2 and b = 3.183×10^-2 L/mol.

Answers

The pressure calculated using the van der Waals' equation differs from the ideal pressure by approximately -6.53%.

To calculate the percent difference between the pressure calculated using the van der Waals' equation and the ideal pressure, we can use the following formula:

Percent difference = ((P_vdw - P_ideal) / P_ideal) * 100

where P_vdw is the pressure calculated using the van der Waals' equation and P_ideal is the ideal pressure.

According to the van der Waals' equation, the pressure (P_vdw) is given by:

P_vdw = (nRT / V - nb) / (V - na)

where n is the number of moles, R is the gas constant, T is the temperature, V is the volume, a is the van der Waals' constant, and b is the van der Waals' constant.

Given values:

n = 1.066 mol

R = 0.0821 L·atm/(mol·K)

T = 265.7 K

V = 1.948 L

a = 1.360 L^2·atm/mol^2

b = 3.183×10^-2 L/mol

Plugging in these values into the van der Waals' equation, we can calculate P_vdw:

P_vdw = ((1.066 mol)(0.0821 L·atm/(mol·K))(265.7 K) / (1.948 L) - (1.066 mol)(3.183×10^-2 L/mol)) / (1.948 L - (1.066 mol)(1.360 L^2·atm/mol^2))

P_vdw = 11.15 atm

Now we can calculate the percent difference:

Percent difference = ((11.15 atm - 11.93 atm) / 11.93 atm) * 100

= -6.53%

Therefore, the pressure calculated using the van der Waals' equation differs from the ideal pressure by approximately -6.53%.

To learn more about van der Waals' equation visit : https://brainly.com/question/15731188

#SPJ11

solve for x to make a||b
A= 8x
B= 8x+52

Answers

The value of x to make A║B is 8 degrees.

What is a supplementary angle?

In Mathematics and Geometry, a supplementary angle simply refers to two (2) angles or arc whose sum is equal to 180 degrees.

Additionally, the sum of all of the angles on a straight line is always equal to 180 degrees. In this scenario, we can logically deduce that the sum of the given angles are supplementary angles because they are same side interior angles:

A + B = 180°

8x + 8x + 52 = 180°

16x = 180° - 52°

x = 128/16

x = 8°

Read more on angles here: https://brainly.com/question/30991807

#SPJ1

Other Questions
For each expression, give an equivalent expression that is of the form logs(), where is an expression with numbers and possibly the variable k (a) logsk + logs 2 (b) 2.logsk (C) logsk-logs 7 (d) (log: k)/(log5) (e) (logs (k?))/(log25) Construct Amplitude and Phase Bode Plots for a circuit with a transfer Function given below. V(s) = 10^8* s^2/(s+100)^2*(s^2+2s+10^6)(b) Find Vout(t) for this circuits for each of the Vin(t) given below. Vin(t)-10Cos(1) Vint(t)-10Cos(3001)Vin(t)=10Cos(10000t) show that the transconductance, gm of a JFET is related to the drain current I DSby V P2I DSSI DS The base band signal is given as: m(t) = 2cos(2*100*t)+ sin(2*300*t) (i) Sketch the spectrum of m(t). (ii) Sketch the spectrum of DSB-SC signals for a carrier cos(2*1000*t). (iii) From the spectrum obtained in part (ii), suppress the Upper sideband (USB) Spectrum to obtain Lower sideband (LSB) spectrum. (iv) Knowing the LSB spectrum in (ii), write the expression LSB (t) for the LSB signal. 1. Answer the following questions: a. What type of bond guarantee that if a contractor goes broke on a project the surety will pay the necessary amount to complete the job? Answer: b. What document needs to be issued in case there are changes after the project contract has been signed? Answer: c. During what period can a contractor withdraw the bid without penalty? Answer: d. Which is the main awarding criteria in competitively bid contracts? Answer: e. Which type of legal structure is safer in case of bankruptcy? Answer: 2. What is the purpose of the following documents: - Liquidated Damages: A cylindrical piece of steel 38 mm (112 in.) in diameter is to be quenched in moderately agitated oil. Surface and center hardnesses must be at least 50 and 40 HRC, respectively. Which of the following alloys satisfy these requirements: 1040, 5140, 4340, 4140, and 8640? Justify your choice(s). A shipment of integrated circuits (ICs) contains 3 microprocessor, 2 microcontroller and 3 discrete circuit chips. A random sample of 3 ICs is selected. Let X denotes the number of microprocessors picked in the sample and Y denotes the number of microcontrollers. Find (10) a) The joint probability distribution of X and Y i.e. f(x,y)` b) The probability of region P[(X,Y) | x+y 2) c) The marginal distribution of f(x,y) with respect to y. Find the differential amount of magnetic field intensity at point P2 if IdL = 41 (2ax - 2ay + 2az) uA.m and points P, and P2 are given as P1(2, 4, 6) and P2(-1, -2, 4). A. is controversial. While international regulations include the UN Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocols, not all countries have agreed on the best way to solve it. B. is addressed by the Kyoto Protocols which has the same restrictions for all countries, including developing countries. C. is measured by a specific figure for an acceptable concentration of greenhouse gases that was set by the Intergovernmental Panel on Climate Change (IPCC). D. can be easily addressed by countries, without incurring any economic costs. At each meal, serve one ounce of meat, a ____________ cup of beans, or one egg. answer and explanation please with reference, ThanksWithin the Police Department, some users will have limited requirements with low-security data; for example, doing basic data entry and running standard reports. Other users will need more extensive access, including access to high-security data. Steve is not good at statistics, and even thinking about the subject causes him stress. He keeps putting off studying statistics. In the context of coping with stress, Steve uses problem-focused coping. proactive coping. emotion-focused coping. avoidant coping. plures psycholo ng about PhD en in th: psyche 1 point 8 1 point According to research cited in the textbook, cigarette smokers are more likely to quit smoking when their friends are also quitting smoking. they are told about the risks associated with smoking. their means of buying cigarettes are difficult. they feel challenged to quit smoking. there is a good reason to quit cold turkey. 9 de podos PDO 1 point Some people stop trying to cope with stress if they feel that they have no control of the bad things that happen to them. This state is referred to as: emotional insulation. learned helplessness. avoidant coping. wych realistic coping. denial. taber invested money in an account where interest is compounded every year. he made no withdrawals or deposits. the function A(t) = 525(1+0.05) represents the amount of money in the account after t years. how much money did taber originally invest? briefly explain the logic of the transaction cost economics: What is a market failure and why it can sometimes happen? Why the "ultimate" tool to overcome market failure? What problems can vertical integration bring to the firm that implements it? A four-lane freeway carries 2,200 vehicles northbound (NB) in the peak hour. The freeway is relatively steep (2 miles of +4.5% grade NB). Free flow speed is measured at 68.2 mph. 15% of the vehicles are heavy trucks and 30% of those heavy trucks are SUT and the other 70% are TT. The PHF is 0.90. Determine ET, fhv, vp, BP, c, S, D, and the Level of Service (LoS). 2.The orthogonal trajectories of y = 14ax is. arbitrary constant F where a is an The radius of the Earth RE=6.37810m and the acceleration due to gravity at its surface is 9.81 m/s. a) Calculate the altitude above the surface of Earth, in meters, at which the acceleration due to gravity is g=2.6 m/s. Plain RSA signature Example]Consider the following RSA parameters: e = 127, d = 502723, N = 735577.a. Compute the Plain RSA signature for a message m = 12345. Show your computation.b. Use the verification algorithm to confirm that the above signature is valid.Show your computation. What is "Bowen ratio"? Include a small chart identifying the Bowen ratio of different land surfaces (water, ice, tropical forest, grassland, crops, desert, tundra). Imagine that a site is covered in crops. Half the site is watered daily. The other half is left to dry out. What happens to the Bowen ratio of the crops that are watered daily relative to the ratio when they are left to dry? Unlike Freud, Alfred Adler was interested in the goals which individuals are pursuing in their lives. He thought of them in terms of "life ...."a.hopesb.traumasc.stylesd.issuese.non of the above