The domain of the function is the set of all real numbers, and the range of the function is the set of all real numbers greater than or equal to ------.

The dimensions of the cylinder that minimize the production cost are:

radius = approximately 2.78 cm

height = 600 / (πr^2) ≈ 7.14 cm

paper top radius = 2.5 cm

Let's start by finding the formula for the cost of the container in terms of its dimensions.

The volume of the cylinder is given as 600 cubic centimeters, so we have:

πr^2h = 600

where r is the radius of the cylinder and h is its height. Solving for h, we get:

h = 600 / (πr^2)

The surface area of the cylinder is given by:

A = 2πrh + 2πr^2

Substituting h in terms of r, we get:

A = 2πr(600/(πr^2)) + 2πr^2

= 1200/r + 2πr^2

The cost of the container is the sum of the cost of the styrofoam sides and bottom and the cost of the paper top. Let's call the radius of the paper top R, and assume that the height of the cylinder is greater than or equal to the radius of the paper top, so that the top can be completely covered with paper. Then the cost of the container is:

C = 0.04(2πrh + πr^2) + 0.05(πR^2)

Substituting h in terms of r, we get:

C = 0.08πr(600/(πr^2)) + 0.04πr^2 + 0.05πR^2

= 4.8/r + 0.04πr^2 + 0.05πR^2

To minimize the cost, we need to find the values of r and R that minimize the cost function C. To do this, we take the partial derivatives of C with respect to r and R, and set them equal to zero:

dC/dr = -4.8/r^2 + 0.08πr = 0

dC/dR = 0.1πR = 0

Solving for r and R, we get:

r = ∛(60/π) ≈ 2.78 cm

R = 2.5 cm

We can check that these values give us a minimum by checking the second derivatives:

d^2C/dr^2 = 9.6/r^3 + 0.08π > 0 (minimum)

d^2C/dR^2 = 0.1π > 0 (minimum)

Therefore, the dimensions of the cylinder that minimize the production cost are:

radius = approximately 2.78 cm

height = 600 / (πr^2) ≈ 7.14 cm

paper top radius = 2.5 cm

To learn more about second derivatives visit: https://brainly.com/question/29090070

#SPJ11

The dimensions of the bookmark are length = 15 centimeters and width = 10 centimeters.

Let's denote the length of the bookmark as L and the width as W.

The area of a rectangle is given by the formula A = L * W, and the perimeter is given by P = 2L + 2W.

From the given information, we have two equations:

Equation 1: A = 150 square centimeters

Equation 2: P = 62 centimeters

Substituting the formulas for area and perimeter, we get:

Equation 1: L * W = 150

Equation 2: 2L + 2W = 62

To solve these equations, we can use substitution or elimination. Let's solve by substitution:

From Equation 1, we can express one variable in terms of the other:

L = 150 / W

Substituting this into Equation 2:

2(150 / W) + 2W = 62

300 / W + 2W = 62

300 + 2W^2 = 62W

2W^2 - 62W + 300 = 0

Now we have a quadratic equation. We can solve it by factoring, completing the square, or using the quadratic formula. In this case, let's use factoring:

[tex]2W^2 - 62W + 300 = 0[/tex]

(W - 10)(2W - 30) = 0

This gives us two possible solutions:

W - 10 = 0 -> W = 10

2W - 30 = 0 -> W = 15

Since the width cannot be longer than the length, we discard the solution W = 15.

So, the width of the bookmark is W = 10 centimeters.

Now, we can substitute this value into Equation 1 to find the length:

L * 10 = 150

L = 150 / 10

L = 15

To know more about quadratic formula,  refer here:

https://brainly.com/question/22364785

#SPJ11

The volume  33.5 cubic inches

To calculate the volume of the cylinder, we need to use the formula:

V = π[tex]r^2[/tex]h

where V is the volume, π is the constant pi, r is the radius of the base (which is half the diameter), and h is the height.

First, we need to convert the diameter of the cylinder to inches:

2 3/4 inches = (2*4 + 3)/4 inches = 11/4 inches

The radius of the cylinder is half the diameter, so:

r = (11/4)/2 = 11/8 inches

Now we can plug in the values into the formula:

V = π[tex](11/8)^2[/tex](11) cubic inches

V ≈ 33.5 cubic inches (rounded to the nearest tenth)

To know more about volume refer here

https://brainly.com/question/25282116#

The linear function rule that models the cost y of a package containing any number x of comic books is y = $6.50 + $1.00x and for 10 comic books, the second store has the better deal.

A linear function is a mathematical function where the graph of the function is a straight line. It can be written in the form y = mx + b, where x and y are the variables, m is the slope of the line, and b is the y-intercept (the point where the line intersects the y-axis). The slope represents the rate of change of the function, while the y-intercept is the value of the function when x is equal to zero.

To write a linear function rule that models the cost y of a package containing any number x of comic books, we can use the given information to set up a system of equations:

Poster + 2 Comics = $7.50

Poster + 11 Comics = $16.50

We can solve for the cost of the poster and the cost of one comic book by subtracting the first equation from the second:

9 Comics = $9.00

1 Comic = $1.00

Then, we can use the cost of one comic to set up a linear function rule:

y = cost of poster + cost of x comics

y = $6.50 + $1.00x

Therefore, the linear function rule that models the cost y of a package containing any number x of comic books is y = $6.50 + $1.00x.

For the second store, the linear function rule is given as y = $5.75 + $1.00x.

To determine which store has the better deal, we can compare the cost of each package for a specific number of comic books. For example, if we want to buy 10 comic books, the cost at the first store would be:

y = $6.50 + $1.00(10) = $16.50

The cost at the second store would be:

y = $5.75 + $1.00(10) = $15.75

Therefore, for 10 comic books, the second store has the better deal. However, for a different number of comic books, the better deal may be at a different store. We can use the linear function rules to compare the costs for any number of comic books

Learn more about Linear function here:

brainly.com/question/20286983

#SPJ1

Answer: AB = 16.4

Step-by-step explanation:

You can use tan x = opposite/adjacent

tan 38 = AB/21

21 tan 38 = AB

AB = 16.4

"It is typical for the person who is most difficult to convince in an argument to say that everyone else is stubborn." refers projection (option c).

To understand projection in mathematical terms, we can think of it as a function f(x), where x represents the individual's own thoughts or emotions. The output of the function, f(x), represents the projection of these thoughts or emotions onto someone else.

In the case of arguments, the person who is most difficult to convince may have a high value of x, indicating that they are feeling stubborn. However, instead of accepting this feeling, they project it onto others, resulting in a high value of f(x) for those around them.

Projection is just one example of the many defense mechanisms that humans use to protect themselves from unpleasant thoughts or emotions. Understanding these mechanisms can help us to better navigate difficult situations, including arguments, and improve our communication skills.

Hence the correct option is (c).

To know more about argument here

https://brainly.com/question/31218461

#SPJ4

1. This is not an example of a quasi-experimental design because the researcher randomly assigned participants to the two groups. In a quasi-experimental design, the researcher does not have full control over the assignment of participants to groups.

2. The dependent variable in this study is the word recall. It is the variable that the researcher is interested in measuring and is expected to be affected by the independent variable.

3. The independent variable in this study is sugar consumption. It is the variable that the researcher manipulated by assigning participants to one of two groups, sugar vs. no sugar.

The purpose of manipulating the independent variable is to examine its effect on the dependent variable, word recall.

To learn more about variable, refer below:

https://brainly.com/question/17344045

#SPJ11

The volume of the cone is approximately one-third the volume of the

cylinder

:V(cone) ≈ 1/3 V(cylinder) = 1/3 (9.4) ≈ 3.1 cubic feet.

The volume of a cone with the same height and radius as the given

cylinder, we can use the formula:

[tex]V = 1/3 πr²h[/tex]

where V is the volume, r is the radius, and h is the height.

Since the cylinder has a volume of approximately 9.4 cubic feet, we can

use the formula for the volume of a cylinder

:V = πr²hand solve for the radius:

[tex]r = √(V/πh) = √(9.4/πh)[/tex]

Now we can substitute this expression for the radius into the formula for

the volume of a cone:

[tex]V = 1/3 π(√(V/πh))²h[/tex]

Simplifying this expression gives:

[tex]V = 1/3 π(V/πh)hV = 1/3 V[/tex]

To know more about volume refer here https://brainly.com/question/1578538# #SPJ11

Both the limits are equal to 0: a. lim (x→∞) f(x) = 0 b. lim (x→-∞) f(x) = 0

Know more about rational function,

First, let's rewrite the rational function f(x) more clearly and identify the two limits we need to find: f(x) =[tex](x + 6) / (x^2 + 20)[/tex]

a. lim (x→∞) f(x) b. lim (x→-∞) f(x)

To find these limits, we can use the following steps:

Step 1: Divide both the numerator and the denominator by the highest power of x in the denominator.

In this case, it is x^2. f(x) = [tex][(x + 6) / x^2] / [(x^2 + 20) / x^2][/tex]

Step 2: Simplify the function. f(x) =[tex][(1/x) + (6/x^2)] / [1 + (20/x^2)][/tex]

Step 3: Evaluate the limits.

a. lim (x→∞) f(x)

= [(0) + (0)] / [1 + (0)]

= 0 / 1 = 0

b. lim (x→-∞) f(x)

= [(0) + (0)] / [1 + (0)]

= 0 / 1 = 0

So, both the limits are equal to 0: a. lim (x→∞) f(x) = 0 b. lim (x→-∞) f(x) = 0

Know more about rational function,

https://brainly.com/question/30339525

#SPJ11

Answer:  B   28√15

Step-by-step explanation:

They want you to find the Area of the quadrilateral.  But if you can find the area of 1 trangle then you can double it because the 2 triangles are congruent.

We know the 2 triangles are congruent from the theorem  (see diagram

We also know that  QR=TR=SR  They are all radius

Let's solve for triangle PRS

PR = hypotenuse = 10+7 =17

SR=7  radius

Use pythagorean to find PS

c²=a²+b²

17²=7²+b²

289 = 49 + b²

b²=289 -49

b² = 240

b=√240

b=[tex]\sqrt{16*15}[/tex]

b= 4√15  This is PS

Area of triangle = 1/2 bh       b=PS   h=7

Area of triangle = 1/2 (4√15)(7)

Area of triangle = (2√15)(7)

Area of triangle = 14√15

Area of quadrilateral = 2 (14√15)        > 2 triangles make the quadrilateral

Area of quadrilateral =  28√15

The variance of first n even natural numbers is n²-1/12. So, the correct option is (a) .

The first n even natural numbers can be represented as 2, 4, 6, ..., 2n. The mean or expected value of this sequence is given by:

mean = (2 + 4 + 6 + ... + 2n) / n

= 2(1 + 2 + 3 + ... + n) / n

= 2n(n+1)/2n

= n+1

The variance of a sequence is the average of the squared differences from the mean, so we need to calculate:

Var = [(2- (n+1))² + (4- (n+1))² + (6- (n+1))² + ... + (2n- (n+1))²] / n

Simplifying the expression inside the brackets and using the formula for the sum of the first n integers, we get:

Var = [4(1² + 2² + 3² + ... + n²) - 4(n+1)(1 + 2 + 3 + ... + n) + n(n+1)²] / n

Substituting the formula for the sum of the first n squares and the sum of the first n integers, we get:

Var = [4n(n+1)(2n+1)/6 - 4(n+1)n(n+1)/2 + n(n+1)²] / n

Simplifying and factoring out (n+1), we get:

Var = (n+1)(n² - 1) / 3

Thus, the correct option is (a) n²-1/12.

To learn more about variance click on,

https://brainly.com/question/16953345

#SPJ1

our final estimate for the area under the curve f(x)=1/x on [1,2] using 4 approximating rectangles and taking the average of the left and right endpoints is 0.76.

To estimate the area under the curve f(x)=1/x on [1,2], we can use 4 approximating rectangles.

a) Using left endpoints, the width of each rectangle is (2-1)/4 = 0.25. The left endpoints of the rectangles are 1, 1.25, 1.5, and 1.75. The height of each rectangle is f(x) evaluated at the left endpoint.

So, the heights are f(1) = 1/1 = 1, f(1.25) = 1/1.25 = 0.8,

f(1.5)=1/1.5 = 0.67, and f(1.75) = 1/1.75 = 0.57.

The area of each rectangle is width times height, so the areas are

0.25*1 = 0.25, 0.25*0.8 = 0.2, 0.25*0.67 = 0.1675, and 0.25*0.57 = 0.1425.

Adding these areas together, we get an estimate of the total area under the curve as

0.25 + 0.2 + 0.1675 + 0.1425 = 0.76.

b) Using right endpoints, the width of each rectangle is the same as before. The right endpoints of the rectangles are

1.25, 1.5, 1.75, and 2.

The heights are f(x) evaluated at the right endpoint. So, the heights are

f(1.25) = 0.8, f(1.5) = 0.67, f(1.75) = 0.57, and f(2) = 0.5.

The areas of the rectangles are the same as before, so adding them up, we get an estimate of the total area as

0.2 + 0.1675 + 0.1425 + 0.25 = 0.76,  

which is the same as before.
c) To get the average of the two estimates, we add them together and divide by 2:

(0.76+0.76) / 2 = 0.76.

To learn more about rectangles click here

brainly.com/question/29123947

#SPJ11

Based on the given situation we can conclude that the sedan retains its value better than the pickup truck over time.The functions S(t) and P(t) represent the values of the sedan and pickup truck, respectively, as a function of the number of years t after their purchase.

The coefficient 24,400 in the function S(t) represents the initial value of the sedan, which is the value of the car at t=0. The base 0.82 represents the decay rate or the percentage decrease in the value of the sedan each year. Similarly, in the function P(t), the coefficient 35,900 represents the initial value of the pickup truck and the base 0.71 represents the decay rate of the value of the pickup truck.

Since the base of the sedan's value decay is 0.82, it indicates that the value of the sedan decreases by 18% each year. Whereas the base of the pickup truck's value decay is 0.71, indicating that the value of the pickup truck decreases by 29% each year. Therefore, we can observe that the value of the pickup truck depreciates faster than the sedan. After two years, the value of the sedan would be approximately $16,650, and the value of the pickup truck would be approximately $14,161. After five years, the value of the sedan would be approximately $9,237, and the value of the pickup truck would be approximately $6,155.

To know more about functions click here

brainly.com/question/5975436

#SPJ11

Answer:

image dosent load

Step-by-step explanation:

Answer:

a = 80°, b = 100°, c = 80°, d = 100°

Step-by-step explanation:

You know a + b + c + d = 360°.

Plugging b + c + d = 280° into the formula above:

a + 280° = 360°.

a = 80°.

You know a + d = 180° because of angles on a straight line. Solve for d:

80° + d = 180°.

d = 100°.

For the same reason, you know a + b = 180°. b must be equal to d, which is 100°.

Lastly, c + d = 180° because they make up the second line. Solve for c:

c + 100° = 180°.

c = 80°.

a = 80°, b = 100°, c = 80°, d = 100°.

a) To find the total surface area of the cuboid, we need to find the area of each face and then add them up.

Area of one face = length x width

Area of top and bottom faces = 1.1 m x 0.55 m = 0.605 m² (2 faces)

Area of front and back faces = 2.2 m x 0.55 m = 1.21 m² (2 faces)

Area of side faces = 2.2 m x 1.1 m = 2.42 m² (2 faces)

Total surface area = (2 x 0.605) + (2 x 1.21) + (2 x 2.42) = 7.7 m²

Each tin of varnish covers 20 m², so Emma needs:

Number of tins = (total surface area x number of coats) / coverage per tin

Number of tins = (7.7 x 3) / 0.02 = 1155

Emma needs to buy 1155 tins of wood varnish.

b) The cost of each tin of varnish is $3.99 for 100 ml. To find the cost of 1155 tins, we first need to convert the volume of varnish needed into liters.

Volume of varnish needed = (total surface area x number of coats) / coverage per litre

Volume of varnish needed = (7.7 x 3) / 20 = 1.155 liters

The number of tins required to make up 1.155 liters of varnish is:

Number of tins = (1.155 / 0.1) = 11.55

So Emma needs to buy 12 tins of varnish. The total cost is:

Total cost = cost per tin x number of tins

Total cost = $3.99 x 12 = $47.88

The total cost of the wood varnish is $47.88.

To know more about cuboid refer here

https://brainly.com/question/29568631#

#SPJ11

Kimo should make 5 loads in the small truck and 4 loads in the large truck per day to minimize the total cost while meeting the delivery and union requirements.

What is the equivalent expression?

Equivalent expressions are expressions that perform the same function despite their appearance. If two algebraic expressions are equivalent, they have the same value when we use the same variable value.

the total cost will be minimized when the loads are distributed in the following way:

5 loads in the small truck (total capacity of 5 * 50 = 250 cubic yards)

4 loads in the large truck (total capacity of 4 * 70 = 280 cubic yards)

This will result in a total of 9 loads and a total capacity of 530 cubic yards, which meets both the daily minimum delivery requirement of 350 cubic yards and the union contract requirement of 9 loads per day.

The total cost can be calculated as follows:

Cost of 5 loads in small truck = 5 * $87 = $435

Cost of 4 loads in large truck = 4 * $73 = $292

Total cost per day = $435 + $292 = $727

Therefore, Kimo should make 5 loads in the small truck and 4 loads in the large truck per day to minimize the total cost while meeting the delivery and union requirements.

To learn more about the equivalent expression visit:

https://brainly.com/question/2972832

#SPJ4

For the Following the product function is f(x) = g(x) * h(x) = (9e^{-x} + ln(x)) * 4x^{2.7} and rate of change of function is f'(x) = 43.2x^{1.7}e^{-x} + 10.8x^{1.7}ln(x) - 36e^{-x}

For g(x) = 9e^{-x} + ln(x) and h(x) = 4x^{2.7}, we have:

(a) The product function is: f(x) = g(x) * h(x) = (9e^{-x} + ln(x)) * 4x^{2.7}

(b) The rate-of-change function is:

f'(x) = g'(x) * h(x) + g(x) * h'(x)

where g'(x) and h'(x) are the derivatives of g(x) and h(x), respectively.

Taking derivatives, we have:

g'(x) = -9e^{-x} + 1/x

h'(x) = 10.8x^{1.7}

Substituting into the formula for f'(x), we get:

f'(x) = (-9e^{-x} + 1/x) * 4x^2.7 + (9e^{-x} + ln(x)) * 10.8x^{1.7}

Simplifying, we get:

f'(x) = 43.2x^{1.7}e^{-x} + 10.8x^{1.7}ln(x) - 36e^{-x}

To practice more questions about product function:

https://brainly.com/question/25638609

#SPJ11

Answer:

Step-by-step explanation:

√4x^2=2x

The sum of all edges of the regular quadrilateral prism is 108 cm.

To find the sum of all edges of a regular quadrilateral prism with height h = 11 cm and base edges b = 8 cm, follow these steps:

1. Determine the number of base edges: A quadrilateral has 4 edges, so there are 4 base edges for the top and 4 for the bottom, totaling 8 base edges.
2. Determine the number of height edges: There are 4 vertical edges connecting the top and bottom bases.
3. Add the number of base and height edges: 8 base edges + 4 height edges = 12 edges in total.
4. Calculate the sum of all edge lengths: (8 base edges (8 cm)) + (4 height edges (11 cm)) = 64 cm + 44 cm = 108 cm.

So, the sum of all edges of the regular quadrilateral prism is 108 cm.

To know more about "Quadrilateral prism" refer here:

https://brainly.com/question/9982469#

#SPJ11

Answer:

y=f(x) = log7x

Just trust me

The graph best represents the function y = f(x) = 7x, an exponential function.

The graph represents the function y = 7x, which is an exponential function. In an exponential function, the variable x is the base, and the exponent is a constant, which in this case is 7. This means that the function grows rapidly as x increases, creating a steep curve on the graph.

The other two options, y = f(x) = log7x and y = f(x) = x7, are not represented by the given graph.

The function y = f(x) = log7x is a logarithmic function, which has a different shape on the graph, with a horizontal asymptote and the x-axis acting as its asymptote.

The function y = f(x) = x7 is a polynomial function, where x is raised to the power of 7, and it would have a different pattern on the graph compared to the exponential function shown.

Thus, the graph best represents the function y = f(x) = 7x, an exponential function.

To know more about function:

https://brainly.com/question/30721594

#SPJ2

Answer:..

Step-by-step explanation:Use the distance formula to find the length of each side and then add the lengths.

Use the slope formula to find the slope of each of side, and then determine if the opposite sides are parallel.

Use the slope formula to find the slope of each of side, and then determine if the consecutive sides are perpendicular.

Use the distance formula to find the length of the sides, and then multiply two of the side lengths.

The area of the playground include the following: 900 square yards.

In Mathematics and Geometry, the area of a regular polygon can be calculated by using this formula:

Area = (n × s × a)/2

Where:

In Mathematics and Geometry, the area of a parallelogram can be calculated by using the following formula:

Area of a parallelogram, A = base area × height

Area of playground, A = 45 × 20

Area of a playground, A = 900 square yards.

Read more on polygon here: brainly.com/question/16691874

#SPJ1

The average price of milk in 2018 was $6.45 per gallon.

The average price of milk in 2021 was $189.15 per gallon.

When x = 0 (which represents the year 2018), the function becomes:

3.55 + 2.90(1 + 0)³

= 3.55 + 2.90(1)³

= 3.55 + 2.90

= 6.45

The average price of milk in 2018 was $6.45 per gallon.

When x = 3 (which represents the year 2021), the function becomes:

3.55 + 2.90(1 + 3)³

= 3.55 + 2.90(4)³

= 3.55 + 2.90(64)

= 3.55 + 185.6

= 189.15

The average price of milk in 2021 was $189.15 per gallon.

Learn more about average on

https://brainly.com/question/20118982

#SPJ1

Answer:

shape a is 20 cm squared

Step-by-step explanation:

shape a is a parallogram, A =b×h. 5x4=20

shape b is a trapezoid. The picture is cut off but here are the steps for you to solve. A=0.5h(base1+base2) count the number of squares on the top and bottom of the shape. I can see the top is 2, you will need to tfind the length of the bottom base.then count the height, how far to get from the bottom to top, here it is 4.

area=0.5*4(2+bottom base) simply and that's your answer! Don't forget your units

Answer:  First, we need to find the composite function (fg)(x):

(fg)(x) = f(g(x))

= f(-4x-3)

= (-4x-3)^2 + (-4x-3) + 9 (substituting g(x) into f(x))

= 16x^2 + 24x + 18

Therefore, (fg)(x) = 16x^2 + 24x + 18.

Next, we need to find the quotient function (f/g)(x):

(f/g)(x) = f(x) / g(x)

= (x^2 + x + 9) / (-4x - 3) (substituting f(x) and g(x))

To simplify this expression, we can use polynomial long division or synthetic division. Using synthetic division, we get:

  -4 |   1    1    9

      |_____-4__ 12

      |  1  -3   21

Therefore, (f/g)(x) = -4x + 3 - 21 / (-4x - 3)

Simplifying further, we get:

(f/g)(x) = -4x + 3 + (21/4)(1/(x + 3/4))

Therefore, (f/g)(x) = -4x + 3 + (21/4)(1/(x + 3/4)).

Step-by-step explanation:

If kawan paints the visible outside faces of her shed, she paints two rectangle faces and two triangle faces then the total surface area that she paints is 88ft².

The area of a triangle of altitude h and base b is given by;

A = 0.5bh

Therefore the area of one triangle face ;

At = 0.5 × 8 × 5

At = 20ft²

Area of a rectangle of length l and breadth b is;

A = lb

Therefore the area of a rectangle face;

Ar = 8 × 3

Ar = 24ft²

We have 2 triangle faces and 2 rectangle face, therefore total surface area as;

A = 2At + 2Ar

A  = 2×20 + 2×24

A = 40 + 48

A = 88ft²

Therefore the answer is; 88ft².

To know more on surface area;

brainly.com/question/29183306

#SPJ1

Step-by-step explanation:

To determine the appropriate fraction for the line plot, we need to find the greatest common factor (GCF) of all the pencil lengths, and then express each length as an equivalent fraction with the GCF as the denominator.

The GCF of the pencil lengths is 1. Therefore, we can simply express each pencil length as an equivalent fraction with 1 as the denominator:

3/1, 7/1, 8/1, 5/1, 1/1, 4/1, 6/1, 8/1, 4/1, 2/1, 5/1

Now, we can see that the smallest unit increment we can use on the line plot is 1/8. This is because 1/8 is the smallest fraction that can represent all of the pencil lengths above the label (5/8, which is equivalent to 10/16).

Therefore, the students should use 1/8 as the fraction for the line plot.

Answer:

b

Step-by-step explanation:

point B has coordinates (0, 0 ) which is the origin

Answer:

x = 18

Step-by-step explanation:

We Know

(10x - 4) + (x - 14) must equal 180°

Find the value of x.

Let's solve

10x - 4 + x - 14 = 180

11x - 18 = 180

11x = 198

x = 18

So, x = 18 is the answer.

Clarissa needs a total of 251.25 square inches of construction paper for her project.

To find the total area of construction paper needed, we need to find the area of each rectangle and add them together.

The first rectangle has an area of 10 inches × 14.5 inches = 145 square inches.

The second rectangle has an area of 10.25 inches × 10.5 inches = 107.625 square inches.

Adding these two areas together, we get a total of 145 + 107.625 = 252.625 square inches.

Therefore, Clarissa needs a total of 251.25 square inches (rounded to two decimal places) of construction paper for her project.

For more questions like Rectangle click the link below:

https://brainly.com/question/29123947

#SPJ11